diff options
Diffstat (limited to 'drivers/net/phy/dp83867.c')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 41 |
1 files changed, 38 insertions, 3 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index c1ab976cc800..e03e91d5f1b1 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -33,10 +33,18 @@ /* Extended Registers */ #define DP83867_CFG4 0x0031 +#define DP83867_CFG4_SGMII_ANEG_MASK (BIT(5) | BIT(6)) +#define DP83867_CFG4_SGMII_ANEG_TIMER_11MS (3 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_800US (2 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_2US (1 << 5) +#define DP83867_CFG4_SGMII_ANEG_TIMER_16MS (0 << 5) + #define DP83867_RGMIICTL 0x0032 #define DP83867_STRAP_STS1 0x006E #define DP83867_RGMIIDCTL 0x0086 #define DP83867_IO_MUX_CFG 0x0170 +#define DP83867_10M_SGMII_CFG 0x016F +#define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7) #define DP83867_SW_RESET BIT(15) #define DP83867_SW_RESTART BIT(14) @@ -249,10 +257,8 @@ static int dp83867_config_init(struct phy_device *phydev) ret = phy_write(phydev, MII_DP83867_PHYCTRL, val); if (ret) return ret; - } - if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) && - (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) { + /* Set up RGMII delays */ val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIICTL); if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) @@ -285,6 +291,35 @@ static int dp83867_config_init(struct phy_device *phydev) } } + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + /* For support SPEED_10 in SGMII mode + * DP83867_10M_SGMII_RATE_ADAPT bit + * has to be cleared by software. That + * does not affect SPEED_100 and + * SPEED_1000. + */ + val = phy_read_mmd(phydev, DP83867_DEVADDR, + DP83867_10M_SGMII_CFG); + val &= ~DP83867_10M_SGMII_RATE_ADAPT_MASK; + ret = phy_write_mmd(phydev, DP83867_DEVADDR, + DP83867_10M_SGMII_CFG, val); + + if (ret) + return ret; + + /* After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 + * are 01). That is not enough to finalize autoneg on some + * devices. Increase this timer duration to maximum 16ms. + */ + val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4); + val &= ~DP83867_CFG4_SGMII_ANEG_MASK; + val |= DP83867_CFG4_SGMII_ANEG_TIMER_16MS; + ret = phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val); + + if (ret) + return ret; + } + /* Enable Interrupt output INT_OE in CFG3 register */ if (phy_interrupt_is_valid(phydev)) { val = phy_read(phydev, DP83867_CFG3); |