summaryrefslogtreecommitdiff
path: root/drivers/net/stmmac/stmmac_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/stmmac/stmmac_main.c')
-rw-r--r--drivers/net/stmmac/stmmac_main.c2204
1 files changed, 2204 insertions, 0 deletions
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
new file mode 100644
index 000000000000..c2f14dc9ba28
--- /dev/null
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -0,0 +1,2204 @@
+/*******************************************************************************
+ This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
+ ST Ethernet IPs are built around a Synopsys IP Core.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+ Documentation available at:
+ http://www.stlinux.com
+ Support available at:
+ https://bugzilla.stlinux.com/
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
+#include <linux/stm/soc.h>
+#include "stmmac.h"
+
+#define STMMAC_RESOURCE_NAME "stmmaceth"
+#define PHY_RESOURCE_NAME "stmmacphy"
+
+#undef STMMAC_DEBUG
+/*#define STMMAC_DEBUG*/
+#ifdef STMMAC_DEBUG
+#define DBG(nlevel, klevel, fmt, args...) \
+ ((void)(netif_msg_##nlevel(priv) && \
+ printk(KERN_##klevel fmt, ## args)))
+#else
+#define DBG(nlevel, klevel, fmt, args...) do { } while (0)
+#endif
+
+#undef STMMAC_RX_DEBUG
+/*#define STMMAC_RX_DEBUG*/
+#ifdef STMMAC_RX_DEBUG
+#define RX_DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define RX_DBG(fmt, args...) do { } while (0)
+#endif
+
+#undef STMMAC_XMIT_DEBUG
+/*#define STMMAC_XMIT_DEBUG*/
+#ifdef STMMAC_TX_DEBUG
+#define TX_DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define TX_DBG(fmt, args...) do { } while (0)
+#endif
+
+#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
+#define JUMBO_LEN 9000
+
+/* Module parameters */
+#define TX_TIMEO 5000 /* default 5 seconds */
+static int watchdog = TX_TIMEO;
+module_param(watchdog, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
+
+static int debug = -1; /* -1: default, 0: no output, 16: all */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)");
+
+static int phyaddr = -1;
+module_param(phyaddr, int, S_IRUGO);
+MODULE_PARM_DESC(phyaddr, "Physical device address");
+
+#define DMA_TX_SIZE 256
+static int dma_txsize = DMA_TX_SIZE;
+module_param(dma_txsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list");
+
+#define DMA_RX_SIZE 256
+static int dma_rxsize = DMA_RX_SIZE;
+module_param(dma_rxsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list");
+
+static int flow_ctrl = FLOW_OFF;
+module_param(flow_ctrl, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
+
+static int pause = PAUSE_TIME;
+module_param(pause, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pause, "Flow Control Pause Time");
+
+#define TC_DEFAULT 64
+static int tc = TC_DEFAULT;
+module_param(tc, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tc, "DMA threshold control value");
+
+#define RX_NO_COALESCE 1 /* Always interrupt on completion */
+#define TX_NO_COALESCE -1 /* No moderation by default */
+
+/* Pay attention to tune this parameter; take care of both
+ * hardware capability and network stabitily/performance impact.
+ * Many tests showed that ~4ms latency seems to be good enough. */
+#ifdef CONFIG_STMMAC_TIMER
+#define DEFAULT_PERIODIC_RATE 256
+static int tmrate = DEFAULT_PERIODIC_RATE;
+module_param(tmrate, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)");
+#endif
+
+#define DMA_BUFFER_SIZE BUF_SIZE_2KiB
+static int buf_sz = DMA_BUFFER_SIZE;
+module_param(buf_sz, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(buf_sz, "DMA buffer size");
+
+/* In case of Giga ETH, we can enable/disable the COE for the
+ * transmit HW checksum computation.
+ * Note that, if tx csum is off in HW, SG will be still supported. */
+static int tx_coe = HW_CSUM;
+module_param(tx_coe, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]");
+
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_IFUP |
+ NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+/**
+ * stmmac_verify_args - verify the driver parameters.
+ * Description: it verifies if some wrong parameter is passed to the driver.
+ * Note that wrong parameters are replaced with the default values.
+ */
+static void stmmac_verify_args(void)
+{
+ if (unlikely(watchdog < 0))
+ watchdog = TX_TIMEO;
+ if (unlikely(dma_rxsize < 0))
+ dma_rxsize = DMA_RX_SIZE;
+ if (unlikely(dma_txsize < 0))
+ dma_txsize = DMA_TX_SIZE;
+ if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB)))
+ buf_sz = DMA_BUFFER_SIZE;
+ if (unlikely(flow_ctrl > 1))
+ flow_ctrl = FLOW_AUTO;
+ else if (likely(flow_ctrl < 0))
+ flow_ctrl = FLOW_OFF;
+ if (unlikely((pause < 0) || (pause > 0xffff)))
+ pause = PAUSE_TIME;
+
+ return;
+}
+
+#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
+static void print_pkt(unsigned char *buf, int len)
+{
+ int j;
+ pr_info("len = %d byte, buf addr: 0x%p", len, buf);
+ for (j = 0; j < len; j++) {
+ if ((j % 16) == 0)
+ pr_info("\n %03x:", j);
+ pr_info(" %02x", buf[j]);
+ }
+ pr_info("\n");
+ return;
+}
+#endif
+
+/* minimum number of free TX descriptors required to wake up TX process */
+#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4)
+
+static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
+{
+ return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
+}
+
+/**
+ * stmmac_adjust_link
+ * @dev: net device structure
+ * Description: it adjusts the link parameters.
+ */
+static void stmmac_adjust_link(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phydev;
+ unsigned long ioaddr = dev->base_addr;
+ unsigned long flags;
+ int new_state = 0;
+ unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
+
+ if (phydev == NULL)
+ return;
+
+ DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n",
+ phydev->addr, phydev->link);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (phydev->link) {
+ u32 ctrl = readl(ioaddr + MAC_CTRL_REG);
+
+ /* Now we make sure that we can be in full duplex mode.
+ * If not, we operate in half-duplex mode. */
+ if (phydev->duplex != priv->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
+ ctrl &= ~priv->mac_type->hw.link.duplex;
+ else
+ ctrl |= priv->mac_type->hw.link.duplex;
+ priv->oldduplex = phydev->duplex;
+ }
+ /* Flow Control operation */
+ if (phydev->pause)
+ priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex,
+ fc, pause_time);
+
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ switch (phydev->speed) {
+ case 1000:
+ if (likely(priv->is_gmac))
+ ctrl &= ~priv->mac_type->hw.link.port;
+ break;
+ case 100:
+ case 10:
+ if (priv->is_gmac) {
+ ctrl |= priv->mac_type->hw.link.port;
+ if (phydev->speed == SPEED_100) {
+ ctrl |=
+ priv->mac_type->hw.link.
+ speed;
+ } else {
+ ctrl &=
+ ~(priv->mac_type->hw.
+ link.speed);
+ }
+ } else {
+ ctrl &= ~priv->mac_type->hw.link.port;
+ }
+ priv->fix_mac_speed(priv->bsp_priv,
+ phydev->speed);
+ break;
+ default:
+ if (netif_msg_link(priv))
+ pr_warning("%s: Speed (%d) is not 10"
+ " or 100!\n", dev->name, phydev->speed);
+ break;
+ }
+
+ priv->speed = phydev->speed;
+ }
+
+ writel(ctrl, ioaddr + MAC_CTRL_REG);
+
+ if (!priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 1;
+ }
+ } else if (priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 0;
+ priv->speed = 0;
+ priv->oldduplex = -1;
+ }
+
+ if (new_state && netif_msg_link(priv))
+ phy_print_status(phydev);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
+}
+
+/**
+ * stmmac_init_phy - PHY initialization
+ * @dev: net device structure
+ * Description: it initializes the driver's PHY state, and attaches the PHY
+ * to the mac driver.
+ * Return value:
+ * 0 on success
+ */
+static int stmmac_init_phy(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev;
+ char phy_id[BUS_ID_SIZE]; /* PHY to connect */
+ char bus_id[BUS_ID_SIZE];
+
+ priv->oldlink = 0;
+ priv->speed = 0;
+ priv->oldduplex = -1;
+
+ if (priv->phy_addr == -1) {
+ /* We don't have a PHY, so do nothing */
+ return 0;
+ }
+
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
+
+ phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0,
+ priv->phy_interface);
+
+ if (IS_ERR(phydev)) {
+ pr_err("%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phydev);
+ }
+
+ /*
+ * Broken HW is sometimes missing the pull-up resistor on the
+ * MDIO line, which results in reads to non-existent devices returning
+ * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+ * device as well.
+ * Note: phydev->phy_id is the result of reading the UID PHY registers.
+ */
+ if (phydev->phy_id == 0) {
+ phy_disconnect(phydev);
+ return -ENODEV;
+ }
+ pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
+ " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
+
+ priv->phydev = phydev;
+
+ return 0;
+}
+
+static inline void stmmac_mac_enable_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value |= MAC_RNABLE_RX;
+ /* Set the RE (receive enable bit into the MAC CTRL register). */
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_enable_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value |= MAC_ENABLE_TX;
+ /* Set the TE (transmit enable bit into the MAC CTRL register). */
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_disable_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value &= ~MAC_RNABLE_RX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_disable_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value &= ~MAC_ENABLE_TX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+/**
+ * display_ring
+ * @p: pointer to the ring.
+ * @size: size of the ring.
+ * Description: display all the descriptors within the ring.
+ */
+static void display_ring(struct dma_desc *p, int size)
+{
+ struct tmp_s {
+ u64 a;
+ unsigned int b;
+ unsigned int c;
+ };
+ int i;
+ for (i = 0; i < size; i++) {
+ struct tmp_s *x = (struct tmp_s *)(p + i);
+ pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
+ i, (unsigned int)virt_to_phys(&p[i]),
+ (unsigned int)(x->a), (unsigned int)((x->a) >> 32),
+ x->b, x->c);
+ pr_info("\n");
+ }
+}
+
+/**
+ * init_dma_desc_rings - init the RX/TX descriptor rings
+ * @dev: net device structure
+ * Description: this function initializes the DMA RX/TX descriptors
+ * and allocates the socket buffers.
+ */
+static void init_dma_desc_rings(struct net_device *dev)
+{
+ int i;
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb;
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int rxsize = priv->dma_rx_size;
+ unsigned int bfsize = priv->dma_buf_sz;
+ int buff2_needed = 0;
+ int dis_ic = 0;
+
+#ifdef CONFIG_STMMAC_TIMER
+ /* Using Timers disable interrupts on completion for the reception */
+ dis_ic = 1;
+#endif
+ /* Set the Buffer size according to the MTU;
+ * indeed, in case of jumbo we need to bump-up the buffer sizes.
+ */
+ if (unlikely(dev->mtu >= BUF_SIZE_8KiB))
+ bfsize = BUF_SIZE_16KiB;
+ else if (unlikely(dev->mtu >= BUF_SIZE_4KiB))
+ bfsize = BUF_SIZE_8KiB;
+ else if (unlikely(dev->mtu >= BUF_SIZE_2KiB))
+ bfsize = BUF_SIZE_4KiB;
+ else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE))
+ bfsize = BUF_SIZE_2KiB;
+ else
+ bfsize = DMA_BUFFER_SIZE;
+
+ /* If the MTU exceeds 8k so use the second buffer in the chain */
+ if (bfsize >= BUF_SIZE_8KiB)
+ buff2_needed = 1;
+
+ DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n",
+ txsize, rxsize, bfsize);
+
+ priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL);
+ priv->rx_skbuff =
+ kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL);
+ priv->dma_rx =
+ (struct dma_desc *)dma_alloc_coherent(priv->device,
+ rxsize *
+ sizeof(struct dma_desc),
+ &priv->dma_rx_phy,
+ GFP_KERNEL);
+ priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize,
+ GFP_KERNEL);
+ priv->dma_tx =
+ (struct dma_desc *)dma_alloc_coherent(priv->device,
+ txsize *
+ sizeof(struct dma_desc),
+ &priv->dma_tx_phy,
+ GFP_KERNEL);
+
+ if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) {
+ pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__);
+ return;
+ }
+
+ DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, "
+ "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n",
+ dev->name, priv->dma_rx, priv->dma_tx,
+ (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy);
+
+ /* RX INITIALIZATION */
+ DBG(probe, INFO, "stmmac: SKB addresses:\n"
+ "skb\t\tskb data\tdma data\n");
+
+ for (i = 0; i < rxsize; i++) {
+ struct dma_desc *p = priv->dma_rx + i;
+
+ skb = netdev_alloc_skb_ip_align(dev, bfsize);
+ if (unlikely(skb == NULL)) {
+ pr_err("%s: Rx init fails; skb is NULL\n", __func__);
+ break;
+ }
+ priv->rx_skbuff[i] = skb;
+ priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
+ bfsize, DMA_FROM_DEVICE);
+
+ p->des2 = priv->rx_skbuff_dma[i];
+ if (unlikely(buff2_needed))
+ p->des3 = p->des2 + BUF_SIZE_8KiB;
+ DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
+ priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]);
+ }
+ priv->cur_rx = 0;
+ priv->dirty_rx = (unsigned int)(i - rxsize);
+ priv->dma_buf_sz = bfsize;
+ buf_sz = bfsize;
+
+ /* TX INITIALIZATION */
+ for (i = 0; i < txsize; i++) {
+ priv->tx_skbuff[i] = NULL;
+ priv->dma_tx[i].des2 = 0;
+ }
+ priv->dirty_tx = 0;
+ priv->cur_tx = 0;
+
+ /* Clear the Rx/Tx descriptors */
+ priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize);
+
+ if (netif_msg_hw(priv)) {
+ pr_info("RX descriptor ring:\n");
+ display_ring(priv->dma_rx, rxsize);
+ pr_info("TX descriptor ring:\n");
+ display_ring(priv->dma_tx, txsize);
+ }
+ return;
+}
+
+static void dma_free_rx_skbufs(struct stmmac_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->dma_rx_size; i++) {
+ if (priv->rx_skbuff[i]) {
+ dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+ dev_kfree_skb_any(priv->rx_skbuff[i]);
+ }
+ priv->rx_skbuff[i] = NULL;
+ }
+ return;
+}
+
+static void dma_free_tx_skbufs(struct stmmac_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->dma_tx_size; i++) {
+ if (priv->tx_skbuff[i] != NULL) {
+ struct dma_desc *p = priv->dma_tx + i;
+ if (p->des2)
+ dma_unmap_single(priv->device, p->des2,
+ priv->mac_type->ops->get_tx_len(p),
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(priv->tx_skbuff[i]);
+ priv->tx_skbuff[i] = NULL;
+ }
+ }
+ return;
+}
+
+static void free_dma_desc_resources(struct stmmac_priv *priv)
+{
+ /* Release the DMA TX/RX socket buffers */
+ dma_free_rx_skbufs(priv);
+ dma_free_tx_skbufs(priv);
+
+ /* Free the region of consistent memory previously allocated for
+ * the DMA */
+ dma_free_coherent(priv->device,
+ priv->dma_tx_size * sizeof(struct dma_desc),
+ priv->dma_tx, priv->dma_tx_phy);
+ dma_free_coherent(priv->device,
+ priv->dma_rx_size * sizeof(struct dma_desc),
+ priv->dma_rx, priv->dma_rx_phy);
+ kfree(priv->rx_skbuff_dma);
+ kfree(priv->rx_skbuff);
+ kfree(priv->tx_skbuff);
+
+ return;
+}
+
+/**
+ * stmmac_dma_start_tx
+ * @ioaddr: device I/O address
+ * Description: this function starts the DMA tx process.
+ */
+static void stmmac_dma_start_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+static void stmmac_dma_stop_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+/**
+ * stmmac_dma_start_rx
+ * @ioaddr: device I/O address
+ * Description: this function starts the DMA rx process.
+ */
+static void stmmac_dma_start_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+static void stmmac_dma_stop_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+/**
+ * stmmac_dma_operation_mode - HW DMA operation mode
+ * @priv : pointer to the private device structure.
+ * Description: it sets the DMA operation mode: tx/rx DMA thresholds
+ * or Store-And-Forward capability. It also verifies the COE for the
+ * transmission in case of Giga ETH.
+ */
+static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
+{
+ if (!priv->is_gmac) {
+ /* MAC 10/100 */
+ priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0);
+ priv->tx_coe = NO_HW_CSUM;
+ } else {
+ if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) {
+ priv->mac_type->ops->dma_mode(priv->dev->base_addr,
+ SF_DMA_MODE, SF_DMA_MODE);
+ tc = SF_DMA_MODE;
+ priv->tx_coe = HW_CSUM;
+ } else {
+ /* Checksum computation is performed in software. */
+ priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc,
+ SF_DMA_MODE);
+ priv->tx_coe = NO_HW_CSUM;
+ }
+ }
+ tx_coe = priv->tx_coe;
+
+ return;
+}
+
+#ifdef STMMAC_DEBUG
+/**
+ * show_tx_process_state
+ * @status: tx descriptor status field
+ * Description: it shows the Transmit Process State for CSR5[22:20]
+ */
+static void show_tx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- TX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- TX (Running):Fetching the Tx desc\n");
+ break;
+ case 2:
+ pr_info("- TX (Running): Waiting for end of tx\n");
+ break;
+ case 3:
+ pr_info("- TX (Running): Reading the data "
+ "and queuing the data into the Tx buf\n");
+ break;
+ case 6:
+ pr_info("- TX (Suspended): Tx Buff Underflow "
+ "or an unavailable Transmit descriptor\n");
+ break;
+ case 7:
+ pr_info("- TX (Running): Closing Tx descriptor\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+
+/**
+ * show_rx_process_state
+ * @status: rx descriptor status field
+ * Description: it shows the Receive Process State for CSR5[19:17]
+ */
+static void show_rx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- RX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- RX (Running): Fetching the Rx desc\n");
+ break;
+ case 2:
+ pr_info("- RX (Running):Checking for end of pkt\n");
+ break;
+ case 3:
+ pr_info("- RX (Running): Waiting for Rx pkt\n");
+ break;
+ case 4:
+ pr_info("- RX (Suspended): Unavailable Rx buf\n");
+ break;
+ case 5:
+ pr_info("- RX (Running): Closing Rx descriptor\n");
+ break;
+ case 6:
+ pr_info("- RX(Running): Flushing the current frame"
+ " from the Rx buf\n");
+ break;
+ case 7:
+ pr_info("- RX (Running): Queuing the Rx frame"
+ " from the Rx buf into memory\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+#endif
+
+/**
+ * stmmac_tx:
+ * @priv: private driver structure
+ * Description: it reclaims resources after transmission completes.
+ */
+static void stmmac_tx(struct stmmac_priv *priv)
+{
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned long ioaddr = priv->dev->base_addr;
+
+ while (priv->dirty_tx != priv->cur_tx) {
+ int last;
+ unsigned int entry = priv->dirty_tx % txsize;
+ struct sk_buff *skb = priv->tx_skbuff[entry];
+ struct dma_desc *p = priv->dma_tx + entry;
+
+ /* Check if the descriptor is owned by the DMA. */
+ if (priv->mac_type->ops->get_tx_owner(p))
+ break;
+
+ /* Verify tx error by looking at the last segment */
+ last = priv->mac_type->ops->get_tx_ls(p);
+ if (likely(last)) {
+ int tx_error =
+ priv->mac_type->ops->tx_status(&priv->dev->stats,
+ &priv->xstats,
+ p, ioaddr);
+ if (likely(tx_error == 0)) {
+ priv->dev->stats.tx_packets++;
+ priv->xstats.tx_pkt_n++;
+ } else
+ priv->dev->stats.tx_errors++;
+ }
+ TX_DBG("%s: curr %d, dirty %d\n", __func__,
+ priv->cur_tx, priv->dirty_tx);
+
+ if (likely(p->des2))
+ dma_unmap_single(priv->device, p->des2,
+ priv->mac_type->ops->get_tx_len(p),
+ DMA_TO_DEVICE);
+ if (unlikely(p->des3))
+ p->des3 = 0;
+
+ if (likely(skb != NULL)) {
+ /*
+ * If there's room in the queue (limit it to size)
+ * we add this skb back into the pool,
+ * if it's the right size.
+ */
+ if ((skb_queue_len(&priv->rx_recycle) <
+ priv->dma_rx_size) &&
+ skb_recycle_check(skb, priv->dma_buf_sz))
+ __skb_queue_head(&priv->rx_recycle, skb);
+ else
+ dev_kfree_skb(skb);
+
+ priv->tx_skbuff[entry] = NULL;
+ }
+
+ priv->mac_type->ops->release_tx_desc(p);
+
+ entry = (++priv->dirty_tx) % txsize;
+ }
+ if (unlikely(netif_queue_stopped(priv->dev) &&
+ stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) {
+ netif_tx_lock(priv->dev);
+ if (netif_queue_stopped(priv->dev) &&
+ stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
+ TX_DBG("%s: restart transmit\n", __func__);
+ netif_wake_queue(priv->dev);
+ }
+ netif_tx_unlock(priv->dev);
+ }
+ return;
+}
+
+static inline void stmmac_enable_irq(struct stmmac_priv *priv)
+{
+#ifndef CONFIG_STMMAC_TIMER
+ writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
+#else
+ priv->tm->timer_start(tmrate);
+#endif
+}
+
+static inline void stmmac_disable_irq(struct stmmac_priv *priv)
+{
+#ifndef CONFIG_STMMAC_TIMER
+ writel(0, priv->dev->base_addr + DMA_INTR_ENA);
+#else
+ priv->tm->timer_stop();
+#endif
+}
+
+static int stmmac_has_work(struct stmmac_priv *priv)
+{
+ unsigned int has_work = 0;
+ int rxret, tx_work = 0;
+
+ rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx +
+ (priv->cur_rx % priv->dma_rx_size));
+
+ if (priv->dirty_tx != priv->cur_tx)
+ tx_work = 1;
+
+ if (likely(!rxret || tx_work))
+ has_work = 1;
+
+ return has_work;
+}
+
+static inline void _stmmac_schedule(struct stmmac_priv *priv)
+{
+ if (likely(stmmac_has_work(priv))) {
+ stmmac_disable_irq(priv);
+ napi_schedule(&priv->napi);
+ }
+}
+
+#ifdef CONFIG_STMMAC_TIMER
+void stmmac_schedule(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ priv->xstats.sched_timer_n++;
+
+ _stmmac_schedule(priv);
+
+ return;
+}
+
+static void stmmac_no_timer_started(unsigned int x)
+{;
+};
+
+static void stmmac_no_timer_stopped(void)
+{;
+};
+#endif
+
+/**
+ * stmmac_tx_err:
+ * @priv: pointer to the private device structure
+ * Description: it cleans the descriptors and restarts the transmission
+ * in case of errors.
+ */
+static void stmmac_tx_err(struct stmmac_priv *priv)
+{
+ netif_stop_queue(priv->dev);
+
+ stmmac_dma_stop_tx(priv->dev->base_addr);
+ dma_free_tx_skbufs(priv);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+ priv->dirty_tx = 0;
+ priv->cur_tx = 0;
+ stmmac_dma_start_tx(priv->dev->base_addr);
+
+ priv->dev->stats.tx_errors++;
+ netif_wake_queue(priv->dev);
+
+ return;
+}
+
+/**
+ * stmmac_dma_interrupt - Interrupt handler for the driver
+ * @dev: net device structure
+ * Description: Interrupt handler for the driver (DMA).
+ */
+static void stmmac_dma_interrupt(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct stmmac_priv *priv = netdev_priv(dev);
+ /* read the status register (CSR5) */
+ u32 intr_status = readl(ioaddr + DMA_STATUS);
+
+ DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
+
+#ifdef STMMAC_DEBUG
+ /* It displays the DMA transmit process state (CSR5 register) */
+ if (netif_msg_tx_done(priv))
+ show_tx_process_state(intr_status);
+ if (netif_msg_rx_status(priv))
+ show_rx_process_state(intr_status);
+#endif
+ /* ABNORMAL interrupts */
+ if (unlikely(intr_status & DMA_STATUS_AIS)) {
+ DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
+ if (unlikely(intr_status & DMA_STATUS_UNF)) {
+ DBG(intr, INFO, "transmit underflow\n");
+ if (unlikely(tc != SF_DMA_MODE)
+ && (tc <= 256)) {
+ /* Try to bump up the threshold */
+ tc += 64;
+ priv->mac_type->ops->dma_mode(ioaddr, tc,
+ SF_DMA_MODE);
+ priv->xstats.threshold = tc;
+ }
+ stmmac_tx_err(priv);
+ priv->xstats.tx_undeflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TJT)) {
+ DBG(intr, INFO, "transmit jabber\n");
+ priv->xstats.tx_jabber_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_OVF)) {
+ DBG(intr, INFO, "recv overflow\n");
+ priv->xstats.rx_overflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RU)) {
+ DBG(intr, INFO, "receive buffer unavailable\n");
+ priv->xstats.rx_buf_unav_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RPS)) {
+ DBG(intr, INFO, "receive process stopped\n");
+ priv->xstats.rx_process_stopped_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RWT)) {
+ DBG(intr, INFO, "receive watchdog\n");
+ priv->xstats.rx_watchdog_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_ETI)) {
+ DBG(intr, INFO, "transmit early interrupt\n");
+ priv->xstats.tx_early_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TPS)) {
+ DBG(intr, INFO, "transmit process stopped\n");
+ priv->xstats.tx_process_stopped_irq++;
+ stmmac_tx_err(priv);
+ }
+ if (unlikely(intr_status & DMA_STATUS_FBI)) {
+ DBG(intr, INFO, "fatal bus error\n");
+ priv->xstats.fatal_bus_error_irq++;
+ stmmac_tx_err(priv);
+ }
+ }
+
+ /* TX/RX NORMAL interrupts */
+ if (intr_status & DMA_STATUS_NIS) {
+ priv->xstats.normal_irq_n++;
+ if (likely((intr_status & DMA_STATUS_RI) ||
+ (intr_status & (DMA_STATUS_TI))))
+ _stmmac_schedule(priv);
+ }
+
+ /* Optional hardware blocks, interrupts should be disabled */
+ if (unlikely(intr_status &
+ (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+ pr_info("%s: unexpected status %08x\n", __func__, intr_status);
+
+ /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+ writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
+
+ DBG(intr, INFO, "\n\n");
+
+ return;
+}
+
+/**
+ * stmmac_open - open entry point of the driver
+ * @dev : pointer to the device structure.
+ * Description:
+ * This function is the open entry point of the driver.
+ * Return value:
+ * 0 on success and an appropriate (-)ve integer as defined in errno.h
+ * file on failure.
+ */
+static int stmmac_open(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int ret;
+
+ /* Check that the MAC address is valid. If its not, refuse
+ * to bring the device up. The user must specify an
+ * address using the following linux command:
+ * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ random_ether_addr(dev->dev_addr);
+ pr_warning("%s: generated random MAC address %pM\n", dev->name,
+ dev->dev_addr);
+ }
+
+ stmmac_verify_args();
+
+ ret = stmmac_init_phy(dev);
+ if (unlikely(ret)) {
+ pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
+ return ret;
+ }
+
+ /* Request the IRQ lines */
+ ret = request_irq(dev->irq, &stmmac_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
+ __func__, dev->irq, ret);
+ return ret;
+ }
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
+ if (unlikely(priv->tm == NULL)) {
+ pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
+ return -ENOMEM;
+ }
+ priv->tm->freq = tmrate;
+
+ /* Test if the HW timer can be actually used.
+ * In case of failure continue with no timer. */
+ if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
+ pr_warning("stmmaceth: cannot attach the HW timer\n");
+ tmrate = 0;
+ priv->tm->freq = 0;
+ priv->tm->timer_start = stmmac_no_timer_started;
+ priv->tm->timer_stop = stmmac_no_timer_stopped;
+ }
+#endif
+
+ /* Create and initialize the TX/RX descriptors chains. */
+ priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
+ priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
+ priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
+ init_dma_desc_rings(dev);
+
+ /* DMA initialization and SW reset */
+ if (unlikely(priv->mac_type->ops->dma_init(ioaddr,
+ priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) {
+
+ pr_err("%s: DMA initialization failed\n", __func__);
+ return -1;
+ }
+
+ /* Copy the MAC addr into the HW */
+ priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0);
+ /* Initialize the MAC Core */
+ priv->mac_type->ops->core_init(ioaddr);
+
+ priv->shutdown = 0;
+
+ /* Initialise the MMC (if present) to disable all interrupts. */
+ writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK);
+ writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK);
+
+ /* Enable the MAC Rx/Tx */
+ stmmac_mac_enable_rx(ioaddr);
+ stmmac_mac_enable_tx(ioaddr);
+
+ /* Set the HW DMA mode and the COE */
+ stmmac_dma_operation_mode(priv);
+
+ /* Extra statistics */
+ memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
+ priv->xstats.threshold = tc;
+
+ /* Start the ball rolling... */
+ DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
+ stmmac_dma_start_tx(ioaddr);
+ stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_start(tmrate);
+#endif
+ /* Dump DMA/MAC registers */
+ if (netif_msg_hw(priv)) {
+ priv->mac_type->ops->dump_mac_regs(ioaddr);
+ priv->mac_type->ops->dump_dma_regs(ioaddr);
+ }
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
+ napi_enable(&priv->napi);
+ skb_queue_head_init(&priv->rx_recycle);
+ netif_start_queue(dev);
+ return 0;
+}
+
+/**
+ * stmmac_release - close entry point of the driver
+ * @dev : device pointer.
+ * Description:
+ * This is the stop entry point of the driver.
+ */
+static int stmmac_release(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Stop and disconnect the PHY */
+ if (priv->phydev) {
+ phy_stop(priv->phydev);
+ phy_disconnect(priv->phydev);
+ priv->phydev = NULL;
+ }
+
+ netif_stop_queue(dev);
+
+#ifdef CONFIG_STMMAC_TIMER
+ /* Stop and release the timer */
+ stmmac_close_ext_timer();
+ if (priv->tm != NULL)
+ kfree(priv->tm);
+#endif
+ napi_disable(&priv->napi);
+ skb_queue_purge(&priv->rx_recycle);
+
+ /* Free the IRQ lines */
+ free_irq(dev->irq, dev);
+
+ /* Stop TX/RX DMA and clear the descriptors */
+ stmmac_dma_stop_tx(dev->base_addr);
+ stmmac_dma_stop_rx(dev->base_addr);
+
+ /* Release and free the Rx/Tx resources */
+ free_dma_desc_resources(priv);
+
+ /* Disable the MAC core */
+ stmmac_mac_disable_tx(dev->base_addr);
+ stmmac_mac_disable_rx(dev->base_addr);
+
+ netif_carrier_off(dev);
+
+ return 0;
+}
+
+/*
+ * To perform emulated hardware segmentation on skb.
+ */
+static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
+{
+ struct sk_buff *segs, *curr_skb;
+ int gso_segs = skb_shinfo(skb)->gso_segs;
+
+ /* Estimate the number of fragments in the worst case */
+ if (unlikely(stmmac_tx_avail(priv) < gso_segs)) {
+ netif_stop_queue(priv->dev);
+ TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n",
+ __func__);
+ if (stmmac_tx_avail(priv) < gso_segs)
+ return NETDEV_TX_BUSY;
+
+ netif_wake_queue(priv->dev);
+ }
+ TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n",
+ skb, skb->len);
+
+ segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
+ if (unlikely(IS_ERR(segs)))
+ goto sw_tso_end;
+
+ do {
+ curr_skb = segs;
+ segs = segs->next;
+ TX_DBG("\t\tcurrent skb->len: %d, *curr %p,"
+ "*next %p\n", curr_skb->len, curr_skb, segs);
+ curr_skb->next = NULL;
+ stmmac_xmit(curr_skb, priv->dev);
+ } while (segs);
+
+sw_tso_end:
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
+static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
+ struct net_device *dev,
+ int csum_insertion)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int nopaged_len = skb_headlen(skb);
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int entry = priv->cur_tx % txsize;
+ struct dma_desc *desc = priv->dma_tx + entry;
+
+ if (nopaged_len > BUF_SIZE_8KiB) {
+
+ int buf2_size = nopaged_len - BUF_SIZE_8KiB;
+
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ BUF_SIZE_8KiB, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB,
+ csum_insertion);
+
+ entry = (++priv->cur_tx) % txsize;
+ desc = priv->dma_tx + entry;
+
+ desc->des2 = dma_map_single(priv->device,
+ skb->data + BUF_SIZE_8KiB,
+ buf2_size, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 0,
+ buf2_size, csum_insertion);
+ priv->mac_type->ops->set_tx_owner(desc);
+ priv->tx_skbuff[entry] = NULL;
+ } else {
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ nopaged_len, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+ csum_insertion);
+ }
+ return entry;
+}
+
+/**
+ * stmmac_xmit:
+ * @skb : the socket buffer
+ * @dev : device pointer
+ * Description : Tx entry point of the driver.
+ */
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int entry;
+ int i, csum_insertion = 0;
+ int nfrags = skb_shinfo(skb)->nr_frags;
+ struct dma_desc *desc, *first;
+
+ if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
+ if (!netif_queue_stopped(dev)) {
+ netif_stop_queue(dev);
+ /* This is a hard error, log it. */
+ pr_err("%s: BUG! Tx Ring full when queue awake\n",
+ __func__);
+ }
+ return NETDEV_TX_BUSY;
+ }
+
+ entry = priv->cur_tx % txsize;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if ((skb->len > ETH_FRAME_LEN) || nfrags)
+ pr_info("stmmac xmit:\n"
+ "\tskb addr %p - len: %d - nopaged_len: %d\n"
+ "\tn_frags: %d - ip_summed: %d - %s gso\n",
+ skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed,
+ !skb_is_gso(skb) ? "isn't" : "is");
+#endif
+
+ if (unlikely(skb_is_gso(skb)))
+ return stmmac_sw_tso(priv, skb);
+
+ if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
+ if (likely(priv->tx_coe == NO_HW_CSUM))
+ skb_checksum_help(skb);
+ else
+ csum_insertion = 1;
+ }
+
+ desc = priv->dma_tx + entry;
+ first = desc;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN))
+ pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n"
+ "\t\tn_frags: %d, ip_summed: %d\n",
+ skb->len, skb_headlen(skb), nfrags, skb->ip_summed);
+#endif
+ priv->tx_skbuff[entry] = skb;
+ if (unlikely(skb->len >= BUF_SIZE_4KiB)) {
+ entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion);
+ desc = priv->dma_tx + entry;
+ } else {
+ unsigned int nopaged_len = skb_headlen(skb);
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ nopaged_len, DMA_TO_DEVICE);
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+ csum_insertion);
+ }
+
+ for (i = 0; i < nfrags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ int len = frag->size;
+
+ entry = (++priv->cur_tx) % txsize;
+ desc = priv->dma_tx + entry;
+
+ TX_DBG("\t[entry %d] segment len: %d\n", entry, len);
+ desc->des2 = dma_map_page(priv->device, frag->page,
+ frag->page_offset,
+ len, DMA_TO_DEVICE);
+ priv->tx_skbuff[entry] = NULL;
+ priv->mac_type->ops->prepare_tx_desc(desc, 0, len,
+ csum_insertion);
+ priv->mac_type->ops->set_tx_owner(desc);
+ }
+
+ /* Interrupt on completition only for the latest segment */
+ priv->mac_type->ops->close_tx_desc(desc);
+#ifdef CONFIG_STMMAC_TIMER
+ /* Clean IC while using timers */
+ priv->mac_type->ops->clear_tx_ic(desc);
+#endif
+ /* To avoid raise condition */
+ priv->mac_type->ops->set_tx_owner(first);
+
+ priv->cur_tx++;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if (netif_msg_pktdata(priv)) {
+ pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, "
+ "first=%p, nfrags=%d\n",
+ (priv->cur_tx % txsize), (priv->dirty_tx % txsize),
+ entry, first, nfrags);
+ display_ring(priv->dma_tx, txsize);
+ pr_info(">>> frame to be transmitted: ");
+ print_pkt(skb->data, skb->len);
+ }
+#endif
+ if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
+ TX_DBG("%s: stop transmitted packets\n", __func__);
+ netif_stop_queue(dev);
+ }
+
+ dev->stats.tx_bytes += skb->len;
+
+ /* CSR1 enables the transmit DMA to check for new descriptor */
+ writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND);
+
+ return NETDEV_TX_OK;
+}
+
+static inline void stmmac_rx_refill(struct stmmac_priv *priv)
+{
+ unsigned int rxsize = priv->dma_rx_size;
+ int bfsize = priv->dma_buf_sz;
+ struct dma_desc *p = priv->dma_rx;
+
+ for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) {
+ unsigned int entry = priv->dirty_rx % rxsize;
+ if (likely(priv->rx_skbuff[entry] == NULL)) {
+ struct sk_buff *skb;
+
+ skb = __skb_dequeue(&priv->rx_recycle);
+ if (skb == NULL)
+ skb = netdev_alloc_skb_ip_align(priv->dev,
+ bfsize);
+
+ if (unlikely(skb == NULL))
+ break;
+
+ priv->rx_skbuff[entry] = skb;
+ priv->rx_skbuff_dma[entry] =
+ dma_map_single(priv->device, skb->data, bfsize,
+ DMA_FROM_DEVICE);
+
+ (p + entry)->des2 = priv->rx_skbuff_dma[entry];
+ if (unlikely(priv->is_gmac)) {
+ if (bfsize >= BUF_SIZE_8KiB)
+ (p + entry)->des3 =
+ (p + entry)->des2 + BUF_SIZE_8KiB;
+ }
+ RX_DBG(KERN_INFO "\trefill entry #%d\n", entry);
+ }
+ priv->mac_type->ops->set_rx_owner(p + entry);
+ }
+ return;
+}
+
+static int stmmac_rx(struct stmmac_priv *priv, int limit)
+{
+ unsigned int rxsize = priv->dma_rx_size;
+ unsigned int entry = priv->cur_rx % rxsize;
+ unsigned int next_entry;
+ unsigned int count = 0;
+ struct dma_desc *p = priv->dma_rx + entry;
+ struct dma_desc *p_next;
+
+#ifdef STMMAC_RX_DEBUG
+ if (netif_msg_hw(priv)) {
+ pr_debug(">>> stmmac_rx: descriptor ring:\n");
+ display_ring(priv->dma_rx, rxsize);
+ }
+#endif
+ count = 0;
+ while (!priv->mac_type->ops->get_rx_owner(p)) {
+ int status;
+
+ if (count >= limit)
+ break;
+
+ count++;
+
+ next_entry = (++priv->cur_rx) % rxsize;
+ p_next = priv->dma_rx + next_entry;
+ prefetch(p_next);
+
+ /* read the status of the incoming frame */
+ status = (priv->mac_type->ops->rx_status(&priv->dev->stats,
+ &priv->xstats, p));
+ if (unlikely(status == discard_frame))
+ priv->dev->stats.rx_errors++;
+ else {
+ struct sk_buff *skb;
+ /* Length should omit the CRC */
+ int frame_len =
+ priv->mac_type->ops->get_rx_frame_len(p) - 4;
+
+#ifdef STMMAC_RX_DEBUG
+ if (frame_len > ETH_FRAME_LEN)
+ pr_debug("\tRX frame size %d, COE status: %d\n",
+ frame_len, status);
+
+ if (netif_msg_hw(priv))
+ pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
+ p, entry, p->des2);
+#endif
+ skb = priv->rx_skbuff[entry];
+ if (unlikely(!skb)) {
+ pr_err("%s: Inconsistent Rx descriptor chain\n",
+ priv->dev->name);
+ priv->dev->stats.rx_dropped++;
+ break;
+ }
+ prefetch(skb->data - NET_IP_ALIGN);
+ priv->rx_skbuff[entry] = NULL;
+
+ skb_put(skb, frame_len);
+ dma_unmap_single(priv->device,
+ priv->rx_skbuff_dma[entry],
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+#ifdef STMMAC_RX_DEBUG
+ if (netif_msg_pktdata(priv)) {
+ pr_info(" frame received (%dbytes)", frame_len);
+ print_pkt(skb->data, frame_len);
+ }
+#endif
+ skb->protocol = eth_type_trans(skb, priv->dev);
+
+ if (unlikely(status == csum_none)) {
+ /* always for the old mac 10/100 */
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_receive_skb(skb);
+ } else {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ napi_gro_receive(&priv->napi, skb);
+ }
+
+ priv->dev->stats.rx_packets++;
+ priv->dev->stats.rx_bytes += frame_len;
+ priv->dev->last_rx = jiffies;
+ }
+ entry = next_entry;
+ p = p_next; /* use prefetched values */
+ }
+
+ stmmac_rx_refill(priv);
+
+ priv->xstats.rx_pkt_n += count;
+
+ return count;
+}
+
+/**
+ * stmmac_poll - stmmac poll method (NAPI)
+ * @napi : pointer to the napi structure.
+ * @budget : maximum number of packets that the current CPU can receive from
+ * all interfaces.
+ * Description :
+ * This function implements the the reception process.
+ * Also it runs the TX completion thread
+ */
+static int stmmac_poll(struct napi_struct *napi, int budget)
+{
+ struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi);
+ int work_done = 0;
+
+ priv->xstats.poll_n++;
+ stmmac_tx(priv);
+ work_done = stmmac_rx(priv, budget);
+
+ if (work_done < budget) {
+ napi_complete(napi);
+ stmmac_enable_irq(priv);
+ }
+ return work_done;
+}
+
+/**
+ * stmmac_tx_timeout
+ * @dev : Pointer to net device structure
+ * Description: this function is called when a packet transmission fails to
+ * complete within a reasonable tmrate. The driver will mark the error in the
+ * netdev structure and arrange for the device to be reset to a sane state
+ * in order to transmit a new packet.
+ */
+static void stmmac_tx_timeout(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Clear Tx resources and restart transmitting again */
+ stmmac_tx_err(priv);
+ return;
+}
+
+/* Configuration changes (passed on by ifconfig) */
+static int stmmac_config(struct net_device *dev, struct ifmap *map)
+{
+ if (dev->flags & IFF_UP) /* can't act on a running interface */
+ return -EBUSY;
+
+ /* Don't allow changing the I/O address */
+ if (map->base_addr != dev->base_addr) {
+ pr_warning("%s: can't change I/O address\n", dev->name);
+ return -EOPNOTSUPP;
+ }
+
+ /* Don't allow changing the IRQ */
+ if (map->irq != dev->irq) {
+ pr_warning("%s: can't change IRQ number %d\n",
+ dev->name, dev->irq);
+ return -EOPNOTSUPP;
+ }
+
+ /* ignore other fields */
+ return 0;
+}
+
+/**
+ * stmmac_multicast_list - entry point for multicast addressing
+ * @dev : pointer to the device structure
+ * Description:
+ * This function is a driver entry point which gets called by the kernel
+ * whenever multicast addresses must be enabled/disabled.
+ * Return value:
+ * void.
+ */
+static void stmmac_multicast_list(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+ priv->mac_type->ops->set_filter(dev);
+ spin_unlock(&priv->lock);
+ return;
+}
+
+/**
+ * stmmac_change_mtu - entry point to change MTU size for the device.
+ * @dev : device pointer.
+ * @new_mtu : the new MTU size for the device.
+ * Description: the Maximum Transfer Unit (MTU) is used by the network layer
+ * to drive packet transmission. Ethernet has an MTU of 1500 octets
+ * (ETH_DATA_LEN). This value can be changed with ifconfig.
+ * Return value:
+ * 0 on success and an appropriate (-)ve integer as defined in errno.h
+ * file on failure.
+ */
+static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int max_mtu;
+
+ if (netif_running(dev)) {
+ pr_err("%s: must be stopped to change its MTU\n", dev->name);
+ return -EBUSY;
+ }
+
+ if (priv->is_gmac)
+ max_mtu = JUMBO_LEN;
+ else
+ max_mtu = ETH_DATA_LEN;
+
+ if ((new_mtu < 46) || (new_mtu > max_mtu)) {
+ pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
+ return -EINVAL;
+ }
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (unlikely(!dev)) {
+ pr_err("%s: invalid dev pointer\n", __func__);
+ return IRQ_NONE;
+ }
+
+ if (priv->is_gmac) {
+ unsigned long ioaddr = dev->base_addr;
+ /* To handle GMAC own interrupts */
+ priv->mac_type->ops->host_irq_status(ioaddr);
+ }
+ stmmac_dma_interrupt(dev);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling receive - used by NETCONSOLE and other diagnostic tools
+ * to allow network I/O with interrupts disabled. */
+static void stmmac_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ stmmac_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+/**
+ * stmmac_ioctl - Entry point for the Ioctl
+ * @dev: Device pointer.
+ * @rq: An IOCTL specefic structure, that can contain a pointer to
+ * a proprietary structure used to pass information to the driver.
+ * @cmd: IOCTL command
+ * Description:
+ * Currently there are no special functionality supported in IOCTL, just the
+ * phy_mii_ioctl(...) can be invoked.
+ */
+static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (!priv->phydev)
+ return -EINVAL;
+
+ spin_lock(&priv->lock);
+ ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+ spin_unlock(&priv->lock);
+ default:
+ break;
+ }
+ return ret;
+}
+
+#ifdef STMMAC_VLAN_TAG_USED
+static void stmmac_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp);
+
+ spin_lock(&priv->lock);
+ priv->vlgrp = grp;
+ spin_unlock(&priv->lock);
+
+ return;
+}
+#endif
+
+static const struct net_device_ops stmmac_netdev_ops = {
+ .ndo_open = stmmac_open,
+ .ndo_start_xmit = stmmac_xmit,
+ .ndo_stop = stmmac_release,
+ .ndo_change_mtu = stmmac_change_mtu,
+ .ndo_set_multicast_list = stmmac_multicast_list,
+ .ndo_tx_timeout = stmmac_tx_timeout,
+ .ndo_do_ioctl = stmmac_ioctl,
+ .ndo_set_config = stmmac_config,
+#ifdef STMMAC_VLAN_TAG_USED
+ .ndo_vlan_rx_register = stmmac_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = stmmac_poll_controller,
+#endif
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+/**
+ * stmmac_probe - Initialization of the adapter .
+ * @dev : device pointer
+ * Description: The function initializes the network device structure for
+ * the STMMAC driver. It also calls the low level routines
+ * in order to init the HW (i.e. the DMA engine)
+ */
+static int stmmac_probe(struct net_device *dev)
+{
+ int ret = 0;
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ ether_setup(dev);
+
+ dev->netdev_ops = &stmmac_netdev_ops;
+ stmmac_set_ethtool_ops(dev);
+
+ dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA);
+ dev->watchdog_timeo = msecs_to_jiffies(watchdog);
+#ifdef STMMAC_VLAN_TAG_USED
+ /* Both mac100 and gmac support receive VLAN tag detection */
+ dev->features |= NETIF_F_HW_VLAN_RX;
+#endif
+ priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+ if (priv->is_gmac)
+ priv->rx_csum = 1;
+
+ if (flow_ctrl)
+ priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
+
+ priv->pause = pause;
+ netif_napi_add(dev, &priv->napi, stmmac_poll, 64);
+
+ /* Get the MAC address */
+ priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0);
+
+ if (!is_valid_ether_addr(dev->dev_addr))
+ pr_warning("\tno valid MAC address;"
+ "please, use ifconfig or nwhwconfig!\n");
+
+ ret = register_netdev(dev);
+ if (ret) {
+ pr_err("%s: ERROR %i registering the device\n",
+ __func__, ret);
+ return -ENODEV;
+ }
+
+ DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
+ dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
+ (dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
+
+ spin_lock_init(&priv->lock);
+
+ return ret;
+}
+
+/**
+ * stmmac_mac_device_setup
+ * @dev : device pointer
+ * Description: select and initialise the mac device (mac100 or Gmac).
+ */
+static int stmmac_mac_device_setup(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ struct mac_device_info *device;
+
+ if (priv->is_gmac)
+ device = gmac_setup(ioaddr);
+ else
+ device = mac100_setup(ioaddr);
+
+ if (!device)
+ return -ENOMEM;
+
+ priv->mac_type = device;
+
+ priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->wolopts = WAKE_MAGIC; /* Magic Frame */
+
+ return 0;
+}
+
+static int stmmacphy_dvr_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacphy_data *plat_dat;
+ plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data);
+
+ pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n",
+ plat_dat->bus_id);
+
+ return 0;
+}
+
+static int stmmacphy_dvr_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver stmmacphy_driver = {
+ .driver = {
+ .name = PHY_RESOURCE_NAME,
+ },
+ .probe = stmmacphy_dvr_probe,
+ .remove = stmmacphy_dvr_remove,
+};
+
+/**
+ * stmmac_associate_phy
+ * @dev: pointer to device structure
+ * @data: points to the private structure.
+ * Description: Scans through all the PHYs we have registered and checks if
+ * any are associated with our MAC. If so, then just fill in
+ * the blanks in our local context structure
+ */
+static int stmmac_associate_phy(struct device *dev, void *data)
+{
+ struct stmmac_priv *priv = (struct stmmac_priv *)data;
+ struct plat_stmmacphy_data *plat_dat;
+
+ plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data);
+
+ DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__,
+ plat_dat->bus_id);
+
+ /* Check that this phy is for the MAC being initialised */
+ if (priv->bus_id != plat_dat->bus_id)
+ return 0;
+
+ /* OK, this PHY is connected to the MAC.
+ Go ahead and get the parameters */
+ DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__);
+ priv->phy_irq =
+ platform_get_irq_byname(to_platform_device(dev), "phyirq");
+ DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__,
+ plat_dat->bus_id, priv->phy_irq);
+
+ /* Override with kernel parameters if supplied XXX CRS XXX
+ * this needs to have multiple instances */
+ if ((phyaddr >= 0) && (phyaddr <= 31))
+ plat_dat->phy_addr = phyaddr;
+
+ priv->phy_addr = plat_dat->phy_addr;
+ priv->phy_mask = plat_dat->phy_mask;
+ priv->phy_interface = plat_dat->interface;
+ priv->phy_reset = plat_dat->phy_reset;
+
+ DBG(probe, DEBUG, "%s: exiting\n", __func__);
+ return 1; /* forces exit of driver_for_each_device() */
+}
+
+/**
+ * stmmac_dvr_probe
+ * @pdev: platform device pointer
+ * Description: the driver is initialized through platform_device.
+ */
+static int stmmac_dvr_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res;
+ unsigned int *addr = NULL;
+ struct net_device *ndev = NULL;
+ struct stmmac_priv *priv;
+ struct plat_stmmacenet_data *plat_dat;
+
+ pr_info("STMMAC driver:\n\tplatform registration... ");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto out;
+ }
+ pr_info("done!\n");
+
+ if (!request_mem_region(res->start, (res->end - res->start),
+ pdev->name)) {
+ pr_err("%s: ERROR: memory allocation failed"
+ "cannot get the I/O addr 0x%x\n",
+ __func__, (unsigned int)res->start);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ addr = ioremap(res->start, (res->end - res->start));
+ if (!addr) {
+ pr_err("%s: ERROR: memory mapping failed \n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ndev = alloc_etherdev(sizeof(struct stmmac_priv));
+ if (!ndev) {
+ pr_err("%s: ERROR: allocating the device\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ /* Get the MAC information */
+ ndev->irq = platform_get_irq_byname(pdev, "macirq");
+ if (ndev->irq == -ENXIO) {
+ pr_err("%s: ERROR: MAC IRQ configuration "
+ "information not found\n", __func__);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv = netdev_priv(ndev);
+ priv->device = &(pdev->dev);
+ priv->dev = ndev;
+ plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data);
+ priv->bus_id = plat_dat->bus_id;
+ priv->pbl = plat_dat->pbl; /* TLI */
+ priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */
+
+ platform_set_drvdata(pdev, ndev);
+
+ /* Set the I/O base addr */
+ ndev->base_addr = (unsigned long)addr;
+
+ /* MAC HW revice detection */
+ ret = stmmac_mac_device_setup(ndev);
+ if (ret < 0)
+ goto out;
+
+ /* Network Device Registration */
+ ret = stmmac_probe(ndev);
+ if (ret < 0)
+ goto out;
+
+ /* associate a PHY - it is provided by another platform bus */
+ if (!driver_for_each_device
+ (&(stmmacphy_driver.driver), NULL, (void *)priv,
+ stmmac_associate_phy)) {
+ pr_err("No PHY device is associated with this MAC!\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv->fix_mac_speed = plat_dat->fix_mac_speed;
+ priv->bsp_priv = plat_dat->bsp_priv;
+
+ pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
+ "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name,
+ pdev->id, ndev->irq, (unsigned int)addr);
+
+ /* MDIO bus Registration */
+ pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
+ ret = stmmac_mdio_register(ndev);
+ if (ret < 0)
+ goto out;
+ pr_debug("registered!\n");
+
+out:
+ if (ret < 0) {
+ platform_set_drvdata(pdev, NULL);
+ release_mem_region(res->start, (res->end - res->start));
+ if (addr != NULL)
+ iounmap(addr);
+ }
+
+ return ret;
+}
+
+/**
+ * stmmac_dvr_remove
+ * @pdev: platform device pointer
+ * Description: this function resets the TX/RX processes, disables the MAC RX/TX
+ * changes the link status, releases the DMA descriptor rings,
+ * unregisters the MDIO bus and unmaps the allocated memory.
+ */
+static int stmmac_dvr_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ pr_info("%s:\n\tremoving driver", __func__);
+
+ stmmac_dma_stop_rx(ndev->base_addr);
+ stmmac_dma_stop_tx(ndev->base_addr);
+
+ stmmac_mac_disable_rx(ndev->base_addr);
+ stmmac_mac_disable_tx(ndev->base_addr);
+
+ netif_carrier_off(ndev);
+
+ stmmac_mdio_unregister(ndev);
+
+ platform_set_drvdata(pdev, NULL);
+ unregister_netdev(ndev);
+
+ iounmap((void *)ndev->base_addr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, (res->end - res->start));
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int dis_ic = 0;
+
+ if (!dev || !netif_running(dev))
+ return 0;
+
+ spin_lock(&priv->lock);
+
+ if (state.event == PM_EVENT_SUSPEND) {
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+ if (priv->phydev)
+ phy_stop(priv->phydev);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_stop();
+ dis_ic = 1;
+#endif
+ napi_disable(&priv->napi);
+
+ /* Stop TX/RX DMA */
+ stmmac_dma_stop_tx(dev->base_addr);
+ stmmac_dma_stop_rx(dev->base_addr);
+ /* Clear the Rx/Tx descriptors */
+ priv->mac_type->ops->init_rx_desc(priv->dma_rx,
+ priv->dma_rx_size, dis_ic);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx,
+ priv->dma_tx_size);
+
+ stmmac_mac_disable_tx(dev->base_addr);
+
+ if (device_may_wakeup(&(pdev->dev))) {
+ /* Enable Power down mode by programming the PMT regs */
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->mac_type->ops->pmt(dev->base_addr,
+ priv->wolopts);
+ } else {
+ stmmac_mac_disable_rx(dev->base_addr);
+ }
+ } else {
+ priv->shutdown = 1;
+ /* Although this can appear slightly redundant it actually
+ * makes fast the standby operation and guarantees the driver
+ * working if hibernation is on media. */
+ stmmac_release(dev);
+ }
+
+ spin_unlock(&priv->lock);
+ return 0;
+}
+
+static int stmmac_resume(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ if (!netif_running(dev))
+ return 0;
+
+ spin_lock(&priv->lock);
+
+ if (priv->shutdown) {
+ /* Re-open the interface and re-init the MAC/DMA
+ and the rings. */
+ stmmac_open(dev);
+ goto out_resume;
+ }
+
+ /* Power Down bit, into the PM register, is cleared
+ * automatically as soon as a magic packet or a Wake-up frame
+ * is received. Anyway, it's better to manually clear
+ * this bit because it can generate problems while resuming
+ * from another devices (e.g. serial console). */
+ if (device_may_wakeup(&(pdev->dev)))
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->mac_type->ops->pmt(dev->base_addr, 0);
+
+ netif_device_attach(dev);
+
+ /* Enable the MAC and DMA */
+ stmmac_mac_enable_rx(ioaddr);
+ stmmac_mac_enable_tx(ioaddr);
+ stmmac_dma_start_tx(ioaddr);
+ stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_start(tmrate);
+#endif
+ napi_enable(&priv->napi);
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
+ netif_start_queue(dev);
+
+out_resume:
+ spin_unlock(&priv->lock);
+ return 0;
+}
+#endif
+
+static struct platform_driver stmmac_driver = {
+ .driver = {
+ .name = STMMAC_RESOURCE_NAME,
+ },
+ .probe = stmmac_dvr_probe,
+ .remove = stmmac_dvr_remove,
+#ifdef CONFIG_PM
+ .suspend = stmmac_suspend,
+ .resume = stmmac_resume,
+#endif
+
+};
+
+/**
+ * stmmac_init_module - Entry point for the driver
+ * Description: This function is the entry point for the driver.
+ */
+static int __init stmmac_init_module(void)
+{
+ int ret;
+
+ if (platform_driver_register(&stmmacphy_driver)) {
+ pr_err("No PHY devices registered!\n");
+ return -ENODEV;
+ }
+
+ ret = platform_driver_register(&stmmac_driver);
+ return ret;
+}
+
+/**
+ * stmmac_cleanup_module - Cleanup routine for the driver
+ * Description: This function is the cleanup routine for the driver.
+ */
+static void __exit stmmac_cleanup_module(void)
+{
+ platform_driver_unregister(&stmmacphy_driver);
+ platform_driver_unregister(&stmmac_driver);
+}
+
+#ifndef MODULE
+static int __init stmmac_cmdline_opt(char *str)
+{
+ char *opt;
+
+ if (!str || !*str)
+ return -EINVAL;
+ while ((opt = strsep(&str, ",")) != NULL) {
+ if (!strncmp(opt, "debug:", 6))
+ strict_strtoul(opt + 6, 0, (unsigned long *)&debug);
+ else if (!strncmp(opt, "phyaddr:", 8))
+ strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr);
+ else if (!strncmp(opt, "dma_txsize:", 11))
+ strict_strtoul(opt + 11, 0,
+ (unsigned long *)&dma_txsize);
+ else if (!strncmp(opt, "dma_rxsize:", 11))
+ strict_strtoul(opt + 11, 0,
+ (unsigned long *)&dma_rxsize);
+ else if (!strncmp(opt, "buf_sz:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz);
+ else if (!strncmp(opt, "tc:", 3))
+ strict_strtoul(opt + 3, 0, (unsigned long *)&tc);
+ else if (!strncmp(opt, "tx_coe:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe);
+ else if (!strncmp(opt, "watchdog:", 9))
+ strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog);
+ else if (!strncmp(opt, "flow_ctrl:", 10))
+ strict_strtoul(opt + 10, 0,
+ (unsigned long *)&flow_ctrl);
+ else if (!strncmp(opt, "pause:", 6))
+ strict_strtoul(opt + 6, 0, (unsigned long *)&pause);
+#ifdef CONFIG_STMMAC_TIMER
+ else if (!strncmp(opt, "tmrate:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate);
+#endif
+ }
+ return 0;
+}
+
+__setup("stmmaceth=", stmmac_cmdline_opt);
+#endif
+
+module_init(stmmac_init_module);
+module_exit(stmmac_cleanup_module);
+
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_LICENSE("GPL");