summaryrefslogtreecommitdiff
path: root/drivers/net/usb/r8152.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/usb/r8152.c')
-rw-r--r--drivers/net/usb/r8152.c916
1 files changed, 778 insertions, 138 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 51073721e224..e8fac732c6f1 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2013 Realtek Semiconductor Corp. All rights reserved.
+ * Copyright (c) 2014 Realtek Semiconductor Corp. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -7,7 +7,6 @@
*
*/
-#include <linux/init.h>
#include <linux/signal.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -24,9 +23,9 @@
#include <linux/ipv6.h>
/* Version Information */
-#define DRIVER_VERSION "v1.02.0 (2013/10/28)"
+#define DRIVER_VERSION "v1.04.0 (2014/01/15)"
#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
-#define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
+#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
#define MODULENAME "r8152"
#define R8152_PHY_ID 32
@@ -39,15 +38,24 @@
#define PLA_RXFIFO_CTRL2 0xc0a8
#define PLA_FMC 0xc0b4
#define PLA_CFG_WOL 0xc0b6
+#define PLA_TEREDO_CFG 0xc0bc
#define PLA_MAR 0xcd00
+#define PLA_BACKUP 0xd000
#define PAL_BDC_CR 0xd1a0
+#define PLA_TEREDO_TIMER 0xd2cc
+#define PLA_REALWOW_TIMER 0xd2e8
#define PLA_LEDSEL 0xdd90
#define PLA_LED_FEATURE 0xdd92
#define PLA_PHYAR 0xde00
+#define PLA_BOOT_CTRL 0xe004
#define PLA_GPHY_INTR_IMR 0xe022
#define PLA_EEE_CR 0xe040
#define PLA_EEEP_CR 0xe080
#define PLA_MAC_PWR_CTRL 0xe0c0
+#define PLA_MAC_PWR_CTRL2 0xe0ca
+#define PLA_MAC_PWR_CTRL3 0xe0cc
+#define PLA_MAC_PWR_CTRL4 0xe0ce
+#define PLA_WDT6_CTRL 0xe428
#define PLA_TCR0 0xe610
#define PLA_TCR1 0xe612
#define PLA_TXFIFO_CTRL 0xe618
@@ -73,16 +81,25 @@
#define PLA_BP_5 0xfc32
#define PLA_BP_6 0xfc34
#define PLA_BP_7 0xfc36
+#define PLA_BP_EN 0xfc38
+#define USB_U2P3_CTRL 0xb460
#define USB_DEV_STAT 0xb808
#define USB_USB_CTRL 0xd406
#define USB_PHY_CTRL 0xd408
#define USB_TX_AGG 0xd40a
#define USB_RX_BUF_TH 0xd40c
#define USB_USB_TIMER 0xd428
+#define USB_RX_EARLY_AGG 0xd42c
#define USB_PM_CTRL_STATUS 0xd432
#define USB_TX_DMA 0xd434
+#define USB_TOLERANCE 0xd490
+#define USB_LPM_CTRL 0xd41a
#define USB_UPS_CTRL 0xd800
+#define USB_MISC_0 0xd81a
+#define USB_POWER_CUT 0xd80a
+#define USB_AFE_CTRL2 0xd824
+#define USB_WDT11_CTRL 0xe43c
#define USB_BP_BA 0xfc26
#define USB_BP_0 0xfc28
#define USB_BP_1 0xfc2a
@@ -92,14 +109,30 @@
#define USB_BP_5 0xfc32
#define USB_BP_6 0xfc34
#define USB_BP_7 0xfc36
+#define USB_BP_EN 0xfc38
/* OCP Registers */
#define OCP_ALDPS_CONFIG 0x2010
#define OCP_EEE_CONFIG1 0x2080
#define OCP_EEE_CONFIG2 0x2092
#define OCP_EEE_CONFIG3 0x2094
+#define OCP_BASE_MII 0xa400
#define OCP_EEE_AR 0xa41a
#define OCP_EEE_DATA 0xa41c
+#define OCP_PHY_STATUS 0xa420
+#define OCP_POWER_CFG 0xa430
+#define OCP_EEE_CFG 0xa432
+#define OCP_SRAM_ADDR 0xa436
+#define OCP_SRAM_DATA 0xa438
+#define OCP_DOWN_SPEED 0xa442
+#define OCP_EEE_CFG2 0xa5d0
+#define OCP_ADC_CFG 0xbc06
+
+/* SRAM Register */
+#define SRAM_LPF_CFG 0x8012
+#define SRAM_10M_AMP1 0x8080
+#define SRAM_10M_AMP2 0x8082
+#define SRAM_IMPEDANCE 0x8084
/* PLA_RCR */
#define RCR_AAP 0x00000001
@@ -116,14 +149,17 @@
#define RXFIFO_THR2_FULL 0x00000060
#define RXFIFO_THR2_HIGH 0x00000038
#define RXFIFO_THR2_OOB 0x0000004a
+#define RXFIFO_THR2_NORMAL 0x00a0
/* PLA_RXFIFO_CTRL2 */
#define RXFIFO_THR3_FULL 0x00000078
#define RXFIFO_THR3_HIGH 0x00000048
#define RXFIFO_THR3_OOB 0x0000005a
+#define RXFIFO_THR3_NORMAL 0x0110
/* PLA_TXFIFO_CTRL */
#define TXFIFO_THR_NORMAL 0x00400008
+#define TXFIFO_THR_NORMAL2 0x01000008
/* PLA_FMC */
#define FMC_FCR_MCU_EN 0x0001
@@ -131,6 +167,9 @@
/* PLA_EEEP_CR */
#define EEEP_CR_EEEP_TX 0x0002
+/* PLA_WDT6_CTRL */
+#define WDT6_SET_MODE 0x0010
+
/* PLA_TCR0 */
#define TCR0_TX_EMPTY 0x0800
#define TCR0_AUTO_FIFO 0x0080
@@ -168,6 +207,12 @@
/* PLA_CFG_WOL */
#define MAGIC_EN 0x0001
+/* PLA_TEREDO_CFG */
+#define TEREDO_SEL 0x8000
+#define TEREDO_WAKE_MASK 0x7f00
+#define TEREDO_RS_EVENT_MASK 0x00fe
+#define OOB_TEREDO_EN 0x0001
+
/* PAL_BDC_CR */
#define ALDPS_PROXY_MODE 0x0001
@@ -185,6 +230,25 @@
#define D3_CLK_GATED_EN 0x00004000
#define MCU_CLK_RATIO 0x07010f07
#define MCU_CLK_RATIO_MASK 0x0f0f0f0f
+#define ALDPS_SPDWN_RATIO 0x0f87
+
+/* PLA_MAC_PWR_CTRL2 */
+#define EEE_SPDWN_RATIO 0x8007
+
+/* PLA_MAC_PWR_CTRL3 */
+#define PKT_AVAIL_SPDWN_EN 0x0100
+#define SUSPEND_SPDWN_EN 0x0004
+#define U1U2_SPDWN_EN 0x0002
+#define L1_SPDWN_EN 0x0001
+
+/* PLA_MAC_PWR_CTRL4 */
+#define PWRSAVE_SPDWN_EN 0x1000
+#define RXDV_SPDWN_EN 0x0800
+#define TX10MIDLE_EN 0x0100
+#define TP100_SPDWN_EN 0x0020
+#define TP500_SPDWN_EN 0x0010
+#define TP1000_SPDWN_EN 0x0008
+#define EEE_SPDWN_EN 0x0001
/* PLA_GPHY_INTR_IMR */
#define GPHY_STS_MSK 0x0001
@@ -199,6 +263,9 @@
#define EEE_RX_EN 0x0001
#define EEE_TX_EN 0x0002
+/* PLA_BOOT_CTRL */
+#define AUTOLOAD_DONE 0x0002
+
/* USB_DEV_STAT */
#define STAT_SPEED_MASK 0x0006
#define STAT_SPEED_HIGH 0x0000
@@ -208,7 +275,9 @@
#define TX_AGG_MAX_THRESHOLD 0x03
/* USB_RX_BUF_TH */
-#define RX_BUF_THR 0x7a120180
+#define RX_THR_SUPPER 0x0c350180
+#define RX_THR_HIGH 0x7a120180
+#define RX_THR_SLOW 0xffff0180
/* USB_TX_DMA */
#define TEST_MODE_DISABLE 0x00000001
@@ -218,17 +287,55 @@
#define POWER_CUT 0x0100
/* USB_PM_CTRL_STATUS */
-#define RWSUME_INDICATE 0x0001
+#define RESUME_INDICATE 0x0001
/* USB_USB_CTRL */
#define RX_AGG_DISABLE 0x0010
+/* USB_U2P3_CTRL */
+#define U2P3_ENABLE 0x0001
+
+/* USB_POWER_CUT */
+#define PWR_EN 0x0001
+#define PHASE2_EN 0x0008
+
+/* USB_MISC_0 */
+#define PCUT_STATUS 0x0001
+
+/* USB_RX_EARLY_AGG */
+#define EARLY_AGG_SUPPER 0x0e832981
+#define EARLY_AGG_HIGH 0x0e837a12
+#define EARLY_AGG_SLOW 0x0e83ffff
+
+/* USB_WDT11_CTRL */
+#define TIMER11_EN 0x0001
+
+/* USB_LPM_CTRL */
+#define LPM_TIMER_MASK 0x0c
+#define LPM_TIMER_500MS 0x04 /* 500 ms */
+#define LPM_TIMER_500US 0x0c /* 500 us */
+
+/* USB_AFE_CTRL2 */
+#define SEN_VAL_MASK 0xf800
+#define SEN_VAL_NORMAL 0xa000
+#define SEL_RXIDLE 0x0100
+
/* OCP_ALDPS_CONFIG */
#define ENPWRSAVE 0x8000
#define ENPDNPS 0x0200
#define LINKENA 0x0100
#define DIS_SDSAVE 0x0010
+/* OCP_PHY_STATUS */
+#define PHY_STAT_MASK 0x0007
+#define PHY_STAT_LAN_ON 3
+#define PHY_STAT_PWRDN 5
+
+/* OCP_POWER_CFG */
+#define EEE_CLKDIV_EN 0x8000
+#define EN_ALDPS 0x0004
+#define EN_10M_PLLOFF 0x0001
+
/* OCP_EEE_CONFIG1 */
#define RG_TXLPI_MSK_HFDUP 0x8000
#define RG_MATCLR_EN 0x4000
@@ -263,7 +370,36 @@
#define EEE_ADDR 0x003C
#define EEE_DATA 0x0002
+/* OCP_EEE_CFG */
+#define CTAP_SHORT_EN 0x0040
+#define EEE10_EN 0x0010
+
+/* OCP_DOWN_SPEED */
+#define EN_10M_BGOFF 0x0080
+
+/* OCP_EEE_CFG2 */
+#define MY1000_EEE 0x0004
+#define MY100_EEE 0x0002
+
+/* OCP_ADC_CFG */
+#define CKADSEL_L 0x0100
+#define ADC_EN 0x0080
+#define EN_EMI_L 0x0040
+
+/* SRAM_LPF_CFG */
+#define LPF_AUTO_TUNE 0x8000
+
+/* SRAM_10M_AMP1 */
+#define GDAC_IB_UPALL 0x0008
+
+/* SRAM_10M_AMP2 */
+#define AMP_DN 0x0200
+
+/* SRAM_IMPEDANCE */
+#define RX_DRIVING_MASK 0x6000
+
enum rtl_register_content {
+ _1000bps = 0x10,
_100bps = 0x08,
_10bps = 0x04,
LINK_STATUS = 0x02,
@@ -273,6 +409,9 @@ enum rtl_register_content {
#define RTL8152_MAX_TX 10
#define RTL8152_MAX_RX 10
#define INTBUFSIZE 2
+#define CRC_SIZE 4
+#define TX_ALIGN 4
+#define RX_ALIGN 8
#define INTR_LINK 0x0004
@@ -302,10 +441,17 @@ enum rtl8152_flags {
/* Define these values to match your device */
#define VENDOR_ID_REALTEK 0x0bda
#define PRODUCT_ID_RTL8152 0x8152
+#define PRODUCT_ID_RTL8153 0x8153
+
+#define VENDOR_ID_SAMSUNG 0x04e8
+#define PRODUCT_ID_SAMSUNG 0xa101
#define MCU_TYPE_PLA 0x0100
#define MCU_TYPE_USB 0x0000
+#define REALTEK_USB_DEVICE(vend, prod) \
+ USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC)
+
struct rx_desc {
__le32 opts1;
#define RX_LEN_MASK 0x7fff
@@ -363,6 +509,15 @@ struct r8152 {
spinlock_t rx_lock, tx_lock;
struct delayed_work schedule;
struct mii_if_info mii;
+
+ struct rtl_ops {
+ void (*init)(struct r8152 *);
+ int (*enable)(struct r8152 *);
+ void (*disable)(struct r8152 *);
+ void (*down)(struct r8152 *);
+ void (*unload)(struct r8152 *);
+ } rtl_ops;
+
int intr_interval;
u32 msg_enable;
u32 tx_qlen;
@@ -375,7 +530,11 @@ struct r8152 {
enum rtl_version {
RTL_VER_UNKNOWN = 0,
RTL_VER_01,
- RTL_VER_02
+ RTL_VER_02,
+ RTL_VER_03,
+ RTL_VER_04,
+ RTL_VER_05,
+ RTL_VER_MAX
};
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
@@ -427,8 +586,8 @@ int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
void *data, u16 type)
{
- u16 limit = 64;
- int ret = 0;
+ u16 limit = 64;
+ int ret = 0;
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return -ENODEV;
@@ -467,9 +626,9 @@ static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
u16 size, void *data, u16 type)
{
- int ret;
- u16 byteen_start, byteen_end, byen;
- u16 limit = 512;
+ int ret;
+ u16 byteen_start, byteen_end, byen;
+ u16 limit = 512;
if (test_bit(RTL8152_UNPLUG, &tp->flags))
return -ENODEV;
@@ -653,45 +812,54 @@ static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
}
-static void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
+static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
{
- u32 ocp_data;
- int i;
+ u16 ocp_base, ocp_index;
- ocp_data = PHYAR_FLAG | ((reg_addr & 0x1f) << 16) |
- (value & 0xffff);
+ ocp_base = addr & 0xf000;
+ if (ocp_base != tp->ocp_base) {
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+ tp->ocp_base = ocp_base;
+ }
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data);
+ ocp_index = (addr & 0x0fff) | 0xb000;
+ return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
+}
- for (i = 20; i > 0; i--) {
- udelay(25);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR);
- if (!(ocp_data & PHYAR_FLAG))
- break;
+static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
+{
+ u16 ocp_base, ocp_index;
+
+ ocp_base = addr & 0xf000;
+ if (ocp_base != tp->ocp_base) {
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+ tp->ocp_base = ocp_base;
}
- udelay(20);
+
+ ocp_index = (addr & 0x0fff) | 0xb000;
+ ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
}
-static int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
+static inline void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
{
- u32 ocp_data;
- int i;
-
- ocp_data = (reg_addr & 0x1f) << 16;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_PHYAR, ocp_data);
+ ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value);
+}
- for (i = 20; i > 0; i--) {
- udelay(25);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_PHYAR);
- if (ocp_data & PHYAR_FLAG)
- break;
- }
- udelay(20);
+static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
+{
+ return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2);
+}
- if (!(ocp_data & PHYAR_FLAG))
- return -EAGAIN;
+static void sram_write(struct r8152 *tp, u16 addr, u16 data)
+{
+ ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
+ ocp_reg_write(tp, OCP_SRAM_DATA, data);
+}
- return (u16)(ocp_data & 0xffff);
+static u16 sram_read(struct r8152 *tp, u16 addr)
+{
+ ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
+ return ocp_reg_read(tp, OCP_SRAM_DATA);
}
static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
@@ -715,20 +883,6 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
r8152_mdio_write(tp, reg, val);
}
-static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
-{
- u16 ocp_base, ocp_index;
-
- ocp_base = addr & 0xf000;
- if (ocp_base != tp->ocp_base) {
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
- tp->ocp_base = ocp_base;
- }
-
- ocp_index = (addr & 0x0fff) | 0xb000;
- ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
-}
-
static
int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
@@ -814,10 +968,12 @@ static void read_bulk_callback(struct urb *urb)
case -ENOENT:
return; /* the urb is in unlink state */
case -ETIME:
- pr_warn_ratelimited("may be reset is needed?..\n");
+ if (net_ratelimit())
+ netdev_warn(netdev, "maybe reset is needed?\n");
break;
default:
- pr_warn_ratelimited("Rx status %d\n", status);
+ if (net_ratelimit())
+ netdev_warn(netdev, "Rx status %d\n", status);
break;
}
@@ -850,7 +1006,8 @@ static void write_bulk_callback(struct urb *urb)
stats = rtl8152_get_stats(tp->netdev);
if (status) {
- pr_warn_ratelimited("Tx status %d\n", status);
+ if (net_ratelimit())
+ netdev_warn(tp->netdev, "Tx status %d\n", status);
stats->tx_errors += agg->skb_num;
} else {
stats->tx_packets += agg->skb_num;
@@ -927,17 +1084,17 @@ resubmit:
netif_device_detach(tp->netdev);
else if (res)
netif_err(tp, intr, tp->netdev,
- "can't resubmit intr, status %d\n", res);
+ "can't resubmit intr, status %d\n", res);
}
static inline void *rx_agg_align(void *data)
{
- return (void *)ALIGN((uintptr_t)data, 8);
+ return (void *)ALIGN((uintptr_t)data, RX_ALIGN);
}
static inline void *tx_agg_align(void *data)
{
- return (void *)ALIGN((uintptr_t)data, 4);
+ return (void *)ALIGN((uintptr_t)data, TX_ALIGN);
}
static void free_all_mem(struct r8152 *tp)
@@ -945,40 +1102,28 @@ static void free_all_mem(struct r8152 *tp)
int i;
for (i = 0; i < RTL8152_MAX_RX; i++) {
- if (tp->rx_info[i].urb) {
- usb_free_urb(tp->rx_info[i].urb);
- tp->rx_info[i].urb = NULL;
- }
+ usb_free_urb(tp->rx_info[i].urb);
+ tp->rx_info[i].urb = NULL;
- if (tp->rx_info[i].buffer) {
- kfree(tp->rx_info[i].buffer);
- tp->rx_info[i].buffer = NULL;
- tp->rx_info[i].head = NULL;
- }
+ kfree(tp->rx_info[i].buffer);
+ tp->rx_info[i].buffer = NULL;
+ tp->rx_info[i].head = NULL;
}
for (i = 0; i < RTL8152_MAX_TX; i++) {
- if (tp->tx_info[i].urb) {
- usb_free_urb(tp->tx_info[i].urb);
- tp->tx_info[i].urb = NULL;
- }
+ usb_free_urb(tp->tx_info[i].urb);
+ tp->tx_info[i].urb = NULL;
- if (tp->tx_info[i].buffer) {
- kfree(tp->tx_info[i].buffer);
- tp->tx_info[i].buffer = NULL;
- tp->tx_info[i].head = NULL;
- }
+ kfree(tp->tx_info[i].buffer);
+ tp->tx_info[i].buffer = NULL;
+ tp->tx_info[i].head = NULL;
}
- if (tp->intr_urb) {
- usb_free_urb(tp->intr_urb);
- tp->intr_urb = NULL;
- }
+ usb_free_urb(tp->intr_urb);
+ tp->intr_urb = NULL;
- if (tp->intr_buff) {
- kfree(tp->intr_buff);
- tp->intr_buff = NULL;
- }
+ kfree(tp->intr_buff);
+ tp->intr_buff = NULL;
}
static int alloc_all_mem(struct r8152 *tp)
@@ -1006,7 +1151,8 @@ static int alloc_all_mem(struct r8152 *tp)
if (buf != rx_agg_align(buf)) {
kfree(buf);
- buf = kmalloc_node(rx_buf_sz + 8, GFP_KERNEL, node);
+ buf = kmalloc_node(rx_buf_sz + RX_ALIGN, GFP_KERNEL,
+ node);
if (!buf)
goto err1;
}
@@ -1031,7 +1177,8 @@ static int alloc_all_mem(struct r8152 *tp)
if (buf != tx_agg_align(buf)) {
kfree(buf);
- buf = kmalloc_node(rx_buf_sz + 4, GFP_KERNEL, node);
+ buf = kmalloc_node(rx_buf_sz + TX_ALIGN, GFP_KERNEL,
+ node);
if (!buf)
goto err1;
}
@@ -1231,7 +1378,7 @@ static void rx_bottom(struct r8152 *tp)
stats = rtl8152_get_stats(netdev);
- pkt_len -= 4; /* CRC */
+ pkt_len -= CRC_SIZE;
rx_data += sizeof(struct rx_desc);
skb = netdev_alloc_skb_ip_align(netdev, pkt_len);
@@ -1246,7 +1393,7 @@ static void rx_bottom(struct r8152 *tp)
stats->rx_packets++;
stats->rx_bytes += pkt_len;
- rx_data = rx_agg_align(rx_data + pkt_len + 4);
+ rx_data = rx_agg_align(rx_data + pkt_len + CRC_SIZE);
rx_desc = (struct rx_desc *)rx_data;
len_used = (int)(rx_data - (u8 *)agg->head);
len_used += sizeof(struct rx_desc);
@@ -1336,7 +1483,7 @@ static void rtl8152_tx_timeout(struct net_device *netdev)
struct r8152 *tp = netdev_priv(netdev);
int i;
- netif_warn(tp, tx_err, netdev, "Tx timeout.\n");
+ netif_warn(tp, tx_err, netdev, "Tx timeout\n");
for (i = 0; i < RTL8152_MAX_TX; i++)
usb_unlink_urb(tp->tx_info[i].urb);
}
@@ -1449,13 +1596,11 @@ static inline u8 rtl8152_get_speed(struct r8152 *tp)
return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
}
-static int rtl8152_enable(struct r8152 *tp)
+static void rtl_set_eee_plus(struct r8152 *tp)
{
u32 ocp_data;
- int i, ret;
u8 speed;
- set_tx_qlen(tp);
speed = rtl8152_get_speed(tp);
if (speed & _10bps) {
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
@@ -1466,6 +1611,12 @@ static int rtl8152_enable(struct r8152 *tp)
ocp_data &= ~EEEP_CR_EEEP_TX;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
}
+}
+
+static int rtl_enable(struct r8152 *tp)
+{
+ u32 ocp_data;
+ int i, ret;
r8152b_reset_packet_filter(tp);
@@ -1487,6 +1638,47 @@ static int rtl8152_enable(struct r8152 *tp)
return ret;
}
+static int rtl8152_enable(struct r8152 *tp)
+{
+ set_tx_qlen(tp);
+ rtl_set_eee_plus(tp);
+
+ return rtl_enable(tp);
+}
+
+static void r8153_set_rx_agg(struct r8152 *tp)
+{
+ u8 speed;
+
+ speed = rtl8152_get_speed(tp);
+ if (speed & _1000bps) {
+ if (tp->udev->speed == USB_SPEED_SUPER) {
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
+ RX_THR_SUPPER);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
+ EARLY_AGG_SUPPER);
+ } else {
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
+ RX_THR_HIGH);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
+ EARLY_AGG_HIGH);
+ }
+ } else {
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
+ EARLY_AGG_SLOW);
+ }
+}
+
+static int rtl8153_enable(struct r8152 *tp)
+{
+ set_tx_qlen(tp);
+ rtl_set_eee_plus(tp);
+ r8153_set_rx_agg(tp);
+
+ return rtl_enable(tp);
+}
+
static void rtl8152_disable(struct r8152 *tp)
{
struct net_device_stats *stats = rtl8152_get_stats(tp->netdev);
@@ -1596,7 +1788,7 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL);
ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
- ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_BUF_THR);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
@@ -1613,8 +1805,8 @@ static void r8152b_exit_oob(struct r8152 *tp)
static void r8152b_enter_oob(struct r8152 *tp)
{
- u32 ocp_data;
- int i;
+ u32 ocp_data;
+ int i;
ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
ocp_data &= ~NOW_IS_OOB;
@@ -1685,15 +1877,269 @@ static inline void r8152b_enable_aldps(struct r8152 *tp)
LINKENA | DIS_SDSAVE);
}
+static void r8153_hw_phy_cfg(struct r8152 *tp)
+{
+ u32 ocp_data;
+ u16 data;
+
+ ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
+ r8152_mdio_write(tp, MII_BMCR, BMCR_ANENABLE);
+
+ if (tp->version == RTL_VER_03) {
+ data = ocp_reg_read(tp, OCP_EEE_CFG);
+ data &= ~CTAP_SHORT_EN;
+ ocp_reg_write(tp, OCP_EEE_CFG, data);
+ }
+
+ data = ocp_reg_read(tp, OCP_POWER_CFG);
+ data |= EEE_CLKDIV_EN;
+ ocp_reg_write(tp, OCP_POWER_CFG, data);
+
+ data = ocp_reg_read(tp, OCP_DOWN_SPEED);
+ data |= EN_10M_BGOFF;
+ ocp_reg_write(tp, OCP_DOWN_SPEED, data);
+ data = ocp_reg_read(tp, OCP_POWER_CFG);
+ data |= EN_10M_PLLOFF;
+ ocp_reg_write(tp, OCP_POWER_CFG, data);
+ data = sram_read(tp, SRAM_IMPEDANCE);
+ data &= ~RX_DRIVING_MASK;
+ sram_write(tp, SRAM_IMPEDANCE, data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+ ocp_data |= PFM_PWM_SWITCH;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+ data = sram_read(tp, SRAM_LPF_CFG);
+ data |= LPF_AUTO_TUNE;
+ sram_write(tp, SRAM_LPF_CFG, data);
+
+ data = sram_read(tp, SRAM_10M_AMP1);
+ data |= GDAC_IB_UPALL;
+ sram_write(tp, SRAM_10M_AMP1, data);
+ data = sram_read(tp, SRAM_10M_AMP2);
+ data |= AMP_DN;
+ sram_write(tp, SRAM_10M_AMP2, data);
+}
+
+static void r8153_u1u2en(struct r8152 *tp, int enable)
+{
+ u8 u1u2[8];
+
+ if (enable)
+ memset(u1u2, 0xff, sizeof(u1u2));
+ else
+ memset(u1u2, 0x00, sizeof(u1u2));
+
+ usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
+}
+
+static void r8153_u2p3en(struct r8152 *tp, int enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
+ if (enable)
+ ocp_data |= U2P3_ENABLE;
+ else
+ ocp_data &= ~U2P3_ENABLE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+}
+
+static void r8153_power_cut_en(struct r8152 *tp, int enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+ if (enable)
+ ocp_data |= PWR_EN | PHASE2_EN;
+ else
+ ocp_data &= ~(PWR_EN | PHASE2_EN);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ ocp_data &= ~PCUT_STATUS;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+}
+
+static void r8153_teredo_off(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+ ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
+}
+
+static void r8153_first_init(struct r8152 *tp)
+{
+ u32 ocp_data;
+ int i;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+ ocp_data |= RXDY_GATED_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+ r8153_teredo_off(tp);
+
+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+ ocp_data &= ~RCR_ACPT_ALL;
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+ r8153_hw_phy_cfg(tp);
+
+ rtl8152_nic_reset(tp);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ ocp_data &= ~NOW_IS_OOB;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+ ocp_data &= ~MCU_BORW_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+ for (i = 0; i < 1000; i++) {
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ if (ocp_data & LINK_LIST_READY)
+ break;
+ mdelay(1);
+ }
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+ ocp_data |= RE_INIT_LL;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+ for (i = 0; i < 1000; i++) {
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ if (ocp_data & LINK_LIST_READY)
+ break;
+ mdelay(1);
+ }
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+ ocp_data &= ~CPCR_RX_VLAN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+ ocp_data |= TCR0_AUTO_FIFO;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+
+ rtl8152_nic_reset(tp);
+
+ /* rx share fifo credit full threshold */
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
+ /* TX share fifo free credit full threshold */
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
+
+ /* rx aggregation */
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+ ocp_data &= ~RX_AGG_DISABLE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+}
+
+static void r8153_enter_oob(struct r8152 *tp)
+{
+ u32 ocp_data;
+ int i;
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ ocp_data &= ~NOW_IS_OOB;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+ rtl8152_disable(tp);
+
+ for (i = 0; i < 1000; i++) {
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ if (ocp_data & LINK_LIST_READY)
+ break;
+ mdelay(1);
+ }
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+ ocp_data |= RE_INIT_LL;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+ for (i = 0; i < 1000; i++) {
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ if (ocp_data & LINK_LIST_READY)
+ break;
+ mdelay(1);
+ }
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+ ocp_data |= MAGIC_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+ ocp_data &= ~TEREDO_WAKE_MASK;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+ ocp_data |= CPCR_RX_VLAN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR);
+ ocp_data |= ALDPS_PROXY_MODE;
+ ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+ ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5, LAN_WAKE_EN);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+ ocp_data &= ~RXDY_GATED_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+
+ ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+ ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+ ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+}
+
+static void r8153_disable_aldps(struct r8152 *tp)
+{
+ u16 data;
+
+ data = ocp_reg_read(tp, OCP_POWER_CFG);
+ data &= ~EN_ALDPS;
+ ocp_reg_write(tp, OCP_POWER_CFG, data);
+ msleep(20);
+}
+
+static void r8153_enable_aldps(struct r8152 *tp)
+{
+ u16 data;
+
+ data = ocp_reg_read(tp, OCP_POWER_CFG);
+ data |= EN_ALDPS;
+ ocp_reg_write(tp, OCP_POWER_CFG, data);
+}
+
static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
{
- u16 bmcr, anar;
+ u16 bmcr, anar, gbcr;
int ret = 0;
cancel_delayed_work_sync(&tp->schedule);
anar = r8152_mdio_read(tp, MII_ADVERTISE);
anar &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
ADVERTISE_100HALF | ADVERTISE_100FULL);
+ if (tp->mii.supports_gmii) {
+ gbcr = r8152_mdio_read(tp, MII_CTRL1000);
+ gbcr &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ } else {
+ gbcr = 0;
+ }
if (autoneg == AUTONEG_DISABLE) {
if (speed == SPEED_10) {
@@ -1702,6 +2148,9 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
} else if (speed == SPEED_100) {
bmcr = BMCR_SPEED100;
anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+ } else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
+ bmcr = BMCR_SPEED1000;
+ gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
} else {
ret = -EINVAL;
goto out;
@@ -1723,6 +2172,16 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
anar |= ADVERTISE_10HALF;
anar |= ADVERTISE_100HALF;
}
+ } else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
+ if (duplex == DUPLEX_FULL) {
+ anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+ anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+ gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+ } else {
+ anar |= ADVERTISE_10HALF;
+ anar |= ADVERTISE_100HALF;
+ gbcr |= ADVERTISE_1000HALF;
+ }
} else {
ret = -EINVAL;
goto out;
@@ -1731,6 +2190,9 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
}
+ if (tp->mii.supports_gmii)
+ r8152_mdio_write(tp, MII_CTRL1000, gbcr);
+
r8152_mdio_write(tp, MII_ADVERTISE, anar);
r8152_mdio_write(tp, MII_BMCR, bmcr);
@@ -1752,6 +2214,15 @@ static void rtl8152_down(struct r8152 *tp)
r8152b_enable_aldps(tp);
}
+static void rtl8153_down(struct r8152 *tp)
+{
+ r8153_u1u2en(tp, 0);
+ r8153_power_cut_en(tp, 0);
+ r8153_disable_aldps(tp);
+ r8153_enter_oob(tp);
+ r8153_enable_aldps(tp);
+}
+
static void set_carrier(struct r8152 *tp)
{
struct net_device *netdev = tp->netdev;
@@ -1762,7 +2233,7 @@ static void set_carrier(struct r8152 *tp)
if (speed & LINK_STATUS) {
if (!(tp->speed & LINK_STATUS)) {
- rtl8152_enable(tp);
+ tp->rtl_ops.enable(tp);
set_bit(RTL8152_SET_RX_MODE, &tp->flags);
netif_carrier_on(netdev);
}
@@ -1770,7 +2241,7 @@ static void set_carrier(struct r8152 *tp)
if (tp->speed & LINK_STATUS) {
netif_carrier_off(netdev);
tasklet_disable(&tp->tl);
- rtl8152_disable(tp);
+ tp->rtl_ops.disable(tp);
tasklet_enable(&tp->tl);
}
}
@@ -1806,12 +2277,14 @@ static int rtl8152_open(struct net_device *netdev)
if (res) {
if (res == -ENODEV)
netif_device_detach(tp->netdev);
- netif_warn(tp, ifup, netdev,
- "intr_urb submit failed: %d\n", res);
+ netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
+ res);
return res;
}
- rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+ rtl8152_set_speed(tp, AUTONEG_ENABLE,
+ tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
+ DUPLEX_FULL);
tp->speed = 0;
netif_carrier_off(netdev);
netif_start_queue(netdev);
@@ -1830,7 +2303,7 @@ static int rtl8152_close(struct net_device *netdev)
cancel_delayed_work_sync(&tp->schedule);
netif_stop_queue(netdev);
tasklet_disable(&tp->tl);
- rtl8152_disable(tp);
+ tp->rtl_ops.disable(tp);
tasklet_enable(&tp->tl);
return res;
@@ -1851,9 +2324,16 @@ static void rtl_clear_bp(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_BP_BA, 0);
}
+static void r8153_clear_bp(struct r8152 *tp)
+{
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_BP_EN, 0);
+ rtl_clear_bp(tp);
+}
+
static void r8152b_enable_eee(struct r8152 *tp)
{
- u32 ocp_data;
+ u32 ocp_data;
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
ocp_data |= EEE_RX_EN | EEE_TX_EN;
@@ -1874,6 +2354,22 @@ static void r8152b_enable_eee(struct r8152 *tp)
ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
}
+static void r8153_enable_eee(struct r8152 *tp)
+{
+ u32 ocp_data;
+ u16 data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+ ocp_data |= EEE_RX_EN | EEE_TX_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+ data = ocp_reg_read(tp, OCP_EEE_CFG);
+ data |= EEE10_EN;
+ ocp_reg_write(tp, OCP_EEE_CFG, data);
+ data = ocp_reg_read(tp, OCP_EEE_CFG2);
+ data |= MY1000_EEE | MY100_EEE;
+ ocp_reg_write(tp, OCP_EEE_CFG2, data);
+}
+
static void r8152b_enable_fc(struct r8152 *tp)
{
u16 anar;
@@ -1909,7 +2405,7 @@ static void r8152b_init(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
- ocp_data &= ~RWSUME_INDICATE;
+ ocp_data &= ~RESUME_INDICATE;
ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
r8152b_exit_oob(tp);
@@ -1943,6 +2439,75 @@ static void r8152b_init(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
}
+static void r8153_init(struct r8152 *tp)
+{
+ u32 ocp_data;
+ int i;
+
+ r8153_u1u2en(tp, 0);
+
+ for (i = 0; i < 500; i++) {
+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+ AUTOLOAD_DONE)
+ break;
+ msleep(20);
+ }
+
+ for (i = 0; i < 500; i++) {
+ ocp_data = ocp_reg_read(tp, OCP_PHY_STATUS) & PHY_STAT_MASK;
+ if (ocp_data == PHY_STAT_LAN_ON || ocp_data == PHY_STAT_PWRDN)
+ break;
+ msleep(20);
+ }
+
+ r8153_u2p3en(tp, 0);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
+ ocp_data &= ~TIMER11_EN;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
+
+ r8153_clear_bp(tp);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+ ocp_data &= ~LED_MODE_MASK;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL);
+ ocp_data &= ~LPM_TIMER_MASK;
+ if (tp->udev->speed == USB_SPEED_SUPER)
+ ocp_data |= LPM_TIMER_500US;
+ else
+ ocp_data |= LPM_TIMER_500MS;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
+ ocp_data &= ~SEN_VAL_MASK;
+ ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
+
+ r8153_power_cut_en(tp, 0);
+ r8153_u1u2en(tp, 1);
+
+ r8153_first_init(tp);
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ALDPS_SPDWN_RATIO);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, EEE_SPDWN_RATIO);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PKT_AVAIL_SPDWN_EN | SUSPEND_SPDWN_EN |
+ U1U2_SPDWN_EN | L1_SPDWN_EN);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ PWRSAVE_SPDWN_EN | RXDV_SPDWN_EN | TX10MIDLE_EN |
+ TP100_SPDWN_EN | TP500_SPDWN_EN | TP1000_SPDWN_EN |
+ EEE_SPDWN_EN);
+
+ r8153_enable_eee(tp);
+ r8153_enable_aldps(tp);
+ r8152b_enable_fc(tp);
+
+ r8152_mdio_write(tp, MII_BMCR, BMCR_RESET | BMCR_ANENABLE |
+ BMCR_ANRESTART);
+}
+
static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
{
struct r8152 *tp = usb_get_intfdata(intf);
@@ -1956,7 +2521,7 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
tasklet_disable(&tp->tl);
}
- rtl8152_down(tp);
+ tp->rtl_ops.down(tp);
return 0;
}
@@ -1965,10 +2530,12 @@ static int rtl8152_resume(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
- r8152b_init(tp);
+ tp->rtl_ops.init(tp);
netif_device_attach(tp->netdev);
if (netif_running(tp->netdev)) {
- rtl8152_set_speed(tp, AUTONEG_ENABLE, SPEED_100, DUPLEX_FULL);
+ rtl8152_set_speed(tp, AUTONEG_ENABLE,
+ tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
+ DUPLEX_FULL);
tp->speed = 0;
netif_carrier_off(tp->netdev);
set_bit(WORK_ENABLE, &tp->flags);
@@ -2072,6 +2639,18 @@ static void r8152b_get_version(struct r8152 *tp)
case 0x4c10:
tp->version = RTL_VER_02;
break;
+ case 0x5c00:
+ tp->version = RTL_VER_03;
+ tp->mii.supports_gmii = 1;
+ break;
+ case 0x5c10:
+ tp->version = RTL_VER_04;
+ tp->mii.supports_gmii = 1;
+ break;
+ case 0x5c20:
+ tp->version = RTL_VER_05;
+ tp->mii.supports_gmii = 1;
+ break;
default:
netif_info(tp, probe, tp->netdev,
"Unknown version 0x%04x\n", version);
@@ -2079,6 +2658,80 @@ static void r8152b_get_version(struct r8152 *tp)
}
}
+static void rtl8152_unload(struct r8152 *tp)
+{
+ u32 ocp_data;
+
+ if (tp->version != RTL_VER_01) {
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+ ocp_data |= POWER_CUT;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+ }
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+ ocp_data &= ~RESUME_INDICATE;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+}
+
+static void rtl8153_unload(struct r8152 *tp)
+{
+ r8153_power_cut_en(tp, 1);
+}
+
+static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
+{
+ struct rtl_ops *ops = &tp->rtl_ops;
+ int ret = -ENODEV;
+
+ switch (id->idVendor) {
+ case VENDOR_ID_REALTEK:
+ switch (id->idProduct) {
+ case PRODUCT_ID_RTL8152:
+ ops->init = r8152b_init;
+ ops->enable = rtl8152_enable;
+ ops->disable = rtl8152_disable;
+ ops->down = rtl8152_down;
+ ops->unload = rtl8152_unload;
+ ret = 0;
+ break;
+ case PRODUCT_ID_RTL8153:
+ ops->init = r8153_init;
+ ops->enable = rtl8153_enable;
+ ops->disable = rtl8152_disable;
+ ops->down = rtl8153_down;
+ ops->unload = rtl8153_unload;
+ ret = 0;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case VENDOR_ID_SAMSUNG:
+ switch (id->idProduct) {
+ case PRODUCT_ID_SAMSUNG:
+ ops->init = r8153_init;
+ ops->enable = rtl8153_enable;
+ ops->disable = rtl8152_disable;
+ ops->down = rtl8153_down;
+ ops->unload = rtl8153_unload;
+ ret = 0;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ if (ret)
+ netif_err(tp, probe, tp->netdev, "Unknown Device\n");
+
+ return ret;
+}
+
static int rtl8152_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -2087,14 +2740,9 @@ static int rtl8152_probe(struct usb_interface *intf,
struct net_device *netdev;
int ret;
- if (udev->actconfig->desc.bConfigurationValue != 1) {
- usb_driver_set_configuration(udev, 1);
- return -ENODEV;
- }
-
netdev = alloc_etherdev(sizeof(struct r8152));
if (!netdev) {
- dev_err(&intf->dev, "Out of memory");
+ dev_err(&intf->dev, "Out of memory\n");
return -ENOMEM;
}
@@ -2102,12 +2750,17 @@ static int rtl8152_probe(struct usb_interface *intf,
tp = netdev_priv(netdev);
tp->msg_enable = 0x7FFF;
- tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
- INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
-
tp->udev = udev;
tp->netdev = netdev;
tp->intf = intf;
+
+ ret = rtl_ops_init(tp, id);
+ if (ret)
+ goto out;
+
+ tasklet_init(&tp->tl, bottom_half, (unsigned long)tp);
+ INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
+
netdev->netdev_ops = &rtl8152_netdev_ops;
netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
@@ -2124,7 +2777,7 @@ static int rtl8152_probe(struct usb_interface *intf,
tp->mii.supports_gmii = 0;
r8152b_get_version(tp);
- r8152b_init(tp);
+ tp->rtl_ops.init(tp);
set_ethernet_addr(tp);
ret = alloc_all_mem(tp);
@@ -2135,11 +2788,11 @@ static int rtl8152_probe(struct usb_interface *intf,
ret = register_netdev(netdev);
if (ret != 0) {
- netif_err(tp, probe, netdev, "couldn't register the device");
+ netif_err(tp, probe, netdev, "couldn't register the device\n");
goto out1;
}
- netif_info(tp, probe, netdev, "%s", DRIVER_VERSION);
+ netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
return 0;
@@ -2150,21 +2803,6 @@ out:
return ret;
}
-static void rtl8152_unload(struct r8152 *tp)
-{
- u32 ocp_data;
-
- if (tp->version != RTL_VER_01) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
- ocp_data |= POWER_CUT;
- ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
- }
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
- ocp_data &= ~RWSUME_INDICATE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
-}
-
static void rtl8152_disconnect(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
@@ -2174,7 +2812,7 @@ static void rtl8152_disconnect(struct usb_interface *intf)
set_bit(RTL8152_UNPLUG, &tp->flags);
tasklet_kill(&tp->tl);
unregister_netdev(tp->netdev);
- rtl8152_unload(tp);
+ tp->rtl_ops.unload(tp);
free_all_mem(tp);
free_netdev(tp->netdev);
}
@@ -2182,7 +2820,9 @@ static void rtl8152_disconnect(struct usb_interface *intf)
/* table of devices that work with this driver */
static struct usb_device_id rtl8152_table[] = {
- {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8152)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8153)},
+ {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, PRODUCT_ID_SAMSUNG)},
{}
};