summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/mac.c')
-rw-r--r--drivers/net/wireless/ath/ath10k/mac.c3069
1 files changed, 3069 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
new file mode 100644
index 000000000000..da5c333d0d4b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -0,0 +1,3069 @@
+/*
+ * Copyright (c) 2005-2011 Atheros Communications Inc.
+ * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "mac.h"
+
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+
+#include "core.h"
+#include "debug.h"
+#include "wmi.h"
+#include "htt.h"
+#include "txrx.h"
+
+/**********/
+/* Crypto */
+/**********/
+
+static int ath10k_send_key(struct ath10k_vif *arvif,
+ struct ieee80211_key_conf *key,
+ enum set_key_cmd cmd,
+ const u8 *macaddr)
+{
+ struct wmi_vdev_install_key_arg arg = {
+ .vdev_id = arvif->vdev_id,
+ .key_idx = key->keyidx,
+ .key_len = key->keylen,
+ .key_data = key->key,
+ .macaddr = macaddr,
+ };
+
+ if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE)
+ arg.key_flags = WMI_KEY_PAIRWISE;
+ else
+ arg.key_flags = WMI_KEY_GROUP;
+
+ switch (key->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
+ arg.key_cipher = WMI_CIPHER_AES_CCM;
+ key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
+ break;
+ case WLAN_CIPHER_SUITE_TKIP:
+ arg.key_cipher = WMI_CIPHER_TKIP;
+ arg.key_txmic_len = 8;
+ arg.key_rxmic_len = 8;
+ break;
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ arg.key_cipher = WMI_CIPHER_WEP;
+ /* AP/IBSS mode requires self-key to be groupwise
+ * Otherwise pairwise key must be set */
+ if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN))
+ arg.key_flags = WMI_KEY_PAIRWISE;
+ break;
+ default:
+ ath10k_warn("cipher %d is not supported\n", key->cipher);
+ return -EOPNOTSUPP;
+ }
+
+ if (cmd == DISABLE_KEY) {
+ arg.key_cipher = WMI_CIPHER_NONE;
+ arg.key_data = NULL;
+ }
+
+ return ath10k_wmi_vdev_install_key(arvif->ar, &arg);
+}
+
+static int ath10k_install_key(struct ath10k_vif *arvif,
+ struct ieee80211_key_conf *key,
+ enum set_key_cmd cmd,
+ const u8 *macaddr)
+{
+ struct ath10k *ar = arvif->ar;
+ int ret;
+
+ INIT_COMPLETION(ar->install_key_done);
+
+ ret = ath10k_send_key(arvif, key, cmd, macaddr);
+ if (ret)
+ return ret;
+
+ ret = wait_for_completion_timeout(&ar->install_key_done, 3*HZ);
+ if (ret == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
+ const u8 *addr)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ath10k_peer *peer;
+ int ret;
+ int i;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (!peer)
+ return -ENOENT;
+
+ for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
+ if (arvif->wep_keys[i] == NULL)
+ continue;
+
+ ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY,
+ addr);
+ if (ret)
+ return ret;
+
+ peer->keys[i] = arvif->wep_keys[i];
+ }
+
+ return 0;
+}
+
+static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
+ const u8 *addr)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ath10k_peer *peer;
+ int first_errno = 0;
+ int ret;
+ int i;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (!peer)
+ return -ENOENT;
+
+ for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+ if (peer->keys[i] == NULL)
+ continue;
+
+ ret = ath10k_install_key(arvif, peer->keys[i],
+ DISABLE_KEY, addr);
+ if (ret && first_errno == 0)
+ first_errno = ret;
+
+ if (ret)
+ ath10k_warn("could not remove peer wep key %d (%d)\n",
+ i, ret);
+
+ peer->keys[i] = NULL;
+ }
+
+ return first_errno;
+}
+
+static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
+ struct ieee80211_key_conf *key)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ath10k_peer *peer;
+ u8 addr[ETH_ALEN];
+ int first_errno = 0;
+ int ret;
+ int i;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ for (;;) {
+ /* since ath10k_install_key we can't hold data_lock all the
+ * time, so we try to remove the keys incrementally */
+ spin_lock_bh(&ar->data_lock);
+ i = 0;
+ list_for_each_entry(peer, &ar->peers, list) {
+ for (i = 0; i < ARRAY_SIZE(peer->keys); i++) {
+ if (peer->keys[i] == key) {
+ memcpy(addr, peer->addr, ETH_ALEN);
+ peer->keys[i] = NULL;
+ break;
+ }
+ }
+
+ if (i < ARRAY_SIZE(peer->keys))
+ break;
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ if (i == ARRAY_SIZE(peer->keys))
+ break;
+
+ ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr);
+ if (ret && first_errno == 0)
+ first_errno = ret;
+
+ if (ret)
+ ath10k_warn("could not remove key for %pM\n", addr);
+ }
+
+ return first_errno;
+}
+
+
+/*********************/
+/* General utilities */
+/*********************/
+
+static inline enum wmi_phy_mode
+chan_to_phymode(const struct cfg80211_chan_def *chandef)
+{
+ enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+ switch (chandef->chan->band) {
+ case IEEE80211_BAND_2GHZ:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ phymode = MODE_11G;
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ phymode = MODE_11NG_HT20;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ phymode = MODE_11NG_HT40;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ case NL80211_CHAN_WIDTH_80:
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ phymode = MODE_UNKNOWN;
+ break;
+ }
+ break;
+ case IEEE80211_BAND_5GHZ:
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ phymode = MODE_11A;
+ break;
+ case NL80211_CHAN_WIDTH_20:
+ phymode = MODE_11NA_HT20;
+ break;
+ case NL80211_CHAN_WIDTH_40:
+ phymode = MODE_11NA_HT40;
+ break;
+ case NL80211_CHAN_WIDTH_80:
+ phymode = MODE_11AC_VHT80;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ phymode = MODE_UNKNOWN;
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ WARN_ON(phymode == MODE_UNKNOWN);
+ return phymode;
+}
+
+static u8 ath10k_parse_mpdudensity(u8 mpdudensity)
+{
+/*
+ * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
+ * 0 for no restriction
+ * 1 for 1/4 us
+ * 2 for 1/2 us
+ * 3 for 1 us
+ * 4 for 2 us
+ * 5 for 4 us
+ * 6 for 8 us
+ * 7 for 16 us
+ */
+ switch (mpdudensity) {
+ case 0:
+ return 0;
+ case 1:
+ case 2:
+ case 3:
+ /* Our lower layer calculations limit our precision to
+ 1 microsecond */
+ return 1;
+ case 4:
+ return 2;
+ case 5:
+ return 4;
+ case 6:
+ return 8;
+ case 7:
+ return 16;
+ default:
+ return 0;
+ }
+}
+
+static int ath10k_peer_create(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_peer_create(ar, vdev_id, addr);
+ if (ret)
+ return ret;
+
+ ret = ath10k_wait_for_peer_created(ar, vdev_id, addr);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_peer_delete(ar, vdev_id, addr);
+ if (ret)
+ return ret;
+
+ ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id)
+{
+ struct ath10k_peer *peer, *tmp;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ list_for_each_entry_safe(peer, tmp, &ar->peers, list) {
+ if (peer->vdev_id != vdev_id)
+ continue;
+
+ ath10k_warn("removing stale peer %pM from vdev_id %d\n",
+ peer->addr, vdev_id);
+
+ list_del(&peer->list);
+ kfree(peer);
+ }
+ spin_unlock_bh(&ar->data_lock);
+}
+
+/************************/
+/* Interface management */
+/************************/
+
+static inline int ath10k_vdev_setup_sync(struct ath10k *ar)
+{
+ int ret;
+
+ ret = wait_for_completion_timeout(&ar->vdev_setup_done,
+ ATH10K_VDEV_SETUP_TIMEOUT_HZ);
+ if (ret == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int ath10k_vdev_start(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_conf *conf = &ar->hw->conf;
+ struct ieee80211_channel *channel = conf->chandef.chan;
+ struct wmi_vdev_start_request_arg arg = {};
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ INIT_COMPLETION(ar->vdev_setup_done);
+
+ arg.vdev_id = arvif->vdev_id;
+ arg.dtim_period = arvif->dtim_period;
+ arg.bcn_intval = arvif->beacon_interval;
+
+ arg.channel.freq = channel->center_freq;
+
+ arg.channel.band_center_freq1 = conf->chandef.center_freq1;
+
+ arg.channel.mode = chan_to_phymode(&conf->chandef);
+
+ arg.channel.min_power = channel->max_power * 3;
+ arg.channel.max_power = channel->max_power * 4;
+ arg.channel.max_reg_power = channel->max_reg_power * 4;
+ arg.channel.max_antenna_gain = channel->max_antenna_gain;
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ arg.ssid = arvif->u.ap.ssid;
+ arg.ssid_len = arvif->u.ap.ssid_len;
+ arg.hidden_ssid = arvif->u.ap.hidden_ssid;
+ } else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) {
+ arg.ssid = arvif->vif->bss_conf.ssid;
+ arg.ssid_len = arvif->vif->bss_conf.ssid_len;
+ }
+
+ ret = ath10k_wmi_vdev_start(ar, &arg);
+ if (ret) {
+ ath10k_warn("WMI vdev start failed: ret %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret) {
+ ath10k_warn("vdev setup failed %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int ath10k_vdev_stop(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ INIT_COMPLETION(ar->vdev_setup_done);
+
+ ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id);
+ if (ret) {
+ ath10k_warn("WMI vdev stop failed: ret %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret) {
+ ath10k_warn("vdev setup failed %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int ath10k_monitor_start(struct ath10k *ar, int vdev_id)
+{
+ struct ieee80211_channel *channel = ar->hw->conf.chandef.chan;
+ struct wmi_vdev_start_request_arg arg = {};
+ enum nl80211_channel_type type;
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ type = cfg80211_get_chandef_type(&ar->hw->conf.chandef);
+
+ arg.vdev_id = vdev_id;
+ arg.channel.freq = channel->center_freq;
+ arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1;
+
+ /* TODO setup this dynamically, what in case we
+ don't have any vifs? */
+ arg.channel.mode = chan_to_phymode(&ar->hw->conf.chandef);
+
+ arg.channel.min_power = channel->max_power * 3;
+ arg.channel.max_power = channel->max_power * 4;
+ arg.channel.max_reg_power = channel->max_reg_power * 4;
+ arg.channel.max_antenna_gain = channel->max_antenna_gain;
+
+ ret = ath10k_wmi_vdev_start(ar, &arg);
+ if (ret) {
+ ath10k_warn("Monitor vdev start failed: ret %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret) {
+ ath10k_warn("Monitor vdev setup failed %d\n", ret);
+ return ret;
+ }
+
+ ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr);
+ if (ret) {
+ ath10k_warn("Monitor vdev up failed: %d\n", ret);
+ goto vdev_stop;
+ }
+
+ ar->monitor_vdev_id = vdev_id;
+ ar->monitor_enabled = true;
+
+ return 0;
+
+vdev_stop:
+ ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+ if (ret)
+ ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+
+ return ret;
+}
+
+static int ath10k_monitor_stop(struct ath10k *ar)
+{
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ /* For some reasons, ath10k_wmi_vdev_down() here couse
+ * often ath10k_wmi_vdev_stop() to fail. Next we could
+ * not run monitor vdev and driver reload
+ * required. Don't see such problems we skip
+ * ath10k_wmi_vdev_down() here.
+ */
+
+ ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id);
+ if (ret)
+ ath10k_warn("Monitor vdev stop failed: %d\n", ret);
+
+ ret = ath10k_vdev_setup_sync(ar);
+ if (ret)
+ ath10k_warn("Monitor_down sync failed: %d\n", ret);
+
+ ar->monitor_enabled = false;
+ return ret;
+}
+
+static int ath10k_monitor_create(struct ath10k *ar)
+{
+ int bit, ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (ar->monitor_present) {
+ ath10k_warn("Monitor mode already enabled\n");
+ return 0;
+ }
+
+ bit = ffs(ar->free_vdev_map);
+ if (bit == 0) {
+ ath10k_warn("No free VDEV slots\n");
+ return -ENOMEM;
+ }
+
+ ar->monitor_vdev_id = bit - 1;
+ ar->free_vdev_map &= ~(1 << ar->monitor_vdev_id);
+
+ ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id,
+ WMI_VDEV_TYPE_MONITOR,
+ 0, ar->mac_addr);
+ if (ret) {
+ ath10k_warn("WMI vdev monitor create failed: ret %d\n", ret);
+ goto vdev_fail;
+ }
+
+ ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n",
+ ar->monitor_vdev_id);
+
+ ar->monitor_present = true;
+ return 0;
+
+vdev_fail:
+ /*
+ * Restore the ID to the global map.
+ */
+ ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
+ return ret;
+}
+
+static int ath10k_monitor_destroy(struct ath10k *ar)
+{
+ int ret = 0;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (!ar->monitor_present)
+ return 0;
+
+ ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id);
+ if (ret) {
+ ath10k_warn("WMI vdev monitor delete failed: %d\n", ret);
+ return ret;
+ }
+
+ ar->free_vdev_map |= 1 << (ar->monitor_vdev_id);
+ ar->monitor_present = false;
+
+ ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n",
+ ar->monitor_vdev_id);
+ return ret;
+}
+
+static void ath10k_control_beaconing(struct ath10k_vif *arvif,
+ struct ieee80211_bss_conf *info)
+{
+ int ret = 0;
+
+ if (!info->enable_beacon) {
+ ath10k_vdev_stop(arvif);
+ return;
+ }
+
+ arvif->tx_seq_no = 0x1000;
+
+ ret = ath10k_vdev_start(arvif);
+ if (ret)
+ return;
+
+ ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, 0, info->bssid);
+ if (ret) {
+ ath10k_warn("Failed to bring up VDEV: %d\n",
+ arvif->vdev_id);
+ return;
+ }
+ ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id);
+}
+
+static void ath10k_control_ibss(struct ath10k_vif *arvif,
+ struct ieee80211_bss_conf *info,
+ const u8 self_peer[ETH_ALEN])
+{
+ int ret = 0;
+
+ if (!info->ibss_joined) {
+ ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, self_peer);
+ if (ret)
+ ath10k_warn("Failed to delete IBSS self peer:%pM for VDEV:%d ret:%d\n",
+ self_peer, arvif->vdev_id, ret);
+
+ if (is_zero_ether_addr(arvif->u.ibss.bssid))
+ return;
+
+ ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id,
+ arvif->u.ibss.bssid);
+ if (ret) {
+ ath10k_warn("Failed to delete IBSS BSSID peer:%pM for VDEV:%d ret:%d\n",
+ arvif->u.ibss.bssid, arvif->vdev_id, ret);
+ return;
+ }
+
+ memset(arvif->u.ibss.bssid, 0, ETH_ALEN);
+
+ return;
+ }
+
+ ret = ath10k_peer_create(arvif->ar, arvif->vdev_id, self_peer);
+ if (ret) {
+ ath10k_warn("Failed to create IBSS self peer:%pM for VDEV:%d ret:%d\n",
+ self_peer, arvif->vdev_id, ret);
+ return;
+ }
+
+ ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_ATIM_WINDOW,
+ ATH10K_DEFAULT_ATIM);
+ if (ret)
+ ath10k_warn("Failed to set IBSS ATIM for VDEV:%d ret:%d\n",
+ arvif->vdev_id, ret);
+}
+
+/*
+ * Review this when mac80211 gains per-interface powersave support.
+ */
+static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath10k_generic_iter *ar_iter = data;
+ struct ieee80211_conf *conf = &ar_iter->ar->hw->conf;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ enum wmi_sta_powersave_param param;
+ enum wmi_sta_ps_mode psmode;
+ int ret;
+
+ if (vif->type != NL80211_IFTYPE_STATION)
+ return;
+
+ if (conf->flags & IEEE80211_CONF_PS) {
+ psmode = WMI_STA_PS_MODE_ENABLED;
+ param = WMI_STA_PS_PARAM_INACTIVITY_TIME;
+
+ ret = ath10k_wmi_set_sta_ps_param(ar_iter->ar,
+ arvif->vdev_id,
+ param,
+ conf->dynamic_ps_timeout);
+ if (ret) {
+ ath10k_warn("Failed to set inactivity time for VDEV: %d\n",
+ arvif->vdev_id);
+ return;
+ }
+
+ ar_iter->ret = ret;
+ } else {
+ psmode = WMI_STA_PS_MODE_DISABLED;
+ }
+
+ ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id,
+ psmode);
+ if (ar_iter->ret)
+ ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n",
+ psmode, arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n",
+ psmode, arvif->vdev_id);
+}
+
+/**********************/
+/* Station management */
+/**********************/
+
+static void ath10k_peer_assoc_h_basic(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_bss_conf *bss_conf,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ memcpy(arg->addr, sta->addr, ETH_ALEN);
+ arg->vdev_id = arvif->vdev_id;
+ arg->peer_aid = sta->aid;
+ arg->peer_flags |= WMI_PEER_AUTH;
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+ /*
+ * Seems FW have problems with Power Save in STA
+ * mode when we setup this parameter to high (eg. 5).
+ * Often we see that FW don't send NULL (with clean P flags)
+ * frame even there is info about buffered frames in beacons.
+ * Sometimes we have to wait more than 10 seconds before FW
+ * will wakeup. Often sending one ping from AP to our device
+ * just fail (more than 50%).
+ *
+ * Seems setting this FW parameter to 1 couse FW
+ * will check every beacon and will wakup immediately
+ * after detection buffered data.
+ */
+ arg->peer_listen_intval = 1;
+ else
+ arg->peer_listen_intval = ar->hw->conf.listen_interval;
+
+ arg->peer_num_spatial_streams = 1;
+
+ /*
+ * The assoc capabilities are available only in managed mode.
+ */
+ if (arvif->vdev_type == WMI_VDEV_TYPE_STA && bss_conf)
+ arg->peer_caps = bss_conf->assoc_capability;
+}
+
+static void ath10k_peer_assoc_h_crypto(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ struct ieee80211_vif *vif = arvif->vif;
+ struct ieee80211_bss_conf *info = &vif->bss_conf;
+ struct cfg80211_bss *bss;
+ const u8 *rsnie = NULL;
+ const u8 *wpaie = NULL;
+
+ bss = cfg80211_get_bss(ar->hw->wiphy, ar->hw->conf.chandef.chan,
+ info->bssid, NULL, 0, 0, 0);
+ if (bss) {
+ const struct cfg80211_bss_ies *ies;
+
+ rcu_read_lock();
+ rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN);
+
+ ies = rcu_dereference(bss->ies);
+
+ wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT,
+ WLAN_OUI_TYPE_MICROSOFT_WPA,
+ ies->data,
+ ies->len);
+ rcu_read_unlock();
+ cfg80211_put_bss(ar->hw->wiphy, bss);
+ }
+
+ /* FIXME: base on RSN IE/WPA IE is a correct idea? */
+ if (rsnie || wpaie) {
+ ath10k_dbg(ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__);
+ arg->peer_flags |= WMI_PEER_NEED_PTK_4_WAY;
+ }
+
+ if (wpaie) {
+ ath10k_dbg(ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__);
+ arg->peer_flags |= WMI_PEER_NEED_GTK_2_WAY;
+ }
+}
+
+static void ath10k_peer_assoc_h_rates(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates;
+ const struct ieee80211_supported_band *sband;
+ const struct ieee80211_rate *rates;
+ u32 ratemask;
+ int i;
+
+ sband = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
+ ratemask = sta->supp_rates[ar->hw->conf.chandef.chan->band];
+ rates = sband->bitrates;
+
+ rateset->num_rates = 0;
+
+ for (i = 0; i < 32; i++, ratemask >>= 1, rates++) {
+ if (!(ratemask & 1))
+ continue;
+
+ rateset->rates[rateset->num_rates] = rates->hw_value;
+ rateset->num_rates++;
+ }
+}
+
+static void ath10k_peer_assoc_h_ht(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+ int smps;
+ int i, n;
+
+ if (!ht_cap->ht_supported)
+ return;
+
+ arg->peer_flags |= WMI_PEER_HT;
+ arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
+ ht_cap->ampdu_factor)) - 1;
+
+ arg->peer_mpdu_density =
+ ath10k_parse_mpdudensity(ht_cap->ampdu_density);
+
+ arg->peer_ht_caps = ht_cap->cap;
+ arg->peer_rate_caps |= WMI_RC_HT_FLAG;
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING)
+ arg->peer_flags |= WMI_PEER_LDPC;
+
+ if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) {
+ arg->peer_flags |= WMI_PEER_40MHZ;
+ arg->peer_rate_caps |= WMI_RC_CW40_FLAG;
+ }
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
+ arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
+ arg->peer_rate_caps |= WMI_RC_SGI_FLAG;
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) {
+ arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG;
+ arg->peer_flags |= WMI_PEER_STBC;
+ }
+
+ if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) {
+ u32 stbc;
+ stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC;
+ stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT;
+ stbc = stbc << WMI_RC_RX_STBC_FLAG_S;
+ arg->peer_rate_caps |= stbc;
+ arg->peer_flags |= WMI_PEER_STBC;
+ }
+
+ smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS;
+ smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+ if (smps == WLAN_HT_CAP_SM_PS_STATIC) {
+ arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
+ arg->peer_flags |= WMI_PEER_STATIC_MIMOPS;
+ } else if (smps == WLAN_HT_CAP_SM_PS_DYNAMIC) {
+ arg->peer_flags |= WMI_PEER_SPATIAL_MUX;
+ arg->peer_flags |= WMI_PEER_DYN_MIMOPS;
+ }
+
+ if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2])
+ arg->peer_rate_caps |= WMI_RC_TS_FLAG;
+ else if (ht_cap->mcs.rx_mask[1])
+ arg->peer_rate_caps |= WMI_RC_DS_FLAG;
+
+ for (i = 0, n = 0; i < IEEE80211_HT_MCS_MASK_LEN*8; i++)
+ if (ht_cap->mcs.rx_mask[i/8] & (1 << i%8))
+ arg->peer_ht_rates.rates[n++] = i;
+
+ arg->peer_ht_rates.num_rates = n;
+ arg->peer_num_spatial_streams = max((n+7) / 8, 1);
+
+ ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n",
+ arg->peer_ht_rates.num_rates,
+ arg->peer_num_spatial_streams);
+}
+
+static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_bss_conf *bss_conf,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ u32 uapsd = 0;
+ u32 max_sp = 0;
+
+ if (sta->wme)
+ arg->peer_flags |= WMI_PEER_QOS;
+
+ if (sta->wme && sta->uapsd_queues) {
+ ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n",
+ sta->uapsd_queues, sta->max_sp);
+
+ arg->peer_flags |= WMI_PEER_APSD;
+ arg->peer_flags |= WMI_RC_UAPSD_FLAG;
+
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
+ uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC3_TRIGGER_EN;
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
+ uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC2_TRIGGER_EN;
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
+ uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC1_TRIGGER_EN;
+ if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
+ uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN |
+ WMI_AP_PS_UAPSD_AC0_TRIGGER_EN;
+
+
+ if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP)
+ max_sp = sta->max_sp;
+
+ ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+ sta->addr,
+ WMI_AP_PS_PEER_PARAM_UAPSD,
+ uapsd);
+
+ ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+ sta->addr,
+ WMI_AP_PS_PEER_PARAM_MAX_SP,
+ max_sp);
+
+ /* TODO setup this based on STA listen interval and
+ beacon interval. Currently we don't know
+ sta->listen_interval - mac80211 patch required.
+ Currently use 10 seconds */
+ ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id,
+ sta->addr,
+ WMI_AP_PS_PEER_PARAM_AGEOUT_TIME,
+ 10);
+ }
+}
+
+static void ath10k_peer_assoc_h_qos_sta(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_bss_conf *bss_conf,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ if (bss_conf->qos)
+ arg->peer_flags |= WMI_PEER_QOS;
+}
+
+static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
+
+ if (!vht_cap->vht_supported)
+ return;
+
+ arg->peer_flags |= WMI_PEER_VHT;
+
+ arg->peer_vht_caps = vht_cap->cap;
+
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_80)
+ arg->peer_flags |= WMI_PEER_80MHZ;
+
+ arg->peer_vht_rates.rx_max_rate =
+ __le16_to_cpu(vht_cap->vht_mcs.rx_highest);
+ arg->peer_vht_rates.rx_mcs_set =
+ __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map);
+ arg->peer_vht_rates.tx_max_rate =
+ __le16_to_cpu(vht_cap->vht_mcs.tx_highest);
+ arg->peer_vht_rates.tx_mcs_set =
+ __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map);
+
+ ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n");
+}
+
+static void ath10k_peer_assoc_h_qos(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_bss_conf *bss_conf,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ switch (arvif->vdev_type) {
+ case WMI_VDEV_TYPE_AP:
+ ath10k_peer_assoc_h_qos_ap(ar, arvif, sta, bss_conf, arg);
+ break;
+ case WMI_VDEV_TYPE_STA:
+ ath10k_peer_assoc_h_qos_sta(ar, arvif, sta, bss_conf, arg);
+ break;
+ default:
+ break;
+ }
+}
+
+static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta,
+ struct wmi_peer_assoc_complete_arg *arg)
+{
+ enum wmi_phy_mode phymode = MODE_UNKNOWN;
+
+ /* FIXME: add VHT */
+
+ switch (ar->hw->conf.chandef.chan->band) {
+ case IEEE80211_BAND_2GHZ:
+ if (sta->ht_cap.ht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11NG_HT40;
+ else
+ phymode = MODE_11NG_HT20;
+ } else {
+ phymode = MODE_11G;
+ }
+
+ break;
+ case IEEE80211_BAND_5GHZ:
+ if (sta->ht_cap.ht_supported) {
+ if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+ phymode = MODE_11NA_HT40;
+ else
+ phymode = MODE_11NA_HT20;
+ } else {
+ phymode = MODE_11A;
+ }
+
+ break;
+ default:
+ break;
+ }
+
+ arg->peer_phymode = phymode;
+ WARN_ON(phymode == MODE_UNKNOWN);
+}
+
+static int ath10k_peer_assoc(struct ath10k *ar,
+ struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_bss_conf *bss_conf)
+{
+ struct wmi_peer_assoc_complete_arg arg;
+
+ memset(&arg, 0, sizeof(struct wmi_peer_assoc_complete_arg));
+
+ ath10k_peer_assoc_h_basic(ar, arvif, sta, bss_conf, &arg);
+ ath10k_peer_assoc_h_crypto(ar, arvif, &arg);
+ ath10k_peer_assoc_h_rates(ar, sta, &arg);
+ ath10k_peer_assoc_h_ht(ar, sta, &arg);
+ ath10k_peer_assoc_h_vht(ar, sta, &arg);
+ ath10k_peer_assoc_h_qos(ar, arvif, sta, bss_conf, &arg);
+ ath10k_peer_assoc_h_phymode(ar, arvif, sta, &arg);
+
+ return ath10k_wmi_peer_assoc(ar, &arg);
+}
+
+/* can be called only in mac80211 callbacks due to `key_count` usage */
+static void ath10k_bss_assoc(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ieee80211_sta *ap_sta;
+ int ret;
+
+ rcu_read_lock();
+
+ ap_sta = ieee80211_find_sta(vif, bss_conf->bssid);
+ if (!ap_sta) {
+ ath10k_warn("Failed to find station entry for %pM\n",
+ bss_conf->bssid);
+ rcu_read_unlock();
+ return;
+ }
+
+ ret = ath10k_peer_assoc(ar, arvif, ap_sta, bss_conf);
+ if (ret) {
+ ath10k_warn("Peer assoc failed for %pM\n", bss_conf->bssid);
+ rcu_read_unlock();
+ return;
+ }
+
+ rcu_read_unlock();
+
+ ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid,
+ bss_conf->bssid);
+ if (ret)
+ ath10k_warn("VDEV: %d up failed: ret %d\n",
+ arvif->vdev_id, ret);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "VDEV: %d associated, BSSID: %pM, AID: %d\n",
+ arvif->vdev_id, bss_conf->bssid, bss_conf->aid);
+}
+
+/*
+ * FIXME: flush TIDs
+ */
+static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret;
+
+ /*
+ * For some reason, calling VDEV-DOWN before VDEV-STOP
+ * makes the FW to send frames via HTT after disassociation.
+ * No idea why this happens, even though VDEV-DOWN is supposed
+ * to be analogous to link down, so just stop the VDEV.
+ */
+ ret = ath10k_vdev_stop(arvif);
+ if (!ret)
+ ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n",
+ arvif->vdev_id);
+
+ /*
+ * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and
+ * report beacons from previously associated network through HTT.
+ * This in turn would spam mac80211 WARN_ON if we bring down all
+ * interfaces as it expects there is no rx when no interface is
+ * running.
+ */
+ ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+ if (ret)
+ ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n",
+ arvif->vdev_id, ret);
+
+ ath10k_wmi_flush_tx(ar);
+
+ arvif->def_wep_key_index = 0;
+}
+
+static int ath10k_station_assoc(struct ath10k *ar, struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta)
+{
+ int ret = 0;
+
+ ret = ath10k_peer_assoc(ar, arvif, sta, NULL);
+ if (ret) {
+ ath10k_warn("WMI peer assoc failed for %pM\n", sta->addr);
+ return ret;
+ }
+
+ ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
+ if (ret) {
+ ath10k_warn("could not install peer wep keys (%d)\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int ath10k_station_disassoc(struct ath10k *ar, struct ath10k_vif *arvif,
+ struct ieee80211_sta *sta)
+{
+ int ret = 0;
+
+ ret = ath10k_clear_peer_keys(arvif, sta->addr);
+ if (ret) {
+ ath10k_warn("could not clear all peer wep keys (%d)\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+/**************/
+/* Regulatory */
+/**************/
+
+static int ath10k_update_channel_list(struct ath10k *ar)
+{
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_supported_band **bands;
+ enum ieee80211_band band;
+ struct ieee80211_channel *channel;
+ struct wmi_scan_chan_list_arg arg = {0};
+ struct wmi_channel_arg *ch;
+ bool passive;
+ int len;
+ int ret;
+ int i;
+
+ bands = hw->wiphy->bands;
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!bands[band])
+ continue;
+
+ for (i = 0; i < bands[band]->n_channels; i++) {
+ if (bands[band]->channels[i].flags &
+ IEEE80211_CHAN_DISABLED)
+ continue;
+
+ arg.n_channels++;
+ }
+ }
+
+ len = sizeof(struct wmi_channel_arg) * arg.n_channels;
+ arg.channels = kzalloc(len, GFP_KERNEL);
+ if (!arg.channels)
+ return -ENOMEM;
+
+ ch = arg.channels;
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (!bands[band])
+ continue;
+
+ for (i = 0; i < bands[band]->n_channels; i++) {
+ channel = &bands[band]->channels[i];
+
+ if (channel->flags & IEEE80211_CHAN_DISABLED)
+ continue;
+
+ ch->allow_ht = true;
+
+ /* FIXME: when should we really allow VHT? */
+ ch->allow_vht = true;
+
+ ch->allow_ibss =
+ !(channel->flags & IEEE80211_CHAN_NO_IBSS);
+
+ ch->ht40plus =
+ !(channel->flags & IEEE80211_CHAN_NO_HT40PLUS);
+
+ passive = channel->flags & IEEE80211_CHAN_PASSIVE_SCAN;
+ ch->passive = passive;
+
+ ch->freq = channel->center_freq;
+ ch->min_power = channel->max_power * 3;
+ ch->max_power = channel->max_power * 4;
+ ch->max_reg_power = channel->max_reg_power * 4;
+ ch->max_antenna_gain = channel->max_antenna_gain;
+ ch->reg_class_id = 0; /* FIXME */
+
+ /* FIXME: why use only legacy modes, why not any
+ * HT/VHT modes? Would that even make any
+ * difference? */
+ if (channel->band == IEEE80211_BAND_2GHZ)
+ ch->mode = MODE_11G;
+ else
+ ch->mode = MODE_11A;
+
+ if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN))
+ continue;
+
+ ath10k_dbg(ATH10K_DBG_WMI,
+ "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n",
+ __func__, ch - arg.channels, arg.n_channels,
+ ch->freq, ch->max_power, ch->max_reg_power,
+ ch->max_antenna_gain, ch->mode);
+
+ ch++;
+ }
+ }
+
+ ret = ath10k_wmi_scan_chan_list(ar, &arg);
+ kfree(arg.channels);
+
+ return ret;
+}
+
+static void ath10k_reg_notifier(struct wiphy *wiphy,
+ struct regulatory_request *request)
+{
+ struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+ struct reg_dmn_pair_mapping *regpair;
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory);
+
+ ret = ath10k_update_channel_list(ar);
+ if (ret)
+ ath10k_warn("could not update channel list (%d)\n", ret);
+
+ regpair = ar->ath_common.regulatory.regpair;
+ /* Target allows setting up per-band regdomain but ath_common provides
+ * a combined one only */
+ ret = ath10k_wmi_pdev_set_regdomain(ar,
+ regpair->regDmnEnum,
+ regpair->regDmnEnum, /* 2ghz */
+ regpair->regDmnEnum, /* 5ghz */
+ regpair->reg_2ghz_ctl,
+ regpair->reg_5ghz_ctl);
+ if (ret)
+ ath10k_warn("could not set pdev regdomain (%d)\n", ret);
+}
+
+/***************/
+/* TX handlers */
+/***************/
+
+/*
+ * Frames sent to the FW have to be in "Native Wifi" format.
+ * Strip the QoS field from the 802.11 header.
+ */
+static void ath10k_tx_h_qos_workaround(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ u8 *qos_ctl;
+
+ if (!ieee80211_is_data_qos(hdr->frame_control))
+ return;
+
+ qos_ctl = ieee80211_get_qos_ctl(hdr);
+ memmove(qos_ctl, qos_ctl + IEEE80211_QOS_CTL_LEN,
+ skb->len - ieee80211_hdrlen(hdr->frame_control));
+ skb_trim(skb, skb->len - IEEE80211_QOS_CTL_LEN);
+}
+
+static void ath10k_tx_h_update_wep_key(struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_vif *vif = info->control.vif;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_key_conf *key = info->control.hw_key;
+ int ret;
+
+ /* TODO AP mode should be implemented */
+ if (vif->type != NL80211_IFTYPE_STATION)
+ return;
+
+ if (!ieee80211_has_protected(hdr->frame_control))
+ return;
+
+ if (!key)
+ return;
+
+ if (key->cipher != WLAN_CIPHER_SUITE_WEP40 &&
+ key->cipher != WLAN_CIPHER_SUITE_WEP104)
+ return;
+
+ if (key->keyidx == arvif->def_wep_key_index)
+ return;
+
+ ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx);
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_DEF_KEYID,
+ key->keyidx);
+ if (ret) {
+ ath10k_warn("could not update wep keyidx (%d)\n", ret);
+ return;
+ }
+
+ arvif->def_wep_key_index = key->keyidx;
+}
+
+static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_vif *vif = info->control.vif;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ /* This is case only for P2P_GO */
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP ||
+ arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ return;
+
+ if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) {
+ spin_lock_bh(&ar->data_lock);
+ if (arvif->u.ap.noa_data)
+ if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len,
+ GFP_ATOMIC))
+ memcpy(skb_put(skb, arvif->u.ap.noa_len),
+ arvif->u.ap.noa_data,
+ arvif->u.ap.noa_len);
+ spin_unlock_bh(&ar->data_lock);
+ }
+}
+
+static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ int ret;
+
+ if (ieee80211_is_mgmt(hdr->frame_control))
+ ret = ath10k_htt_mgmt_tx(ar->htt, skb);
+ else if (ieee80211_is_nullfunc(hdr->frame_control))
+ /* FW does not report tx status properly for NullFunc frames
+ * unless they are sent through mgmt tx path. mac80211 sends
+ * those frames when it detects link/beacon loss and depends on
+ * the tx status to be correct. */
+ ret = ath10k_htt_mgmt_tx(ar->htt, skb);
+ else
+ ret = ath10k_htt_tx(ar->htt, skb);
+
+ if (ret) {
+ ath10k_warn("tx failed (%d). dropping packet.\n", ret);
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_offchan_tx_purge(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->offchan_tx_queue);
+ if (!skb)
+ break;
+
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_offchan_tx_work(struct work_struct *work)
+{
+ struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work);
+ struct ath10k_peer *peer;
+ struct ieee80211_hdr *hdr;
+ struct sk_buff *skb;
+ const u8 *peer_addr;
+ int vdev_id;
+ int ret;
+
+ /* FW requirement: We must create a peer before FW will send out
+ * an offchannel frame. Otherwise the frame will be stuck and
+ * never transmitted. We delete the peer upon tx completion.
+ * It is unlikely that a peer for offchannel tx will already be
+ * present. However it may be in some rare cases so account for that.
+ * Otherwise we might remove a legitimate peer and break stuff. */
+
+ for (;;) {
+ skb = skb_dequeue(&ar->offchan_tx_queue);
+ if (!skb)
+ break;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n",
+ skb);
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ peer_addr = ieee80211_get_DA(hdr);
+ vdev_id = ATH10K_SKB_CB(skb)->htt.vdev_id;
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, vdev_id, peer_addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (peer)
+ ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n",
+ peer_addr, vdev_id);
+
+ if (!peer) {
+ ret = ath10k_peer_create(ar, vdev_id, peer_addr);
+ if (ret)
+ ath10k_warn("peer %pM on vdev %d not created (%d)\n",
+ peer_addr, vdev_id, ret);
+ }
+
+ spin_lock_bh(&ar->data_lock);
+ INIT_COMPLETION(ar->offchan_tx_completed);
+ ar->offchan_tx_skb = skb;
+ spin_unlock_bh(&ar->data_lock);
+
+ ath10k_tx_htt(ar, skb);
+
+ ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
+ 3 * HZ);
+ if (ret <= 0)
+ ath10k_warn("timed out waiting for offchannel skb %p\n",
+ skb);
+
+ if (!peer) {
+ ret = ath10k_peer_delete(ar, vdev_id, peer_addr);
+ if (ret)
+ ath10k_warn("peer %pM on vdev %d not deleted (%d)\n",
+ peer_addr, vdev_id, ret);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+ }
+}
+
+/************/
+/* Scanning */
+/************/
+
+/*
+ * This gets called if we dont get a heart-beat during scan.
+ * This may indicate the FW has hung and we need to abort the
+ * scan manually to prevent cancel_hw_scan() from deadlocking
+ */
+void ath10k_reset_scan(unsigned long ptr)
+{
+ struct ath10k *ar = (struct ath10k *)ptr;
+
+ spin_lock_bh(&ar->data_lock);
+ if (!ar->scan.in_progress) {
+ spin_unlock_bh(&ar->data_lock);
+ return;
+ }
+
+ ath10k_warn("scan timeout. resetting. fw issue?\n");
+
+ if (ar->scan.is_roc)
+ ieee80211_remain_on_channel_expired(ar->hw);
+ else
+ ieee80211_scan_completed(ar->hw, 1 /* aborted */);
+
+ ar->scan.in_progress = false;
+ complete_all(&ar->scan.completed);
+ spin_unlock_bh(&ar->data_lock);
+}
+
+static int ath10k_abort_scan(struct ath10k *ar)
+{
+ struct wmi_stop_scan_arg arg = {
+ .req_id = 1, /* FIXME */
+ .req_type = WMI_SCAN_STOP_ONE,
+ .u.scan_id = ATH10K_SCAN_ID,
+ };
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ del_timer_sync(&ar->scan.timeout);
+
+ spin_lock_bh(&ar->data_lock);
+ if (!ar->scan.in_progress) {
+ spin_unlock_bh(&ar->data_lock);
+ return 0;
+ }
+
+ ar->scan.aborting = true;
+ spin_unlock_bh(&ar->data_lock);
+
+ ret = ath10k_wmi_stop_scan(ar, &arg);
+ if (ret) {
+ ath10k_warn("could not submit wmi stop scan (%d)\n", ret);
+ return -EIO;
+ }
+
+ ath10k_wmi_flush_tx(ar);
+
+ ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ);
+ if (ret == 0)
+ ath10k_warn("timed out while waiting for scan to stop\n");
+
+ /* scan completion may be done right after we timeout here, so let's
+ * check the in_progress and tell mac80211 scan is completed. if we
+ * don't do that and FW fails to send us scan completion indication
+ * then userspace won't be able to scan anymore */
+ ret = 0;
+
+ spin_lock_bh(&ar->data_lock);
+ if (ar->scan.in_progress) {
+ ath10k_warn("could not stop scan. its still in progress\n");
+ ar->scan.in_progress = false;
+ ath10k_offchan_tx_purge(ar);
+ ret = -ETIMEDOUT;
+ }
+ spin_unlock_bh(&ar->data_lock);
+
+ return ret;
+}
+
+static int ath10k_start_scan(struct ath10k *ar,
+ const struct wmi_start_scan_arg *arg)
+{
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ ret = ath10k_wmi_start_scan(ar, arg);
+ if (ret)
+ return ret;
+
+ /* make sure we submit the command so the completion
+ * timeout makes sense */
+ ath10k_wmi_flush_tx(ar);
+
+ ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ);
+ if (ret == 0) {
+ ath10k_abort_scan(ar);
+ return ret;
+ }
+
+ /* the scan can complete earlier, before we even
+ * start the timer. in that case the timer handler
+ * checks ar->scan.in_progress and bails out if its
+ * false. Add a 200ms margin to account event/command
+ * processing. */
+ mod_timer(&ar->scan.timeout, jiffies +
+ msecs_to_jiffies(arg->max_scan_time+200));
+ return 0;
+}
+
+/**********************/
+/* mac80211 callbacks */
+/**********************/
+
+static void ath10k_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = NULL;
+ u32 vdev_id = 0;
+ u8 tid;
+
+ if (info->control.vif) {
+ arvif = ath10k_vif_to_arvif(info->control.vif);
+ vdev_id = arvif->vdev_id;
+ } else if (ar->monitor_enabled) {
+ vdev_id = ar->monitor_vdev_id;
+ }
+
+ /* We should disable CCK RATE due to P2P */
+ if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
+ ath10k_dbg(ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
+
+ /* we must calculate tid before we apply qos workaround
+ * as we'd lose the qos control field */
+ tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
+ if (ieee80211_is_data_qos(hdr->frame_control) &&
+ is_unicast_ether_addr(ieee80211_get_DA(hdr))) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+ }
+
+ ath10k_tx_h_qos_workaround(hw, control, skb);
+ ath10k_tx_h_update_wep_key(skb);
+ ath10k_tx_h_add_p2p_noa_ie(ar, skb);
+ ath10k_tx_h_seq_no(skb);
+
+ memset(ATH10K_SKB_CB(skb), 0, sizeof(*ATH10K_SKB_CB(skb)));
+ ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id;
+ ATH10K_SKB_CB(skb)->htt.tid = tid;
+
+ if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
+ spin_lock_bh(&ar->data_lock);
+ ATH10K_SKB_CB(skb)->htt.is_offchan = true;
+ ATH10K_SKB_CB(skb)->htt.vdev_id = ar->scan.vdev_id;
+ spin_unlock_bh(&ar->data_lock);
+
+ ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb);
+
+ skb_queue_tail(&ar->offchan_tx_queue, skb);
+ ieee80211_queue_work(hw, &ar->offchan_tx_work);
+ return;
+ }
+
+ ath10k_tx_htt(ar, skb);
+}
+
+/*
+ * Initialize various parameters with default vaules.
+ */
+static int ath10k_start(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1);
+ if (ret)
+ ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
+ ret);
+
+ ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0);
+ if (ret)
+ ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
+ ret);
+
+ return 0;
+}
+
+static void ath10k_stop(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+
+ /* avoid leaks in case FW never confirms scan for offchannel */
+ cancel_work_sync(&ar->offchan_tx_work);
+ ath10k_offchan_tx_purge(ar);
+}
+
+static int ath10k_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct ath10k_generic_iter ar_iter;
+ struct ath10k *ar = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ int ret = 0;
+ u32 flags;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+ ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n",
+ conf->chandef.chan->center_freq);
+ spin_lock_bh(&ar->data_lock);
+ ar->rx_channel = conf->chandef.chan;
+ spin_unlock_bh(&ar->data_lock);
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_PS) {
+ memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+ ar_iter.ar = ar;
+ flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+
+ ieee80211_iterate_active_interfaces_atomic(hw,
+ flags,
+ ath10k_ps_iter,
+ &ar_iter);
+
+ ret = ar_iter.ret;
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
+ if (conf->flags & IEEE80211_CONF_MONITOR)
+ ret = ath10k_monitor_create(ar);
+ else
+ ret = ath10k_monitor_destroy(ar);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+/*
+ * TODO:
+ * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE,
+ * because we will send mgmt frames without CCK. This requirement
+ * for P2P_FIND/GO_NEG should be handled by checking CCK flag
+ * in the TX packet.
+ */
+static int ath10k_add_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ enum wmi_sta_powersave_param param;
+ int ret = 0;
+ u32 value;
+ int bit;
+
+ mutex_lock(&ar->conf_mutex);
+
+ arvif->ar = ar;
+ arvif->vif = vif;
+
+ if ((vif->type == NL80211_IFTYPE_MONITOR) && ar->monitor_present) {
+ ath10k_warn("Only one monitor interface allowed\n");
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ bit = ffs(ar->free_vdev_map);
+ if (bit == 0) {
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ arvif->vdev_id = bit - 1;
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_NONE;
+ ar->free_vdev_map &= ~(1 << arvif->vdev_id);
+
+ if (ar->p2p)
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_DEVICE;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_UNSPECIFIED:
+ case NL80211_IFTYPE_STATION:
+ arvif->vdev_type = WMI_VDEV_TYPE_STA;
+ if (vif->p2p)
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_CLIENT;
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ arvif->vdev_type = WMI_VDEV_TYPE_IBSS;
+ break;
+ case NL80211_IFTYPE_AP:
+ arvif->vdev_type = WMI_VDEV_TYPE_AP;
+
+ if (vif->p2p)
+ arvif->vdev_subtype = WMI_VDEV_SUBTYPE_P2P_GO;
+ break;
+ case NL80211_IFTYPE_MONITOR:
+ arvif->vdev_type = WMI_VDEV_TYPE_MONITOR;
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n",
+ arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype);
+
+ ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type,
+ arvif->vdev_subtype, vif->addr);
+ if (ret) {
+ ath10k_warn("WMI vdev create failed: ret %d\n", ret);
+ goto exit;
+ }
+
+ ret = ath10k_wmi_vdev_set_param(ar, 0, WMI_VDEV_PARAM_DEF_KEYID,
+ arvif->def_wep_key_index);
+ if (ret)
+ ath10k_warn("Failed to set default keyid: %d\n", ret);
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_TX_ENCAP_TYPE,
+ ATH10K_HW_TXRX_NATIVE_WIFI);
+ if (ret)
+ ath10k_warn("Failed to set TX encap: %d\n", ret);
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ ret = ath10k_peer_create(ar, arvif->vdev_id, vif->addr);
+ if (ret) {
+ ath10k_warn("Failed to create peer for AP: %d\n", ret);
+ goto exit;
+ }
+ }
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_STA) {
+ param = WMI_STA_PS_PARAM_RX_WAKE_POLICY;
+ value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ param, value);
+ if (ret)
+ ath10k_warn("Failed to set RX wake policy: %d\n", ret);
+
+ param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD;
+ value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ param, value);
+ if (ret)
+ ath10k_warn("Failed to set TX wake thresh: %d\n", ret);
+
+ param = WMI_STA_PS_PARAM_PSPOLL_COUNT;
+ value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX;
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ param, value);
+ if (ret)
+ ath10k_warn("Failed to set PSPOLL count: %d\n", ret);
+ }
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+ ar->monitor_present = true;
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static void ath10k_remove_interface(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id);
+
+ ar->free_vdev_map |= 1 << (arvif->vdev_id);
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
+ ret = ath10k_peer_delete(arvif->ar, arvif->vdev_id, vif->addr);
+ if (ret)
+ ath10k_warn("Failed to remove peer for AP: %d\n", ret);
+
+ kfree(arvif->u.ap.noa_data);
+ }
+
+ ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id);
+ if (ret)
+ ath10k_warn("WMI vdev delete failed: %d\n", ret);
+
+ if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
+ ar->monitor_present = false;
+
+ ath10k_peer_cleanup(ar, arvif->vdev_id);
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+/*
+ * FIXME: Has to be verified.
+ */
+#define SUPPORTED_FILTERS \
+ (FIF_PROMISC_IN_BSS | \
+ FIF_ALLMULTI | \
+ FIF_CONTROL | \
+ FIF_PSPOLL | \
+ FIF_OTHER_BSS | \
+ FIF_BCN_PRBRESP_PROMISC | \
+ FIF_PROBE_REQ | \
+ FIF_FCSFAIL)
+
+static void ath10k_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ changed_flags &= SUPPORTED_FILTERS;
+ *total_flags &= SUPPORTED_FILTERS;
+ ar->filter_flags = *total_flags;
+
+ if ((ar->filter_flags & FIF_PROMISC_IN_BSS) &&
+ !ar->monitor_enabled) {
+ ret = ath10k_monitor_start(ar, ar->monitor_vdev_id);
+ if (ret)
+ ath10k_warn("Unable to start monitor mode\n");
+ else
+ ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n");
+ } else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) &&
+ ar->monitor_enabled) {
+ ret = ath10k_monitor_stop(ar);
+ if (ret)
+ ath10k_warn("Unable to stop monitor mode\n");
+ else
+ ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n");
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *info,
+ u32 changed)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (changed & BSS_CHANGED_IBSS)
+ ath10k_control_ibss(arvif, info, vif->addr);
+
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ arvif->beacon_interval = info->beacon_int;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_BEACON_INTERVAL,
+ arvif->beacon_interval);
+ if (ret)
+ ath10k_warn("Failed to set beacon interval for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Beacon interval: %d set for VDEV: %d\n",
+ arvif->beacon_interval, arvif->vdev_id);
+ }
+
+ if (changed & BSS_CHANGED_BEACON) {
+ ret = ath10k_wmi_pdev_set_param(ar,
+ WMI_PDEV_PARAM_BEACON_TX_MODE,
+ WMI_BEACON_STAGGERED_MODE);
+ if (ret)
+ ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Set staggered beacon mode for VDEV: %d\n",
+ arvif->vdev_id);
+ }
+
+ if (changed & BSS_CHANGED_BEACON_INFO) {
+ arvif->dtim_period = info->dtim_period;
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_DTIM_PERIOD,
+ arvif->dtim_period);
+ if (ret)
+ ath10k_warn("Failed to set dtim period for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Set dtim period: %d for VDEV: %d\n",
+ arvif->dtim_period, arvif->vdev_id);
+ }
+
+ if (changed & BSS_CHANGED_SSID &&
+ vif->type == NL80211_IFTYPE_AP) {
+ arvif->u.ap.ssid_len = info->ssid_len;
+ if (info->ssid_len)
+ memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len);
+ arvif->u.ap.hidden_ssid = info->hidden_ssid;
+ }
+
+ if (changed & BSS_CHANGED_BSSID) {
+ if (!is_zero_ether_addr(info->bssid)) {
+ ret = ath10k_peer_create(ar, arvif->vdev_id,
+ info->bssid);
+ if (ret)
+ ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
+ info->bssid, arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Added peer: %pM for VDEV: %d\n",
+ info->bssid, arvif->vdev_id);
+
+
+ if (vif->type == NL80211_IFTYPE_STATION) {
+ /*
+ * this is never erased as we it for crypto key
+ * clearing; this is FW requirement
+ */
+ memcpy(arvif->u.sta.bssid, info->bssid,
+ ETH_ALEN);
+
+ ret = ath10k_vdev_start(arvif);
+ if (!ret)
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "VDEV: %d started with BSSID: %pM\n",
+ arvif->vdev_id, info->bssid);
+ }
+
+ /*
+ * Mac80211 does not keep IBSS bssid when leaving IBSS,
+ * so driver need to store it. It is needed when leaving
+ * IBSS in order to remove BSSID peer.
+ */
+ if (vif->type == NL80211_IFTYPE_ADHOC)
+ memcpy(arvif->u.ibss.bssid, info->bssid,
+ ETH_ALEN);
+ }
+ }
+
+ if (changed & BSS_CHANGED_BEACON_ENABLED)
+ ath10k_control_beaconing(arvif, info);
+
+ if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+ u32 cts_prot;
+ if (info->use_cts_prot)
+ cts_prot = 1;
+ else
+ cts_prot = 0;
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_ENABLE_RTSCTS,
+ cts_prot);
+ if (ret)
+ ath10k_warn("Failed to set CTS prot for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Set CTS prot: %d for VDEV: %d\n",
+ cts_prot, arvif->vdev_id);
+ }
+
+ if (changed & BSS_CHANGED_ERP_SLOT) {
+ u32 slottime;
+ if (info->use_short_slot)
+ slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */
+
+ else
+ slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_SLOT_TIME,
+ slottime);
+ if (ret)
+ ath10k_warn("Failed to set erp slot for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Set slottime: %d for VDEV: %d\n",
+ slottime, arvif->vdev_id);
+ }
+
+ if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+ u32 preamble;
+ if (info->use_short_preamble)
+ preamble = WMI_VDEV_PREAMBLE_SHORT;
+ else
+ preamble = WMI_VDEV_PREAMBLE_LONG;
+
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_PREAMBLE,
+ preamble);
+ if (ret)
+ ath10k_warn("Failed to set preamble for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Set preamble: %d for VDEV: %d\n",
+ preamble, arvif->vdev_id);
+ }
+
+ if (changed & BSS_CHANGED_ASSOC) {
+ if (info->assoc)
+ ath10k_bss_assoc(hw, vif, info);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_scan_request *req)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct wmi_start_scan_arg arg;
+ int ret = 0;
+ int i;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ if (ar->scan.in_progress) {
+ spin_unlock_bh(&ar->data_lock);
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ INIT_COMPLETION(ar->scan.started);
+ INIT_COMPLETION(ar->scan.completed);
+ ar->scan.in_progress = true;
+ ar->scan.aborting = false;
+ ar->scan.is_roc = false;
+ ar->scan.vdev_id = arvif->vdev_id;
+ spin_unlock_bh(&ar->data_lock);
+
+ memset(&arg, 0, sizeof(arg));
+ ath10k_wmi_start_scan_init(ar, &arg);
+ arg.vdev_id = arvif->vdev_id;
+ arg.scan_id = ATH10K_SCAN_ID;
+
+ if (!req->no_cck)
+ arg.scan_ctrl_flags |= WMI_SCAN_ADD_CCK_RATES;
+
+ if (req->ie_len) {
+ arg.ie_len = req->ie_len;
+ memcpy(arg.ie, req->ie, arg.ie_len);
+ }
+
+ if (req->n_ssids) {
+ arg.n_ssids = req->n_ssids;
+ for (i = 0; i < arg.n_ssids; i++) {
+ arg.ssids[i].len = req->ssids[i].ssid_len;
+ arg.ssids[i].ssid = req->ssids[i].ssid;
+ }
+ }
+
+ if (req->n_channels) {
+ arg.n_channels = req->n_channels;
+ for (i = 0; i < arg.n_channels; i++)
+ arg.channels[i] = req->channels[i]->center_freq;
+ }
+
+ ret = ath10k_start_scan(ar, &arg);
+ if (ret) {
+ ath10k_warn("could not start hw scan (%d)\n", ret);
+ spin_lock_bh(&ar->data_lock);
+ ar->scan.in_progress = false;
+ spin_unlock_bh(&ar->data_lock);
+ }
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+ ret = ath10k_abort_scan(ar);
+ if (ret) {
+ ath10k_warn("couldn't abort scan (%d). forcefully sending scan completion to mac80211\n",
+ ret);
+ ieee80211_scan_completed(hw, 1 /* aborted */);
+ }
+ mutex_unlock(&ar->conf_mutex);
+}
+
+static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct ath10k_peer *peer;
+ const u8 *peer_addr;
+ bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104;
+ int ret = 0;
+
+ if (key->keyidx > WMI_MAX_KEY_INDEX)
+ return -ENOSPC;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (sta)
+ peer_addr = sta->addr;
+ else if (arvif->vdev_type == WMI_VDEV_TYPE_STA)
+ peer_addr = vif->bss_conf.bssid;
+ else
+ peer_addr = vif->addr;
+
+ key->hw_key_idx = key->keyidx;
+
+ /* the peer should not disappear in mid-way (unless FW goes awry) since
+ * we already hold conf_mutex. we just make sure its there now. */
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+ spin_unlock_bh(&ar->data_lock);
+
+ if (!peer) {
+ if (cmd == SET_KEY) {
+ ath10k_warn("cannot install key for non-existent peer %pM\n",
+ peer_addr);
+ ret = -EOPNOTSUPP;
+ goto exit;
+ } else {
+ /* if the peer doesn't exist there is no key to disable
+ * anymore */
+ goto exit;
+ }
+ }
+
+ if (is_wep) {
+ if (cmd == SET_KEY)
+ arvif->wep_keys[key->keyidx] = key;
+ else
+ arvif->wep_keys[key->keyidx] = NULL;
+
+ if (cmd == DISABLE_KEY)
+ ath10k_clear_vdev_key(arvif, key);
+ }
+
+ ret = ath10k_install_key(arvif, key, cmd, peer_addr);
+ if (ret) {
+ ath10k_warn("ath10k_install_key failed (%d)\n", ret);
+ goto exit;
+ }
+
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr);
+ if (peer && cmd == SET_KEY)
+ peer->keys[key->keyidx] = key;
+ else if (peer && cmd == DISABLE_KEY)
+ peer->keys[key->keyidx] = NULL;
+ else if (peer == NULL)
+ /* impossible unless FW goes crazy */
+ ath10k_warn("peer %pM disappeared!\n", peer_addr);
+ spin_unlock_bh(&ar->data_lock);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_sta_state(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ enum ieee80211_sta_state old_state,
+ enum ieee80211_sta_state new_state)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ int ret = 0;
+
+ mutex_lock(&ar->conf_mutex);
+
+ if (old_state == IEEE80211_STA_NOTEXIST &&
+ new_state == IEEE80211_STA_NONE &&
+ vif->type != NL80211_IFTYPE_STATION) {
+ /*
+ * New station addition.
+ */
+ ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr);
+ if (ret)
+ ath10k_warn("Failed to add peer: %pM for VDEV: %d\n",
+ sta->addr, arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Added peer: %pM for VDEV: %d\n",
+ sta->addr, arvif->vdev_id);
+ } else if ((old_state == IEEE80211_STA_NONE &&
+ new_state == IEEE80211_STA_NOTEXIST)) {
+ /*
+ * Existing station deletion.
+ */
+ ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
+ if (ret)
+ ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n",
+ sta->addr, arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Removed peer: %pM for VDEV: %d\n",
+ sta->addr, arvif->vdev_id);
+
+ if (vif->type == NL80211_IFTYPE_STATION)
+ ath10k_bss_disassoc(hw, vif);
+ } else if (old_state == IEEE80211_STA_AUTH &&
+ new_state == IEEE80211_STA_ASSOC &&
+ (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)) {
+ /*
+ * New association.
+ */
+ ret = ath10k_station_assoc(ar, arvif, sta);
+ if (ret)
+ ath10k_warn("Failed to associate station: %pM\n",
+ sta->addr);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Station %pM moved to assoc state\n",
+ sta->addr);
+ } else if (old_state == IEEE80211_STA_ASSOC &&
+ new_state == IEEE80211_STA_AUTH &&
+ (vif->type == NL80211_IFTYPE_AP ||
+ vif->type == NL80211_IFTYPE_ADHOC)) {
+ /*
+ * Disassociation.
+ */
+ ret = ath10k_station_disassoc(ar, arvif, sta);
+ if (ret)
+ ath10k_warn("Failed to disassociate station: %pM\n",
+ sta->addr);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Station %pM moved to disassociated state\n",
+ sta->addr);
+ }
+
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
+ u16 ac, bool enable)
+{
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ u32 value = 0;
+ int ret = 0;
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+ return 0;
+
+ switch (ac) {
+ case IEEE80211_AC_VO:
+ value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
+ break;
+ case IEEE80211_AC_VI:
+ value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
+ break;
+ case IEEE80211_AC_BE:
+ value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
+ break;
+ case IEEE80211_AC_BK:
+ value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
+ WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
+ break;
+ }
+
+ if (enable)
+ arvif->u.sta.uapsd |= value;
+ else
+ arvif->u.sta.uapsd &= ~value;
+
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ WMI_STA_PS_PARAM_UAPSD,
+ arvif->u.sta.uapsd);
+ if (ret) {
+ ath10k_warn("could not set uapsd params %d\n", ret);
+ goto exit;
+ }
+
+ if (arvif->u.sta.uapsd)
+ value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD;
+ else
+ value = WMI_STA_PS_RX_WAKE_POLICY_WAKE;
+
+ ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id,
+ WMI_STA_PS_PARAM_RX_WAKE_POLICY,
+ value);
+ if (ret)
+ ath10k_warn("could not set rx wake param %d\n", ret);
+
+exit:
+ return ret;
+}
+
+static int ath10k_conf_tx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, u16 ac,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct ath10k *ar = hw->priv;
+ struct wmi_wmm_params_arg *p = NULL;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ switch (ac) {
+ case IEEE80211_AC_VO:
+ p = &ar->wmm_params.ac_vo;
+ break;
+ case IEEE80211_AC_VI:
+ p = &ar->wmm_params.ac_vi;
+ break;
+ case IEEE80211_AC_BE:
+ p = &ar->wmm_params.ac_be;
+ break;
+ case IEEE80211_AC_BK:
+ p = &ar->wmm_params.ac_bk;
+ break;
+ }
+
+ if (WARN_ON(!p)) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ p->cwmin = params->cw_min;
+ p->cwmax = params->cw_max;
+ p->aifs = params->aifs;
+
+ /*
+ * The channel time duration programmed in the HW is in absolute
+ * microseconds, while mac80211 gives the txop in units of
+ * 32 microseconds.
+ */
+ p->txop = params->txop * 32;
+
+ /* FIXME: FW accepts wmm params per hw, not per vif */
+ ret = ath10k_wmi_pdev_set_wmm_params(ar, &ar->wmm_params);
+ if (ret) {
+ ath10k_warn("could not set wmm params %d\n", ret);
+ goto exit;
+ }
+
+ ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
+ if (ret)
+ ath10k_warn("could not set sta uapsd %d\n", ret);
+
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+#define ATH10K_ROC_TIMEOUT_HZ (2*HZ)
+
+static int ath10k_remain_on_channel(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_channel *chan,
+ int duration,
+ enum ieee80211_roc_type type)
+{
+ struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ struct wmi_start_scan_arg arg;
+ int ret;
+
+ mutex_lock(&ar->conf_mutex);
+
+ spin_lock_bh(&ar->data_lock);
+ if (ar->scan.in_progress) {
+ spin_unlock_bh(&ar->data_lock);
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ INIT_COMPLETION(ar->scan.started);
+ INIT_COMPLETION(ar->scan.completed);
+ INIT_COMPLETION(ar->scan.on_channel);
+ ar->scan.in_progress = true;
+ ar->scan.aborting = false;
+ ar->scan.is_roc = true;
+ ar->scan.vdev_id = arvif->vdev_id;
+ ar->scan.roc_freq = chan->center_freq;
+ spin_unlock_bh(&ar->data_lock);
+
+ memset(&arg, 0, sizeof(arg));
+ ath10k_wmi_start_scan_init(ar, &arg);
+ arg.vdev_id = arvif->vdev_id;
+ arg.scan_id = ATH10K_SCAN_ID;
+ arg.n_channels = 1;
+ arg.channels[0] = chan->center_freq;
+ arg.dwell_time_active = duration;
+ arg.dwell_time_passive = duration;
+ arg.max_scan_time = 2 * duration;
+ arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
+ arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ;
+
+ ret = ath10k_start_scan(ar, &arg);
+ if (ret) {
+ ath10k_warn("could not start roc scan (%d)\n", ret);
+ spin_lock_bh(&ar->data_lock);
+ ar->scan.in_progress = false;
+ spin_unlock_bh(&ar->data_lock);
+ goto exit;
+ }
+
+ ret = wait_for_completion_timeout(&ar->scan.on_channel, 3*HZ);
+ if (ret == 0) {
+ ath10k_warn("could not switch to channel for roc scan\n");
+ ath10k_abort_scan(ar);
+ ret = -ETIMEDOUT;
+ goto exit;
+ }
+
+ ret = 0;
+exit:
+ mutex_unlock(&ar->conf_mutex);
+ return ret;
+}
+
+static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+
+ mutex_lock(&ar->conf_mutex);
+ ath10k_abort_scan(ar);
+ mutex_unlock(&ar->conf_mutex);
+
+ return 0;
+}
+
+/*
+ * Both RTS and Fragmentation threshold are interface-specific
+ * in ath10k, but device-specific in mac80211.
+ */
+static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath10k_generic_iter *ar_iter = data;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ u32 rts = ar_iter->ar->hw->wiphy->rts_threshold;
+
+ rts = min_t(u32, rts, ATH10K_RTS_MAX);
+
+ ar_iter->ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_RTS_THRESHOLD,
+ rts);
+ if (ar_iter->ret)
+ ath10k_warn("Failed to set RTS threshold for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Set RTS threshold: %d for VDEV: %d\n",
+ rts, arvif->vdev_id);
+}
+
+static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct ath10k_generic_iter ar_iter;
+ struct ath10k *ar = hw->priv;
+
+ memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+ ar_iter.ar = ar;
+
+ mutex_lock(&ar->conf_mutex);
+ ieee80211_iterate_active_interfaces(hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ ath10k_set_rts_iter, &ar_iter);
+ mutex_unlock(&ar->conf_mutex);
+
+ return ar_iter.ret;
+}
+
+static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath10k_generic_iter *ar_iter = data;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+ u32 frag = ar_iter->ar->hw->wiphy->frag_threshold;
+ int ret;
+
+ frag = clamp_t(u32, frag,
+ ATH10K_FRAGMT_THRESHOLD_MIN,
+ ATH10K_FRAGMT_THRESHOLD_MAX);
+
+ ret = ath10k_wmi_vdev_set_param(ar_iter->ar, arvif->vdev_id,
+ WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
+ frag);
+
+ ar_iter->ret = ret;
+ if (ar_iter->ret)
+ ath10k_warn("Failed to set frag threshold for VDEV: %d\n",
+ arvif->vdev_id);
+ else
+ ath10k_dbg(ATH10K_DBG_MAC,
+ "Set frag threshold: %d for VDEV: %d\n",
+ frag, arvif->vdev_id);
+}
+
+static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
+{
+ struct ath10k_generic_iter ar_iter;
+ struct ath10k *ar = hw->priv;
+
+ memset(&ar_iter, 0, sizeof(struct ath10k_generic_iter));
+ ar_iter.ar = ar;
+
+ mutex_lock(&ar->conf_mutex);
+ ieee80211_iterate_active_interfaces(hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ ath10k_set_frag_iter, &ar_iter);
+ mutex_unlock(&ar->conf_mutex);
+
+ return ar_iter.ret;
+}
+
+static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
+{
+ struct ath10k *ar = hw->priv;
+ int ret;
+
+ /* mac80211 doesn't care if we really xmit queued frames or not
+ * we'll collect those frames either way if we stop/delete vdevs */
+ if (drop)
+ return;
+
+ ret = wait_event_timeout(ar->htt->empty_tx_wq, ({
+ bool empty;
+ spin_lock_bh(&ar->htt->tx_lock);
+ empty = bitmap_empty(ar->htt->used_msdu_ids,
+ ar->htt->max_num_pending_tx);
+ spin_unlock_bh(&ar->htt->tx_lock);
+ (empty);
+ }), ATH10K_FLUSH_TIMEOUT_HZ);
+ if (ret <= 0)
+ ath10k_warn("tx not flushed\n");
+}
+
+/* TODO: Implement this function properly
+ * For now it is needed to reply to Probe Requests in IBSS mode.
+ * Propably we need this information from FW.
+ */
+static int ath10k_tx_last_beacon(struct ieee80211_hw *hw)
+{
+ return 1;
+}
+
+static const struct ieee80211_ops ath10k_ops = {
+ .tx = ath10k_tx,
+ .start = ath10k_start,
+ .stop = ath10k_stop,
+ .config = ath10k_config,
+ .add_interface = ath10k_add_interface,
+ .remove_interface = ath10k_remove_interface,
+ .configure_filter = ath10k_configure_filter,
+ .bss_info_changed = ath10k_bss_info_changed,
+ .hw_scan = ath10k_hw_scan,
+ .cancel_hw_scan = ath10k_cancel_hw_scan,
+ .set_key = ath10k_set_key,
+ .sta_state = ath10k_sta_state,
+ .conf_tx = ath10k_conf_tx,
+ .remain_on_channel = ath10k_remain_on_channel,
+ .cancel_remain_on_channel = ath10k_cancel_remain_on_channel,
+ .set_rts_threshold = ath10k_set_rts_threshold,
+ .set_frag_threshold = ath10k_set_frag_threshold,
+ .flush = ath10k_flush,
+ .tx_last_beacon = ath10k_tx_last_beacon,
+};
+
+#define RATETAB_ENT(_rate, _rateid, _flags) { \
+ .bitrate = (_rate), \
+ .flags = (_flags), \
+ .hw_value = (_rateid), \
+}
+
+#define CHAN2G(_channel, _freq, _flags) { \
+ .band = IEEE80211_BAND_2GHZ, \
+ .hw_value = (_channel), \
+ .center_freq = (_freq), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+#define CHAN5G(_channel, _freq, _flags) { \
+ .band = IEEE80211_BAND_5GHZ, \
+ .hw_value = (_channel), \
+ .center_freq = (_freq), \
+ .flags = (_flags), \
+ .max_antenna_gain = 0, \
+ .max_power = 30, \
+}
+
+static const struct ieee80211_channel ath10k_2ghz_channels[] = {
+ CHAN2G(1, 2412, 0),
+ CHAN2G(2, 2417, 0),
+ CHAN2G(3, 2422, 0),
+ CHAN2G(4, 2427, 0),
+ CHAN2G(5, 2432, 0),
+ CHAN2G(6, 2437, 0),
+ CHAN2G(7, 2442, 0),
+ CHAN2G(8, 2447, 0),
+ CHAN2G(9, 2452, 0),
+ CHAN2G(10, 2457, 0),
+ CHAN2G(11, 2462, 0),
+ CHAN2G(12, 2467, 0),
+ CHAN2G(13, 2472, 0),
+ CHAN2G(14, 2484, 0),
+};
+
+static const struct ieee80211_channel ath10k_5ghz_channels[] = {
+ CHAN5G(36, 5180, 0),
+ CHAN5G(40, 5200, 0),
+ CHAN5G(44, 5220, 0),
+ CHAN5G(48, 5240, 0),
+ CHAN5G(52, 5260, 0),
+ CHAN5G(56, 5280, 0),
+ CHAN5G(60, 5300, 0),
+ CHAN5G(64, 5320, 0),
+ CHAN5G(100, 5500, 0),
+ CHAN5G(104, 5520, 0),
+ CHAN5G(108, 5540, 0),
+ CHAN5G(112, 5560, 0),
+ CHAN5G(116, 5580, 0),
+ CHAN5G(120, 5600, 0),
+ CHAN5G(124, 5620, 0),
+ CHAN5G(128, 5640, 0),
+ CHAN5G(132, 5660, 0),
+ CHAN5G(136, 5680, 0),
+ CHAN5G(140, 5700, 0),
+ CHAN5G(149, 5745, 0),
+ CHAN5G(153, 5765, 0),
+ CHAN5G(157, 5785, 0),
+ CHAN5G(161, 5805, 0),
+ CHAN5G(165, 5825, 0),
+};
+
+static struct ieee80211_rate ath10k_rates[] = {
+ /* CCK */
+ RATETAB_ENT(10, 0x82, 0),
+ RATETAB_ENT(20, 0x84, 0),
+ RATETAB_ENT(55, 0x8b, 0),
+ RATETAB_ENT(110, 0x96, 0),
+ /* OFDM */
+ RATETAB_ENT(60, 0x0c, 0),
+ RATETAB_ENT(90, 0x12, 0),
+ RATETAB_ENT(120, 0x18, 0),
+ RATETAB_ENT(180, 0x24, 0),
+ RATETAB_ENT(240, 0x30, 0),
+ RATETAB_ENT(360, 0x48, 0),
+ RATETAB_ENT(480, 0x60, 0),
+ RATETAB_ENT(540, 0x6c, 0),
+};
+
+#define ath10k_a_rates (ath10k_rates + 4)
+#define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - 4)
+#define ath10k_g_rates (ath10k_rates + 0)
+#define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates))
+
+struct ath10k *ath10k_mac_create(void)
+{
+ struct ieee80211_hw *hw;
+ struct ath10k *ar;
+
+ hw = ieee80211_alloc_hw(sizeof(struct ath10k), &ath10k_ops);
+ if (!hw)
+ return NULL;
+
+ ar = hw->priv;
+ ar->hw = hw;
+
+ return ar;
+}
+
+void ath10k_mac_destroy(struct ath10k *ar)
+{
+ ieee80211_free_hw(ar->hw);
+}
+
+static const struct ieee80211_iface_limit ath10k_if_limits[] = {
+ {
+ .max = 8,
+ .types = BIT(NL80211_IFTYPE_STATION)
+ | BIT(NL80211_IFTYPE_P2P_CLIENT)
+ | BIT(NL80211_IFTYPE_P2P_GO)
+ | BIT(NL80211_IFTYPE_AP)
+ }
+};
+
+static const struct ieee80211_iface_combination ath10k_if_comb = {
+ .limits = ath10k_if_limits,
+ .n_limits = ARRAY_SIZE(ath10k_if_limits),
+ .max_interfaces = 8,
+ .num_different_channels = 1,
+ .beacon_int_infra_match = true,
+};
+
+static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar)
+{
+ struct ieee80211_sta_vht_cap vht_cap = {0};
+ u16 mcs_map;
+
+ vht_cap.vht_supported = 1;
+ vht_cap.cap = ar->vht_cap_info;
+
+ /* FIXME: check dynamically how many streams board supports */
+ mcs_map = IEEE80211_VHT_MCS_SUPPORT_0_9 << 0 |
+ IEEE80211_VHT_MCS_SUPPORT_0_9 << 2 |
+ IEEE80211_VHT_MCS_SUPPORT_0_9 << 4 |
+ IEEE80211_VHT_MCS_NOT_SUPPORTED << 6 |
+ IEEE80211_VHT_MCS_NOT_SUPPORTED << 8 |
+ IEEE80211_VHT_MCS_NOT_SUPPORTED << 10 |
+ IEEE80211_VHT_MCS_NOT_SUPPORTED << 12 |
+ IEEE80211_VHT_MCS_NOT_SUPPORTED << 14;
+
+ vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map);
+ vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map);
+
+ return vht_cap;
+}
+
+static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar)
+{
+ int i;
+ struct ieee80211_sta_ht_cap ht_cap = {0};
+
+ if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED))
+ return ht_cap;
+
+ ht_cap.ht_supported = 1;
+ ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+ ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
+ ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40;
+ ht_cap.cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI)
+ ht_cap.cap |= IEEE80211_HT_CAP_SGI_20;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI)
+ ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) {
+ u32 smps;
+
+ smps = WLAN_HT_CAP_SM_PS_DYNAMIC;
+ smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT;
+
+ ht_cap.cap |= smps;
+ }
+
+ if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC)
+ ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) {
+ u32 stbc;
+
+ stbc = ar->ht_cap_info;
+ stbc &= WMI_HT_CAP_RX_STBC;
+ stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT;
+ stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT;
+ stbc &= IEEE80211_HT_CAP_RX_STBC;
+
+ ht_cap.cap |= stbc;
+ }
+
+ if (ar->ht_cap_info & WMI_HT_CAP_LDPC)
+ ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT)
+ ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT;
+
+ /* max AMSDU is implicitly taken from vht_cap_info */
+ if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK)
+ ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU;
+
+ for (i = 0; i < WMI_MAX_SPATIAL_STREAM; i++)
+ ht_cap.mcs.rx_mask[i] = 0xFF;
+
+ ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED;
+
+ return ht_cap;
+}
+
+
+static void ath10k_get_arvif_iter(void *data, u8 *mac,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k_vif_iter *arvif_iter = data;
+ struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+
+ if (arvif->vdev_id == arvif_iter->vdev_id)
+ arvif_iter->arvif = arvif;
+}
+
+struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id)
+{
+ struct ath10k_vif_iter arvif_iter;
+ u32 flags;
+
+ memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter));
+ arvif_iter.vdev_id = vdev_id;
+
+ flags = IEEE80211_IFACE_ITER_RESUME_ALL;
+ ieee80211_iterate_active_interfaces_atomic(ar->hw,
+ flags,
+ ath10k_get_arvif_iter,
+ &arvif_iter);
+ if (!arvif_iter.arvif) {
+ ath10k_warn("No VIF found for VDEV: %d\n", vdev_id);
+ return NULL;
+ }
+
+ return arvif_iter.arvif;
+}
+
+int ath10k_mac_register(struct ath10k *ar)
+{
+ struct ieee80211_supported_band *band;
+ struct ieee80211_sta_vht_cap vht_cap;
+ struct ieee80211_sta_ht_cap ht_cap;
+ void *channels;
+ int ret;
+
+ SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr);
+
+ SET_IEEE80211_DEV(ar->hw, ar->dev);
+
+ ht_cap = ath10k_get_ht_cap(ar);
+ vht_cap = ath10k_create_vht_cap(ar);
+
+ if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+ channels = kmemdup(ath10k_2ghz_channels,
+ sizeof(ath10k_2ghz_channels),
+ GFP_KERNEL);
+ if (!channels)
+ return -ENOMEM;
+
+ band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+ band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath10k_g_rates_size;
+ band->bitrates = ath10k_g_rates;
+ band->ht_cap = ht_cap;
+
+ /* vht is not supported in 2.4 GHz */
+
+ ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
+ }
+
+ if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) {
+ channels = kmemdup(ath10k_5ghz_channels,
+ sizeof(ath10k_5ghz_channels),
+ GFP_KERNEL);
+ if (!channels) {
+ if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) {
+ band = &ar->mac.sbands[IEEE80211_BAND_2GHZ];
+ kfree(band->channels);
+ }
+ return -ENOMEM;
+ }
+
+ band = &ar->mac.sbands[IEEE80211_BAND_5GHZ];
+ band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath10k_a_rates_size;
+ band->bitrates = ath10k_a_rates;
+ band->ht_cap = ht_cap;
+ band->vht_cap = vht_cap;
+ ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
+ }
+
+ ar->hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
+ BIT(NL80211_IFTYPE_P2P_GO);
+
+ ar->hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
+ IEEE80211_HW_SUPPORTS_UAPSD |
+ IEEE80211_HW_MFP_CAPABLE |
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+ IEEE80211_HW_HAS_RATE_CONTROL |
+ IEEE80211_HW_SUPPORTS_STATIC_SMPS |
+ IEEE80211_HW_WANT_MONITOR_VIF |
+ IEEE80211_HW_AP_LINK_PS;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS)
+ ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS;
+
+ if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) {
+ ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
+ ar->hw->flags |= IEEE80211_HW_TX_AMPDU_SETUP_IN_HW;
+ }
+
+ ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;
+ ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
+
+ ar->hw->vif_data_size = sizeof(struct ath10k_vif);
+
+ ar->hw->channel_change_time = 5000;
+ ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
+
+ ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+ ar->hw->wiphy->max_remain_on_channel_duration = 5000;
+
+ ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
+ /*
+ * on LL hardware queues are managed entirely by the FW
+ * so we only advertise to mac we can do the queues thing
+ */
+ ar->hw->queues = 4;
+
+ ar->hw->wiphy->iface_combinations = &ath10k_if_comb;
+ ar->hw->wiphy->n_iface_combinations = 1;
+
+ ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy,
+ ath10k_reg_notifier);
+ if (ret) {
+ ath10k_err("Regulatory initialization failed\n");
+ return ret;
+ }
+
+ ret = ieee80211_register_hw(ar->hw);
+ if (ret) {
+ ath10k_err("ieee80211 registration failed: %d\n", ret);
+ return ret;
+ }
+
+ if (!ath_is_world_regd(&ar->ath_common.regulatory)) {
+ ret = regulatory_hint(ar->hw->wiphy,
+ ar->ath_common.regulatory.alpha2);
+ if (ret)
+ goto exit;
+ }
+
+ return 0;
+exit:
+ ieee80211_unregister_hw(ar->hw);
+ return ret;
+}
+
+void ath10k_mac_unregister(struct ath10k *ar)
+{
+ ieee80211_unregister_hw(ar->hw);
+
+ kfree(ar->mac.sbands[IEEE80211_BAND_2GHZ].channels);
+ kfree(ar->mac.sbands[IEEE80211_BAND_5GHZ].channels);
+
+ SET_IEEE80211_DEV(ar->hw, NULL);
+}