diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/ahb.c | 4 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/core.h | 1 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/hw.c | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/mac.c | 8 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/pci.c | 30 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/sdio.c | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/usb.c | 10 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.c | 22 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi.h | 8 |
9 files changed, 68 insertions, 24 deletions
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c index ff6815e95684..1404ec9f56be 100644 --- a/drivers/net/wireless/ath/ath10k/ahb.c +++ b/drivers/net/wireless/ath/ath10k/ahb.c @@ -663,10 +663,10 @@ static void ath10k_ahb_hif_stop(struct ath10k *ar) ath10k_ahb_irq_disable(ar); synchronize_irq(ar_ahb->irq); - ath10k_pci_flush(ar); - napi_synchronize(&ar->napi); napi_disable(&ar->napi); + + ath10k_pci_flush(ar); } static int ath10k_ahb_hif_power_up(struct ath10k *ar) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 949ebb3e967b..be9ec265dfe5 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -881,6 +881,7 @@ struct ath10k { struct completion install_key_done; + int last_wmi_vdev_start_status; struct completion vdev_setup_done; struct workqueue_struct *workqueue; diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c index a860691d635d..e96534cd3d8b 100644 --- a/drivers/net/wireless/ath/ath10k/hw.c +++ b/drivers/net/wireless/ath/ath10k/hw.c @@ -168,7 +168,7 @@ const struct ath10k_hw_values qca6174_values = { }; const struct ath10k_hw_values qca99x0_values = { - .rtc_state_val_on = 5, + .rtc_state_val_on = 7, .ce_count = 12, .msi_assign_ce_max = 12, .num_target_ce_config_wlan = 10, diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index cdcfb175ad9b..dff34448588f 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -17,6 +17,7 @@ #include "mac.h" +#include <net/cfg80211.h> #include <net/mac80211.h> #include <linux/etherdevice.h> #include <linux/acpi.h> @@ -954,7 +955,7 @@ static inline int ath10k_vdev_setup_sync(struct ath10k *ar) if (time_left == 0) return -ETIMEDOUT; - return 0; + return ar->last_wmi_vdev_start_status; } static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) @@ -1611,6 +1612,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif) if (arvif->vdev_type != WMI_VDEV_TYPE_AP) return 0; + /* For mesh, probe response and beacon share the same template */ + if (ieee80211_vif_is_mesh(vif)) + return 0; + prb = ieee80211_proberesp_get(hw, vif); if (!prb) { ath10k_warn(ar, "failed to get probe resp template from mac80211\n"); @@ -8170,6 +8175,7 @@ int ath10k_mac_register(struct ath10k *ar) ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band; } + wiphy_read_of_freq_limits(ar->hw->wiphy); ath10k_mac_setup_ht_vht_cap(ar); ar->hw->wiphy->interface_modes = diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 6aed0a84ef01..03a84c6fb0c6 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1039,10 +1039,9 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, struct ath10k_ce *ce = ath10k_ce_priv(ar); int ret = 0; u32 *buf; - unsigned int completed_nbytes, orig_nbytes, remaining_bytes; + unsigned int completed_nbytes, alloc_nbytes, remaining_bytes; struct ath10k_ce_pipe *ce_diag; void *data_buf = NULL; - u32 ce_data; /* Host buffer address in CE space */ dma_addr_t ce_data_base = 0; int i; @@ -1056,9 +1055,10 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, * 1) 4-byte alignment * 2) Buffer in DMA-able space */ - orig_nbytes = nbytes; + alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT); + data_buf = (unsigned char *)dma_alloc_coherent(ar->dev, - orig_nbytes, + alloc_nbytes, &ce_data_base, GFP_ATOMIC); if (!data_buf) { @@ -1066,9 +1066,6 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, goto done; } - /* Copy caller's data to allocated DMA buf */ - memcpy(data_buf, data, orig_nbytes); - /* * The address supplied by the caller is in the * Target CPU virtual address space. @@ -1081,12 +1078,14 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, */ address = ath10k_pci_targ_cpu_to_ce_addr(ar, address); - remaining_bytes = orig_nbytes; - ce_data = ce_data_base; + remaining_bytes = nbytes; while (remaining_bytes) { /* FIXME: check cast */ nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT); + /* Copy caller's data to allocated DMA buf */ + memcpy(data_buf, data, nbytes); + /* Set up to receive directly into Target(!) address */ ret = __ath10k_ce_rx_post_buf(ce_diag, &address, address); if (ret != 0) @@ -1096,7 +1095,7 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, * Request CE to send caller-supplied data that * was copied to bounce buffer to Target(!) address. */ - ret = ath10k_ce_send_nolock(ce_diag, NULL, (u32)ce_data, + ret = ath10k_ce_send_nolock(ce_diag, NULL, ce_data_base, nbytes, 0, 0); if (ret != 0) goto done; @@ -1137,12 +1136,12 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, remaining_bytes -= nbytes; address += nbytes; - ce_data += nbytes; + data += nbytes; } done: if (data_buf) { - dma_free_coherent(ar->dev, orig_nbytes, data_buf, + dma_free_coherent(ar->dev, alloc_nbytes, data_buf, ce_data_base); } @@ -1772,6 +1771,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar) ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n"); + ath10k_pci_irq_disable(ar); + ath10k_pci_irq_sync(ar); + napi_synchronize(&ar->napi); + napi_disable(&ar->napi); + /* Most likely the device has HTT Rx ring configured. The only way to * prevent the device from accessing (and possible corrupting) host * memory is to reset the chip now. @@ -1785,8 +1789,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar) */ ath10k_pci_safe_chip_reset(ar); - ath10k_pci_irq_disable(ar); - ath10k_pci_irq_sync(ar); ath10k_pci_flush(ar); ath10k_pci_sleep_sync(ar); diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c index da9dbf3ddaa5..0a1248ebccf5 100644 --- a/drivers/net/wireless/ath/ath10k/sdio.c +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -610,6 +610,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar, full_len, last_in_bundle, last_in_bundle); + if (ret) { + ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret); + goto err; + } } ar_sdio->n_rx_pkts = i; @@ -2072,6 +2076,9 @@ static void ath10k_sdio_remove(struct sdio_func *func) cancel_work_sync(&ar_sdio->wr_async_work); ath10k_core_unregister(ar); ath10k_core_destroy(ar); + + flush_workqueue(ar_sdio->workqueue); + destroy_workqueue(ar_sdio->workqueue); } static const struct sdio_device_id ath10k_sdio_devices[] = { diff --git a/drivers/net/wireless/ath/ath10k/usb.c b/drivers/net/wireless/ath/ath10k/usb.c index d4803ff5a78a..f9c79e21ab22 100644 --- a/drivers/net/wireless/ath/ath10k/usb.c +++ b/drivers/net/wireless/ath/ath10k/usb.c @@ -49,6 +49,10 @@ ath10k_usb_alloc_urb_from_pipe(struct ath10k_usb_pipe *pipe) struct ath10k_urb_context *urb_context = NULL; unsigned long flags; + /* bail if this pipe is not initialized */ + if (!pipe->ar_usb) + return NULL; + spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags); if (!list_empty(&pipe->urb_list_head)) { urb_context = list_first_entry(&pipe->urb_list_head, @@ -66,6 +70,10 @@ static void ath10k_usb_free_urb_to_pipe(struct ath10k_usb_pipe *pipe, { unsigned long flags; + /* bail if this pipe is not initialized */ + if (!pipe->ar_usb) + return; + spin_lock_irqsave(&pipe->ar_usb->cs_lock, flags); pipe->urb_cnt++; @@ -1025,7 +1033,7 @@ static int ath10k_usb_probe(struct usb_interface *interface, } /* TODO: remove this once USB support is fully implemented */ - ath10k_warn(ar, "WARNING: ath10k USB support is incomplete, don't expect anything to work!\n"); + ath10k_warn(ar, "Warning: ath10k USB support is incomplete, don't expect anything to work!\n"); return 0; diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index ab8eb9cdfda0..25f51ca06093 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -2414,7 +2414,8 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb) status->freq, status->band, status->signal, status->rate_idx); - ieee80211_rx(ar->hw, skb); + ieee80211_rx_ni(ar->hw, skb); + return 0; } @@ -3132,18 +3133,31 @@ void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb) { struct wmi_vdev_start_ev_arg arg = {}; int ret; + u32 status; ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_VDEV_START_RESP_EVENTID\n"); + ar->last_wmi_vdev_start_status = 0; + ret = ath10k_wmi_pull_vdev_start(ar, skb, &arg); if (ret) { ath10k_warn(ar, "failed to parse vdev start event: %d\n", ret); - return; + ar->last_wmi_vdev_start_status = ret; + goto out; } - if (WARN_ON(__le32_to_cpu(arg.status))) - return; + status = __le32_to_cpu(arg.status); + if (WARN_ON_ONCE(status)) { + ath10k_warn(ar, "vdev-start-response reports status error: %d (%s)\n", + status, (status == WMI_VDEV_START_CHAN_INVALID) ? + "chan-invalid" : "unknown"); + /* Setup is done one way or another though, so we should still + * do the completion, so don't return here. + */ + ar->last_wmi_vdev_start_status = -EINVAL; + } +out: complete(&ar->vdev_setup_done); } diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index d0e05aa437e3..947b74c64fec 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -6480,11 +6480,17 @@ struct wmi_ch_info_ev_arg { __le32 rx_frame_count; }; +/* From 10.4 firmware, not sure all have the same values. */ +enum wmi_vdev_start_status { + WMI_VDEV_START_OK = 0, + WMI_VDEV_START_CHAN_INVALID, +}; + struct wmi_vdev_start_ev_arg { __le32 vdev_id; __le32 req_id; __le32 resp_type; /* %WMI_VDEV_RESP_ */ - __le32 status; + __le32 status; /* See wmi_vdev_start_status enum above */ }; struct wmi_peer_kick_ev_arg { |