summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k/reset.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/reset.c')
-rw-r--r--drivers/net/wireless/ath/ath5k/reset.c34
1 files changed, 17 insertions, 17 deletions
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 498aa28ea9e6..5b179d01f97d 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -167,7 +167,7 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
* ieee80211_duration() for a brief description of
* what rate we should choose to TX ACKs. */
tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
- sc->vif, 10, rate));
+ NULL, 10, rate));
ath5k_hw_reg_write(ah, tx_time, reg);
@@ -326,7 +326,7 @@ commit:
* register). After this MAC and Baseband are
* disabled and a full reset is needed to come
* back. This way we save as much power as possible
- * without puting the card on full sleep.
+ * without putting the card on full sleep.
*/
int ath5k_hw_on_hold(struct ath5k_hw *ah)
{
@@ -344,7 +344,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
/*
* Put chipset on warm reset...
*
- * Note: puting PCI core on warm reset on PCI-E cards
+ * Note: putting PCI core on warm reset on PCI-E cards
* results card to hang and always return 0xffff... so
* we ingore that flag for PCI-E cards. On PCI cards
* this flag gets cleared after 64 PCI clocks.
@@ -400,7 +400,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
/*
* Put chipset on warm reset...
*
- * Note: puting PCI core on warm reset on PCI-E cards
+ * Note: putting PCI core on warm reset on PCI-E cards
* results card to hang and always return 0xffff... so
* we ingore that flag for PCI-E cards. On PCI cards
* this flag gets cleared after 64 PCI clocks.
@@ -959,7 +959,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
AR5K_QUEUE_DCU_SEQNUM(0));
}
- /* TSF accelerates on AR5211 durring reset
+ /* TSF accelerates on AR5211 during reset
* As a workaround save it here and restore
* it later so that it's back in time after
* reset. This way it'll get re-synced on the
@@ -1060,7 +1060,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
* XXX: rethink this after new mode changes to
* mac80211 are integrated */
if (ah->ah_version == AR5K_AR5212 &&
- ah->ah_sc->vif != NULL)
+ ah->ah_sc->nvifs)
ath5k_hw_write_rate_duration(ah, mode);
/*
@@ -1080,7 +1080,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
return ret;
/* Spur info is available only from EEPROM versions
- * bigger than 5.3 but but the EEPOM routines will use
+ * greater than 5.3, but the EEPROM routines will use
* static values for older versions */
if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
ath5k_hw_set_spur_mitigation_filter(ah,
@@ -1160,7 +1160,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
*/
/* Restore bssid and bssid mask */
- ath5k_hw_set_associd(ah);
+ ath5k_hw_set_bssid(ah);
/* Set PCU config */
ath5k_hw_set_opmode(ah, op_mode);
@@ -1173,11 +1173,11 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/* Set RSSI/BRSSI thresholds
*
* Note: If we decide to set this value
- * dynamicaly, have in mind that when AR5K_RSSI_THR
- * register is read it might return 0x40 if we haven't
- * wrote anything to it plus BMISS RSSI threshold is zeroed.
+ * dynamically, keep in mind that when AR5K_RSSI_THR
+ * register is read, it might return 0x40 if we haven't
+ * written anything to it. Also, BMISS RSSI threshold is zeroed.
* So doing a save/restore procedure here isn't the right
- * choice. Instead store it on ath5k_hw */
+ * choice. Instead, store it in ath5k_hw */
ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
AR5K_TUNE_BMISS_THRES <<
AR5K_RSSI_THR_BMISS_S),
@@ -1235,7 +1235,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
/*
* Perform ADC test to see if baseband is ready
- * Set tx hold and check adc test register
+ * Set TX hold and check ADC test register
*/
phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
@@ -1254,15 +1254,15 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
*
* This method is used to calibrate some static offsets
* used together with on-the fly I/Q calibration (the
- * one performed via ath5k_hw_phy_calibrate), that doesn't
+ * one performed via ath5k_hw_phy_calibrate), which doesn't
* interrupt rx path.
*
* While rx path is re-routed to the power detector we also
- * start a noise floor calibration, to measure the
+ * start a noise floor calibration to measure the
* card's noise floor (the noise we measure when we are not
- * transmiting or receiving anything).
+ * transmitting or receiving anything).
*
- * If we are in a noisy environment AGC calibration may time
+ * If we are in a noisy environment, AGC calibration may time
* out and/or noise floor calibration might timeout.
*/
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,