diff options
Diffstat (limited to 'drivers/net/wireless/ath')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 143 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/ath9k.h | 8 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/init.c | 8 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/main.c | 10 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/ath9k/xmit.c | 7 | ||||
| -rw-r--r-- | drivers/net/wireless/ath/carl9170/rx.c | 2 |
6 files changed, 96 insertions, 82 deletions
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 78c26fdccad1..62ce2f4e8605 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -282,6 +282,34 @@ int ath5k_hw_phy_disable(struct ath5k_hw *ah) return 0; } +/* + * Wait for synth to settle + */ +static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + /* + * On 5211+ read activation -> rx delay + * and use it (100ns steps). + */ + if (ah->ah_version != AR5K_AR5210) { + u32 delay; + delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & + AR5K_PHY_RX_DELAY_M; + delay = (channel->hw_value & CHANNEL_CCK) ? + ((delay << 2) / 22) : (delay / 10); + if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) + delay = delay << 1; + if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) + delay = delay << 2; + /* XXX: /2 on turbo ? Let's be safe + * for now */ + udelay(100 + delay); + } else { + mdelay(1); + } +} + /**********************\ * RF Gain optimization * @@ -1253,6 +1281,7 @@ static int ath5k_hw_channel(struct ath5k_hw *ah, case AR5K_RF5111: ret = ath5k_hw_rf5111_channel(ah, channel); break; + case AR5K_RF2317: case AR5K_RF2425: ret = ath5k_hw_rf2425_channel(ah, channel); break; @@ -3237,6 +3266,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, /* Failed */ if (i >= 100) return -EIO; + + /* Set channel and wait for synth */ + ret = ath5k_hw_channel(ah, channel); + if (ret) + return ret; + + ath5k_hw_wait_for_synth(ah, channel); } /* @@ -3251,13 +3287,53 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; + /* Write OFDM timings on 5212*/ + if (ah->ah_version == AR5K_AR5212 && + channel->hw_value & CHANNEL_OFDM) { + + ret = ath5k_hw_write_ofdm_timings(ah, channel); + if (ret) + return ret; + + /* Spur info is available only from EEPROM versions + * greater than 5.3, but the EEPROM routines will use + * static values for older versions */ + if (ah->ah_mac_srev >= AR5K_SREV_AR5424) + ath5k_hw_set_spur_mitigation_filter(ah, + channel); + } + + /* If we used fast channel switching + * we are done, release RF bus and + * fire up NF calibration. + * + * Note: Only NF calibration due to + * channel change, not AGC calibration + * since AGC is still running ! + */ + if (fast) { + /* + * Release RF Bus grant + */ + AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, + AR5K_PHY_RFBUS_REQ_REQUEST); + + /* + * Start NF calibration + */ + AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL, + AR5K_PHY_AGCCTL_NF); + + return ret; + } + /* * For 5210 we do all initialization using * initvals, so we don't have to modify * any settings (5210 also only supports * a/aturbo modes) */ - if ((ah->ah_version != AR5K_AR5210) && !fast) { + if (ah->ah_version != AR5K_AR5210) { /* * Write initial RF gain settings @@ -3276,22 +3352,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, if (ret) return ret; - /* Write OFDM timings on 5212*/ - if (ah->ah_version == AR5K_AR5212 && - channel->hw_value & CHANNEL_OFDM) { - - ret = ath5k_hw_write_ofdm_timings(ah, channel); - if (ret) - return ret; - - /* Spur info is available only from EEPROM versions - * greater than 5.3, but the EEPROM routines will use - * static values for older versions */ - if (ah->ah_mac_srev >= AR5K_SREV_AR5424) - ath5k_hw_set_spur_mitigation_filter(ah, - channel); - } - /*Enable/disable 802.11b mode on 5111 (enable 2111 frequency converter + CCK)*/ if (ah->ah_radio == AR5K_RF5111) { @@ -3322,47 +3382,20 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel, */ ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT); + ath5k_hw_wait_for_synth(ah, channel); + /* - * On 5211+ read activation -> rx delay - * and use it. + * Perform ADC test to see if baseband is ready + * Set tx hold and check adc test register */ - if (ah->ah_version != AR5K_AR5210) { - u32 delay; - delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) & - AR5K_PHY_RX_DELAY_M; - delay = (channel->hw_value & CHANNEL_CCK) ? - ((delay << 2) / 22) : (delay / 10); - if (ah->ah_bwmode == AR5K_BWMODE_10MHZ) - delay = delay << 1; - if (ah->ah_bwmode == AR5K_BWMODE_5MHZ) - delay = delay << 2; - /* XXX: /2 on turbo ? Let's be safe - * for now */ - udelay(100 + delay); - } else { - mdelay(1); - } - - if (fast) - /* - * Release RF Bus grant - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ, - AR5K_PHY_RFBUS_REQ_REQUEST); - else { - /* - * Perform ADC test to see if baseband is ready - * Set tx hold and check adc test register - */ - phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); - ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); - for (i = 0; i <= 20; i++) { - if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) - break; - udelay(200); - } - ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); + phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1); + ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1); + for (i = 0; i <= 20; i++) { + if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10)) + break; + udelay(200); } + ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1); /* * Start automatic gain control calibration diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 3681caf54282..1a7fa6ea4cf5 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -21,7 +21,6 @@ #include <linux/device.h> #include <linux/leds.h> #include <linux/completion.h> -#include <linux/pm_qos_params.h> #include "debug.h" #include "common.h" @@ -57,8 +56,6 @@ struct ath_node; #define A_MAX(a, b) ((a) > (b) ? (a) : (b)) -#define ATH9K_PM_QOS_DEFAULT_VALUE 55 - #define TSF_TO_TU(_h,_l) \ ((((u32)(_h)) << 22) | (((u32)(_l)) >> 10)) @@ -218,6 +215,7 @@ struct ath_frame_info { struct ath_buf_state { u8 bf_type; u8 bfs_paprd; + unsigned long bfs_paprd_timestamp; enum ath9k_internal_frame_type bfs_ftype; }; @@ -593,7 +591,6 @@ struct ath_softc { struct work_struct paprd_work; struct work_struct hw_check_work; struct completion paprd_complete; - bool paprd_pending; u32 intrstatus; u32 sc_flags; /* SC_OP_* */ @@ -633,8 +630,6 @@ struct ath_softc { struct ath_descdma txsdma; struct ath_ant_comb ant_comb; - - struct pm_qos_request_list pm_qos_req; }; struct ath_wiphy { @@ -666,7 +661,6 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz) extern struct ieee80211_ops ath9k_ops; extern int ath9k_modparam_nohwcrypt; extern int led_blink; -extern int ath9k_pm_qos_value; extern bool is_ath9k_unloaded; irqreturn_t ath_isr(int irq, void *dev); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 087a6a95edd5..a033d01bf8a0 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -41,10 +41,6 @@ static int ath9k_btcoex_enable; module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); -int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE; -module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH); -MODULE_PARM_DESC(pmqos, "User specified PM-QOS value"); - bool is_ath9k_unloaded; /* We use the hw_value as an index into our private channel structure */ @@ -762,9 +758,6 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, ath_init_leds(sc); ath_start_rfkill_poll(sc); - pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, - PM_QOS_DEFAULT_VALUE); - return 0; error_world: @@ -831,7 +824,6 @@ void ath9k_deinit_device(struct ath_softc *sc) } ieee80211_unregister_hw(hw); - pm_qos_remove_request(&sc->pm_qos_req); ath_rx_cleanup(sc); ath_tx_cleanup(sc); ath9k_deinit_softc(sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9040c2ff1909..a09d15f7aa6e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -342,7 +342,6 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int tx_info->control.rates[1].idx = -1; init_completion(&sc->paprd_complete); - sc->paprd_pending = true; txctl.paprd = BIT(chain); if (ath_tx_start(hw, skb, &txctl) != 0) { @@ -353,7 +352,6 @@ static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int time_left = wait_for_completion_timeout(&sc->paprd_complete, msecs_to_jiffies(ATH_PAPRD_TIMEOUT)); - sc->paprd_pending = false; if (!time_left) ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE, @@ -1175,12 +1173,6 @@ static int ath9k_start(struct ieee80211_hw *hw) ath9k_btcoex_timer_resume(sc); } - /* User has the option to provide pm-qos value as a module - * parameter rather than using the default value of - * 'ATH9K_PM_QOS_DEFAULT_VALUE'. - */ - pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value); - if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en) common->bus_ops->extn_synch_en(common); @@ -1347,8 +1339,6 @@ static void ath9k_stop(struct ieee80211_hw *hw) sc->sc_flags |= SC_OP_INVALID; - pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE); - mutex_unlock(&sc->mutex); ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n"); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 33a37edbaf79..07b7804aec5b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1725,6 +1725,9 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf, ar9003_hw_set_paprd_txdesc(sc->sc_ah, bf->bf_desc, bf->bf_state.bfs_paprd); + if (txctl->paprd) + bf->bf_state.bfs_paprd_timestamp = jiffies; + ath_tx_send_normal(sc, txctl->txq, tid, &bf_head); } @@ -1886,7 +1889,9 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf, bf->bf_buf_addr = 0; if (bf->bf_state.bfs_paprd) { - if (!sc->paprd_pending) + if (time_after(jiffies, + bf->bf_state.bfs_paprd_timestamp + + msecs_to_jiffies(ATH_PAPRD_TIMEOUT))) dev_kfree_skb_any(skb); else complete(&sc->paprd_complete); diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c index 939a0e96ed1f..84866a4b8350 100644 --- a/drivers/net/wireless/ath/carl9170/rx.c +++ b/drivers/net/wireless/ath/carl9170/rx.c @@ -564,7 +564,7 @@ static void carl9170_ps_beacon(struct ar9170 *ar, void *data, unsigned int len) cam = ieee80211_check_tim(tim_ie, tim_len, ar->common.curaid); /* 2. Maybe the AP wants to send multicast/broadcast data? */ - cam = !!(tim_ie->bitmap_ctrl & 0x01); + cam |= !!(tim_ie->bitmap_ctrl & 0x01); if (!cam) { /* back to low-power land. */ |