diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd/include/sdioh.h')
| -rw-r--r-- | drivers/net/wireless/bcmdhd/include/sdioh.h | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd/include/sdioh.h b/drivers/net/wireless/bcmdhd/include/sdioh.h new file mode 100644 index 000000000000..5f47d6f88cea --- /dev/null +++ b/drivers/net/wireless/bcmdhd/include/sdioh.h @@ -0,0 +1,442 @@ +/* + * SDIO Host Controller Spec header file + * Register map and definitions for the Standard Host Controller + * + * Copyright (C) 1999-2011, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * $Id: sdioh.h 300017 2011-12-01 20:30:27Z $ + */ + +#ifndef _SDIOH_H +#define _SDIOH_H + +#define SD_SysAddr 0x000 +#define SD_BlockSize 0x004 +#define SD_BlockCount 0x006 +#define SD_Arg0 0x008 +#define SD_Arg1 0x00A +#define SD_TransferMode 0x00C +#define SD_Command 0x00E +#define SD_Response0 0x010 +#define SD_Response1 0x012 +#define SD_Response2 0x014 +#define SD_Response3 0x016 +#define SD_Response4 0x018 +#define SD_Response5 0x01A +#define SD_Response6 0x01C +#define SD_Response7 0x01E +#define SD_BufferDataPort0 0x020 +#define SD_BufferDataPort1 0x022 +#define SD_PresentState 0x024 +#define SD_HostCntrl 0x028 +#define SD_PwrCntrl 0x029 +#define SD_BlockGapCntrl 0x02A +#define SD_WakeupCntrl 0x02B +#define SD_ClockCntrl 0x02C +#define SD_TimeoutCntrl 0x02E +#define SD_SoftwareReset 0x02F +#define SD_IntrStatus 0x030 +#define SD_ErrorIntrStatus 0x032 +#define SD_IntrStatusEnable 0x034 +#define SD_ErrorIntrStatusEnable 0x036 +#define SD_IntrSignalEnable 0x038 +#define SD_ErrorIntrSignalEnable 0x03A +#define SD_CMD12ErrorStatus 0x03C +#define SD_Capabilities 0x040 +#define SD_Capabilities3 0x044 +#define SD_MaxCurCap 0x048 +#define SD_MaxCurCap_Reserved 0x04C +#define SD_ADMA_ErrStatus 0x054 +#define SD_ADMA_SysAddr 0x58 +#define SD_SlotInterruptStatus 0x0FC +#define SD_HostControllerVersion 0x0FE +#define SD_GPIO_Reg 0x100 +#define SD_GPIO_OE 0x104 +#define SD_GPIO_Enable 0x108 + + +/* SD specific registers in PCI config space */ +#define SD_SlotInfo 0x40 + +/* HC 3.0 specific registers and offsets */ +#define SD3_HostCntrl2 0x03E +/* preset regsstart and count */ +#define SD3_PresetValStart 0x060 +#define SD3_PresetValCount 8 +/* preset-indiv regs */ +#define SD3_PresetVal_init 0x060 +#define SD3_PresetVal_default 0x062 +#define SD3_PresetVal_HS 0x064 +#define SD3_PresetVal_SDR12 0x066 +#define SD3_PresetVal_SDR25 0x068 +#define SD3_PresetVal_SDR50 0x06a +#define SD3_PresetVal_SDR104 0x06c +#define SD3_PresetVal_DDR50 0x06e + +/* preset value indices */ +#define SD3_PRESETVAL_INITIAL_IX 0 +#define SD3_PRESETVAL_DESPEED_IX 1 +#define SD3_PRESETVAL_HISPEED_IX 2 +#define SD3_PRESETVAL_SDR12_IX 3 +#define SD3_PRESETVAL_SDR25_IX 4 +#define SD3_PRESETVAL_SDR50_IX 5 +#define SD3_PRESETVAL_SDR104_IX 6 +#define SD3_PRESETVAL_DDR50_IX 7 + +/* SD_Capabilities reg (0x040) */ +#define CAP_TO_CLKFREQ_M BITFIELD_MASK(6) +#define CAP_TO_CLKFREQ_S 0 +#define CAP_TO_CLKUNIT_M BITFIELD_MASK(1) +#define CAP_TO_CLKUNIT_S 7 +/* Note: for sdio-2.0 case, this mask has to be 6 bits, but msb 2 + bits are reserved. going ahead with 8 bits, as it is req for 3.0 +*/ +#define CAP_BASECLK_M BITFIELD_MASK(8) +#define CAP_BASECLK_S 8 +#define CAP_MAXBLOCK_M BITFIELD_MASK(2) +#define CAP_MAXBLOCK_S 16 +#define CAP_ADMA2_M BITFIELD_MASK(1) +#define CAP_ADMA2_S 19 +#define CAP_ADMA1_M BITFIELD_MASK(1) +#define CAP_ADMA1_S 20 +#define CAP_HIGHSPEED_M BITFIELD_MASK(1) +#define CAP_HIGHSPEED_S 21 +#define CAP_DMA_M BITFIELD_MASK(1) +#define CAP_DMA_S 22 +#define CAP_SUSPEND_M BITFIELD_MASK(1) +#define CAP_SUSPEND_S 23 +#define CAP_VOLT_3_3_M BITFIELD_MASK(1) +#define CAP_VOLT_3_3_S 24 +#define CAP_VOLT_3_0_M BITFIELD_MASK(1) +#define CAP_VOLT_3_0_S 25 +#define CAP_VOLT_1_8_M BITFIELD_MASK(1) +#define CAP_VOLT_1_8_S 26 +#define CAP_64BIT_HOST_M BITFIELD_MASK(1) +#define CAP_64BIT_HOST_S 28 + +#define SDIO_OCR_READ_FAIL (2) + + +#define CAP_ASYNCINT_SUP_M BITFIELD_MASK(1) +#define CAP_ASYNCINT_SUP_S 29 + +#define CAP_SLOTTYPE_M BITFIELD_MASK(2) +#define CAP_SLOTTYPE_S 30 + +#define CAP3_MSBits_OFFSET (32) +/* note: following are caps MSB32 bits. + So the bits start from 0, instead of 32. that is why + CAP3_MSBits_OFFSET is subtracted. +*/ +#define CAP3_SDR50_SUP_M BITFIELD_MASK(1) +#define CAP3_SDR50_SUP_S (32 - CAP3_MSBits_OFFSET) + +#define CAP3_SDR104_SUP_M BITFIELD_MASK(1) +#define CAP3_SDR104_SUP_S (33 - CAP3_MSBits_OFFSET) + +#define CAP3_DDR50_SUP_M BITFIELD_MASK(1) +#define CAP3_DDR50_SUP_S (34 - CAP3_MSBits_OFFSET) + +/* for knowing the clk caps in a single read */ +#define CAP3_30CLKCAP_M BITFIELD_MASK(3) +#define CAP3_30CLKCAP_S (32 - CAP3_MSBits_OFFSET) + +#define CAP3_DRIVTYPE_A_M BITFIELD_MASK(1) +#define CAP3_DRIVTYPE_A_S (36 - CAP3_MSBits_OFFSET) + +#define CAP3_DRIVTYPE_C_M BITFIELD_MASK(1) +#define CAP3_DRIVTYPE_C_S (37 - CAP3_MSBits_OFFSET) + +#define CAP3_DRIVTYPE_D_M BITFIELD_MASK(1) +#define CAP3_DRIVTYPE_D_S (38 - CAP3_MSBits_OFFSET) + +#define CAP3_RETUNING_TC_M BITFIELD_MASK(4) +#define CAP3_RETUNING_TC_S (40 - CAP3_MSBits_OFFSET) + +#define CAP3_TUNING_SDR50_M BITFIELD_MASK(1) +#define CAP3_TUNING_SDR50_S (45 - CAP3_MSBits_OFFSET) + +#define CAP3_RETUNING_MODES_M BITFIELD_MASK(2) +#define CAP3_RETUNING_MODES_S (46 - CAP3_MSBits_OFFSET) + +#define CAP3_CLK_MULT_M BITFIELD_MASK(8) +#define CAP3_CLK_MULT_S (48 - CAP3_MSBits_OFFSET) + +#define PRESET_DRIVR_SELECT_M BITFIELD_MASK(2) +#define PRESET_DRIVR_SELECT_S 14 + +#define PRESET_CLK_DIV_M BITFIELD_MASK(10) +#define PRESET_CLK_DIV_S 0 + +/* SD_MaxCurCap reg (0x048) */ +#define CAP_CURR_3_3_M BITFIELD_MASK(8) +#define CAP_CURR_3_3_S 0 +#define CAP_CURR_3_0_M BITFIELD_MASK(8) +#define CAP_CURR_3_0_S 8 +#define CAP_CURR_1_8_M BITFIELD_MASK(8) +#define CAP_CURR_1_8_S 16 + +/* SD_SysAddr: Offset 0x0000, Size 4 bytes */ + +/* SD_BlockSize: Offset 0x004, Size 2 bytes */ +#define BLKSZ_BLKSZ_M BITFIELD_MASK(12) +#define BLKSZ_BLKSZ_S 0 +#define BLKSZ_BNDRY_M BITFIELD_MASK(3) +#define BLKSZ_BNDRY_S 12 + +/* SD_BlockCount: Offset 0x006, size 2 bytes */ + +/* SD_Arg0: Offset 0x008, size = 4 bytes */ +/* SD_TransferMode Offset 0x00C, size = 2 bytes */ +#define XFER_DMA_ENABLE_M BITFIELD_MASK(1) +#define XFER_DMA_ENABLE_S 0 +#define XFER_BLK_COUNT_EN_M BITFIELD_MASK(1) +#define XFER_BLK_COUNT_EN_S 1 +#define XFER_CMD_12_EN_M BITFIELD_MASK(1) +#define XFER_CMD_12_EN_S 2 +#define XFER_DATA_DIRECTION_M BITFIELD_MASK(1) +#define XFER_DATA_DIRECTION_S 4 +#define XFER_MULTI_BLOCK_M BITFIELD_MASK(1) +#define XFER_MULTI_BLOCK_S 5 + +/* SD_Command: Offset 0x00E, size = 2 bytes */ +/* resp_type field */ +#define RESP_TYPE_NONE 0 +#define RESP_TYPE_136 1 +#define RESP_TYPE_48 2 +#define RESP_TYPE_48_BUSY 3 +/* type field */ +#define CMD_TYPE_NORMAL 0 +#define CMD_TYPE_SUSPEND 1 +#define CMD_TYPE_RESUME 2 +#define CMD_TYPE_ABORT 3 + +#define CMD_RESP_TYPE_M BITFIELD_MASK(2) /* Bits [0-1] - Response type */ +#define CMD_RESP_TYPE_S 0 +#define CMD_CRC_EN_M BITFIELD_MASK(1) /* Bit 3 - CRC enable */ +#define CMD_CRC_EN_S 3 +#define CMD_INDEX_EN_M BITFIELD_MASK(1) /* Bit 4 - Enable index checking */ +#define CMD_INDEX_EN_S 4 +#define CMD_DATA_EN_M BITFIELD_MASK(1) /* Bit 5 - Using DAT line */ +#define CMD_DATA_EN_S 5 +#define CMD_TYPE_M BITFIELD_MASK(2) /* Bit [6-7] - Normal, abort, resume, etc + */ +#define CMD_TYPE_S 6 +#define CMD_INDEX_M BITFIELD_MASK(6) /* Bits [8-13] - Command number */ +#define CMD_INDEX_S 8 + +/* SD_BufferDataPort0 : Offset 0x020, size = 2 or 4 bytes */ +/* SD_BufferDataPort1 : Offset 0x022, size = 2 bytes */ +/* SD_PresentState : Offset 0x024, size = 4 bytes */ +#define PRES_CMD_INHIBIT_M BITFIELD_MASK(1) /* Bit 0 May use CMD */ +#define PRES_CMD_INHIBIT_S 0 +#define PRES_DAT_INHIBIT_M BITFIELD_MASK(1) /* Bit 1 May use DAT */ +#define PRES_DAT_INHIBIT_S 1 +#define PRES_DAT_BUSY_M BITFIELD_MASK(1) /* Bit 2 DAT is busy */ +#define PRES_DAT_BUSY_S 2 +#define PRES_PRESENT_RSVD_M BITFIELD_MASK(5) /* Bit [3-7] rsvd */ +#define PRES_PRESENT_RSVD_S 3 +#define PRES_WRITE_ACTIVE_M BITFIELD_MASK(1) /* Bit 8 Write is active */ +#define PRES_WRITE_ACTIVE_S 8 +#define PRES_READ_ACTIVE_M BITFIELD_MASK(1) /* Bit 9 Read is active */ +#define PRES_READ_ACTIVE_S 9 +#define PRES_WRITE_DATA_RDY_M BITFIELD_MASK(1) /* Bit 10 Write buf is avail */ +#define PRES_WRITE_DATA_RDY_S 10 +#define PRES_READ_DATA_RDY_M BITFIELD_MASK(1) /* Bit 11 Read buf data avail */ +#define PRES_READ_DATA_RDY_S 11 +#define PRES_CARD_PRESENT_M BITFIELD_MASK(1) /* Bit 16 Card present - debounced */ +#define PRES_CARD_PRESENT_S 16 +#define PRES_CARD_STABLE_M BITFIELD_MASK(1) /* Bit 17 Debugging */ +#define PRES_CARD_STABLE_S 17 +#define PRES_CARD_PRESENT_RAW_M BITFIELD_MASK(1) /* Bit 18 Not debounced */ +#define PRES_CARD_PRESENT_RAW_S 18 +#define PRES_WRITE_ENABLED_M BITFIELD_MASK(1) /* Bit 19 Write protected? */ +#define PRES_WRITE_ENABLED_S 19 +#define PRES_DAT_SIGNAL_M BITFIELD_MASK(4) /* Bit [20-23] Debugging */ +#define PRES_DAT_SIGNAL_S 20 +#define PRES_CMD_SIGNAL_M BITFIELD_MASK(1) /* Bit 24 Debugging */ +#define PRES_CMD_SIGNAL_S 24 + +/* SD_HostCntrl: Offset 0x028, size = 1 bytes */ +#define HOST_LED_M BITFIELD_MASK(1) /* Bit 0 LED On/Off */ +#define HOST_LED_S 0 +#define HOST_DATA_WIDTH_M BITFIELD_MASK(1) /* Bit 1 4 bit enable */ +#define HOST_DATA_WIDTH_S 1 +#define HOST_HI_SPEED_EN_M BITFIELD_MASK(1) /* Bit 2 High speed vs low speed */ +#define HOST_DMA_SEL_S 3 +#define HOST_DMA_SEL_M BITFIELD_MASK(2) /* Bit 4:3 DMA Select */ +#define HOST_HI_SPEED_EN_S 2 + +/* Host Control2: */ +#define HOSTCtrl2_PRESVAL_EN_M BITFIELD_MASK(1) /* 1 bit */ +#define HOSTCtrl2_PRESVAL_EN_S 15 /* bit# */ + +#define HOSTCtrl2_ASYINT_EN_M BITFIELD_MASK(1) /* 1 bit */ +#define HOSTCtrl2_ASYINT_EN_S 14 /* bit# */ + +#define HOSTCtrl2_SAMPCLK_SEL_M BITFIELD_MASK(1) /* 1 bit */ +#define HOSTCtrl2_SAMPCLK_SEL_S 7 /* bit# */ + +#define HOSTCtrl2_EXEC_TUNING_M BITFIELD_MASK(1) /* 1 bit */ +#define HOSTCtrl2_EXEC_TUNING_S 6 /* bit# */ + +#define HOSTCtrl2_DRIVSTRENGTH_SEL_M BITFIELD_MASK(2) /* 2 bit */ +#define HOSTCtrl2_DRIVSTRENGTH_SEL_S 4 /* bit# */ + +#define HOSTCtrl2_1_8SIG_EN_M BITFIELD_MASK(1) /* 1 bit */ +#define HOSTCtrl2_1_8SIG_EN_S 3 /* bit# */ + +#define HOSTCtrl2_UHSMODE_SEL_M BITFIELD_MASK(3) /* 3 bit */ +#define HOSTCtrl2_UHSMODE_SEL_S 0 /* bit# */ + +#define HOST_CONTR_VER_2 (1) +#define HOST_CONTR_VER_3 (2) + +/* misc defines */ +#define SD1_MODE 0x1 /* SD Host Cntrlr Spec */ +#define SD4_MODE 0x2 /* SD Host Cntrlr Spec */ + +/* SD_PwrCntrl: Offset 0x029, size = 1 bytes */ +#define PWR_BUS_EN_M BITFIELD_MASK(1) /* Bit 0 Power the bus */ +#define PWR_BUS_EN_S 0 +#define PWR_VOLTS_M BITFIELD_MASK(3) /* Bit [1-3] Voltage Select */ +#define PWR_VOLTS_S 1 + +/* SD_SoftwareReset: Offset 0x02F, size = 1 byte */ +#define SW_RESET_ALL_M BITFIELD_MASK(1) /* Bit 0 Reset All */ +#define SW_RESET_ALL_S 0 +#define SW_RESET_CMD_M BITFIELD_MASK(1) /* Bit 1 CMD Line Reset */ +#define SW_RESET_CMD_S 1 +#define SW_RESET_DAT_M BITFIELD_MASK(1) /* Bit 2 DAT Line Reset */ +#define SW_RESET_DAT_S 2 + +/* SD_IntrStatus: Offset 0x030, size = 2 bytes */ +/* Defs also serve SD_IntrStatusEnable and SD_IntrSignalEnable */ +#define INTSTAT_CMD_COMPLETE_M BITFIELD_MASK(1) /* Bit 0 */ +#define INTSTAT_CMD_COMPLETE_S 0 +#define INTSTAT_XFER_COMPLETE_M BITFIELD_MASK(1) +#define INTSTAT_XFER_COMPLETE_S 1 +#define INTSTAT_BLOCK_GAP_EVENT_M BITFIELD_MASK(1) +#define INTSTAT_BLOCK_GAP_EVENT_S 2 +#define INTSTAT_DMA_INT_M BITFIELD_MASK(1) +#define INTSTAT_DMA_INT_S 3 +#define INTSTAT_BUF_WRITE_READY_M BITFIELD_MASK(1) +#define INTSTAT_BUF_WRITE_READY_S 4 +#define INTSTAT_BUF_READ_READY_M BITFIELD_MASK(1) +#define INTSTAT_BUF_READ_READY_S 5 +#define INTSTAT_CARD_INSERTION_M BITFIELD_MASK(1) +#define INTSTAT_CARD_INSERTION_S 6 +#define INTSTAT_CARD_REMOVAL_M BITFIELD_MASK(1) +#define INTSTAT_CARD_REMOVAL_S 7 +#define INTSTAT_CARD_INT_M BITFIELD_MASK(1) +#define INTSTAT_CARD_INT_S 8 +#define INTSTAT_RETUNING_INT_M BITFIELD_MASK(1) /* Bit 12 */ +#define INTSTAT_RETUNING_INT_S 12 +#define INTSTAT_ERROR_INT_M BITFIELD_MASK(1) /* Bit 15 */ +#define INTSTAT_ERROR_INT_S 15 + +/* SD_ErrorIntrStatus: Offset 0x032, size = 2 bytes */ +/* Defs also serve SD_ErrorIntrStatusEnable and SD_ErrorIntrSignalEnable */ +#define ERRINT_CMD_TIMEOUT_M BITFIELD_MASK(1) +#define ERRINT_CMD_TIMEOUT_S 0 +#define ERRINT_CMD_CRC_M BITFIELD_MASK(1) +#define ERRINT_CMD_CRC_S 1 +#define ERRINT_CMD_ENDBIT_M BITFIELD_MASK(1) +#define ERRINT_CMD_ENDBIT_S 2 +#define ERRINT_CMD_INDEX_M BITFIELD_MASK(1) +#define ERRINT_CMD_INDEX_S 3 +#define ERRINT_DATA_TIMEOUT_M BITFIELD_MASK(1) +#define ERRINT_DATA_TIMEOUT_S 4 +#define ERRINT_DATA_CRC_M BITFIELD_MASK(1) +#define ERRINT_DATA_CRC_S 5 +#define ERRINT_DATA_ENDBIT_M BITFIELD_MASK(1) +#define ERRINT_DATA_ENDBIT_S 6 +#define ERRINT_CURRENT_LIMIT_M BITFIELD_MASK(1) +#define ERRINT_CURRENT_LIMIT_S 7 +#define ERRINT_AUTO_CMD12_M BITFIELD_MASK(1) +#define ERRINT_AUTO_CMD12_S 8 +#define ERRINT_VENDOR_M BITFIELD_MASK(4) +#define ERRINT_VENDOR_S 12 +#define ERRINT_ADMA_M BITFIELD_MASK(1) +#define ERRINT_ADMA_S 9 + +/* Also provide definitions in "normal" form to allow combined masks */ +#define ERRINT_CMD_TIMEOUT_BIT 0x0001 +#define ERRINT_CMD_CRC_BIT 0x0002 +#define ERRINT_CMD_ENDBIT_BIT 0x0004 +#define ERRINT_CMD_INDEX_BIT 0x0008 +#define ERRINT_DATA_TIMEOUT_BIT 0x0010 +#define ERRINT_DATA_CRC_BIT 0x0020 +#define ERRINT_DATA_ENDBIT_BIT 0x0040 +#define ERRINT_CURRENT_LIMIT_BIT 0x0080 +#define ERRINT_AUTO_CMD12_BIT 0x0100 +#define ERRINT_ADMA_BIT 0x0200 + +/* Masks to select CMD vs. DATA errors */ +#define ERRINT_CMD_ERRS (ERRINT_CMD_TIMEOUT_BIT | ERRINT_CMD_CRC_BIT |\ + ERRINT_CMD_ENDBIT_BIT | ERRINT_CMD_INDEX_BIT) +#define ERRINT_DATA_ERRS (ERRINT_DATA_TIMEOUT_BIT | ERRINT_DATA_CRC_BIT |\ + ERRINT_DATA_ENDBIT_BIT | ERRINT_ADMA_BIT) +#define ERRINT_TRANSFER_ERRS (ERRINT_CMD_ERRS | ERRINT_DATA_ERRS) + +/* SD_WakeupCntr_BlockGapCntrl : Offset 0x02A , size = bytes */ +/* SD_ClockCntrl : Offset 0x02C , size = bytes */ +/* SD_SoftwareReset_TimeoutCntrl : Offset 0x02E , size = bytes */ +/* SD_IntrStatus : Offset 0x030 , size = bytes */ +/* SD_ErrorIntrStatus : Offset 0x032 , size = bytes */ +/* SD_IntrStatusEnable : Offset 0x034 , size = bytes */ +/* SD_ErrorIntrStatusEnable : Offset 0x036 , size = bytes */ +/* SD_IntrSignalEnable : Offset 0x038 , size = bytes */ +/* SD_ErrorIntrSignalEnable : Offset 0x03A , size = bytes */ +/* SD_CMD12ErrorStatus : Offset 0x03C , size = bytes */ +/* SD_Capabilities : Offset 0x040 , size = bytes */ +/* SD_MaxCurCap : Offset 0x048 , size = bytes */ +/* SD_MaxCurCap_Reserved: Offset 0x04C , size = bytes */ +/* SD_SlotInterruptStatus: Offset 0x0FC , size = bytes */ +/* SD_HostControllerVersion : Offset 0x0FE , size = bytes */ + +/* SDIO Host Control Register DMA Mode Definitions */ +#define SDIOH_SDMA_MODE 0 +#define SDIOH_ADMA1_MODE 1 +#define SDIOH_ADMA2_MODE 2 +#define SDIOH_ADMA2_64_MODE 3 + +#define ADMA2_ATTRIBUTE_VALID (1 << 0) /* ADMA Descriptor line valid */ +#define ADMA2_ATTRIBUTE_END (1 << 1) /* End of Descriptor */ +#define ADMA2_ATTRIBUTE_INT (1 << 2) /* Interrupt when line is done */ +#define ADMA2_ATTRIBUTE_ACT_NOP (0 << 4) /* Skip current line, go to next. */ +#define ADMA2_ATTRIBUTE_ACT_RSV (1 << 4) /* Same as NOP */ +#define ADMA1_ATTRIBUTE_ACT_SET (1 << 4) /* ADMA1 Only - set transfer length */ +#define ADMA2_ATTRIBUTE_ACT_TRAN (2 << 4) /* Transfer Data of one descriptor line. */ +#define ADMA2_ATTRIBUTE_ACT_LINK (3 << 4) /* Link Descriptor */ + +/* ADMA2 Descriptor Table Entry for 32-bit Address */ +typedef struct adma2_dscr_32b { + uint32 len_attr; + uint32 phys_addr; +} adma2_dscr_32b_t; + +/* ADMA1 Descriptor Table Entry */ +typedef struct adma1_dscr { + uint32 phys_addr_attr; +} adma1_dscr_t; + +#endif /* _SDIOH_H */ |