diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd_1363/bcmwifi_channels.c')
-rw-r--r-- | drivers/net/wireless/bcmdhd_1363/bcmwifi_channels.c | 1253 |
1 files changed, 1253 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd_1363/bcmwifi_channels.c b/drivers/net/wireless/bcmdhd_1363/bcmwifi_channels.c new file mode 100644 index 000000000000..efe7171a0d15 --- /dev/null +++ b/drivers/net/wireless/bcmdhd_1363/bcmwifi_channels.c @@ -0,0 +1,1253 @@ +/* + * Misc utility routines used by kernel or app-level. + * Contents are wifi-specific, used by any kernel or app-level + * software that might want wifi things as it grows. + * + * Copyright (C) 1999-2017, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * + * <<Broadcom-WL-IPTag/Open:>> + * + * $Id: bcmwifi_channels.c 591285 2015-10-07 11:56:29Z $ + */ + +#include <bcm_cfg.h> +#include <typedefs.h> +#include <bcmutils.h> + +#ifdef BCMDRIVER +#include <osl.h> +#define strtoul(nptr, endptr, base) bcm_strtoul((nptr), (endptr), (base)) +#define tolower(c) (bcm_isupper((c)) ? ((c) + 'a' - 'A') : (c)) +#else +#include <stdio.h> +#include <stdlib.h> +#include <ctype.h> +#ifndef ASSERT +#define ASSERT(exp) +#endif +#endif /* BCMDRIVER */ + +#include <bcmwifi_channels.h> + +#if defined(WIN32) && (defined(BCMDLL) || defined(WLMDLL)) +#include <bcmstdlib.h> /* For wl/exe/GNUmakefile.brcm_wlu and GNUmakefile.wlm_dll */ +#endif + +/* Definitions for D11AC capable Chanspec type */ + +/* Chanspec ASCII representation with 802.11ac capability: + * [<band> 'g'] <channel> ['/'<bandwidth> [<ctl-sideband>]['/'<1st80channel>'-'<2nd80channel>]] + * + * <band>: + * (optional) 2, 3, 4, 5 for 2.4GHz, 3GHz, 4GHz, and 5GHz respectively. + * Default value is 2g if channel <= 14, otherwise 5g. + * <channel>: + * channel number of the 5MHz, 10MHz, 20MHz channel, + * or primary channel of 40MHz, 80MHz, 160MHz, or 80+80MHz channel. + * <bandwidth>: + * (optional) 5, 10, 20, 40, 80, 160, or 80+80. Default value is 20. + * <primary-sideband>: + * (only for 2.4GHz band 40MHz) U for upper sideband primary, L for lower. + * + * For 2.4GHz band 40MHz channels, the same primary channel may be the + * upper sideband for one 40MHz channel, and the lower sideband for an + * overlapping 40MHz channel. The U/L disambiguates which 40MHz channel + * is being specified. + * + * For 40MHz in the 5GHz band and all channel bandwidths greater than + * 40MHz, the U/L specificaion is not allowed since the channels are + * non-overlapping and the primary sub-band is derived from its + * position in the wide bandwidth channel. + * + * <1st80Channel>: + * <2nd80Channel>: + * Required for 80+80, otherwise not allowed. + * Specifies the center channel of the first and second 80MHz band. + * + * In its simplest form, it is a 20MHz channel number, with the implied band + * of 2.4GHz if channel number <= 14, and 5GHz otherwise. + * + * To allow for backward compatibility with scripts, the old form for + * 40MHz channels is also allowed: <channel><ctl-sideband> + * + * <channel>: + * primary channel of 40MHz, channel <= 14 is 2GHz, otherwise 5GHz + * <ctl-sideband>: + * "U" for upper, "L" for lower (or lower case "u" "l") + * + * 5 GHz Examples: + * Chanspec BW Center Ch Channel Range Primary Ch + * 5g8 20MHz 8 - - + * 52 20MHz 52 - - + * 52/40 40MHz 54 52-56 52 + * 56/40 40MHz 54 52-56 56 + * 52/80 80MHz 58 52-64 52 + * 56/80 80MHz 58 52-64 56 + * 60/80 80MHz 58 52-64 60 + * 64/80 80MHz 58 52-64 64 + * 52/160 160MHz 50 36-64 52 + * 36/160 160MGz 50 36-64 36 + * 36/80+80/42-106 80+80MHz 42,106 36-48,100-112 36 + * + * 2 GHz Examples: + * Chanspec BW Center Ch Channel Range Primary Ch + * 2g8 20MHz 8 - - + * 8 20MHz 8 - - + * 6 20MHz 6 - - + * 6/40l 40MHz 8 6-10 6 + * 6l 40MHz 8 6-10 6 + * 6/40u 40MHz 4 2-6 6 + * 6u 40MHz 4 2-6 6 + */ + +/* bandwidth ASCII string */ +static const char *wf_chspec_bw_str[] = +{ + "5", + "10", + "20", + "40", + "80", + "160", + "80+80", +#ifdef WL11ULB + "2.5" +#else /* WL11ULB */ + "na" +#endif /* WL11ULB */ +}; + +static const uint8 wf_chspec_bw_mhz[] = +{5, 10, 20, 40, 80, 160, 160}; + +#define WF_NUM_BW \ + (sizeof(wf_chspec_bw_mhz)/sizeof(uint8)) + +/* 40MHz channels in 5GHz band */ +static const uint8 wf_5g_40m_chans[] = +{38, 46, 54, 62, 102, 110, 118, 126, 134, 142, 151, 159}; +#define WF_NUM_5G_40M_CHANS \ + (sizeof(wf_5g_40m_chans)/sizeof(uint8)) + +/* 80MHz channels in 5GHz band */ +static const uint8 wf_5g_80m_chans[] = +{42, 58, 106, 122, 138, 155}; +#define WF_NUM_5G_80M_CHANS \ + (sizeof(wf_5g_80m_chans)/sizeof(uint8)) + +/* 160MHz channels in 5GHz band */ +static const uint8 wf_5g_160m_chans[] = +{50, 114}; +#define WF_NUM_5G_160M_CHANS \ + (sizeof(wf_5g_160m_chans)/sizeof(uint8)) + + +/* convert bandwidth from chanspec to MHz */ +static uint +bw_chspec_to_mhz(chanspec_t chspec) +{ + uint bw; + + bw = (chspec & WL_CHANSPEC_BW_MASK) >> WL_CHANSPEC_BW_SHIFT; + return (bw >= WF_NUM_BW ? 0 : wf_chspec_bw_mhz[bw]); +} + +/* bw in MHz, return the channel count from the center channel to the + * the channel at the edge of the band + */ +static uint8 +center_chan_to_edge(uint bw) +{ + /* edge channels separated by BW - 10MHz on each side + * delta from cf to edge is half of that, + * MHz to channel num conversion is 5MHz/channel + */ + return (uint8)(((bw - 20) / 2) / 5); +} + +/* return channel number of the low edge of the band + * given the center channel and BW + */ +static uint8 +channel_low_edge(uint center_ch, uint bw) +{ + return (uint8)(center_ch - center_chan_to_edge(bw)); +} + +/* return side band number given center channel and control channel + * return -1 on error + */ +static int +channel_to_sb(uint center_ch, uint ctl_ch, uint bw) +{ + uint lowest = channel_low_edge(center_ch, bw); + uint sb; + + if ((ctl_ch - lowest) % 4) { + /* bad ctl channel, not mult 4 */ + return -1; + } + + sb = ((ctl_ch - lowest) / 4); + + /* sb must be a index to a 20MHz channel in range */ + if (sb >= (bw / 20)) { + /* ctl_ch must have been too high for the center_ch */ + return -1; + } + + return sb; +} + +/* return control channel given center channel and side band */ +static uint8 +channel_to_ctl_chan(uint center_ch, uint bw, uint sb) +{ + return (uint8)(channel_low_edge(center_ch, bw) + sb * 4); +} + +/* return index of 80MHz channel from channel number + * return -1 on error + */ +static int +channel_80mhz_to_id(uint ch) +{ + uint i; + for (i = 0; i < WF_NUM_5G_80M_CHANS; i ++) { + if (ch == wf_5g_80m_chans[i]) + return i; + } + + return -1; +} + +/* wrapper function for wf_chspec_ntoa. In case of an error it puts + * the original chanspec in the output buffer, prepended with "invalid". + * Can be directly used in print routines as it takes care of null + */ +char * +wf_chspec_ntoa_ex(chanspec_t chspec, char *buf) +{ + if (wf_chspec_ntoa(chspec, buf) == NULL) + snprintf(buf, CHANSPEC_STR_LEN, "invalid 0x%04x", chspec); + return buf; +} + +/* given a chanspec and a string buffer, format the chanspec as a + * string, and return the original pointer a. + * Min buffer length must be CHANSPEC_STR_LEN. + * On error return NULL + */ +char * +wf_chspec_ntoa(chanspec_t chspec, char *buf) +{ + const char *band; + uint ctl_chan; + + if (wf_chspec_malformed(chspec)) + return NULL; + + band = ""; + + /* check for non-default band spec */ + if ((CHSPEC_IS2G(chspec) && CHSPEC_CHANNEL(chspec) > CH_MAX_2G_CHANNEL) || + (CHSPEC_IS5G(chspec) && CHSPEC_CHANNEL(chspec) <= CH_MAX_2G_CHANNEL)) + band = (CHSPEC_IS2G(chspec)) ? "2g" : "5g"; + + /* ctl channel */ + ctl_chan = wf_chspec_ctlchan(chspec); + + /* bandwidth and ctl sideband */ + if (CHSPEC_IS20(chspec)) { + snprintf(buf, CHANSPEC_STR_LEN, "%s%d", band, ctl_chan); + } else if (!CHSPEC_IS8080(chspec)) { + const char *bw; + const char *sb = ""; + + bw = wf_chspec_bw_str[(chspec & WL_CHANSPEC_BW_MASK) >> WL_CHANSPEC_BW_SHIFT]; + +#ifdef CHANSPEC_NEW_40MHZ_FORMAT + /* ctl sideband string if needed for 2g 40MHz */ + if (CHSPEC_IS40(chspec) && CHSPEC_IS2G(chspec)) { + sb = CHSPEC_SB_UPPER(chspec) ? "u" : "l"; + } + + snprintf(buf, CHANSPEC_STR_LEN, "%s%d/%s%s", band, ctl_chan, bw, sb); +#else + /* ctl sideband string instead of BW for 40MHz */ + if (CHSPEC_IS40(chspec)) { + sb = CHSPEC_SB_UPPER(chspec) ? "u" : "l"; + snprintf(buf, CHANSPEC_STR_LEN, "%s%d%s", band, ctl_chan, sb); + } else { + snprintf(buf, CHANSPEC_STR_LEN, "%s%d/%s", band, ctl_chan, bw); + } +#endif /* CHANSPEC_NEW_40MHZ_FORMAT */ + + } else { + /* 80+80 */ + uint chan1 = (chspec & WL_CHANSPEC_CHAN1_MASK) >> WL_CHANSPEC_CHAN1_SHIFT; + uint chan2 = (chspec & WL_CHANSPEC_CHAN2_MASK) >> WL_CHANSPEC_CHAN2_SHIFT; + + /* convert to channel number */ + chan1 = (chan1 < WF_NUM_5G_80M_CHANS) ? wf_5g_80m_chans[chan1] : 0; + chan2 = (chan2 < WF_NUM_5G_80M_CHANS) ? wf_5g_80m_chans[chan2] : 0; + + /* Outputs a max of CHANSPEC_STR_LEN chars including '\0' */ + snprintf(buf, CHANSPEC_STR_LEN, "%d/80+80/%d-%d", ctl_chan, chan1, chan2); + } + + return (buf); +} + +static int +read_uint(const char **p, unsigned int *num) +{ + unsigned long val; + char *endp = NULL; + + val = strtoul(*p, &endp, 10); + /* if endp is the initial pointer value, then a number was not read */ + if (endp == *p) + return 0; + + /* advance the buffer pointer to the end of the integer string */ + *p = endp; + /* return the parsed integer */ + *num = (unsigned int)val; + + return 1; +} + +/* given a chanspec string, convert to a chanspec. + * On error return 0 + */ +chanspec_t +wf_chspec_aton(const char *a) +{ + chanspec_t chspec; + uint chspec_ch, chspec_band, bw, chspec_bw, chspec_sb; + uint num, ctl_ch; + uint ch1, ch2; + char c, sb_ul = '\0'; + int i; + + bw = 20; + chspec_sb = 0; + chspec_ch = ch1 = ch2 = 0; + + /* parse channel num or band */ + if (!read_uint(&a, &num)) + return 0; + /* if we are looking at a 'g', then the first number was a band */ + c = tolower((int)a[0]); + if (c == 'g') { + a++; /* consume the char */ + + /* band must be "2" or "5" */ + if (num == 2) + chspec_band = WL_CHANSPEC_BAND_2G; + else if (num == 5) + chspec_band = WL_CHANSPEC_BAND_5G; + else + return 0; + + /* read the channel number */ + if (!read_uint(&a, &ctl_ch)) + return 0; + + c = tolower((int)a[0]); + } + else { + /* first number is channel, use default for band */ + ctl_ch = num; + chspec_band = ((ctl_ch <= CH_MAX_2G_CHANNEL) ? + WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G); + } + + if (c == '\0') { + /* default BW of 20MHz */ + chspec_bw = WL_CHANSPEC_BW_20; + goto done_read; + } + + a ++; /* consume the 'u','l', or '/' */ + + /* check 'u'/'l' */ + if (c == 'u' || c == 'l') { + sb_ul = c; + chspec_bw = WL_CHANSPEC_BW_40; + goto done_read; + } + + /* next letter must be '/' */ + if (c != '/') + return 0; + + /* read bandwidth */ + if (!read_uint(&a, &bw)) + return 0; + + /* convert to chspec value */ + if (bw == 2) { + chspec_bw = WL_CHANSPEC_BW_2P5; + } else if (bw == 5) { + chspec_bw = WL_CHANSPEC_BW_5; + } else if (bw == 10) { + chspec_bw = WL_CHANSPEC_BW_10; + } else if (bw == 20) { + chspec_bw = WL_CHANSPEC_BW_20; + } else if (bw == 40) { + chspec_bw = WL_CHANSPEC_BW_40; + } else if (bw == 80) { + chspec_bw = WL_CHANSPEC_BW_80; + } else if (bw == 160) { + chspec_bw = WL_CHANSPEC_BW_160; + } else { + return 0; + } + + /* So far we have <band>g<chan>/<bw> + * Can now be followed by u/l if bw = 40, + * or '+80' if bw = 80, to make '80+80' bw, + * or '.5' if bw = 2.5 to make '2.5' bw . + */ + + c = tolower((int)a[0]); + + /* if we have a 2g/40 channel, we should have a l/u spec now */ + if (chspec_band == WL_CHANSPEC_BAND_2G && bw == 40) { + if (c == 'u' || c == 'l') { + a ++; /* consume the u/l char */ + sb_ul = c; + goto done_read; + } + } + + /* check for 80+80 */ + if (c == '+') { + /* 80+80 */ + const char plus80[] = "80/"; + + /* must be looking at '+80/' + * check and consume this string. + */ + chspec_bw = WL_CHANSPEC_BW_8080; + + a ++; /* consume the char '+' */ + + /* consume the '80/' string */ + for (i = 0; i < 3; i++) { + if (*a++ != plus80[i]) { + return 0; + } + } + + /* read primary 80MHz channel */ + if (!read_uint(&a, &ch1)) + return 0; + + /* must followed by '-' */ + if (a[0] != '-') + return 0; + a ++; /* consume the char */ + + /* read secondary 80MHz channel */ + if (!read_uint(&a, &ch2)) + return 0; + } else if (c == '.') { + /* 2.5 */ + /* must be looking at '.5' + * check and consume this string. + */ + chspec_bw = WL_CHANSPEC_BW_2P5; + + a ++; /* consume the char '.' */ + + /* consume the '5' string */ + if (*a++ != '5') { + return 0; + } + } + +done_read: + /* skip trailing white space */ + while (a[0] == ' ') { + a ++; + } + + /* must be end of string */ + if (a[0] != '\0') + return 0; + + /* Now have all the chanspec string parts read; + * chspec_band, ctl_ch, chspec_bw, sb_ul, ch1, ch2. + * chspec_band and chspec_bw are chanspec values. + * Need to convert ctl_ch, sb_ul, and ch1,ch2 into + * a center channel (or two) and sideband. + */ + + /* if a sb u/l string was given, just use that, + * guaranteed to be bw = 40 by sting parse. + */ + if (sb_ul != '\0') { + if (sb_ul == 'l') { + chspec_ch = UPPER_20_SB(ctl_ch); + chspec_sb = WL_CHANSPEC_CTL_SB_LLL; + } else if (sb_ul == 'u') { + chspec_ch = LOWER_20_SB(ctl_ch); + chspec_sb = WL_CHANSPEC_CTL_SB_LLU; + } + } + /* if the bw is 20, center and sideband are trivial */ + else if (BW_LE20(chspec_bw)) { + chspec_ch = ctl_ch; + chspec_sb = WL_CHANSPEC_CTL_SB_NONE; + } + /* if the bw is 40/80/160, not 80+80, a single method + * can be used to to find the center and sideband + */ + else if (chspec_bw != WL_CHANSPEC_BW_8080) { + /* figure out ctl sideband based on ctl channel and bandwidth */ + const uint8 *center_ch = NULL; + int num_ch = 0; + int sb = -1; + + if (chspec_bw == WL_CHANSPEC_BW_40) { + center_ch = wf_5g_40m_chans; + num_ch = WF_NUM_5G_40M_CHANS; + } else if (chspec_bw == WL_CHANSPEC_BW_80) { + center_ch = wf_5g_80m_chans; + num_ch = WF_NUM_5G_80M_CHANS; + } else if (chspec_bw == WL_CHANSPEC_BW_160) { + center_ch = wf_5g_160m_chans; + num_ch = WF_NUM_5G_160M_CHANS; + } else { + return 0; + } + + for (i = 0; i < num_ch; i ++) { + sb = channel_to_sb(center_ch[i], ctl_ch, bw); + if (sb >= 0) { + chspec_ch = center_ch[i]; + chspec_sb = sb << WL_CHANSPEC_CTL_SB_SHIFT; + break; + } + } + + /* check for no matching sb/center */ + if (sb < 0) { + return 0; + } + } + /* Otherwise, bw is 80+80. Figure out channel pair and sb */ + else { + int ch1_id = 0, ch2_id = 0; + int sb; + + /* look up the channel ID for the specified channel numbers */ + ch1_id = channel_80mhz_to_id(ch1); + ch2_id = channel_80mhz_to_id(ch2); + + /* validate channels */ + if (ch1_id < 0 || ch2_id < 0) + return 0; + + /* combine 2 channel IDs in channel field of chspec */ + chspec_ch = (((uint)ch1_id << WL_CHANSPEC_CHAN1_SHIFT) | + ((uint)ch2_id << WL_CHANSPEC_CHAN2_SHIFT)); + + /* figure out primary 20 MHz sideband */ + + /* is the primary channel contained in the 1st 80MHz channel? */ + sb = channel_to_sb(ch1, ctl_ch, bw); + if (sb < 0) { + /* no match for primary channel 'ctl_ch' in segment0 80MHz channel */ + return 0; + } + + chspec_sb = sb << WL_CHANSPEC_CTL_SB_SHIFT; + } + + chspec = (chspec_ch | chspec_band | chspec_bw | chspec_sb); + + if (wf_chspec_malformed(chspec)) + return 0; + + return chspec; +} + +/* + * Verify the chanspec is using a legal set of parameters, i.e. that the + * chanspec specified a band, bw, ctl_sb and channel and that the + * combination could be legal given any set of circumstances. + * RETURNS: TRUE is the chanspec is malformed, false if it looks good. + */ +bool +wf_chspec_malformed(chanspec_t chanspec) +{ + uint chspec_bw = CHSPEC_BW(chanspec); + uint chspec_ch = CHSPEC_CHANNEL(chanspec); + + /* must be 2G or 5G band */ + if (CHSPEC_IS2G(chanspec)) { + /* must be valid bandwidth */ + if (!BW_LE40(chspec_bw)) { + return TRUE; + } + } else if (CHSPEC_IS5G(chanspec)) { + if (chspec_bw == WL_CHANSPEC_BW_8080) { + uint ch1_id, ch2_id; + + /* channel IDs in 80+80 must be in range */ + ch1_id = CHSPEC_CHAN1(chanspec); + ch2_id = CHSPEC_CHAN2(chanspec); + if (ch1_id >= WF_NUM_5G_80M_CHANS || ch2_id >= WF_NUM_5G_80M_CHANS) + return TRUE; + + } else if (BW_LE160(chspec_bw)) { + if (chspec_ch > MAXCHANNEL) { + return TRUE; + } + } else { + /* invalid bandwidth */ + return TRUE; + } + } else { + /* must be 2G or 5G band */ + return TRUE; + } + + /* side band needs to be consistent with bandwidth */ + if (BW_LE20(chspec_bw)) { + if (CHSPEC_CTL_SB(chanspec) != WL_CHANSPEC_CTL_SB_LLL) + return TRUE; + } else if (chspec_bw == WL_CHANSPEC_BW_40) { + if (CHSPEC_CTL_SB(chanspec) > WL_CHANSPEC_CTL_SB_LLU) + return TRUE; + } else if (chspec_bw == WL_CHANSPEC_BW_80 || + chspec_bw == WL_CHANSPEC_BW_8080) { + if (CHSPEC_CTL_SB(chanspec) > WL_CHANSPEC_CTL_SB_LUU) + return TRUE; + } + else if (chspec_bw == WL_CHANSPEC_BW_160) { + ASSERT(CHSPEC_CTL_SB(chanspec) <= WL_CHANSPEC_CTL_SB_UUU); + } + return FALSE; +} + +/* + * Verify the chanspec specifies a valid channel according to 802.11. + * RETURNS: TRUE if the chanspec is a valid 802.11 channel + */ +bool +wf_chspec_valid(chanspec_t chanspec) +{ + uint chspec_bw = CHSPEC_BW(chanspec); + uint chspec_ch = CHSPEC_CHANNEL(chanspec); + + if (wf_chspec_malformed(chanspec)) + return FALSE; + + if (CHSPEC_IS2G(chanspec)) { + /* must be valid bandwidth and channel range */ + if (BW_LE20(chspec_bw)) { + if (chspec_ch >= 1 && chspec_ch <= 14) + return TRUE; + } else if (chspec_bw == WL_CHANSPEC_BW_40) { + if (chspec_ch >= 3 && chspec_ch <= 11) + return TRUE; + } + } else if (CHSPEC_IS5G(chanspec)) { + if (chspec_bw == WL_CHANSPEC_BW_8080) { + uint16 ch1, ch2; + + ch1 = wf_5g_80m_chans[CHSPEC_CHAN1(chanspec)]; + ch2 = wf_5g_80m_chans[CHSPEC_CHAN2(chanspec)]; + + /* the two channels must be separated by more than 80MHz by VHT req */ + if ((ch2 > ch1 + CH_80MHZ_APART) || + (ch1 > ch2 + CH_80MHZ_APART)) + return TRUE; + } else { + const uint8 *center_ch; + uint num_ch, i; + + if (BW_LE40(chspec_bw)) { + center_ch = wf_5g_40m_chans; + num_ch = WF_NUM_5G_40M_CHANS; + } else if (chspec_bw == WL_CHANSPEC_BW_80) { + center_ch = wf_5g_80m_chans; + num_ch = WF_NUM_5G_80M_CHANS; + } else if (chspec_bw == WL_CHANSPEC_BW_160) { + center_ch = wf_5g_160m_chans; + num_ch = WF_NUM_5G_160M_CHANS; + } else { + /* invalid bandwidth */ + return FALSE; + } + + /* check for a valid center channel */ + if (BW_LE20(chspec_bw)) { + /* We don't have an array of legal 20MHz 5G channels, but they are + * each side of the legal 40MHz channels. Check the chanspec + * channel against either side of the 40MHz channels. + */ + for (i = 0; i < num_ch; i ++) { + if (chspec_ch == (uint)LOWER_20_SB(center_ch[i]) || + chspec_ch == (uint)UPPER_20_SB(center_ch[i])) + break; /* match found */ + } + + if (i == num_ch) { + /* check for channel 165 which is not the side band + * of 40MHz 5G channel + */ + if (chspec_ch == 165) + i = 0; + + /* check for legacy JP channels on failure */ + if (chspec_ch == 34 || chspec_ch == 38 || + chspec_ch == 42 || chspec_ch == 46) + i = 0; + } + } else { + /* check the chanspec channel to each legal channel */ + for (i = 0; i < num_ch; i ++) { + if (chspec_ch == center_ch[i]) + break; /* match found */ + } + } + + if (i < num_ch) { + /* match found */ + return TRUE; + } + } + } + + return FALSE; +} + +/* + * This function returns the channel number that control traffic is being sent on, for 20MHz + * channels this is just the channel number, for 40MHZ, 80MHz, 160MHz channels it is the 20MHZ + * sideband depending on the chanspec selected + */ +uint8 +wf_chspec_ctlchan(chanspec_t chspec) +{ + uint center_chan; + uint bw_mhz; + uint sb; + + ASSERT(!wf_chspec_malformed(chspec)); + + /* Is there a sideband ? */ + if (CHSPEC_BW_LE20(chspec)) { + return CHSPEC_CHANNEL(chspec); + } else { + sb = CHSPEC_CTL_SB(chspec) >> WL_CHANSPEC_CTL_SB_SHIFT; + + if (CHSPEC_IS8080(chspec)) { + /* For an 80+80 MHz channel, the sideband 'sb' field is an 80 MHz sideband + * (LL, LU, UL, LU) for the 80 MHz frequency segment 0. + */ + uint chan_id = CHSPEC_CHAN1(chspec); + + bw_mhz = 80; + + /* convert from channel index to channel number */ + center_chan = wf_5g_80m_chans[chan_id]; + } + else { + bw_mhz = bw_chspec_to_mhz(chspec); + center_chan = CHSPEC_CHANNEL(chspec) >> WL_CHANSPEC_CHAN_SHIFT; + } + + return (channel_to_ctl_chan(center_chan, bw_mhz, sb)); + } +} + +/* given a chanspec, return the bandwidth string */ +char * +wf_chspec_to_bw_str(chanspec_t chspec) +{ + return (char *)wf_chspec_bw_str[(CHSPEC_BW(chspec) >> WL_CHANSPEC_BW_SHIFT)]; +} + +/* + * This function returns the chanspec of the control channel of a given chanspec + */ +chanspec_t +wf_chspec_ctlchspec(chanspec_t chspec) +{ + chanspec_t ctl_chspec = chspec; + uint8 ctl_chan; + + ASSERT(!wf_chspec_malformed(chspec)); + + /* Is there a sideband ? */ + if (!CHSPEC_BW_LE20(chspec)) { + ctl_chan = wf_chspec_ctlchan(chspec); + ctl_chspec = ctl_chan | WL_CHANSPEC_BW_20; + ctl_chspec |= CHSPEC_BAND(chspec); + } + return ctl_chspec; +} + +/* return chanspec given control channel and bandwidth + * return 0 on error + */ +uint16 +wf_channel2chspec(uint ctl_ch, uint bw) +{ + uint16 chspec; + const uint8 *center_ch = NULL; + int num_ch = 0; + int sb = -1; + int i = 0; + + chspec = ((ctl_ch <= CH_MAX_2G_CHANNEL) ? WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G); + + chspec |= bw; + + if (bw == WL_CHANSPEC_BW_40) { + center_ch = wf_5g_40m_chans; + num_ch = WF_NUM_5G_40M_CHANS; + bw = 40; + } else if (bw == WL_CHANSPEC_BW_80) { + center_ch = wf_5g_80m_chans; + num_ch = WF_NUM_5G_80M_CHANS; + bw = 80; + } else if (bw == WL_CHANSPEC_BW_160) { + center_ch = wf_5g_160m_chans; + num_ch = WF_NUM_5G_160M_CHANS; + bw = 160; + } else if (BW_LE20(bw)) { + chspec |= ctl_ch; + return chspec; + } else { + return 0; + } + + for (i = 0; i < num_ch; i ++) { + sb = channel_to_sb(center_ch[i], ctl_ch, bw); + if (sb >= 0) { + chspec |= center_ch[i]; + chspec |= (sb << WL_CHANSPEC_CTL_SB_SHIFT); + break; + } + } + + /* check for no matching sb/center */ + if (sb < 0) { + return 0; + } + + return chspec; +} + +/* + * This function returns the chanspec for the primary 40MHz of an 80MHz channel. + * The control sideband specifies the same 20MHz channel that the 80MHz channel is using + * as the primary 20MHz channel. + */ +extern chanspec_t wf_chspec_primary40_chspec(chanspec_t chspec) +{ + chanspec_t chspec40 = chspec; + uint center_chan; + uint sb; + + ASSERT(!wf_chspec_malformed(chspec)); + + /* if the chanspec is > 80MHz, use the helper routine to find the primary 80 MHz channel */ + if (CHSPEC_IS8080(chspec) || CHSPEC_IS160(chspec)) { + chspec = wf_chspec_primary80_chspec(chspec); + } + + /* determine primary 40 MHz sub-channel of an 80 MHz chanspec */ + if (CHSPEC_IS80(chspec)) { + center_chan = CHSPEC_CHANNEL(chspec); + sb = CHSPEC_CTL_SB(chspec); + + if (sb < WL_CHANSPEC_CTL_SB_UL) { + /* Primary 40MHz is on lower side */ + center_chan -= CH_20MHZ_APART; + /* sideband bits are the same for LL/LU and L/U */ + } else { + /* Primary 40MHz is on upper side */ + center_chan += CH_20MHZ_APART; + /* sideband bits need to be adjusted by UL offset */ + sb -= WL_CHANSPEC_CTL_SB_UL; + } + + /* Create primary 40MHz chanspec */ + chspec40 = (WL_CHANSPEC_BAND_5G | WL_CHANSPEC_BW_40 | + sb | center_chan); + } + + return chspec40; +} + +/* + * Return the channel number for a given frequency and base frequency. + * The returned channel number is relative to the given base frequency. + * If the given base frequency is zero, a base frequency of 5 GHz is assumed for + * frequencies from 5 - 6 GHz, and 2.407 GHz is assumed for 2.4 - 2.5 GHz. + * + * Frequency is specified in MHz. + * The base frequency is specified as (start_factor * 500 kHz). + * Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_5_G are defined for + * 2.4 GHz and 5 GHz bands. + * + * The returned channel will be in the range [1, 14] in the 2.4 GHz band + * and [0, 200] otherwise. + * -1 is returned if the start_factor is WF_CHAN_FACTOR_2_4_G and the + * frequency is not a 2.4 GHz channel, or if the frequency is not and even + * multiple of 5 MHz from the base frequency to the base plus 1 GHz. + * + * Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2 + */ +int +wf_mhz2channel(uint freq, uint start_factor) +{ + int ch = -1; + uint base; + int offset; + + /* take the default channel start frequency */ + if (start_factor == 0) { + if (freq >= 2400 && freq <= 2500) + start_factor = WF_CHAN_FACTOR_2_4_G; + else if (freq >= 5000 && freq <= 6000) + start_factor = WF_CHAN_FACTOR_5_G; + } + + if (freq == 2484 && start_factor == WF_CHAN_FACTOR_2_4_G) + return 14; + + base = start_factor / 2; + + /* check that the frequency is in 1GHz range of the base */ + if ((freq < base) || (freq > base + 1000)) + return -1; + + offset = freq - base; + ch = offset / 5; + + /* check that frequency is a 5MHz multiple from the base */ + if (offset != (ch * 5)) + return -1; + + /* restricted channel range check for 2.4G */ + if (start_factor == WF_CHAN_FACTOR_2_4_G && (ch < 1 || ch > 13)) + return -1; + + return ch; +} + +/* + * Return the center frequency in MHz of the given channel and base frequency. + * The channel number is interpreted relative to the given base frequency. + * + * The valid channel range is [1, 14] in the 2.4 GHz band and [0, 200] otherwise. + * The base frequency is specified as (start_factor * 500 kHz). + * Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_4_G, and WF_CHAN_FACTOR_5_G + * are defined for 2.4 GHz, 4 GHz, and 5 GHz bands. + * The channel range of [1, 14] is only checked for a start_factor of + * WF_CHAN_FACTOR_2_4_G (4814 = 2407 * 2). + * Odd start_factors produce channels on .5 MHz boundaries, in which case + * the answer is rounded down to an integral MHz. + * -1 is returned for an out of range channel. + * + * Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2 + */ +int +wf_channel2mhz(uint ch, uint start_factor) +{ + int freq; + + if ((start_factor == WF_CHAN_FACTOR_2_4_G && (ch < 1 || ch > 14)) || + (ch > 200)) + freq = -1; + else if ((start_factor == WF_CHAN_FACTOR_2_4_G) && (ch == 14)) + freq = 2484; + else + freq = ch * 5 + start_factor / 2; + + return freq; +} + +static const uint16 sidebands[] = { + WL_CHANSPEC_CTL_SB_LLL, WL_CHANSPEC_CTL_SB_LLU, + WL_CHANSPEC_CTL_SB_LUL, WL_CHANSPEC_CTL_SB_LUU, + WL_CHANSPEC_CTL_SB_ULL, WL_CHANSPEC_CTL_SB_ULU, + WL_CHANSPEC_CTL_SB_UUL, WL_CHANSPEC_CTL_SB_UUU +}; + +/* + * Returns the chanspec 80Mhz channel corresponding to the following input + * parameters + * + * primary_channel - primary 20Mhz channel + * center_channel - center frequecny of the 80Mhz channel + * + * The center_channel can be one of {42, 58, 106, 122, 138, 155} + * + * returns INVCHANSPEC in case of error + */ +chanspec_t +wf_chspec_80(uint8 center_channel, uint8 primary_channel) +{ + + chanspec_t chanspec = INVCHANSPEC; + chanspec_t chanspec_cur; + uint i; + + for (i = 0; i < WF_NUM_SIDEBANDS_80MHZ; i++) { + chanspec_cur = CH80MHZ_CHSPEC(center_channel, sidebands[i]); + if (primary_channel == wf_chspec_ctlchan(chanspec_cur)) { + chanspec = chanspec_cur; + break; + } + } + /* If the loop ended early, we are good, otherwise we did not + * find a 80MHz chanspec with the given center_channel that had a primary channel + *matching the given primary_channel. + */ + return chanspec; +} + +/* + * Returns the 80+80 chanspec corresponding to the following input parameters + * + * primary_20mhz - Primary 20 MHz channel + * chan0 - center channel number of one frequency segment + * chan1 - center channel number of the other frequency segment + * + * Parameters chan0 and chan1 are channel numbers in {42, 58, 106, 122, 138, 155}. + * The primary channel must be contained in one of the 80MHz channels. This routine + * will determine which frequency segment is the primary 80 MHz segment. + * + * Returns INVCHANSPEC in case of error. + * + * Refer to IEEE802.11ac section 22.3.14 "Channelization". + */ +chanspec_t +wf_chspec_get8080_chspec(uint8 primary_20mhz, uint8 chan0, uint8 chan1) +{ + int sb = 0; + uint16 chanspec = 0; + int chan0_id = 0, chan1_id = 0; + int seg0, seg1; + + chan0_id = channel_80mhz_to_id(chan0); + chan1_id = channel_80mhz_to_id(chan1); + + /* make sure the channel numbers were valid */ + if (chan0_id == -1 || chan1_id == -1) + return INVCHANSPEC; + + /* does the primary channel fit with the 1st 80MHz channel ? */ + sb = channel_to_sb(chan0, primary_20mhz, 80); + if (sb >= 0) { + /* yes, so chan0 is frequency segment 0, and chan1 is seg 1 */ + seg0 = chan0_id; + seg1 = chan1_id; + } else { + /* no, so does the primary channel fit with the 2nd 80MHz channel ? */ + sb = channel_to_sb(chan1, primary_20mhz, 80); + if (sb < 0) { + /* no match for ctl_ch to either 80MHz center channel */ + return INVCHANSPEC; + } + /* swapped, so chan1 is frequency segment 0, and chan0 is seg 1 */ + seg0 = chan1_id; + seg1 = chan0_id; + } + + chanspec = ((seg0 << WL_CHANSPEC_CHAN1_SHIFT) | + (seg1 << WL_CHANSPEC_CHAN2_SHIFT) | + (sb << WL_CHANSPEC_CTL_SB_SHIFT) | + WL_CHANSPEC_BW_8080 | + WL_CHANSPEC_BAND_5G); + + return chanspec; +} + +/* + * This function returns the 80Mhz channel for the given id. + */ +static uint8 +wf_chspec_get80Mhz_ch(uint8 chan_80Mhz_id) +{ + if (chan_80Mhz_id < WF_NUM_5G_80M_CHANS) + return wf_5g_80m_chans[chan_80Mhz_id]; + + return 0; +} + +/* + * Returns the primary 80 Mhz channel for the provided chanspec + * + * chanspec - Input chanspec for which the 80MHz primary channel has to be retrieved + * + * returns -1 in case the provided channel is 20/40 Mhz chanspec + */ + +uint8 +wf_chspec_primary80_channel(chanspec_t chanspec) +{ + uint8 primary80_chan; + + if (CHSPEC_IS80(chanspec)) { + primary80_chan = CHSPEC_CHANNEL(chanspec); + } + else if (CHSPEC_IS8080(chanspec)) { + /* Channel ID 1 corresponds to frequency segment 0, the primary 80 MHz segment */ + primary80_chan = wf_chspec_get80Mhz_ch(CHSPEC_CHAN1(chanspec)); + } + else if (CHSPEC_IS160(chanspec)) { + uint8 center_chan = CHSPEC_CHANNEL(chanspec); + uint sb = CHSPEC_CTL_SB(chanspec) >> WL_CHANSPEC_CTL_SB_SHIFT; + + /* based on the sb value primary 80 channel can be retrieved + * if sb is in range 0 to 3 the lower band is the 80Mhz primary band + */ + if (sb < 4) { + primary80_chan = center_chan - CH_40MHZ_APART; + } + /* if sb is in range 4 to 7 the upper band is the 80Mhz primary band */ + else + { + primary80_chan = center_chan + CH_40MHZ_APART; + } + } + else { + /* for 20 and 40 Mhz */ + primary80_chan = -1; + } + return primary80_chan; +} + +/* + * Returns the secondary 80 Mhz channel for the provided chanspec + * + * chanspec - Input chanspec for which the 80MHz secondary channel has to be retrieved + * + * returns -1 in case the provided channel is 20/40/80 Mhz chanspec + */ +uint8 +wf_chspec_secondary80_channel(chanspec_t chanspec) +{ + uint8 secondary80_chan; + + if (CHSPEC_IS8080(chanspec)) { + secondary80_chan = wf_chspec_get80Mhz_ch(CHSPEC_CHAN2(chanspec)); + } + else if (CHSPEC_IS160(chanspec)) { + uint8 center_chan = CHSPEC_CHANNEL(chanspec); + uint sb = CHSPEC_CTL_SB(chanspec) >> WL_CHANSPEC_CTL_SB_SHIFT; + + /* based on the sb value secondary 80 channel can be retrieved + * if sb is in range 0 to 3 upper band is the secondary 80Mhz band + */ + if (sb < 4) { + secondary80_chan = center_chan + CH_40MHZ_APART; + } + /* if sb is in range 4 to 7 the lower band is the secondary 80Mhz band */ + else + { + secondary80_chan = center_chan - CH_40MHZ_APART; + } + } + else { + /* for 20, 40, and 80 Mhz */ + secondary80_chan = -1; + } + return secondary80_chan; +} + +/* + * This function returns the chanspec for the primary 80MHz of an 160MHz or 80+80 channel. + * + * chanspec - Input chanspec for which the primary 80Mhz chanspec has to be retreived + * + * returns the input chanspec in case the provided chanspec is an 80 MHz chanspec + * returns INVCHANSPEC in case the provided channel is 20/40 MHz chanspec + */ +chanspec_t +wf_chspec_primary80_chspec(chanspec_t chspec) +{ + chanspec_t chspec80; + uint center_chan; + uint sb; + + ASSERT(!wf_chspec_malformed(chspec)); + if (CHSPEC_IS80(chspec)) { + chspec80 = chspec; + } + else if (CHSPEC_IS8080(chspec)) { + + /* Channel ID 1 corresponds to frequency segment 0, the primary 80 MHz segment */ + center_chan = wf_chspec_get80Mhz_ch(CHSPEC_CHAN1(chspec)); + + sb = CHSPEC_CTL_SB(chspec); + + /* Create primary 80MHz chanspec */ + chspec80 = (WL_CHANSPEC_BAND_5G | WL_CHANSPEC_BW_80 | sb | center_chan); + } + else if (CHSPEC_IS160(chspec)) { + center_chan = CHSPEC_CHANNEL(chspec); + sb = CHSPEC_CTL_SB(chspec); + + if (sb < WL_CHANSPEC_CTL_SB_ULL) { + /* Primary 80MHz is on lower side */ + center_chan -= CH_40MHZ_APART; + } + else { + /* Primary 80MHz is on upper side */ + center_chan += CH_40MHZ_APART; + sb -= WL_CHANSPEC_CTL_SB_ULL; + } + /* Create primary 80MHz chanspec */ + chspec80 = (WL_CHANSPEC_BAND_5G | WL_CHANSPEC_BW_80 | sb | center_chan); + } + else { + chspec80 = INVCHANSPEC; + } + + return chspec80; +} + +#ifdef WL11AC_80P80 +uint8 +wf_chspec_channel(chanspec_t chspec) +{ + if (CHSPEC_IS8080(chspec)) { + return wf_chspec_primary80_channel(chspec); + } + else { + return ((uint8)((chspec) & WL_CHANSPEC_CHAN_MASK)); + } +} +#endif /* WL11AC_80P80 */ |