diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd_1363/include/sbconfig.h')
-rw-r--r-- | drivers/net/wireless/bcmdhd_1363/include/sbconfig.h | 285 |
1 files changed, 285 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd_1363/include/sbconfig.h b/drivers/net/wireless/bcmdhd_1363/include/sbconfig.h new file mode 100644 index 000000000000..ad9c408cd344 --- /dev/null +++ b/drivers/net/wireless/bcmdhd_1363/include/sbconfig.h @@ -0,0 +1,285 @@ +/* + * Broadcom SiliconBackplane hardware register definitions. + * + * Copyright (C) 1999-2017, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * + * <<Broadcom-WL-IPTag/Open:>> + * + * $Id: sbconfig.h 530150 2015-01-29 08:43:40Z $ + */ + +#ifndef _SBCONFIG_H +#define _SBCONFIG_H + +/* cpp contortions to concatenate w/arg prescan */ +#ifndef PAD +#define _PADLINE(line) pad ## line +#define _XSTR(line) _PADLINE(line) +#define PAD _XSTR(__LINE__) +#endif + +/* enumeration in SB is based on the premise that cores are contiguos in the + * enumeration space. + */ +#define SB_BUS_SIZE 0x10000 /**< Each bus gets 64Kbytes for cores */ +#define SB_BUS_BASE(b) (SI_ENUM_BASE + (b) * SB_BUS_SIZE) +#define SB_BUS_MAXCORES (SB_BUS_SIZE / SI_CORE_SIZE) /**< Max cores per bus */ + +/* + * Sonics Configuration Space Registers. + */ +#define SBCONFIGOFF 0xf00 /**< core sbconfig regs are top 256bytes of regs */ +#define SBCONFIGSIZE 256 /**< sizeof (sbconfig_t) */ + +#define SBIPSFLAG 0x08 +#define SBTPSFLAG 0x18 +#define SBTMERRLOGA 0x48 /**< sonics >= 2.3 */ +#define SBTMERRLOG 0x50 /**< sonics >= 2.3 */ +#define SBADMATCH3 0x60 +#define SBADMATCH2 0x68 +#define SBADMATCH1 0x70 +#define SBIMSTATE 0x90 +#define SBINTVEC 0x94 +#define SBTMSTATELOW 0x98 +#define SBTMSTATEHIGH 0x9c +#define SBBWA0 0xa0 +#define SBIMCONFIGLOW 0xa8 +#define SBIMCONFIGHIGH 0xac +#define SBADMATCH0 0xb0 +#define SBTMCONFIGLOW 0xb8 +#define SBTMCONFIGHIGH 0xbc +#define SBBCONFIG 0xc0 +#define SBBSTATE 0xc8 +#define SBACTCNFG 0xd8 +#define SBFLAGST 0xe8 +#define SBIDLOW 0xf8 +#define SBIDHIGH 0xfc + +/* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have + * a few registers *below* that line. I think it would be very confusing to try + * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here, + */ + +#define SBIMERRLOGA 0xea8 +#define SBIMERRLOG 0xeb0 +#define SBTMPORTCONNID0 0xed8 +#define SBTMPORTLOCK0 0xef8 + +#if !defined(_LANGUAGE_ASSEMBLY) && !defined(__ASSEMBLY__) + +typedef volatile struct _sbconfig { + uint32 PAD[2]; + uint32 sbipsflag; /**< initiator port ocp slave flag */ + uint32 PAD[3]; + uint32 sbtpsflag; /**< target port ocp slave flag */ + uint32 PAD[11]; + uint32 sbtmerrloga; /**< (sonics >= 2.3) */ + uint32 PAD; + uint32 sbtmerrlog; /**< (sonics >= 2.3) */ + uint32 PAD[3]; + uint32 sbadmatch3; /**< address match3 */ + uint32 PAD; + uint32 sbadmatch2; /**< address match2 */ + uint32 PAD; + uint32 sbadmatch1; /**< address match1 */ + uint32 PAD[7]; + uint32 sbimstate; /**< initiator agent state */ + uint32 sbintvec; /**< interrupt mask */ + uint32 sbtmstatelow; /**< target state */ + uint32 sbtmstatehigh; /**< target state */ + uint32 sbbwa0; /**< bandwidth allocation table0 */ + uint32 PAD; + uint32 sbimconfiglow; /**< initiator configuration */ + uint32 sbimconfighigh; /**< initiator configuration */ + uint32 sbadmatch0; /**< address match0 */ + uint32 PAD; + uint32 sbtmconfiglow; /**< target configuration */ + uint32 sbtmconfighigh; /**< target configuration */ + uint32 sbbconfig; /**< broadcast configuration */ + uint32 PAD; + uint32 sbbstate; /**< broadcast state */ + uint32 PAD[3]; + uint32 sbactcnfg; /**< activate configuration */ + uint32 PAD[3]; + uint32 sbflagst; /**< current sbflags */ + uint32 PAD[3]; + uint32 sbidlow; /**< identification */ + uint32 sbidhigh; /**< identification */ +} sbconfig_t; + +#endif /* !_LANGUAGE_ASSEMBLY && !__ASSEMBLY__ */ + +/* sbipsflag */ +#define SBIPS_INT1_MASK 0x3f /**< which sbflags get routed to mips interrupt 1 */ +#define SBIPS_INT1_SHIFT 0 +#define SBIPS_INT2_MASK 0x3f00 /**< which sbflags get routed to mips interrupt 2 */ +#define SBIPS_INT2_SHIFT 8 +#define SBIPS_INT3_MASK 0x3f0000 /**< which sbflags get routed to mips interrupt 3 */ +#define SBIPS_INT3_SHIFT 16 +#define SBIPS_INT4_MASK 0x3f000000 /**< which sbflags get routed to mips interrupt 4 */ +#define SBIPS_INT4_SHIFT 24 + +/* sbtpsflag */ +#define SBTPS_NUM0_MASK 0x3f /**< interrupt sbFlag # generated by this core */ +#define SBTPS_F0EN0 0x40 /**< interrupt is always sent on the backplane */ + +/* sbtmerrlog */ +#define SBTMEL_CM 0x00000007 /**< command */ +#define SBTMEL_CI 0x0000ff00 /**< connection id */ +#define SBTMEL_EC 0x0f000000 /**< error code */ +#define SBTMEL_ME 0x80000000 /**< multiple error */ + +/* sbimstate */ +#define SBIM_PC 0xf /**< pipecount */ +#define SBIM_AP_MASK 0x30 /**< arbitration policy */ +#define SBIM_AP_BOTH 0x00 /**< use both timeslaces and token */ +#define SBIM_AP_TS 0x10 /**< use timesliaces only */ +#define SBIM_AP_TK 0x20 /**< use token only */ +#define SBIM_AP_RSV 0x30 /**< reserved */ +#define SBIM_IBE 0x20000 /**< inbanderror */ +#define SBIM_TO 0x40000 /**< timeout */ +#define SBIM_BY 0x01800000 /**< busy (sonics >= 2.3) */ +#define SBIM_RJ 0x02000000 /**< reject (sonics >= 2.3) */ + +/* sbtmstatelow */ +#define SBTML_RESET 0x0001 /**< reset */ +#define SBTML_REJ_MASK 0x0006 /**< reject field */ +#define SBTML_REJ 0x0002 /**< reject */ +#define SBTML_TMPREJ 0x0004 /**< temporary reject, for error recovery */ + +#define SBTML_SICF_SHIFT 16 /**< Shift to locate the SI control flags in sbtml */ + +/* sbtmstatehigh */ +#define SBTMH_SERR 0x0001 /**< serror */ +#define SBTMH_INT 0x0002 /**< interrupt */ +#define SBTMH_BUSY 0x0004 /**< busy */ +#define SBTMH_TO 0x0020 /**< timeout (sonics >= 2.3) */ + +#define SBTMH_SISF_SHIFT 16 /**< Shift to locate the SI status flags in sbtmh */ + +/* sbbwa0 */ +#define SBBWA_TAB0_MASK 0xffff /**< lookup table 0 */ +#define SBBWA_TAB1_MASK 0xffff /**< lookup table 1 */ +#define SBBWA_TAB1_SHIFT 16 + +/* sbimconfiglow */ +#define SBIMCL_STO_MASK 0x7 /**< service timeout */ +#define SBIMCL_RTO_MASK 0x70 /**< request timeout */ +#define SBIMCL_RTO_SHIFT 4 +#define SBIMCL_CID_MASK 0xff0000 /**< connection id */ +#define SBIMCL_CID_SHIFT 16 + +/* sbimconfighigh */ +#define SBIMCH_IEM_MASK 0xc /**< inband error mode */ +#define SBIMCH_TEM_MASK 0x30 /**< timeout error mode */ +#define SBIMCH_TEM_SHIFT 4 +#define SBIMCH_BEM_MASK 0xc0 /**< bus error mode */ +#define SBIMCH_BEM_SHIFT 6 + +/* sbadmatch0 */ +#define SBAM_TYPE_MASK 0x3 /**< address type */ +#define SBAM_AD64 0x4 /**< reserved */ +#define SBAM_ADINT0_MASK 0xf8 /**< type0 size */ +#define SBAM_ADINT0_SHIFT 3 +#define SBAM_ADINT1_MASK 0x1f8 /**< type1 size */ +#define SBAM_ADINT1_SHIFT 3 +#define SBAM_ADINT2_MASK 0x1f8 /**< type2 size */ +#define SBAM_ADINT2_SHIFT 3 +#define SBAM_ADEN 0x400 /**< enable */ +#define SBAM_ADNEG 0x800 /**< negative decode */ +#define SBAM_BASE0_MASK 0xffffff00 /**< type0 base address */ +#define SBAM_BASE0_SHIFT 8 +#define SBAM_BASE1_MASK 0xfffff000 /**< type1 base address for the core */ +#define SBAM_BASE1_SHIFT 12 +#define SBAM_BASE2_MASK 0xffff0000 /**< type2 base address for the core */ +#define SBAM_BASE2_SHIFT 16 + +/* sbtmconfiglow */ +#define SBTMCL_CD_MASK 0xff /**< clock divide */ +#define SBTMCL_CO_MASK 0xf800 /**< clock offset */ +#define SBTMCL_CO_SHIFT 11 +#define SBTMCL_IF_MASK 0xfc0000 /**< interrupt flags */ +#define SBTMCL_IF_SHIFT 18 +#define SBTMCL_IM_MASK 0x3000000 /**< interrupt mode */ +#define SBTMCL_IM_SHIFT 24 + +/* sbtmconfighigh */ +#define SBTMCH_BM_MASK 0x3 /**< busy mode */ +#define SBTMCH_RM_MASK 0x3 /**< retry mode */ +#define SBTMCH_RM_SHIFT 2 +#define SBTMCH_SM_MASK 0x30 /**< stop mode */ +#define SBTMCH_SM_SHIFT 4 +#define SBTMCH_EM_MASK 0x300 /**< sb error mode */ +#define SBTMCH_EM_SHIFT 8 +#define SBTMCH_IM_MASK 0xc00 /**< int mode */ +#define SBTMCH_IM_SHIFT 10 + +/* sbbconfig */ +#define SBBC_LAT_MASK 0x3 /**< sb latency */ +#define SBBC_MAX0_MASK 0xf0000 /**< maxccntr0 */ +#define SBBC_MAX0_SHIFT 16 +#define SBBC_MAX1_MASK 0xf00000 /**< maxccntr1 */ +#define SBBC_MAX1_SHIFT 20 + +/* sbbstate */ +#define SBBS_SRD 0x1 /**< st reg disable */ +#define SBBS_HRD 0x2 /**< hold reg disable */ + +/* sbidlow */ +#define SBIDL_CS_MASK 0x3 /**< config space */ +#define SBIDL_AR_MASK 0x38 /**< # address ranges supported */ +#define SBIDL_AR_SHIFT 3 +#define SBIDL_SYNCH 0x40 /**< sync */ +#define SBIDL_INIT 0x80 /**< initiator */ +#define SBIDL_MINLAT_MASK 0xf00 /**< minimum backplane latency */ +#define SBIDL_MINLAT_SHIFT 8 +#define SBIDL_MAXLAT 0xf000 /**< maximum backplane latency */ +#define SBIDL_MAXLAT_SHIFT 12 +#define SBIDL_FIRST 0x10000 /**< this initiator is first */ +#define SBIDL_CW_MASK 0xc0000 /**< cycle counter width */ +#define SBIDL_CW_SHIFT 18 +#define SBIDL_TP_MASK 0xf00000 /**< target ports */ +#define SBIDL_TP_SHIFT 20 +#define SBIDL_IP_MASK 0xf000000 /**< initiator ports */ +#define SBIDL_IP_SHIFT 24 +#define SBIDL_RV_MASK 0xf0000000 /**< sonics backplane revision code */ +#define SBIDL_RV_SHIFT 28 +#define SBIDL_RV_2_2 0x00000000 /**< version 2.2 or earlier */ +#define SBIDL_RV_2_3 0x10000000 /**< version 2.3 */ + +/* sbidhigh */ +#define SBIDH_RC_MASK 0x000f /**< revision code */ +#define SBIDH_RCE_MASK 0x7000 /**< revision code extension field */ +#define SBIDH_RCE_SHIFT 8 +#define SBCOREREV(sbidh) \ + ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) +#define SBIDH_CC_MASK 0x8ff0 /**< core code */ +#define SBIDH_CC_SHIFT 4 +#define SBIDH_VC_MASK 0xffff0000 /**< vendor code */ +#define SBIDH_VC_SHIFT 16 + +#define SB_COMMIT 0xfd8 /**< update buffered registers value */ + +/* vendor codes */ +#define SB_VEND_BCM 0x4243 /**< Broadcom's SB vendor code */ + +#endif /* _SBCONFIG_H */ |