diff options
Diffstat (limited to 'drivers/net/wireless/bcmdhd_1363/wl_dbg.h')
| -rw-r--r-- | drivers/net/wireless/bcmdhd_1363/wl_dbg.h | 211 |
1 files changed, 211 insertions, 0 deletions
diff --git a/drivers/net/wireless/bcmdhd_1363/wl_dbg.h b/drivers/net/wireless/bcmdhd_1363/wl_dbg.h new file mode 100644 index 000000000000..8d0a44045757 --- /dev/null +++ b/drivers/net/wireless/bcmdhd_1363/wl_dbg.h @@ -0,0 +1,211 @@ +/* + * Minimal debug/trace/assert driver definitions for + * Broadcom 802.11 Networking Adapter. + * + * Copyright (C) 1999-2017, Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2 (the "GPL"), + * available at http://www.broadcom.com/licenses/GPLv2.php, with the + * following added to such license: + * + * As a special exception, the copyright holders of this software give you + * permission to link this software with independent modules, and to copy and + * distribute the resulting executable under terms of your choice, provided that + * you also meet, for each linked independent module, the terms and conditions of + * the license of that module. An independent module is a module which is not + * derived from this software. The special exception does not apply to any + * modifications of the software. + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a license + * other than the GPL, without Broadcom's express prior written consent. + * + * + * <<Broadcom-WL-IPTag/Open:>> + * + * $Id: wl_dbg.h 519338 2014-12-05 21:23:30Z $ + */ + + +#ifndef _wl_dbg_h_ +#define _wl_dbg_h_ + +/* wl_msg_level is a bit vector with defs in wlioctl.h */ +extern uint32 wl_msg_level; +extern uint32 wl_msg_level2; + +#define WL_TIMESTAMP() + +#define WL_PRINT(args) do { WL_TIMESTAMP(); printf args; } while (0) + +#if defined(EVENT_LOG_COMPILE) && defined(WLMSG_SRSCAN) +#define _WL_SRSCAN(fmt, ...) EVENT_LOG(EVENT_LOG_TAG_SRSCAN, fmt, ##__VA_ARGS__) +#define WL_SRSCAN(args) _WL_SRSCAN args +#else +#define WL_SRSCAN(args) +#endif + +#if defined(BCMCONDITIONAL_LOGGING) + +/* Ideally this should be some include file that vendors can include to conditionalize logging */ + +/* DBGONLY() macro to reduce ifdefs in code for statements that are only needed when + * BCMDBG is defined. + */ +#define DBGONLY(x) + +/* To disable a message completely ... until you need it again */ +#define WL_NONE(args) +#define WL_ERROR(args) do {if (wl_msg_level & WL_ERROR_VAL) WL_PRINT(args);} while (0) +#define WL_TRACE(args) +#define WL_PRHDRS_MSG(args) +#define WL_PRHDRS(i, p, f, t, r, l) +#define WL_PRPKT(m, b, n) +#define WL_INFORM(args) +#define WL_TMP(args) +#define WL_OID(args) +#define WL_RATE(args) do {if (wl_msg_level & WL_RATE_VAL) WL_PRINT(args);} while (0) +#define WL_ASSOC(args) do {if (wl_msg_level & WL_ASSOC_VAL) WL_PRINT(args);} while (0) +#define WL_PRUSR(m, b, n) +#define WL_PS(args) do {if (wl_msg_level & WL_PS_VAL) WL_PRINT(args);} while (0) + +#define WL_PORT(args) +#define WL_DUAL(args) +#define WL_REGULATORY(args) do {if (wl_msg_level & WL_REGULATORY_VAL) WL_PRINT(args);} while (0) + +#define WL_MPC(args) +#define WL_APSTA(args) +#define WL_APSTA_BCN(args) +#define WL_APSTA_TX(args) +#define WL_APSTA_TSF(args) +#define WL_APSTA_BSSID(args) +#define WL_BA(args) +#define WL_MBSS(args) +#define WL_PROTO(args) + +#define WL_CAC(args) do {if (wl_msg_level & WL_CAC_VAL) WL_PRINT(args);} while (0) +#define WL_AMSDU(args) +#define WL_AMPDU(args) +#define WL_FFPLD(args) +#define WL_MCHAN(args) + +#define WL_DFS(args) +#define WL_WOWL(args) +#define WL_DPT(args) +#define WL_ASSOC_OR_DPT(args) +#define WL_SCAN(args) do {if (wl_msg_level2 & WL_SCAN_VAL) WL_PRINT(args);} while (0) +#define WL_COEX(args) +#define WL_RTDC(w, s, i, j) +#define WL_RTDC2(w, s, i, j) +#define WL_CHANINT(args) +#define WL_BTA(args) +#define WL_P2P(args) +#define WL_ITFR(args) +#define WL_TDLS(args) +#define WL_MCNX(args) +#define WL_PROT(args) +#define WL_PSTA(args) +#define WL_WFDS(m, b, n) +#define WL_TRF_MGMT(args) +#define WL_L2FILTER(args) +#define WL_MQ(args) +#define WL_TXBF(args) +#define WL_P2PO(args) +#define WL_ROAM(args) +#define WL_WNM(args) + + +#define WL_AMPDU_UPDN(args) +#define WL_AMPDU_RX(args) +#define WL_AMPDU_ERR(args) +#define WL_AMPDU_TX(args) +#define WL_AMPDU_CTL(args) +#define WL_AMPDU_HW(args) +#define WL_AMPDU_HWTXS(args) +#define WL_AMPDU_HWDBG(args) +#define WL_AMPDU_STAT(args) +#define WL_AMPDU_ERR_ON() 0 +#define WL_AMPDU_HW_ON() 0 +#define WL_AMPDU_HWTXS_ON() 0 + +#define WL_APSTA_UPDN(args) +#define WL_APSTA_RX(args) +#define WL_WSEC(args) +#define WL_WSEC_DUMP(args) +#define WL_PCIE(args) +#define WL_TSLOG(w, s, i, j) +#define WL_FBT(args) + +#define WL_ERROR_ON() (wl_msg_level & WL_ERROR_VAL) +#define WL_TRACE_ON() 0 +#define WL_PRHDRS_ON() 0 +#define WL_PRPKT_ON() 0 +#define WL_INFORM_ON() 0 +#define WL_TMP_ON() 0 +#define WL_OID_ON() 0 +#define WL_RATE_ON() (wl_msg_level & WL_RATE_VAL) +#define WL_ASSOC_ON() (wl_msg_level & WL_ASSOC_VAL) +#define WL_PRUSR_ON() 0 +#define WL_PS_ON() (wl_msg_level & WL_PS_VAL) +#define WL_PORT_ON() 0 +#define WL_WSEC_ON() 0 +#define WL_WSEC_DUMP_ON() 0 +#define WL_MPC_ON() 0 +#define WL_REGULATORY_ON() (wl_msg_level & WL_REGULATORY_VAL) +#define WL_APSTA_ON() 0 +#define WL_DFS_ON() 0 +#define WL_MBSS_ON() 0 +#define WL_CAC_ON() (wl_msg_level & WL_CAC_VAL) +#define WL_AMPDU_ON() 0 +#define WL_DPT_ON() 0 +#define WL_WOWL_ON() 0 +#define WL_SCAN_ON() (wl_msg_level2 & WL_SCAN_VAL) +#define WL_BTA_ON() 0 +#define WL_P2P_ON() 0 +#define WL_ITFR_ON() 0 +#define WL_MCHAN_ON() 0 +#define WL_TDLS_ON() 0 +#define WL_MCNX_ON() 0 +#define WL_PROT_ON() 0 +#define WL_PSTA_ON() 0 +#define WL_TRF_MGMT_ON() 0 +#define WL_LPC_ON() 0 +#define WL_L2FILTER_ON() 0 +#define WL_TXBF_ON() 0 +#define WL_P2PO_ON() 0 +#define WL_TSLOG_ON() 0 +#define WL_WNM_ON() 0 +#define WL_PCIE_ON() 0 + +#else /* !BCMDBG */ + +/* DBGONLY() macro to reduce ifdefs in code for statements that are only needed when + * BCMDBG is defined. + */ +#define DBGONLY(x) + +/* To disable a message completely ... until you need it again */ +#define WL_NONE(args) + +#define WL_ERROR(args) +#define WL_TRACE(args) +#define WL_APSTA_UPDN(args) +#define WL_APSTA_RX(args) +#ifdef WLMSG_WSEC +#define WL_WSEC(args) WL_PRINT(args) +#define WL_WSEC_DUMP(args) WL_PRINT(args) +#else +#define WL_WSEC(args) +#define WL_WSEC_DUMP(args) +#endif +#define WL_PCIE(args) do {if (wl_msg_level2 & WL_PCIE_VAL) WL_PRINT(args);} while (0) +#define WL_PCIE_ON() (wl_msg_level2 & WL_PCIE_VAL) +#define WL_PFN(args) do {if (wl_msg_level & WL_PFN_VAL) WL_PRINT(args);} while (0) +#define WL_PFN_ON() (wl_msg_level & WL_PFN_VAL) +#endif + +extern uint32 wl_msg_level; +extern uint32 wl_msg_level2; +#endif /* _wl_dbg_h_ */ |