summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/hostap/hostap_cs.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/hostap/hostap_cs.c')
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c38
1 files changed, 8 insertions, 30 deletions
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index a36501dbbe02..db72461c486b 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -39,7 +39,6 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
/* struct local_info::hw_priv */
struct hostap_cs_priv {
- dev_node_t node;
struct pcmcia_device *link;
int sandisk_connectplus;
};
@@ -556,15 +555,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
/* Do we need to allocate an interrupt? */
- if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
- else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
- /* At least Compaq WL200 does not have IRQInfo1 set,
- * but it does not work without interrupts.. */
- printk(KERN_WARNING "Config has no IRQ info, but trying to "
- "enable IRQ anyway..\n");
- p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
- }
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
@@ -633,21 +624,10 @@ static int prism2_config(struct pcmcia_device *link)
local = iface->local;
local->hw_priv = hw_priv;
hw_priv->link = link;
- strcpy(hw_priv->node.dev_name, dev->name);
- link->dev_node = &hw_priv->node;
- /*
- * Allocate an interrupt line. Note that this does not assign a
- * handler to the interrupt, unless the 'Handler' member of the
- * irq structure is initialized.
- */
- if (link->conf.Attributes & CONF_ENABLE_IRQ) {
- link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.Handler = prism2_interrupt;
- ret = pcmcia_request_irq(link, &link->irq);
- if (ret)
- goto failed;
- }
+ ret = pcmcia_request_irq(link, prism2_interrupt);
+ if (ret)
+ goto failed;
/*
* This actually configures the PCMCIA socket -- setting up
@@ -658,7 +638,7 @@ static int prism2_config(struct pcmcia_device *link)
if (ret)
goto failed;
- dev->irq = link->irq.AssignedIRQ;
+ dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
/* Finally, report what we've done */
@@ -668,7 +648,7 @@ static int prism2_config(struct pcmcia_device *link)
printk(", Vpp %d.%d", link->conf.Vpp / 10,
link->conf.Vpp % 10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
- printk(", irq %d", link->irq.AssignedIRQ);
+ printk(", irq %d", link->irq);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
@@ -682,11 +662,9 @@ static int prism2_config(struct pcmcia_device *link)
sandisk_enable_wireless(dev);
ret = prism2_hw_config(dev, 1);
- if (!ret) {
+ if (!ret)
ret = hostap_hw_ready(dev);
- if (ret == 0 && local->ddev)
- strcpy(hw_priv->node.dev_name, local->ddev->name);
- }
+
return ret;
failed: