diff options
Diffstat (limited to 'drivers/net/wireless/rtl8192ce/include/drv_types.h')
| -rwxr-xr-x | drivers/net/wireless/rtl8192ce/include/drv_types.h | 596 |
1 files changed, 596 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtl8192ce/include/drv_types.h b/drivers/net/wireless/rtl8192ce/include/drv_types.h new file mode 100755 index 000000000000..94247316fed7 --- /dev/null +++ b/drivers/net/wireless/rtl8192ce/include/drv_types.h @@ -0,0 +1,596 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +/*------------------------------------------------------------------------------- + + For type defines and data structure defines + +--------------------------------------------------------------------------------*/ + + +#ifndef __DRV_TYPES_H__ +#define __DRV_TYPES_H__ + +#include <drv_conf.h> +#include <osdep_service.h> +#include <wlan_bssdef.h> + + +#ifdef PLATFORM_OS_XP +#include <drv_types_xp.h> +#endif + +#ifdef PLATFORM_OS_CE +#include <drv_types_ce.h> +#endif + +#ifdef PLATFORM_LINUX +#include <drv_types_linux.h> +#endif + +enum _NIC_VERSION { + + RTL8711_NIC, + RTL8712_NIC, + RTL8713_NIC, + RTL8716_NIC + +}; + +enum{ + UP_LINK, + DOWN_LINK, +}; +typedef struct _ADAPTER _adapter, ADAPTER,*PADAPTER; + +#ifdef CONFIG_80211N_HT +#include <rtw_ht.h> +#endif + +#include <rtw_cmd.h> +#include <wlan_bssdef.h> +#include <rtw_xmit.h> +#include <rtw_recv.h> +#include <hal_init.h> +#include <rtw_qos.h> +#include <rtw_security.h> +#include <rtw_pwrctrl.h> +#include <rtw_io.h> +#include <rtw_eeprom.h> +#include <sta_info.h> +#include <rtw_mlme.h> +#include <rtw_debug.h> +#include <rtw_rf.h> +#include <rtw_event.h> +#include <rtw_led.h> +#include <rtw_mlme_ext.h> +#include <rtw_p2p.h> +#include <rtw_tdls.h> + +#ifdef CONFIG_DRVEXT_MODULE +#include <drvext_api.h> +#endif + +#ifdef CONFIG_MP_INCLUDED +#include <rtw_mp.h> +#endif + +#ifdef CONFIG_BR_EXT +#include <rtw_br_ext.h> +#endif // CONFIG_BR_EXT + +#ifdef CONFIG_IOCTL_CFG80211 + #include "ioctl_cfg80211.h" +#endif //CONFIG_IOCTL_CFG80211 + +#define SPEC_DEV_ID_NONE BIT(0) +#define SPEC_DEV_ID_DISABLE_HT BIT(1) +#define SPEC_DEV_ID_ENABLE_PS BIT(2) +#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3) +#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4) +#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5) + +struct specific_device_id{ + + u32 flags; + + u16 idVendor; + u16 idProduct; + +}; + +struct registry_priv +{ + u8 chip_version; + u8 rfintfs; + u8 lbkmode; + u8 hci; + NDIS_802_11_SSID ssid; + u8 network_mode; //infra, ad-hoc, auto + u8 channel;//ad-hoc support requirement + u8 wireless_mode;//A, B, G, auto + u8 scan_mode;//active, passive + u8 radio_enable; + u8 preamble;//long, short, auto + u8 vrtl_carrier_sense;//Enable, Disable, Auto + u8 vcs_type;//RTS/CTS, CTS-to-self + u16 rts_thresh; + u16 frag_thresh; + u8 adhoc_tx_pwr; + u8 soft_ap; + u8 power_mgnt; + u8 ips_mode; + u8 smart_ps; + u8 long_retry_lmt; + u8 short_retry_lmt; + u16 busy_thresh; + u8 ack_policy; + u8 mp_mode; + u8 software_encrypt; + u8 software_decrypt; + + u8 acm_method; + //UAPSD + u8 wmm_enable; + u8 uapsd_enable; + u8 uapsd_max_sp; + u8 uapsd_acbk_en; + u8 uapsd_acbe_en; + u8 uapsd_acvi_en; + u8 uapsd_acvo_en; + + WLAN_BSSID_EX dev_network; + +#ifdef CONFIG_80211N_HT + u8 ht_enable; + u8 cbw40_enable; + u8 ampdu_enable;//for tx + u8 rx_stbc; + u8 ampdu_amsdu;//A-MPDU Supports A-MSDU is permitted +#endif + u8 lowrate_two_xmit; + + u8 rf_config ; + u8 low_power ; + + u8 wifi_spec;// !turbo_mode + + u8 channel_plan; +#ifdef CONFIG_BT_COEXIST + u8 bt_iso; + u8 bt_sco; + u8 bt_ampdu; +#endif + BOOLEAN bAcceptAddbaReq; + + u8 antdiv_cfg; + + u8 usbss_enable;//0:disable,1:enable + u8 hwpdn_mode;//0:disable,1:enable,2:decide by EFUSE config + u8 hwpwrp_detect;//0:disable,1:enable + + u8 hw_wps_pbc;//0:disable,1:enable + +#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE + char adaptor_info_caching_file_path[PATH_LENGTH_MAX]; +#endif + +#ifdef CONFIG_LAYER2_ROAMING + u8 max_roaming_times; // the max number driver will try to roaming +#endif + +#ifdef CONFIG_IOL + bool force_iol; //enable iol without other concern +#endif + + u8 mac_phy_mode; //0:by efuse, 1:smsp, 2:dmdp, 3:dmsp. + +#ifdef CONFIG_80211D + u8 enable80211d; +#endif + + u8 ifname[16]; + u8 if2name[16]; + + u8 notch_filter; + +}; + + +//For registry parameters +#define RGTRY_OFT(field) ((ULONG)FIELD_OFFSET(struct registry_priv,field)) +#define RGTRY_SZ(field) sizeof(((struct registry_priv*) 0)->field) +#define BSSID_OFT(field) ((ULONG)FIELD_OFFSET(WLAN_BSSID_EX,field)) +#define BSSID_SZ(field) sizeof(((PWLAN_BSSID_EX) 0)->field) + +#define MAX_CONTINUAL_URB_ERR 4 + +#ifdef CONFIG_SDIO_HCI +#include <drv_types_sdio.h> +#define INTF_DATA SDIO_DATA +#endif + +struct dvobj_priv +{ + PADAPTER padapter; + + //For 92D, DMDP have 2 interface. + u8 InterfaceNumber; + u8 NumInterfaces; + +/*-------- below is for SDIO INTERFACE --------*/ + +#ifdef INTF_DATA + INTF_DATA intf_data; +#endif + +/*-------- below is for USB INTERFACE --------*/ + +#ifdef CONFIG_USB_HCI + + u8 nr_endpoint; + u8 ishighspeed; + u8 RtNumInPipes; + u8 RtNumOutPipes; + int ep_num[5]; //endpoint number + + int RegUsbSS; + + _sema usb_suspend_sema; + +#ifdef CONFIG_USB_VENDOR_REQ_MUTEX + _mutex usb_vendor_req_mutex; +#endif + +#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC + u8 * usb_alloc_vendor_req_buf; + u8 * usb_vendor_req_buf; +#endif + +#ifdef PLATFORM_WINDOWS + //related device objects + PDEVICE_OBJECT pphysdevobj;//pPhysDevObj; + PDEVICE_OBJECT pfuncdevobj;//pFuncDevObj; + PDEVICE_OBJECT pnextdevobj;//pNextDevObj; + + u8 nextdevstacksz;//unsigned char NextDeviceStackSize; //= (CHAR)CEdevice->pUsbDevObj->StackSize + 1; + + //urb for control diescriptor request + +#ifdef PLATFORM_OS_XP + struct _URB_CONTROL_DESCRIPTOR_REQUEST descriptor_urb; + PUSB_CONFIGURATION_DESCRIPTOR pconfig_descriptor;//UsbConfigurationDescriptor; +#endif + +#ifdef PLATFORM_OS_CE + WCHAR active_path[MAX_ACTIVE_REG_PATH]; // adapter regpath + USB_EXTENSION usb_extension; + + _nic_hdl pipehdls_r8192c[0x10]; +#endif + + u32 config_descriptor_len;//ULONG UsbConfigurationDescriptorLength; +#endif//PLATFORM_WINDOWS + +#ifdef PLATFORM_LINUX + struct usb_interface *pusbintf; + struct usb_device *pusbdev; +#endif//PLATFORM_LINUX + +#ifdef PLATFORM_FREEBSD + struct usb_interface *pusbintf; + struct usb_device *pusbdev; +#endif//PLATFORM_FREEBSD + ATOMIC_T continual_urb_error; +#endif//CONFIG_USB_HCI + +/*-------- below is for PCIE INTERFACE --------*/ + +#ifdef CONFIG_PCI_HCI + +#ifdef PLATFORM_LINUX + struct pci_dev *ppcidev; + + //PCI MEM map + unsigned long pci_mem_end; /* shared mem end */ + unsigned long pci_mem_start; /* shared mem start */ + + //PCI IO map + unsigned long pci_base_addr; /* device I/O address */ + + //PciBridge + struct pci_priv pcipriv; + + u16 irqline; + u8 irq_enabled; + u8 irq_alloc; + RT_ISR_CONTENT isr_content; + _lock irq_th_lock; + + //ASPM + u8 const_pci_aspm; + u8 const_amdpci_aspm; + u8 const_hwsw_rfoff_d3; + u8 const_support_pciaspm; + // pci-e bridge */ + u8 const_hostpci_aspm_setting; + // pci-e device */ + u8 const_devicepci_aspm_setting; + u8 b_support_aspm; // If it supports ASPM, Offset[560h] = 0x40, otherwise Offset[560h] = 0x00. + u8 b_support_backdoor; +#endif//PLATFORM_LINUX + +#endif//CONFIG_PCI_HCI +}; + + +enum _IFACE_TYPE { + IFACE_PORT0, //mapping to port0 for C/D series chips + IFACE_PORT1, //mapping to port1 for C/D series chip + MAX_IFACE_PORT, +}; + +enum _ADAPTER_TYPE { + PRIMARY_ADAPTER, + SECONDARY_ADAPTER, + MAX_ADAPTER, +}; + +#ifdef CONFIG_CONCURRENT_MODE +struct co_data_priv{ + + //george@20120518 + //current operating channel/bw/ch_offset + //save the correct ch/bw/ch_offset whatever the inputted values are + //when calling set_channel_bwmode() at concurrent mode + //for debug check or reporting to layer app (such as wpa_supplicant for nl80211) + u8 co_ch; + u8 co_bw; + u8 co_ch_offset; + u8 rsvd; + +}; +#endif //CONFIG_CONCURRENT_MODE + +typedef enum _DRIVER_STATE{ + DRIVER_NORMAL = 0, + DRIVER_DISAPPEAR = 1, + DRIVER_REPLACE_DONGLE = 2, +}DRIVER_STATE; + +#ifdef CONFIG_INTEL_PROXIM +struct proxim { + bool proxim_support; + bool proxim_on; + + void *proximity_priv; + int (*proxim_rx)(_adapter *padapter, + union recv_frame *precv_frame); + u8 (*proxim_get_var)(_adapter* padapter, u8 type); +}; +#endif //CONFIG_INTEL_PROXIM + +#ifdef RTL8723A_SDIO_LOOPBACK +typedef struct loopbackdata +{ + _sema sema; + _thread_hdl_ lbkthread; + u8 bstop; + u32 cnt; + u16 size; + u16 txsize; + u8 txbuf[0x8000]; + u16 rxsize; + u8 rxbuf[0x8000]; + u8 msg[100]; + +}LOOPBACKDATA, *PLOOPBACKDATA; +#endif + +struct _ADAPTER{ + int DriverState;// for disable driver using module, use dongle to replace module. + int pid[3];//process id from UI, 0:wps, 1:hostapd, 2:dhcpcd + int bDongle;//build-in module or external dongle + u16 chip_type; + u16 HardwareType; + u16 interface_type;//USB,SDIO,PCI + + struct dvobj_priv dvobjpriv; + struct mlme_priv mlmepriv; + struct mlme_ext_priv mlmeextpriv; + struct cmd_priv cmdpriv; + struct evt_priv evtpriv; + //struct io_queue *pio_queue; + struct io_priv iopriv; + struct xmit_priv xmitpriv; + struct recv_priv recvpriv; + struct sta_priv stapriv; + struct security_priv securitypriv; + struct registry_priv registrypriv; + struct wlan_acl_pool acl_list; + struct pwrctrl_priv pwrctrlpriv; + struct eeprom_priv eeprompriv; + struct led_priv ledpriv; + +#ifdef CONFIG_MP_INCLUDED + struct mp_priv mppriv; +#endif + +#ifdef CONFIG_DRVEXT_MODULE + struct drvext_priv drvextpriv; +#endif + +#ifdef CONFIG_AP_MODE + struct hostapd_priv *phostapdpriv; +#endif + +#ifdef CONFIG_IOCTL_CFG80211 +#ifdef CONFIG_P2P + struct cfg80211_wifidirect_info cfg80211_wdinfo; +#endif //CONFIG_P2P +#endif //CONFIG_IOCTL_CFG80211 + +#ifdef CONFIG_P2P + struct wifidirect_info wdinfo; +#endif //CONFIG_P2P + +#ifdef CONFIG_TDLS + struct tdls_info tdlsinfo; +#endif //CONFIG_TDLS + +#ifdef CONFIG_WFD + struct wifi_display_info wfd_info; +#endif //CONFIG_WFD + + PVOID HalData; + u32 hal_data_sz; + struct hal_ops HalFunc; + +#ifdef CONFIG_BT_COEXIST + //struct btcoexist_priv bt_coexist; +#endif + s32 bDriverStopped; + s32 bSurpriseRemoved; + s32 bCardDisableWOHSM; + + u32 IsrContent; + u32 ImrContent; + + u8 EepromAddressSize; + u8 hw_init_completed; + u8 bDriverIsGoingToUnload; + u8 init_adpt_in_progress; + u8 bHaltInProgress; + + _thread_hdl_ cmdThread; + _thread_hdl_ evtThread; + _thread_hdl_ xmitThread; + _thread_hdl_ recvThread; + + + NDIS_STATUS (*dvobj_init)(_adapter * adapter); + void (*dvobj_deinit)(_adapter * adapter); + + void (*intf_start)(_adapter * adapter); + void (*intf_stop)(_adapter * adapter); + +#ifdef PLATFORM_WINDOWS + _nic_hdl hndis_adapter;//hNdisAdapter(NDISMiniportAdapterHandle); + _nic_hdl hndis_config;//hNdisConfiguration; + NDIS_STRING fw_img; + + u32 NdisPacketFilter; + u8 MCList[MAX_MCAST_LIST_NUM][6]; + u32 MCAddrCount; +#endif //end of PLATFORM_WINDOWS + + +#ifdef PLATFORM_LINUX + _nic_hdl pnetdev; + + // used by rtw_rereg_nd_name related function + struct rereg_nd_name_data { + _nic_hdl old_pnetdev; + char old_ifname[IFNAMSIZ]; + u8 old_ips_mode; + u8 old_bRegUseLed; + } rereg_nd_name_priv; + + int bup; + struct net_device_stats stats; + struct iw_statistics iwstats; + struct proc_dir_entry *dir_dev;// for proc directory + +#ifdef CONFIG_IOCTL_CFG80211 + struct wireless_dev *rtw_wdev; +#endif //CONFIG_IOCTL_CFG80211 + +#endif //end of PLATFORM_LINUX + +#ifdef PLATFORM_FREEBSD + _nic_hdl pifp; + int bup; + _lock glock; +#endif //PLATFORM_FREEBSD + int net_closed; + + u8 bFWReady; + u8 bReadPortCancel; + u8 bWritePortCancel; + u8 bRxRSSIDisplay; +#ifdef CONFIG_AUTOSUSPEND + u8 bDisableAutosuspend; +#endif + + _adapter *pbuddy_adapter; + + _mutex *hw_init_mutex; +#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT) + u8 isprimary; //is primary adapter or not + u8 adapter_type; + u8 iface_type; //interface port type + + //for global synchronization + _mutex *ph2c_fwcmd_mutex; + _mutex *psetch_mutex; + _mutex *psetbw_mutex; + + struct co_data_priv *pcodatapriv;//data buffer shared among interfaces +#endif + +#ifdef CONFIG_DUALMAC_CONCURRENT + u8 DualMacConcurrent; // 1: DMSP 0:DMDP +#endif + +#ifdef CONFIG_BR_EXT + _lock br_ext_lock; + //unsigned int macclone_completed; + struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE]; + int pppoe_connection_in_progress; + unsigned char pppoe_addr[MACADDRLEN]; + unsigned char scdb_mac[MACADDRLEN]; + unsigned char scdb_ip[4]; + struct nat25_network_db_entry *scdb_entry; + unsigned char br_mac[MACADDRLEN]; + unsigned char br_ip[4]; + + struct br_ext_info ethBrExtInfo; +#endif // CONFIG_BR_EXT + +#ifdef CONFIG_INTEL_PROXIM + /* intel Proximity, should be alloc mem + * in intel Proximity module and can only + * be used in intel Proximity mode */ + struct proxim proximity; +#endif //CONFIG_INTEL_PROXIM + +#ifdef RTL8723A_SDIO_LOOPBACK + PLOOPBACKDATA ploopback; +#endif + +}; + +__inline static u8 *myid(struct eeprom_priv *peepriv) +{ + return (peepriv->mac_addr); +} + + +#endif //__DRV_TYPES_H__ + |