diff options
Diffstat (limited to 'drivers/net/wireless/rtl8723as/core/rtw_bt_mp.c')
-rwxr-xr-x | drivers/net/wireless/rtl8723as/core/rtw_bt_mp.c | 3469 |
1 files changed, 1735 insertions, 1734 deletions
diff --git a/drivers/net/wireless/rtl8723as/core/rtw_bt_mp.c b/drivers/net/wireless/rtl8723as/core/rtw_bt_mp.c index 8b2afecc7b62..e3e0f3d95fec 100755 --- a/drivers/net/wireless/rtl8723as/core/rtw_bt_mp.c +++ b/drivers/net/wireless/rtl8723as/core/rtw_bt_mp.c @@ -1,1734 +1,1735 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * - ******************************************************************************/ - - -#include "rtw_bt_mp.h" -#include <drv_types.h> -#include <rtl8723a_hal.h> - -#ifdef CONFIG_RTL8723A - -void MPh2c_timeout_handle(void *FunctionContext) -{ - _adapter *pAdapter = (_adapter *)FunctionContext; - PMPT_CONTEXT pMptCtx=&pAdapter->mppriv.MptCtx; - - DBG_8192C("[MPT], MPh2c_timeout_handle \n"); - - pMptCtx->bMPh2c_timeout=_TRUE; - - _rtw_up_sema(&pMptCtx->MPh2c_Sema); - - //_cancel_timer_ex( &pMptCtx->MPh2c_timeout_timer); - - return; -} -u32 WaitC2Hevent( PADAPTER pAdapter,BOOLEAN *C2H_event ,u32 delay_time) -{ - PMPT_CONTEXT pMptCtx=&(pAdapter->mppriv.MptCtx); - pMptCtx->bMPh2c_timeout=_FALSE; - - _set_timer( &pMptCtx->MPh2c_timeout_timer, delay_time ); - - _rtw_down_sema(&pMptCtx->MPh2c_Sema); - - if( pMptCtx->bMPh2c_timeout == _TRUE ) - { - C2H_event =_FALSE; - - return _FALSE; - } - - return _TRUE; - -} - -BT_CTRL_STATUS -mptbt_CheckC2hFrame( - PADAPTER Adapter, - PBT_H2C pH2c, - PBT_EXT_C2H pExtC2h - ) -{ - BT_CTRL_STATUS c2hStatus = BT_STATUS_C2H_SUCCESS; - - //DBG_8192C("[MPT], MPT rsp C2H hex: %x %x %x %x %x %x \n"), pExtC2h , pExtC2h+1 ,pExtC2h+2 ,pExtC2h+3 ,pExtC2h+4 ,pExtC2h+5); - - DBG_8192C("[MPT], statusCode = 0x%x\n", pExtC2h->statusCode); - DBG_8192C("[MPT], retLen = %d\n", pExtC2h->retLen); - DBG_8192C("[MPT], opCodeVer : req/rsp=%d/%d\n", pH2c->opCodeVer, pExtC2h->opCodeVer); - DBG_8192C("[MPT], reqNum : req/rsp=%d/%d\n", pH2c->reqNum, pExtC2h->reqNum); - if(pExtC2h->reqNum != pH2c->reqNum) - { - c2hStatus = BT_STATUS_C2H_REQNUM_MISMATCH; - DBG_8192C("[MPT], Error!! C2H reqNum Mismatch!!\n"); - } - else if(pExtC2h->opCodeVer != pH2c->opCodeVer) - { - c2hStatus = BT_STATUS_OPCODE_L_VERSION_MISMATCH; - DBG_8192C("[MPT], Error!! OPCode version L mismatch!!\n"); - } - - return c2hStatus; -} - -extern s32 FillH2CCmd(PADAPTER padapter, u8 ElementID, u32 CmdLen, u8 *pCmdBuffer); - -BT_CTRL_STATUS -mptbt_SendH2c( - PADAPTER Adapter, - PBT_H2C pH2c, - u2Byte h2cCmdLen - ) -{ - //KIRQL OldIrql = KeGetCurrentIrql(); - BT_CTRL_STATUS h2cStatus=BT_STATUS_H2C_SUCCESS; - PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx); - u1Byte i; - - DBG_8192C("[MPT], mptbt_SendH2c()=========>\n"); - - //PlatformResetEvent(&pMptCtx->MptH2cRspEvent); - //PlatformResetEvent(&pMptCtx->MptBtC2hEvent); - -// if(OldIrql == PASSIVE_LEVEL) -// { - //RTPRINT_DATA(FMPBT, FMPBT_H2C_CONTENT, ("[MPT], MPT H2C hex: \n"), pH2c, h2cCmdLen); - - for(i=0; i<BT_H2C_MAX_RETRY; i++) - { - DBG_8192C("[MPT], Send H2C command to wifi!!!\n"); - FillH2CCmd(Adapter, 70, h2cCmdLen, (pu1Byte)pH2c); - pMptCtx->h2cReqNum++; - pMptCtx->h2cReqNum %= 16; - - if(WaitC2Hevent(Adapter, &pMptCtx->MptH2cRspEvent, 100)) - { - DBG_8192C("[MPT], Received WiFi MptH2cRspEvent!!!\n"); - if(WaitC2Hevent(Adapter, &pMptCtx->MptBtC2hEvent, 400)) - { - DBG_8192C("[MPT], Received MptBtC2hEvent!!!\n"); - break; - } - else - { - DBG_8192C("[MPT], Error!!BT MptBtC2hEvent timeout!!\n"); - h2cStatus = BT_STATUS_H2C_BT_NO_RSP; - } - } - else - { - DBG_8192C("[MPT], Error!!WiFi MptH2cRspEvent timeout!!\n"); - h2cStatus = BT_STATUS_H2C_TIMTOUT; - } - } -// } -// else -// { -// RT_ASSERT(FALSE, ("[MPT], mptbt_SendH2c() can only run under PASSIVE_LEVEL!!\n")); -// h2cStatus = BT_STATUS_WRONG_LEVEL; -// } - - DBG_8192C("[MPT], mptbt_SendH2c()<=========\n"); - return h2cStatus; -} - - - -BT_CTRL_STATUS -mptbt_CheckBtRspStatus( - PADAPTER Adapter, - PBT_EXT_C2H pExtC2h - ) -{ - BT_CTRL_STATUS retStatus=BT_OP_STATUS_SUCCESS; - - switch(pExtC2h->statusCode) - { - case BT_OP_STATUS_SUCCESS: - retStatus = BT_STATUS_BT_OP_SUCCESS; - DBG_8192C("[MPT], BT status : BT_STATUS_SUCCESS\n"); - break; - case BT_OP_STATUS_VERSION_MISMATCH: - retStatus = BT_STATUS_OPCODE_L_VERSION_MISMATCH; - DBG_8192C("[MPT], BT status : BT_STATUS_OPCODE_L_VERSION_MISMATCH\n"); - break; - case BT_OP_STATUS_UNKNOWN_OPCODE: - retStatus = BT_STATUS_UNKNOWN_OPCODE_L; - DBG_8192C("[MPT], BT status : BT_STATUS_UNKNOWN_OPCODE_L\n"); - break; - case BT_OP_STATUS_ERROR_PARAMETER: - retStatus = BT_STATUS_PARAMETER_FORMAT_ERROR_L; - DBG_8192C("[MPT], BT status : BT_STATUS_PARAMETER_FORMAT_ERROR_L\n"); - break; - default: - retStatus = BT_STATUS_UNKNOWN_STATUS_L; - DBG_8192C("[MPT], BT status : BT_STATUS_UNKNOWN_STATUS_L\n"); - break; - } - - return retStatus; -} - - - -BT_CTRL_STATUS -mptbt_BtFwOpCodeProcess( - PADAPTER Adapter, - u1Byte btFwOpCode, - u1Byte opCodeVer, - pu1Byte pH2cPar, - u1Byte h2cParaLen - ) -{ - u1Byte H2C_Parameter[6] ={0}; - PBT_H2C pH2c=(PBT_H2C)&H2C_Parameter[0]; - PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx); - PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)&pMptCtx->c2hBuf[0]; - u2Byte paraLen=0,i; - BT_CTRL_STATUS h2cStatus=BT_STATUS_H2C_SUCCESS, c2hStatus=BT_STATUS_C2H_SUCCESS; - BT_CTRL_STATUS retStatus=BT_STATUS_H2C_BT_NO_RSP; - - pH2c->opCode = btFwOpCode; - pH2c->opCodeVer = opCodeVer; - pH2c->reqNum = pMptCtx->h2cReqNum; - //PlatformMoveMemory(&pH2c->buf[0], pH2cPar, h2cParaLen); - //_rtw_memcpy(&pH2c->buf[0], pH2cPar, h2cParaLen); - _rtw_memcpy(pH2c->buf, pH2cPar, h2cParaLen); - - DBG_8192C("[MPT], pH2c->opCode=%d\n", pH2c->opCode); - DBG_8192C("[MPT], pH2c->opCodeVer=%d\n", pH2c->opCodeVer); - DBG_8192C("[MPT], pH2c->reqNum=%d\n", pH2c->reqNum); - DBG_8192C("[MPT], h2c parameter length=%d\n", h2cParaLen); - if(h2cParaLen) - { - DBG_8192C("[MPT], parameters(hex): \n"); - for(i=0;i<h2cParaLen;i++) - { - DBG_8192C(" 0x%x \n", pH2c->buf[i]); - } - } - - h2cStatus = mptbt_SendH2c(Adapter, pH2c, h2cParaLen+2); - if(BT_STATUS_H2C_SUCCESS == h2cStatus) - { - // if reach here, it means H2C get the correct c2h response, - c2hStatus = mptbt_CheckC2hFrame(Adapter, pH2c, pExtC2h); - if(BT_STATUS_C2H_SUCCESS == c2hStatus) - { - retStatus = mptbt_CheckBtRspStatus(Adapter, pExtC2h); - } - else - { - DBG_8192C("[MPT], Error!! C2H failed for pH2c->opCode=%d\n", pH2c->opCode); - // check c2h status error, return error status code to upper layer. - retStatus = c2hStatus; - } - } - else - { - DBG_8192C("[MPT], Error!! H2C failed for pH2c->opCode=%d\n", pH2c->opCode); - // check h2c status error, return error status code to upper layer. - retStatus = h2cStatus; - } - - return retStatus; -} - - - - -u2Byte -mptbt_BtReady( - PADAPTER Adapter, - PBT_REQ_CMD pBtReq, - PBT_RSP_CMD pBtRsp - ) -{ - u1Byte h2cParaBuf[6] ={0}; - u1Byte h2cParaLen=0; - u2Byte paraLen=0; - u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS; - u1Byte btOpcode; - u1Byte btOpcodeVer=0; - PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx); - PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)&pMptCtx->c2hBuf[0]; - u1Byte i; - u1Byte btFwVer=0, bdAddr[6]={0}; - u2Byte btRealFwVer=0; - pu2Byte pu2Tmp=NULL; - - // - // check upper layer parameters - // - - // 1. check upper layer opcode version - if(pBtReq->opCodeVer != 1) - { - DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n"); - pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH; - return paraLen; - } - - pBtRsp->pParamStart[0] = MP_BT_NOT_READY; - paraLen = 10; - // - // execute lower layer opcodes - // - - // Get BT FW version - // fill h2c parameters - btOpcode = BT_LO_OP_GET_BT_VERSION; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - else - { - pu2Tmp = (pu2Byte)&pExtC2h->buf[0]; - btRealFwVer = *pu2Tmp; - btFwVer = pExtC2h->buf[1]; - DBG_8192C("[MPT], btRealFwVer=0x%x, btFwVer=0x%x\n", btRealFwVer, btFwVer); - } - - // Get BD Address - // fill h2c parameters - btOpcode = BT_LO_OP_GET_BD_ADDR_L; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - else - { - bdAddr[5] = pExtC2h->buf[0]; - bdAddr[4] = pExtC2h->buf[1]; - bdAddr[3] = pExtC2h->buf[2]; - } - - // fill h2c parameters - btOpcode = BT_LO_OP_GET_BD_ADDR_H; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - else - { - bdAddr[2] = pExtC2h->buf[0]; - bdAddr[1] = pExtC2h->buf[1]; - bdAddr[0] = pExtC2h->buf[2]; - } - DBG_8192C("[MPT], Local BDAddr:"); - for(i=0; i<6; i++) - { - DBG_8192C(" 0x%x ", bdAddr[i]); - } - pBtRsp->status = BT_STATUS_SUCCESS; - pBtRsp->pParamStart[0] = MP_BT_READY; - pu2Tmp = (pu2Byte)&pBtRsp->pParamStart[1]; - *pu2Tmp = btRealFwVer; - pBtRsp->pParamStart[3] = btFwVer; - for(i=0; i<6; i++) - { - pBtRsp->pParamStart[4+i] = bdAddr[5-i]; - } - - return paraLen; -} - -void mptbt_close_WiFiRF(PADAPTER Adapter) -{ - PHY_SetBBReg(Adapter, 0x824, 0xF, 0x0); - PHY_SetBBReg(Adapter, 0x824, 0x700000, 0x0); - PHY_SetRFReg(Adapter, RF90_PATH_A, 0x0, 0xF0000, 0x0); -} - -void mptbt_open_WiFiRF(PADAPTER Adapter) -{ - PHY_SetBBReg(Adapter, 0x824, 0x700000, 0x3); - PHY_SetBBReg(Adapter, 0x824, 0xF, 0x2); - PHY_SetRFReg(Adapter, RF90_PATH_A, 0x0, 0xF0000, 0x3); -} - -u4Byte mptbt_switch_RF(PADAPTER Adapter, u1Byte Enter) -{ - u2Byte tmp_2byte = 0; - - //Enter test mode - if (Enter) { - ////1>. close WiFi RF - mptbt_close_WiFiRF(Adapter); - - ////2>. change ant switch to BT - tmp_2byte = rtw_read16(Adapter, 0x860); - tmp_2byte = tmp_2byte | BIT(9); - tmp_2byte = tmp_2byte & (~BIT(8)); - rtw_write16(Adapter, 0x860, tmp_2byte); - rtw_write16(Adapter, 0x870, 0x300); - } else { - ////1>. Open WiFi RF - mptbt_open_WiFiRF(Adapter); - - ////2>. change ant switch back - tmp_2byte = rtw_read16(Adapter, 0x860); - tmp_2byte = tmp_2byte | BIT(8); - tmp_2byte = tmp_2byte & (~BIT(9)); - rtw_write16(Adapter, 0x860, tmp_2byte); - rtw_write16(Adapter, 0x870, 0x300); - } - - return 0; -} - -u2Byte -mptbt_BtSetMode( - PADAPTER Adapter, - PBT_REQ_CMD pBtReq, - PBT_RSP_CMD pBtRsp - ) -{ - u1Byte h2cParaBuf[6] ={0}; - u1Byte h2cParaLen=0; - u2Byte paraLen=0; - u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS; - u1Byte btOpcode; - u1Byte btOpcodeVer=0; - u1Byte btModeToSet=0; - - // - // check upper layer parameters - // - // 1. check upper layer opcode version - if(pBtReq->opCodeVer != 1) - { - DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n"); - pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH; - return paraLen; - } - // 2. check upper layer parameter length - if(1 == pBtReq->paraLength) - { - btModeToSet = pBtReq->pParamStart[0]; - DBG_8192C("[MPT], BtTestMode=%d \n", btModeToSet); - } - else - { - DBG_8192C("[MPT], Error!! wrong parameter length=%d (should be 1)\n", pBtReq->paraLength); - pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U; - return paraLen; - } - - // - // execute lower layer opcodes - // - - // 1. fill h2c parameters - // check bt mode - btOpcode = BT_LO_OP_SET_BT_MODE; - if(btModeToSet >= MP_BT_MODE_MAX) - { - pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - mptbt_switch_RF(Adapter, 1); - - h2cParaBuf[0] = btModeToSet; - h2cParaLen = 1; - // 2. execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // 3. construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS == retStatus) - { - pBtRsp->status = BT_STATUS_SUCCESS; - } - else - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - } - - return paraLen; -} - - -VOID -MPTBT_FwC2hBtMpCtrl( - PADAPTER Adapter, - pu1Byte tmpBuf, - u1Byte length - ) -{ - u32 i; - PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx); - PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)tmpBuf; - - if(Adapter->bBTFWReady == _FALSE || Adapter->registrypriv.mp_mode == 0 ) - { - DBG_8192C("[MPT], %s,bBTFWReady == _FALSE\n",__func__); - return; - } - //cancel_timeout for h2c handle - _cancel_timer_ex( &pMptCtx->MPh2c_timeout_timer); - - DBG_8192C("[MPT], MPTBT_FwC2hBtMpCtrl(), hex: \n"); - for(i=0;i<=length;i++) - { - //DBG_8192C("[MPT], MPTBT_FwC2hBtMpCtrl(), hex: \n",tmpBuf[i], length); - DBG_8192C(" 0x%x ",tmpBuf[i]); - } - DBG_8192C("\n [MPT], pExtC2h->extendId=0x%x\n", pExtC2h->extendId); - - switch(pExtC2h->extendId) - { - case EXT_C2H_WIFI_FW_ACTIVE_RSP: - DBG_8192C("[MPT], EXT_C2H_WIFI_FW_ACTIVE_RSP\n"); - DBG_8192C("[MPT], pExtC2h->buf hex: \n"); - if( length > 32 || length < 3 ) - break ; - for(i=0;i<=(length-3);i++) - DBG_8192C(" 0x%x ",pExtC2h->buf[i]); - //PlatformSetEvent(&pMptCtx->MptH2cRspEvent); - pMptCtx->MptH2cRspEvent=_TRUE; - _rtw_up_sema(&pMptCtx->MPh2c_Sema); - break; - case EXT_C2H_TRIG_BY_BT_FW: - DBG_8192C("[MPT], EXT_C2H_TRIG_BY_BT_FW\n"); - //PlatformMoveMemory(&pMptCtx->c2hBuf[0], tmpBuf, length); - _rtw_memcpy(&pMptCtx->c2hBuf[0], tmpBuf, length); - DBG_8192C("[MPT], pExtC2h->statusCode=0x%x\n", pExtC2h->statusCode); - DBG_8192C("[MPT], pExtC2h->retLen=0x%x\n", pExtC2h->retLen); - DBG_8192C("[MPT], pExtC2h->opCodeVer=0x%x\n", pExtC2h->opCodeVer); - DBG_8192C("[MPT], pExtC2h->reqNum=0x%x\n", pExtC2h->reqNum); - DBG_8192C("[MPT], pExtC2h->buf hex: \n"); - for(i=0;i<=(length-3);i++) - DBG_8192C(" 0x%x ",pExtC2h->buf[0]); - //PlatformSetEvent(&pMptCtx->MptBtC2hEvent); - pMptCtx->MptBtC2hEvent=_TRUE; - _rtw_up_sema(&pMptCtx->MPh2c_Sema); - break; - default: - break; - } - - - -} - - -u2Byte -mptbt_BtGetGeneral( - IN PADAPTER Adapter, - IN PBT_REQ_CMD pBtReq, - IN PBT_RSP_CMD pBtRsp - ) -{ - PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx); - PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)&pMptCtx->c2hBuf[0]; - u1Byte h2cParaBuf[6] ={0}; - u1Byte h2cParaLen=0; - u2Byte paraLen=0; - u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS; - u1Byte btOpcode, bdAddr[6]={0}; - u1Byte btOpcodeVer=0; - u1Byte getType=0, i; - u2Byte getParaLen=0, validParaLen=0; - u1Byte regType=0, reportType=0; - u4Byte regAddr=0, regValue=0; - pu4Byte pu4Tmp; - pu2Byte pu2Tmp; - pu1Byte pu1Tmp; - - // - // check upper layer parameters - // - - // check upper layer opcode version - if(pBtReq->opCodeVer != 1) - { - DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n"); - pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH; - return paraLen; - } - // check upper layer parameter length - if(pBtReq->paraLength < 1) - { - DBG_8192C("[MPT], Error!! wrong parameter length=%d (should larger than 1)\n", pBtReq->paraLength); - pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U; - return paraLen; - } - getParaLen = pBtReq->paraLength - 1; - getType = pBtReq->pParamStart[0]; - - DBG_8192C("[MPT], getType=%d, getParaLen=%d\n", getType, getParaLen); - - // check parameter first - switch(getType) - { - case BT_GGET_REG: - DBG_8192C("[MPT], [BT_GGET_REG]\n"); - validParaLen = 5; - if(getParaLen == validParaLen) - { - btOpcode = BT_LO_OP_READ_REG; - regType = pBtReq->pParamStart[1]; - pu4Tmp = (pu4Byte)&pBtReq->pParamStart[2]; - regAddr = *pu4Tmp; - DBG_8192C("[MPT], BT_GGET_REG regType=0x%x, regAddr=0x%x!!\n", - regType, regAddr); - if(regType >= BT_REG_MAX) - { - pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - if( ((BT_REG_RF==regType)&&(regAddr>0x7f)) || - ((BT_REG_MODEM==regType)&&(regAddr>0x1ff)) || - ((BT_REG_BLUEWIZE==regType)&&(regAddr>0xfff)) || - ((BT_REG_VENDOR==regType)&&(regAddr>0xfff)) || - ((BT_REG_LE==regType)&&(regAddr>0xfff)) ) - { - pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - } - } - break; - case BT_GGET_STATUS: - DBG_8192C("[MPT], [BT_GGET_STATUS]\n"); - validParaLen = 0; - break; - case BT_GGET_REPORT: - DBG_8192C("[MPT], [BT_GGET_REPORT]\n"); - validParaLen = 1; - if(getParaLen == validParaLen) - { - reportType = pBtReq->pParamStart[1]; - DBG_8192C("[MPT], BT_GGET_REPORT reportType=0x%x!!\n", reportType); - if(reportType >= BT_REPORT_MAX) - { - pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - } - break; - default: - { - DBG_8192C("[MPT], Error!! getType=%d, out of range\n", getType); - pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - break; - } - if(getParaLen != validParaLen) - { - DBG_8192C("[MPT], Error!! wrong parameter length=%d for BT_GET_GEN_CMD cmd id=0x%x, paraLen should=0x%x\n", - getParaLen, getType, validParaLen); - pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U; - return paraLen; - } - - // - // execute lower layer opcodes - // - if(BT_GGET_REG == getType) - { - // fill h2c parameters - // here we should write reg value first then write the address, adviced by Austin - btOpcode = BT_LO_OP_READ_REG; - h2cParaBuf[0] = regType; - h2cParaBuf[1] = pBtReq->pParamStart[2]; - h2cParaBuf[2] = pBtReq->pParamStart[3]; - h2cParaLen = 3; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - pu2Tmp = (pu2Byte)&pExtC2h->buf[0]; - regValue = *pu2Tmp; - DBG_8192C("[MPT], read reg regType=0x%x, regAddr=0x%x, regValue=0x%x\n", - regType, regAddr, regValue); - - pu4Tmp = (pu4Byte)&pBtRsp->pParamStart[0]; - *pu4Tmp = regValue; - paraLen = 4; - } - else if(BT_GGET_STATUS == getType) - { - btOpcode = BT_LO_OP_GET_BT_STATUS; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - pBtRsp->pParamStart[0] = pExtC2h->buf[0]; - pBtRsp->pParamStart[1] = pExtC2h->buf[1]; - DBG_8192C("[MPT], read bt status, testMode=0x%x, testStatus=0x%x\n", - pBtRsp->pParamStart[0], pBtRsp->pParamStart[1]); - paraLen = 2; - } - else if(BT_GGET_REPORT == getType) - { - switch(reportType) - { - case BT_REPORT_RX_PACKET_CNT: - { - DBG_8192C("[MPT], [Rx Packet Counts]\n"); - btOpcode = BT_LO_OP_GET_RX_PKT_CNT_L; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - pBtRsp->pParamStart[0] = pExtC2h->buf[0]; - pBtRsp->pParamStart[1] = pExtC2h->buf[1]; - - btOpcode = BT_LO_OP_GET_RX_PKT_CNT_H; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - pBtRsp->pParamStart[2] = pExtC2h->buf[0]; - pBtRsp->pParamStart[3] = pExtC2h->buf[1]; - paraLen = 4; - } - break; - case BT_REPORT_RX_ERROR_BITS: - { - DBG_8192C("[MPT], [Rx Error Bits]\n"); - btOpcode = BT_LO_OP_GET_RX_ERROR_BITS_L; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - pBtRsp->pParamStart[0] = pExtC2h->buf[0]; - pBtRsp->pParamStart[1] = pExtC2h->buf[1]; - - btOpcode = BT_LO_OP_GET_RX_ERROR_BITS_H; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - pBtRsp->pParamStart[2] = pExtC2h->buf[0]; - pBtRsp->pParamStart[3] = pExtC2h->buf[1]; - paraLen = 4; - } - break; - case BT_REPORT_RSSI: - { - DBG_8192C("[MPT], [RSSI]\n"); - btOpcode = BT_LO_OP_GET_RSSI; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - pBtRsp->pParamStart[0] = pExtC2h->buf[0]; - pBtRsp->pParamStart[1] = pExtC2h->buf[1]; - paraLen = 2; - } - break; - case BT_REPORT_CFO_HDR_QUALITY: - { - DBG_8192C("[MPT], [CFO & Header Quality]\n"); - btOpcode = BT_LO_OP_GET_CFO_HDR_QUALITY_L; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - pBtRsp->pParamStart[0] = pExtC2h->buf[0]; - pBtRsp->pParamStart[1] = pExtC2h->buf[1]; - - btOpcode = BT_LO_OP_GET_CFO_HDR_QUALITY_H; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - pBtRsp->pParamStart[2] = pExtC2h->buf[0]; - pBtRsp->pParamStart[3] = pExtC2h->buf[1]; - paraLen = 4; - } - break; - case BT_REPORT_CONNECT_TARGET_BD_ADDR: - { - DBG_8192C("[MPT], [Connected Target BD ADDR]\n"); - btOpcode = BT_LO_OP_GET_TARGET_BD_ADDR_L; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - bdAddr[5] = pExtC2h->buf[0]; - bdAddr[4] = pExtC2h->buf[1]; - bdAddr[3] = pExtC2h->buf[2]; - - btOpcode = BT_LO_OP_GET_TARGET_BD_ADDR_H; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - bdAddr[2] = pExtC2h->buf[0]; - bdAddr[1] = pExtC2h->buf[1]; - bdAddr[0] = pExtC2h->buf[2]; - - DBG_8192C("[MPT], Connected Target BDAddr:%s", bdAddr); - for(i=0; i<6; i++) - { - pBtRsp->pParamStart[i] = bdAddr[5-i]; - } - paraLen = 6; - } - break; - default: - pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - break; - } - } - - pBtRsp->status = BT_STATUS_SUCCESS; - return paraLen; -} - - - -u2Byte -mptbt_BtSetGeneral( - IN PADAPTER Adapter, - IN PBT_REQ_CMD pBtReq, - IN PBT_RSP_CMD pBtRsp - ) -{ - u1Byte h2cParaBuf[6] ={0}; - u1Byte h2cParaLen=0; - u2Byte paraLen=0; - u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS; - u1Byte btOpcode; - u1Byte btOpcodeVer=0; - u1Byte setType=0; - u2Byte setParaLen=0, validParaLen=0; - u1Byte regType=0, bdAddr[6]={0}, calVal=0; - u4Byte regAddr=0, regValue=0; - pu4Byte pu4Tmp; - pu2Byte pu2Tmp; - pu1Byte pu1Tmp; - - // - // check upper layer parameters - // - - // check upper layer opcode version - if(pBtReq->opCodeVer != 1) - { - DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n"); - pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH; - return paraLen; - } - // check upper layer parameter length - if(pBtReq->paraLength < 1) - { - DBG_8192C("[MPT], Error!! wrong parameter length=%d (should larger than 1)\n", pBtReq->paraLength); - pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U; - return paraLen; - } - setParaLen = pBtReq->paraLength - 1; - setType = pBtReq->pParamStart[0]; - - DBG_8192C("[MPT], setType=%d, setParaLen=%d\n", setType, setParaLen); - - // check parameter first - switch(setType) - { - case BT_GSET_REG: - DBG_8192C ("[MPT], [BT_GSET_REG]\n"); - validParaLen = 9; - if(setParaLen == validParaLen) - { - btOpcode = BT_LO_OP_WRITE_REG_VALUE; - regType = pBtReq->pParamStart[1]; - pu4Tmp = (pu4Byte)&pBtReq->pParamStart[2]; - regAddr = *pu4Tmp; - pu4Tmp = (pu4Byte)&pBtReq->pParamStart[6]; - regValue = *pu4Tmp; - DBG_8192C("[MPT], BT_GSET_REG regType=0x%x, regAddr=0x%x, regValue=0x%x!!\n", - regType, regAddr, regValue); - if(regType >= BT_REG_MAX) - { - pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - if( ((BT_REG_RF==regType)&&(regAddr>0x7f)) || - ((BT_REG_MODEM==regType)&&(regAddr>0x1ff)) || - ((BT_REG_BLUEWIZE==regType)&&(regAddr>0xfff)) || - ((BT_REG_VENDOR==regType)&&(regAddr>0xfff)) || - ((BT_REG_LE==regType)&&(regAddr>0xfff)) ) - { - pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - } - } - break; - case BT_GSET_RESET: - DBG_8192C("[MPT], [BT_GSET_RESET]\n"); - validParaLen = 0; - break; - case BT_GSET_TARGET_BD_ADDR: - DBG_8192C("[MPT], [BT_GSET_TARGET_BD_ADDR]\n"); - validParaLen = 6; - if(setParaLen == validParaLen) - { - btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_H; - if( (pBtReq->pParamStart[1]==0) && - (pBtReq->pParamStart[2]==0) && - (pBtReq->pParamStart[3]==0) && - (pBtReq->pParamStart[4]==0) && - (pBtReq->pParamStart[5]==0) && - (pBtReq->pParamStart[6]==0) ) - { - DBG_8192C("[MPT], Error!! targetBDAddr=all zero\n"); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - if( (pBtReq->pParamStart[1]==0xff) && - (pBtReq->pParamStart[2]==0xff) && - (pBtReq->pParamStart[3]==0xff) && - (pBtReq->pParamStart[4]==0xff) && - (pBtReq->pParamStart[5]==0xff) && - (pBtReq->pParamStart[6]==0xff) ) - { - DBG_8192C("[MPT], Error!! targetBDAddr=all 0xf\n"); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - bdAddr[0] = pBtReq->pParamStart[6]; - bdAddr[1] = pBtReq->pParamStart[5]; - bdAddr[2] = pBtReq->pParamStart[4]; - bdAddr[3] = pBtReq->pParamStart[3]; - bdAddr[4] = pBtReq->pParamStart[2]; - bdAddr[5] = pBtReq->pParamStart[1]; - DBG_8192C ("[MPT], target BDAddr:%x,%x,%x,%x,%x,%x\n", - bdAddr[0],bdAddr[1],bdAddr[2],bdAddr[3],bdAddr[4],bdAddr[5]); - } - break; - case BT_GSET_TX_PWR_FINETUNE: - DBG_8192C("[MPT], [BT_GSET_TX_PWR_FINETUNE]\n"); - validParaLen = 1; - if(setParaLen == validParaLen) - { - btOpcode = BT_LO_OP_SET_TX_POWER_CALIBRATION; - calVal = pBtReq->pParamStart[1]; - if( (calVal<1) || (calVal>9) ) - { - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - DBG_8192C ("[MPT], calVal=%d\n", calVal); - } - break; - case BT_SET_TRACKING_INTERVAL: - DBG_871X("[MPT], [BT_SET_TRACKING_INTERVAL] setParaLen =%d \n",setParaLen); - - validParaLen = 1; - if(setParaLen == validParaLen) - calVal = pBtReq->pParamStart[1]; - break; - case BT_SET_THERMAL_METER: - DBG_871X("[MPT], [BT_SET_THERMAL_METER] setParaLen =%d \n",setParaLen); - validParaLen = 1; - if(setParaLen == validParaLen) - calVal = pBtReq->pParamStart[1]; - break; - case BT_ENABLE_CFO_TRACKING: - DBG_871X("[MPT], [BT_ENABLE_CFO_TRACKING] setParaLen =%d \n",setParaLen); - validParaLen = 1; - if(setParaLen == validParaLen) - calVal = pBtReq->pParamStart[1]; - break; - case BT_GSET_UPDATE_BT_PATCH: - if(IS_HARDWARE_TYPE_8723AE(Adapter) && Adapter->bFWReady) - { - u1Byte i; - DBG_8192C ("[MPT], write regs for load patch\n"); - //BTFwPatch8723A(Adapter); - PlatformEFIOWrite1Byte(Adapter, 0xCC, 0x2d); - rtw_msleep_os(50); - PlatformEFIOWrite4Byte(Adapter, 0x68, 0xa005000c); - rtw_msleep_os(50); - PlatformEFIOWrite4Byte(Adapter, 0x68, 0xb005000c); - rtw_msleep_os(50); - PlatformEFIOWrite1Byte(Adapter, 0xCC, 0x29); - for(i=0; i<12; i++) - rtw_msleep_os(100); -//#if (DEV_BUS_TYPE == RT_PCI_INTERFACE) -// BTFwPatch8723A(Adapter); -//#endif - DBG_8192C("[MPT], load BT FW Patch finished!!!\n"); - } - break; - default: - { - DBG_8192C ("[MPT], Error!! setType=%d, out of range\n", setType); - pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - break; - } - if(setParaLen != validParaLen) - { - DBG_8192C("[MPT], Error!! wrong parameter length=%d for BT_SET_GEN_CMD cmd id=0x%x, paraLen should=0x%x\n", - setParaLen, setType, validParaLen); - pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U; - return paraLen; - } - - // - // execute lower layer opcodes - // - if(BT_GSET_REG == setType) - { - // fill h2c parameters - // here we should write reg value first then write the address, adviced by Austin - btOpcode = BT_LO_OP_WRITE_REG_VALUE; - h2cParaBuf[0] = pBtReq->pParamStart[6]; - h2cParaBuf[1] = pBtReq->pParamStart[7]; - h2cParaBuf[2] = pBtReq->pParamStart[8]; - h2cParaLen = 3; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - // write reg address - btOpcode = BT_LO_OP_WRITE_REG_ADDR; - h2cParaBuf[0] = regType; - h2cParaBuf[1] = pBtReq->pParamStart[2]; - h2cParaBuf[2] = pBtReq->pParamStart[3]; - h2cParaLen = 3; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - } - else if(BT_GSET_RESET == setType) - { - btOpcode = BT_LO_OP_RESET; - h2cParaLen = 0; - // execute h2c and check respond c2h from bt fw is correct or not - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - } - else if(BT_GSET_TARGET_BD_ADDR == setType) - { - // fill h2c parameters - btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_L; - h2cParaBuf[0] = pBtReq->pParamStart[1]; - h2cParaBuf[1] = pBtReq->pParamStart[2]; - h2cParaBuf[2] = pBtReq->pParamStart[3]; - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_H; - h2cParaBuf[0] = pBtReq->pParamStart[4]; - h2cParaBuf[1] = pBtReq->pParamStart[5]; - h2cParaBuf[2] = pBtReq->pParamStart[6]; - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - } - else if(BT_GSET_TX_PWR_FINETUNE == setType) - { - // fill h2c parameters - btOpcode = BT_LO_OP_SET_TX_POWER_CALIBRATION; - h2cParaBuf[0] = calVal; - h2cParaLen = 1; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - } - else if(BT_SET_TRACKING_INTERVAL == setType) - { - // BT_LO_OP_SET_TRACKING_INTERVAL = 0x22, - // BT_LO_OP_SET_THERMAL_METER = 0x23, - // BT_LO_OP_ENABLE_CFO_TRACKING = 0x24, - btOpcode = BT_LO_OP_SET_TRACKING_INTERVAL; - h2cParaBuf[0] = calVal; - h2cParaLen = 1; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - } - else if(BT_SET_THERMAL_METER == setType) - { - btOpcode = BT_LO_OP_SET_THERMAL_METER; - h2cParaBuf[0] = calVal; - h2cParaLen = 1; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - } - else if(BT_ENABLE_CFO_TRACKING == setType) - { - btOpcode = BT_LO_OP_ENABLE_CFO_TRACKING; - h2cParaBuf[0] = calVal; - h2cParaLen = 1; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - } - - pBtRsp->status = BT_STATUS_SUCCESS; - return paraLen; -} - - - -u2Byte -mptbt_BtSetTxRxPars( - IN PADAPTER Adapter, - IN PBT_REQ_CMD pBtReq, - IN PBT_RSP_CMD pBtRsp - ) -{ - u1Byte h2cParaBuf[6] ={0}; - u1Byte h2cParaLen=0; - u2Byte paraLen=0; - u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS; - u1Byte btOpcode; - u1Byte btOpcodeVer=0; - PBT_TXRX_PARAMETERS pTxRxPars=(PBT_TXRX_PARAMETERS)&pBtReq->pParamStart[0]; - u2Byte lenTxRx=sizeof(BT_TXRX_PARAMETERS); - u1Byte i; - u1Byte bdAddr[6]={0}; - - // - // check upper layer parameters - // - - // 1. check upper layer opcode version - if(pBtReq->opCodeVer != 1) - { - DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n"); - pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH; - return paraLen; - } - // 2. check upper layer parameter length - if(pBtReq->paraLength == sizeof(BT_TXRX_PARAMETERS)) - { - DBG_8192C ("[MPT], pTxRxPars->txrxChannel=0x%x \n", pTxRxPars->txrxChannel); - DBG_8192C ("[MPT], pTxRxPars->txrxTxPktCnt=0x%8x \n", pTxRxPars->txrxTxPktCnt); - DBG_8192C ("[MPT], pTxRxPars->txrxTxPktInterval=0x%x \n", pTxRxPars->txrxTxPktInterval); - DBG_8192C ("[MPT], pTxRxPars->txrxPayloadType=0x%x \n", pTxRxPars->txrxPayloadType); - DBG_8192C ("[MPT], pTxRxPars->txrxPktType=0x%x \n", pTxRxPars->txrxPktType); - DBG_8192C ("[MPT], pTxRxPars->txrxPayloadLen=0x%x \n", pTxRxPars->txrxPayloadLen); - DBG_8192C ("[MPT], pTxRxPars->txrxPktHeader=0x%x \n", pTxRxPars->txrxPktHeader); - DBG_8192C ("[MPT], pTxRxPars->txrxWhitenCoeff=0x%x \n", pTxRxPars->txrxWhitenCoeff); - bdAddr[0] = pTxRxPars->txrxBdaddr[5]; - bdAddr[1] = pTxRxPars->txrxBdaddr[4]; - bdAddr[2] = pTxRxPars->txrxBdaddr[3]; - bdAddr[3] = pTxRxPars->txrxBdaddr[2]; - bdAddr[4] = pTxRxPars->txrxBdaddr[1]; - bdAddr[5] = pTxRxPars->txrxBdaddr[0]; - DBG_8192C ("[MPT], pTxRxPars->txrxBdaddr: %s", &bdAddr[0]); - DBG_8192C ("[MPT], pTxRxPars->txrxTxGainIndex=0x%x \n", pTxRxPars->txrxTxGainIndex); - } - else - { - DBG_8192C ("[MPT], Error!! pBtReq->paraLength=%d, correct Len=%d\n", pBtReq->paraLength, lenTxRx); - pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U; - return paraLen; - } - - // - // execute lower layer opcodes - // - - // fill h2c parameters - btOpcode = BT_LO_OP_SET_PKT_HEADER; - if(pTxRxPars->txrxPktHeader > 0x3ffff) - { - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxPktHeader=0x%x is out of range, (should be between 0x0~0x3ffff)\n", pTxRxPars->txrxPktHeader); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - h2cParaBuf[0] = (u1Byte)(pTxRxPars->txrxPktHeader&0xff); - h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxPktHeader&0xff00)>>8); - h2cParaBuf[2] = (u1Byte)((pTxRxPars->txrxPktHeader&0xff0000)>>16); - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - // fill h2c parameters - btOpcode = BT_LO_OP_SET_PKT_TYPE_LEN; - { - u2Byte payloadLenLimit=0; - switch(pTxRxPars->txrxPktType) - { - case MP_BT_PKT_DH1: - payloadLenLimit = 27*8; - break; - case MP_BT_PKT_DH3: - payloadLenLimit = 183*8; - break; - case MP_BT_PKT_DH5: - payloadLenLimit = 339*8; - break; - case MP_BT_PKT_2DH1: - payloadLenLimit = 54*8; - break; - case MP_BT_PKT_2DH3: - payloadLenLimit = 367*8; - break; - case MP_BT_PKT_2DH5: - payloadLenLimit = 679*8; - break; - case MP_BT_PKT_3DH1: - payloadLenLimit = 83*8; - break; - case MP_BT_PKT_3DH3: - payloadLenLimit = 552*8; - break; - case MP_BT_PKT_3DH5: - payloadLenLimit = 1021*8; - break; - case MP_BT_PKT_LE: - payloadLenLimit = 39*8; - break; - default: - { - DBG_8192C ("[MPT], Error!! Unknown pTxRxPars->txrxPktType=0x%x\n", pTxRxPars->txrxPktType); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - break; - } - - if(pTxRxPars->txrxPayloadLen > payloadLenLimit) - { - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxPayloadLen=0x%x, (should smaller than %d)\n", - pTxRxPars->txrxPayloadLen, payloadLenLimit); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - - h2cParaBuf[0] = pTxRxPars->txrxPktType; - h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxPayloadLen&0xff)); - h2cParaBuf[2] = (u1Byte)((pTxRxPars->txrxPayloadLen&0xff00)>>8); - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - // fill h2c parameters - btOpcode = BT_LO_OP_SET_PKT_CNT_L_PL_TYPE; - if(pTxRxPars->txrxPayloadType > MP_BT_PAYLOAD_MAX) - { - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxPayloadType=0x%x, (should be between 0~4)\n", pTxRxPars->txrxPayloadType); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - h2cParaBuf[0] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff)); - h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff00)>>8); - h2cParaBuf[2] = pTxRxPars->txrxPayloadType; - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - // fill h2c parameters - btOpcode = BT_LO_OP_SET_PKT_CNT_H_PKT_INTV; - if(pTxRxPars->txrxTxPktInterval > 15) - { - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxTxPktInterval=0x%x, (should be between 0~15)\n", pTxRxPars->txrxTxPktInterval); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - h2cParaBuf[0] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff0000)>>16); - h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff000000)>>24); - h2cParaBuf[2] = pTxRxPars->txrxTxPktInterval; - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - // fill h2c parameters - btOpcode = BT_LO_OP_SET_WHITENCOEFF; - { - h2cParaBuf[0] = pTxRxPars->txrxWhitenCoeff; - h2cParaLen = 1; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - - // fill h2c parameters - btOpcode = BT_LO_OP_SET_CHNL_TX_GAIN; - if( (pTxRxPars->txrxChannel > 78) || - (pTxRxPars->txrxTxGainIndex > 7) ) - { - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxChannel=0x%x, (should be between 0~78)\n", pTxRxPars->txrxChannel); - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxTxGainIndex=0x%x, (should be between 0~7)\n", pTxRxPars->txrxTxGainIndex); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - h2cParaBuf[0] = pTxRxPars->txrxChannel; - h2cParaBuf[1] = pTxRxPars->txrxTxGainIndex; - h2cParaLen = 2; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - // fill h2c parameters - btOpcode = BT_LO_OP_SET_BD_ADDR_L; - if( (pTxRxPars->txrxBdaddr[0]==0) && - (pTxRxPars->txrxBdaddr[1]==0) && - (pTxRxPars->txrxBdaddr[2]==0) && - (pTxRxPars->txrxBdaddr[3]==0) && - (pTxRxPars->txrxBdaddr[4]==0) && - (pTxRxPars->txrxBdaddr[5]==0) ) - { - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxBdaddr=all zero\n"); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - if( (pTxRxPars->txrxBdaddr[0]==0xff) && - (pTxRxPars->txrxBdaddr[1]==0xff) && - (pTxRxPars->txrxBdaddr[2]==0xff) && - (pTxRxPars->txrxBdaddr[3]==0xff) && - (pTxRxPars->txrxBdaddr[4]==0xff) && - (pTxRxPars->txrxBdaddr[5]==0xff) ) - { - DBG_8192C ("[MPT], Error!! pTxRxPars->txrxBdaddr=all 0xf\n"); - pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - - { - h2cParaBuf[0] = pTxRxPars->txrxBdaddr[0]; - h2cParaBuf[1] = pTxRxPars->txrxBdaddr[1]; - h2cParaBuf[2] = pTxRxPars->txrxBdaddr[2]; - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - btOpcode = BT_LO_OP_SET_BD_ADDR_H; - { - h2cParaBuf[0] = pTxRxPars->txrxBdaddr[3]; - h2cParaBuf[1] = pTxRxPars->txrxBdaddr[4]; - h2cParaBuf[2] = pTxRxPars->txrxBdaddr[5]; - h2cParaLen = 3; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - // ckeck bt return status. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - pBtRsp->status = BT_STATUS_SUCCESS; - return paraLen; -} - - - -u2Byte -mptbt_BtTestCtrl( - IN PADAPTER Adapter, - IN PBT_REQ_CMD pBtReq, - IN PBT_RSP_CMD pBtRsp - ) -{ - u1Byte h2cParaBuf[6] ={0}; - u1Byte h2cParaLen=0; - u2Byte paraLen=0; - u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS; - u1Byte btOpcode; - u1Byte btOpcodeVer=0; - u1Byte testCtrl=0; - - // - // check upper layer parameters - // - - // 1. check upper layer opcode version - if(pBtReq->opCodeVer != 1) - { - DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n"); - pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH; - return paraLen; - } - // 2. check upper layer parameter length - if(1 == pBtReq->paraLength) - { - testCtrl = pBtReq->pParamStart[0]; - DBG_8192C("[MPT], testCtrl=%d \n", testCtrl); - } - else - { - DBG_8192C("[MPT], Error!! wrong parameter length=%d (should be 1)\n", pBtReq->paraLength); - pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U; - return paraLen; - } - - // - // execute lower layer opcodes - // - - // 1. fill h2c parameters - // check bt mode - btOpcode = BT_LO_OP_TEST_CTRL; - if(testCtrl >= MP_BT_TEST_MAX) - { - DBG_8192C("[MPT], Error!! testCtrl=0x%x, (should be between smaller or equal to 0x%x)\n", - testCtrl, MP_BT_TEST_MAX-1); - pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U; - return paraLen; - } - else - { - h2cParaBuf[0] = testCtrl; - h2cParaLen = 1; - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - } - - // 3. construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - pBtRsp->status = BT_STATUS_SUCCESS; - return paraLen; -} - - -u2Byte -mptbt_TestBT( - IN PADAPTER Adapter, - IN PBT_REQ_CMD pBtReq, - IN PBT_RSP_CMD pBtRsp - ) -{ - - u1Byte h2cParaBuf[6] ={0}; - u1Byte h2cParaLen=0; - u2Byte paraLen=0; - u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS; - u1Byte btOpcode; - u1Byte btOpcodeVer=0; - u1Byte testCtrl=0; - - // 1. fill h2c parameters - btOpcode = 0x11; - h2cParaBuf[0] = 0x11; - h2cParaBuf[1] = 0x0; - h2cParaBuf[2] = 0x0; - h2cParaBuf[3] = 0x0; - h2cParaBuf[4] = 0x0; - h2cParaLen = 1; - // retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen); - retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, h2cParaBuf, h2cParaLen); - - - // 3. construct respond status code and data. - if(BT_STATUS_BT_OP_SUCCESS != retStatus) - { - pBtRsp->status = ((btOpcode<<8)|retStatus); - DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status); - return paraLen; - } - - pBtRsp->status = BT_STATUS_SUCCESS; - return paraLen; -} - -VOID -mptbt_BtControlProcess( - PADAPTER Adapter, - PVOID pInBuf - ) -{ - u1Byte H2C_Parameter[6] ={0}; - PBT_H2C pH2c=(PBT_H2C)&H2C_Parameter[0]; - PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx); - PBT_REQ_CMD pBtReq=(PBT_REQ_CMD)pInBuf; - PBT_RSP_CMD pBtRsp=(PBT_RSP_CMD)&pMptCtx->mptOutBuf[0]; - u1Byte i; - - DBG_8192C("[MPT], mptbt_BtControlProcess()=========>\n"); - - DBG_8192C("[MPT], input opCodeVer=%d\n", pBtReq->opCodeVer); - DBG_8192C("[MPT], input OpCode=%d\n", pBtReq->OpCode); - DBG_8192C("[MPT], paraLength=%d \n", pBtReq->paraLength); - if(pBtReq->paraLength) - { - //DBG_8192C("[MPT], parameters(hex):0x%x %d \n",&pBtReq->pParamStart[0], pBtReq->paraLength); - } - - // The following we should maintain the User OP codes sent by upper layer - - pBtRsp->status = BT_STATUS_SUCCESS; - pMptCtx->mptOutLen = 4; //length of (BT_RSP_CMD.status+BT_RSP_CMD.paraLength) - pBtRsp->paraLength = 0x0; - - _rtw_memset((PVOID)&pMptCtx->mptOutBuf[0], '\0',100); - - switch(pBtReq->OpCode) - { - case BT_UP_OP_BT_READY: - DBG_8192C("[MPT], OPcode : [BT_READY]\n"); - pBtRsp->paraLength = mptbt_BtReady(Adapter, pBtReq, pBtRsp); - break; - case BT_UP_OP_BT_SET_MODE: - DBG_8192C("[MPT], OPcode : [BT_SET_MODE]\n"); - pBtRsp->paraLength = mptbt_BtSetMode(Adapter, pBtReq, pBtRsp); - break; - case BT_UP_OP_BT_SET_TX_RX_PARAMETER: - DBG_8192C("[MPT], OPcode : [BT_SET_TXRX_PARAMETER]\n"); - pBtRsp->paraLength = mptbt_BtSetTxRxPars(Adapter, pBtReq, pBtRsp); - break; - case BT_UP_OP_BT_SET_GENERAL: - DBG_8192C("[MPT], OPcode : [BT_SET_GENERAL]\n"); - pBtRsp->paraLength = mptbt_BtSetGeneral(Adapter, pBtReq, pBtRsp); - break; - case BT_UP_OP_BT_GET_GENERAL: - DBG_8192C("[MPT], OPcode : [BT_GET_GENERAL]\n"); - pBtRsp->paraLength = mptbt_BtGetGeneral(Adapter, pBtReq, pBtRsp); - break; - case BT_UP_OP_BT_TEST_CTRL: - DBG_8192C("[MPT], OPcode : [BT_TEST_CTRL]\n"); - pBtRsp->paraLength = mptbt_BtTestCtrl(Adapter, pBtReq, pBtRsp); - break; - case BT_UP_OP_TEST_BT: - DBG_8192C("[MPT], OPcode : [TEST_BT]\n"); - pBtRsp->paraLength = mptbt_TestBT(Adapter, pBtReq, pBtRsp); - break; - default: - DBG_8192C("[MPT], Error!! OPcode : UNDEFINED!!!!\n"); - pBtRsp->status = BT_STATUS_UNKNOWN_OPCODE_U; - pBtRsp->paraLength = 0x0; - break; - } - - DBG_8192C("pBtRsp->paraLength =%d \n",pBtRsp->paraLength); - - pMptCtx->mptOutLen += pBtRsp->paraLength; - - DBG_8192C("\n [MPT], OUT to DLL pMptCtx->mptOutLen=%d ,pBtRsp->paraLength =%d ",pMptCtx->mptOutLen,pBtRsp->paraLength); - - DBG_8192C("\n [MPT], mptbt_BtControlProcess()<=========\n"); -} - -#endif - +/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+
+#include "rtw_bt_mp.h"
+#include <drv_types.h>
+#include <rtl8723a_hal.h>
+
+#ifdef CONFIG_RTL8723A
+
+void MPh2c_timeout_handle(void *FunctionContext)
+{
+ _adapter *pAdapter = (_adapter *)FunctionContext;
+ PMPT_CONTEXT pMptCtx=&pAdapter->mppriv.MptCtx;
+
+ DBG_8192C("[MPT], MPh2c_timeout_handle \n");
+
+ pMptCtx->bMPh2c_timeout=_TRUE;
+
+ _rtw_up_sema(&pMptCtx->MPh2c_Sema);
+
+ //_cancel_timer_ex( &pMptCtx->MPh2c_timeout_timer);
+
+ return;
+}
+u32 WaitC2Hevent( PADAPTER pAdapter,BOOLEAN *C2H_event ,u32 delay_time)
+{
+ PMPT_CONTEXT pMptCtx=&(pAdapter->mppriv.MptCtx);
+ pMptCtx->bMPh2c_timeout=_FALSE;
+ DBG_8192C("WaitC2Hevent _set_timer \n");
+ _set_timer( &pMptCtx->MPh2c_timeout_timer, delay_time );
+
+ _rtw_down_sema(&pMptCtx->MPh2c_Sema);
+
+ if( pMptCtx->bMPh2c_timeout == _TRUE )
+ {
+ C2H_event =_FALSE;
+ DBG_8192C("WaitC2Hevent bMPh2c_timeout _TRUE \n");
+ return _FALSE;
+ }
+
+ return _TRUE;
+
+}
+
+BT_CTRL_STATUS
+mptbt_CheckC2hFrame(
+ PADAPTER Adapter,
+ PBT_H2C pH2c,
+ PBT_EXT_C2H pExtC2h
+ )
+{
+ BT_CTRL_STATUS c2hStatus = BT_STATUS_C2H_SUCCESS;
+
+ //DBG_8192C("[MPT], MPT rsp C2H hex: %x %x %x %x %x %x \n"), pExtC2h , pExtC2h+1 ,pExtC2h+2 ,pExtC2h+3 ,pExtC2h+4 ,pExtC2h+5);
+
+ DBG_8192C("[MPT], statusCode = 0x%x\n", pExtC2h->statusCode);
+ DBG_8192C("[MPT], retLen = %d\n", pExtC2h->retLen);
+ DBG_8192C("[MPT], opCodeVer : req/rsp=%d/%d\n", pH2c->opCodeVer, pExtC2h->opCodeVer);
+ DBG_8192C("[MPT], reqNum : req/rsp=%d/%d\n", pH2c->reqNum, pExtC2h->reqNum);
+ if(pExtC2h->reqNum != pH2c->reqNum)
+ {
+ c2hStatus = BT_STATUS_C2H_REQNUM_MISMATCH;
+ DBG_8192C("[MPT], Error!! C2H reqNum Mismatch!!\n");
+ }
+ else if(pExtC2h->opCodeVer != pH2c->opCodeVer)
+ {
+ c2hStatus = BT_STATUS_OPCODE_L_VERSION_MISMATCH;
+ DBG_8192C("[MPT], Error!! OPCode version L mismatch!!\n");
+ }
+
+ return c2hStatus;
+}
+
+extern s32 FillH2CCmd(PADAPTER padapter, u8 ElementID, u32 CmdLen, u8 *pCmdBuffer);
+
+BT_CTRL_STATUS
+mptbt_SendH2c(
+ PADAPTER Adapter,
+ PBT_H2C pH2c,
+ u2Byte h2cCmdLen
+ )
+{
+ //KIRQL OldIrql = KeGetCurrentIrql();
+ BT_CTRL_STATUS h2cStatus=BT_STATUS_H2C_SUCCESS;
+ PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx);
+ u1Byte i;
+
+ DBG_8192C("[MPT], mptbt_SendH2c()=========>\n");
+
+ //PlatformResetEvent(&pMptCtx->MptH2cRspEvent);
+ //PlatformResetEvent(&pMptCtx->MptBtC2hEvent);
+
+// if(OldIrql == PASSIVE_LEVEL)
+// {
+ //RTPRINT_DATA(FMPBT, FMPBT_H2C_CONTENT, ("[MPT], MPT H2C hex: \n"), pH2c, h2cCmdLen);
+
+ for(i=0; i<BT_H2C_MAX_RETRY; i++)
+ {
+ DBG_8192C("[MPT], Send H2C command to wifi!!!\n");
+ FillH2CCmd(Adapter, 70, h2cCmdLen, (pu1Byte)pH2c);
+ pMptCtx->h2cReqNum++;
+ pMptCtx->h2cReqNum %= 16;
+
+ if(WaitC2Hevent(Adapter, &pMptCtx->MptH2cRspEvent, 200))
+ {
+ DBG_8192C("[MPT], Received WiFi MptH2cRspEvent!!!\n");
+ if(WaitC2Hevent(Adapter, &pMptCtx->MptBtC2hEvent, 800))
+ {
+ DBG_8192C("[MPT], Received BT MptBtC2hEvent!!!\n");
+ break;
+ }
+ else
+ {
+ DBG_8192C("[MPT], Error!!BT MptBtC2hEvent timeout!!\n");
+ h2cStatus = BT_STATUS_H2C_BT_NO_RSP;
+ }
+ }
+ else
+ {
+ DBG_8192C("[MPT], Error!!WiFi MptH2cRspEvent timeout!!\n");
+ h2cStatus = BT_STATUS_H2C_TIMTOUT;
+ }
+ }
+// }
+// else
+// {
+// RT_ASSERT(FALSE, ("[MPT], mptbt_SendH2c() can only run under PASSIVE_LEVEL!!\n"));
+// h2cStatus = BT_STATUS_WRONG_LEVEL;
+// }
+
+ DBG_8192C("[MPT], mptbt_SendH2c()<=========\n");
+ return h2cStatus;
+}
+
+
+
+BT_CTRL_STATUS
+mptbt_CheckBtRspStatus(
+ PADAPTER Adapter,
+ PBT_EXT_C2H pExtC2h
+ )
+{
+ BT_CTRL_STATUS retStatus=BT_OP_STATUS_SUCCESS;
+
+ switch(pExtC2h->statusCode)
+ {
+ case BT_OP_STATUS_SUCCESS:
+ retStatus = BT_STATUS_BT_OP_SUCCESS;
+ DBG_8192C("[MPT], BT status : BT_STATUS_SUCCESS\n");
+ break;
+ case BT_OP_STATUS_VERSION_MISMATCH:
+ retStatus = BT_STATUS_OPCODE_L_VERSION_MISMATCH;
+ DBG_8192C("[MPT], BT status : BT_STATUS_OPCODE_L_VERSION_MISMATCH\n");
+ break;
+ case BT_OP_STATUS_UNKNOWN_OPCODE:
+ retStatus = BT_STATUS_UNKNOWN_OPCODE_L;
+ DBG_8192C("[MPT], BT status : BT_STATUS_UNKNOWN_OPCODE_L\n");
+ break;
+ case BT_OP_STATUS_ERROR_PARAMETER:
+ retStatus = BT_STATUS_PARAMETER_FORMAT_ERROR_L;
+ DBG_8192C("[MPT], BT status : BT_STATUS_PARAMETER_FORMAT_ERROR_L\n");
+ break;
+ default:
+ retStatus = BT_STATUS_UNKNOWN_STATUS_L;
+ DBG_8192C("[MPT], BT status : BT_STATUS_UNKNOWN_STATUS_L\n");
+ break;
+ }
+
+ return retStatus;
+}
+
+
+
+BT_CTRL_STATUS
+mptbt_BtFwOpCodeProcess(
+ PADAPTER Adapter,
+ u1Byte btFwOpCode,
+ u1Byte opCodeVer,
+ pu1Byte pH2cPar,
+ u1Byte h2cParaLen
+ )
+{
+ u1Byte H2C_Parameter[6] ={0};
+ PBT_H2C pH2c=(PBT_H2C)&H2C_Parameter[0];
+ PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx);
+ PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)&pMptCtx->c2hBuf[0];
+ u2Byte paraLen=0,i;
+ BT_CTRL_STATUS h2cStatus=BT_STATUS_H2C_SUCCESS, c2hStatus=BT_STATUS_C2H_SUCCESS;
+ BT_CTRL_STATUS retStatus=BT_STATUS_H2C_BT_NO_RSP;
+
+ pH2c->opCode = btFwOpCode;
+ pH2c->opCodeVer = opCodeVer;
+ pH2c->reqNum = pMptCtx->h2cReqNum;
+ //PlatformMoveMemory(&pH2c->buf[0], pH2cPar, h2cParaLen);
+ //_rtw_memcpy(&pH2c->buf[0], pH2cPar, h2cParaLen);
+ _rtw_memcpy(pH2c->buf, pH2cPar, h2cParaLen);
+
+ DBG_8192C("[MPT], pH2c->opCode=%d\n", pH2c->opCode);
+ DBG_8192C("[MPT], pH2c->opCodeVer=%d\n", pH2c->opCodeVer);
+ DBG_8192C("[MPT], pH2c->reqNum=%d\n", pH2c->reqNum);
+ DBG_8192C("[MPT], h2c parameter length=%d\n", h2cParaLen);
+ if(h2cParaLen)
+ {
+ DBG_8192C("[MPT], parameters(hex): \n");
+ for(i=0;i<h2cParaLen;i++)
+ {
+ DBG_8192C(" 0x%x \n", pH2c->buf[i]);
+ }
+ }
+
+ h2cStatus = mptbt_SendH2c(Adapter, pH2c, h2cParaLen+2);
+ if(BT_STATUS_H2C_SUCCESS == h2cStatus)
+ {
+ // if reach here, it means H2C get the correct c2h response,
+ c2hStatus = mptbt_CheckC2hFrame(Adapter, pH2c, pExtC2h);
+ if(BT_STATUS_C2H_SUCCESS == c2hStatus)
+ {
+ retStatus = mptbt_CheckBtRspStatus(Adapter, pExtC2h);
+ }
+ else
+ {
+ DBG_8192C("[MPT], Error!! C2H failed for pH2c->opCode=%d\n", pH2c->opCode);
+ // check c2h status error, return error status code to upper layer.
+ retStatus = c2hStatus;
+ }
+ }
+ else
+ {
+ DBG_8192C("[MPT], Error!! H2C failed for pH2c->opCode=%d\n", pH2c->opCode);
+ // check h2c status error, return error status code to upper layer.
+ retStatus = h2cStatus;
+ }
+
+ return retStatus;
+}
+
+
+
+
+u2Byte
+mptbt_BtReady(
+ PADAPTER Adapter,
+ PBT_REQ_CMD pBtReq,
+ PBT_RSP_CMD pBtRsp
+ )
+{
+ u1Byte h2cParaBuf[6] ={0};
+ u1Byte h2cParaLen=0;
+ u2Byte paraLen=0;
+ u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS;
+ u1Byte btOpcode;
+ u1Byte btOpcodeVer=0;
+ PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx);
+ PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)&pMptCtx->c2hBuf[0];
+ u1Byte i;
+ u1Byte btFwVer=0, bdAddr[6]={0};
+ u2Byte btRealFwVer=0;
+ pu2Byte pu2Tmp=NULL;
+
+ //
+ // check upper layer parameters
+ //
+
+ // 1. check upper layer opcode version
+ if(pBtReq->opCodeVer != 1)
+ {
+ DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n");
+ pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
+ return paraLen;
+ }
+
+ pBtRsp->pParamStart[0] = MP_BT_NOT_READY;
+ paraLen = 10;
+ //
+ // execute lower layer opcodes
+ //
+
+ // Get BT FW version
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_GET_BT_VERSION;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ else
+ {
+ pu2Tmp = (pu2Byte)&pExtC2h->buf[0];
+ btRealFwVer = *pu2Tmp;
+ btFwVer = pExtC2h->buf[1];
+ DBG_8192C("[MPT], btRealFwVer=0x%x, btFwVer=0x%x\n", btRealFwVer, btFwVer);
+ }
+
+ // Get BD Address
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_GET_BD_ADDR_L;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ else
+ {
+ bdAddr[5] = pExtC2h->buf[0];
+ bdAddr[4] = pExtC2h->buf[1];
+ bdAddr[3] = pExtC2h->buf[2];
+ }
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_GET_BD_ADDR_H;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ else
+ {
+ bdAddr[2] = pExtC2h->buf[0];
+ bdAddr[1] = pExtC2h->buf[1];
+ bdAddr[0] = pExtC2h->buf[2];
+ }
+ DBG_8192C("[MPT], Local BDAddr:");
+ for(i=0; i<6; i++)
+ {
+ DBG_8192C(" 0x%x ", bdAddr[i]);
+ }
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ pBtRsp->pParamStart[0] = MP_BT_READY;
+ pu2Tmp = (pu2Byte)&pBtRsp->pParamStart[1];
+ *pu2Tmp = btRealFwVer;
+ pBtRsp->pParamStart[3] = btFwVer;
+ for(i=0; i<6; i++)
+ {
+ pBtRsp->pParamStart[4+i] = bdAddr[5-i];
+ }
+
+ return paraLen;
+}
+
+void mptbt_close_WiFiRF(PADAPTER Adapter)
+{
+ PHY_SetBBReg(Adapter, 0x824, 0xF, 0x0);
+ PHY_SetBBReg(Adapter, 0x824, 0x700000, 0x0);
+ PHY_SetRFReg(Adapter, RF90_PATH_A, 0x0, 0xF0000, 0x0);
+}
+
+void mptbt_open_WiFiRF(PADAPTER Adapter)
+{
+ PHY_SetBBReg(Adapter, 0x824, 0x700000, 0x3);
+ PHY_SetBBReg(Adapter, 0x824, 0xF, 0x2);
+ PHY_SetRFReg(Adapter, RF90_PATH_A, 0x0, 0xF0000, 0x3);
+}
+
+u4Byte mptbt_switch_RF(PADAPTER Adapter, u1Byte Enter)
+{
+ u2Byte tmp_2byte = 0;
+
+ //Enter test mode
+ if (Enter) {
+ ////1>. close WiFi RF
+ mptbt_close_WiFiRF(Adapter);
+
+ ////2>. change ant switch to BT
+ tmp_2byte = rtw_read16(Adapter, 0x860);
+ tmp_2byte = tmp_2byte | BIT(9);
+ tmp_2byte = tmp_2byte & (~BIT(8));
+ rtw_write16(Adapter, 0x860, tmp_2byte);
+ rtw_write16(Adapter, 0x870, 0x300);
+ } else {
+ ////1>. Open WiFi RF
+ mptbt_open_WiFiRF(Adapter);
+
+ ////2>. change ant switch back
+ tmp_2byte = rtw_read16(Adapter, 0x860);
+ tmp_2byte = tmp_2byte | BIT(8);
+ tmp_2byte = tmp_2byte & (~BIT(9));
+ rtw_write16(Adapter, 0x860, tmp_2byte);
+ rtw_write16(Adapter, 0x870, 0x300);
+ }
+
+ return 0;
+}
+
+u2Byte
+mptbt_BtSetMode(
+ PADAPTER Adapter,
+ PBT_REQ_CMD pBtReq,
+ PBT_RSP_CMD pBtRsp
+ )
+{
+ u1Byte h2cParaBuf[6] ={0};
+ u1Byte h2cParaLen=0;
+ u2Byte paraLen=0;
+ u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS;
+ u1Byte btOpcode;
+ u1Byte btOpcodeVer=0;
+ u1Byte btModeToSet=0;
+
+ //
+ // check upper layer parameters
+ //
+ // 1. check upper layer opcode version
+ if(pBtReq->opCodeVer != 1)
+ {
+ DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n");
+ pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
+ return paraLen;
+ }
+ // 2. check upper layer parameter length
+ if(1 == pBtReq->paraLength)
+ {
+ btModeToSet = pBtReq->pParamStart[0];
+ DBG_8192C("[MPT], BtTestMode=%d \n", btModeToSet);
+ }
+ else
+ {
+ DBG_8192C("[MPT], Error!! wrong parameter length=%d (should be 1)\n", pBtReq->paraLength);
+ pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
+ return paraLen;
+ }
+
+ //
+ // execute lower layer opcodes
+ //
+
+ // 1. fill h2c parameters
+ // check bt mode
+ btOpcode = BT_LO_OP_SET_BT_MODE;
+ if(btModeToSet >= MP_BT_MODE_MAX)
+ {
+ pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ mptbt_switch_RF(Adapter, 1);
+
+ h2cParaBuf[0] = btModeToSet;
+ h2cParaLen = 1;
+ // 2. execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // 3. construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS == retStatus)
+ {
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ }
+ else
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ }
+
+ return paraLen;
+}
+
+
+VOID
+MPTBT_FwC2hBtMpCtrl(
+ PADAPTER Adapter,
+ pu1Byte tmpBuf,
+ u1Byte length
+ )
+{
+ u32 i;
+ PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx);
+ PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)tmpBuf;
+
+ if(Adapter->bBTFWReady == _FALSE || Adapter->registrypriv.mp_mode == 0 )
+ {
+ DBG_8192C("[MPT], %s,bBTFWReady == _FALSE\n",__func__);
+ return;
+ }
+ //cancel_timeout for h2c handle
+ _cancel_timer_ex( &pMptCtx->MPh2c_timeout_timer);
+
+ DBG_8192C("[MPT], MPTBT_FwC2hBtMpCtrl(), hex: \n");
+ for(i=0;i<=length;i++)
+ {
+ //DBG_8192C("[MPT], MPTBT_FwC2hBtMpCtrl(), hex: \n",tmpBuf[i], length);
+ DBG_8192C(" 0x%x ",tmpBuf[i]);
+ }
+ DBG_8192C("\n [MPT], pExtC2h->extendId=0x%x\n", pExtC2h->extendId);
+
+ switch(pExtC2h->extendId)
+ {
+ case EXT_C2H_WIFI_FW_ACTIVE_RSP:
+ DBG_8192C("[MPT], EXT_C2H_WIFI_FW_ACTIVE_RSP\n");
+ DBG_8192C("[MPT], pExtC2h->buf hex: \n");
+ if( length > 32 || length < 3 )
+ break ;
+ for(i=0;i<=(length-3);i++)
+ DBG_8192C(" 0x%x ",pExtC2h->buf[i]);
+ //PlatformSetEvent(&pMptCtx->MptH2cRspEvent);
+ pMptCtx->MptH2cRspEvent=_TRUE;
+ _rtw_up_sema(&pMptCtx->MPh2c_Sema);
+ break;
+ case EXT_C2H_TRIG_BY_BT_FW:
+ DBG_8192C("[MPT], EXT_C2H_TRIG_BY_BT_FW\n");
+ //PlatformMoveMemory(&pMptCtx->c2hBuf[0], tmpBuf, length);
+ _rtw_memcpy(&pMptCtx->c2hBuf[0], tmpBuf, length);
+ DBG_8192C("[MPT], pExtC2h->statusCode=0x%x\n", pExtC2h->statusCode);
+ DBG_8192C("[MPT], pExtC2h->retLen=0x%x\n", pExtC2h->retLen);
+ DBG_8192C("[MPT], pExtC2h->opCodeVer=0x%x\n", pExtC2h->opCodeVer);
+ DBG_8192C("[MPT], pExtC2h->reqNum=0x%x\n", pExtC2h->reqNum);
+ DBG_8192C("[MPT], pExtC2h->buf hex: \n");
+ for(i=0;i<=(length-3);i++)
+ DBG_8192C(" 0x%x ",pExtC2h->buf[0]);
+ //PlatformSetEvent(&pMptCtx->MptBtC2hEvent);
+ pMptCtx->MptBtC2hEvent=_TRUE;
+ _rtw_up_sema(&pMptCtx->MPh2c_Sema);
+ break;
+ default:
+ DBG_8192C("[MPT], EXT_C2H Target not found,pExtC2h->extendId =%d ,pExtC2h->reqNum=%d\n",pExtC2h->extendId,pExtC2h->reqNum);
+ break;
+ }
+
+
+
+}
+
+
+u2Byte
+mptbt_BtGetGeneral(
+ IN PADAPTER Adapter,
+ IN PBT_REQ_CMD pBtReq,
+ IN PBT_RSP_CMD pBtRsp
+ )
+{
+ PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx);
+ PBT_EXT_C2H pExtC2h=(PBT_EXT_C2H)&pMptCtx->c2hBuf[0];
+ u1Byte h2cParaBuf[6] ={0};
+ u1Byte h2cParaLen=0;
+ u2Byte paraLen=0;
+ u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS;
+ u1Byte btOpcode, bdAddr[6]={0};
+ u1Byte btOpcodeVer=0;
+ u1Byte getType=0, i;
+ u2Byte getParaLen=0, validParaLen=0;
+ u1Byte regType=0, reportType=0;
+ u4Byte regAddr=0, regValue=0;
+ pu4Byte pu4Tmp;
+ pu2Byte pu2Tmp;
+ pu1Byte pu1Tmp;
+
+ //
+ // check upper layer parameters
+ //
+
+ // check upper layer opcode version
+ if(pBtReq->opCodeVer != 1)
+ {
+ DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n");
+ pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
+ return paraLen;
+ }
+ // check upper layer parameter length
+ if(pBtReq->paraLength < 1)
+ {
+ DBG_8192C("[MPT], Error!! wrong parameter length=%d (should larger than 1)\n", pBtReq->paraLength);
+ pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
+ return paraLen;
+ }
+ getParaLen = pBtReq->paraLength - 1;
+ getType = pBtReq->pParamStart[0];
+
+ DBG_8192C("[MPT], getType=%d, getParaLen=%d\n", getType, getParaLen);
+
+ // check parameter first
+ switch(getType)
+ {
+ case BT_GGET_REG:
+ DBG_8192C("[MPT], [BT_GGET_REG]\n");
+ validParaLen = 5;
+ if(getParaLen == validParaLen)
+ {
+ btOpcode = BT_LO_OP_READ_REG;
+ regType = pBtReq->pParamStart[1];
+ pu4Tmp = (pu4Byte)&pBtReq->pParamStart[2];
+ regAddr = *pu4Tmp;
+ DBG_8192C("[MPT], BT_GGET_REG regType=0x%x, regAddr=0x%x!!\n",
+ regType, regAddr);
+ if(regType >= BT_REG_MAX)
+ {
+ pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ if( ((BT_REG_RF==regType)&&(regAddr>0x7f)) ||
+ ((BT_REG_MODEM==regType)&&(regAddr>0x1ff)) ||
+ ((BT_REG_BLUEWIZE==regType)&&(regAddr>0xfff)) ||
+ ((BT_REG_VENDOR==regType)&&(regAddr>0xfff)) ||
+ ((BT_REG_LE==regType)&&(regAddr>0xfff)) )
+ {
+ pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ }
+ }
+ break;
+ case BT_GGET_STATUS:
+ DBG_8192C("[MPT], [BT_GGET_STATUS]\n");
+ validParaLen = 0;
+ break;
+ case BT_GGET_REPORT:
+ DBG_8192C("[MPT], [BT_GGET_REPORT]\n");
+ validParaLen = 1;
+ if(getParaLen == validParaLen)
+ {
+ reportType = pBtReq->pParamStart[1];
+ DBG_8192C("[MPT], BT_GGET_REPORT reportType=0x%x!!\n", reportType);
+ if(reportType >= BT_REPORT_MAX)
+ {
+ pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ }
+ break;
+ default:
+ {
+ DBG_8192C("[MPT], Error!! getType=%d, out of range\n", getType);
+ pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ break;
+ }
+ if(getParaLen != validParaLen)
+ {
+ DBG_8192C("[MPT], Error!! wrong parameter length=%d for BT_GET_GEN_CMD cmd id=0x%x, paraLen should=0x%x\n",
+ getParaLen, getType, validParaLen);
+ pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
+ return paraLen;
+ }
+
+ //
+ // execute lower layer opcodes
+ //
+ if(BT_GGET_REG == getType)
+ {
+ // fill h2c parameters
+ // here we should write reg value first then write the address, adviced by Austin
+ btOpcode = BT_LO_OP_READ_REG;
+ h2cParaBuf[0] = regType;
+ h2cParaBuf[1] = pBtReq->pParamStart[2];
+ h2cParaBuf[2] = pBtReq->pParamStart[3];
+ h2cParaLen = 3;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ pu2Tmp = (pu2Byte)&pExtC2h->buf[0];
+ regValue = *pu2Tmp;
+ DBG_8192C("[MPT], read reg regType=0x%x, regAddr=0x%x, regValue=0x%x\n",
+ regType, regAddr, regValue);
+
+ pu4Tmp = (pu4Byte)&pBtRsp->pParamStart[0];
+ *pu4Tmp = regValue;
+ paraLen = 4;
+ }
+ else if(BT_GGET_STATUS == getType)
+ {
+ btOpcode = BT_LO_OP_GET_BT_STATUS;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ pBtRsp->pParamStart[0] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[1] = pExtC2h->buf[1];
+ DBG_8192C("[MPT], read bt status, testMode=0x%x, testStatus=0x%x\n",
+ pBtRsp->pParamStart[0], pBtRsp->pParamStart[1]);
+ paraLen = 2;
+ }
+ else if(BT_GGET_REPORT == getType)
+ {
+ switch(reportType)
+ {
+ case BT_REPORT_RX_PACKET_CNT:
+ {
+ DBG_8192C("[MPT], [Rx Packet Counts]\n");
+ btOpcode = BT_LO_OP_GET_RX_PKT_CNT_L;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ pBtRsp->pParamStart[0] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[1] = pExtC2h->buf[1];
+
+ btOpcode = BT_LO_OP_GET_RX_PKT_CNT_H;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ pBtRsp->pParamStart[2] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[3] = pExtC2h->buf[1];
+ paraLen = 4;
+ }
+ break;
+ case BT_REPORT_RX_ERROR_BITS:
+ {
+ DBG_8192C("[MPT], [Rx Error Bits]\n");
+ btOpcode = BT_LO_OP_GET_RX_ERROR_BITS_L;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ pBtRsp->pParamStart[0] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[1] = pExtC2h->buf[1];
+
+ btOpcode = BT_LO_OP_GET_RX_ERROR_BITS_H;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ pBtRsp->pParamStart[2] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[3] = pExtC2h->buf[1];
+ paraLen = 4;
+ }
+ break;
+ case BT_REPORT_RSSI:
+ {
+ DBG_8192C("[MPT], [RSSI]\n");
+ btOpcode = BT_LO_OP_GET_RSSI;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ pBtRsp->pParamStart[0] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[1] = pExtC2h->buf[1];
+ paraLen = 2;
+ }
+ break;
+ case BT_REPORT_CFO_HDR_QUALITY:
+ {
+ DBG_8192C("[MPT], [CFO & Header Quality]\n");
+ btOpcode = BT_LO_OP_GET_CFO_HDR_QUALITY_L;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ pBtRsp->pParamStart[0] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[1] = pExtC2h->buf[1];
+
+ btOpcode = BT_LO_OP_GET_CFO_HDR_QUALITY_H;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ pBtRsp->pParamStart[2] = pExtC2h->buf[0];
+ pBtRsp->pParamStart[3] = pExtC2h->buf[1];
+ paraLen = 4;
+ }
+ break;
+ case BT_REPORT_CONNECT_TARGET_BD_ADDR:
+ {
+ DBG_8192C("[MPT], [Connected Target BD ADDR]\n");
+ btOpcode = BT_LO_OP_GET_TARGET_BD_ADDR_L;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ bdAddr[5] = pExtC2h->buf[0];
+ bdAddr[4] = pExtC2h->buf[1];
+ bdAddr[3] = pExtC2h->buf[2];
+
+ btOpcode = BT_LO_OP_GET_TARGET_BD_ADDR_H;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ bdAddr[2] = pExtC2h->buf[0];
+ bdAddr[1] = pExtC2h->buf[1];
+ bdAddr[0] = pExtC2h->buf[2];
+
+ DBG_8192C("[MPT], Connected Target BDAddr:%s", bdAddr);
+ for(i=0; i<6; i++)
+ {
+ pBtRsp->pParamStart[i] = bdAddr[5-i];
+ }
+ paraLen = 6;
+ }
+ break;
+ default:
+ pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ break;
+ }
+ }
+
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ return paraLen;
+}
+
+
+
+u2Byte
+mptbt_BtSetGeneral(
+ IN PADAPTER Adapter,
+ IN PBT_REQ_CMD pBtReq,
+ IN PBT_RSP_CMD pBtRsp
+ )
+{
+ u1Byte h2cParaBuf[6] ={0};
+ u1Byte h2cParaLen=0;
+ u2Byte paraLen=0;
+ u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS;
+ u1Byte btOpcode;
+ u1Byte btOpcodeVer=0;
+ u1Byte setType=0;
+ u2Byte setParaLen=0, validParaLen=0;
+ u1Byte regType=0, bdAddr[6]={0}, calVal=0;
+ u4Byte regAddr=0, regValue=0;
+ pu4Byte pu4Tmp;
+ pu2Byte pu2Tmp;
+ pu1Byte pu1Tmp;
+
+ //
+ // check upper layer parameters
+ //
+
+ // check upper layer opcode version
+ if(pBtReq->opCodeVer != 1)
+ {
+ DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n");
+ pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
+ return paraLen;
+ }
+ // check upper layer parameter length
+ if(pBtReq->paraLength < 1)
+ {
+ DBG_8192C("[MPT], Error!! wrong parameter length=%d (should larger than 1)\n", pBtReq->paraLength);
+ pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
+ return paraLen;
+ }
+ setParaLen = pBtReq->paraLength - 1;
+ setType = pBtReq->pParamStart[0];
+
+ DBG_8192C("[MPT], setType=%d, setParaLen=%d\n", setType, setParaLen);
+
+ // check parameter first
+ switch(setType)
+ {
+ case BT_GSET_REG:
+ DBG_8192C ("[MPT], [BT_GSET_REG]\n");
+ validParaLen = 9;
+ if(setParaLen == validParaLen)
+ {
+ btOpcode = BT_LO_OP_WRITE_REG_VALUE;
+ regType = pBtReq->pParamStart[1];
+ pu4Tmp = (pu4Byte)&pBtReq->pParamStart[2];
+ regAddr = *pu4Tmp;
+ pu4Tmp = (pu4Byte)&pBtReq->pParamStart[6];
+ regValue = *pu4Tmp;
+ DBG_8192C("[MPT], BT_GSET_REG regType=0x%x, regAddr=0x%x, regValue=0x%x!!\n",
+ regType, regAddr, regValue);
+ if(regType >= BT_REG_MAX)
+ {
+ pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ if( ((BT_REG_RF==regType)&&(regAddr>0x7f)) ||
+ ((BT_REG_MODEM==regType)&&(regAddr>0x1ff)) ||
+ ((BT_REG_BLUEWIZE==regType)&&(regAddr>0xfff)) ||
+ ((BT_REG_VENDOR==regType)&&(regAddr>0xfff)) ||
+ ((BT_REG_LE==regType)&&(regAddr>0xfff)) )
+ {
+ pBtRsp->status = (btOpcode<<8)| BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ }
+ }
+ break;
+ case BT_GSET_RESET:
+ DBG_8192C("[MPT], [BT_GSET_RESET]\n");
+ validParaLen = 0;
+ break;
+ case BT_GSET_TARGET_BD_ADDR:
+ DBG_8192C("[MPT], [BT_GSET_TARGET_BD_ADDR]\n");
+ validParaLen = 6;
+ if(setParaLen == validParaLen)
+ {
+ btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_H;
+ if( (pBtReq->pParamStart[1]==0) &&
+ (pBtReq->pParamStart[2]==0) &&
+ (pBtReq->pParamStart[3]==0) &&
+ (pBtReq->pParamStart[4]==0) &&
+ (pBtReq->pParamStart[5]==0) &&
+ (pBtReq->pParamStart[6]==0) )
+ {
+ DBG_8192C("[MPT], Error!! targetBDAddr=all zero\n");
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ if( (pBtReq->pParamStart[1]==0xff) &&
+ (pBtReq->pParamStart[2]==0xff) &&
+ (pBtReq->pParamStart[3]==0xff) &&
+ (pBtReq->pParamStart[4]==0xff) &&
+ (pBtReq->pParamStart[5]==0xff) &&
+ (pBtReq->pParamStart[6]==0xff) )
+ {
+ DBG_8192C("[MPT], Error!! targetBDAddr=all 0xf\n");
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ bdAddr[0] = pBtReq->pParamStart[6];
+ bdAddr[1] = pBtReq->pParamStart[5];
+ bdAddr[2] = pBtReq->pParamStart[4];
+ bdAddr[3] = pBtReq->pParamStart[3];
+ bdAddr[4] = pBtReq->pParamStart[2];
+ bdAddr[5] = pBtReq->pParamStart[1];
+ DBG_8192C ("[MPT], target BDAddr:%x,%x,%x,%x,%x,%x\n",
+ bdAddr[0],bdAddr[1],bdAddr[2],bdAddr[3],bdAddr[4],bdAddr[5]);
+ }
+ break;
+ case BT_GSET_TX_PWR_FINETUNE:
+ DBG_8192C("[MPT], [BT_GSET_TX_PWR_FINETUNE]\n");
+ validParaLen = 1;
+ if(setParaLen == validParaLen)
+ {
+ btOpcode = BT_LO_OP_SET_TX_POWER_CALIBRATION;
+ calVal = pBtReq->pParamStart[1];
+ if( (calVal<1) || (calVal>9) )
+ {
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ DBG_8192C ("[MPT], calVal=%d\n", calVal);
+ }
+ break;
+ case BT_SET_TRACKING_INTERVAL:
+ DBG_871X("[MPT], [BT_SET_TRACKING_INTERVAL] setParaLen =%d \n",setParaLen);
+
+ validParaLen = 1;
+ if(setParaLen == validParaLen)
+ calVal = pBtReq->pParamStart[1];
+ break;
+ case BT_SET_THERMAL_METER:
+ DBG_871X("[MPT], [BT_SET_THERMAL_METER] setParaLen =%d \n",setParaLen);
+ validParaLen = 1;
+ if(setParaLen == validParaLen)
+ calVal = pBtReq->pParamStart[1];
+ break;
+ case BT_ENABLE_CFO_TRACKING:
+ DBG_871X("[MPT], [BT_ENABLE_CFO_TRACKING] setParaLen =%d \n",setParaLen);
+ validParaLen = 1;
+ if(setParaLen == validParaLen)
+ calVal = pBtReq->pParamStart[1];
+ break;
+ case BT_GSET_UPDATE_BT_PATCH:
+ if(IS_HARDWARE_TYPE_8723AE(Adapter) && Adapter->bFWReady)
+ {
+ u1Byte i;
+ DBG_8192C ("[MPT], write regs for load patch\n");
+ //BTFwPatch8723A(Adapter);
+ PlatformEFIOWrite1Byte(Adapter, 0xCC, 0x2d);
+ rtw_msleep_os(50);
+ PlatformEFIOWrite4Byte(Adapter, 0x68, 0xa005000c);
+ rtw_msleep_os(50);
+ PlatformEFIOWrite4Byte(Adapter, 0x68, 0xb005000c);
+ rtw_msleep_os(50);
+ PlatformEFIOWrite1Byte(Adapter, 0xCC, 0x29);
+ for(i=0; i<12; i++)
+ rtw_msleep_os(100);
+//#if (DEV_BUS_TYPE == RT_PCI_INTERFACE)
+// BTFwPatch8723A(Adapter);
+//#endif
+ DBG_8192C("[MPT], load BT FW Patch finished!!!\n");
+ }
+ break;
+ default:
+ {
+ DBG_8192C ("[MPT], Error!! setType=%d, out of range\n", setType);
+ pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ break;
+ }
+ if(setParaLen != validParaLen)
+ {
+ DBG_8192C("[MPT], Error!! wrong parameter length=%d for BT_SET_GEN_CMD cmd id=0x%x, paraLen should=0x%x\n",
+ setParaLen, setType, validParaLen);
+ pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
+ return paraLen;
+ }
+
+ //
+ // execute lower layer opcodes
+ //
+ if(BT_GSET_REG == setType)
+ {
+ // fill h2c parameters
+ // here we should write reg value first then write the address, adviced by Austin
+ btOpcode = BT_LO_OP_WRITE_REG_VALUE;
+ h2cParaBuf[0] = pBtReq->pParamStart[6];
+ h2cParaBuf[1] = pBtReq->pParamStart[7];
+ h2cParaBuf[2] = pBtReq->pParamStart[8];
+ h2cParaLen = 3;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ // write reg address
+ btOpcode = BT_LO_OP_WRITE_REG_ADDR;
+ h2cParaBuf[0] = regType;
+ h2cParaBuf[1] = pBtReq->pParamStart[2];
+ h2cParaBuf[2] = pBtReq->pParamStart[3];
+ h2cParaLen = 3;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ }
+ else if(BT_GSET_RESET == setType)
+ {
+ btOpcode = BT_LO_OP_RESET;
+ h2cParaLen = 0;
+ // execute h2c and check respond c2h from bt fw is correct or not
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ }
+ else if(BT_GSET_TARGET_BD_ADDR == setType)
+ {
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_L;
+ h2cParaBuf[0] = pBtReq->pParamStart[1];
+ h2cParaBuf[1] = pBtReq->pParamStart[2];
+ h2cParaBuf[2] = pBtReq->pParamStart[3];
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ btOpcode = BT_LO_OP_SET_TARGET_BD_ADDR_H;
+ h2cParaBuf[0] = pBtReq->pParamStart[4];
+ h2cParaBuf[1] = pBtReq->pParamStart[5];
+ h2cParaBuf[2] = pBtReq->pParamStart[6];
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ }
+ else if(BT_GSET_TX_PWR_FINETUNE == setType)
+ {
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_TX_POWER_CALIBRATION;
+ h2cParaBuf[0] = calVal;
+ h2cParaLen = 1;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ }
+ else if(BT_SET_TRACKING_INTERVAL == setType)
+ {
+ // BT_LO_OP_SET_TRACKING_INTERVAL = 0x22,
+ // BT_LO_OP_SET_THERMAL_METER = 0x23,
+ // BT_LO_OP_ENABLE_CFO_TRACKING = 0x24,
+ btOpcode = BT_LO_OP_SET_TRACKING_INTERVAL;
+ h2cParaBuf[0] = calVal;
+ h2cParaLen = 1;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ }
+ else if(BT_SET_THERMAL_METER == setType)
+ {
+ btOpcode = BT_LO_OP_SET_THERMAL_METER;
+ h2cParaBuf[0] = calVal;
+ h2cParaLen = 1;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ }
+ else if(BT_ENABLE_CFO_TRACKING == setType)
+ {
+ btOpcode = BT_LO_OP_ENABLE_CFO_TRACKING;
+ h2cParaBuf[0] = calVal;
+ h2cParaLen = 1;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+ }
+
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ return paraLen;
+}
+
+
+
+u2Byte
+mptbt_BtSetTxRxPars(
+ IN PADAPTER Adapter,
+ IN PBT_REQ_CMD pBtReq,
+ IN PBT_RSP_CMD pBtRsp
+ )
+{
+ u1Byte h2cParaBuf[6] ={0};
+ u1Byte h2cParaLen=0;
+ u2Byte paraLen=0;
+ u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS;
+ u1Byte btOpcode;
+ u1Byte btOpcodeVer=0;
+ PBT_TXRX_PARAMETERS pTxRxPars=(PBT_TXRX_PARAMETERS)&pBtReq->pParamStart[0];
+ u2Byte lenTxRx=sizeof(BT_TXRX_PARAMETERS);
+ u1Byte i;
+ u1Byte bdAddr[6]={0};
+
+ //
+ // check upper layer parameters
+ //
+
+ // 1. check upper layer opcode version
+ if(pBtReq->opCodeVer != 1)
+ {
+ DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n");
+ pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
+ return paraLen;
+ }
+ // 2. check upper layer parameter length
+ if(pBtReq->paraLength == sizeof(BT_TXRX_PARAMETERS))
+ {
+ DBG_8192C ("[MPT], pTxRxPars->txrxChannel=0x%x \n", pTxRxPars->txrxChannel);
+ DBG_8192C ("[MPT], pTxRxPars->txrxTxPktCnt=0x%8x \n", pTxRxPars->txrxTxPktCnt);
+ DBG_8192C ("[MPT], pTxRxPars->txrxTxPktInterval=0x%x \n", pTxRxPars->txrxTxPktInterval);
+ DBG_8192C ("[MPT], pTxRxPars->txrxPayloadType=0x%x \n", pTxRxPars->txrxPayloadType);
+ DBG_8192C ("[MPT], pTxRxPars->txrxPktType=0x%x \n", pTxRxPars->txrxPktType);
+ DBG_8192C ("[MPT], pTxRxPars->txrxPayloadLen=0x%x \n", pTxRxPars->txrxPayloadLen);
+ DBG_8192C ("[MPT], pTxRxPars->txrxPktHeader=0x%x \n", pTxRxPars->txrxPktHeader);
+ DBG_8192C ("[MPT], pTxRxPars->txrxWhitenCoeff=0x%x \n", pTxRxPars->txrxWhitenCoeff);
+ bdAddr[0] = pTxRxPars->txrxBdaddr[5];
+ bdAddr[1] = pTxRxPars->txrxBdaddr[4];
+ bdAddr[2] = pTxRxPars->txrxBdaddr[3];
+ bdAddr[3] = pTxRxPars->txrxBdaddr[2];
+ bdAddr[4] = pTxRxPars->txrxBdaddr[1];
+ bdAddr[5] = pTxRxPars->txrxBdaddr[0];
+ DBG_8192C ("[MPT], pTxRxPars->txrxBdaddr: %s", &bdAddr[0]);
+ DBG_8192C ("[MPT], pTxRxPars->txrxTxGainIndex=0x%x \n", pTxRxPars->txrxTxGainIndex);
+ }
+ else
+ {
+ DBG_8192C ("[MPT], Error!! pBtReq->paraLength=%d, correct Len=%d\n", pBtReq->paraLength, lenTxRx);
+ pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
+ return paraLen;
+ }
+
+ //
+ // execute lower layer opcodes
+ //
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_PKT_HEADER;
+ if(pTxRxPars->txrxPktHeader > 0x3ffff)
+ {
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxPktHeader=0x%x is out of range, (should be between 0x0~0x3ffff)\n", pTxRxPars->txrxPktHeader);
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ h2cParaBuf[0] = (u1Byte)(pTxRxPars->txrxPktHeader&0xff);
+ h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxPktHeader&0xff00)>>8);
+ h2cParaBuf[2] = (u1Byte)((pTxRxPars->txrxPktHeader&0xff0000)>>16);
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_PKT_TYPE_LEN;
+ {
+ u2Byte payloadLenLimit=0;
+ switch(pTxRxPars->txrxPktType)
+ {
+ case MP_BT_PKT_DH1:
+ payloadLenLimit = 27*8;
+ break;
+ case MP_BT_PKT_DH3:
+ payloadLenLimit = 183*8;
+ break;
+ case MP_BT_PKT_DH5:
+ payloadLenLimit = 339*8;
+ break;
+ case MP_BT_PKT_2DH1:
+ payloadLenLimit = 54*8;
+ break;
+ case MP_BT_PKT_2DH3:
+ payloadLenLimit = 367*8;
+ break;
+ case MP_BT_PKT_2DH5:
+ payloadLenLimit = 679*8;
+ break;
+ case MP_BT_PKT_3DH1:
+ payloadLenLimit = 83*8;
+ break;
+ case MP_BT_PKT_3DH3:
+ payloadLenLimit = 552*8;
+ break;
+ case MP_BT_PKT_3DH5:
+ payloadLenLimit = 1021*8;
+ break;
+ case MP_BT_PKT_LE:
+ payloadLenLimit = 39*8;
+ break;
+ default:
+ {
+ DBG_8192C ("[MPT], Error!! Unknown pTxRxPars->txrxPktType=0x%x\n", pTxRxPars->txrxPktType);
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ break;
+ }
+
+ if(pTxRxPars->txrxPayloadLen > payloadLenLimit)
+ {
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxPayloadLen=0x%x, (should smaller than %d)\n",
+ pTxRxPars->txrxPayloadLen, payloadLenLimit);
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+
+ h2cParaBuf[0] = pTxRxPars->txrxPktType;
+ h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxPayloadLen&0xff));
+ h2cParaBuf[2] = (u1Byte)((pTxRxPars->txrxPayloadLen&0xff00)>>8);
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_PKT_CNT_L_PL_TYPE;
+ if(pTxRxPars->txrxPayloadType > MP_BT_PAYLOAD_MAX)
+ {
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxPayloadType=0x%x, (should be between 0~4)\n", pTxRxPars->txrxPayloadType);
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ h2cParaBuf[0] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff));
+ h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff00)>>8);
+ h2cParaBuf[2] = pTxRxPars->txrxPayloadType;
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_PKT_CNT_H_PKT_INTV;
+ if(pTxRxPars->txrxTxPktInterval > 15)
+ {
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxTxPktInterval=0x%x, (should be between 0~15)\n", pTxRxPars->txrxTxPktInterval);
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ h2cParaBuf[0] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff0000)>>16);
+ h2cParaBuf[1] = (u1Byte)((pTxRxPars->txrxTxPktCnt&0xff000000)>>24);
+ h2cParaBuf[2] = pTxRxPars->txrxTxPktInterval;
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_WHITENCOEFF;
+ {
+ h2cParaBuf[0] = pTxRxPars->txrxWhitenCoeff;
+ h2cParaLen = 1;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_CHNL_TX_GAIN;
+ if( (pTxRxPars->txrxChannel > 78) ||
+ (pTxRxPars->txrxTxGainIndex > 7) )
+ {
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxChannel=0x%x, (should be between 0~78)\n", pTxRxPars->txrxChannel);
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxTxGainIndex=0x%x, (should be between 0~7)\n", pTxRxPars->txrxTxGainIndex);
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ h2cParaBuf[0] = pTxRxPars->txrxChannel;
+ h2cParaBuf[1] = pTxRxPars->txrxTxGainIndex;
+ h2cParaLen = 2;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ // fill h2c parameters
+ btOpcode = BT_LO_OP_SET_BD_ADDR_L;
+ if( (pTxRxPars->txrxBdaddr[0]==0) &&
+ (pTxRxPars->txrxBdaddr[1]==0) &&
+ (pTxRxPars->txrxBdaddr[2]==0) &&
+ (pTxRxPars->txrxBdaddr[3]==0) &&
+ (pTxRxPars->txrxBdaddr[4]==0) &&
+ (pTxRxPars->txrxBdaddr[5]==0) )
+ {
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxBdaddr=all zero\n");
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ if( (pTxRxPars->txrxBdaddr[0]==0xff) &&
+ (pTxRxPars->txrxBdaddr[1]==0xff) &&
+ (pTxRxPars->txrxBdaddr[2]==0xff) &&
+ (pTxRxPars->txrxBdaddr[3]==0xff) &&
+ (pTxRxPars->txrxBdaddr[4]==0xff) &&
+ (pTxRxPars->txrxBdaddr[5]==0xff) )
+ {
+ DBG_8192C ("[MPT], Error!! pTxRxPars->txrxBdaddr=all 0xf\n");
+ pBtRsp->status = (btOpcode<<8)|BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+
+ {
+ h2cParaBuf[0] = pTxRxPars->txrxBdaddr[0];
+ h2cParaBuf[1] = pTxRxPars->txrxBdaddr[1];
+ h2cParaBuf[2] = pTxRxPars->txrxBdaddr[2];
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ btOpcode = BT_LO_OP_SET_BD_ADDR_H;
+ {
+ h2cParaBuf[0] = pTxRxPars->txrxBdaddr[3];
+ h2cParaBuf[1] = pTxRxPars->txrxBdaddr[4];
+ h2cParaBuf[2] = pTxRxPars->txrxBdaddr[5];
+ h2cParaLen = 3;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+ // ckeck bt return status.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C ("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ return paraLen;
+}
+
+
+
+u2Byte
+mptbt_BtTestCtrl(
+ IN PADAPTER Adapter,
+ IN PBT_REQ_CMD pBtReq,
+ IN PBT_RSP_CMD pBtRsp
+ )
+{
+ u1Byte h2cParaBuf[6] ={0};
+ u1Byte h2cParaLen=0;
+ u2Byte paraLen=0;
+ u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS;
+ u1Byte btOpcode;
+ u1Byte btOpcodeVer=0;
+ u1Byte testCtrl=0;
+
+ //
+ // check upper layer parameters
+ //
+
+ // 1. check upper layer opcode version
+ if(pBtReq->opCodeVer != 1)
+ {
+ DBG_8192C("[MPT], Error!! Upper OP code version not match!!!\n");
+ pBtRsp->status = BT_STATUS_OPCODE_U_VERSION_MISMATCH;
+ return paraLen;
+ }
+ // 2. check upper layer parameter length
+ if(1 == pBtReq->paraLength)
+ {
+ testCtrl = pBtReq->pParamStart[0];
+ DBG_8192C("[MPT], testCtrl=%d \n", testCtrl);
+ }
+ else
+ {
+ DBG_8192C("[MPT], Error!! wrong parameter length=%d (should be 1)\n", pBtReq->paraLength);
+ pBtRsp->status = BT_STATUS_PARAMETER_FORMAT_ERROR_U;
+ return paraLen;
+ }
+
+ //
+ // execute lower layer opcodes
+ //
+
+ // 1. fill h2c parameters
+ // check bt mode
+ btOpcode = BT_LO_OP_TEST_CTRL;
+ if(testCtrl >= MP_BT_TEST_MAX)
+ {
+ DBG_8192C("[MPT], Error!! testCtrl=0x%x, (should be between smaller or equal to 0x%x)\n",
+ testCtrl, MP_BT_TEST_MAX-1);
+ pBtRsp->status = BT_STATUS_PARAMETER_OUT_OF_RANGE_U;
+ return paraLen;
+ }
+ else
+ {
+ h2cParaBuf[0] = testCtrl;
+ h2cParaLen = 1;
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ }
+
+ // 3. construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ return paraLen;
+}
+
+
+u2Byte
+mptbt_TestBT(
+ IN PADAPTER Adapter,
+ IN PBT_REQ_CMD pBtReq,
+ IN PBT_RSP_CMD pBtRsp
+ )
+{
+
+ u1Byte h2cParaBuf[6] ={0};
+ u1Byte h2cParaLen=0;
+ u2Byte paraLen=0;
+ u1Byte retStatus=BT_STATUS_BT_OP_SUCCESS;
+ u1Byte btOpcode;
+ u1Byte btOpcodeVer=0;
+ u1Byte testCtrl=0;
+
+ // 1. fill h2c parameters
+ btOpcode = 0x11;
+ h2cParaBuf[0] = 0x11;
+ h2cParaBuf[1] = 0x0;
+ h2cParaBuf[2] = 0x0;
+ h2cParaBuf[3] = 0x0;
+ h2cParaBuf[4] = 0x0;
+ h2cParaLen = 1;
+ // retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, &h2cParaBuf[0], h2cParaLen);
+ retStatus = mptbt_BtFwOpCodeProcess(Adapter, btOpcode, btOpcodeVer, h2cParaBuf, h2cParaLen);
+
+
+ // 3. construct respond status code and data.
+ if(BT_STATUS_BT_OP_SUCCESS != retStatus)
+ {
+ pBtRsp->status = ((btOpcode<<8)|retStatus);
+ DBG_8192C("[MPT], Error!! status code=0x%x \n", pBtRsp->status);
+ return paraLen;
+ }
+
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ return paraLen;
+}
+
+VOID
+mptbt_BtControlProcess(
+ PADAPTER Adapter,
+ PVOID pInBuf
+ )
+{
+ u1Byte H2C_Parameter[6] ={0};
+ PBT_H2C pH2c=(PBT_H2C)&H2C_Parameter[0];
+ PMPT_CONTEXT pMptCtx=&(Adapter->mppriv.MptCtx);
+ PBT_REQ_CMD pBtReq=(PBT_REQ_CMD)pInBuf;
+ PBT_RSP_CMD pBtRsp=(PBT_RSP_CMD)&pMptCtx->mptOutBuf[0];
+ u1Byte i;
+
+ DBG_8192C("[MPT], mptbt_BtControlProcess()=========>\n");
+
+ DBG_8192C("[MPT], input opCodeVer=%d\n", pBtReq->opCodeVer);
+ DBG_8192C("[MPT], input OpCode=%d\n", pBtReq->OpCode);
+ DBG_8192C("[MPT], paraLength=%d \n", pBtReq->paraLength);
+ if(pBtReq->paraLength)
+ {
+ //DBG_8192C("[MPT], parameters(hex):0x%x %d \n",&pBtReq->pParamStart[0], pBtReq->paraLength);
+ }
+
+ // The following we should maintain the User OP codes sent by upper layer
+
+ pBtRsp->status = BT_STATUS_SUCCESS;
+ pMptCtx->mptOutLen = 4; //length of (BT_RSP_CMD.status+BT_RSP_CMD.paraLength)
+ pBtRsp->paraLength = 0x0;
+
+ _rtw_memset((PVOID)&pMptCtx->mptOutBuf[0], '\0',100);
+
+ switch(pBtReq->OpCode)
+ {
+ case BT_UP_OP_BT_READY:
+ DBG_8192C("[MPT], OPcode : [BT_READY]\n");
+ pBtRsp->paraLength = mptbt_BtReady(Adapter, pBtReq, pBtRsp);
+ break;
+ case BT_UP_OP_BT_SET_MODE:
+ DBG_8192C("[MPT], OPcode : [BT_SET_MODE]\n");
+ pBtRsp->paraLength = mptbt_BtSetMode(Adapter, pBtReq, pBtRsp);
+ break;
+ case BT_UP_OP_BT_SET_TX_RX_PARAMETER:
+ DBG_8192C("[MPT], OPcode : [BT_SET_TXRX_PARAMETER]\n");
+ pBtRsp->paraLength = mptbt_BtSetTxRxPars(Adapter, pBtReq, pBtRsp);
+ break;
+ case BT_UP_OP_BT_SET_GENERAL:
+ DBG_8192C("[MPT], OPcode : [BT_SET_GENERAL]\n");
+ pBtRsp->paraLength = mptbt_BtSetGeneral(Adapter, pBtReq, pBtRsp);
+ break;
+ case BT_UP_OP_BT_GET_GENERAL:
+ DBG_8192C("[MPT], OPcode : [BT_GET_GENERAL]\n");
+ pBtRsp->paraLength = mptbt_BtGetGeneral(Adapter, pBtReq, pBtRsp);
+ break;
+ case BT_UP_OP_BT_TEST_CTRL:
+ DBG_8192C("[MPT], OPcode : [BT_TEST_CTRL]\n");
+ pBtRsp->paraLength = mptbt_BtTestCtrl(Adapter, pBtReq, pBtRsp);
+ break;
+ case BT_UP_OP_TEST_BT:
+ DBG_8192C("[MPT], OPcode : [TEST_BT]\n");
+ pBtRsp->paraLength = mptbt_TestBT(Adapter, pBtReq, pBtRsp);
+ break;
+ default:
+ DBG_8192C("[MPT], Error!! OPcode : UNDEFINED!!!!\n");
+ pBtRsp->status = BT_STATUS_UNKNOWN_OPCODE_U;
+ pBtRsp->paraLength = 0x0;
+ break;
+ }
+
+ DBG_8192C("pBtRsp->paraLength =%d \n",pBtRsp->paraLength);
+
+ pMptCtx->mptOutLen += pBtRsp->paraLength;
+
+ DBG_8192C("\n [MPT], OUT to DLL pMptCtx->mptOutLen=%d ,pBtRsp->paraLength =%d ",pMptCtx->mptOutLen,pBtRsp->paraLength);
+
+ DBG_8192C("\n [MPT], mptbt_BtControlProcess()<=========\n");
+}
+
+#endif
+
|