diff options
Diffstat (limited to 'drivers/net/wireless/rtl8723as/hal/rtl8723a/rtl8723a_dm.c')
| -rwxr-xr-x | drivers/net/wireless/rtl8723as/hal/rtl8723a/rtl8723a_dm.c | 1159 |
1 files changed, 581 insertions, 578 deletions
diff --git a/drivers/net/wireless/rtl8723as/hal/rtl8723a/rtl8723a_dm.c b/drivers/net/wireless/rtl8723as/hal/rtl8723a/rtl8723a_dm.c index 6d82a0f7ab9a..bab4925b0959 100755 --- a/drivers/net/wireless/rtl8723as/hal/rtl8723a/rtl8723a_dm.c +++ b/drivers/net/wireless/rtl8723as/hal/rtl8723a/rtl8723a_dm.c @@ -1,578 +1,581 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * - ******************************************************************************/ -//============================================================ -// Description: -// -// This file is for 92CE/92CU dynamic mechanism only -// -// -//============================================================ -#define _RTL8723A_DM_C_ - -//============================================================ -// include files -//============================================================ -#include <drv_conf.h> -#include <osdep_service.h> -#include <drv_types.h> -#include <rtw_byteorder.h> - -#include <rtl8723a_hal.h> - -//============================================================ -// Global var -//============================================================ - - -static VOID -dm_CheckProtection( - IN PADAPTER Adapter - ) -{ -#if 0 - PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); - u1Byte CurRate, RateThreshold; - - if(pMgntInfo->pHTInfo->bCurBW40MHz) - RateThreshold = MGN_MCS1; - else - RateThreshold = MGN_MCS3; - - if(Adapter->TxStats.CurrentInitTxRate <= RateThreshold) - { - pMgntInfo->bDmDisableProtect = TRUE; - DbgPrint("Forced disable protect: %x\n", Adapter->TxStats.CurrentInitTxRate); - } - else - { - pMgntInfo->bDmDisableProtect = FALSE; - DbgPrint("Enable protect: %x\n", Adapter->TxStats.CurrentInitTxRate); - } -#endif -} - -static VOID -dm_CheckStatistics( - IN PADAPTER Adapter - ) -{ -#if 0 - if(!Adapter->MgntInfo.bMediaConnect) - return; - - //2008.12.10 tynli Add for getting Current_Tx_Rate_Reg flexibly. - rtw_hal_get_hwreg( Adapter, HW_VAR_INIT_TX_RATE, (pu1Byte)(&Adapter->TxStats.CurrentInitTxRate) ); - - // Calculate current Tx Rate(Successful transmited!!) - - // Calculate current Rx Rate(Successful received!!) - - //for tx tx retry count - rtw_hal_get_hwreg( Adapter, HW_VAR_RETRY_COUNT, (pu1Byte)(&Adapter->TxStats.NumTxRetryCount) ); -#endif -} - -static void dm_CheckPbcGPIO(_adapter *padapter) -{ - u8 tmp1byte; - u8 bPbcPressed = _FALSE; - - if(!padapter->registrypriv.hw_wps_pbc) - return; - -#ifdef CONFIG_USB_HCI - tmp1byte = rtw_read8(padapter, GPIO_IO_SEL); - tmp1byte |= (HAL_8192C_HW_GPIO_WPS_BIT); - rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as output mode - - tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT); - rtw_write8(padapter, GPIO_IN, tmp1byte); //reset the floating voltage level - - tmp1byte = rtw_read8(padapter, GPIO_IO_SEL); - tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT); - rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as input mode - - tmp1byte =rtw_read8(padapter, GPIO_IN); - - if (tmp1byte == 0xff) - return ; - - if (tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT) - { - bPbcPressed = _TRUE; - } -#else - tmp1byte = rtw_read8(padapter, GPIO_IN); - //RT_TRACE(COMP_IO, DBG_TRACE, ("dm_CheckPbcGPIO - %x\n", tmp1byte)); - - if (tmp1byte == 0xff || padapter->init_adpt_in_progress) - return ; - - if((tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)==0) - { - bPbcPressed = _TRUE; - } -#endif - - if( _TRUE == bPbcPressed) - { - // Here we only set bPbcPressed to true - // After trigger PBC, the variable will be set to false - DBG_8192C("CheckPbcGPIO - PBC is pressed\n"); - -#ifdef RTK_DMP_PLATFORM -#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)) - kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_NET_PBC); -#else - kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_NET_PBC); -#endif -#else - - if ( padapter->pid[0] == 0 ) - { // 0 is the default value and it means the application monitors the HW PBC doesn't privde its pid to driver. - return; - } - -#ifdef PLATFORM_LINUX - rtw_signal_process(padapter->pid[0], SIGUSR1); -#endif -#endif - } -} - -#ifdef CONFIG_PCI_HCI -// -// Description: -// Perform interrupt migration dynamically to reduce CPU utilization. -// -// Assumption: -// 1. Do not enable migration under WIFI test. -// -// Created by Roger, 2010.03.05. -// -VOID -dm_InterruptMigration( - IN PADAPTER Adapter - ) -{ - HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); - struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); - BOOLEAN bCurrentIntMt, bCurrentACIntDisable; - BOOLEAN IntMtToSet = _FALSE; - BOOLEAN ACIntToSet = _FALSE; - - - // Retrieve current interrupt migration and Tx four ACs IMR settings first. - bCurrentIntMt = pHalData->bInterruptMigration; - bCurrentACIntDisable = pHalData->bDisableTxInt; - - // - // <Roger_Notes> Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics - // when interrupt migration is set before. 2010.03.05. - // - if(!Adapter->registrypriv.wifi_spec && - (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && - pmlmepriv->LinkDetectInfo.bHigherBusyTraffic) - { - IntMtToSet = _TRUE; - - // To check whether we should disable Tx interrupt or not. - if(pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic ) - ACIntToSet = _TRUE; - } - - //Update current settings. - if( bCurrentIntMt != IntMtToSet ){ - DBG_8192C("%s(): Update interrrupt migration(%d)\n",__FUNCTION__,IntMtToSet); - if(IntMtToSet) - { - // - // <Roger_Notes> Set interrrupt migration timer and corresponging Tx/Rx counter. - // timer 25ns*0xfa0=100us for 0xf packets. - // 2010.03.05. - // - rtw_write32(Adapter, REG_INT_MIG, 0xff000fa0);// 0x306:Rx, 0x307:Tx - pHalData->bInterruptMigration = IntMtToSet; - } - else - { - // Reset all interrupt migration settings. - rtw_write32(Adapter, REG_INT_MIG, 0); - pHalData->bInterruptMigration = IntMtToSet; - } - } - - /*if( bCurrentACIntDisable != ACIntToSet ){ - DBG_8192C("%s(): Update AC interrrupt(%d)\n",__FUNCTION__,ACIntToSet); - if(ACIntToSet) // Disable four ACs interrupts. - { - // - // <Roger_Notes> Disable VO, VI, BE and BK four AC interrupts to gain more efficient CPU utilization. - // When extremely highly Rx OK occurs, we will disable Tx interrupts. - // 2010.03.05. - // - UpdateInterruptMask8192CE( Adapter, 0, RT_AC_INT_MASKS ); - pHalData->bDisableTxInt = ACIntToSet; - } - else// Enable four ACs interrupts. - { - UpdateInterruptMask8192CE( Adapter, RT_AC_INT_MASKS, 0 ); - pHalData->bDisableTxInt = ACIntToSet; - } - }*/ - -} - -#endif - -// -// Initialize GPIO setting registers -// -static void -dm_InitGPIOSetting( - IN PADAPTER Adapter - ) -{ - PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); - - u8 tmp1byte; - - tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG); - tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT); - - rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte); -} -//============================================================ -// functions -//============================================================ -static void Init_ODM_ComInfo_8723a(PADAPTER Adapter) -{ - - PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); - PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); - u8 cut_ver,fab_ver; - - // - // Init Value - // - _rtw_memset(pDM_Odm,0,sizeof(pDM_Odm)); - - pDM_Odm->Adapter = Adapter; - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PLATFORM,ODM_CE); - if(Adapter->interface_type == RTW_GSPI ) - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,ODM_ITRF_SDIO); - else - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,Adapter->interface_type);//RTL871X_HCI_TYPE - - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_IC_TYPE,ODM_RTL8723A); - - - if(IS_8723A_A_CUT(pHalData->VersionID)) - { - fab_ver = ODM_UMC; - cut_ver = ODM_CUT_A; - } - else if(IS_8723A_B_CUT(pHalData->VersionID)) - { - fab_ver = ODM_UMC; - cut_ver = ODM_CUT_B; - } - else - { - fab_ver = ODM_TSMC; - cut_ver = ODM_CUT_A; - } - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_FAB_VER,fab_ver); - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_CUT_VER,cut_ver); - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_MP_TEST_CHIP,IS_NORMAL_CHIP(pHalData->VersionID)); - -#ifdef CONFIG_USB_HCI - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_BOARD_TYPE,pHalData->BoardType); - - if(pHalData->BoardType == BOARD_USB_High_PA){ - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_EXT_LNA,_TRUE); - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_EXT_PA,_TRUE); - } -#endif - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PATCH_ID,pHalData->CustomerID); - // ODM_CMNINFO_BINHCT_TEST only for MP Team - ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_BWIFI_TEST,Adapter->registrypriv.wifi_spec); - - - if(pHalData->rf_type == RF_1T1R){ - ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T1R); - } - else if(pHalData->rf_type == RF_2T2R){ - ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_2T2R); - } - else if(pHalData->rf_type == RF_1T2R){ - ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T2R); - } -} -static void Update_ODM_ComInfo_8723a(PADAPTER Adapter) -{ - struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; - struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; - struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv; - PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); - PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); - struct dm_priv *pdmpriv = &pHalData->dmpriv; - int i; - pdmpriv->InitODMFlag = ODM_BB_DIG | -#ifdef CONFIG_ODM_REFRESH_RAMASK - ODM_BB_RA_MASK | -#endif - ODM_BB_DYNAMIC_TXPWR | - ODM_BB_FA_CNT | - ODM_BB_RSSI_MONITOR | - ODM_BB_CCK_PD | - ODM_BB_PWR_SAVE | - ODM_MAC_EDCA_TURBO | - ODM_RF_TX_PWR_TRACK | - ODM_RF_CALIBRATION ; - // - // Pointer reference - // - //ODM_CMNINFO_MAC_PHY_MODE pHalData->MacPhyMode92D - // ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_MAC_PHY_MODE,&(pDM_Odm->u1Byte_temp)); - - -#ifdef CONFIG_ANTENNA_DIVERSITY - if(pHalData->AntDivCfg) - pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV; -#endif - -#if (MP_DRIVER==1) - if (Adapter->registrypriv.mp_mode == 1) - { - pdmpriv->InitODMFlag = ODM_RF_CALIBRATION | - ODM_RF_TX_PWR_TRACK; - } -#endif//(MP_DRIVER==1) - - ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_ABILITY,pdmpriv->InitODMFlag); - - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_TX_UNI,&(Adapter->xmitpriv.tx_bytes)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_RX_UNI,&(Adapter->recvpriv.rx_bytes)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_WM_MODE,&(pmlmeext->cur_wireless_mode)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_CHNL_OFFSET,&(pHalData->nCur40MhzPrimeSC)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_MODE,&(Adapter->securitypriv.dot11PrivacyAlgrthm)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BW,&(pHalData->CurrentChannelBW )); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_CHNL,&( pHalData->CurrentChannel)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_NET_CLOSED,&( Adapter->net_closed)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_MP_MODE,&(Adapter->registrypriv.mp_mode)); - - //================= only for 8192D ================= - /* - //pHalData->CurrentBandType92D - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BAND,&(pDM_Odm->u1Byte_temp)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_GET_VALUE,&(pDM_Odm->u1Byte_temp)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BUDDY_ADAPTOR,&(pDM_Odm->PADAPTER_temp)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_IS_MASTER,&(pDM_Odm->u1Byte_temp)); - //================= only for 8192D ================= - // driver havn't those variable now - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_OPERATION,&(pDM_Odm->u1Byte_temp)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_DISABLE_EDCA,&(pDM_Odm->u1Byte_temp)); - */ - - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SCAN,&(pmlmepriv->bScanInProcess)); - ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_POWER_SAVING,&(pwrctrlpriv->bpower_saving)); - - - for(i=0; i< NUM_STA; i++) - { - //pDM_Odm->pODM_StaInfo[i] = NULL; - ODM_CmnInfoPtrArrayHook(pDM_Odm, ODM_CMNINFO_STA_STATUS,i,NULL); - } -} - -void -rtl8723a_InitHalDm( - IN PADAPTER Adapter - ) -{ - PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); - struct dm_priv *pdmpriv = &pHalData->dmpriv; - PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); - - u8 i; - - pdmpriv->DM_Type = DM_Type_ByDriver; - pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE; - -#ifdef CONFIG_BT_COEXIST - pdmpriv->DMFlag |= DYNAMIC_FUNC_BT; -// btdm_InitBtCoexistDM(Adapter); // Move to BT_CoexistMechanism() -#endif - pdmpriv->InitDMFlag = pdmpriv->DMFlag; - - Update_ODM_ComInfo_8723a(Adapter); - ODM_DMInit(pDM_Odm); - // Save REG_INIDATA_RATE_SEL value for TXDESC. - for(i = 0 ; i<32 ; i++) - { - pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL+i) & 0x3f; - } - -} - -VOID -rtl8723a_HalDmWatchDog( - IN PADAPTER Adapter - ) -{ - BOOLEAN bFwCurrentInPSMode = _FALSE; - BOOLEAN bFwPSAwake = _TRUE; - u8 hw_init_completed = _FALSE; - PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); - struct dm_priv *pdmpriv = &pHalData->dmpriv; -#ifdef CONFIG_CONCURRENT_MODE - PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter; -#endif //CONFIG_CONCURRENT_MODE - - hw_init_completed = Adapter->hw_init_completed; - - if (hw_init_completed == _FALSE) - goto skip_dm; - -#ifdef CONFIG_LPS - #ifdef CONFIG_CONCURRENT_MODE - if (Adapter->iface_type != IFACE_PORT0 && pbuddy_adapter) { - bFwCurrentInPSMode = pbuddy_adapter->pwrctrlpriv.bFwCurrentInPSMode; - rtw_hal_get_hwreg(pbuddy_adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake)); - } else - #endif //CONFIG_CONCURRENT_MODE - { - bFwCurrentInPSMode = Adapter->pwrctrlpriv.bFwCurrentInPSMode; - rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake)); - } -#endif - -#ifdef CONFIG_P2P_PS - // Fw is under p2p powersaving mode, driver should stop dynamic mechanism. - // modifed by thomas. 2011.06.11. - if(Adapter->wdinfo.p2p_ps_mode) - bFwPSAwake = _FALSE; -#endif //CONFIG_P2P_PS - - if( (hw_init_completed == _TRUE) - && ((!bFwCurrentInPSMode) && bFwPSAwake)) - { - // - // Calculate Tx/Rx statistics. - // - dm_CheckStatistics(Adapter); - - -#ifdef CONFIG_CONCURRENT_MODE - if(Adapter->adapter_type > PRIMARY_ADAPTER) - goto _record_initrate; -#endif - - // - // Dynamically switch RTS/CTS protection. - // - //dm_CheckProtection(Adapter); - -#ifdef CONFIG_PCI_HCI - // 20100630 Joseph: Disable Interrupt Migration mechanism temporarily because it degrades Rx throughput. - // Tx Migration settings. - //dm_InterruptMigration(Adapter); - - //if(Adapter->HalFunc.TxCheckStuckHandler(Adapter)) - // PlatformScheduleWorkItem(&(GET_HAL_DATA(Adapter)->HalResetWorkItem)); -#endif -_record_initrate: - - // Read REG_INIDATA_RATE_SEL value for TXDESC. - if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE) - { - pdmpriv->INIDATA_RATE[0] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL) & 0x3f; - } - else - { - u8 i; - for(i=1 ; i < (Adapter->stapriv.asoc_sta_count + 1); i++) - { - pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, (REG_INIDATA_RATE_SEL+i)) & 0x3f; - } - } - } - - - //ODM - if (hw_init_completed == _TRUE) - { - u8 bLinked=_FALSE; - - #ifdef CONFIG_DISABLE_ODM - pHalData->odmpriv.SupportAbility = 0; - #endif - - if(rtw_linked_check(Adapter)) - bLinked = _TRUE; - -#ifdef CONFIG_CONCURRENT_MODE - if(pbuddy_adapter && rtw_linked_check(pbuddy_adapter)) - bLinked = _TRUE; -#endif //CONFIG_CONCURRENT_MODE - - ODM_CmnInfoUpdate(&pHalData->odmpriv ,ODM_CMNINFO_LINK, bLinked); - ODM_DMWatchdog(&pHalData->odmpriv); - - } - -skip_dm: - - // Check GPIO to determine current RF on/off and Pbc status. - // Check Hardware Radio ON/OFF or not -#ifdef CONFIG_PCI_HCI - if(pHalData->bGpioHwWpsPbc) -#endif - { - dm_CheckPbcGPIO(Adapter); // Add by hpfan 2008-03-11 - } - -} - -void rtl8723a_init_dm_priv(IN PADAPTER Adapter) -{ - PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); - struct dm_priv *pdmpriv = &pHalData->dmpriv; - PDM_ODM_T podmpriv = &pHalData->odmpriv; - _rtw_memset(pdmpriv, 0, sizeof(struct dm_priv)); - Init_ODM_ComInfo_8723a(Adapter); -#ifdef CONFIG_SW_ANTENNA_DIVERSITY - //_init_timer(&(pdmpriv->SwAntennaSwitchTimer), Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter); - ODM_InitAllTimers(podmpriv ); -#endif -} - -void rtl8723a_deinit_dm_priv(IN PADAPTER Adapter) -{ - PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); - struct dm_priv *pdmpriv = &pHalData->dmpriv; - PDM_ODM_T podmpriv = &pHalData->odmpriv; -#ifdef CONFIG_SW_ANTENNA_DIVERSITY - //_cancel_timer_ex(&pdmpriv->SwAntennaSwitchTimer); - ODM_CancelAllTimers(podmpriv); -#endif -} - +/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+//============================================================
+// Description:
+//
+// This file is for 92CE/92CU dynamic mechanism only
+//
+//
+//============================================================
+#define _RTL8723A_DM_C_
+
+//============================================================
+// include files
+//============================================================
+#include <drv_conf.h>
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <rtw_byteorder.h>
+
+#include <rtl8723a_hal.h>
+
+//============================================================
+// Global var
+//============================================================
+
+
+static VOID
+dm_CheckProtection(
+ IN PADAPTER Adapter
+ )
+{
+#if 0
+ PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo);
+ u1Byte CurRate, RateThreshold;
+
+ if(pMgntInfo->pHTInfo->bCurBW40MHz)
+ RateThreshold = MGN_MCS1;
+ else
+ RateThreshold = MGN_MCS3;
+
+ if(Adapter->TxStats.CurrentInitTxRate <= RateThreshold)
+ {
+ pMgntInfo->bDmDisableProtect = TRUE;
+ DbgPrint("Forced disable protect: %x\n", Adapter->TxStats.CurrentInitTxRate);
+ }
+ else
+ {
+ pMgntInfo->bDmDisableProtect = FALSE;
+ DbgPrint("Enable protect: %x\n", Adapter->TxStats.CurrentInitTxRate);
+ }
+#endif
+}
+
+static VOID
+dm_CheckStatistics(
+ IN PADAPTER Adapter
+ )
+{
+#if 0
+ if(!Adapter->MgntInfo.bMediaConnect)
+ return;
+
+ //2008.12.10 tynli Add for getting Current_Tx_Rate_Reg flexibly.
+ rtw_hal_get_hwreg( Adapter, HW_VAR_INIT_TX_RATE, (pu1Byte)(&Adapter->TxStats.CurrentInitTxRate) );
+
+ // Calculate current Tx Rate(Successful transmited!!)
+
+ // Calculate current Rx Rate(Successful received!!)
+
+ //for tx tx retry count
+ rtw_hal_get_hwreg( Adapter, HW_VAR_RETRY_COUNT, (pu1Byte)(&Adapter->TxStats.NumTxRetryCount) );
+#endif
+}
+
+static void dm_CheckPbcGPIO(_adapter *padapter)
+{
+ u8 tmp1byte;
+ u8 bPbcPressed = _FALSE;
+
+ if(!padapter->registrypriv.hw_wps_pbc)
+ return;
+
+#ifdef CONFIG_USB_HCI
+ tmp1byte = rtw_read8(padapter, GPIO_IO_SEL);
+ tmp1byte |= (HAL_8192C_HW_GPIO_WPS_BIT);
+ rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as output mode
+
+ tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
+ rtw_write8(padapter, GPIO_IN, tmp1byte); //reset the floating voltage level
+
+ tmp1byte = rtw_read8(padapter, GPIO_IO_SEL);
+ tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT);
+ rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as input mode
+
+ tmp1byte =rtw_read8(padapter, GPIO_IN);
+
+ if (tmp1byte == 0xff)
+ return ;
+
+ if (tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)
+ {
+ bPbcPressed = _TRUE;
+ }
+#else
+ tmp1byte = rtw_read8(padapter, GPIO_IN);
+ //RT_TRACE(COMP_IO, DBG_TRACE, ("dm_CheckPbcGPIO - %x\n", tmp1byte));
+
+ if (tmp1byte == 0xff || padapter->init_adpt_in_progress)
+ return ;
+
+ if((tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)==0)
+ {
+ bPbcPressed = _TRUE;
+ }
+#endif
+
+ if( _TRUE == bPbcPressed)
+ {
+ // Here we only set bPbcPressed to true
+ // After trigger PBC, the variable will be set to false
+ DBG_8192C("CheckPbcGPIO - PBC is pressed\n");
+
+#ifdef RTK_DMP_PLATFORM
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12))
+ kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_NET_PBC);
+#else
+ kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_NET_PBC);
+#endif
+#else
+
+ if ( padapter->pid[0] == 0 )
+ { // 0 is the default value and it means the application monitors the HW PBC doesn't privde its pid to driver.
+ return;
+ }
+
+#ifdef PLATFORM_LINUX
+ rtw_signal_process(padapter->pid[0], SIGUSR1);
+#endif
+#endif
+ }
+}
+
+#ifdef CONFIG_PCI_HCI
+//
+// Description:
+// Perform interrupt migration dynamically to reduce CPU utilization.
+//
+// Assumption:
+// 1. Do not enable migration under WIFI test.
+//
+// Created by Roger, 2010.03.05.
+//
+VOID
+dm_InterruptMigration(
+ IN PADAPTER Adapter
+ )
+{
+ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
+ struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv);
+ BOOLEAN bCurrentIntMt, bCurrentACIntDisable;
+ BOOLEAN IntMtToSet = _FALSE;
+ BOOLEAN ACIntToSet = _FALSE;
+
+
+ // Retrieve current interrupt migration and Tx four ACs IMR settings first.
+ bCurrentIntMt = pHalData->bInterruptMigration;
+ bCurrentACIntDisable = pHalData->bDisableTxInt;
+
+ //
+ // <Roger_Notes> Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics
+ // when interrupt migration is set before. 2010.03.05.
+ //
+ if(!Adapter->registrypriv.wifi_spec &&
+ (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) &&
+ pmlmepriv->LinkDetectInfo.bHigherBusyTraffic)
+ {
+ IntMtToSet = _TRUE;
+
+ // To check whether we should disable Tx interrupt or not.
+ if(pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic )
+ ACIntToSet = _TRUE;
+ }
+
+ //Update current settings.
+ if( bCurrentIntMt != IntMtToSet ){
+ DBG_8192C("%s(): Update interrrupt migration(%d)\n",__FUNCTION__,IntMtToSet);
+ if(IntMtToSet)
+ {
+ //
+ // <Roger_Notes> Set interrrupt migration timer and corresponging Tx/Rx counter.
+ // timer 25ns*0xfa0=100us for 0xf packets.
+ // 2010.03.05.
+ //
+ rtw_write32(Adapter, REG_INT_MIG, 0xff000fa0);// 0x306:Rx, 0x307:Tx
+ pHalData->bInterruptMigration = IntMtToSet;
+ }
+ else
+ {
+ // Reset all interrupt migration settings.
+ rtw_write32(Adapter, REG_INT_MIG, 0);
+ pHalData->bInterruptMigration = IntMtToSet;
+ }
+ }
+
+ /*if( bCurrentACIntDisable != ACIntToSet ){
+ DBG_8192C("%s(): Update AC interrrupt(%d)\n",__FUNCTION__,ACIntToSet);
+ if(ACIntToSet) // Disable four ACs interrupts.
+ {
+ //
+ // <Roger_Notes> Disable VO, VI, BE and BK four AC interrupts to gain more efficient CPU utilization.
+ // When extremely highly Rx OK occurs, we will disable Tx interrupts.
+ // 2010.03.05.
+ //
+ UpdateInterruptMask8192CE( Adapter, 0, RT_AC_INT_MASKS );
+ pHalData->bDisableTxInt = ACIntToSet;
+ }
+ else// Enable four ACs interrupts.
+ {
+ UpdateInterruptMask8192CE( Adapter, RT_AC_INT_MASKS, 0 );
+ pHalData->bDisableTxInt = ACIntToSet;
+ }
+ }*/
+
+}
+
+#endif
+
+//
+// Initialize GPIO setting registers
+//
+static void
+dm_InitGPIOSetting(
+ IN PADAPTER Adapter
+ )
+{
+ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
+
+ u8 tmp1byte;
+
+ tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
+ tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
+
+ rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
+}
+//============================================================
+// functions
+//============================================================
+static void Init_ODM_ComInfo_8723a(PADAPTER Adapter)
+{
+
+ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
+ PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
+ u8 cut_ver,fab_ver;
+
+ //
+ // Init Value
+ //
+ _rtw_memset(pDM_Odm,0,sizeof(pDM_Odm));
+
+ pDM_Odm->Adapter = Adapter;
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PLATFORM,ODM_CE);
+ if(Adapter->interface_type == RTW_GSPI )
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,ODM_ITRF_SDIO);
+ else
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,Adapter->interface_type);//RTL871X_HCI_TYPE
+
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_IC_TYPE,ODM_RTL8723A);
+
+
+ if(IS_8723A_A_CUT(pHalData->VersionID))
+ {
+ fab_ver = ODM_UMC;
+ cut_ver = ODM_CUT_A;
+ }
+ else if(IS_8723A_B_CUT(pHalData->VersionID))
+ {
+ fab_ver = ODM_UMC;
+ cut_ver = ODM_CUT_B;
+ }
+ else
+ {
+ fab_ver = ODM_TSMC;
+ cut_ver = ODM_CUT_A;
+ }
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_FAB_VER,fab_ver);
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_CUT_VER,cut_ver);
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_MP_TEST_CHIP,IS_NORMAL_CHIP(pHalData->VersionID));
+
+#ifdef CONFIG_USB_HCI
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_BOARD_TYPE,pHalData->BoardType);
+
+ if(pHalData->BoardType == BOARD_USB_High_PA){
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_EXT_LNA,_TRUE);
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_EXT_PA,_TRUE);
+ }
+#endif
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PATCH_ID,pHalData->CustomerID);
+ // ODM_CMNINFO_BINHCT_TEST only for MP Team
+ ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_BWIFI_TEST,Adapter->registrypriv.wifi_spec);
+
+
+ if(pHalData->rf_type == RF_1T1R){
+ ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T1R);
+ }
+ else if(pHalData->rf_type == RF_2T2R){
+ ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_2T2R);
+ }
+ else if(pHalData->rf_type == RF_1T2R){
+ ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T2R);
+ }
+}
+static void Update_ODM_ComInfo_8723a(PADAPTER Adapter)
+{
+ struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
+ struct mlme_priv *pmlmepriv = &Adapter->mlmepriv;
+ struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter);
+ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
+ PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
+ struct dm_priv *pdmpriv = &pHalData->dmpriv;
+ int i;
+
+ pdmpriv->InitODMFlag = 0
+ | ODM_BB_DIG
+#ifdef CONFIG_ODM_REFRESH_RAMASK
+ | ODM_BB_RA_MASK
+#endif
+ | ODM_BB_DYNAMIC_TXPWR
+ | ODM_BB_FA_CNT
+ | ODM_BB_RSSI_MONITOR
+ | ODM_BB_CCK_PD
+ | ODM_BB_PWR_SAVE
+ | ODM_MAC_EDCA_TURBO
+ | ODM_RF_TX_PWR_TRACK
+ | ODM_RF_CALIBRATION
+#ifdef CONFIG_ODM_ADAPTIVITY
+ | ODM_BB_ADAPTIVITY
+#endif
+ ;
+
+#ifdef CONFIG_ANTENNA_DIVERSITY
+ if(pHalData->AntDivCfg)
+ pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV;
+#endif
+
+#if (MP_DRIVER==1)
+ if (Adapter->registrypriv.mp_mode == 1) {
+ pdmpriv->InitODMFlag = 0
+ | ODM_RF_CALIBRATION
+ | ODM_RF_TX_PWR_TRACK
+ ;
+ }
+#endif//(MP_DRIVER==1)
+
+#ifdef CONFIG_DISABLE_ODM
+ pdmpriv->InitODMFlag = 0;
+#endif//CONFIG_DISABLE_ODM
+
+ //
+ // Pointer reference
+ //
+ //ODM_CMNINFO_MAC_PHY_MODE pHalData->MacPhyMode92D
+ // ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_MAC_PHY_MODE,&(pDM_Odm->u1Byte_temp));
+
+ ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_ABILITY,pdmpriv->InitODMFlag);
+
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_TX_UNI,&(Adapter->xmitpriv.tx_bytes));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_RX_UNI,&(Adapter->recvpriv.rx_bytes));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_WM_MODE,&(pmlmeext->cur_wireless_mode));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_CHNL_OFFSET,&(pHalData->nCur40MhzPrimeSC));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_MODE,&(Adapter->securitypriv.dot11PrivacyAlgrthm));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BW,&(pHalData->CurrentChannelBW ));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_CHNL,&( pHalData->CurrentChannel));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_NET_CLOSED,&( Adapter->net_closed));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_MP_MODE,&(Adapter->registrypriv.mp_mode));
+
+ //================= only for 8192D =================
+ /*
+ //pHalData->CurrentBandType92D
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BAND,&(pDM_Odm->u1Byte_temp));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_GET_VALUE,&(pDM_Odm->u1Byte_temp));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BUDDY_ADAPTOR,&(pDM_Odm->PADAPTER_temp));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_IS_MASTER,&(pDM_Odm->u1Byte_temp));
+ //================= only for 8192D =================
+ // driver havn't those variable now
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_OPERATION,&(pDM_Odm->u1Byte_temp));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_DISABLE_EDCA,&(pDM_Odm->u1Byte_temp));
+ */
+
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SCAN,&(pmlmepriv->bScanInProcess));
+ ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_POWER_SAVING,&(pwrctrlpriv->bpower_saving));
+
+
+ for(i=0; i< NUM_STA; i++)
+ {
+ //pDM_Odm->pODM_StaInfo[i] = NULL;
+ ODM_CmnInfoPtrArrayHook(pDM_Odm, ODM_CMNINFO_STA_STATUS,i,NULL);
+ }
+}
+
+void
+rtl8723a_InitHalDm(
+ IN PADAPTER Adapter
+ )
+{
+ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
+ struct dm_priv *pdmpriv = &pHalData->dmpriv;
+ PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
+
+ u8 i;
+
+ pdmpriv->DM_Type = DM_Type_ByDriver;
+ pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE;
+
+#ifdef CONFIG_BT_COEXIST
+ pdmpriv->DMFlag |= DYNAMIC_FUNC_BT;
+// btdm_InitBtCoexistDM(Adapter); // Move to BT_CoexistMechanism()
+#endif
+ pdmpriv->InitDMFlag = pdmpriv->DMFlag;
+
+ Update_ODM_ComInfo_8723a(Adapter);
+ ODM_DMInit(pDM_Odm);
+ // Save REG_INIDATA_RATE_SEL value for TXDESC.
+ for(i = 0 ; i<32 ; i++)
+ {
+ pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL+i) & 0x3f;
+ }
+
+}
+
+VOID
+rtl8723a_HalDmWatchDog(
+ IN PADAPTER Adapter
+ )
+{
+ BOOLEAN bFwCurrentInPSMode = _FALSE;
+ BOOLEAN bFwPSAwake = _TRUE;
+ u8 hw_init_completed = _FALSE;
+ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
+ struct dm_priv *pdmpriv = &pHalData->dmpriv;
+#ifdef CONFIG_CONCURRENT_MODE
+ PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter;
+#endif //CONFIG_CONCURRENT_MODE
+
+ hw_init_completed = Adapter->hw_init_completed;
+
+ if (hw_init_completed == _FALSE)
+ goto skip_dm;
+
+#ifdef CONFIG_LPS
+ bFwCurrentInPSMode = adapter_to_pwrctl(Adapter)->bFwCurrentInPSMode;
+ rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake));
+#endif
+
+#ifdef CONFIG_P2P_PS
+ // Fw is under p2p powersaving mode, driver should stop dynamic mechanism.
+ // modifed by thomas. 2011.06.11.
+ if(Adapter->wdinfo.p2p_ps_mode)
+ bFwPSAwake = _FALSE;
+#endif //CONFIG_P2P_PS
+
+ if( (hw_init_completed == _TRUE)
+ && ((!bFwCurrentInPSMode) && bFwPSAwake))
+ {
+ //
+ // Calculate Tx/Rx statistics.
+ //
+ dm_CheckStatistics(Adapter);
+
+
+#ifdef CONFIG_CONCURRENT_MODE
+ if(Adapter->adapter_type > PRIMARY_ADAPTER)
+ goto _record_initrate;
+#endif
+
+ //
+ // Dynamically switch RTS/CTS protection.
+ //
+ //dm_CheckProtection(Adapter);
+
+#ifdef CONFIG_PCI_HCI
+ // 20100630 Joseph: Disable Interrupt Migration mechanism temporarily because it degrades Rx throughput.
+ // Tx Migration settings.
+ //dm_InterruptMigration(Adapter);
+
+ //if(Adapter->HalFunc.TxCheckStuckHandler(Adapter))
+ // PlatformScheduleWorkItem(&(GET_HAL_DATA(Adapter)->HalResetWorkItem));
+#endif
+_record_initrate:
+
+ // Read REG_INIDATA_RATE_SEL value for TXDESC.
+ if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE)
+ {
+ pdmpriv->INIDATA_RATE[0] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL) & 0x3f;
+ }
+ else
+ {
+ u8 i;
+ for(i=1 ; i < (Adapter->stapriv.asoc_sta_count + 1); i++)
+ {
+ pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, (REG_INIDATA_RATE_SEL+i)) & 0x3f;
+ }
+ }
+ }
+
+
+ //ODM
+ if (hw_init_completed == _TRUE)
+ {
+ u8 bLinked=_FALSE;
+
+ #ifdef CONFIG_DISABLE_ODM
+ pHalData->odmpriv.SupportAbility = 0;
+ #endif
+
+ if(rtw_linked_check(Adapter))
+ bLinked = _TRUE;
+
+#ifdef CONFIG_CONCURRENT_MODE
+ if(pbuddy_adapter && rtw_linked_check(pbuddy_adapter))
+ bLinked = _TRUE;
+#endif //CONFIG_CONCURRENT_MODE
+
+ ODM_CmnInfoUpdate(&pHalData->odmpriv ,ODM_CMNINFO_LINK, bLinked);
+ ODM_DMWatchdog(&pHalData->odmpriv);
+
+ }
+
+skip_dm:
+
+ // Check GPIO to determine current RF on/off and Pbc status.
+ // Check Hardware Radio ON/OFF or not
+#ifdef CONFIG_PCI_HCI
+ if(pHalData->bGpioHwWpsPbc)
+#endif
+ {
+ dm_CheckPbcGPIO(Adapter); // Add by hpfan 2008-03-11
+ }
+
+}
+
+void rtl8723a_init_dm_priv(IN PADAPTER Adapter)
+{
+ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
+ struct dm_priv *pdmpriv = &pHalData->dmpriv;
+ PDM_ODM_T podmpriv = &pHalData->odmpriv;
+ _rtw_memset(pdmpriv, 0, sizeof(struct dm_priv));
+ Init_ODM_ComInfo_8723a(Adapter);
+#ifdef CONFIG_SW_ANTENNA_DIVERSITY
+ //_init_timer(&(pdmpriv->SwAntennaSwitchTimer), Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter);
+ ODM_InitAllTimers(podmpriv );
+#endif
+}
+
+void rtl8723a_deinit_dm_priv(IN PADAPTER Adapter)
+{
+ PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter);
+ struct dm_priv *pdmpriv = &pHalData->dmpriv;
+ PDM_ODM_T podmpriv = &pHalData->odmpriv;
+#ifdef CONFIG_SW_ANTENNA_DIVERSITY
+ //_cancel_timer_ex(&pdmpriv->SwAntennaSwitchTimer);
+ ODM_CancelAllTimers(podmpriv);
+#endif
+}
+
|