diff options
Diffstat (limited to 'drivers/net/wireless/rtl8723as/include/rtw_bt_mp.h')
-rwxr-xr-x | drivers/net/wireless/rtl8723as/include/rtw_bt_mp.h | 636 |
1 files changed, 318 insertions, 318 deletions
diff --git a/drivers/net/wireless/rtl8723as/include/rtw_bt_mp.h b/drivers/net/wireless/rtl8723as/include/rtw_bt_mp.h index 9a73aa3d1f33..15746616f470 100755 --- a/drivers/net/wireless/rtl8723as/include/rtw_bt_mp.h +++ b/drivers/net/wireless/rtl8723as/include/rtw_bt_mp.h @@ -1,318 +1,318 @@ -/****************************************************************************** - * - * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA - * - * - ******************************************************************************/ - -#ifndef __RTW_BT_MP_H -#define __RTW_BT_MP_H - -#include <osdep_service.h> -#include <drv_types.h> -#include <rtw_mp.h> - - -#if(MP_DRIVER == 1) - -#pragma pack(1) - -// definition for BT_UP_OP_BT_READY -#define MP_BT_NOT_READY 0 -#define MP_BT_READY 1 - -// definition for BT_UP_OP_BT_SET_MODE -typedef enum _MP_BT_MODE{ - MP_BT_MODE_RF_TXRX_TEST_MODE = 0, - MP_BT_MODE_BT20_DUT_TEST_MODE = 1, - MP_BT_MODE_BT40_DIRECT_TEST_MODE = 2, - MP_BT_MODE_CONNECT_TEST_MODE = 3, - MP_BT_MODE_MAX -}MP_BT_MODE,*PMP_BT_MODE; - - -// definition for BT_UP_OP_BT_SET_TX_RX_PARAMETER -typedef struct _BT_TXRX_PARAMETERS{ - u1Byte txrxChannel; - u4Byte txrxTxPktCnt; - u1Byte txrxTxPktInterval; - u1Byte txrxPayloadType; - u1Byte txrxPktType; - u2Byte txrxPayloadLen; - u4Byte txrxPktHeader; - u1Byte txrxWhitenCoeff; - u1Byte txrxBdaddr[6]; - u1Byte txrxTxGainIndex; -} BT_TXRX_PARAMETERS, *PBT_TXRX_PARAMETERS; - -// txrxPktType -typedef enum _MP_BT_PKT_TYPE{ - MP_BT_PKT_DH1 = 0, - MP_BT_PKT_DH3 = 1, - MP_BT_PKT_DH5 = 2, - MP_BT_PKT_2DH1 = 3, - MP_BT_PKT_2DH3 = 4, - MP_BT_PKT_2DH5 = 5, - MP_BT_PKT_3DH1 = 6, - MP_BT_PKT_3DH3 = 7, - MP_BT_PKT_3DH5 = 8, - MP_BT_PKT_LE = 9, - MP_BT_PKT_MAX -}MP_BT_PKT_TYPE,*PMP_BT_PKT_TYPE; -// txrxPayloadType -typedef enum _MP_BT_PAYLOAD_TYPE{ - MP_BT_PAYLOAD_01010101 = 0, - MP_BT_PAYLOAD_ALL_1 = 1, - MP_BT_PAYLOAD_ALL_0 = 2, - MP_BT_PAYLOAD_11110000 = 3, - MP_BT_PAYLOAD_PRBS9 = 4, - MP_BT_PAYLOAD_MAX -}MP_BT_PAYLOAD_TYPE,*PMP_BT_PAYLOAD_TYPE; - - -// definition for BT_UP_OP_BT_TEST_CTRL -typedef enum _MP_BT_TEST_CTRL{ - MP_BT_TEST_STOP_ALL_TESTS = 0, - MP_BT_TEST_START_RX_TEST = 1, - MP_BT_TEST_START_PACKET_TX_TEST = 2, - MP_BT_TEST_START_CONTINUOUS_TX_TEST = 3, - MP_BT_TEST_START_INQUIRY_SCAN_TEST = 4, - MP_BT_TEST_START_PAGE_SCAN_TEST = 5, - MP_BT_TEST_START_INQUIRY_PAGE_SCAN_TEST = 6, - MP_BT_TEST_START_LEGACY_CONNECT_TEST = 7, - MP_BT_TEST_START_LE_CONNECT_TEST_INITIATOR = 8, - MP_BT_TEST_START_LE_CONNECT_TEST_ADVERTISER = 9, - MP_BT_TEST_MAX -}MP_BT_TEST_CTRL,*PMP_BT_TEST_CTRL; - - -typedef enum _RTL_EXT_C2H_EVT -{ - EXT_C2H_WIFI_FW_ACTIVE_RSP = 0, - EXT_C2H_TRIG_BY_BT_FW = 1, - MAX_EXT_C2HEVENT -}RTL_EXT_C2H_EVT; - - -// return status definition to the user layer -typedef enum _BT_CTRL_STATUS{ - BT_STATUS_SUCCESS = 0x00, // Success - BT_STATUS_BT_OP_SUCCESS = 0x01, // bt fw op execution success - BT_STATUS_H2C_SUCCESS = 0x02, // H2c success - BT_STATUS_H2C_TIMTOUT = 0x03, // H2c timeout - BT_STATUS_H2C_BT_NO_RSP = 0x04, // H2c sent, bt no rsp - BT_STATUS_C2H_SUCCESS = 0x05, // C2h success - BT_STATUS_C2H_REQNUM_MISMATCH = 0x06, // bt fw wrong rsp - BT_STATUS_OPCODE_U_VERSION_MISMATCH = 0x07, // Upper layer OP code version mismatch. - BT_STATUS_OPCODE_L_VERSION_MISMATCH = 0x08, // Lower layer OP code version mismatch. - BT_STATUS_UNKNOWN_OPCODE_U = 0x09, // Unknown Upper layer OP code - BT_STATUS_UNKNOWN_OPCODE_L = 0x0a, // Unknown Lower layer OP code - BT_STATUS_PARAMETER_FORMAT_ERROR_U = 0x0b, // Wrong parameters sent by upper layer. - BT_STATUS_PARAMETER_FORMAT_ERROR_L = 0x0c, // bt fw parameter format is not consistency - BT_STATUS_PARAMETER_OUT_OF_RANGE_U = 0x0d, // uppery layer parameter value is out of range - BT_STATUS_PARAMETER_OUT_OF_RANGE_L = 0x0e, // bt fw parameter value is out of range - BT_STATUS_UNKNOWN_STATUS_L = 0x0f, // bt returned an defined status code - BT_STATUS_UNKNOWN_STATUS_H = 0x10, // driver need to do error handle or not handle-well. - BT_STATUS_WRONG_LEVEL = 0x11, // should be under passive level - BT_STATUS_MAX -}BT_CTRL_STATUS,*PBT_CTRL_STATUS; - -// OP codes definition between the user layer and driver -typedef enum _BT_CTRL_OPCODE_UPPER{ - BT_UP_OP_BT_READY = 0x00, - BT_UP_OP_BT_SET_MODE = 0x01, - BT_UP_OP_BT_SET_TX_RX_PARAMETER = 0x02, - BT_UP_OP_BT_SET_GENERAL = 0x03, - BT_UP_OP_BT_GET_GENERAL = 0x04, - BT_UP_OP_BT_TEST_CTRL = 0x05, - BT_UP_OP_TEST_BT = 0x06, - BT_UP_OP_MAX -}BT_CTRL_OPCODE_UPPER,*PBT_CTRL_OPCODE_UPPER; - - -typedef enum _BT_SET_GENERAL{ - BT_GSET_REG = 0x00, - BT_GSET_RESET = 0x01, - BT_GSET_TARGET_BD_ADDR = 0x02, - BT_GSET_TX_PWR_FINETUNE = 0x03, - BT_SET_TRACKING_INTERVAL = 0x04, - BT_SET_THERMAL_METER = 0x05, - BT_ENABLE_CFO_TRACKING = 0x06, - BT_GSET_UPDATE_BT_PATCH = 0x07, - BT_GSET_MAX -}BT_SET_GENERAL,*PBT_SET_GENERAL; - -typedef enum _BT_GET_GENERAL{ - BT_GGET_REG = 0x00, - BT_GGET_STATUS = 0x01, - BT_GGET_REPORT = 0x02, - BT_GGET_AFH_MAP = 0x03, - BT_GGET_AFH_STATUS = 0x04, - BT_GGET_MAX -}BT_GET_GENERAL,*PBT_GET_GENERAL; - -// definition for BT_UP_OP_BT_SET_GENERAL -typedef enum _BT_REG_TYPE{ - BT_REG_RF = 0, - BT_REG_MODEM = 1, - BT_REG_BLUEWIZE = 2, - BT_REG_VENDOR = 3, - BT_REG_LE = 4, - BT_REG_MAX -}BT_REG_TYPE,*PBT_REG_TYPE; - -// definition for BT_LO_OP_GET_AFH_MAP -typedef enum _BT_AFH_MAP_TYPE{ - BT_AFH_MAP_RESULT = 0, - BT_AFH_MAP_WIFI_PSD_ONLY = 1, - BT_AFH_MAP_WIFI_CH_BW_ONLY = 2, - BT_AFH_MAP_BT_PSD_ONLY = 3, - BT_AFH_MAP_HOST_CLASSIFICATION_ONLY = 4, - BT_AFH_MAP_MAX -}BT_AFH_MAP_TYPE,*PBT_AFH_MAP_TYPE; - -// definition for BT_UP_OP_BT_GET_GENERAL -typedef enum _BT_REPORT_TYPE{ - BT_REPORT_RX_PACKET_CNT = 0, - BT_REPORT_RX_ERROR_BITS = 1, - BT_REPORT_RSSI = 2, - BT_REPORT_CFO_HDR_QUALITY = 3, - BT_REPORT_CONNECT_TARGET_BD_ADDR = 4, - BT_REPORT_MAX -}BT_REPORT_TYPE,*PBT_REPORT_TYPE; - -VOID -MPTBT_Test( - IN PADAPTER Adapter, - IN u1Byte opCode, - IN u1Byte byte1, - IN u1Byte byte2, - IN u1Byte byte3 - ); - -NDIS_STATUS -MPTBT_SendOidBT( - IN PADAPTER pAdapter, - IN PVOID InformationBuffer, - IN ULONG InformationBufferLength, - OUT PULONG BytesRead, - OUT PULONG BytesNeeded - ); - -VOID -MPTBT_FwC2hBtMpCtrl( - PADAPTER Adapter, - pu1Byte tmpBuf, - u1Byte length - ); - -void MPh2c_timeout_handle(void *FunctionContext); - -VOID mptbt_BtControlProcess( - PADAPTER Adapter, - PVOID pInBuf - ); - -#define BT_H2C_MAX_RETRY 1 -#define BT_MAX_C2H_LEN 20 - -typedef struct _BT_REQ_CMD{ - UCHAR opCodeVer; - UCHAR OpCode; - USHORT paraLength; - UCHAR pParamStart[100]; -} BT_REQ_CMD, *PBT_REQ_CMD; - -typedef struct _BT_RSP_CMD{ - USHORT status; - USHORT paraLength; - UCHAR pParamStart[100]; -} BT_RSP_CMD, *PBT_RSP_CMD; - - -typedef struct _BT_H2C{ - u1Byte opCodeVer:4; - u1Byte reqNum:4; - u1Byte opCode; - u1Byte buf[100]; -}BT_H2C, *PBT_H2C; - - - -typedef struct _BT_EXT_C2H{ - u1Byte extendId; - u1Byte statusCode:4; - u1Byte retLen:4; - u1Byte opCodeVer:4; - u1Byte reqNum:4; - u1Byte buf[100]; -}BT_EXT_C2H, *PBT_EXT_C2H; - -typedef enum _BT_OPCODE_STATUS{ - BT_OP_STATUS_SUCCESS = 0x00, // Success - BT_OP_STATUS_VERSION_MISMATCH = 0x01, - BT_OP_STATUS_UNKNOWN_OPCODE = 0x02, - BT_OP_STATUS_ERROR_PARAMETER = 0x03, - BT_OP_STATUS_MAX -}BT_OPCODE_STATUS,*PBT_OPCODE_STATUS; - - -//OP codes definition between driver and bt fw -typedef enum _BT_CTRL_OPCODE_LOWER{ - BT_LO_OP_GET_BT_VERSION = 0x00, - BT_LO_OP_RESET = 0x01, - BT_LO_OP_TEST_CTRL = 0x02, - BT_LO_OP_SET_BT_MODE = 0x03, - BT_LO_OP_SET_CHNL_TX_GAIN = 0x04, - BT_LO_OP_SET_PKT_TYPE_LEN = 0x05, - BT_LO_OP_SET_PKT_CNT_L_PL_TYPE = 0x06, - BT_LO_OP_SET_PKT_CNT_H_PKT_INTV = 0x07, - BT_LO_OP_SET_PKT_HEADER = 0x08, - BT_LO_OP_SET_WHITENCOEFF = 0x09, - BT_LO_OP_SET_BD_ADDR_L = 0x0a, - BT_LO_OP_SET_BD_ADDR_H = 0x0b, - BT_LO_OP_WRITE_REG_ADDR = 0x0c, - BT_LO_OP_WRITE_REG_VALUE = 0x0d, - BT_LO_OP_GET_BT_STATUS = 0x0e, - BT_LO_OP_GET_BD_ADDR_L = 0x0f, - BT_LO_OP_GET_BD_ADDR_H = 0x10, - BT_LO_OP_READ_REG = 0x11, - BT_LO_OP_SET_TARGET_BD_ADDR_L = 0x12, - BT_LO_OP_SET_TARGET_BD_ADDR_H = 0x13, - BT_LO_OP_SET_TX_POWER_CALIBRATION = 0x14, - BT_LO_OP_GET_RX_PKT_CNT_L = 0x15, - BT_LO_OP_GET_RX_PKT_CNT_H = 0x16, - BT_LO_OP_GET_RX_ERROR_BITS_L = 0x17, - BT_LO_OP_GET_RX_ERROR_BITS_H = 0x18, - BT_LO_OP_GET_RSSI = 0x19, - BT_LO_OP_GET_CFO_HDR_QUALITY_L = 0x1a, - BT_LO_OP_GET_CFO_HDR_QUALITY_H = 0x1b, - BT_LO_OP_GET_TARGET_BD_ADDR_L = 0x1c, - BT_LO_OP_GET_TARGET_BD_ADDR_H = 0x1d, - BT_LO_OP_GET_AFH_MAP_L = 0x1e, - BT_LO_OP_GET_AFH_MAP_M = 0x1f, - BT_LO_OP_GET_AFH_MAP_H = 0x20, - BT_LO_OP_GET_AFH_STATUS = 0x21, - BT_LO_OP_SET_TRACKING_INTERVAL = 0x22, - BT_LO_OP_SET_THERMAL_METER = 0x23, - BT_LO_OP_ENABLE_CFO_TRACKING = 0x24, - BT_LO_OP_MAX -}BT_CTRL_OPCODE_LOWER,*PBT_CTRL_OPCODE_LOWER; - -#endif /* #if(MP_DRIVER == 1) */ - -#endif // #ifndef __INC_MPT_BT_H - +/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef __RTW_BT_MP_H
+#define __RTW_BT_MP_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include <rtw_mp.h>
+
+
+#if(MP_DRIVER == 1)
+
+#pragma pack(1)
+
+// definition for BT_UP_OP_BT_READY
+#define MP_BT_NOT_READY 0
+#define MP_BT_READY 1
+
+// definition for BT_UP_OP_BT_SET_MODE
+typedef enum _MP_BT_MODE{
+ MP_BT_MODE_RF_TXRX_TEST_MODE = 0,
+ MP_BT_MODE_BT20_DUT_TEST_MODE = 1,
+ MP_BT_MODE_BT40_DIRECT_TEST_MODE = 2,
+ MP_BT_MODE_CONNECT_TEST_MODE = 3,
+ MP_BT_MODE_MAX
+}MP_BT_MODE,*PMP_BT_MODE;
+
+
+// definition for BT_UP_OP_BT_SET_TX_RX_PARAMETER
+typedef struct _BT_TXRX_PARAMETERS{
+ u1Byte txrxChannel;
+ u4Byte txrxTxPktCnt;
+ u1Byte txrxTxPktInterval;
+ u1Byte txrxPayloadType;
+ u1Byte txrxPktType;
+ u2Byte txrxPayloadLen;
+ u4Byte txrxPktHeader;
+ u1Byte txrxWhitenCoeff;
+ u1Byte txrxBdaddr[6];
+ u1Byte txrxTxGainIndex;
+} BT_TXRX_PARAMETERS, *PBT_TXRX_PARAMETERS;
+
+// txrxPktType
+typedef enum _MP_BT_PKT_TYPE{
+ MP_BT_PKT_DH1 = 0,
+ MP_BT_PKT_DH3 = 1,
+ MP_BT_PKT_DH5 = 2,
+ MP_BT_PKT_2DH1 = 3,
+ MP_BT_PKT_2DH3 = 4,
+ MP_BT_PKT_2DH5 = 5,
+ MP_BT_PKT_3DH1 = 6,
+ MP_BT_PKT_3DH3 = 7,
+ MP_BT_PKT_3DH5 = 8,
+ MP_BT_PKT_LE = 9,
+ MP_BT_PKT_MAX
+}MP_BT_PKT_TYPE,*PMP_BT_PKT_TYPE;
+// txrxPayloadType
+typedef enum _MP_BT_PAYLOAD_TYPE{
+ MP_BT_PAYLOAD_01010101 = 0,
+ MP_BT_PAYLOAD_ALL_1 = 1,
+ MP_BT_PAYLOAD_ALL_0 = 2,
+ MP_BT_PAYLOAD_11110000 = 3,
+ MP_BT_PAYLOAD_PRBS9 = 4,
+ MP_BT_PAYLOAD_MAX
+}MP_BT_PAYLOAD_TYPE,*PMP_BT_PAYLOAD_TYPE;
+
+
+// definition for BT_UP_OP_BT_TEST_CTRL
+typedef enum _MP_BT_TEST_CTRL{
+ MP_BT_TEST_STOP_ALL_TESTS = 0,
+ MP_BT_TEST_START_RX_TEST = 1,
+ MP_BT_TEST_START_PACKET_TX_TEST = 2,
+ MP_BT_TEST_START_CONTINUOUS_TX_TEST = 3,
+ MP_BT_TEST_START_INQUIRY_SCAN_TEST = 4,
+ MP_BT_TEST_START_PAGE_SCAN_TEST = 5,
+ MP_BT_TEST_START_INQUIRY_PAGE_SCAN_TEST = 6,
+ MP_BT_TEST_START_LEGACY_CONNECT_TEST = 7,
+ MP_BT_TEST_START_LE_CONNECT_TEST_INITIATOR = 8,
+ MP_BT_TEST_START_LE_CONNECT_TEST_ADVERTISER = 9,
+ MP_BT_TEST_MAX
+}MP_BT_TEST_CTRL,*PMP_BT_TEST_CTRL;
+
+
+typedef enum _RTL_EXT_C2H_EVT
+{
+ EXT_C2H_WIFI_FW_ACTIVE_RSP = 0,
+ EXT_C2H_TRIG_BY_BT_FW = 1,
+ MAX_EXT_C2HEVENT
+}RTL_EXT_C2H_EVT;
+
+
+// return status definition to the user layer
+typedef enum _BT_CTRL_STATUS{
+ BT_STATUS_SUCCESS = 0x00, // Success
+ BT_STATUS_BT_OP_SUCCESS = 0x01, // bt fw op execution success
+ BT_STATUS_H2C_SUCCESS = 0x02, // H2c success
+ BT_STATUS_H2C_TIMTOUT = 0x03, // H2c timeout
+ BT_STATUS_H2C_BT_NO_RSP = 0x04, // H2c sent, bt no rsp
+ BT_STATUS_C2H_SUCCESS = 0x05, // C2h success
+ BT_STATUS_C2H_REQNUM_MISMATCH = 0x06, // bt fw wrong rsp
+ BT_STATUS_OPCODE_U_VERSION_MISMATCH = 0x07, // Upper layer OP code version mismatch.
+ BT_STATUS_OPCODE_L_VERSION_MISMATCH = 0x08, // Lower layer OP code version mismatch.
+ BT_STATUS_UNKNOWN_OPCODE_U = 0x09, // Unknown Upper layer OP code
+ BT_STATUS_UNKNOWN_OPCODE_L = 0x0a, // Unknown Lower layer OP code
+ BT_STATUS_PARAMETER_FORMAT_ERROR_U = 0x0b, // Wrong parameters sent by upper layer.
+ BT_STATUS_PARAMETER_FORMAT_ERROR_L = 0x0c, // bt fw parameter format is not consistency
+ BT_STATUS_PARAMETER_OUT_OF_RANGE_U = 0x0d, // uppery layer parameter value is out of range
+ BT_STATUS_PARAMETER_OUT_OF_RANGE_L = 0x0e, // bt fw parameter value is out of range
+ BT_STATUS_UNKNOWN_STATUS_L = 0x0f, // bt returned an defined status code
+ BT_STATUS_UNKNOWN_STATUS_H = 0x10, // driver need to do error handle or not handle-well.
+ BT_STATUS_WRONG_LEVEL = 0x11, // should be under passive level
+ BT_STATUS_MAX
+}BT_CTRL_STATUS,*PBT_CTRL_STATUS;
+
+// OP codes definition between the user layer and driver
+typedef enum _BT_CTRL_OPCODE_UPPER{
+ BT_UP_OP_BT_READY = 0x00,
+ BT_UP_OP_BT_SET_MODE = 0x01,
+ BT_UP_OP_BT_SET_TX_RX_PARAMETER = 0x02,
+ BT_UP_OP_BT_SET_GENERAL = 0x03,
+ BT_UP_OP_BT_GET_GENERAL = 0x04,
+ BT_UP_OP_BT_TEST_CTRL = 0x05,
+ BT_UP_OP_TEST_BT = 0x06,
+ BT_UP_OP_MAX
+}BT_CTRL_OPCODE_UPPER,*PBT_CTRL_OPCODE_UPPER;
+
+
+typedef enum _BT_SET_GENERAL{
+ BT_GSET_REG = 0x00,
+ BT_GSET_RESET = 0x01,
+ BT_GSET_TARGET_BD_ADDR = 0x02,
+ BT_GSET_TX_PWR_FINETUNE = 0x03,
+ BT_SET_TRACKING_INTERVAL = 0x04,
+ BT_SET_THERMAL_METER = 0x05,
+ BT_ENABLE_CFO_TRACKING = 0x06,
+ BT_GSET_UPDATE_BT_PATCH = 0x07,
+ BT_GSET_MAX
+}BT_SET_GENERAL,*PBT_SET_GENERAL;
+
+typedef enum _BT_GET_GENERAL{
+ BT_GGET_REG = 0x00,
+ BT_GGET_STATUS = 0x01,
+ BT_GGET_REPORT = 0x02,
+ BT_GGET_AFH_MAP = 0x03,
+ BT_GGET_AFH_STATUS = 0x04,
+ BT_GGET_MAX
+}BT_GET_GENERAL,*PBT_GET_GENERAL;
+
+// definition for BT_UP_OP_BT_SET_GENERAL
+typedef enum _BT_REG_TYPE{
+ BT_REG_RF = 0,
+ BT_REG_MODEM = 1,
+ BT_REG_BLUEWIZE = 2,
+ BT_REG_VENDOR = 3,
+ BT_REG_LE = 4,
+ BT_REG_MAX
+}BT_REG_TYPE,*PBT_REG_TYPE;
+
+// definition for BT_LO_OP_GET_AFH_MAP
+typedef enum _BT_AFH_MAP_TYPE{
+ BT_AFH_MAP_RESULT = 0,
+ BT_AFH_MAP_WIFI_PSD_ONLY = 1,
+ BT_AFH_MAP_WIFI_CH_BW_ONLY = 2,
+ BT_AFH_MAP_BT_PSD_ONLY = 3,
+ BT_AFH_MAP_HOST_CLASSIFICATION_ONLY = 4,
+ BT_AFH_MAP_MAX
+}BT_AFH_MAP_TYPE,*PBT_AFH_MAP_TYPE;
+
+// definition for BT_UP_OP_BT_GET_GENERAL
+typedef enum _BT_REPORT_TYPE{
+ BT_REPORT_RX_PACKET_CNT = 0,
+ BT_REPORT_RX_ERROR_BITS = 1,
+ BT_REPORT_RSSI = 2,
+ BT_REPORT_CFO_HDR_QUALITY = 3,
+ BT_REPORT_CONNECT_TARGET_BD_ADDR = 4,
+ BT_REPORT_MAX
+}BT_REPORT_TYPE,*PBT_REPORT_TYPE;
+
+VOID
+MPTBT_Test(
+ IN PADAPTER Adapter,
+ IN u1Byte opCode,
+ IN u1Byte byte1,
+ IN u1Byte byte2,
+ IN u1Byte byte3
+ );
+
+NDIS_STATUS
+MPTBT_SendOidBT(
+ IN PADAPTER pAdapter,
+ IN PVOID InformationBuffer,
+ IN ULONG InformationBufferLength,
+ OUT PULONG BytesRead,
+ OUT PULONG BytesNeeded
+ );
+
+VOID
+MPTBT_FwC2hBtMpCtrl(
+ PADAPTER Adapter,
+ pu1Byte tmpBuf,
+ u1Byte length
+ );
+
+void MPh2c_timeout_handle(void *FunctionContext);
+
+VOID mptbt_BtControlProcess(
+ PADAPTER Adapter,
+ PVOID pInBuf
+ );
+
+#define BT_H2C_MAX_RETRY 1
+#define BT_MAX_C2H_LEN 20
+
+typedef struct _BT_REQ_CMD{
+ UCHAR opCodeVer;
+ UCHAR OpCode;
+ USHORT paraLength;
+ UCHAR pParamStart[100];
+} BT_REQ_CMD, *PBT_REQ_CMD;
+
+typedef struct _BT_RSP_CMD{
+ USHORT status;
+ USHORT paraLength;
+ UCHAR pParamStart[100];
+} BT_RSP_CMD, *PBT_RSP_CMD;
+
+
+typedef struct _BT_H2C{
+ u1Byte opCodeVer:4;
+ u1Byte reqNum:4;
+ u1Byte opCode;
+ u1Byte buf[100];
+}BT_H2C, *PBT_H2C;
+
+
+
+typedef struct _BT_EXT_C2H{
+ u1Byte extendId;
+ u1Byte statusCode:4;
+ u1Byte retLen:4;
+ u1Byte opCodeVer:4;
+ u1Byte reqNum:4;
+ u1Byte buf[100];
+}BT_EXT_C2H, *PBT_EXT_C2H;
+
+typedef enum _BT_OPCODE_STATUS{
+ BT_OP_STATUS_SUCCESS = 0x00, // Success
+ BT_OP_STATUS_VERSION_MISMATCH = 0x01,
+ BT_OP_STATUS_UNKNOWN_OPCODE = 0x02,
+ BT_OP_STATUS_ERROR_PARAMETER = 0x03,
+ BT_OP_STATUS_MAX
+}BT_OPCODE_STATUS,*PBT_OPCODE_STATUS;
+
+
+//OP codes definition between driver and bt fw
+typedef enum _BT_CTRL_OPCODE_LOWER{
+ BT_LO_OP_GET_BT_VERSION = 0x00,
+ BT_LO_OP_RESET = 0x01,
+ BT_LO_OP_TEST_CTRL = 0x02,
+ BT_LO_OP_SET_BT_MODE = 0x03,
+ BT_LO_OP_SET_CHNL_TX_GAIN = 0x04,
+ BT_LO_OP_SET_PKT_TYPE_LEN = 0x05,
+ BT_LO_OP_SET_PKT_CNT_L_PL_TYPE = 0x06,
+ BT_LO_OP_SET_PKT_CNT_H_PKT_INTV = 0x07,
+ BT_LO_OP_SET_PKT_HEADER = 0x08,
+ BT_LO_OP_SET_WHITENCOEFF = 0x09,
+ BT_LO_OP_SET_BD_ADDR_L = 0x0a,
+ BT_LO_OP_SET_BD_ADDR_H = 0x0b,
+ BT_LO_OP_WRITE_REG_ADDR = 0x0c,
+ BT_LO_OP_WRITE_REG_VALUE = 0x0d,
+ BT_LO_OP_GET_BT_STATUS = 0x0e,
+ BT_LO_OP_GET_BD_ADDR_L = 0x0f,
+ BT_LO_OP_GET_BD_ADDR_H = 0x10,
+ BT_LO_OP_READ_REG = 0x11,
+ BT_LO_OP_SET_TARGET_BD_ADDR_L = 0x12,
+ BT_LO_OP_SET_TARGET_BD_ADDR_H = 0x13,
+ BT_LO_OP_SET_TX_POWER_CALIBRATION = 0x14,
+ BT_LO_OP_GET_RX_PKT_CNT_L = 0x15,
+ BT_LO_OP_GET_RX_PKT_CNT_H = 0x16,
+ BT_LO_OP_GET_RX_ERROR_BITS_L = 0x17,
+ BT_LO_OP_GET_RX_ERROR_BITS_H = 0x18,
+ BT_LO_OP_GET_RSSI = 0x19,
+ BT_LO_OP_GET_CFO_HDR_QUALITY_L = 0x1a,
+ BT_LO_OP_GET_CFO_HDR_QUALITY_H = 0x1b,
+ BT_LO_OP_GET_TARGET_BD_ADDR_L = 0x1c,
+ BT_LO_OP_GET_TARGET_BD_ADDR_H = 0x1d,
+ BT_LO_OP_GET_AFH_MAP_L = 0x1e,
+ BT_LO_OP_GET_AFH_MAP_M = 0x1f,
+ BT_LO_OP_GET_AFH_MAP_H = 0x20,
+ BT_LO_OP_GET_AFH_STATUS = 0x21,
+ BT_LO_OP_SET_TRACKING_INTERVAL = 0x22,
+ BT_LO_OP_SET_THERMAL_METER = 0x23,
+ BT_LO_OP_ENABLE_CFO_TRACKING = 0x24,
+ BT_LO_OP_MAX
+}BT_CTRL_OPCODE_LOWER,*PBT_CTRL_OPCODE_LOWER;
+
+#endif /* #if(MP_DRIVER == 1) */
+
+#endif // #ifndef __INC_MPT_BT_H
+
|