diff options
Diffstat (limited to 'drivers/net/wireless/rtl8723as/include/rtw_led.h')
| -rwxr-xr-x | drivers/net/wireless/rtl8723as/include/rtw_led.h | 438 |
1 files changed, 219 insertions, 219 deletions
diff --git a/drivers/net/wireless/rtl8723as/include/rtw_led.h b/drivers/net/wireless/rtl8723as/include/rtw_led.h index b017eb19138d..2bba754ca81f 100755 --- a/drivers/net/wireless/rtl8723as/include/rtw_led.h +++ b/drivers/net/wireless/rtl8723as/include/rtw_led.h @@ -16,222 +16,222 @@ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * - ******************************************************************************/ -#ifndef __RTW_LED_H_ -#define __RTW_LED_H_ - -#include <drv_conf.h> -#include <osdep_service.h> -#include <drv_types.h> - -#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000) - -#define LED_BLINK_NORMAL_INTERVAL 100 -#define LED_BLINK_SLOWLY_INTERVAL 200 -#define LED_BLINK_LONG_INTERVAL 400 - -#define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000 -#define LED_BLINK_LINK_INTERVAL_ALPHA 500 //500 -#define LED_BLINK_SCAN_INTERVAL_ALPHA 180 //150 -#define LED_BLINK_FASTER_INTERVAL_ALPHA 50 -#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000 - -#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100 -#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000 - -#define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000 -#define LED_BLINK_NORMAL_INTERVAL_PORNET 100 - -#define LED_BLINK_FAST_INTERVAL_BITLAND 30 - -// 060403, rcnjko: Customized for AzWave. -#define LED_CM2_BLINK_ON_INTERVAL 250 -#define LED_CM2_BLINK_OFF_INTERVAL 4750 - -#define LED_CM8_BLINK_INTERVAL 500 //for QMI -#define LED_CM8_BLINK_OFF_INTERVAL 3750 //for QMI - -// 080124, lanhsin: Customized for RunTop -#define LED_RunTop_BLINK_INTERVAL 300 - -// 060421, rcnjko: Customized for Sercomm Printer Server case. -#define LED_CM3_BLINK_INTERVAL 1500 - -typedef enum _LED_CTL_MODE{ - LED_CTL_POWER_ON = 1, - LED_CTL_LINK = 2, - LED_CTL_NO_LINK = 3, - LED_CTL_TX = 4, - LED_CTL_RX = 5, - LED_CTL_SITE_SURVEY = 6, - LED_CTL_POWER_OFF = 7, - LED_CTL_START_TO_LINK = 8, - LED_CTL_START_WPS = 9, - LED_CTL_STOP_WPS = 10, - LED_CTL_START_WPS_BOTTON = 11, //added for runtop - LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA - LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN - LED_CTL_CONNECTION_NO_TRANSFER = 14, -}LED_CTL_MODE; - -typedef enum _LED_STATE_871x{ - LED_UNKNOWN = 0, - RTW_LED_ON = 1, - RTW_LED_OFF = 2, - LED_BLINK_NORMAL = 3, - LED_BLINK_SLOWLY = 4, - LED_BLINK_POWER_ON = 5, - LED_BLINK_SCAN = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning. - LED_BLINK_NO_LINK = 7, // LED is blinking during no link state. - LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case - LED_BLINK_TXRX = 9, - LED_BLINK_WPS = 10, // LED is blinkg during WPS communication - LED_BLINK_WPS_STOP = 11, //for ALPHA - LED_BLINK_WPS_STOP_OVERLAP = 12, //for BELKIN - LED_BLINK_RUNTOP = 13, // Customized for RunTop - LED_BLINK_CAMEO = 14, - LED_BLINK_XAVI = 15, - LED_BLINK_ALWAYS_ON = 16, -}LED_STATE_871x; - -typedef enum _LED_PIN_871x{ - LED_PIN_NULL = 0, - LED_PIN_LED0 = 1, - LED_PIN_LED1 = 2, - LED_PIN_LED2 = 3, - LED_PIN_GPIO0 = 4, -}LED_PIN_871x; - -typedef struct _LED_871x{ - _adapter *padapter; - - LED_PIN_871x LedPin; // Identify how to implement this SW led. - LED_STATE_871x CurrLedState; // Current LED state. - LED_STATE_871x BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are. - - u8 bLedOn; // true if LED is ON, false if LED is OFF. - - u8 bLedBlinkInProgress; // true if it is blinking, false o.w.. - - u8 bLedWPSBlinkInProgress; - - u32 BlinkTimes; // Number of times to toggle led state for blinking. - - _timer BlinkTimer; // Timer object for led blinking. - -#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) - u8 bSWLedCtrl; - - // ALPHA, added by chiyoko, 20090106 - u8 bLedNoLinkBlinkInProgress; - u8 bLedLinkBlinkInProgress; - u8 bLedStartToLinkBlinkInProgress; - u8 bLedScanBlinkInProgress; - - #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)|| defined PLATFORM_FREEBSD - _workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED. - #endif -#endif //defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) - -#if defined(CONFIG_PCI_HCI) - u8 bLedSlowBlinkInProgress;//added by vivi, for led new mode -#endif - -} LED_871x, *PLED_871x; - -#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) - -#define IS_LED_WPS_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \ - || ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \ - || ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress) - -#define IS_LED_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \ - ||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress) - -//================================================================================ -// LED customization. -//================================================================================ - -typedef enum _LED_STRATEGY_871x{ - SW_LED_MODE0 = 0, // SW control 1 LED via GPIO0. It is default option. - SW_LED_MODE1= 1, // 2 LEDs, through LED0 and LED1. For ALPHA. - SW_LED_MODE2 = 2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard. - SW_LED_MODE3 = 3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case. - SW_LED_MODE4 = 4, //for Edimax / Belkin - SW_LED_MODE5 = 5, //for Sercomm / Belkin - SW_LED_MODE6 = 6, //for 88CU minicard, porting from ce SW_LED_MODE7 - HW_LED = 50, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.) - LED_ST_NONE = 99, -}LED_STRATEGY_871x, *PLED_STRATEGY_871x; - -void -LedControl871x( - _adapter *padapter, - LED_CTL_MODE LedAction - ); -#endif //defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI) - -#if defined(CONFIG_PCI_HCI) -//================================================================================ -// LED customization. -//================================================================================ - -typedef enum _LED_STRATEGY_871x{ - SW_LED_MODE0 = 0, // SW control 1 LED via GPIO0. It is default option. - SW_LED_MODE1 = 1, // SW control for PCI Express - SW_LED_MODE2 = 2, // SW control for Cameo. - SW_LED_MODE3 = 3, // SW contorl for RunTop. - SW_LED_MODE4 = 4, // SW control for Netcore - SW_LED_MODE5 = 5, //added by vivi, for led new mode, DLINK - SW_LED_MODE6 = 6, //added by vivi, for led new mode, PRONET - SW_LED_MODE7 = 7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec - SW_LED_MODE8 = 8, //added by chiyokolin, for QMI - SW_LED_MODE9 = 9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1 - SW_LED_MODE10 = 10, //added by chiyokolin, for Edimax-ASUS - HW_LED = 50, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes) - LED_ST_NONE = 99, -}LED_STRATEGY_871x, *PLED_STRATEGY_871x; -#endif //defined(CONFIG_PCI_HCI) - -struct led_priv{ - /* add for led controll */ - LED_871x SwLed0; - LED_871x SwLed1; - LED_STRATEGY_871x LedStrategy; - u8 bRegUseLed; - void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction); - /* add for led controll */ -}; - -#ifdef CONFIG_SW_LED -#define rtw_led_control(adapter, LedAction) \ - do { \ - if((adapter)->ledpriv.LedControlHandler) \ - (adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \ - } while(0) -#else //CONFIG_SW_LED -#define rtw_led_control(adapter, LedAction) -#endif //CONFIG_SW_LED - -void BlinkTimerCallback(void *data); -void BlinkWorkItemCallback(struct work_struct *work); - -void ResetLedStatus(PLED_871x pLed); - -void -InitLed871x( - _adapter *padapter, - PLED_871x pLed, - LED_PIN_871x LedPin - ); - -void -DeInitLed871x( - PLED_871x pLed - ); - -//hal... -extern void BlinkHandler(PLED_871x pLed); - -#endif //__RTW_LED_H_ - + ******************************************************************************/
+#ifndef __RTW_LED_H_
+#define __RTW_LED_H_
+
+#include <drv_conf.h>
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000)
+
+#define LED_BLINK_NORMAL_INTERVAL 100
+#define LED_BLINK_SLOWLY_INTERVAL 200
+#define LED_BLINK_LONG_INTERVAL 400
+
+#define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000
+#define LED_BLINK_LINK_INTERVAL_ALPHA 500 //500
+#define LED_BLINK_SCAN_INTERVAL_ALPHA 180 //150
+#define LED_BLINK_FASTER_INTERVAL_ALPHA 50
+#define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000
+
+#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100
+#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000
+
+#define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000
+#define LED_BLINK_NORMAL_INTERVAL_PORNET 100
+
+#define LED_BLINK_FAST_INTERVAL_BITLAND 30
+
+// 060403, rcnjko: Customized for AzWave.
+#define LED_CM2_BLINK_ON_INTERVAL 250
+#define LED_CM2_BLINK_OFF_INTERVAL 4750
+
+#define LED_CM8_BLINK_INTERVAL 500 //for QMI
+#define LED_CM8_BLINK_OFF_INTERVAL 3750 //for QMI
+
+// 080124, lanhsin: Customized for RunTop
+#define LED_RunTop_BLINK_INTERVAL 300
+
+// 060421, rcnjko: Customized for Sercomm Printer Server case.
+#define LED_CM3_BLINK_INTERVAL 1500
+
+typedef enum _LED_CTL_MODE{
+ LED_CTL_POWER_ON = 1,
+ LED_CTL_LINK = 2,
+ LED_CTL_NO_LINK = 3,
+ LED_CTL_TX = 4,
+ LED_CTL_RX = 5,
+ LED_CTL_SITE_SURVEY = 6,
+ LED_CTL_POWER_OFF = 7,
+ LED_CTL_START_TO_LINK = 8,
+ LED_CTL_START_WPS = 9,
+ LED_CTL_STOP_WPS = 10,
+ LED_CTL_START_WPS_BOTTON = 11, //added for runtop
+ LED_CTL_STOP_WPS_FAIL = 12, //added for ALPHA
+ LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, //added for BELKIN
+ LED_CTL_CONNECTION_NO_TRANSFER = 14,
+}LED_CTL_MODE;
+
+typedef enum _LED_STATE_871x{
+ LED_UNKNOWN = 0,
+ RTW_LED_ON = 1,
+ RTW_LED_OFF = 2,
+ LED_BLINK_NORMAL = 3,
+ LED_BLINK_SLOWLY = 4,
+ LED_BLINK_POWER_ON = 5,
+ LED_BLINK_SCAN = 6, // LED is blinking during scanning period, the # of times to blink is depend on time for scanning.
+ LED_BLINK_NO_LINK = 7, // LED is blinking during no link state.
+ LED_BLINK_StartToBlink = 8,// Customzied for Sercomm Printer Server case
+ LED_BLINK_TXRX = 9,
+ LED_BLINK_WPS = 10, // LED is blinkg during WPS communication
+ LED_BLINK_WPS_STOP = 11, //for ALPHA
+ LED_BLINK_WPS_STOP_OVERLAP = 12, //for BELKIN
+ LED_BLINK_RUNTOP = 13, // Customized for RunTop
+ LED_BLINK_CAMEO = 14,
+ LED_BLINK_XAVI = 15,
+ LED_BLINK_ALWAYS_ON = 16,
+}LED_STATE_871x;
+
+typedef enum _LED_PIN_871x{
+ LED_PIN_NULL = 0,
+ LED_PIN_LED0 = 1,
+ LED_PIN_LED1 = 2,
+ LED_PIN_LED2 = 3,
+ LED_PIN_GPIO0 = 4,
+}LED_PIN_871x;
+
+typedef struct _LED_871x{
+ _adapter *padapter;
+
+ LED_PIN_871x LedPin; // Identify how to implement this SW led.
+ LED_STATE_871x CurrLedState; // Current LED state.
+ LED_STATE_871x BlinkingLedState; // Next state for blinking, either RTW_LED_ON or RTW_LED_OFF are.
+
+ u8 bLedOn; // true if LED is ON, false if LED is OFF.
+
+ u8 bLedBlinkInProgress; // true if it is blinking, false o.w..
+
+ u8 bLedWPSBlinkInProgress;
+
+ u32 BlinkTimes; // Number of times to toggle led state for blinking.
+
+ _timer BlinkTimer; // Timer object for led blinking.
+
+#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
+ u8 bSWLedCtrl;
+
+ // ALPHA, added by chiyoko, 20090106
+ u8 bLedNoLinkBlinkInProgress;
+ u8 bLedLinkBlinkInProgress;
+ u8 bLedStartToLinkBlinkInProgress;
+ u8 bLedScanBlinkInProgress;
+
+ #if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)|| defined PLATFORM_FREEBSD
+ _workitem BlinkWorkItem; // Workitem used by BlinkTimer to manipulate H/W to blink LED.
+ #endif
+#endif //defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
+
+#if defined(CONFIG_PCI_HCI)
+ u8 bLedSlowBlinkInProgress;//added by vivi, for led new mode
+#endif
+
+} LED_871x, *PLED_871x;
+
+#if defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
+
+#define IS_LED_WPS_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS \
+ || ((PLED_871x)_LED_871x)->CurrLedState==LED_BLINK_WPS_STOP \
+ || ((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress)
+
+#define IS_LED_BLINKING(_LED_871x) (((PLED_871x)_LED_871x)->bLedWPSBlinkInProgress \
+ ||((PLED_871x)_LED_871x)->bLedScanBlinkInProgress)
+
+//================================================================================
+// LED customization.
+//================================================================================
+
+typedef enum _LED_STRATEGY_871x{
+ SW_LED_MODE0 = 0, // SW control 1 LED via GPIO0. It is default option.
+ SW_LED_MODE1= 1, // 2 LEDs, through LED0 and LED1. For ALPHA.
+ SW_LED_MODE2 = 2, // SW control 1 LED via GPIO0, customized for AzWave 8187 minicard.
+ SW_LED_MODE3 = 3, // SW control 1 LED via GPIO0, customized for Sercomm Printer Server case.
+ SW_LED_MODE4 = 4, //for Edimax / Belkin
+ SW_LED_MODE5 = 5, //for Sercomm / Belkin
+ SW_LED_MODE6 = 6, //for 88CU minicard, porting from ce SW_LED_MODE7
+ HW_LED = 50, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes, see MAC.CONFIG1 for details.)
+ LED_ST_NONE = 99,
+}LED_STRATEGY_871x, *PLED_STRATEGY_871x;
+
+void
+LedControl871x(
+ _adapter *padapter,
+ LED_CTL_MODE LedAction
+ );
+#endif //defined(CONFIG_USB_HCI) || defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
+
+#if defined(CONFIG_PCI_HCI)
+//================================================================================
+// LED customization.
+//================================================================================
+
+typedef enum _LED_STRATEGY_871x{
+ SW_LED_MODE0 = 0, // SW control 1 LED via GPIO0. It is default option.
+ SW_LED_MODE1 = 1, // SW control for PCI Express
+ SW_LED_MODE2 = 2, // SW control for Cameo.
+ SW_LED_MODE3 = 3, // SW contorl for RunTop.
+ SW_LED_MODE4 = 4, // SW control for Netcore
+ SW_LED_MODE5 = 5, //added by vivi, for led new mode, DLINK
+ SW_LED_MODE6 = 6, //added by vivi, for led new mode, PRONET
+ SW_LED_MODE7 = 7, //added by chiyokolin, for Lenovo, PCI Express Minicard Spec Rev.1.2 spec
+ SW_LED_MODE8 = 8, //added by chiyokolin, for QMI
+ SW_LED_MODE9 = 9, //added by chiyokolin, for BITLAND, PCI Express Minicard Spec Rev.1.1
+ SW_LED_MODE10 = 10, //added by chiyokolin, for Edimax-ASUS
+ HW_LED = 50, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
+ LED_ST_NONE = 99,
+}LED_STRATEGY_871x, *PLED_STRATEGY_871x;
+#endif //defined(CONFIG_PCI_HCI)
+
+struct led_priv{
+ /* add for led controll */
+ LED_871x SwLed0;
+ LED_871x SwLed1;
+ LED_STRATEGY_871x LedStrategy;
+ u8 bRegUseLed;
+ void (*LedControlHandler)(_adapter *padapter, LED_CTL_MODE LedAction);
+ /* add for led controll */
+};
+
+#ifdef CONFIG_SW_LED
+#define rtw_led_control(adapter, LedAction) \
+ do { \
+ if((adapter)->ledpriv.LedControlHandler) \
+ (adapter)->ledpriv.LedControlHandler((adapter), (LedAction)); \
+ } while(0)
+#else //CONFIG_SW_LED
+#define rtw_led_control(adapter, LedAction)
+#endif //CONFIG_SW_LED
+
+void BlinkTimerCallback(void *data);
+void BlinkWorkItemCallback(struct work_struct *work);
+
+void ResetLedStatus(PLED_871x pLed);
+
+void
+InitLed871x(
+ _adapter *padapter,
+ PLED_871x pLed,
+ LED_PIN_871x LedPin
+ );
+
+void
+DeInitLed871x(
+ PLED_871x pLed
+ );
+
+//hal...
+extern void BlinkHandler(PLED_871x pLed);
+
+#endif //__RTW_LED_H_
+
|