summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h')
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h415
1 files changed, 200 insertions, 215 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
index 32e135ab9a63..79103347d967 100644
--- a/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/pwrseq.h
@@ -11,10 +11,6 @@
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
@@ -30,297 +26,286 @@
#ifndef __RTL8723E_PWRSEQ_H__
#define __RTL8723E_PWRSEQ_H__
-/*
- Check document WM-20110607-Paul-RTL8188E_Power_Architecture-R02.vsd
- There are 6 HW Power States:
- 0: POFF--Power Off
- 1: PDN--Power Down
- 2: CARDEMU--Card Emulation
- 3: ACT--Active Mode
- 4: LPS--Low Power State
- 5: SUS--Suspend
-
- The transision from different states are defined below
- TRANS_CARDEMU_TO_ACT
- TRANS_ACT_TO_CARDEMU
- TRANS_CARDEMU_TO_SUS
- TRANS_SUS_TO_CARDEMU
- TRANS_CARDEMU_TO_PDN
- TRANS_ACT_TO_LPS
- TRANS_LPS_TO_ACT
-
- TRANS_END
- PWR SEQ Version: rtl8188e_PwrSeq_V09.h
-*/
-
-#define RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS 10
-#define RTL8188E_TRANS_SUS_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS 10
-#define RTL8188E_TRANS_PDN_TO_CARDEMU_STEPS 10
-#define RTL8188E_TRANS_ACT_TO_LPS_STEPS 15
-#define RTL8188E_TRANS_LPS_TO_ACT_STEPS 15
-#define RTL8188E_TRANS_END_STEPS 1
+#include "pwrseqcmd.h"
+/* Check document WM-20110607-Paul-RTL8188EE_Power_Architecture-R02.vsd
+ * There are 6 HW Power States:
+ * 0: POFF--Power Off
+ * 1: PDN--Power Down
+ * 2: CARDEMU--Card Emulation
+ * 3: ACT--Active Mode
+ * 4: LPS--Low Power State
+ * 5: SUS--Suspend
+ *
+ * The transision from different states are defined below
+ * TRANS_CARDEMU_TO_ACT
+ * TRANS_ACT_TO_CARDEMU
+ * TRANS_CARDEMU_TO_SUS
+ * TRANS_SUS_TO_CARDEMU
+ * TRANS_CARDEMU_TO_PDN
+ * TRANS_ACT_TO_LPS
+ * TRANS_LPS_TO_ACT
+ *
+ * TRANS_END
+ * PWR SEQ Version: rtl8188ee_PwrSeq_V09.h
+ */
+#define RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS 10
+#define RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS 10
+#define RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS 10
+#define RTL8188EE_TRANS_SUS_TO_CARDEMU_STEPS 10
+#define RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS 10
+#define RTL8188EE_TRANS_PDN_TO_CARDEMU_STEPS 10
+#define RTL8188EE_TRANS_ACT_TO_LPS_STEPS 15
+#define RTL8188EE_TRANS_LPS_TO_ACT_STEPS 15
+#define RTL8188EE_TRANS_END_STEPS 1
-#define RTL8188E_TRANS_CARDEMU_TO_ACT \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+/* The following macros have the following format:
+ * { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value
+ * comments },
+ */
+#define RTL8188EE_TRANS_CARDEMU_TO_ACT \
{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /* wait till 0x04[17] = 1 power ready*/ \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), BIT(1) \
+ /* wait till 0x04[17] = 1 power ready*/}, \
{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /* 0x02[1:0] = 0 reset BB*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0)|BIT(1), 0 \
+ /* 0x02[1:0] = 0 reset BB*/}, \
{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*0x24[23] = 2b'01 schmit trigger */ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \
+ /*0x24[23] = 2b'01 schmit trigger */}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /* 0x04[15] = 0 disable HWPDN (control by DRV)*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0 \
+ /* 0x04[15] = 0 disable HWPDN (control by DRV)*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*0x04[12:11] = 2b'00 disable WL suspend*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4)|BIT(3), 0 \
+ /*0x04[12:11] = 2b'00 disable WL suspend*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*0x04[8] = 1 polling until return 0*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), BIT(0) \
+ /*0x04[8] = 1 polling until return 0*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*wait till 0x04[8] = 0*/ \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(0), 0 \
+ /*wait till 0x04[8] = 0*/}, \
{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, /*LDO normal mode*/\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \
+ /*LDO normal mode*/}, \
{0x0074, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*SDIO Driving*/\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \
+ /*SDIO Driving*/},
-#define RTL8188E_TRANS_ACT_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_ACT_TO_CARDEMU \
{0x001F, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0},/*0x1F[7:0] = 0 turn off RF*/\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /*0x1F[7:0] = 0 turn off RF*/}, \
{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, /*LDO Sleep mode*/\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \
+ /*LDO Sleep mode*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*0x04[9] = 1 turn off MAC by HW state machine*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1) \
+ /*0x04[9] = 1 turn off MAC by HW state machine*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*wait till 0x04[9] = 0 polling until return 0 to disable*/ \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(1), 0 \
+ /*wait till 0x04[9] = 0 polling until return 0 to disable*/},
-
-#define RTL8188E_TRANS_CARDEMU_TO_SUS \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_CARDEMU_TO_SUS \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
- /*0x04[12:11] = 2b'01enable WL suspend*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3) \
+ /*0x04[12:11] = 2b'01enable WL suspend*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4)},\
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)|BIT(4) \
+ /*0x04[12:11] = 2b'11enable WL suspend for PCIe*/}, \
{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
- /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, BIT(7) \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */},\
{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
- /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */}, \
{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
- /*Set USB suspend enable local register 0xfe10[4]= 1 */ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \
+ /*Set USB suspend enable local register 0xfe10[4]=1 */}, \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- /*Set SDIO suspend local register*/ \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0) \
+ /*Set SDIO suspend local register*/}, \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- /*wait power state to suspend*/ \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0},
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0 \
+ /*wait power state to suspend*/},
-#define RTL8188E_TRANS_SUS_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_SUS_TO_CARDEMU \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- /*Set SDIO suspend local register*/ \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0}, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0 \
+ /*Set SDIO suspend local register*/}, \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- /*wait power state to suspend*/ \
- PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1)}, \
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1) \
+ /*wait power state to suspend*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*0x04[12:11] = 2b'01enable WL suspend*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0},
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), 0 \
+ /*0x04[12:11] = 2b'01enable WL suspend*/},
-#define RTL8188E_TRANS_CARDEMU_TO_CARDDIS \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_CARDEMU_TO_CARDDIS \
{0x0026, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*0x24[23] = 2b'01 schmit trigger */ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \
+ /*0x24[23] = 2b'01 schmit trigger */}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
- /*0x04[12:11] = 2b'01 enable WL suspend*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), BIT(3)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3) | BIT(4), BIT(3) \
+ /*0x04[12:11] = 2b'01 enable WL suspend*/}, \
{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
- /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /* 0x04[31:30] = 2b'10 enable enable bandgap mbias in suspend */},\
{0x0041, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, \
PWR_INTF_USB_MSK|PWR_INTF_SDIO_MSK, \
- /*Clear SIC_EN register 0x40[12] = 1'b0 */ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \
+ /*Clear SIC_EN register 0x40[12] = 1'b0 */}, \
{0xfe10, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
- /*Set USB suspend enable local register 0xfe10[4]= 1 */ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), BIT(4) \
+ /*Set USB suspend enable local register 0xfe10[4]=1 */}, \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- /*Set SDIO suspend local register*/ \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0)}, \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), BIT(0) \
+ /*Set SDIO suspend local register*/}, \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_CMD_POLLING, BIT(1), 0}, /*wait power state to suspend*/
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), 0 \
+ /*wait power state to suspend*/},
-#define RTL8188E_TRANS_CARDDIS_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_CARDDIS_TO_CARDEMU \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO,\
- PWR_CMD_WRITE, BIT(0), 0}, /*Set SDIO suspend local register*/ \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, BIT(0), 0 \
+ /*Set SDIO suspend local register*/}, \
{0x0086, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO,\
- PWR_CMD_POLLING, BIT(1), BIT(1)}, /*wait power state to suspend*/\
+ PWR_BASEADDR_SDIO, PWR_CMD_POLLING, BIT(1), BIT(1) \
+ /*wait power state to suspend*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, \
- PWR_CMD_WRITE, BIT(3)|BIT(4), 0}, \
- /*0x04[12:11] = 2b'01enable WL suspend*/
-
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(3)|BIT(4), 0 \
+ /*0x04[12:11] = 2b'01enable WL suspend*/},
-#define RTL8188E_TRANS_CARDEMU_TO_PDN \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_CARDEMU_TO_PDN \
{0x0006, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0},/* 0x04[16] = 0*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0/* 0x04[16] = 0*/}, \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7)},/* 0x04[15] = 1*/
-
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), BIT(7) \
+ /* 0x04[15] = 1*/},
-#define RTL8188E_TRANS_PDN_TO_CARDEMU \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_PDN_TO_CARDEMU \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0},/* 0x04[15] = 0*/
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(7), 0/* 0x04[15] = 0*/},
-
-#define RTL8188E_TRANS_ACT_TO_LPS \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_ACT_TO_LPS \
{0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F},/*Tx Pause*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x7F \
+ /*Tx Pause*/}, \
{0x05F8, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*zero if no pkt is tx*/\
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
{0x05F9, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*Should be zero if no packet is transmitting*/ \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
{0x05FA, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*Should be zero if no packet is transmitting*/ \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
{0x05FB, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*Should be zero if no packet is transmitting*/ \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, 0xFF, 0 \
+ /*Should be zero if no packet is transmitting*/}, \
{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*CCK and OFDM are disabled, and clock are gated*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(0), 0 \
+ /*CCK and OFDM are disabled,and clock are gated*/}, \
{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US},/*Delay 1us*/\
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_US \
+ /*Delay 1us*/}, \
{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F},/*Reset MAC TRX*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x3F \
+ /*Reset MAC TRX*/}, \
{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*check if removed later*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), 0 \
+ /*check if removed later*/}, \
{0x0553, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*Respond TxOK to scheduler*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(5), BIT(5) \
+ /*Respond TxOK to scheduler*/},
-#define RTL8188E_TRANS_LPS_TO_ACT \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, */\
+#define RTL8188EE_TRANS_LPS_TO_ACT \
{0x0080, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_SDIO_MSK, \
- PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84}, /*SDIO RPWM*/ \
+ PWR_BASEADDR_SDIO, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*SDIO RPWM*/}, \
{0xFE58, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*USB RPWM*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*USB RPWM*/}, \
{0x0361, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_PCI_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84}, /*PCIe RPWM*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0x84 \
+ /*PCIe RPWM*/}, \
{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS}, /*Delay*/ \
+ PWR_BASEADDR_MAC, PWR_CMD_DELAY, 0, PWRSEQ_DELAY_MS \
+ /*Delay*/}, \
{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*. 0x08[4] = 0 switch TSF to 40M*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(4), 0 \
+ /*. 0x08[4] = 0 switch TSF to 40M*/}, \
{0x0109, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*Polling 0x109[7]= 0 TSF in 40M*/ \
- PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_POLLING, BIT(7), 0 \
+ /*Polling 0x109[7]=0 TSF in 40M*/}, \
{0x0029, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*. 0x29[7:6] = 2b'00 enable BB clock*/ \
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(6)|BIT(7), 0 \
+ /*. 0x29[7:6] = 2b'00 enable BB clock*/}, \
{0x0101, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*. 0x101[1] = 1*/\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1)}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1), BIT(1) \
+ /*. 0x101[1] = 1*/}, \
{0x0100, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*. 0x100[7:0] = 0xFF enable WMAC TRX*/\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF}, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0xFF \
+ /*. 0x100[7:0] = 0xFF enable WMAC TRX*/}, \
{0x0002, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
- /*. 0x02[1:0] = 2b'11 enable BB macro*/\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0)}, \
- {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
- PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0}, /*. 0x522 = 0*/
-
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, BIT(1)|BIT(0), BIT(1)|BIT(0) \
+ /*. 0x02[1:0] = 2b'11 enable BB macro*/}, \
+ {0x0522, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK, \
+ PWR_BASEADDR_MAC, PWR_CMD_WRITE, 0xFF, 0 \
+ /*. 0x522 = 0*/},
-#define RTL8188E_TRANS_END \
- /* format */ \
- /* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value },*/\
+#define RTL8188EE_TRANS_END \
{0xFFFF, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_ALL_MSK,\
0, PWR_CMD_END, 0, 0}
-extern struct wlan_pwr_cfg rtl8188e_power_on_flow
- [RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_radio_off_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_card_disable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_card_enable_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_suspend_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_resume_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_hwpdn_flow
- [RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
- RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_enter_lps_flow
- [RTL8188E_TRANS_ACT_TO_LPS_STEPS +
- RTL8188E_TRANS_END_STEPS];
-extern struct wlan_pwr_cfg rtl8188e_leave_lps_flow
- [RTL8188E_TRANS_LPS_TO_ACT_STEPS +
- RTL8188E_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_power_on_flow
+ [RTL8188EE_TRANS_CARDEMU_TO_ACT_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_radio_off_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_card_disable_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_card_enable_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_suspend_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_resume_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_SUS_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_hwpdn_flow
+ [RTL8188EE_TRANS_ACT_TO_CARDEMU_STEPS +
+ RTL8188EE_TRANS_CARDEMU_TO_PDN_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_enter_lps_flow
+ [RTL8188EE_TRANS_ACT_TO_LPS_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
+extern struct wlan_pwr_cfg rtl8188ee_leave_lps_flow
+ [RTL8188EE_TRANS_LPS_TO_ACT_STEPS +
+ RTL8188EE_TRANS_END_STEPS];
/* RTL8723 Power Configuration CMDs for PCIe interface */
-#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188e_power_on_flow
-#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188e_radio_off_flow
-#define Rtl8188E_NIC_DISABLE_FLOW rtl8188e_card_disable_flow
-#define Rtl8188E_NIC_ENABLE_FLOW rtl8188e_card_enable_flow
-#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188e_suspend_flow
-#define Rtl8188E_NIC_RESUME_FLOW rtl8188e_resume_flow
-#define Rtl8188E_NIC_PDN_FLOW rtl8188e_hwpdn_flow
-#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188e_enter_lps_flow
-#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188e_leave_lps_flow
+#define RTL8188EE_NIC_PWR_ON_FLOW rtl8188ee_power_on_flow
+#define RTL8188EE_NIC_RF_OFF_FLOW rtl8188ee_radio_off_flow
+#define RTL8188EE_NIC_DISABLE_FLOW rtl8188ee_card_disable_flow
+#define RTL8188EE_NIC_ENABLE_FLOW rtl8188ee_card_enable_flow
+#define RTL8188EE_NIC_SUSPEND_FLOW rtl8188ee_suspend_flow
+#define RTL8188EE_NIC_RESUME_FLOW rtl8188ee_resume_flow
+#define RTL8188EE_NIC_PDN_FLOW rtl8188ee_hwpdn_flow
+#define RTL8188EE_NIC_LPS_ENTER_FLOW rtl8188ee_enter_lps_flow
+#define RTL8188EE_NIC_LPS_LEAVE_FLOW rtl8188ee_leave_lps_flow
#endif