diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8723as/autoconf_rtl8723a_usb_linux.h')
| -rwxr-xr-x | drivers/net/wireless/rtlwifi/rtl8723as/autoconf_rtl8723a_usb_linux.h | 342 |
1 files changed, 342 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8723as/autoconf_rtl8723a_usb_linux.h b/drivers/net/wireless/rtlwifi/rtl8723as/autoconf_rtl8723a_usb_linux.h new file mode 100755 index 000000000000..dfced1918d0c --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8723as/autoconf_rtl8723a_usb_linux.h @@ -0,0 +1,342 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#define CONFIG_ODM_REFRESH_RAMASK +#define CONFIG_PHY_SETTING_WITH_ODM + +/* + * Public General Config + */ + +#define AUTOCONF_INCLUDED + +#define RTL871X_MODULE_NAME "8723AS-VAU" +#define DRV_NAME "rtl8723as-vau" + +#define CONFIG_RTL8723A +#define CONFIG_USB_HCI +#define PLATFORM_LINUX + +#define CONFIG_EMBEDDED_FWIMG +//#define CONFIG_FILE_FWIMG + +/* + * Functions Config + */ + +#define CONFIG_XMIT_ACK +#ifdef CONFIG_XMIT_ACK + #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK +#endif +#define CONFIG_80211N_HT +#define CONFIG_RECV_REORDERING_CTRL + + +#define SUPPORT_HW_RFOFF_DETECTED + +//#define CONFIG_IOCTL_CFG80211 + +#ifdef CONFIG_IOCTL_CFG80211 + //#define RTW_USE_CFG80211_STA_EVENT /* Indecate new sta asoc through cfg80211_new_sta */ + #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER + //#define CONFIG_DEBUG_CFG80211 + #define CONFIG_SET_SCAN_DENY_TIMER +#endif + +#define CONFIG_AP_MODE +#ifdef CONFIG_AP_MODE + #define CONFIG_NATIVEAP_MLME + #ifndef CONFIG_NATIVEAP_MLME + #define CONFIG_HOSTAPD_MLME + #endif + //#define CONFIG_FIND_BEST_CHANNEL + //#define CONFIG_NO_WIRELESS_HANDLERS +#endif + +#define CONFIG_P2P +#ifdef CONFIG_P2P + //Added by Albert 20110812 + //The CONFIG_WFD is for supporting the Wi-Fi display + #define CONFIG_WFD + + #ifndef CONFIG_WIFI_TEST + #define CONFIG_P2P_REMOVE_GROUP_INFO + #endif + //#define CONFIG_DBG_P2P + + #define CONFIG_P2P_PS + //#define CONFIG_P2P_IPS + #define CONFIG_P2P_OP_CHK_SOCIAL_CH + #define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT +#endif + +// Added by Kurt 20110511 +//#define CONFIG_TDLS +#ifdef CONFIG_TDLS +// #ifndef CONFIG_WFD +// #define CONFIG_WFD +// #endif +// #define CONFIG_TDLS_AUTOSETUP +// #define CONFIG_TDLS_AUTOCHECKALIVE +#endif + +#define CONFIG_LAYER2_ROAMING +#define CONFIG_LAYER2_ROAMING_RESUME + +//#define CONFIG_CONCURRENT_MODE +#ifdef CONFIG_CONCURRENT_MODE + #define CONFIG_TSF_RESET_OFFLOAD // For 2 PORT TSF SYNC. + //#define CONFIG_HWPORT_SWAP //Port0->Sec , Port1 -> Pri + #define CONFIG_STA_MODE_SCAN_UNDER_AP_MODE +#endif // CONFIG_CONCURRENT_MODE + +#define CONFIG_SKB_COPY //for amsdu + +//#define CONFIG_LED + +#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface +//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general... +//#define CONFIG_RESUME_IN_WORKQUEUE +//#define CONFIG_SET_SCAN_DENY_TIMER +#define CONFIG_LONG_DELAY_ISSUE +#define CONFIG_NEW_SIGNAL_STAT_PROCESS +#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */ +#define CONFIG_DEAUTH_BEFORE_CONNECT + + +//#define CONFIG_ANTENNA_DIVERSITY +#ifdef CONFIG_ANTENNA_DIVERSITY +#define CONFIG_SW_ANTENNA_DIVERSITY +//#define CONFIG_HW_ANTENNA_DIVERSITY +#endif + + +/* + * Auto Config Section + */ + +#ifdef CONFIG_MP_INCLUDED + #define MP_DRIVER 1 + #define CONFIG_MP_IWPRIV_SUPPORT 1 + #define CONFIG_USB_INTERRUPT_IN_PIPE 1 + // disable unnecessary functions for MP + //#undef CONFIG_POWER_SAVING + //#undef CONFIG_BT_COEXIST + //#undef CONFIG_ANTENNA_DIVERSITY + //#undef SUPPORT_HW_RFOFF_DETECTED +#else // #ifdef CONFIG_MP_INCLUDED + #define MP_DRIVER 0 + #undef CONFIG_MP_IWPRIV_SUPPORT + #define CONFIG_LPS 1 +#endif // #ifdef CONFIG_MP_INCLUDED + + + +#ifdef CONFIG_LED + #define CONFIG_SW_LED + #ifdef CONFIG_SW_LED + //#define CONFIG_LED_HANDLED_BY_CMD_THREAD + #endif +#endif // CONFIG_LED + +#ifdef CONFIG_POWER_SAVING + +#define CONFIG_IPS +#define CONFIG_LPS +//#define CONFIG_LPS_LCLK +#endif // #ifdef CONFIG_POWER_SAVING + +#ifdef CONFIG_LPS_LCLK +#define CONFIG_XMIT_THREAD_MODE +#endif + +//#define CONFIG_BR_EXT // Enable NAT2.5 support for STA mode interface with a L2 Bridge +#ifdef CONFIG_BR_EXT +#define CONFIG_BR_EXT_BRNAME "br0" +#endif // CONFIG_BR_EXT + +//#define CONFIG_TX_MCAST2UNI // Support IP multicast->unicast +//#define CONFIG_CHECK_AC_LIFETIME // Check packet lifetime of 4 ACs. + +#if defined(CONFIG_BT_COEXIST) || defined(CONFIG_POWER_SAVING) +#ifndef CONFIG_USB_INTERRUPT_IN_PIPE +#define CONFIG_USB_INTERRUPT_IN_PIPE +#endif +#endif + +#if defined(CONFIG_BT_COEXIST) + #define CONFIG_CHECK_BT_HANG +#endif +/* + * Interface Related Config + */ +//#define CONFIG_USB_INTERRUPT_IN_PIPE + + +#define CONFIG_PREALLOC_RECV_SKB +//#define CONFIG_REDUCE_USB_TX_INT // Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. +//#define CONFIG_EASY_REPLACEMENT + +/* + * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now! + */ +//#define CONFIG_USE_USB_BUFFER_ALLOC_TX // Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. +//#define CONFIG_USE_USB_BUFFER_ALLOC_RX // For RX path +#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX +#undef CONFIG_PREALLOC_RECV_SKB +#endif + +/* + * USB VENDOR REQ BUFFER ALLOCATION METHOD + * if not set we'll use function local variable (stack memory) + */ +//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE +#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC + +#define CONFIG_USB_VENDOR_REQ_MUTEX +#define CONFIG_VENDOR_REQ_RETRY + +//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ + + +/* + * HAL Related Config + */ + +#define RTL8192C_RX_PACKET_INCLUDE_CRC 0 + +#define SUPPORTED_BLOCK_IO + + + +#define RTL8192CU_FW_DOWNLOAD_ENABLE 1 + +//#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0 + +#define CONFIG_OUT_EP_WIFI_MODE 0 + +#define ENABLE_USB_DROP_INCORRECT_OUT + +#define RTL8192CU_ASIC_VERIFICATION 0 // For ASIC verification. + +#define RTL8192CU_ADHOC_WORKAROUND_SETTING + +#define DISABLE_BB_RF 0 + +#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0 + +#ifdef CONFIG_MP_INCLUDED + #define MP_DRIVER 1 + #undef CONFIG_USB_TX_AGGREGATION + #undef CONFIG_USB_RX_AGGREGATION +#else + #define MP_DRIVER 0 +#endif + + +/* + * Platform Related Config + */ +#ifdef CONFIG_PLATFORM_MN10300 +#define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV + +#if defined (CONFIG_SW_ANTENNA_DIVERSITY) + #undef CONFIG_SW_ANTENNA_DIVERSITY + #define CONFIG_HW_ANTENNA_DIVERSITY +#endif + +#endif + +#ifdef CONFIG_WISTRON_PLATFORM + +#endif + +#ifdef CONFIG_PLATFORM_TI_DM365 +#define CONFIG_USE_USB_BUFFER_ALLOC_RX +#endif +/* + * Outsource Related Config + */ + +#define RTL8192CE_SUPPORT 0 +#define RTL8192CU_SUPPORT 0 +#define RTL8192C_SUPPORT (RTL8192CE_SUPPORT|RTL8192CU_SUPPORT) + +#define RTL8192DE_SUPPORT 0 +#define RTL8192DU_SUPPORT 0 +#define RTL8192D_SUPPORT (RTL8192DE_SUPPORT|RTL8192DU_SUPPORT) + +#define RTL8723AU_SUPPORT 1 +#define RTL8723AS_SUPPORT 0 +#define RTL8723AE_SUPPORT 0 +#define RTL8723A_SUPPORT (RTL8723AU_SUPPORT|RTL8723AS_SUPPORT|RTL8723AE_SUPPORT) + +#define RTL8723_FPGA_VERIFICATION 0 + +#define RTL8188EE_SUPPORT 0 +#define RTL8188EU_SUPPORT 0 +#define RTL8188ES_SUPPORT 0 +#define RTL8188E_SUPPORT (RTL8188EE_SUPPORT|RTL8188EU_SUPPORT|RTL8188ES_SUPPORT) +#define RTL8188E_FOR_TEST_CHIP 0 +//#if (RTL8188E_SUPPORT==1) +#define RATE_ADAPTIVE_SUPPORT 0 +#define POWER_TRAINING_ACTIVE 0 +//#endif + +#define CONFIG_80211D + +#define CONFIG_ATTEMPT_TO_FIX_AP_BEACON_ERROR + +/* + * Debug Related Config + */ +#define DBG 1 + +#define CONFIG_DEBUG /* DBG_871X, etc... */ +//#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */ + +#define CONFIG_PROC_DEBUG + +#define DBG_CONFIG_ERROR_DETECT +#define DBG_CONFIG_ERROR_RESET + +//#define DBG_IO +//#define DBG_DELAY_OS +//#define DBG_MEM_ALLOC +//#define DBG_IOCTL + +//#define DBG_TX +//#define DBG_XMIT_BUF +//#define DBG_TX_DROP_FRAME + +//#define DBG_RX_DROP_FRAME +//#define DBG_RX_SEQ + +//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE +//#define DBG_ROAMING_TEST + +//#define DBG_HAL_INIT_PROFILING + +//#define DBG_MEMORY_LEAK 1 + +//TX use 1 urb +//#define CONFIG_SINGLE_XMIT_BUF +//RX use 1 urb +//#define CONFIG_SINGLE_RECV_BUF + |