diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8723as/hal/OUTSRC/odm_debug.h')
| -rwxr-xr-x | drivers/net/wireless/rtlwifi/rtl8723as/hal/OUTSRC/odm_debug.h | 905 |
1 files changed, 905 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8723as/hal/OUTSRC/odm_debug.h b/drivers/net/wireless/rtlwifi/rtl8723as/hal/OUTSRC/odm_debug.h new file mode 100755 index 000000000000..7b7ecfc7ed6a --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8723as/hal/OUTSRC/odm_debug.h @@ -0,0 +1,905 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ + + +#ifndef __ODM_DBG_H__ +#define __ODM_DBG_H__ + + +//----------------------------------------------------------------------------- +// Define the debug levels +// +// 1. DBG_TRACE and DBG_LOUD are used for normal cases. +// So that, they can help SW engineer to develope or trace states changed +// and also help HW enginner to trace every operation to and from HW, +// e.g IO, Tx, Rx. +// +// 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases, +// which help us to debug SW or HW. +// +//----------------------------------------------------------------------------- +// +// Never used in a call to ODM_RT_TRACE()! +// +#define ODM_DBG_OFF 1 + +// +// Fatal bug. +// For example, Tx/Rx/IO locked up, OS hangs, memory access violation, +// resource allocation failed, unexpected HW behavior, HW BUG and so on. +// +#define ODM_DBG_SERIOUS 2 + +// +// Abnormal, rare, or unexpeted cases. +// For example, IRP/Packet/OID canceled, device suprisely unremoved and so on. +// +#define ODM_DBG_WARNING 3 + +// +// Normal case with useful information about current SW or HW state. +// For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status, +// SW protocol state change, dynamic mechanism state change and so on. +// +#define ODM_DBG_LOUD 4 + +// +// Normal case with detail execution flow or information. +// +#define ODM_DBG_TRACE 5 + +//----------------------------------------------------------------------------- +// Define the tracing components +// +//----------------------------------------------------------------------------- +//BB Functions +#define ODM_COMP_DIG BIT0 +#define ODM_COMP_RA_MASK BIT1 +#define ODM_COMP_DYNAMIC_TXPWR BIT2 +#define ODM_COMP_FA_CNT BIT3 +#define ODM_COMP_RSSI_MONITOR BIT4 +#define ODM_COMP_CCK_PD BIT5 +#define ODM_COMP_ANT_DIV BIT6 +#define ODM_COMP_PWR_SAVE BIT7 +#define ODM_COMP_PWR_TRAIN BIT8 +#define ODM_COMP_RATE_ADAPTIVE BIT9 +#define ODM_COMP_PATH_DIV BIT10 +#define ODM_COMP_PSD BIT11 +#define ODM_COMP_DYNAMIC_PRICCA BIT12 +#define ODM_COMP_RXHP BIT13 +//MAC Functions +#define ODM_COMP_EDCA_TURBO BIT16 +#define ODM_COMP_EARLY_MODE BIT17 +//RF Functions +#define ODM_COMP_TX_PWR_TRACK BIT24 +#define ODM_COMP_RX_GAIN_TRACK BIT25 +#define ODM_COMP_CALIBRATION BIT26 +//Common Functions +#define ODM_COMP_COMMON BIT30 +#define ODM_COMP_INIT BIT31 + +/*------------------------Export Marco Definition---------------------------*/ +#if (DM_ODM_SUPPORT_TYPE == ODM_MP) +#define RT_PRINTK DbgPrint +#elif (DM_ODM_SUPPORT_TYPE == ODM_CE) + #define DbgPrint printk + #define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args); +#else + #define DbgPrint panic_printk +#define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args); +#endif + +#ifndef ASSERT + #define ASSERT(expr) +#endif + +#if DBG +#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) \ + if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \ + { \ + if(pDM_Odm->SupportICType == ODM_RTL8192C) \ + DbgPrint("[ODM-92C] "); \ + else if(pDM_Odm->SupportICType == ODM_RTL8192D) \ + DbgPrint("[ODM-92D] "); \ + else if(pDM_Odm->SupportICType == ODM_RTL8723A) \ + DbgPrint("[ODM-8723A] "); \ + else if(pDM_Odm->SupportICType == ODM_RTL8188E) \ + DbgPrint("[ODM-8188E] "); \ + else if(pDM_Odm->SupportICType == ODM_RTL8812) \ + DbgPrint("[ODM-8812] "); \ + else if(pDM_Odm->SupportICType == ODM_RTL8821) \ + DbgPrint("[ODM-8821] "); \ + RT_PRINTK fmt; \ + } + +#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) \ + if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \ + { \ + RT_PRINTK fmt; \ + } + +#define ODM_RT_ASSERT(pDM_Odm, expr, fmt) \ + if(!(expr)) { \ + DbgPrint( "Assertion failed! %s at ......\n", #expr); \ + DbgPrint( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \ + RT_PRINTK fmt; \ + ASSERT(FALSE); \ + } +#define ODM_dbg_enter() { DbgPrint("==> %s\n", __FUNCTION__); } +#define ODM_dbg_exit() { DbgPrint("<== %s\n", __FUNCTION__); } +#define ODM_dbg_trace(str) { DbgPrint("%s:%s\n", __FUNCTION__, str); } + +#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) \ + if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \ + { \ + int __i; \ + pu1Byte __ptr = (pu1Byte)ptr; \ + DbgPrint("[ODM] "); \ + DbgPrint(title_str); \ + DbgPrint(" "); \ + for( __i=0; __i<6; __i++ ) \ + DbgPrint("%02X%s", __ptr[__i], (__i==5)?"":"-"); \ + DbgPrint("\n"); \ + } +#else +#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) +#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) +#define ODM_RT_ASSERT(pDM_Odm, expr, fmt) +#define ODM_dbg_enter() +#define ODM_dbg_exit() +#define ODM_dbg_trace(str) +#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) +#endif + + +VOID +ODM_InitDebugSetting( + IN PDM_ODM_T pDM_Odm + ); + + + +#if 0 +#if DBG +#define DbgPrint printk + +#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \ + { \ + char *szTitle = _TitleString; \ + pu1Byte pbtHexData = _HexData; \ + u4Byte u4bHexDataLen = _HexDataLen; \ + u4Byte __i; \ + DbgPrint("%s", szTitle); \ + for (__i=0;__i<u4bHexDataLen;__i++) \ + { \ + if ((__i & 15) == 0) \ + { \ + DbgPrint("\n"); \ + } \ + DbgPrint("%02X%s", pbtHexData[__i], ( ((__i&3)==3) ? " " : " ") ); \ + } \ + DbgPrint("\n"); \ + } + +// RT_PRINT_XXX macros: implemented for debugging purpose. +// Added by Annie, 2005-11-21. +#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) \ + if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \ + { \ + int __i; \ + pu1Byte ptr = (pu1Byte)_HexData; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + for( __i=0; __i<(int)_HexDataLen; __i++ ) \ + { \ + DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" "); \ + if (((__i + 1) % 16) == 0) DbgPrint("\n"); \ + } \ + DbgPrint("\n"); \ + } + +#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) \ + if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \ + { \ + int __i; \ + pu1Byte ptr = (pu1Byte)_Ptr; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + DbgPrint(" "); \ + for( __i=0; __i<6; __i++ ) \ + DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \ + DbgPrint("\n"); \ + } + +#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) \ + if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \ + { \ + int __i, __j; \ + pu1Byte ptr = (pu1Byte)_Ptr; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + DbgPrint("\n"); \ + for( __i=0; __i<(int)_AddNum; __i++ ) \ + { \ + for( __j=0; __j<6; __j++ ) \ + DbgPrint("%02X%s", ptr[__i*6+__j], (__j==5)?"":"-"); \ + DbgPrint("\n"); \ + } \ + } + +// Added by Annie, 2005-11-22. +#define MAX_STR_LEN 64 +#define PRINTABLE(_ch) (_ch>=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22. + +#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \ + if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \ + { \ + int __i; \ + u1Byte buffer[MAX_STR_LEN]; \ + int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \ + PlatformZeroMemory( buffer, MAX_STR_LEN ); \ + PlatformMoveMemory( buffer, (pu1Byte)_Ptr, length ); \ + for( __i=0; __i<MAX_STR_LEN; __i++ ) \ + { \ + if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \ + } \ + buffer[length] = '\0'; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + DbgPrint(": %d, <%s>\n", _Len, buffer); \ + } + +#else // of #if DBG +#define DbgPrint(...) +#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) +#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) +#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) +#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) +#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) +#endif // of #if DBG + +#endif + + +#if 0 +/* Define debug print header for every service module.*/ +typedef struct tag_ODM_DBGP_Service_Module_Header_Name_Structure +{ + const char *pMANS; + const char *pRTOS; + const char *pALM; + const char *pPEM; + const char *pCMPK; + const char *pRAPD; + const char *pTXPB; + const char *pQUMG; +}ODM_DBGP_HEAD_T; + + +/* Define different debug flag for dedicated service modules in debug flag array. */ +// Each module has independt 32 bit debug flag you cnn define the flag as yout require. +typedef enum tag_ODM_DBGP_Flag_Type_Definition +{ + ODM_FTX = 0, + ODM_FRX , + ODM_FPHY , + ODM_FPWR , + ODM_FDM , + ODM_FC2H , + ODM_FBT , + ODM_DBGP_TYPE_MAX +}ODM_DBGP_FLAG_E; + + +// Define TX relative debug bit --> FTX +#define ODM_TX_DESC BIT0 +#define ODM_TX_DESC_TID BIT1 +#define ODM_TX_PATH BIT2 + +// Define RX relative debug bit --> FRX +#define ODM_RX_DATA BIT0 +#define ODM_RX_PHY_STS BIT1 +#define ODM_RX_PHY_SS BIT2 +#define ODM_RX_PHY_SQ BIT3 +#define ODM_RX_PHY_ASTS BIT4 +#define ODM_RX_ERR_LEN BIT5 +#define ODM_RX_DEFRAG BIT6 +#define ODM_RX_ERR_RATE BIT7 +#define ODM_RX_PATH BIT8 +#define ODM_RX_BEACON BIT9 + +// Define PHY-BB/RF/MAC check module bit --> FPHY +#define ODM_PHY_BBR BIT0 +#define ODM_PHY_BBW BIT1 +#define ODM_PHY_RFR BIT2 +#define ODM_PHY_RFW BIT3 +#define ODM_PHY_MACR BIT4 +#define ODM_PHY_MACW BIT5 +#define ODM_PHY_ALLR BIT6 +#define ODM_PHY_ALLW BIT7 +#define ODM_PHY_TXPWR BIT8 +#define ODM_PHY_PWRDIFF BIT9 +#define ODM_PHY_SICR BIT10 +#define ODM_PHY_SICW BIT11 + + + + +extern u4Byte ODM_GlobalDebugLevel; + + +#if DBG +extern u8Byte ODM_GlobalDebugComponents; +#endif +#endif +#if 0 + +//----------------------------------------------------------------------------- +// Define the debug levels +// +// 1. DBG_TRACE and DBG_LOUD are used for normal cases. +// So that, they can help SW engineer to develope or trace states changed +// and also help HW enginner to trace every operation to and from HW, +// e.g IO, Tx, Rx. +// +// 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases, +// which help us to debug SW or HW. +// +//----------------------------------------------------------------------------- +// +// Never used in a call to ODM_RT_TRACE(pDM_Odm,)! +// +#define DBG_OFF 0 + +// +// Deprecated! Don't use it! +// TODO: fix related debug message! +// +//#define DBG_SEC 1 + +// +// Fatal bug. +// For example, Tx/Rx/IO locked up, OS hangs, memory access violation, +// resource allocation failed, unexpected HW behavior, HW BUG and so on. +// +#define DBG_SERIOUS 2 + +// +// Abnormal, rare, or unexpeted cases. +// For example, IRP/Packet/OID canceled, device suprisely unremoved and so on. +// +#define DBG_WARNING 3 + +// +// Normal case with useful information about current SW or HW state. +// For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status, +// SW protocol state change, dynamic mechanism state change and so on. +// +#define DBG_LOUD 4 + +// +// Normal case with detail execution flow or information. +// +#define DBG_TRACE 5 + + + +//----------------------------------------------------------------------------- +// Define the tracing components +// +//----------------------------------------------------------------------------- +#define COMP_TRACE BIT0 // For function call tracing. +#define COMP_DBG BIT1 // Only for temporary debug message. +#define COMP_INIT BIT2 // during driver initialization / halt / reset. +#define COMP_OID_QUERY BIT3 // Query OID. +#define COMP_OID_SET BIT4 // Set OID. +#define COMP_RECV BIT5 // Reveive part data path. +#define COMP_SEND BIT6 // Send part path. +#define COMP_IO BIT7 // I/O Related. Added by Annie, 2006-03-02. +#define COMP_POWER BIT8 // 802.11 Power Save mode or System/Device Power state related. +#define COMP_MLME BIT9 // 802.11 link related: join/start BSS, leave BSS. +#define COMP_SCAN BIT10 // For site survey. +#define COMP_SYSTEM BIT11 // For general platform function. +#define COMP_SEC BIT12 // For Security. +#define COMP_AP BIT13 // For AP mode related. +#define COMP_TURBO BIT14 // For Turbo Mode related. By Annie, 2005-10-21. +#define COMP_QOS BIT15 // For QoS. +#define COMP_AUTHENTICATOR BIT16 // For AP mode Authenticator. Added by Annie, 2006-01-30. +#define COMP_BEACON BIT17 // For Beacon related, by rcnjko. +#define COMP_ANTENNA BIT18 // For Antenna diversity related, by rcnjko. +#define COMP_RATE BIT19 // For Rate Adaptive mechanism, 2006.07.02, by rcnjko. #define COMP_EVENTS 0x00000080 // Event handling +#define COMP_EVENTS BIT20 // Event handling +#define COMP_FPGA BIT21 // For FPGA verfication +#define COMP_RM BIT22 // For Radio Measurement. +#define COMP_MP BIT23 // For mass production test, by shien chang, 2006.07.13 +#define COMP_RXDESC BIT24 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15. +#define COMP_CKIP BIT25 // For CCX 1 S13: CKIP. Added by Annie, 2006-08-14. +#define COMP_DIG BIT26 // For DIG, 2006.09.25, by rcnjko. +#define COMP_TXAGC BIT27 // For Tx power, 060928, by rcnjko. +#define COMP_HIPWR BIT28 // For High Power Mechanism, 060928, by rcnjko. +#define COMP_HALDM BIT29 // For HW Dynamic Mechanism, 061010, by rcnjko. +#define COMP_RSNA BIT30 // For RSNA IBSS , 061201, by CCW. +#define COMP_INDIC BIT31 // For link indication +#define COMP_LED BIT32 // For LED. +#define COMP_RF BIT33 // For RF. +//1!!!!!!!!!!!!!!!!!!!!!!!!!!! +//1//1Attention Please!!!<11n or 8190 specific code should be put below this line> +//1!!!!!!!!!!!!!!!!!!!!!!!!!!! + +#define COMP_HT BIT34 // For 802.11n HT related information. by Emily 2006-8-11 +#define COMP_POWER_TRACKING BIT35 //FOR 8190 TX POWER TRACKING +#define COMP_RX_REORDER BIT36 // 8190 Rx Reorder +#define COMP_AMSDU BIT37 // For A-MSDU Debugging +#define COMP_WPS BIT38 //WPS Debug Message +#define COMP_RATR BIT39 +#define COMP_RESET BIT40 +// For debug command to print on dbgview!! +#define COMP_CMD BIT41 +#define COMP_EFUSE BIT42 +#define COMP_MESH_INTERWORKING BIT43 +#define COMP_CCX BIT44 //CCX Debug Flag +#define COMP_IOCTL BIT45 // IO Control +#define COMP_GP BIT46 // For generic parser. +#define COMP_TXAGG BIT47 +#define COMP_HVL BIT48 // For Ndis 6.2 Context Swirch and Hardware Virtualiztion Layer +#define COMP_TEST BIT49 +#define COMP_BB_POWERSAVING BIT50 +#define COMP_SWAS BIT51 // For SW Antenna Switch +#define COMP_P2P BIT52 +#define COMP_MUX BIT53 +#define COMP_FUNC BIT54 +#define COMP_TDLS BIT55 +#define COMP_OMNIPEEK BIT56 +#define COMP_DUALMACSWITCH BIT60 // 2010/12/27 Add for Dual mac mode debug +#define COMP_EASY_CONCURRENT BIT61 // 2010/12/27 Add for easy cncurrent mode debug +#define COMP_PSD BIT63 //2011/3/9 Add for WLAN PSD for BT AFH + +#define COMP_DFS BIT62 + +#define COMP_ALL UINT64_C(0xFFFFFFFFFFFFFFFF) // All components +// For debug print flag to use +/*------------------------------Define structure----------------------------*/ +/* 2007/07/13 MH *//*------For DeBuG Print modeue------*/ + +/* Defnie structure to store different debug flag variable. Every debug flag + is a UINT32 integer and you can assign 32 different events. */ +typedef struct tag_DBGP_Debug_Flag_Structure +{ + u4Byte Mans; /* Main Scheduler module. */ + u4Byte Rtos; /* RTOS module. */ + u4Byte Alarm; /* Alarm module. */ + u4Byte Pm; /* Performance monitor module. */ +}DBGP_FLAG_T; + +/* Define debug print header for every service module.*/ +typedef struct tag_DBGP_Service_Module_Header_Name_Structure +{ + const char *pMANS; + const char *pRTOS; + const char *pALM; + const char *pPEM; + const char *pCMPK; + const char *pRAPD; + const char *pTXPB; + const char *pQUMG; +}DBGP_HEAD_T; + + +/* Define different debug flag for dedicated service modules in debug flag array. */ +// Each module has independt 32 bit debug flag you cnn define the flag as yout require. +typedef enum tag_DBGP_Flag_Type_Definition +{ + FQoS = 0, + FTX = 1, + FRX = 2, + FSEC = 3, + FMGNT = 4, + FMLME = 5, + FRESOURCE = 6, + FBEACON = 7, + FISR = 8, + FPHY = 9, + FMP = 10, + FEEPROM = 11, + FPWR = 12, + FDM = 13, + FDBG_CTRL = 14, + FC2H = 15, + FBT = 16, + FINIT = 17, + FIOCTL = 18, + FSHORT_CUT = 19, + DBGP_TYPE_MAX +}DBGP_FLAG_E; + + +// Define Qos Relative debug flag bit --> FQoS +#define QoS_INIT BIT0 +#define QoS_VISTA BIT1 + +// Define TX relative debug bit --> FTX +#define TX_DESC BIT0 +#define TX_DESC_TID BIT1 +#define TX_PATH BIT2 + +// Define RX relative debug bit --> FRX +#define RX_DATA BIT0 +#define RX_PHY_STS BIT1 +#define RX_PHY_SS BIT2 +#define RX_PHY_SQ BIT3 +#define RX_PHY_ASTS BIT4 +#define RX_ERR_LEN BIT5 +#define RX_DEFRAG BIT6 +#define RX_ERR_RATE BIT7 +#define RX_PATH BIT8 +#define RX_BEACON BIT9 + +// Define Security relative debug bit --> FSEC + +// Define MGNT relative debug bit --> FMGNT + +// Define MLME relative debug bit --> FMLME +#define MEDIA_STS BIT0 +#define LINK_STS BIT1 + +// Define OS resource check module bit --> FRESOURCE +#define OS_CHK BIT0 + +// Define beacon content check module bit --> FBEACON +#define BCN_SHOW BIT0 +#define BCN_PEER BIT1 + +// Define ISR/IMR check module bit --> FISR +#define ISR_CHK BIT0 + +// Define PHY-BB/RF/MAC check module bit --> FPHY +#define PHY_BBR BIT0 +#define PHY_BBW BIT1 +#define PHY_RFR BIT2 +#define PHY_RFW BIT3 +#define PHY_MACR BIT4 +#define PHY_MACW BIT5 +#define PHY_ALLR BIT6 +#define PHY_ALLW BIT7 +#define PHY_TXPWR BIT8 +#define PHY_PWRDIFF BIT9 +#define PHY_SICR BIT10 +#define PHY_SICW BIT11 + +// Define MPT driver check module bit --> FMP +#define MP_RX BIT0 +#define MP_SWICH_CH BIT1 + +// Define EEPROM and EFUSE check module bit --> FEEPROM +#define EEPROM_W BIT0 +#define EFUSE_PG BIT1 +#define EFUSE_READ_ALL BIT2 +#define EFUSE_ANALYSIS BIT3 +#define EFUSE_PG_DETAIL BIT4 + +// Define power save check module bit --> FPWR +#define LPS BIT0 +#define IPS BIT1 +#define PWRSW BIT2 +#define PWRHW BIT3 +#define PWRHAL BIT4 + +// Define Dynamic Mechanism check module bit --> FDM +#define WA_IOT BIT0 +#define DM_PWDB BIT1 +#define DM_Monitor BIT2 +#define DM_DIG BIT3 +#define DM_EDCA_Turbo BIT4 +#define DM_BT30 BIT5 + +// Define Dbg Control module bit --> FDBG_CTRL +#define DBG_CTRL_TRACE BIT0 +#define DBG_CTRL_INBAND_NOISE BIT1 + +// Define FW C2H Cmd check module bit --> FC2H +#define C2H_Summary BIT0 +#define C2H_PacketData BIT1 +#define C2H_ContentData BIT2 +// Define BT Cmd check module bit --> FBT +#define BT_TRACE BIT0 +#define BT_RFPoll BIT1 + +// Define init check for module bit --> FINIT +#define INIT_EEPROM BIT0 +#define INIT_TxPower BIT1 +#define INIT_IQK BIT2 +#define INIT_RF BIT3 + +// Define IOCTL Cmd check module bit --> FIOCTL +// section 1 : IRP related +#define IOCTL_IRP BIT0 +#define IOCTL_IRP_DETAIL BIT1 +#define IOCTL_IRP_STATISTICS BIT2 +#define IOCTL_IRP_HANDLE BIT3 +// section 2 : HCI command/event +#define IOCTL_BT_HCICMD BIT8 +#define IOCTL_BT_HCICMD_DETAIL BIT9 +#define IOCTL_BT_HCICMD_EXT BIT10 +#define IOCTL_BT_EVENT BIT11 +#define IOCTL_BT_EVENT_DETAIL BIT12 +#define IOCTL_BT_EVENT_PERIODICAL BIT13 +// section 3 : BT tx/rx data and throughput +#define IOCTL_BT_TX_ACLDATA BIT16 +#define IOCTL_BT_TX_ACLDATA_DETAIL BIT17 +#define IOCTL_BT_RX_ACLDATA BIT18 +#define IOCTL_BT_RX_ACLDATA_DETAIL BIT19 +#define IOCTL_BT_TP BIT20 +// section 4 : BT connection state machine. +#define IOCTL_STATE BIT21 +#define IOCTL_BT_LOGO BIT22 +// section 5 : BT function trace +#define IOCTL_CALLBACK_FUN BIT24 +#define IOCTL_PARSE_BT_PKT BIT25 +#define IOCTL_BT_TX_PKT BIT26 +#define IOCTL_BT_FLAG_MON BIT27 + +// +// Define init check for module bit --> FSHORT_CUT +// 2011/07/20 MH Add for short but definition. +// +#define SHCUT_TX BIT0 +#define SHCUT_RX BIT1 + + +/* 2007/07/13 MH *//*------For DeBuG Print modeue------*/ +/*------------------------------Define structure----------------------------*/ + + +/*------------------------Export Marco Definition---------------------------*/ +#if (DM_ODM_SUPPORT_TYPE != ODM_MP) +#define RT_PRINTK(fmt, args...) printk( "%s(): " fmt, __FUNCTION__, ## args); + +#if DBG +#define ODM_RT_TRACE(pDM_Odm,comp, level, fmt) \ + if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \ + { \ + RT_PRINTK fmt; \ + } + +#define RT_TRACE_F(comp, level, fmt) \ + if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \ + { \ + RT_PRINTK fmt; \ + } + +#define RT_ASSERT(expr,fmt) \ + if(!(expr)) { \ + printk( "Assertion failed! %s at ......\n", #expr); \ + printk( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \ + } +#define dbg_enter() { printk("==> %s\n", __FUNCTION__); } +#define dbg_exit() { printk("<== %s\n", __FUNCTION__); } +#define dbg_trace(str) { printk("%s:%s\n", __FUNCTION__, str); } +#else +#define ODM_RT_TRACE(pDM_Odm,comp, level, fmt) +#define RT_TRACE_F(comp, level, fmt) +#define RT_ASSERT(expr, fmt) +#define dbg_enter() +#define dbg_exit() +#define dbg_trace(str) +#endif + +#if DBG +#define DbgPrint printk + +#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \ + { \ + char *szTitle = _TitleString; \ + pu1Byte pbtHexData = _HexData; \ + u4Byte u4bHexDataLen = _HexDataLen; \ + u4Byte __i; \ + DbgPrint("%s", szTitle); \ + for (__i=0;__i<u4bHexDataLen;__i++) \ + { \ + if ((__i & 15) == 0) \ + { \ + DbgPrint("\n"); \ + } \ + DbgPrint("%02X%s", pbtHexData[__i], ( ((__i&3)==3) ? " " : " ") ); \ + } \ + DbgPrint("\n"); \ + } + +// RT_PRINT_XXX macros: implemented for debugging purpose. +// Added by Annie, 2005-11-21. +#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) \ + if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \ + { \ + int __i; \ + pu1Byte ptr = (pu1Byte)_HexData; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + for( __i=0; __i<(int)_HexDataLen; __i++ ) \ + { \ + DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" "); \ + if (((__i + 1) % 16) == 0) DbgPrint("\n"); \ + } \ + DbgPrint("\n"); \ + } + +#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) \ + if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \ + { \ + int __i; \ + pu1Byte ptr = (pu1Byte)_Ptr; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + DbgPrint(" "); \ + for( __i=0; __i<6; __i++ ) \ + DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \ + DbgPrint("\n"); \ + } + +#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) \ + if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \ + { \ + int __i, __j; \ + pu1Byte ptr = (pu1Byte)_Ptr; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + DbgPrint("\n"); \ + for( __i=0; __i<(int)_AddNum; __i++ ) \ + { \ + for( __j=0; __j<6; __j++ ) \ + DbgPrint("%02X%s", ptr[__i*6+__j], (__j==5)?"":"-"); \ + DbgPrint("\n"); \ + } \ + } + +// Added by Annie, 2005-11-22. +#define MAX_STR_LEN 64 +#define PRINTABLE(_ch) (_ch>=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22. + +#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \ + if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \ + { \ + int __i; \ + u1Byte buffer[MAX_STR_LEN]; \ + int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \ + PlatformZeroMemory( buffer, MAX_STR_LEN ); \ + PlatformMoveMemory( buffer, (pu1Byte)_Ptr, length ); \ + for( __i=0; __i<MAX_STR_LEN; __i++ ) \ + { \ + if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \ + } \ + buffer[length] = '\0'; \ + DbgPrint("Rtl819x: "); \ + DbgPrint(_TitleString); \ + DbgPrint(": %d, <%s>\n", _Len, buffer); \ + } + +#else // of #if DBG +#define DbgPrint(...) +#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) +#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) +#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) +#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) +#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) +#endif // of #if DBG + + + +#endif // #if (DM_ODM_SUPPORT_TYPE != ODM_MP) + +#define DEBUG_PRINT 1 + +// Please add new OS's print API by yourself + +//#if (RT_PLATFORM==PLATFORM_WINDOWS) +#if (DEBUG_PRINT == 1) && DBG +#define RTPRINT(dbgtype, dbgflag, printstr)\ +{\ + if (DBGP_Type[dbgtype] & dbgflag)\ + {\ + DbgPrint printstr;\ + }\ +} + +#define RTPRINT_ADDR(dbgtype, dbgflag, printstr, _Ptr)\ +{\ + if (DBGP_Type[dbgtype] & dbgflag)\ + {\ + int __i; \ + pu1Byte ptr = (pu1Byte)_Ptr; \ + DbgPrint printstr; \ + DbgPrint(" "); \ + for( __i=0; __i<6; __i++ ) \ + DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \ + DbgPrint("\n"); \ + }\ +} + +#define RTPRINT_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)\ +{\ + if (DBGP_Type[dbgtype] & dbgflag)\ + {\ + int __i; \ + pu1Byte ptr = (pu1Byte)_HexData; \ + DbgPrint(_TitleString); \ + for( __i=0; __i<(int)_HexDataLen; __i++ ) \ + { \ + DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" ");\ + if (((__i + 1) % 16) == 0) DbgPrint("\n");\ + } \ + DbgPrint("\n"); \ + }\ +} +#define FuncEntry FunctionIn(COMP_FUNC) +#define FuncExit FunctionOut(COMP_FUNC) + +#define FunctionIn(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("==========> %s\n", __FUNCTION__)) +#define FunctionOut(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("<========== %s\n", __FUNCTION__)) + + +#else + +#define DBGP(dbgtype, dbgflag, printstr) +#define RTPRINT(dbgtype, dbgflag, printstr) +#define RTPRINT_ADDR(dbgtype, dbgflag, printstr, _Ptr) +#define RTPRINT_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen) +#define FuncEntry +#define FuncExit +#define FunctionIn(_comp) +#define FunctionOut(_comp) +#endif +/*------------------------Export Marco Definition---------------------------*/ + + +/*------------------------Export global variable----------------------------*/ +extern u4Byte DBGP_Type[DBGP_TYPE_MAX]; +extern DBGP_HEAD_T DBGP_Head; + +/*------------------------Export global variable----------------------------*/ + + +/*--------------------------Exported Function prototype---------------------*/ +extern void DBGP_Flag_Init(void); +extern void DBG_PrintAllFlag(void); +extern void DBG_PrintAllComp(void); +extern void DBG_PrintFlagEvent(u1Byte DbgFlag); +extern void DBG_DumpMem(const u1Byte DbgComp, + const u1Byte DbgLevel, + pu1Byte pMem, + u2Byte Len); + +/*--------------------------Exported Function prototype---------------------*/ + + + + + + + + + +extern u4Byte GlobalDebugLevel; +extern u8Byte GlobalDebugComponents; + + +#endif + + +#endif // __ODM_DBG_H__ + |