diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8723as/hal/rtl8723a/rtl8723a_dm.c')
| -rwxr-xr-x | drivers/net/wireless/rtlwifi/rtl8723as/hal/rtl8723a/rtl8723a_dm.c | 597 |
1 files changed, 597 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8723as/hal/rtl8723a/rtl8723a_dm.c b/drivers/net/wireless/rtlwifi/rtl8723as/hal/rtl8723a/rtl8723a_dm.c new file mode 100755 index 000000000000..84062c161655 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8723as/hal/rtl8723a/rtl8723a_dm.c @@ -0,0 +1,597 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +//============================================================ +// Description: +// +// This file is for 92CE/92CU dynamic mechanism only +// +// +//============================================================ +#define _RTL8723A_DM_C_ + +//============================================================ +// include files +//============================================================ +#include <drv_conf.h> +#include <osdep_service.h> +#include <drv_types.h> +#include <rtw_byteorder.h> + +#include <rtl8723a_hal.h> + +//============================================================ +// Global var +//============================================================ + + +static VOID +dm_CheckProtection( + IN PADAPTER Adapter + ) +{ +#if 0 + PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); + u1Byte CurRate, RateThreshold; + + if(pMgntInfo->pHTInfo->bCurBW40MHz) + RateThreshold = MGN_MCS1; + else + RateThreshold = MGN_MCS3; + + if(Adapter->TxStats.CurrentInitTxRate <= RateThreshold) + { + pMgntInfo->bDmDisableProtect = TRUE; + DbgPrint("Forced disable protect: %x\n", Adapter->TxStats.CurrentInitTxRate); + } + else + { + pMgntInfo->bDmDisableProtect = FALSE; + DbgPrint("Enable protect: %x\n", Adapter->TxStats.CurrentInitTxRate); + } +#endif +} + +static VOID +dm_CheckStatistics( + IN PADAPTER Adapter + ) +{ +#if 0 + if(!Adapter->MgntInfo.bMediaConnect) + return; + + //2008.12.10 tynli Add for getting Current_Tx_Rate_Reg flexibly. + rtw_hal_get_hwreg( Adapter, HW_VAR_INIT_TX_RATE, (pu1Byte)(&Adapter->TxStats.CurrentInitTxRate) ); + + // Calculate current Tx Rate(Successful transmited!!) + + // Calculate current Rx Rate(Successful received!!) + + //for tx tx retry count + rtw_hal_get_hwreg( Adapter, HW_VAR_RETRY_COUNT, (pu1Byte)(&Adapter->TxStats.NumTxRetryCount) ); +#endif +} + +static void dm_CheckPbcGPIO(_adapter *padapter) +{ + u8 tmp1byte; + u8 bPbcPressed = _FALSE; + + if(!padapter->registrypriv.hw_wps_pbc) + return; + +#ifdef CONFIG_USB_HCI + tmp1byte = rtw_read8(padapter, GPIO_IO_SEL); + tmp1byte |= (HAL_8192C_HW_GPIO_WPS_BIT); + rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as output mode + + tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT); + rtw_write8(padapter, GPIO_IN, tmp1byte); //reset the floating voltage level + + tmp1byte = rtw_read8(padapter, GPIO_IO_SEL); + tmp1byte &= ~(HAL_8192C_HW_GPIO_WPS_BIT); + rtw_write8(padapter, GPIO_IO_SEL, tmp1byte); //enable GPIO[2] as input mode + + tmp1byte =rtw_read8(padapter, GPIO_IN); + + if (tmp1byte == 0xff) + return ; + + if (tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT) + { + bPbcPressed = _TRUE; + } +#else + tmp1byte = rtw_read8(padapter, GPIO_IN); + //RT_TRACE(COMP_IO, DBG_TRACE, ("dm_CheckPbcGPIO - %x\n", tmp1byte)); + + if (tmp1byte == 0xff || padapter->init_adpt_in_progress) + return ; + + if((tmp1byte&HAL_8192C_HW_GPIO_WPS_BIT)==0) + { + bPbcPressed = _TRUE; + } +#endif + + if( _TRUE == bPbcPressed) + { + // Here we only set bPbcPressed to true + // After trigger PBC, the variable will be set to false + DBG_8192C("CheckPbcGPIO - PBC is pressed\n"); + +#ifdef RTK_DMP_PLATFORM +#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,12)) + kobject_uevent(&padapter->pnetdev->dev.kobj, KOBJ_NET_PBC); +#else + kobject_hotplug(&padapter->pnetdev->class_dev.kobj, KOBJ_NET_PBC); +#endif +#else + + if ( padapter->pid[0] == 0 ) + { // 0 is the default value and it means the application monitors the HW PBC doesn't privde its pid to driver. + return; + } + +#ifdef PLATFORM_LINUX + rtw_signal_process(padapter->pid[0], SIGUSR1); +#endif +#endif + } +} + +#ifdef CONFIG_PCI_HCI +// +// Description: +// Perform interrupt migration dynamically to reduce CPU utilization. +// +// Assumption: +// 1. Do not enable migration under WIFI test. +// +// Created by Roger, 2010.03.05. +// +VOID +dm_InterruptMigration( + IN PADAPTER Adapter + ) +{ + HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); + struct mlme_priv *pmlmepriv = &(Adapter->mlmepriv); + BOOLEAN bCurrentIntMt, bCurrentACIntDisable; + BOOLEAN IntMtToSet = _FALSE; + BOOLEAN ACIntToSet = _FALSE; + + + // Retrieve current interrupt migration and Tx four ACs IMR settings first. + bCurrentIntMt = pHalData->bInterruptMigration; + bCurrentACIntDisable = pHalData->bDisableTxInt; + + // + // <Roger_Notes> Currently we use busy traffic for reference instead of RxIntOK counts to prevent non-linear Rx statistics + // when interrupt migration is set before. 2010.03.05. + // + if(!Adapter->registrypriv.wifi_spec && + (check_fwstate(pmlmepriv, _FW_LINKED)== _TRUE) && + pmlmepriv->LinkDetectInfo.bHigherBusyTraffic) + { + IntMtToSet = _TRUE; + + // To check whether we should disable Tx interrupt or not. + if(pmlmepriv->LinkDetectInfo.bHigherBusyRxTraffic ) + ACIntToSet = _TRUE; + } + + //Update current settings. + if( bCurrentIntMt != IntMtToSet ){ + DBG_8192C("%s(): Update interrrupt migration(%d)\n",__FUNCTION__,IntMtToSet); + if(IntMtToSet) + { + // + // <Roger_Notes> Set interrrupt migration timer and corresponging Tx/Rx counter. + // timer 25ns*0xfa0=100us for 0xf packets. + // 2010.03.05. + // + rtw_write32(Adapter, REG_INT_MIG, 0xff000fa0);// 0x306:Rx, 0x307:Tx + pHalData->bInterruptMigration = IntMtToSet; + } + else + { + // Reset all interrupt migration settings. + rtw_write32(Adapter, REG_INT_MIG, 0); + pHalData->bInterruptMigration = IntMtToSet; + } + } + + /*if( bCurrentACIntDisable != ACIntToSet ){ + DBG_8192C("%s(): Update AC interrrupt(%d)\n",__FUNCTION__,ACIntToSet); + if(ACIntToSet) // Disable four ACs interrupts. + { + // + // <Roger_Notes> Disable VO, VI, BE and BK four AC interrupts to gain more efficient CPU utilization. + // When extremely highly Rx OK occurs, we will disable Tx interrupts. + // 2010.03.05. + // + UpdateInterruptMask8192CE( Adapter, 0, RT_AC_INT_MASKS ); + pHalData->bDisableTxInt = ACIntToSet; + } + else// Enable four ACs interrupts. + { + UpdateInterruptMask8192CE( Adapter, RT_AC_INT_MASKS, 0 ); + pHalData->bDisableTxInt = ACIntToSet; + } + }*/ + +} + +#endif + +// +// Initialize GPIO setting registers +// +static void +dm_InitGPIOSetting( + IN PADAPTER Adapter + ) +{ + PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); + + u8 tmp1byte; + + tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG); + tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT); + + rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte); +} +//============================================================ +// functions +//============================================================ +static void Init_ODM_ComInfo_8723a(PADAPTER Adapter) +{ + + PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); + PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); + u8 cut_ver,fab_ver; + + // + // Init Value + // + _rtw_memset(pDM_Odm,0,sizeof(pDM_Odm)); + + pDM_Odm->Adapter = Adapter; + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PLATFORM,ODM_CE); + if(Adapter->interface_type == RTW_GSPI ) + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,ODM_ITRF_SDIO); + else + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_INTERFACE,Adapter->interface_type);//RTL871X_HCI_TYPE + + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_IC_TYPE,ODM_RTL8723A); + + + if(IS_8723A_A_CUT(pHalData->VersionID)) + { + fab_ver = ODM_UMC; + cut_ver = ODM_CUT_A; + } + else if(IS_8723A_B_CUT(pHalData->VersionID)) + { + fab_ver = ODM_UMC; + cut_ver = ODM_CUT_B; + } + else + { + fab_ver = ODM_TSMC; + cut_ver = ODM_CUT_A; + } + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_FAB_VER,fab_ver); + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_CUT_VER,cut_ver); + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_MP_TEST_CHIP,IS_NORMAL_CHIP(pHalData->VersionID)); + +#ifdef CONFIG_USB_HCI + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_BOARD_TYPE,pHalData->BoardType); + + if(pHalData->BoardType == BOARD_USB_High_PA){ + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_EXT_LNA,_TRUE); + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_EXT_PA,_TRUE); + } +#endif + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_PATCH_ID,pHalData->CustomerID); + // ODM_CMNINFO_BINHCT_TEST only for MP Team + ODM_CmnInfoInit(pDM_Odm,ODM_CMNINFO_BWIFI_TEST,Adapter->registrypriv.wifi_spec); + + + if(pHalData->rf_type == RF_1T1R){ + ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T1R); + } + else if(pHalData->rf_type == RF_2T2R){ + ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_2T2R); + } + else if(pHalData->rf_type == RF_1T2R){ + ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_RF_TYPE,ODM_1T2R); + } +} +static void Update_ODM_ComInfo_8723a(PADAPTER Adapter) +{ + struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; + struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; + struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter); + PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); + PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + int i; + + pdmpriv->InitODMFlag = 0 + | ODM_BB_DIG +#ifdef CONFIG_ODM_REFRESH_RAMASK + | ODM_BB_RA_MASK +#endif + | ODM_BB_DYNAMIC_TXPWR + | ODM_BB_FA_CNT + | ODM_BB_RSSI_MONITOR + | ODM_BB_CCK_PD + | ODM_BB_PWR_SAVE + | ODM_MAC_EDCA_TURBO + | ODM_RF_TX_PWR_TRACK + | ODM_RF_CALIBRATION +#ifdef CONFIG_ODM_ADAPTIVITY + | ODM_BB_ADAPTIVITY +#endif + ; + +#ifdef CONFIG_ANTENNA_DIVERSITY + if(pHalData->AntDivCfg) + pdmpriv->InitODMFlag |= ODM_BB_ANT_DIV; +#endif + +#if (MP_DRIVER==1) + if (Adapter->registrypriv.mp_mode == 1) { + pdmpriv->InitODMFlag = 0 + | ODM_RF_CALIBRATION + | ODM_RF_TX_PWR_TRACK + ; + } +#endif//(MP_DRIVER==1) + +#ifdef CONFIG_DISABLE_ODM + pdmpriv->InitODMFlag = 0; +#endif//CONFIG_DISABLE_ODM + + // + // Pointer reference + // + //ODM_CMNINFO_MAC_PHY_MODE pHalData->MacPhyMode92D + // ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_MAC_PHY_MODE,&(pDM_Odm->u1Byte_temp)); + + ODM_CmnInfoUpdate(pDM_Odm,ODM_CMNINFO_ABILITY,pdmpriv->InitODMFlag); + + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_TX_UNI,&(Adapter->xmitpriv.tx_bytes)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_RX_UNI,&(Adapter->recvpriv.rx_bytes)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_WM_MODE,&(pmlmeext->cur_wireless_mode)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_CHNL_OFFSET,&(pHalData->nCur40MhzPrimeSC)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SEC_MODE,&(Adapter->securitypriv.dot11PrivacyAlgrthm)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BW,&(pHalData->CurrentChannelBW )); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_CHNL,&( pHalData->CurrentChannel)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_NET_CLOSED,&( Adapter->net_closed)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_MP_MODE,&(Adapter->registrypriv.mp_mode)); + + //================= only for 8192D ================= + /* + //pHalData->CurrentBandType92D + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BAND,&(pDM_Odm->u1Byte_temp)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_GET_VALUE,&(pDM_Odm->u1Byte_temp)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BUDDY_ADAPTOR,&(pDM_Odm->PADAPTER_temp)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_DMSP_IS_MASTER,&(pDM_Odm->u1Byte_temp)); + //================= only for 8192D ================= + // driver havn't those variable now + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_OPERATION,&(pDM_Odm->u1Byte_temp)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_BT_DISABLE_EDCA,&(pDM_Odm->u1Byte_temp)); + */ + + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_SCAN,&(pmlmepriv->bScanInProcess)); + ODM_CmnInfoHook(pDM_Odm,ODM_CMNINFO_POWER_SAVING,&(pwrctrlpriv->bpower_saving)); + + + for(i=0; i< NUM_STA; i++) + { + //pDM_Odm->pODM_StaInfo[i] = NULL; + ODM_CmnInfoPtrArrayHook(pDM_Odm, ODM_CMNINFO_STA_STATUS,i,NULL); + } +} + +void +rtl8723a_InitHalDm( + IN PADAPTER Adapter + ) +{ + PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); + + u8 i; + + pdmpriv->DM_Type = DM_Type_ByDriver; + pdmpriv->DMFlag = DYNAMIC_FUNC_DISABLE; + +#ifdef CONFIG_BT_COEXIST + pdmpriv->DMFlag |= DYNAMIC_FUNC_BT; +// btdm_InitBtCoexistDM(Adapter); // Move to BT_CoexistMechanism() +#endif + pdmpriv->InitDMFlag = pdmpriv->DMFlag; + + Update_ODM_ComInfo_8723a(Adapter); + ODM_DMInit(pDM_Odm); + // Save REG_INIDATA_RATE_SEL value for TXDESC. + for(i = 0 ; i<32 ; i++) + { + pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL+i) & 0x3f; + } + +} + +VOID +rtl8723a_HalDmWatchDog( + IN PADAPTER Adapter + ) +{ + BOOLEAN bFwCurrentInPSMode = _FALSE; + BOOLEAN bFwPSAwake = _TRUE; + u8 hw_init_completed = _FALSE; + PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; +#ifdef CONFIG_CONCURRENT_MODE + PADAPTER pbuddy_adapter = Adapter->pbuddy_adapter; +#endif //CONFIG_CONCURRENT_MODE + + hw_init_completed = Adapter->hw_init_completed; + +#if (MP_DRIVER == 1) +if (Adapter->registrypriv.mp_mode == 1 && Adapter->mppriv.mp_dm ==0) + return; +#endif + + if (hw_init_completed == _FALSE) + goto skip_dm; + +#ifdef CONFIG_LPS + bFwCurrentInPSMode = adapter_to_pwrctl(Adapter)->bFwCurrentInPSMode; + rtw_hal_get_hwreg(Adapter, HW_VAR_FWLPS_RF_ON, (u8 *)(&bFwPSAwake)); +#endif + +#ifdef CONFIG_P2P_PS + // Fw is under p2p powersaving mode, driver should stop dynamic mechanism. + // modifed by thomas. 2011.06.11. + if(Adapter->wdinfo.p2p_ps_mode) + bFwPSAwake = _FALSE; +#endif //CONFIG_P2P_PS + + if( (hw_init_completed == _TRUE) + && ((!bFwCurrentInPSMode) && bFwPSAwake)) + { + // + // Calculate Tx/Rx statistics. + // + dm_CheckStatistics(Adapter); + + +#ifdef CONFIG_CONCURRENT_MODE + if(Adapter->adapter_type > PRIMARY_ADAPTER) + goto _record_initrate; +#endif + + // + // Dynamically switch RTS/CTS protection. + // + //dm_CheckProtection(Adapter); + +#ifdef CONFIG_PCI_HCI + // 20100630 Joseph: Disable Interrupt Migration mechanism temporarily because it degrades Rx throughput. + // Tx Migration settings. + //dm_InterruptMigration(Adapter); + + //if(Adapter->HalFunc.TxCheckStuckHandler(Adapter)) + // PlatformScheduleWorkItem(&(GET_HAL_DATA(Adapter)->HalResetWorkItem)); +#endif +_record_initrate: + + // Read REG_INIDATA_RATE_SEL value for TXDESC. + if(check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE) == _TRUE) + { + pdmpriv->INIDATA_RATE[0] = rtw_read8(Adapter, REG_INIDATA_RATE_SEL) & 0x3f; + } + else + { + u8 i; + for(i=1 ; i < (Adapter->stapriv.asoc_sta_count + 1); i++) + { + pdmpriv->INIDATA_RATE[i] = rtw_read8(Adapter, (REG_INIDATA_RATE_SEL+i)) & 0x3f; + } + } + } + + + //ODM + if (hw_init_completed == _TRUE) + { + u8 bLinked=_FALSE; + u8 bsta_state=_FALSE; + + #ifdef CONFIG_DISABLE_ODM + pHalData->odmpriv.SupportAbility = 0; + #endif + + if(rtw_linked_check(Adapter)) + bLinked = _TRUE; + +#ifdef CONFIG_CONCURRENT_MODE + if(pbuddy_adapter && rtw_linked_check(pbuddy_adapter)) + bLinked = _TRUE; +#endif //CONFIG_CONCURRENT_MODE + + ODM_CmnInfoUpdate(&pHalData->odmpriv ,ODM_CMNINFO_LINK, bLinked); + + if (check_fwstate(&Adapter->mlmepriv, WIFI_STATION_STATE)) + bsta_state = _TRUE; +#ifdef CONFIG_CONCURRENT_MODE + if(pbuddy_adapter && check_fwstate(&pbuddy_adapter->mlmepriv, WIFI_STATION_STATE)) + bsta_state = _TRUE; +#endif //CONFIG_CONCURRENT_MODE + ODM_CmnInfoUpdate(&pHalData->odmpriv ,ODM_CMNINFO_STATION_STATE, bsta_state); + + + ODM_DMWatchdog(&pHalData->odmpriv); + + } + +skip_dm: + + // Check GPIO to determine current RF on/off and Pbc status. + // Check Hardware Radio ON/OFF or not +#ifdef CONFIG_PCI_HCI + if(pHalData->bGpioHwWpsPbc) +#endif + { + dm_CheckPbcGPIO(Adapter); // Add by hpfan 2008-03-11 + } + +} + +void rtl8723a_init_dm_priv(IN PADAPTER Adapter) +{ + PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + PDM_ODM_T podmpriv = &pHalData->odmpriv; + _rtw_memset(pdmpriv, 0, sizeof(struct dm_priv)); + Init_ODM_ComInfo_8723a(Adapter); +#ifdef CONFIG_SW_ANTENNA_DIVERSITY + //_init_timer(&(pdmpriv->SwAntennaSwitchTimer), Adapter->pnetdev , odm_SW_AntennaSwitchCallback, Adapter); + ODM_InitAllTimers(podmpriv ); +#endif +} + +void rtl8723a_deinit_dm_priv(IN PADAPTER Adapter) +{ + PHAL_DATA_TYPE pHalData = GET_HAL_DATA(Adapter); + struct dm_priv *pdmpriv = &pHalData->dmpriv; + PDM_ODM_T podmpriv = &pHalData->odmpriv; +#ifdef CONFIG_SW_ANTENNA_DIVERSITY + //_cancel_timer_ex(&pdmpriv->SwAntennaSwitchTimer); + ODM_CancelAllTimers(podmpriv); +#endif +} + |