diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8192d_spec.h')
| -rwxr-xr-x | drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8192d_spec.h | 1761 |
1 files changed, 1761 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8192d_spec.h b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8192d_spec.h new file mode 100755 index 000000000000..74e11d5af653 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtl8192d_spec.h @@ -0,0 +1,1761 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ + +#ifndef __RTL8192D_SPEC_H__ +#define __RTL8192D_SPEC_H__ + +#include <drv_conf.h> + +//============================================================ +// 8192D Regsiter offset definition +//============================================================ + + +//============================================================ +// +//============================================================ + +//----------------------------------------------------- +// +// 0x0000h ~ 0x00FFh System Configuration +// +//----------------------------------------------------- +#define REG_SYS_ISO_CTRL 0x0000 +#define REG_SYS_FUNC_EN 0x0002 +#define REG_APS_FSMCO 0x0004 +#define REG_SYS_CLKR 0x0008 +#define REG_9346CR 0x000A +#define REG_EE_VPD 0x000C +#define REG_AFE_MISC 0x0010 +#define REG_SPS0_CTRL 0x0011 +#define REG_POWER_OFF_IN_PROCESS 0x0017 +#define REG_SPS_OCP_CFG 0x0018 +#define REG_RSV_CTRL 0x001C +#define REG_RF_CTRL 0x001F +#define REG_LDOA15_CTRL 0x0020 +#define REG_LDOV12D_CTRL 0x0021 +#define REG_LDOHCI12_CTRL 0x0022 +#define REG_LPLDO_CTRL 0x0023 +#define REG_AFE_XTAL_CTRL 0x0024 +#define REG_AFE_PLL_CTRL 0x0028 +#define REG_MAC_PHY_CTRL 0x002c //for 92d, DMDP,SMSP,DMSP contrl +#define REG_EFUSE_CTRL 0x0030 +#define REG_EFUSE_TEST 0x0034 +#define REG_PWR_DATA 0x0038 +#define REG_CAL_TIMER 0x003C +#define REG_ACLK_MON 0x003E +#define REG_GPIO_MUXCFG 0x0040 +//#define REG_GPIO_MUXCFG 0x0041 +#define REG_GPIO_IO_SEL 0x0042 +#define REG_MAC_PINMUX_CFG 0x0043 +#define REG_GPIO_PIN_CTRL 0x0044 +#define REG_GPIO_INTM 0x0048 +#define REG_LEDCFG0 0x004C +#define REG_LEDCFG1 0x004D +#define REG_LEDCFG2 0x004E +#define REG_LEDCFG3 0x004F +#define REG_FSIMR 0x0050 +#define REG_FSISR 0x0054 + +#define REG_MCUFWDL 0x0080 + +#define REG_HMEBOX_EXT_0 0x0088 +#define REG_HMEBOX_EXT_1 0x008A +#define REG_HMEBOX_EXT_2 0x008C +#define REG_HMEBOX_EXT_3 0x008E + +#define REG_BIST_SCAN 0x00D0 +#define REG_BIST_RPT 0x00D4 +#define REG_BIST_ROM_RPT 0x00D8 +#define REG_USB_SIE_INTF 0x00E0 +#define REG_PCIE_MIO_INTF 0x00E4 +#define REG_PCIE_MIO_INTD 0x00E8 +#define REG_HPON_FSM 0x00EC +#define REG_SYS_CFG 0x00F0 +#define REG_MAC_PHY_CTRL_NORMAL 0x00f8 + +#define REG_MAC0 0x0081 +#define REG_MAC1 0x0053 +#define FW_MAC0_ready 0x18 +#define FW_MAC1_ready 0x1A +#define MAC0_ON BIT7 +#define MAC1_ON BIT0 +#define mac0_ready BIT0 +#define mac1_ready BIT0 + + +//----------------------------------------------------- +// +// 0x0100h ~ 0x01FFh MACTOP General Configuration +// +//----------------------------------------------------- +#define REG_CR 0x0100 +#define REG_PBP 0x0104 +#define REG_TRXDMA_CTRL 0x010C +#define REG_TRXFF_BNDY 0x0114 +#define REG_TRXFF_STATUS 0x0118 +#define REG_RXFF_PTR 0x011C +#define REG_HIMR 0x0120 +#define REG_HISR 0x0124 +#define REG_HIMRE 0x0128 +#define REG_HISRE 0x012C +#define REG_CPWM 0x012F +#define REG_FWIMR 0x0130 +#define REG_FWISR 0x0134 +#define REG_FTIMR 0x0138 +#define REG_PKTBUF_DBG_CTRL 0x0140 +#define REG_PKTBUF_DBG_DATA_L 0x0144 +#define REG_PKTBUF_DBG_DATA_H 0x0148 + +#define REG_TC0_CTRL 0x0150 +#define REG_TC1_CTRL 0x0154 +#define REG_TC2_CTRL 0x0158 +#define REG_TC3_CTRL 0x015C +#define REG_TC4_CTRL 0x0160 +#define REG_TCUNIT_BASE 0x0164 +#define REG_MBIST_START 0x0174 +#define REG_MBIST_DONE 0x0178 +#define REG_MBIST_FAIL 0x017C +#define REG_C2HEVT_MSG_NORMAL 0x01A0 +#define REG_C2HEVT_CLEAR 0x01AF +#define REG_C2HEVT_MSG_TEST 0x01B8 +#define REG_MCUTST_1 0x01c0 +#define REG_FMETHR 0x01C8 +#define REG_HMETFR 0x01CC +#define REG_HMEBOX_0 0x01D0 +#define REG_HMEBOX_1 0x01D4 +#define REG_HMEBOX_2 0x01D8 +#define REG_HMEBOX_3 0x01DC + +#define REG_LLT_INIT 0x01E0 +#define REG_BB_ACCEESS_CTRL 0x01E8 +#define REG_BB_ACCESS_DATA 0x01EC + + +//----------------------------------------------------- +// +// 0x0200h ~ 0x027Fh TXDMA Configuration +// +//----------------------------------------------------- +#define REG_RQPN 0x0200 +#define REG_FIFOPAGE 0x0204 +#define REG_TDECTRL 0x0208 +#define REG_TXDMA_OFFSET_CHK 0x020C +#define REG_TXDMA_STATUS 0x0210 +#define REG_RQPN_NPQ 0x0214 + +//----------------------------------------------------- +// +// 0x0280h ~ 0x02FFh RXDMA Configuration +// +//----------------------------------------------------- +#define REG_RXDMA_AGG_PG_TH 0x0280 +#define REG_RXPKT_NUM 0x0284 +#define REG_RXDMA_STATUS 0x0288 + + +//----------------------------------------------------- +// +// 0x0300h ~ 0x03FFh PCIe +// +//----------------------------------------------------- +#define REG_PCIE_CTRL_REG 0x0300 +#define REG_INT_MIG 0x0304 // Interrupt Migration +#define REG_BCNQ_DESA 0x0308 // TX Beacon Descriptor Address +#define REG_HQ_DESA 0x0310 // TX High Queue Descriptor Address +#define REG_MGQ_DESA 0x0318 // TX Manage Queue Descriptor Address +#define REG_VOQ_DESA 0x0320 // TX VO Queue Descriptor Address +#define REG_VIQ_DESA 0x0328 // TX VI Queue Descriptor Address +#define REG_BEQ_DESA 0x0330 // TX BE Queue Descriptor Address +#define REG_BKQ_DESA 0x0338 // TX BK Queue Descriptor Address +#define REG_RX_DESA 0x0340 // RX Queue Descriptor Address +#define REG_DBI 0x0348 // Backdoor REG for Access Configuration +//sherry added for DBI Read/Write 20091126 +#define REG_DBI_WDATA 0x0348 // Backdoor REG for Access Configuration +#define REG_DBI_RDATA 0x034C //Backdoor REG for Access Configuration +#define REG_DBI_CTRL 0x0350 //Backdoor REG for Access Configuration +#define REG_DBI_FLAG 0x0352 //Backdoor REG for Access Configuration#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY +#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY +#define REG_DBG_SEL 0x0360 // Debug Selection Register +#define REG_PCIE_HRPWM 0x0361 //PCIe RPWM +#define REG_PCIE_HCPWM 0x0363 //PCIe CPWM +#define REG_UART_CTRL 0x0364 // UART Control +#define REG_UART_TX_DESA 0x0370 // UART TX Descriptor Address +#define REG_UART_RX_DESA 0x0378 // UART Rx Descriptor Address + + +// spec version 11 +//----------------------------------------------------- +// +// 0x0400h ~ 0x047Fh Protocol Configuration +// +//----------------------------------------------------- +#define REG_VOQ_INFORMATION 0x0400 +#define REG_VIQ_INFORMATION 0x0404 +#define REG_BEQ_INFORMATION 0x0408 +#define REG_BKQ_INFORMATION 0x040C +#define REG_MGQ_INFORMATION 0x0410 +#define REG_HGQ_INFORMATION 0x0414 +#define REG_BCNQ_INFORMATION 0x0418 + + +#define REG_CPU_MGQ_INFORMATION 0x041C +#define REG_FWHW_TXQ_CTRL 0x0420 +#define REG_HWSEQ_CTRL 0x0423 +#define REG_TXPKTBUF_BCNQ_BDNY 0x0424 +#define REG_TXPKTBUF_MGQ_BDNY 0x0425 +#define REG_LIFETIME_EN 0x0426 +#define REG_MULTI_BCNQ_OFFSET 0x0427 +#define REG_SPEC_SIFS 0x0428 +#define REG_RL 0x042A +#define REG_DARFRC 0x0430 +#define REG_RARFRC 0x0438 +#define REG_RRSR 0x0440 +#define REG_ARFR0 0x0444 +#define REG_ARFR1 0x0448 +#define REG_ARFR2 0x044C +#define REG_ARFR3 0x0450 +#define REG_AGGLEN_LMT 0x0458 +#define REG_AMPDU_MIN_SPACE 0x045C +#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045D +#define REG_FAST_EDCA_CTRL 0x0460 +#define REG_RD_RESP_PKT_TH 0x0463 +#define REG_INIRTS_RATE_SEL 0x0480 +#define REG_INIDATA_RATE_SEL 0x0484 + +#define REG_FW_TSF_SYNC_CNT 0x04A0 +#define REG_FW_BCN_DIS_CNT 0x04A1 + +#define REG_POWER_STATUS 0x04A4 +#define REG_POWER_STAGE1 0x04B4 +#define REG_POWER_STAGE2 0x04B8 +#define REG_PKT_VO_VI_LIFE_TIME 0x04C0 +#define REG_PKT_BE_BK_LIFE_TIME 0x04C2 +#define REG_STBC_SETTING 0x04C4 +#define REG_PROT_MODE_CTRL 0x04C8 +#define REG_MAX_AGGR_NUM 0x04CA +#define REG_RTS_MAX_AGGR_NUM 0x04CB +#define REG_BAR_MODE_CTRL 0x04CC +#define REG_RA_TRY_RATE_AGG_LMT 0x04CF +#define REG_EARLY_MODE_CONTROL 0x04D0 +#define REG_NQOS_SEQ 0x04DC +#define REG_QOS_SEQ 0x04DE +#define REG_NEED_CPU_HANDLE 0x04E0 +#define REG_PKT_LOSE_RPT 0x04E1 +#define REG_PTCL_ERR_STATUS 0x04E2 +#define REG_DUMMY 0x04FC + + + +//----------------------------------------------------- +// +// 0x0500h ~ 0x05FFh EDCA Configuration +// +//----------------------------------------------------- +#define REG_EDCA_VO_PARAM 0x0500 +#define REG_EDCA_VI_PARAM 0x0504 +#define REG_EDCA_BE_PARAM 0x0508 +#define REG_EDCA_BK_PARAM 0x050C +#define REG_BCNTCFG 0x0510 +#define REG_PIFS 0x0512 +#define REG_RDG_PIFS 0x0513 +#define REG_SIFS_CTX 0x0514 +#define REG_SIFS_TRX 0x0516 +#define REG_TSFTR_SYN_OFFSET 0x0518 +#define REG_AGGR_BREAK_TIME 0x051A +#define REG_SLOT 0x051B +#define REG_TX_PTCL_CTRL 0x0520 +#define REG_TXPAUSE 0x0522 +#define REG_DIS_TXREQ_CLR 0x0523 +#define REG_RD_CTRL 0x0524 +#define REG_TBTT_PROHIBIT 0x0540 +#define REG_RD_NAV_NXT 0x0544 +#define REG_NAV_PROT_LEN 0x0546 +#define REG_BCN_CTRL 0x0550 +#define REG_BCN_CTRL_1 0x0551 +#define REG_MBID_NUM 0x0552 +#define REG_DUAL_TSF_RST 0x0553 +#define REG_BCN_INTERVAL 0x0554 // The same as REG_MBSSID_BCN_SPACE +#define REG_MBSSID_BCN_SPACE 0x0554 +#define REG_DRVERLYINT 0x0558 +#define REG_BCNDMATIM 0x0559 +#define REG_ATIMWND 0x055A +#define REG_USTIME_TSF 0x055C +#define REG_BCN_MAX_ERR 0x055D +#define REG_RXTSF_OFFSET_CCK 0x055E +#define REG_RXTSF_OFFSET_OFDM 0x055F +#define REG_TSFTR 0x0560 +#define REG_TSFTR1 0x0568 +#define REG_INIT_TSFTR 0x0564 +#define REG_ATIMWND_1 0x0570 +#define REG_PSTIMER 0x0580 +#define REG_TIMER0 0x0584 +#define REG_TIMER1 0x0588 +#define REG_ACMHWCTRL 0x05C0 +#define REG_ACMRSTCTRL 0x05C1 +#define REG_ACMAVG 0x05C2 +#define REG_VO_ADMTIME 0x05C4 +#define REG_VI_ADMTIME 0x05C6 +#define REG_BE_ADMTIME 0x05C8 +#define REG_EDCA_RANDOM_GEN 0x05CC +#define REG_SCH_TXCMD 0x05D0 + +#define REG_DMC 0x05F0 //Dual MAC Co-Existence Register + + +//----------------------------------------------------- +// +// 0x0600h ~ 0x07FFh WMAC Configuration +// +//----------------------------------------------------- +#define REG_APSD_CTRL 0x0600 +#define REG_BWOPMODE 0x0603 +#define REG_TCR 0x0604 +#define REG_RCR 0x0608 +#define REG_RX_PKT_LIMIT 0x060C +#define REG_RX_DLK_TIME 0x060D +#define REG_RX_DRVINFO_SZ 0x060F + +#define REG_MACID 0x0610 +#define REG_BSSID 0x0618 +#define REG_MAR 0x0620 +#define REG_MBIDCAMCFG 0x0628 + +#define REG_USTIME_EDCA 0x0638 +#define REG_MAC_SPEC_SIFS 0x063A +#define REG_RESP_SIFS_CCK 0x063C +#define REG_RESP_SIFS_OFDM 0x063E +#define REG_ACKTO 0x0640 +#define REG_CTS2TO 0x0641 +#define REG_EIFS 0x0642 + + +//WMA, BA, CCX +#define REG_NAV_CTRL 0x0650 +#define REG_BACAMCMD 0x0654 +#define REG_BACAMCONTENT 0x0658 +#define REG_LBDLY 0x0660 +#define REG_FWDLY 0x0661 +#define REG_RXERR_RPT 0x0664 +#define REG_WMAC_TRXPTCL_CTL 0x0668 + + +// Security +#define REG_CAMCMD 0x0670 +#define REG_CAMWRITE 0x0674 +#define REG_CAMREAD 0x0678 +#define REG_CAMDBG 0x067C +#define REG_SECCFG 0x0680 + +// Power +#define REG_WOW_CTRL 0x0690 +#define REG_PSSTATUS 0x0691 +#define REG_PS_RX_INFO 0x0692 +#define REG_LPNAV_CTRL 0x0694 +#define REG_WKFMCAM_CMD 0x0698 +#define REG_WKFMCAM_RWD 0x069C +#define REG_RXFLTMAP0 0x06A0 +#define REG_RXFLTMAP1 0x06A2 +#define REG_RXFLTMAP2 0x06A4 +#define REG_BCN_PSR_RPT 0x06A8 +#define REG_CALB32K_CTRL 0x06AC +#define REG_PKT_MON_CTRL 0x06B4 +#define REG_BT_COEX_TABLE 0x06C0 +#define REG_WMAC_RESP_TXINFO 0x06D8 + +#define REG_MACID1 0x0700 +#define REG_BSSID1 0x0708 + +//----------------------------------------------------- +// +// 0xFE00h ~ 0xFE55h USB Configuration +// +//----------------------------------------------------- +#define REG_USB_INFO 0xFE17 +#define REG_USB_SPECIAL_OPTION 0xFE55 +#define REG_USB_DMA_AGG_TO 0xFE5B +#define REG_USB_AGG_TO 0xFE5C +#define REG_USB_AGG_TH 0xFE5D + +// for 92DU high_Queue low_Queue Normal_Queue select +#define REG_USB_High_NORMAL_Queue_Select_MAC0 0xFE44 +//#define REG_USB_LOW_Queue_Select_MAC0 0xFE45 +#define REG_USB_High_NORMAL_Queue_Select_MAC1 0xFE47 +//#define REG_USB_LOW_Queue_Select_MAC1 0xFE48 + +// For test chip +#define REG_TEST_USB_TXQS 0xFE48 +#define REG_TEST_SIE_VID 0xFE60 // 0xFE60~0xFE61 +#define REG_TEST_SIE_PID 0xFE62 // 0xFE62~0xFE63 +#define REG_TEST_SIE_OPTIONAL 0xFE64 +#define REG_TEST_SIE_CHIRP_K 0xFE65 +#define REG_TEST_SIE_PHY 0xFE66 // 0xFE66~0xFE6B +#define REG_TEST_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75 +#define REG_TEST_SIE_STRING 0xFE80 // 0xFE80~0xFEB9 + + +// For normal chip +#define REG_NORMAL_SIE_VID 0xFE60 // 0xFE60~0xFE61 +#define REG_NORMAL_SIE_PID 0xFE62 // 0xFE62~0xFE63 +#define REG_NORMAL_SIE_OPTIONAL 0xFE64 +#define REG_NORMAL_SIE_EP 0xFE65 // 0xFE65~0xFE67 +#define REG_NORMAL_SIE_PHY 0xFE68 // 0xFE68~0xFE6B +#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75 +#define REG_NORMAL_SIE_STRING 0xFE80 // 0xFE80~0xFEDF + + +//----------------------------------------------------- +// +// Redifine 8192C register definition for compatibility +// +//----------------------------------------------------- + +// TODO: use these definition when using REG_xxx naming rule. +// NOTE: DO NOT Remove these definition. Use later. + +#define SYS_ISO_CTRL REG_SYS_ISO_CTRL // System Isolation Interface Control. +#define SYS_FUNC_EN REG_SYS_FUNC_EN // System Function Enable. +#define SYS_CLK REG_SYS_CLKR +#define CR9346 REG_9346CR // 93C46/93C56 Command Register. +#define EFUSE_CTRL REG_EFUSE_CTRL // E-Fuse Control. +#define EFUSE_TEST REG_EFUSE_TEST // E-Fuse Test. +#define MSR (REG_CR + 2) // Media Status register +#define ISR REG_HISR +#define TSFR REG_TSFTR // Timing Sync Function Timer Register. + +#define MACIDR0 REG_MACID // MAC ID Register, Offset 0x0050-0x0053 +#define MACIDR4 (REG_MACID + 4) // MAC ID Register, Offset 0x0054-0x0055 + +#define PBP REG_PBP + +// Redifine MACID register, to compatible prior ICs. +#define IDR0 MACIDR0 +#define IDR4 MACIDR4 + + +// +// 9. Security Control Registers (Offset: ) +// +#define RWCAM REG_CAMCMD //IN 8190 Data Sheet is called CAMcmd +#define WCAMI REG_CAMWRITE // Software write CAM input content +#define RCAMO REG_CAMREAD // Software read/write CAM config +#define CAMDBG REG_CAMDBG +#define SECR REG_SECCFG //Security Configuration Register + +// Unused register +#define UnusedRegister 0x1BF +#define DCAM UnusedRegister +#define PSR UnusedRegister +#define BBAddr UnusedRegister +#define PhyDataR UnusedRegister + +#define InvalidBBRFValue 0x12345678 + +// Min Spacing related settings. +#define MAX_MSS_DENSITY_2T 0x13 +#define MAX_MSS_DENSITY_1T 0x0A + +//---------------------------------------------------------------------------- +// 8192C Cmd9346CR bits (Offset 0xA, 16bit) +//---------------------------------------------------------------------------- +#define CmdEEPROM_En BIT5 // EEPROM enable when set 1 +#define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 +#define Cmd9346CR_9356SEL BIT4 +#define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL) +#define AutoLoadEFUSE CmdEEPROM_En + +// 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) +//---------------------------------------------------------------------------- +#define GPIOSEL_GPIO 0 +#define GPIOSEL_ENBT BIT5 + +//---------------------------------------------------------------------------- +// 8192C GPIO PIN Control Register (offset 0x44, 4 byte) +//---------------------------------------------------------------------------- +#define GPIO_IN REG_GPIO_PIN_CTRL // GPIO pins input value +#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) // GPIO pins output value +#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. +#define GPIO_MOD (REG_GPIO_PIN_CTRL+3) + + +//---------------------------------------------------------------------------- +// 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) +//---------------------------------------------------------------------------- +/* +Network Type +00: No link +01: Link in ad hoc network +10: Link in infrastructure network +11: AP mode +Default: 00b. +*/ +#define MSR_NOLINK 0x00 +#define MSR_ADHOC 0x01 +#define MSR_INFRA 0x02 +#define MSR_AP 0x03 + +// +// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF) +// +//---------------------------------------------------------------------------- +// 8192C Response Rate Set Register (offset 0x181, 24bits) +//---------------------------------------------------------------------------- +#define RRSR_RSC_OFFSET 21 +#define RRSR_SHORT_OFFSET 23 +#define RRSR_RSC_BW_40M 0x600000 +#define RRSR_RSC_UPSUBCHNL 0x400000 +#define RRSR_RSC_LOWSUBCHNL 0x200000 +#define RRSR_SHORT 0x800000 +#define RRSR_1M BIT0 +#define RRSR_2M BIT1 +#define RRSR_5_5M BIT2 +#define RRSR_11M BIT3 +#define RRSR_6M BIT4 +#define RRSR_9M BIT5 +#define RRSR_12M BIT6 +#define RRSR_18M BIT7 +#define RRSR_24M BIT8 +#define RRSR_36M BIT9 +#define RRSR_48M BIT10 +#define RRSR_54M BIT11 +#define RRSR_MCS0 BIT12 +#define RRSR_MCS1 BIT13 +#define RRSR_MCS2 BIT14 +#define RRSR_MCS3 BIT15 +#define RRSR_MCS4 BIT16 +#define RRSR_MCS5 BIT17 +#define RRSR_MCS6 BIT18 +#define RRSR_MCS7 BIT19 +#define BRSR_AckShortPmb BIT23 +// CCK ACK: use Short Preamble or not + +//---------------------------------------------------------------------------- +// 8192C BW_OPMODE bits (Offset 0x203, 8bit) +//---------------------------------------------------------------------------- +#define BW_OPMODE_20MHZ BIT2 +#define BW_OPMODE_5G BIT1 +#define BW_OPMODE_11J BIT0 + + +//---------------------------------------------------------------------------- +// 8192C CAM Config Setting (offset 0x250, 1 byte) +//---------------------------------------------------------------------------- +#define CAM_VALID BIT15 +#define CAM_NOTVALID 0x0000 +#define CAM_USEDK BIT5 + +#define CAM_CONTENT_COUNT 8 + +#define CAM_NONE 0x0 +#define CAM_WEP40 0x01 +#define CAM_TKIP 0x02 +#define CAM_AES 0x04 +#define CAM_WEP104 0x05 +#define CAM_SMS4 0x6 + + +#define TOTAL_CAM_ENTRY 32 +#define HALF_CAM_ENTRY 16 + +#define CAM_CONFIG_USEDK _TRUE +#define CAM_CONFIG_NO_USEDK _FALSE + +#define CAM_WRITE BIT16 +#define CAM_READ 0x00000000 +#define CAM_POLLINIG BIT31 + +#define SCR_UseDK 0x01 +#define SCR_TxSecEnable 0x02 +#define SCR_RxSecEnable 0x04 + + +// +// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F) +// +//---------------------------------------------------------------------------- +// 8190 IMR/ISR bits (offset 0xfd, 8bits) +//---------------------------------------------------------------------------- +#define IMR8190_DISABLED 0x0 +// IMR DW0 Bit 0-31 +#define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6 +#define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5 +#define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4 +#define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3 +#define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2 +#define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1 +#define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8 +#define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7 +#define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6 +#define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5 +#define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4 +#define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3 +#define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2 +#define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1 +#define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2 +#define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1 +#define IMR_TXFOVW BIT15 // Transmit FIFO Overflow +#define IMR_PSTIMEOUT BIT14 // Power save time out interrupt +#define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0 +#define IMR_RXFOVW BIT12 // Receive FIFO Overflow +#define IMR_RDU BIT11 // Receive Descriptor Unavailable +#define IMR_ATIMEND BIT10 // For 92C,ATIM Window End Interrupt +#define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup +#define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt +#define IMR_TBDOK BIT7 // Transmit Beacon OK interrup +#define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt +#define IMR_TBDER BIT5 // For 92C,Transmit Beacon Error Interrupt +#define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt +#define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt +#define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt +#define IMR_VODOK BIT1 // AC_VO DMA Interrupt +#define IMR_ROK BIT0 // Receive DMA OK Interrupt + +// 13. Host Interrupt Status Extension Register (Offset: 0x012C-012Eh) +#define IMR_TXERR BIT11 +#define IMR_RXERR BIT10 +#define IMR_C2HCMD BIT9 +#define IMR_CPWM BIT8 +//RSVD [2-7] +#define IMR_OCPINT BIT1 +#define IMR_WLANOFF BIT0 + + + +//---------------------------------------------------------------------------- +// 8192D EFUSE +//---------------------------------------------------------------------------- +#define HWSET_MAX_SIZE 256 + +//---------------------------------------------------------------------------- +// 8192C EEPROM/EFUSE share register definition. +//---------------------------------------------------------------------------- + +// +// Default Value for EEPROM or EFUSE!!! +// +#define EEPROM_Default_TSSI 0x0 +#define EEPROM_Default_TxPowerDiff 0x0 +#define EEPROM_Default_CrystalCap 0x0 //92D default 0x0 +#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192CE(QFPN68) +#define EEPROM_Default_TxPower 0x1010 +#define EEPROM_Default_HT2T_TxPwr 0x10 + +#define EEPROM_Default_LegacyHTTxPowerDiff 0x4 +#define EEPROM_Default_ThermalMeter 0x12 + +#define EEPROM_Default_AntTxPowerDiff 0x0 +//#define EEPROM_Default_TxPwDiff_CrystalCap 0x5 +#define EEPROM_Default_TxPowerLevel_2G 0x2C +#define EEPROM_Default_TxPowerLevel_5G 0x22 + +#define EEPROM_Default_HT40_2SDiff 0x0 +#define EEPROM_Default_HT20_Diff 2 // HT20<->40 default Tx Power Index Difference +#define EEPROM_Default_LegacyHTTxPowerDiff 0x4 //OFDM Tx Power index diff +#define EEPROM_Default_HT40_PwrMaxOffset 0 +#define EEPROM_Default_HT20_PwrMaxOffset 0 + +// For debug +#define EEPROM_Default_PID 0x1234 +#define EEPROM_Default_VID 0x5678 +#define EEPROM_Default_CustomerID 0xAB +#define EEPROM_Default_SubCustomerID 0xCD +#define EEPROM_Default_Version 0 + +#define EEPROM_Default_externalPA_C9 0x00 +#define EEPROM_Default_externalPA_CC 0xFF +#define EEPROM_Default_internalPA_SP3T_C9 0xAA +#define EEPROM_Default_internalPA_SP3T_CC 0xAF +#define EEPROM_Default_internalPA_SPDT_C9 0xAA +#ifdef CONFIG_PCI_HCI +#define EEPROM_Default_internalPA_SPDT_CC 0xA0 +#else +#define EEPROM_Default_internalPA_SPDT_CC 0xFA +#endif + +#define EEPROM_CHANNEL_PLAN_FCC 0x0 +#define EEPROM_CHANNEL_PLAN_IC 0x1 +#define EEPROM_CHANNEL_PLAN_ETSI 0x2 +#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 +#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 +#define EEPROM_CHANNEL_PLAN_MKK 0x5 +#define EEPROM_CHANNEL_PLAN_MKK1 0x6 +#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 +#define EEPROM_CHANNEL_PLAN_TELEC 0x8 +#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 +#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA +#define EEPROM_CHANNEL_PLAN_NCC 0xB +#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 + + +#define EEPROM_CID_DEFAULT 0x0 +#define EEPROM_CID_TOSHIBA 0x4 +#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25. +#define EEPROM_CID_QMI 0x0D +#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 + + +#define RTL8192_EEPROM_ID 0x8129 +#define EEPROM_WAPI_SUPPORT 0x78 + + +#ifdef CONFIG_PCI_HCI +#define RT_IBSS_INT_MASKS (IMR_BcnInt | IMR_TBDOK | IMR_TBDER) +#define RT_AC_INT_MASKS (IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK) +#define RT_BSS_INT_MASKS (RT_IBSS_INT_MASKS) + +#define RTL8190_EEPROM_ID 0x8129 // 0-1 +#define EEPROM_HPON 0x02 // LDO settings.2-5 +#define EEPROM_CLK 0x06 // Clock settings.6-7 +#define EEPROM_MAC_FUNCTION 0x08 // SE Test mode.8 + +#define EEPROM_VID 0x28 // SE Vendor ID.A-B +#define EEPROM_DID 0x2A // SE Device ID. C-D +#define EEPROM_SVID 0x2C // SE Vendor ID.E-F +#define EEPROM_SMID 0x2E // SE PCI Subsystem ID. 10-11 + +#define EEPROM_MAC_ADDR 0x16 // SEMAC Address. 12-17 +#define EEPROM_MAC_ADDR_MAC0_92D 0x55 +#define EEPROM_MAC_ADDR_MAC1_92D 0x5B +//---------------------------------------------------------------- +// 2.4G band Tx power index setting +#define EEPROM_CCK_TX_PWR_INX_2G 0x61 +#define EEPROM_HT40_1S_TX_PWR_INX_2G 0x67 +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G 0x6D +#define EEPROM_HT20_TX_PWR_INX_DIFF_2G 0x70 +#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G 0x73 +#define EEPROM_HT40_MAX_PWR_OFFSET_2G 0x76 +#define EEPROM_HT20_MAX_PWR_OFFSET_2G 0x79 + +//5GL channel 32-64 +#define EEPROM_HT40_1S_TX_PWR_INX_5GL 0x7C +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL 0x82 +#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL 0x85 +#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL 0x88 +#define EEPROM_HT40_MAX_PWR_OFFSET_5GL 0x8B +#define EEPROM_HT20_MAX_PWR_OFFSET_5GL 0x8E + +//5GM channel 100-140 +#define EEPROM_HT40_1S_TX_PWR_INX_5GM 0x91 +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM 0x97 +#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM 0x9A +#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM 0x9D +#define EEPROM_HT40_MAX_PWR_OFFSET_5GM 0xA0 +#define EEPROM_HT20_MAX_PWR_OFFSET_5GM 0xA3 + +//5GH channel 149-165 +#define EEPROM_HT40_1S_TX_PWR_INX_5GH 0xA6 +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH 0xAC +#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH 0xAF +#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH 0xB2 +#define EEPROM_HT40_MAX_PWR_OFFSET_5GH 0xB5 +#define EEPROM_HT20_MAX_PWR_OFFSET_5GH 0xB8 + +#define EEPROM_CHANNEL_PLAN 0xBB // Map of supported channels. +#define EEPROM_IQK_DELTA 0xBC +#define EEPROM_LCK_DELTA 0xBC +#define EEPROM_XTAL_K 0xBD //[7:5] +#define EEPROM_TSSI_A_5G 0xBE +#define EEPROM_TSSI_B_5G 0xBF +#define EEPROM_TSSI_AB_5G 0xC0 +#define EEPROM_THERMAL_METER 0xC3 //[4:0] +#define EEPROM_PATHDIV 0xC4 +#define EEPROM_RF_OPT1 0xC4 +#define EEPROM_RF_OPT2 0xC5 +#define EEPROM_RF_OPT3 0xC6 +#define EEPROM_RF_OPT4 0xC7 +#define EEPROM_RF_OPT5 0xC8 +#define EEPROM_RF_OPT6 0xC9 +#define EEPROM_VERSION 0xCA +#define EEPROM_CUSTOMER_ID 0xCB +#define EEPROM_RF_OPT7 0xCC + +#define EEPROM_WIDIPAIRING_ADDR 0xF0 +#define EEPROM_WIDIPAIRING_KEY 0xF6 + +#define EEPROM_DEF_PART_NO 0x3FD //Byte +#define EEPROME_CHIP_VERSION_L 0x3FF +#define EEPROME_CHIP_VERSION_H 0x3FE +#endif + +#ifdef CONFIG_USB_HCI +#define RTL8190_EEPROM_ID 0x8129 // 0-1 +#define EEPROM_HPON 0x02 // LDO settings.2-5 +#define EEPROM_CLK 0x06 // Clock settings.6-7 +#define EEPROM_MAC_FUNCTION 0x08 // SE Test mode.8 + +#define EEPROM_VID 0xC // SE Vendor ID.A-B +#define EEPROM_PID 0xE // SE Device ID. C-D +#define EEPROM_ENDPOINT_SETTING 0x10 +#define EEPROM_CHIRP_K 0x12 // Changed +#define EEPROM_USB_PHY 0x13 // Changed +#define EEPROM_NORMAL_BoardType EEPROM_RF_OPT1 //[7:5] +#define EEPROM_MAC_ADDR 0x16 // SEMAC Address. 12-17 +#define EEPROM_STRING 0x1F +#define EEPROM_SUBCUSTOMER_ID 0x59 + +#define EEPROM_MAC_ADDR_MAC0_92D 0x19 +#define EEPROM_MAC_ADDR_MAC1_92D 0x5B +//---------------------------------------------------------------- +// 2.4G band Tx power index setting +#define EEPROM_CCK_TX_PWR_INX_2G 0x61 +#define EEPROM_HT40_1S_TX_PWR_INX_2G 0x67 +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G 0x6D +#define EEPROM_HT20_TX_PWR_INX_DIFF_2G 0x70 +#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G 0x73 +#define EEPROM_HT40_MAX_PWR_OFFSET_2G 0x76 +#define EEPROM_HT20_MAX_PWR_OFFSET_2G 0x79 + +//5GL channel 32-64 +#define EEPROM_HT40_1S_TX_PWR_INX_5GL 0x7C +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL 0x82 +#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL 0x85 +#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL 0x88 +#define EEPROM_HT40_MAX_PWR_OFFSET_5GL 0x8B +#define EEPROM_HT20_MAX_PWR_OFFSET_5GL 0x8E + +//5GM channel 100-140 +#define EEPROM_HT40_1S_TX_PWR_INX_5GM 0x91 +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM 0x97 +#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM 0x9A +#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM 0x9D +#define EEPROM_HT40_MAX_PWR_OFFSET_5GM 0xA0 +#define EEPROM_HT20_MAX_PWR_OFFSET_5GM 0xA3 + +//5GH channel 149-165 +#define EEPROM_HT40_1S_TX_PWR_INX_5GH 0xA6 +#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH 0xAC +#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH 0xAF +#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH 0xB2 +#define EEPROM_HT40_MAX_PWR_OFFSET_5GH 0xB5 +#define EEPROM_HT20_MAX_PWR_OFFSET_5GH 0xB8 + +#define EEPROM_CHANNEL_PLAN 0xBB // Map of supported channels. +#define EEPROM_TEST_CHANNEL_PLAN 0xBB +#define EEPROM_IQK_DELTA 0xBC +#define EEPROM_LCK_DELTA 0xBC +#define EEPROM_XTAL_K 0xBD //[7:5] +#define EEPROM_TSSI_A_5G 0xBE +#define EEPROM_TSSI_B_5G 0xBF +#define EEPROM_TSSI_AB_5G 0xC0 +#define EEPROM_THERMAL_METER 0xC3 //[4:0] +#define EEPROM_RF_OPT1 0xC4 +#define EEPROM_RF_OPT2 0xC5 +#define EEPROM_RF_OPT3 0xC6 +#define EEPROM_RF_OPT4 0xC7 +#define EEPROM_RF_OPT5 0xC8 +#define EEPROM_RF_OPT6 0xC9 +#define EEPROM_VERSION 0xCA +#define EEPROM_CUSTOMER_ID 0xCB +#define EEPROM_RF_OPT7 0xCC + +#define EEPROM_DEF_PART_NO 0x3FD //Byte +#define EEPROME_CHIP_VERSION_L 0x3FF +#define EEPROME_CHIP_VERSION_H 0x3FE + +//------------------------------------------------------------- +// EEPROM content definitions +//------------------------------------------------------------- +#define OS_LINK_SPEED_NORMAL_MASK BIT3 | BIT2 +#define OS_LINK_SPEED_TEST_MASK BIT3 | BIT4 + +#define BOARD_TYPE_NORMAL_MASK 0xE0 +#define BOARD_TYPE_TEST_MASK 0xF + +#define BT_COEXISTENCE_TEST BIT4 +#define BT_COEXISTENCE_NORMAL BIT5 + +#define BT_CO_SHIFT_TEST 4 +#define BT_CO_SHIFT_NORMAL 5 + +#define EP_NUMBER_MASK_TEST 0x30 //bit 4:5 0Eh +#define EP_NUMBER_SHIFT_TEST 4 + +#define USB_PHY_PARA_SIZE_TEST 6 +#define USB_PHY_PARA_SIZE_NORMAL 4 + +//------------------------------------------------------------- +// EEPROM default value definitions +//------------------------------------------------------------- +// Use 0xABCD instead of 0x8192 for debug +#define EEPROM_DEF_ID_0 0xCD // Byte 0x00 +#define EEPROM_DEF_ID_1 0xAB // Byte 0x01 + +#define EEPROM_DEF_RTK_RSV_A3 0x74 // Byte 0x03 +#define EEPROM_DEF_RTK_RSV_A4 0x6D // Byte 0x04 +#define EEPROM_DEF_RTK_RSV_A8 0xFF // Byte 0x08 + +#define EEPROM_DEF_VID_0 0x0A // Byte 0x0A +#define EEPROM_DEF_VID_1 0x0B + +#define EEPROM_DEF_PID_0 0x92 // Byte 0x0C +#define EEPROM_DEF_PID_1 0x81 + + +#define EEPROM_TEST_DEF_USB_OPT 0x80 // Byte 0x0E +#define EEPROM_NORMAL_DEF_USB_OPT 0x00 // Byte 0x0E + +#define EEPROM_DEF_CHIRPK 0x15 // Byte 0x0F + +#define EEPROM_DEF_USB_PHY_0 0x85 // Byte 0x10 +#define EEPROM_DEF_USB_PHY_1 0x62 // Byte 0x11 +#define EEPROM_DEF_USB_PHY_2 0x9E // Byte 0x12 +#define EEPROM_DEF_USB_PHY_3 0x06 // Byte 0x13 + +#define EEPROM_DEF_TSSI_A 0x09 // Byte 0x78 +#define EEPROM_DEF_TSSI_B 0x09 // Byte 0x79 + + +#define EEPROM_DEF_THERMAL_METER 0x12 // Byte 0x7A + + +#define EEPROM_USB_SN BIT(0) +#define EEPROM_USB_REMOTE_WAKEUP BIT(1) +#define EEPROM_USB_DEVICE_PWR BIT(2) +#define EEPROM_EP_NUMBER (BIT(3)|BIT(4)) + +#if 0 +#define EEPROM_CHANNEL_PLAN_FCC 0x0 +#define EEPROM_CHANNEL_PLAN_IC 0x1 +#define EEPROM_CHANNEL_PLAN_ETSI 0x2 +#define EEPROM_CHANNEL_PLAN_SPAIN 0x3 +#define EEPROM_CHANNEL_PLAN_FRANCE 0x4 +#define EEPROM_CHANNEL_PLAN_MKK 0x5 +#define EEPROM_CHANNEL_PLAN_MKK1 0x6 +#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7 +#define EEPROM_CHANNEL_PLAN_TELEC 0x8 +#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9 +#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA +#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80 + +#define EEPROM_CID_DEFAULT 0x0 + +#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108 + + +#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25. + +#endif +#endif + + +/*=================================================================== +===================================================================== +Here the register defines are for 92C. When the define is as same with 92C, +we will use the 92C's define for the consistency +So the following defines for 92C is not entire!!!!!! +===================================================================== +=====================================================================*/ +/* +Based on Datasheet V33---090401 +Register Summary +Current IOREG MAP +0x0000h ~ 0x00FFh System Configuration (256 Bytes) +0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes) +0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes) +0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes) +0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes) +0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes) +0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes) +0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes) +0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes) +*/ + +//---------------------------------------------------------------------------- +// 8192C (RCR) Receive Configuration Register (Offset 0x608, 32 bits) +//---------------------------------------------------------------------------- +#define RCR_APPFCS BIT31 //WMAC append FCS after pauload +#define RCR_APP_MIC BIT30 // +#define RCR_APP_ICV BIT29 // +#define RCR_APP_PHYST_RXFF BIT28 // +#define RCR_APP_BA_SSN BIT27 //Accept BA SSN +#define RCR_ENMBID BIT24 //Enable Multiple BssId. +#define RCR_LSIGEN BIT23 +#define RCR_MFBEN BIT22 +#define RCR_HTC_LOC_CTRL BIT14 //MFC<--HTC=1 MFC-->HTC=0 +#define RCR_AMF BIT13 //Accept management type frame +#define RCR_ACF BIT12 //Accept control type frame +#define RCR_ADF BIT11 //Accept data type frame +#define RCR_AICV BIT9 //Accept ICV error packet +#define RCR_ACRC32 BIT8 //Accept CRC32 error packet +#define RCR_CBSSID_BCN BIT7 //Accept BSSID match packet (Rx beacon, probe rsp) +#define RCR_CBSSID_DATA BIT6 //Accept BSSID match packet (Data) +#define RCR_CBSSID RCR_CBSSID_DATA //Accept BSSID match packet +#define RCR_APWRMGT BIT5 //Accept power management packet +#define RCR_ADD3 BIT4 //Accept address 3 match packet +#define RCR_AB BIT3 //Accept broadcast packet +#define RCR_AM BIT2 //Accept multicast packet +#define RCR_APM BIT1 //Accept physical match packet +#define RCR_AAP BIT0 //Accept all unicast packet +#define RCR_MXDMA_OFFSET 8 +#define RCR_FIFO_OFFSET 13 + + + +//============================================================================ +// 8192c USB specific Regsiter Offset and Content definition, +// 2009.08.18, added by vivi. for merge 92c and 92C into one driver +//============================================================================ +//#define APS_FSMCO 0x0004 same with 92Ce +#define RSV_CTRL 0x001C +#define RD_CTRL 0x0524 + +//----------------------------------------------------- +// +// 0xFE00h ~ 0xFE55h USB Configuration +// +//----------------------------------------------------- +#define REG_USB_INFO 0xFE17 +#define REG_USB_SPECIAL_OPTION 0xFE55 +#define REG_USB_DMA_AGG_TO 0xFE5B +#define REG_USB_AGG_TO 0xFE5C +#define REG_USB_AGG_TH 0xFE5D + +#define REG_USB_VID 0xFE60 +#define REG_USB_PID 0xFE62 +#define REG_USB_OPTIONAL 0xFE64 +#define REG_USB_CHIRP_K 0xFE65 +#define REG_USB_PHY 0xFE66 +#define REG_USB_MAC_ADDR 0xFE70 + +#define REG_USB_HRPWM 0xFE58 +#define REG_USB_HCPWM 0xFE57 + +#define InvalidBBRFValue 0x12345678 + +//============================================================================ +// 8192C Regsiter Bit and Content definition +//============================================================================ +//----------------------------------------------------- +// +// 0x0000h ~ 0x00FFh System Configuration +// +//----------------------------------------------------- + +//2 SPS0_CTRL +#define SW18_FPWM BIT(3) + + +//2 SYS_ISO_CTRL +#define ISO_MD2PP BIT(0) +#define ISO_UA2USB BIT(1) +#define ISO_UD2CORE BIT(2) +#define ISO_PA2PCIE BIT(3) +#define ISO_PD2CORE BIT(4) +#define ISO_IP2MAC BIT(5) +#define ISO_DIOP BIT(6) +#define ISO_DIOE BIT(7) +#define ISO_EB2CORE BIT(8) +#define ISO_DIOR BIT(9) + +#define PWC_EV25V BIT(14) +#define PWC_EV12V BIT(15) + + +//2 SYS_FUNC_EN +#define FEN_BBRSTB BIT(0) +#define FEN_BB_GLB_RSTn BIT(1) +#define FEN_USBA BIT(2) +#define FEN_UPLL BIT(3) +#define FEN_USBD BIT(4) +#define FEN_DIO_PCIE BIT(5) +#define FEN_PCIEA BIT(6) +#define FEN_PPLL BIT(7) +#define FEN_PCIED BIT(8) +#define FEN_DIOE BIT(9) +#define FEN_CPUEN BIT(10) +#define FEN_DCORE BIT(11) +#define FEN_ELDR BIT(12) +#define FEN_DIO_RF BIT(13) +#define FEN_HWPDN BIT(14) +#define FEN_MREGEN BIT(15) + +//2 APS_FSMCO +#define PFM_LDALL BIT(0) +#define PFM_ALDN BIT(1) +#define PFM_LDKP BIT(2) +#define PFM_WOWL BIT(3) +#define EnPDN BIT(4) +#define PDN_PL BIT(5) +#define APFM_ONMAC BIT(8) +#define APFM_OFF BIT(9) +#define APFM_RSM BIT(10) +#define AFSM_HSUS BIT(11) +#define AFSM_PCIE BIT(12) +#define APDM_MAC BIT(13) +#define APDM_HOST BIT(14) +#define APDM_HPDN BIT(15) +#define RDY_MACON BIT(16) +#define SUS_HOST BIT(17) +#define ROP_ALD BIT(20) +#define ROP_PWR BIT(21) +#define ROP_SPS BIT(22) +#define SOP_MRST BIT(25) +#define SOP_FUSE BIT(26) +#define SOP_ABG BIT(27) +#define SOP_AMB BIT(28) +#define SOP_RCK BIT(29) +#define SOP_A8M BIT(30) +#define XOP_BTCK BIT(31) + +//2 SYS_CLKR +#define ANAD16V_EN BIT(0) +#define ANA8M BIT(1) +#define MACSLP BIT(4) +#define LOADER_CLK_EN BIT(5) +#define _80M_SSC_DIS BIT(7) +#define _80M_SSC_EN_HO BIT(8) +#define PHY_SSC_RSTB BIT(9) +#define SEC_CLK_EN BIT(10) +#define MAC_CLK_EN BIT(11) +#define SYS_CLK_EN BIT(12) +#define RING_CLK_EN BIT(13) + + +//2 9346CR + +#define BOOT_FROM_EEPROM BIT(4) +#define EEPROM_EN BIT(5) + + +//2 AFE_MISC +#define AFE_BGEN BIT(0) +#define AFE_MBEN BIT(1) +#define MAC_ID_EN BIT(7) + + +//2 SPS0_CTRL + + +//2 SPS_OCP_CFG + + +//2 RSV_CTRL +#define WLOCK_ALL BIT(0) +#define WLOCK_00 BIT(1) +#define WLOCK_04 BIT(2) +#define WLOCK_08 BIT(3) +#define WLOCK_40 BIT(4) +#define R_DIS_PRST_0 BIT(5) +#define R_DIS_PRST_1 BIT(6) +#define LOCK_ALL_EN BIT(7) + +//2 RF_CTRL +#define RF_EN BIT(0) +#define RF_RSTB BIT(1) +#define RF_SDMRSTB BIT(2) + + + +//2 LDOA15_CTRL +#define LDA15_EN BIT(0) +#define LDA15_STBY BIT(1) +#define LDA15_OBUF BIT(2) +#define LDA15_REG_VOS BIT(3) +#define _LDA15_VOADJ(x) (((x) & 0x7) << 4) + + + +//2 LDOV12D_CTRL +#define LDV12_EN BIT(0) +#define LDV12_SDBY BIT(1) +#define LPLDO_HSM BIT(2) +#define LPLDO_LSM_DIS BIT(3) +#define _LDV12_VADJ(x) (((x) & 0xF) << 4) + + +//2 AFE_XTAL_CTRL +#define XTAL_EN BIT(0) +#define XTAL_BSEL BIT(1) +#define _XTAL_BOSC(x) (((x) & 0x3) << 2) +#define _XTAL_CADJ(x) (((x) & 0xF) << 4) +#define XTAL_GATE_USB BIT(8) +#define _XTAL_USB_DRV(x) (((x) & 0x3) << 9) +#define XTAL_GATE_AFE BIT(11) +#define _XTAL_AFE_DRV(x) (((x) & 0x3) << 12) +#define XTAL_RF_GATE BIT(14) +#define _XTAL_RF_DRV(x) (((x) & 0x3) << 15) +#define XTAL_GATE_DIG BIT(17) +#define _XTAL_DIG_DRV(x) (((x) & 0x3) << 18) +#define XTAL_BT_GATE BIT(20) +#define _XTAL_BT_DRV(x) (((x) & 0x3) << 21) +#define _XTAL_GPIO(x) (((x) & 0x7) << 23) + + +#define CKDLY_AFE BIT(26) +#define CKDLY_USB BIT(27) +#define CKDLY_DIG BIT(28) +#define CKDLY_BT BIT(29) + + +//2 AFE_PLL_CTRL +#define APLL_EN BIT(0) +#define APLL_320_EN BIT(1) +#define APLL_FREF_SEL BIT(2) +#define APLL_EDGE_SEL BIT(3) +#define APLL_WDOGB BIT(4) +#define APLL_LPFEN BIT(5) + +#define APLL_REF_CLK_13MHZ 0x1 +#define APLL_REF_CLK_19_2MHZ 0x2 +#define APLL_REF_CLK_20MHZ 0x3 +#define APLL_REF_CLK_25MHZ 0x4 +#define APLL_REF_CLK_26MHZ 0x5 +#define APLL_REF_CLK_38_4MHZ 0x6 +#define APLL_REF_CLK_40MHZ 0x7 + +#define APLL_320EN BIT(14) +#define APLL_80EN BIT(15) +#define APLL_1MEN BIT(24) + + +//2 EFUSE_CTRL +#define ALD_EN BIT(18) +#define EF_PD BIT(19) +#define EF_FLAG BIT(31) + +//2 EFUSE_TEST +#define EF_TRPT BIT(7) +#define LDOE25_EN BIT(31) + +//2 PWR_DATA + +//2 CAL_TIMER + +//2 ACLK_MON +#define RSM_EN BIT(0) +#define Timer_EN BIT(4) + + +//2 GPIO_MUXCFG +#define TRSW0EN BIT(2) +#define TRSW1EN BIT(3) +#define EROM_EN BIT(4) +#define EnBT BIT(5) +#define EnUart BIT(8) +#define Uart_910 BIT(9) +#define EnPMAC BIT(10) +#define SIC_SWRST BIT(11) +#define EnSIC BIT(12) +#define SIC_23 BIT(13) +#define EnHDP BIT(14) +#define SIC_LBK BIT(15) + +//2 GPIO_PIN_CTRL + + + +//2 GPIO_INTM + +//2 LEDCFG +#define LED0PL BIT(4) +#define LED1PL BIT(12) +#define LED0DIS BIT(7) + +#define SECCAM_CLR BIT(30) + +//2 FSIMR + +//2 FSISR + + +//2 8051FWDL +//2 MCUFWDL +#define MCUFWDL_EN BIT(0) +#define MCUFWDL_RDY BIT(1) +#define FWDL_ChkSum_rpt BIT(2) +#define MACINI_RDY BIT(3) +#define BBINI_RDY BIT(4) +#define RFINI_RDY BIT(5) +#define WINTINI_RDY BIT(6) +#define MAC1_WINTINI_RDY BIT(11)// 0X81 BIT3 +#define CPRST BIT(23) + + + + +//2 REG_SYS_CFG +#define XCLK_VLD BIT(0) +#define ACLK_VLD BIT(1) +#define UCLK_VLD BIT(2) +#define PCLK_VLD BIT(3) +#define PCIRSTB BIT(4) +#define V15_VLD BIT(5) +#define TRP_B15V_EN BIT(7) +#define SIC_IDLE BIT(8) +#define BD_MAC2 BIT(9) +#define BD_MAC1 BIT(10) +#define IC_MACPHY_MODE BIT(11) +#define PAD_HWPD_IDN BIT(22) +#define TRP_VAUX_EN BIT(23) +#define TRP_BT_EN BIT(24) +#define BD_PKG_SEL BIT(25) +#define BD_HCI_SEL BIT(26) +#define TYPE_ID BIT(27) + +#define CHIP_VER_RTL_MASK 0xF000 //Bit 12 ~ 15 +#define CHIP_VER_RTL_SHIFT 12 + +//----------------------------------------------------- +// +// 0x0100h ~ 0x01FFh MACTOP General Configuration +// +//----------------------------------------------------- + + +//2 Function Enable Registers +//2 CR + +#define REG_LBMODE (REG_CR + 3) + + +#define HCI_TXDMA_EN BIT(0) +#define HCI_RXDMA_EN BIT(1) +#define TXDMA_EN BIT(2) +#define RXDMA_EN BIT(3) +#define PROTOCOL_EN BIT(4) +#define SCHEDULE_EN BIT(5) +#define MACTXEN BIT(6) +#define MACRXEN BIT(7) +#define ENSWBCN BIT(8) +#define ENSEC BIT(9) + +// Network type +#define _NETTYPE(x) (((x) & 0x3) << 16) +#define MASK_NETTYPE 0x30000 +#define NT_NO_LINK 0x0 +#define NT_LINK_AD_HOC 0x1 +#define NT_LINK_AP 0x2 +#define NT_AS_AP 0x3 + +#define _LBMODE(x) (((x) & 0xF) << 24) +#define MASK_LBMODE 0xF000000 +#define LOOPBACK_NORMAL 0x0 +#define LOOPBACK_IMMEDIATELY 0xB +#define LOOPBACK_MAC_DELAY 0x3 +#define LOOPBACK_PHY 0x1 +#define LOOPBACK_DMA 0x7 + + +//2 PBP - Page Size Register +#define GET_RX_PAGE_SIZE(value) ((value) & 0xF) +#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4) +#define _PSRX_MASK 0xF +#define _PSTX_MASK 0xF0 +#define _PSRX(x) (x) +#define _PSTX(x) ((x) << 4) + +#define PBP_64 0x0 +#define PBP_128 0x1 +#define PBP_256 0x2 +#define PBP_512 0x3 +#define PBP_1024 0x4 + + +//2 TX/RXDMA +#define RXDMA_ARBBW_EN BIT(0) +#define RXSHFT_EN BIT(1) +#define RXDMA_AGG_EN BIT(2) +#define QS_VO_QUEUE BIT(8) +#define QS_VI_QUEUE BIT(9) +#define QS_BE_QUEUE BIT(10) +#define QS_BK_QUEUE BIT(11) +#define QS_MANAGER_QUEUE BIT(12) +#define QS_HIGH_QUEUE BIT(13) + +#define HQSEL_VOQ BIT(0) +#define HQSEL_VIQ BIT(1) +#define HQSEL_BEQ BIT(2) +#define HQSEL_BKQ BIT(3) +#define HQSEL_MGTQ BIT(4) +#define HQSEL_HIQ BIT(5) + +// For normal driver, 0x10C +#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14) +#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12) +#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10) +#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 ) +#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 ) +#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 ) + +#define QUEUE_LOW 1 +#define QUEUE_NORMAL 2 +#define QUEUE_HIGH 3 + + + +//2 TRXFF_BNDY + + +//2 LLT_INIT +#define _LLT_NO_ACTIVE 0x0 +#define _LLT_WRITE_ACCESS 0x1 +#define _LLT_READ_ACCESS 0x2 + +#define _LLT_INIT_DATA(x) ((x) & 0xFF) +#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8) +#define _LLT_OP(x) (((x) & 0x3) << 30) +#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3) + + +//2 BB_ACCESS_CTRL +#define BB_WRITE_READ_MASK (BIT(31) | BIT(30)) +#define BB_WRITE_EN BIT(30) +#define BB_READ_EN BIT(31) +//#define BB_ADDR_MASK 0xFFF +//#define _BB_ADDR(x) ((x) & BB_ADDR_MASK) + +//----------------------------------------------------- +// +// 0x0200h ~ 0x027Fh TXDMA Configuration +// +//----------------------------------------------------- +//2 RQPN +#define _HPQ(x) ((x) & 0xFF) +#define _LPQ(x) (((x) & 0xFF) << 8) +#define _PUBQ(x) (((x) & 0xFF) << 16) +#define _NPQ(x) ((x) & 0xFF) // NOTE: in RQPN_NPQ register + + +#define HPQ_PUBLIC_DIS BIT(24) +#define LPQ_PUBLIC_DIS BIT(25) +#define LD_RQPN BIT(31) + + +//2 TDECTRL +#define BCN_VALID BIT(16) +#define BCN_HEAD(x) (((x) & 0xFF) << 8) +#define BCN_HEAD_MASK 0xFF00 + +//2 TDECTL +#define BLK_DESC_NUM_SHIFT 4 +#define BLK_DESC_NUM_MASK 0xF + + +//2 TXDMA_OFFSET_CHK +#define DROP_DATA_EN BIT(9) + +//----------------------------------------------------- +// +// 0x0400h ~ 0x047Fh Protocol Configuration +// +//----------------------------------------------------- +//2 FWHW_TXQ_CTRL +#define EN_AMPDU_RTY_NEW BIT(7) + +//2 INIRTSMCS_SEL +#define _INIRTSMCS_SEL(x) ((x) & 0x3F) + + +//2 SPEC SIFS +#define _SPEC_SIFS_CCK(x) ((x) & 0xFF) +#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8) + + +//2 RRSR + +#define RATE_REG_BITMAP_ALL 0xFFFFF + +#define _RRSC_BITMAP(x) ((x) & 0xFFFFF) + +#define _RRSR_RSC(x) (((x) & 0x3) << 21) +#define RRSR_RSC_RESERVED 0x0 +#define RRSR_RSC_UPPER_SUBCHANNEL 0x1 +#define RRSR_RSC_LOWER_SUBCHANNEL 0x2 +#define RRSR_RSC_DUPLICATE_MODE 0x3 + + +//2 ARFR +#define USE_SHORT_G1 BIT(20) + +//2 AGGLEN_LMT_L +#define _AGGLMT_MCS0(x) ((x) & 0xF) +#define _AGGLMT_MCS1(x) (((x) & 0xF) << 4) +#define _AGGLMT_MCS2(x) (((x) & 0xF) << 8) +#define _AGGLMT_MCS3(x) (((x) & 0xF) << 12) +#define _AGGLMT_MCS4(x) (((x) & 0xF) << 16) +#define _AGGLMT_MCS5(x) (((x) & 0xF) << 20) +#define _AGGLMT_MCS6(x) (((x) & 0xF) << 24) +#define _AGGLMT_MCS7(x) (((x) & 0xF) << 28) + + +//2 RL +#define RETRY_LIMIT_SHORT_SHIFT 8 +#define RETRY_LIMIT_LONG_SHIFT 0 + + +//2 DARFRC +#define _DARF_RC1(x) ((x) & 0x1F) +#define _DARF_RC2(x) (((x) & 0x1F) << 8) +#define _DARF_RC3(x) (((x) & 0x1F) << 16) +#define _DARF_RC4(x) (((x) & 0x1F) << 24) +// NOTE: shift starting from address (DARFRC + 4) +#define _DARF_RC5(x) ((x) & 0x1F) +#define _DARF_RC6(x) (((x) & 0x1F) << 8) +#define _DARF_RC7(x) (((x) & 0x1F) << 16) +#define _DARF_RC8(x) (((x) & 0x1F) << 24) + + +//2 RARFRC +#define _RARF_RC1(x) ((x) & 0x1F) +#define _RARF_RC2(x) (((x) & 0x1F) << 8) +#define _RARF_RC3(x) (((x) & 0x1F) << 16) +#define _RARF_RC4(x) (((x) & 0x1F) << 24) +// NOTE: shift starting from address (RARFRC + 4) +#define _RARF_RC5(x) ((x) & 0x1F) +#define _RARF_RC6(x) (((x) & 0x1F) << 8) +#define _RARF_RC7(x) (((x) & 0x1F) << 16) +#define _RARF_RC8(x) (((x) & 0x1F) << 24) + + + + +//----------------------------------------------------- +// +// 0x0500h ~ 0x05FFh EDCA Configuration +// +//----------------------------------------------------- + + + +//2 EDCA setting +#define AC_PARAM_TXOP_LIMIT_OFFSET 16 +#define AC_PARAM_ECW_MAX_OFFSET 12 +#define AC_PARAM_ECW_MIN_OFFSET 8 +#define AC_PARAM_AIFS_OFFSET 0 + + +//2 EDCA_VO_PARAM +#define _AIFS(x) (x) +#define _ECW_MAX_MIN(x) ((x) << 8) +#define _TXOP_LIMIT(x) ((x) << 16) + + +#define _BCNIFS(x) ((x) & 0xFF) +#define _BCNECW(x) (((x) & 0xF))<< 8) + + +#define _LRL(x) ((x) & 0x3F) +#define _SRL(x) (((x) & 0x3F) << 8) + + +//2 SIFS_CCK +#define _SIFS_CCK_CTX(x) ((x) & 0xFF) +#define _SIFS_CCK_TRX(x) (((x) & 0xFF) << 8); + + +//2 SIFS_OFDM +#define _SIFS_OFDM_CTX(x) ((x) & 0xFF) +#define _SIFS_OFDM_TRX(x) (((x) & 0xFF) << 8); + + +//2 TBTT PROHIBIT +#define _TBTT_PROHIBIT_HOLD(x) (((x) & 0xFF) << 8) + + +//2 REG_RD_CTRL +#define DIS_EDCA_CNT_DWN BIT(11) + + +//2 BCN_CTRL +#define EN_MBSSID BIT(1) +#define EN_TXBCN_RPT BIT(2) +#define EN_BCN_FUNCTION BIT(3) +#define DIS_TSF_UPDATE BIT(3) + +// The same function but different bit field. +#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4) +#define DIS_TSF_UDT0_TEST_CHIP BIT(5) + +//2 ACMHWCTRL +#define AcmHw_HwEn BIT(0) +#define AcmHw_BeqEn BIT(1) +#define AcmHw_ViqEn BIT(2) +#define AcmHw_VoqEn BIT(3) +#define AcmHw_BeqStatus BIT(4) +#define AcmHw_ViqStatus BIT(5) +#define AcmHw_VoqStatus BIT(6) + + + +//----------------------------------------------------- +// +// 0x0600h ~ 0x07FFh WMAC Configuration +// +//----------------------------------------------------- + +//2 APSD_CTRL +#define APSDOFF BIT(6) +#define APSDOFF_STATUS BIT(7) + + +//2 BWOPMODE +#define BW_20MHZ BIT(2) +//#define BW_OPMODE_20MHZ BIT(2) // For compability + + +#define RATE_BITMAP_ALL 0xFFFFF + +// Only use CCK 1M rate for ACK +#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1 +#define RATE_RRSR_WITHOUT_CCK 0xFFFF0 + +//2 TCR +#define TSFRST BIT(0) +#define DIS_GCLK BIT(1) +#define PAD_SEL BIT(2) +#define PWR_ST BIT(6) +#define PWRBIT_OW_EN BIT(7) +#define ACRC BIT(8) +#define CFENDFORM BIT(9) +#define ICV BIT(10) + + + +//2 RCR +#define AAP BIT(0) +#define APM BIT(1) +#define AM BIT(2) +#define AB BIT(3) +#define ADD3 BIT(4) +#define APWRMGT BIT(5) +#define CBSSID BIT(6) +#define CBSSID_BCN BIT(7) +#define ACRC32 BIT(8) +#define AICV BIT(9) +#define ADF BIT(11) +#define ACF BIT(12) +#define AMF BIT(13) +#define HTC_LOC_CTRL BIT(14) +#define UC_DATA_EN BIT(16) +#define BM_DATA_EN BIT(17) +#define MFBEN BIT(22) +#define LSIGEN BIT(23) +#define EnMBID BIT(24) +#define APP_BASSN BIT(27) +#define APP_PHYSTS BIT(28) +#define APP_ICV BIT(29) +#define APP_MIC BIT(30) +#define APP_FCS BIT(31) + +//2 RX_PKT_LIMIT + +//2 RX_DLK_TIME + +//2 MBIDCAMCFG + + + +//2 AMPDU_MIN_SPACE +#define _MIN_SPACE(x) ((x) & 0x7) +#define _SHORT_GI_PADDING(x) (((x) & 0x1F) << 3) + + +//2 RXERR_RPT +#define RXERR_TYPE_OFDM_PPDU 0 +#define RXERR_TYPE_OFDM_FALSE_ALARM 1 +#define RXERR_TYPE_OFDM_MPDU_OK 2 +#define RXERR_TYPE_OFDM_MPDU_FAIL 3 +#define RXERR_TYPE_CCK_PPDU 4 +#define RXERR_TYPE_CCK_FALSE_ALARM 5 +#define RXERR_TYPE_CCK_MPDU_OK 6 +#define RXERR_TYPE_CCK_MPDU_FAIL 7 +#define RXERR_TYPE_HT_PPDU 8 +#define RXERR_TYPE_HT_FALSE_ALARM 9 +#define RXERR_TYPE_HT_MPDU_TOTAL 10 +#define RXERR_TYPE_HT_MPDU_OK 11 +#define RXERR_TYPE_HT_MPDU_FAIL 12 +#define RXERR_TYPE_RX_FULL_DROP 15 + +#define RXERR_COUNTER_MASK 0xFFFFF +#define RXERR_RPT_RST BIT(27) +#define _RXERR_RPT_SEL(type) ((type) << 28) + + +//2 SECCFG +#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key +#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key +#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption +#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption +#define SCR_SKByA2 BIT(4) //Search kEY BY A2 +#define SCR_NoSKMC BIT(5) //No Key Search Multicast +#define SCR_TXBCUSEDK BIT(6) // Force Tx Broadcast packets Use Default Key +#define SCR_RXBCUSEDK BIT(7) // Force Rx Broadcast packets Use Default Key + +//vivi added for new cam search flow, 20091028 +#ifdef HW_EN_DE_CRYPTION_FOR_NEW_CAM_SEARCH_FLOW +#define SCR_TxUseBroadcastDK BIT6 //Force Tx Use Broadcast Default Key +#define SCR_RxUseBroadcastDK BIT7 //Force Rx Use Broadcast Default Key +#endif + + +//----------------------------------------------------- +// +// 0xFE00h ~ 0xFE55h USB Configuration +// +//----------------------------------------------------- + +//2 USB Information (0xFE17) +#define USB_IS_HIGH_SPEED 0 +#define USB_IS_FULL_SPEED 1 +#define USB_SPEED_MASK BIT(5) + +#define USB_NORMAL_SIE_EP_MASK 0xF +#define USB_NORMAL_SIE_EP_SHIFT 4 + +#define USB_TEST_EP_MASK 0x30 +#define USB_TEST_EP_SHIFT 4 + +//2 Special Option +#define USB_AGG_EN BIT(3) + + +//2REG_C2HEVT_CLEAR +#define C2H_EVT_HOST_CLOSE 0x00 // Set by driver and notify FW that the driver has read the C2H command message +#define C2H_EVT_FW_CLOSE 0xFF // Set by FW indicating that FW had set the C2H command message and it's not yet read by driver. + +//2 8192D PartNo. +#define PARTNO_92D_NIC (BIT7|BIT6) +#define PARTNO_92D_NIC_REMARK (BIT5|BIT4) +#define PARTNO_SINGLE_BAND_VS BIT3 +#define PARTNO_SINGLE_BAND_VS_REMARK BIT1 +#define PARTNO_CONCURRENT_BAND_VC (BIT3|BIT2) +#define PARTNO_CONCURRENT_BAND_VC_REMARK (BIT1|BIT0) +//======================================================== +// General definitions +//======================================================== + +#define MAC_ADDR_LEN 6 +#define LAST_ENTRY_OF_TX_PKT_BUFFER 255 +#define LAST_ENTRY_OF_TX_PKT_BUFFER_DUAL_MAC 127 + +#define POLLING_LLT_THRESHOLD 20 +#define POLLING_READY_TIMEOUT_COUNT 1000 + +// Min Spacing related settings. +#define MAX_MSS_DENSITY_2T 0x13 +#define MAX_MSS_DENSITY_1T 0x0A +// GPIO BIT +#define HAL_8192C_HW_GPIO_WPS_BIT BIT2 + + +#include "basic_types.h" + +#endif + |