diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_bt_mp.h')
-rwxr-xr-x | drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_bt_mp.h | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_bt_mp.h b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_bt_mp.h new file mode 100755 index 000000000000..9a73aa3d1f33 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_bt_mp.h @@ -0,0 +1,318 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ + +#ifndef __RTW_BT_MP_H +#define __RTW_BT_MP_H + +#include <osdep_service.h> +#include <drv_types.h> +#include <rtw_mp.h> + + +#if(MP_DRIVER == 1) + +#pragma pack(1) + +// definition for BT_UP_OP_BT_READY +#define MP_BT_NOT_READY 0 +#define MP_BT_READY 1 + +// definition for BT_UP_OP_BT_SET_MODE +typedef enum _MP_BT_MODE{ + MP_BT_MODE_RF_TXRX_TEST_MODE = 0, + MP_BT_MODE_BT20_DUT_TEST_MODE = 1, + MP_BT_MODE_BT40_DIRECT_TEST_MODE = 2, + MP_BT_MODE_CONNECT_TEST_MODE = 3, + MP_BT_MODE_MAX +}MP_BT_MODE,*PMP_BT_MODE; + + +// definition for BT_UP_OP_BT_SET_TX_RX_PARAMETER +typedef struct _BT_TXRX_PARAMETERS{ + u1Byte txrxChannel; + u4Byte txrxTxPktCnt; + u1Byte txrxTxPktInterval; + u1Byte txrxPayloadType; + u1Byte txrxPktType; + u2Byte txrxPayloadLen; + u4Byte txrxPktHeader; + u1Byte txrxWhitenCoeff; + u1Byte txrxBdaddr[6]; + u1Byte txrxTxGainIndex; +} BT_TXRX_PARAMETERS, *PBT_TXRX_PARAMETERS; + +// txrxPktType +typedef enum _MP_BT_PKT_TYPE{ + MP_BT_PKT_DH1 = 0, + MP_BT_PKT_DH3 = 1, + MP_BT_PKT_DH5 = 2, + MP_BT_PKT_2DH1 = 3, + MP_BT_PKT_2DH3 = 4, + MP_BT_PKT_2DH5 = 5, + MP_BT_PKT_3DH1 = 6, + MP_BT_PKT_3DH3 = 7, + MP_BT_PKT_3DH5 = 8, + MP_BT_PKT_LE = 9, + MP_BT_PKT_MAX +}MP_BT_PKT_TYPE,*PMP_BT_PKT_TYPE; +// txrxPayloadType +typedef enum _MP_BT_PAYLOAD_TYPE{ + MP_BT_PAYLOAD_01010101 = 0, + MP_BT_PAYLOAD_ALL_1 = 1, + MP_BT_PAYLOAD_ALL_0 = 2, + MP_BT_PAYLOAD_11110000 = 3, + MP_BT_PAYLOAD_PRBS9 = 4, + MP_BT_PAYLOAD_MAX +}MP_BT_PAYLOAD_TYPE,*PMP_BT_PAYLOAD_TYPE; + + +// definition for BT_UP_OP_BT_TEST_CTRL +typedef enum _MP_BT_TEST_CTRL{ + MP_BT_TEST_STOP_ALL_TESTS = 0, + MP_BT_TEST_START_RX_TEST = 1, + MP_BT_TEST_START_PACKET_TX_TEST = 2, + MP_BT_TEST_START_CONTINUOUS_TX_TEST = 3, + MP_BT_TEST_START_INQUIRY_SCAN_TEST = 4, + MP_BT_TEST_START_PAGE_SCAN_TEST = 5, + MP_BT_TEST_START_INQUIRY_PAGE_SCAN_TEST = 6, + MP_BT_TEST_START_LEGACY_CONNECT_TEST = 7, + MP_BT_TEST_START_LE_CONNECT_TEST_INITIATOR = 8, + MP_BT_TEST_START_LE_CONNECT_TEST_ADVERTISER = 9, + MP_BT_TEST_MAX +}MP_BT_TEST_CTRL,*PMP_BT_TEST_CTRL; + + +typedef enum _RTL_EXT_C2H_EVT +{ + EXT_C2H_WIFI_FW_ACTIVE_RSP = 0, + EXT_C2H_TRIG_BY_BT_FW = 1, + MAX_EXT_C2HEVENT +}RTL_EXT_C2H_EVT; + + +// return status definition to the user layer +typedef enum _BT_CTRL_STATUS{ + BT_STATUS_SUCCESS = 0x00, // Success + BT_STATUS_BT_OP_SUCCESS = 0x01, // bt fw op execution success + BT_STATUS_H2C_SUCCESS = 0x02, // H2c success + BT_STATUS_H2C_TIMTOUT = 0x03, // H2c timeout + BT_STATUS_H2C_BT_NO_RSP = 0x04, // H2c sent, bt no rsp + BT_STATUS_C2H_SUCCESS = 0x05, // C2h success + BT_STATUS_C2H_REQNUM_MISMATCH = 0x06, // bt fw wrong rsp + BT_STATUS_OPCODE_U_VERSION_MISMATCH = 0x07, // Upper layer OP code version mismatch. + BT_STATUS_OPCODE_L_VERSION_MISMATCH = 0x08, // Lower layer OP code version mismatch. + BT_STATUS_UNKNOWN_OPCODE_U = 0x09, // Unknown Upper layer OP code + BT_STATUS_UNKNOWN_OPCODE_L = 0x0a, // Unknown Lower layer OP code + BT_STATUS_PARAMETER_FORMAT_ERROR_U = 0x0b, // Wrong parameters sent by upper layer. + BT_STATUS_PARAMETER_FORMAT_ERROR_L = 0x0c, // bt fw parameter format is not consistency + BT_STATUS_PARAMETER_OUT_OF_RANGE_U = 0x0d, // uppery layer parameter value is out of range + BT_STATUS_PARAMETER_OUT_OF_RANGE_L = 0x0e, // bt fw parameter value is out of range + BT_STATUS_UNKNOWN_STATUS_L = 0x0f, // bt returned an defined status code + BT_STATUS_UNKNOWN_STATUS_H = 0x10, // driver need to do error handle or not handle-well. + BT_STATUS_WRONG_LEVEL = 0x11, // should be under passive level + BT_STATUS_MAX +}BT_CTRL_STATUS,*PBT_CTRL_STATUS; + +// OP codes definition between the user layer and driver +typedef enum _BT_CTRL_OPCODE_UPPER{ + BT_UP_OP_BT_READY = 0x00, + BT_UP_OP_BT_SET_MODE = 0x01, + BT_UP_OP_BT_SET_TX_RX_PARAMETER = 0x02, + BT_UP_OP_BT_SET_GENERAL = 0x03, + BT_UP_OP_BT_GET_GENERAL = 0x04, + BT_UP_OP_BT_TEST_CTRL = 0x05, + BT_UP_OP_TEST_BT = 0x06, + BT_UP_OP_MAX +}BT_CTRL_OPCODE_UPPER,*PBT_CTRL_OPCODE_UPPER; + + +typedef enum _BT_SET_GENERAL{ + BT_GSET_REG = 0x00, + BT_GSET_RESET = 0x01, + BT_GSET_TARGET_BD_ADDR = 0x02, + BT_GSET_TX_PWR_FINETUNE = 0x03, + BT_SET_TRACKING_INTERVAL = 0x04, + BT_SET_THERMAL_METER = 0x05, + BT_ENABLE_CFO_TRACKING = 0x06, + BT_GSET_UPDATE_BT_PATCH = 0x07, + BT_GSET_MAX +}BT_SET_GENERAL,*PBT_SET_GENERAL; + +typedef enum _BT_GET_GENERAL{ + BT_GGET_REG = 0x00, + BT_GGET_STATUS = 0x01, + BT_GGET_REPORT = 0x02, + BT_GGET_AFH_MAP = 0x03, + BT_GGET_AFH_STATUS = 0x04, + BT_GGET_MAX +}BT_GET_GENERAL,*PBT_GET_GENERAL; + +// definition for BT_UP_OP_BT_SET_GENERAL +typedef enum _BT_REG_TYPE{ + BT_REG_RF = 0, + BT_REG_MODEM = 1, + BT_REG_BLUEWIZE = 2, + BT_REG_VENDOR = 3, + BT_REG_LE = 4, + BT_REG_MAX +}BT_REG_TYPE,*PBT_REG_TYPE; + +// definition for BT_LO_OP_GET_AFH_MAP +typedef enum _BT_AFH_MAP_TYPE{ + BT_AFH_MAP_RESULT = 0, + BT_AFH_MAP_WIFI_PSD_ONLY = 1, + BT_AFH_MAP_WIFI_CH_BW_ONLY = 2, + BT_AFH_MAP_BT_PSD_ONLY = 3, + BT_AFH_MAP_HOST_CLASSIFICATION_ONLY = 4, + BT_AFH_MAP_MAX +}BT_AFH_MAP_TYPE,*PBT_AFH_MAP_TYPE; + +// definition for BT_UP_OP_BT_GET_GENERAL +typedef enum _BT_REPORT_TYPE{ + BT_REPORT_RX_PACKET_CNT = 0, + BT_REPORT_RX_ERROR_BITS = 1, + BT_REPORT_RSSI = 2, + BT_REPORT_CFO_HDR_QUALITY = 3, + BT_REPORT_CONNECT_TARGET_BD_ADDR = 4, + BT_REPORT_MAX +}BT_REPORT_TYPE,*PBT_REPORT_TYPE; + +VOID +MPTBT_Test( + IN PADAPTER Adapter, + IN u1Byte opCode, + IN u1Byte byte1, + IN u1Byte byte2, + IN u1Byte byte3 + ); + +NDIS_STATUS +MPTBT_SendOidBT( + IN PADAPTER pAdapter, + IN PVOID InformationBuffer, + IN ULONG InformationBufferLength, + OUT PULONG BytesRead, + OUT PULONG BytesNeeded + ); + +VOID +MPTBT_FwC2hBtMpCtrl( + PADAPTER Adapter, + pu1Byte tmpBuf, + u1Byte length + ); + +void MPh2c_timeout_handle(void *FunctionContext); + +VOID mptbt_BtControlProcess( + PADAPTER Adapter, + PVOID pInBuf + ); + +#define BT_H2C_MAX_RETRY 1 +#define BT_MAX_C2H_LEN 20 + +typedef struct _BT_REQ_CMD{ + UCHAR opCodeVer; + UCHAR OpCode; + USHORT paraLength; + UCHAR pParamStart[100]; +} BT_REQ_CMD, *PBT_REQ_CMD; + +typedef struct _BT_RSP_CMD{ + USHORT status; + USHORT paraLength; + UCHAR pParamStart[100]; +} BT_RSP_CMD, *PBT_RSP_CMD; + + +typedef struct _BT_H2C{ + u1Byte opCodeVer:4; + u1Byte reqNum:4; + u1Byte opCode; + u1Byte buf[100]; +}BT_H2C, *PBT_H2C; + + + +typedef struct _BT_EXT_C2H{ + u1Byte extendId; + u1Byte statusCode:4; + u1Byte retLen:4; + u1Byte opCodeVer:4; + u1Byte reqNum:4; + u1Byte buf[100]; +}BT_EXT_C2H, *PBT_EXT_C2H; + +typedef enum _BT_OPCODE_STATUS{ + BT_OP_STATUS_SUCCESS = 0x00, // Success + BT_OP_STATUS_VERSION_MISMATCH = 0x01, + BT_OP_STATUS_UNKNOWN_OPCODE = 0x02, + BT_OP_STATUS_ERROR_PARAMETER = 0x03, + BT_OP_STATUS_MAX +}BT_OPCODE_STATUS,*PBT_OPCODE_STATUS; + + +//OP codes definition between driver and bt fw +typedef enum _BT_CTRL_OPCODE_LOWER{ + BT_LO_OP_GET_BT_VERSION = 0x00, + BT_LO_OP_RESET = 0x01, + BT_LO_OP_TEST_CTRL = 0x02, + BT_LO_OP_SET_BT_MODE = 0x03, + BT_LO_OP_SET_CHNL_TX_GAIN = 0x04, + BT_LO_OP_SET_PKT_TYPE_LEN = 0x05, + BT_LO_OP_SET_PKT_CNT_L_PL_TYPE = 0x06, + BT_LO_OP_SET_PKT_CNT_H_PKT_INTV = 0x07, + BT_LO_OP_SET_PKT_HEADER = 0x08, + BT_LO_OP_SET_WHITENCOEFF = 0x09, + BT_LO_OP_SET_BD_ADDR_L = 0x0a, + BT_LO_OP_SET_BD_ADDR_H = 0x0b, + BT_LO_OP_WRITE_REG_ADDR = 0x0c, + BT_LO_OP_WRITE_REG_VALUE = 0x0d, + BT_LO_OP_GET_BT_STATUS = 0x0e, + BT_LO_OP_GET_BD_ADDR_L = 0x0f, + BT_LO_OP_GET_BD_ADDR_H = 0x10, + BT_LO_OP_READ_REG = 0x11, + BT_LO_OP_SET_TARGET_BD_ADDR_L = 0x12, + BT_LO_OP_SET_TARGET_BD_ADDR_H = 0x13, + BT_LO_OP_SET_TX_POWER_CALIBRATION = 0x14, + BT_LO_OP_GET_RX_PKT_CNT_L = 0x15, + BT_LO_OP_GET_RX_PKT_CNT_H = 0x16, + BT_LO_OP_GET_RX_ERROR_BITS_L = 0x17, + BT_LO_OP_GET_RX_ERROR_BITS_H = 0x18, + BT_LO_OP_GET_RSSI = 0x19, + BT_LO_OP_GET_CFO_HDR_QUALITY_L = 0x1a, + BT_LO_OP_GET_CFO_HDR_QUALITY_H = 0x1b, + BT_LO_OP_GET_TARGET_BD_ADDR_L = 0x1c, + BT_LO_OP_GET_TARGET_BD_ADDR_H = 0x1d, + BT_LO_OP_GET_AFH_MAP_L = 0x1e, + BT_LO_OP_GET_AFH_MAP_M = 0x1f, + BT_LO_OP_GET_AFH_MAP_H = 0x20, + BT_LO_OP_GET_AFH_STATUS = 0x21, + BT_LO_OP_SET_TRACKING_INTERVAL = 0x22, + BT_LO_OP_SET_THERMAL_METER = 0x23, + BT_LO_OP_ENABLE_CFO_TRACKING = 0x24, + BT_LO_OP_MAX +}BT_CTRL_OPCODE_LOWER,*PBT_CTRL_OPCODE_LOWER; + +#endif /* #if(MP_DRIVER == 1) */ + +#endif // #ifndef __INC_MPT_BT_H + |