diff options
Diffstat (limited to 'drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_mp.h')
| -rwxr-xr-x | drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_mp.h | 772 |
1 files changed, 772 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_mp.h b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_mp.h new file mode 100755 index 000000000000..c089245f67c8 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8723as/include/rtw_mp.h @@ -0,0 +1,772 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#ifndef _RTW_MP_H_ +#define _RTW_MP_H_ + +#ifndef PLATFORM_WINDOWS +// 00 - Success +// 11 - Error +#define STATUS_SUCCESS (0x00000000L) +#define STATUS_PENDING (0x00000103L) + +#define STATUS_UNSUCCESSFUL (0xC0000001L) +#define STATUS_INSUFFICIENT_RESOURCES (0xC000009AL) +#define STATUS_NOT_SUPPORTED (0xC00000BBL) + +#define NDIS_STATUS_SUCCESS ((NDIS_STATUS)STATUS_SUCCESS) +#define NDIS_STATUS_PENDING ((NDIS_STATUS)STATUS_PENDING) +#define NDIS_STATUS_NOT_RECOGNIZED ((NDIS_STATUS)0x00010001L) +#define NDIS_STATUS_NOT_COPIED ((NDIS_STATUS)0x00010002L) +#define NDIS_STATUS_NOT_ACCEPTED ((NDIS_STATUS)0x00010003L) +#define NDIS_STATUS_CALL_ACTIVE ((NDIS_STATUS)0x00010007L) + +#define NDIS_STATUS_FAILURE ((NDIS_STATUS)STATUS_UNSUCCESSFUL) +#define NDIS_STATUS_RESOURCES ((NDIS_STATUS)STATUS_INSUFFICIENT_RESOURCES) +#define NDIS_STATUS_CLOSING ((NDIS_STATUS)0xC0010002L) +#define NDIS_STATUS_BAD_VERSION ((NDIS_STATUS)0xC0010004L) +#define NDIS_STATUS_BAD_CHARACTERISTICS ((NDIS_STATUS)0xC0010005L) +#define NDIS_STATUS_ADAPTER_NOT_FOUND ((NDIS_STATUS)0xC0010006L) +#define NDIS_STATUS_OPEN_FAILED ((NDIS_STATUS)0xC0010007L) +#define NDIS_STATUS_DEVICE_FAILED ((NDIS_STATUS)0xC0010008L) +#define NDIS_STATUS_MULTICAST_FULL ((NDIS_STATUS)0xC0010009L) +#define NDIS_STATUS_MULTICAST_EXISTS ((NDIS_STATUS)0xC001000AL) +#define NDIS_STATUS_MULTICAST_NOT_FOUND ((NDIS_STATUS)0xC001000BL) +#define NDIS_STATUS_REQUEST_ABORTED ((NDIS_STATUS)0xC001000CL) +#define NDIS_STATUS_RESET_IN_PROGRESS ((NDIS_STATUS)0xC001000DL) +#define NDIS_STATUS_CLOSING_INDICATING ((NDIS_STATUS)0xC001000EL) +#define NDIS_STATUS_NOT_SUPPORTED ((NDIS_STATUS)STATUS_NOT_SUPPORTED) +#define NDIS_STATUS_INVALID_PACKET ((NDIS_STATUS)0xC001000FL) +#define NDIS_STATUS_OPEN_LIST_FULL ((NDIS_STATUS)0xC0010010L) +#define NDIS_STATUS_ADAPTER_NOT_READY ((NDIS_STATUS)0xC0010011L) +#define NDIS_STATUS_ADAPTER_NOT_OPEN ((NDIS_STATUS)0xC0010012L) +#define NDIS_STATUS_NOT_INDICATING ((NDIS_STATUS)0xC0010013L) +#define NDIS_STATUS_INVALID_LENGTH ((NDIS_STATUS)0xC0010014L) +#define NDIS_STATUS_INVALID_DATA ((NDIS_STATUS)0xC0010015L) +#define NDIS_STATUS_BUFFER_TOO_SHORT ((NDIS_STATUS)0xC0010016L) +#define NDIS_STATUS_INVALID_OID ((NDIS_STATUS)0xC0010017L) +#define NDIS_STATUS_ADAPTER_REMOVED ((NDIS_STATUS)0xC0010018L) +#define NDIS_STATUS_UNSUPPORTED_MEDIA ((NDIS_STATUS)0xC0010019L) +#define NDIS_STATUS_GROUP_ADDRESS_IN_USE ((NDIS_STATUS)0xC001001AL) +#define NDIS_STATUS_FILE_NOT_FOUND ((NDIS_STATUS)0xC001001BL) +#define NDIS_STATUS_ERROR_READING_FILE ((NDIS_STATUS)0xC001001CL) +#define NDIS_STATUS_ALREADY_MAPPED ((NDIS_STATUS)0xC001001DL) +#define NDIS_STATUS_RESOURCE_CONFLICT ((NDIS_STATUS)0xC001001EL) +#define NDIS_STATUS_NO_CABLE ((NDIS_STATUS)0xC001001FL) + +#define NDIS_STATUS_INVALID_SAP ((NDIS_STATUS)0xC0010020L) +#define NDIS_STATUS_SAP_IN_USE ((NDIS_STATUS)0xC0010021L) +#define NDIS_STATUS_INVALID_ADDRESS ((NDIS_STATUS)0xC0010022L) +#define NDIS_STATUS_VC_NOT_ACTIVATED ((NDIS_STATUS)0xC0010023L) +#define NDIS_STATUS_DEST_OUT_OF_ORDER ((NDIS_STATUS)0xC0010024L) // cause 27 +#define NDIS_STATUS_VC_NOT_AVAILABLE ((NDIS_STATUS)0xC0010025L) // cause 35,45 +#define NDIS_STATUS_CELLRATE_NOT_AVAILABLE ((NDIS_STATUS)0xC0010026L) // cause 37 +#define NDIS_STATUS_INCOMPATABLE_QOS ((NDIS_STATUS)0xC0010027L) // cause 49 +#define NDIS_STATUS_AAL_PARAMS_UNSUPPORTED ((NDIS_STATUS)0xC0010028L) // cause 93 +#define NDIS_STATUS_NO_ROUTE_TO_DESTINATION ((NDIS_STATUS)0xC0010029L) // cause 3 +#endif /* #ifndef PLATFORM_WINDOWS */ + +#if 0 +#define MPT_NOOP 0 +#define MPT_READ_MAC_1BYTE 1 +#define MPT_READ_MAC_2BYTE 2 +#define MPT_READ_MAC_4BYTE 3 +#define MPT_WRITE_MAC_1BYTE 4 +#define MPT_WRITE_MAC_2BYTE 5 +#define MPT_WRITE_MAC_4BYTE 6 +#define MPT_READ_BB_CCK 7 +#define MPT_WRITE_BB_CCK 8 +#define MPT_READ_BB_OFDM 9 +#define MPT_WRITE_BB_OFDM 10 +#define MPT_READ_RF 11 +#define MPT_WRITE_RF 12 +#define MPT_READ_EEPROM_1BYTE 13 +#define MPT_WRITE_EEPROM_1BYTE 14 +#define MPT_READ_EEPROM_2BYTE 15 +#define MPT_WRITE_EEPROM_2BYTE 16 +#define MPT_SET_CSTHRESHOLD 21 +#define MPT_SET_INITGAIN 22 +#define MPT_SWITCH_BAND 23 +#define MPT_SWITCH_CHANNEL 24 +#define MPT_SET_DATARATE 25 +#define MPT_SWITCH_ANTENNA 26 +#define MPT_SET_TX_POWER 27 +#define MPT_SET_CONT_TX 28 +#define MPT_SET_SINGLE_CARRIER 29 +#define MPT_SET_CARRIER_SUPPRESSION 30 +#define MPT_GET_RATE_TABLE 31 +#define MPT_READ_TSSI 32 +#define MPT_GET_THERMAL_METER 33 +#endif + +typedef enum _ANTENNA_PATH{ + ANTENNA_NONE = 0x00, + ANTENNA_D , + ANTENNA_C , + ANTENNA_CD , + ANTENNA_B , + ANTENNA_BD , + ANTENNA_BC , + ANTENNA_BCD , + ANTENNA_A , + ANTENNA_AD , + ANTENNA_AC , + ANTENNA_ACD , + ANTENNA_AB , + ANTENNA_ABD , + ANTENNA_ABC , + ANTENNA_ABCD +} ANTENNA_PATH; + + +#define MAX_MP_XMITBUF_SZ 2048 +#define NR_MP_XMITFRAME 8 + +struct mp_xmit_frame +{ + _list list; + + struct pkt_attrib attrib; + + _pkt *pkt; + + int frame_tag; + + _adapter *padapter; + +#ifdef CONFIG_USB_HCI + + //insert urb, irp, and irpcnt info below... + //max frag_cnt = 8 + + u8 *mem_addr; + u32 sz[8]; + +#if defined(PLATFORM_OS_XP) || defined(PLATFORM_LINUX) + PURB pxmit_urb[8]; +#endif + +#ifdef PLATFORM_OS_XP + PIRP pxmit_irp[8]; +#endif + + u8 bpending[8]; + sint ac_tag[8]; + sint last[8]; + uint irpcnt; + uint fragcnt; +#endif /* CONFIG_USB_HCI */ + + uint mem[(MAX_MP_XMITBUF_SZ >> 2)]; +}; + +struct mp_wiparam +{ + u32 bcompleted; + u32 act_type; + u32 io_offset; + u32 io_value; +}; + +typedef void(*wi_act_func)(void* padapter); + +#ifdef PLATFORM_WINDOWS +struct mp_wi_cntx +{ + u8 bmpdrv_unload; + + // Work Item + NDIS_WORK_ITEM mp_wi; + NDIS_EVENT mp_wi_evt; + _lock mp_wi_lock; + u8 bmp_wi_progress; + wi_act_func curractfunc; + // Variable needed in each implementation of CurrActFunc. + struct mp_wiparam param; +}; +#endif + +struct mp_tx +{ + u8 stop; + u32 count, sended; + u8 payload; + struct pkt_attrib attrib; + struct tx_desc desc; + u8 *pallocated_buf; + u8 *buf; + u32 buf_size, write_size; + _thread_hdl_ PktTxThread; +}; + +#if defined(CONFIG_RTL8192C) || defined(CONFIG_RTL8192D) || defined(CONFIG_RTL8723A) || defined(CONFIG_RTL8188E) +#ifdef CONFIG_RTL8192C +#include <Hal8192CPhyCfg.h> +#endif +#ifdef CONFIG_RTL8192D +#include <Hal8192DPhyCfg.h> +#endif +#ifdef CONFIG_RTL8723A +#include <Hal8723APhyCfg.h> +#endif +#ifdef CONFIG_RTL8188E +#include <Hal8188EPhyCfg.h> +#endif + +#define MP_MAX_LINES 1000 +#define MP_MAX_LINES_BYTES 256 +#define u1Byte u8 +#define s1Byte s8 +#define u4Byte u32 +#define s4Byte s32 +#define u1Byte u8 +#define pu1Byte u8* + +#define u2Byte u16 +#define pu2Byte u16* + +#define u4Byte u32 +#define pu4Byte u32* + +#define u8Byte u64 +#define pu8Byte u64* + +#define s1Byte s8 +#define ps1Byte s8* + +#define s2Byte s16 +#define ps2Byte s16* + +#define s4Byte s32 +#define ps4Byte s32* + +#define s8Byte s64 +#define ps8Byte s64* + +#define UCHAR u8 +#define USHORT u16 +#define UINT u32 +#define ULONG u32 +#define PULONG u32* + + + +typedef VOID (*MPT_WORK_ITEM_HANDLER)(IN PVOID Adapter); +typedef struct _MPT_CONTEXT +{ + // Indicate if we have started Mass Production Test. + BOOLEAN bMassProdTest; + + // Indicate if the driver is unloading or unloaded. + BOOLEAN bMptDrvUnload; + + _sema MPh2c_Sema; + _timer MPh2c_timeout_timer; +// Event used to sync H2c for BT control + + BOOLEAN MptH2cRspEvent; + BOOLEAN MptBtC2hEvent; + BOOLEAN bMPh2c_timeout; + + /* 8190 PCI does not support NDIS_WORK_ITEM. */ + // Work Item for Mass Production Test. + //NDIS_WORK_ITEM MptWorkItem; +// RT_WORK_ITEM MptWorkItem; + // Event used to sync the case unloading driver and MptWorkItem is still in progress. +// NDIS_EVENT MptWorkItemEvent; + // To protect the following variables. +// NDIS_SPIN_LOCK MptWorkItemSpinLock; + // Indicate a MptWorkItem is scheduled and not yet finished. + BOOLEAN bMptWorkItemInProgress; + // An instance which implements function and context of MptWorkItem. + MPT_WORK_ITEM_HANDLER CurrMptAct; + + // 1=Start, 0=Stop from UI. + ULONG MptTestStart; + // _TEST_MODE, defined in MPT_Req2.h + ULONG MptTestItem; + // Variable needed in each implementation of CurrMptAct. + ULONG MptActType; // Type of action performed in CurrMptAct. + // The Offset of IO operation is depend of MptActType. + ULONG MptIoOffset; + // The Value of IO operation is depend of MptActType. + ULONG MptIoValue; + // The RfPath of IO operation is depend of MptActType. + ULONG MptRfPath; + + WIRELESS_MODE MptWirelessModeToSw; // Wireless mode to switch. + u8 MptChannelToSw; // Channel to switch. + u8 MptInitGainToSet; // Initial gain to set. + //ULONG bMptAntennaA; // TRUE if we want to use antenna A. + ULONG MptBandWidth; // bandwidth to switch. + ULONG MptRateIndex; // rate index. + // Register value kept for Single Carrier Tx test. + u8 btMpCckTxPower; + // Register value kept for Single Carrier Tx test. + u8 btMpOfdmTxPower; + // For MP Tx Power index + u8 TxPwrLevel[2]; // rf-A, rf-B + + // Content of RCR Regsiter for Mass Production Test. + ULONG MptRCR; + // TRUE if we only receive packets with specific pattern. + BOOLEAN bMptFilterPattern; + // Rx OK count, statistics used in Mass Production Test. + ULONG MptRxOkCnt; + // Rx CRC32 error count, statistics used in Mass Production Test. + ULONG MptRxCrcErrCnt; + + BOOLEAN bCckContTx; // TRUE if we are in CCK Continuous Tx test. + BOOLEAN bOfdmContTx; // TRUE if we are in OFDM Continuous Tx test. + BOOLEAN bStartContTx; // TRUE if we have start Continuous Tx test. + // TRUE if we are in Single Carrier Tx test. + BOOLEAN bSingleCarrier; + // TRUE if we are in Carrier Suppression Tx Test. + BOOLEAN bCarrierSuppression; + //TRUE if we are in Single Tone Tx test. + BOOLEAN bSingleTone; + + // ACK counter asked by K.Y.. + BOOLEAN bMptEnableAckCounter; + ULONG MptAckCounter; + + // SD3 Willis For 8192S to save 1T/2T RF table for ACUT Only fro ACUT delete later ~~~! + //s1Byte BufOfLines[2][MAX_LINES_HWCONFIG_TXT][MAX_BYTES_LINE_HWCONFIG_TXT]; + //s1Byte BufOfLines[2][MP_MAX_LINES][MP_MAX_LINES_BYTES]; + //s4Byte RfReadLine[2]; + + u8 APK_bound[2]; //for APK path A/path B + BOOLEAN bMptIndexEven; + + u8 backup0xc50; + u8 backup0xc58; + u8 backup0xc30; + u8 backup0x52_RF_A; + u8 backup0x52_RF_B; + + u1Byte h2cReqNum; + u1Byte c2hBuf[20]; + + u1Byte btInBuf[100]; + ULONG mptOutLen; + u1Byte mptOutBuf[100]; + +}MPT_CONTEXT, *PMPT_CONTEXT; +#endif +//#endif + +//#define RTPRIV_IOCTL_MP ( SIOCIWFIRSTPRIV + 0x17) +enum { + WRITE_REG = 1, + READ_REG, + WRITE_RF, + READ_RF, + MP_START, + MP_STOP, + MP_RATE, + MP_CHANNEL, + MP_BANDWIDTH, + MP_TXPOWER, + MP_ANT_TX, + MP_ANT_RX, + MP_CTX, + MP_QUERY, + MP_ARX, + MP_PSD, + MP_PWRTRK, + MP_THER, + MP_IOCTL, + EFUSE_GET, + EFUSE_SET, + MP_RESET_STATS, + MP_DUMP, + MP_PHYPARA, + MP_SetRFPathSwh, + MP_QueryDrvStats, + MP_SetBT, + CTA_TEST, + MP_DISABLE_BT_COEXIST, + MP_PwrCtlDM, +#ifdef CONFIG_WOWLAN + MP_WOW_ENABLE, +#endif + MP_NULL, +}; + +struct mp_priv +{ + _adapter *papdater; + + //Testing Flag + u32 mode;//0 for normal type packet, 1 for loopback packet (16bytes TXCMD) + + u32 prev_fw_state; + + //OID cmd handler + struct mp_wiparam workparam; +// u8 act_in_progress; + + //Tx Section + u8 TID; + u32 tx_pktcount; + struct mp_tx tx; + + //Rx Section + u32 rx_pktcount; + u32 rx_crcerrpktcount; + u32 rx_pktloss; + + struct recv_stat rxstat; + + //RF/BB relative + u8 channel; + u8 bandwidth; + u8 prime_channel_offset; + u8 txpoweridx; + u8 txpoweridx_b; + u8 rateidx; + u32 preamble; +// u8 modem; + u32 CrystalCap; +// u32 curr_crystalcap; + + u16 antenna_tx; + u16 antenna_rx; +// u8 curr_rfpath; + + u8 check_mp_pkt; + + u8 bSetTxPower; +// uint ForcedDataRate; + u8 mp_dm; + + struct wlan_network mp_network; + NDIS_802_11_MAC_ADDRESS network_macaddr; + +#ifdef PLATFORM_WINDOWS + u32 rx_testcnt; + u32 rx_testcnt1; + u32 rx_testcnt2; + u32 tx_testcnt; + u32 tx_testcnt1; + + struct mp_wi_cntx wi_cntx; + + u8 h2c_result; + u8 h2c_seqnum; + u16 h2c_cmdcode; + u8 h2c_resp_parambuf[512]; + _lock h2c_lock; + _lock wkitm_lock; + u32 h2c_cmdcnt; + NDIS_EVENT h2c_cmd_evt; + NDIS_EVENT c2h_set; + NDIS_EVENT h2c_clr; + NDIS_EVENT cpwm_int; + + NDIS_EVENT scsir_full_evt; + NDIS_EVENT scsiw_empty_evt; +#endif + + u8 *pallocated_mp_xmitframe_buf; + u8 *pmp_xmtframe_buf; + _queue free_mp_xmitqueue; + u32 free_mp_xmitframe_cnt; + + MPT_CONTEXT MptCtx; +}; + +typedef struct _IOCMD_STRUCT_ { + u8 cmdclass; + u16 value; + u8 index; +}IOCMD_STRUCT; + +struct rf_reg_param { + u32 path; + u32 offset; + u32 value; +}; + +struct bb_reg_param { + u32 offset; + u32 value; +}; +//======================================================================= + +#define LOWER _TRUE +#define RAISE _FALSE + +/* Hardware Registers */ +#if 0 +#if 0 +#define IOCMD_CTRL_REG 0x102502C0 +#define IOCMD_DATA_REG 0x102502C4 +#else +#define IOCMD_CTRL_REG 0x10250370 +#define IOCMD_DATA_REG 0x10250374 +#endif + +#define IOCMD_GET_THERMAL_METER 0xFD000028 + +#define IOCMD_CLASS_BB_RF 0xF0 +#define IOCMD_BB_READ_IDX 0x00 +#define IOCMD_BB_WRITE_IDX 0x01 +#define IOCMD_RF_READ_IDX 0x02 +#define IOCMD_RF_WRIT_IDX 0x03 +#endif +#define BB_REG_BASE_ADDR 0x800 + +/* MP variables */ +#if 0 +#define _2MAC_MODE_ 0 +#define _LOOPBOOK_MODE_ 1 +#endif +typedef enum _MP_MODE_ { + MP_OFF, + MP_ON, + MP_ERR, + MP_CONTINUOUS_TX, + MP_SINGLE_CARRIER_TX, + MP_CARRIER_SUPPRISSION_TX, + MP_SINGLE_TONE_TX, + MP_PACKET_TX, + MP_PACKET_RX +} MP_MODE; + + +#define MAX_RF_PATH_NUMS RF_PATH_MAX + + +extern u8 mpdatarate[NumRates]; + +/* MP set force data rate base on the definition. */ +typedef enum _MPT_RATE_INDEX +{ + /* CCK rate. */ + MPT_RATE_1M, /* 0 */ + MPT_RATE_2M, + MPT_RATE_55M, + MPT_RATE_11M, /* 3 */ + + /* OFDM rate. */ + MPT_RATE_6M, /* 4 */ + MPT_RATE_9M, + MPT_RATE_12M, + MPT_RATE_18M, + MPT_RATE_24M, + MPT_RATE_36M, + MPT_RATE_48M, + MPT_RATE_54M, /* 11 */ + + /* HT rate. */ + MPT_RATE_MCS0, /* 12 */ + MPT_RATE_MCS1, + MPT_RATE_MCS2, + MPT_RATE_MCS3, + MPT_RATE_MCS4, + MPT_RATE_MCS5, + MPT_RATE_MCS6, + MPT_RATE_MCS7, /* 19 */ + MPT_RATE_MCS8, + MPT_RATE_MCS9, + MPT_RATE_MCS10, + MPT_RATE_MCS11, + MPT_RATE_MCS12, + MPT_RATE_MCS13, + MPT_RATE_MCS14, + MPT_RATE_MCS15, /* 27 */ + MPT_RATE_LAST +}MPT_RATE_E, *PMPT_RATE_E; + +#if 0 +// Represent Channel Width in HT Capabilities +typedef enum _HT_CHANNEL_WIDTH { + HT_CHANNEL_WIDTH_20 = 0, + HT_CHANNEL_WIDTH_40 = 1, +}HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH; +#endif + +#define MAX_TX_PWR_INDEX_N_MODE 64 // 0x3F + +typedef enum _POWER_MODE_ { + POWER_LOW = 0, + POWER_NORMAL +}POWER_MODE; + + +#define RX_PKT_BROADCAST 1 +#define RX_PKT_DEST_ADDR 2 +#define RX_PKT_PHY_MATCH 3 + +#if 0 +#define RPTMaxCount 0x000FFFFF; + +// parameter 1 : BitMask +// bit 0 : OFDM PPDU +// bit 1 : OFDM False Alarm +// bit 2 : OFDM MPDU OK +// bit 3 : OFDM MPDU Fail +// bit 4 : CCK PPDU +// bit 5 : CCK False Alarm +// bit 6 : CCK MPDU ok +// bit 7 : CCK MPDU fail +// bit 8 : HT PPDU counter +// bit 9 : HT false alarm +// bit 10 : HT MPDU total +// bit 11 : HT MPDU OK +// bit 12 : HT MPDU fail +// bit 15 : RX full drop +typedef enum _RXPHY_BITMASK_ +{ + OFDM_PPDU_BIT = 0, + OFDM_FALSE_BIT, + OFDM_MPDU_OK_BIT, + OFDM_MPDU_FAIL_BIT, + CCK_PPDU_BIT, + CCK_FALSE_BIT, + CCK_MPDU_OK_BIT, + CCK_MPDU_FAIL_BIT, + HT_PPDU_BIT, + HT_FALSE_BIT, + HT_MPDU_BIT, + HT_MPDU_OK_BIT, + HT_MPDU_FAIL_BIT, +} RXPHY_BITMASK; +#endif + +typedef enum _ENCRY_CTRL_STATE_ { + HW_CONTROL, //hw encryption& decryption + SW_CONTROL, //sw encryption& decryption + HW_ENCRY_SW_DECRY, //hw encryption & sw decryption + SW_ENCRY_HW_DECRY //sw encryption & hw decryption +}ENCRY_CTRL_STATE; + +#define Mac_OFDM_OK 0x00000000 +#define Mac_OFDM_Fail 0x10000000 +#define Mac_OFDM_FasleAlarm 0x20000000 +#define Mac_CCK_OK 0x30000000 +#define Mac_CCK_Fail 0x40000000 +#define Mac_CCK_FasleAlarm 0x50000000 +#define Mac_HT_OK 0x60000000 +#define Mac_HT_Fail 0x70000000 +#define Mac_HT_FasleAlarm 0x90000000 +#define Mac_DropPacket 0xA0000000 + +//======================================================================= +//extern struct mp_xmit_frame *alloc_mp_xmitframe(struct mp_priv *pmp_priv); +//extern int free_mp_xmitframe(struct xmit_priv *pxmitpriv, struct mp_xmit_frame *pmp_xmitframe); + +extern s32 init_mp_priv(PADAPTER padapter); +extern void free_mp_priv(struct mp_priv *pmp_priv); +extern s32 MPT_InitializeAdapter(PADAPTER padapter, u8 Channel); +extern void MPT_DeInitAdapter(PADAPTER padapter); +extern s32 mp_start_test(PADAPTER padapter); +extern void mp_stop_test(PADAPTER padapter); + +//======================================================================= +//extern void IQCalibrateBcut(PADAPTER pAdapter); + +//extern u32 bb_reg_read(PADAPTER Adapter, u16 offset); +//extern u8 bb_reg_write(PADAPTER Adapter, u16 offset, u32 value); +//extern u32 rf_reg_read(PADAPTER Adapter, u8 path, u8 offset); +//extern u8 rf_reg_write(PADAPTER Adapter, u8 path, u8 offset, u32 value); + +//extern u32 get_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask); +//extern u8 set_bb_reg(PADAPTER Adapter, u16 offset, u32 bitmask, u32 value); +//extern u32 get_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask); +//extern u8 set_rf_reg(PADAPTER Adapter, u8 path, u8 offset, u32 bitmask, u32 value); + +extern u32 _read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask); +extern void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val); + +extern u32 read_macreg(_adapter *padapter, u32 addr, u32 sz); +extern void write_macreg(_adapter *padapter, u32 addr, u32 val, u32 sz); +extern u32 read_bbreg(_adapter *padapter, u32 addr, u32 bitmask); +extern void write_bbreg(_adapter *padapter, u32 addr, u32 bitmask, u32 val); +extern u32 read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr); +extern void write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 val); + +extern void SetChannel(PADAPTER pAdapter); +extern void SetBandwidth(PADAPTER pAdapter); +extern void SetTxPower(PADAPTER pAdapter); +extern void SetAntennaPathPower(PADAPTER pAdapter); +//extern void SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset); +extern void SetDataRate(PADAPTER pAdapter); + +extern void SetAntenna(PADAPTER pAdapter); + +//extern void SetCrystalCap(PADAPTER pAdapter); + +extern s32 SetThermalMeter(PADAPTER pAdapter, u8 target_ther); +extern void GetThermalMeter(PADAPTER pAdapter, u8 *value); + +extern void SetContinuousTx(PADAPTER pAdapter, u8 bStart); +extern void SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart); +extern void SetSingleToneTx(PADAPTER pAdapter, u8 bStart); +extern void SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart); +extern void PhySetTxPowerLevel(PADAPTER pAdapter); + +extern void fill_txdesc_for_mp(PADAPTER padapter, struct tx_desc *ptxdesc); +extern void SetPacketTx(PADAPTER padapter); +extern void SetPacketRx(PADAPTER pAdapter, u8 bStartRx); + +extern void ResetPhyRxPktCount(PADAPTER pAdapter); +extern u32 GetPhyRxPktReceived(PADAPTER pAdapter); +extern u32 GetPhyRxPktCRC32Error(PADAPTER pAdapter); + +extern s32 SetPowerTracking(PADAPTER padapter, u8 enable); +extern void GetPowerTracking(PADAPTER padapter, u8 *enable); + +extern u32 mp_query_psd(PADAPTER pAdapter, u8 *data); + + +extern void Hal_SetAntenna(PADAPTER pAdapter); +extern void Hal_SetBandwidth(PADAPTER pAdapter); + +extern void Hal_SetTxPower(PADAPTER pAdapter); +extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart); +extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart ); +extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart); +extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart); +extern void Hal_SetBandwidth(PADAPTER pAdapter); + +extern void Hal_SetDataRate(PADAPTER pAdapter); +extern void Hal_SetChannel(PADAPTER pAdapter); +extern void Hal_SetAntennaPathPower(PADAPTER pAdapter); +extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther); +extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable); +extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable); +extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value); +extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter); +extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, BOOLEAN bInCH14); +extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, BOOLEAN beven); +extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower); +extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower); +extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter); +extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter); +extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart); +extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart); +extern void Hal_ProSetCrystalCap (PADAPTER pAdapter , u32 CrystalCapVal); +extern void _rtw_mp_xmit_priv(struct xmit_priv *pxmitpriv); +extern void MP_PHY_SetRFPathSwitch(PADAPTER pAdapter ,BOOLEAN bMain); +extern void MPT_PwrCtlDM(PADAPTER padapter, u32 bstart); + +#endif //_RTW_MP_H_ + |