summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx/wl1271_event.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_event.c')
-rw-r--r--drivers/net/wireless/wl12xx/wl1271_event.c295
1 files changed, 0 insertions, 295 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
deleted file mode 100644
index 7b3f50382963..000000000000
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * This file is part of wl1271
- *
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "wl1271.h"
-#include "wl1271_reg.h"
-#include "wl1271_io.h"
-#include "wl1271_event.h"
-#include "wl1271_ps.h"
-#include "wl1271_scan.h"
-#include "wl12xx_80211.h"
-
-void wl1271_pspoll_work(struct work_struct *work)
-{
- struct delayed_work *dwork;
- struct wl1271 *wl;
-
- dwork = container_of(work, struct delayed_work, work);
- wl = container_of(dwork, struct wl1271, pspoll_work);
-
- wl1271_debug(DEBUG_EVENT, "pspoll work");
-
- mutex_lock(&wl->mutex);
-
- if (unlikely(wl->state == WL1271_STATE_OFF))
- goto out;
-
- if (!test_and_clear_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags))
- goto out;
-
- if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
- goto out;
-
- /*
- * if we end up here, then we were in powersave when the pspoll
- * delivery failure occurred, and no-one changed state since, so
- * we should go back to powersave.
- */
- wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true);
-
-out:
- mutex_unlock(&wl->mutex);
-};
-
-static void wl1271_event_pspoll_delivery_fail(struct wl1271 *wl)
-{
- int delay = wl->conf.conn.ps_poll_recovery_period;
- int ret;
-
- wl->ps_poll_failures++;
- if (wl->ps_poll_failures == 1)
- wl1271_info("AP with dysfunctional ps-poll, "
- "trying to work around it.");
-
- /* force active mode receive data from the AP */
- if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
- ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
- wl->basic_rate, true);
- if (ret < 0)
- return;
- set_bit(WL1271_FLAG_PSPOLL_FAILURE, &wl->flags);
- ieee80211_queue_delayed_work(wl->hw, &wl->pspoll_work,
- msecs_to_jiffies(delay));
- }
-
- /*
- * If already in active mode, lets we should be getting data from
- * the AP right away. If we enter PSM too fast after this, and data
- * remains on the AP, we will get another event like this, and we'll
- * go into active once more.
- */
-}
-
-static int wl1271_event_ps_report(struct wl1271 *wl,
- struct event_mailbox *mbox,
- bool *beacon_loss)
-{
- int ret = 0;
- u32 total_retries = wl->conf.conn.psm_entry_retries;
-
- wl1271_debug(DEBUG_EVENT, "ps_status: 0x%x", mbox->ps_status);
-
- switch (mbox->ps_status) {
- case EVENT_ENTER_POWER_SAVE_FAIL:
- wl1271_debug(DEBUG_PSM, "PSM entry failed");
-
- if (!test_bit(WL1271_FLAG_PSM, &wl->flags)) {
- /* remain in active mode */
- wl->psm_entry_retry = 0;
- break;
- }
-
- if (wl->psm_entry_retry < total_retries) {
- wl->psm_entry_retry++;
- ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
- wl->basic_rate, true);
- } else {
- wl1271_info("No ack to nullfunc from AP.");
- wl->psm_entry_retry = 0;
- *beacon_loss = true;
- }
- break;
- case EVENT_ENTER_POWER_SAVE_SUCCESS:
- wl->psm_entry_retry = 0;
-
- /* enable beacon filtering */
- ret = wl1271_acx_beacon_filter_opt(wl, true);
- if (ret < 0)
- break;
-
- /* enable beacon early termination */
- ret = wl1271_acx_bet_enable(wl, true);
- if (ret < 0)
- break;
-
- /* go to extremely low power mode */
- wl1271_ps_elp_sleep(wl);
- if (ret < 0)
- break;
- break;
- case EVENT_EXIT_POWER_SAVE_FAIL:
- wl1271_debug(DEBUG_PSM, "PSM exit failed");
-
- if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
- wl->psm_entry_retry = 0;
- break;
- }
-
- /* make sure the firmware goes to active mode - the frame to
- be sent next will indicate to the AP, that we are active. */
- ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
- wl->basic_rate, false);
- break;
- case EVENT_EXIT_POWER_SAVE_SUCCESS:
- default:
- break;
- }
-
- return ret;
-}
-
-static void wl1271_event_rssi_trigger(struct wl1271 *wl,
- struct event_mailbox *mbox)
-{
- enum nl80211_cqm_rssi_threshold_event event;
- s8 metric = mbox->rssi_snr_trigger_metric[0];
-
- wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric);
-
- if (metric <= wl->rssi_thold)
- event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW;
- else
- event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH;
-
- if (event != wl->last_rssi_event)
- ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL);
- wl->last_rssi_event = event;
-}
-
-static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
-{
- wl1271_debug(DEBUG_EVENT, "MBOX DUMP:");
- wl1271_debug(DEBUG_EVENT, "\tvector: 0x%x", mbox->events_vector);
- wl1271_debug(DEBUG_EVENT, "\tmask: 0x%x", mbox->events_mask);
-}
-
-static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
-{
- int ret;
- u32 vector;
- bool beacon_loss = false;
-
- wl1271_event_mbox_dump(mbox);
-
- vector = le32_to_cpu(mbox->events_vector);
- vector &= ~(le32_to_cpu(mbox->events_mask));
- wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
-
- if (vector & SCAN_COMPLETE_EVENT_ID) {
- wl1271_debug(DEBUG_EVENT, "status: 0x%x",
- mbox->scheduled_scan_status);
-
- wl1271_scan_stm(wl);
- }
-
- /* disable dynamic PS when requested by the firmware */
- if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
- wl->bss_type == BSS_TYPE_STA_BSS) {
- if (mbox->soft_gemini_sense_info)
- ieee80211_disable_dyn_ps(wl->vif);
- else
- ieee80211_enable_dyn_ps(wl->vif);
- }
-
- /*
- * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
- * filtering) is enabled. Without PSM, the stack will receive all
- * beacons and can detect beacon loss by itself.
- *
- * As there's possibility that the driver disables PSM before receiving
- * BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
- *
- */
- if (vector & BSS_LOSE_EVENT_ID) {
- wl1271_info("Beacon loss detected.");
-
- /* indicate to the stack, that beacons have been lost */
- beacon_loss = true;
- }
-
- if (vector & PS_REPORT_EVENT_ID) {
- wl1271_debug(DEBUG_EVENT, "PS_REPORT_EVENT");
- ret = wl1271_event_ps_report(wl, mbox, &beacon_loss);
- if (ret < 0)
- return ret;
- }
-
- if (vector & PSPOLL_DELIVERY_FAILURE_EVENT_ID)
- wl1271_event_pspoll_delivery_fail(wl);
-
- if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
- wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
- if (wl->vif)
- wl1271_event_rssi_trigger(wl, mbox);
- }
-
- if (wl->vif && beacon_loss)
- ieee80211_connection_loss(wl->vif);
-
- return 0;
-}
-
-int wl1271_event_unmask(struct wl1271 *wl)
-{
- int ret;
-
- ret = wl1271_acx_event_mbox_mask(wl, ~(wl->event_mask));
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-void wl1271_event_mbox_config(struct wl1271 *wl)
-{
- wl->mbox_ptr[0] = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
- wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
-
- wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
- wl->mbox_ptr[0], wl->mbox_ptr[1]);
-}
-
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
-{
- struct event_mailbox mbox;
- int ret;
-
- wl1271_debug(DEBUG_EVENT, "EVENT on mbox %d", mbox_num);
-
- if (mbox_num > 1)
- return -EINVAL;
-
- /* first we read the mbox descriptor */
- wl1271_read(wl, wl->mbox_ptr[mbox_num], &mbox,
- sizeof(struct event_mailbox), false);
-
- /* process the descriptor */
- ret = wl1271_event_process(wl, &mbox);
- if (ret < 0)
- return ret;
-
- /* then we let the firmware know it can go on...*/
- wl1271_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
-
- return 0;
-}