summaryrefslogtreecommitdiff
path: root/drivers/parport
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/parport')
-rw-r--r--drivers/parport/parport_amiga.c36
-rw-r--r--drivers/parport/parport_atari.c9
-rw-r--r--drivers/parport/parport_mfc3.c35
-rw-r--r--drivers/parport/parport_pc.c276
-rw-r--r--drivers/parport/parport_sunbpp.c21
5 files changed, 0 insertions, 377 deletions
diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
index 8bef6d60f88b..ee78e0ee6e05 100644
--- a/drivers/parport/parport_amiga.c
+++ b/drivers/parport/parport_amiga.c
@@ -48,23 +48,6 @@ static unsigned char amiga_read_data(struct parport *p)
return ciaa.prb;
}
-#if 0
-static unsigned char control_pc_to_amiga(unsigned char control)
-{
- unsigned char ret = 0;
-
- if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
- ;
- if (control & PARPORT_CONTROL_INIT) /* INITP */
- /* reset connected to cpu reset pin */;
- if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
- /* Not connected */;
- if (control & PARPORT_CONTROL_STROBE) /* Strobe */
- /* Handled only directly by hardware */;
- return ret;
-}
-#endif
-
static unsigned char control_amiga_to_pc(unsigned char control)
{
return PARPORT_CONTROL_SELECT |
@@ -95,25 +78,6 @@ static unsigned char amiga_frob_control( struct parport *p, unsigned char mask,
return old;
}
-#if 0 /* currently unused */
-static unsigned char status_pc_to_amiga(unsigned char status)
-{
- unsigned char ret = 1;
-
- if (status & PARPORT_STATUS_BUSY) /* Busy */
- ret &= ~1;
- if (status & PARPORT_STATUS_ACK) /* Ack */
- /* handled in hardware */;
- if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
- ret |= 2;
- if (status & PARPORT_STATUS_SELECT) /* select */
- ret |= 4;
- if (status & PARPORT_STATUS_ERROR) /* error */
- /* not connected */;
- return ret;
-}
-#endif
-
static unsigned char status_amiga_to_pc(unsigned char status)
{
unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c
index 0b28fccec03f..7ad59ac68cf6 100644
--- a/drivers/parport/parport_atari.c
+++ b/drivers/parport/parport_atari.c
@@ -130,15 +130,6 @@ parport_atari_data_forward(struct parport *p)
static void
parport_atari_data_reverse(struct parport *p)
{
-#if 0 /* too dangerous, can kill sound chip */
- unsigned long flags;
-
- local_irq_save(flags);
- /* Soundchip port B as input. */
- sound_ym.rd_data_reg_sel = 7;
- sound_ym.wd_data = sound_ym.rd_data_reg_sel & ~0x40;
- local_irq_restore(flags);
-#endif
}
static struct parport_operations parport_atari_ops = {
diff --git a/drivers/parport/parport_mfc3.c b/drivers/parport/parport_mfc3.c
index 1c0c642b3e23..7578d79b3688 100644
--- a/drivers/parport/parport_mfc3.c
+++ b/drivers/parport/parport_mfc3.c
@@ -147,25 +147,6 @@ DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
return old;
}
-#if 0 /* currently unused */
-static unsigned char status_pc_to_mfc3(unsigned char status)
-{
- unsigned char ret = 1;
-
- if (status & PARPORT_STATUS_BUSY) /* Busy */
- ret &= ~1;
- if (status & PARPORT_STATUS_ACK) /* Ack */
- ret |= 8;
- if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
- ret |= 2;
- if (status & PARPORT_STATUS_SELECT) /* select */
- ret |= 4;
- if (status & PARPORT_STATUS_ERROR) /* error */
- ret |= 16;
- return ret;
-}
-#endif
-
static unsigned char status_mfc3_to_pc(unsigned char status)
{
unsigned char ret = PARPORT_STATUS_BUSY;
@@ -184,14 +165,6 @@ static unsigned char status_mfc3_to_pc(unsigned char status)
return ret;
}
-#if 0 /* currently unused */
-static void mfc3_write_status( struct parport *p, unsigned char status)
-{
-DPRINTK(KERN_DEBUG "write_status %02x\n",status);
- pia(p)->ppra = (pia(p)->ppra & 0xe0) | status_pc_to_mfc3(status);
-}
-#endif
-
static unsigned char mfc3_read_status(struct parport *p)
{
unsigned char status;
@@ -201,14 +174,6 @@ DPRINTK(KERN_DEBUG "read_status %02x\n", status);
return status;
}
-#if 0 /* currently unused */
-static void mfc3_change_mode( struct parport *p, int m)
-{
- /* XXX: This port only has one mode, and I am
- not sure about the corresponding PC-style mode*/
-}
-#endif
-
static int use_cnt = 0;
static irqreturn_t mfc3_interrupt(int irq, void *dev_id)
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 937981a3a77f..5abffe58a9d2 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -197,54 +197,6 @@ static int change_mode(struct parport *p, int m)
ECR_WRITE(p, oecr);
return 0;
}
-
-#ifdef CONFIG_PARPORT_1284
-/* Find FIFO lossage; FIFO is reset */
-#if 0
-static int get_fifo_residue(struct parport *p)
-{
- int residue;
- int cnfga;
- const struct parport_pc_private *priv = p->physport->private_data;
-
- /* Adjust for the contents of the FIFO. */
- for (residue = priv->fifo_depth; ; residue--) {
- if (inb(ECONTROL(p)) & 0x2)
- /* Full up. */
- break;
-
- outb(0, FIFO(p));
- }
-
- printk(KERN_DEBUG "%s: %d PWords were left in FIFO\n", p->name,
- residue);
-
- /* Reset the FIFO. */
- frob_set_mode(p, ECR_PS2);
-
- /* Now change to config mode and clean up. FIXME */
- frob_set_mode(p, ECR_CNF);
- cnfga = inb(CONFIGA(p));
- printk(KERN_DEBUG "%s: cnfgA contains 0x%02x\n", p->name, cnfga);
-
- if (!(cnfga & (1<<2))) {
- printk(KERN_DEBUG "%s: Accounting for extra byte\n", p->name);
- residue++;
- }
-
- /* Don't care about partial PWords until support is added for
- * PWord != 1 byte. */
-
- /* Back to PS2 mode. */
- frob_set_mode(p, ECR_PS2);
-
- DPRINTK(KERN_DEBUG
- "*** get_fifo_residue: done residue collecting (ecr = 0x%2.2x)\n",
- inb(ECONTROL(p)));
- return residue;
-}
-#endif /* 0 */
-#endif /* IEEE 1284 support */
#endif /* FIFO support */
/*
@@ -940,234 +892,6 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
return written;
}
-
-#if 0
-static size_t parport_pc_ecp_read_block_pio(struct parport *port,
- void *buf, size_t length,
- int flags)
-{
- size_t left = length;
- size_t fifofull;
- int r;
- const int fifo = FIFO(port);
- const struct parport_pc_private *priv = port->physport->private_data;
- const int fifo_depth = priv->fifo_depth;
- char *bufp = buf;
-
- port = port->physport;
- DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
- dump_parport_state("enter fcn", port);
-
- /* Special case: a timeout of zero means we cannot call schedule().
- * Also if O_NONBLOCK is set then use the default implementation. */
- if (port->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.mode == IEEE1284_MODE_ECPRLE) {
- /* If the peripheral is allowed to send RLE compressed
- * data, it is possible for a byte to expand to 128
- * bytes in the FIFO. */
- fifofull = 128;
- } else {
- fifofull = fifo_depth;
- }
-
- /* If the caller wants less than a full FIFO's worth of data,
- * go through software emulation. Otherwise we may have to throw
- * away data. */
- if (length < fifofull)
- return parport_ieee1284_ecp_read_data(port, buf,
- length, flags);
-
- if (port->ieee1284.phase != IEEE1284_PH_REV_IDLE) {
- /* change to reverse-idle phase (must be in forward-idle) */
-
- /* Event 38: Set nAutoFd low (also make sure nStrobe is high) */
- parport_frob_control(port,
- PARPORT_CONTROL_AUTOFD
- | PARPORT_CONTROL_STROBE,
- PARPORT_CONTROL_AUTOFD);
- parport_pc_data_reverse(port); /* Must be in PS2 mode */
- udelay(5);
- /* Event 39: Set nInit low to initiate bus reversal */
- parport_frob_control(port,
- PARPORT_CONTROL_INIT,
- 0);
- /* Event 40: Wait for nAckReverse (PError) to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
- if (r) {
- printk(KERN_DEBUG "%s: PE timeout Event 40 (%d) "
- "in ecp_read_block_pio\n", port->name, r);
- return 0;
- }
- }
-
- /* Set up ECP FIFO mode.*/
-/* parport_pc_frob_control(port,
- PARPORT_CONTROL_STROBE |
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD); */
- r = change_mode(port, ECR_ECP); /* ECP FIFO */
- if (r)
- printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
- port->name);
-
- port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-
- /* the first byte must be collected manually */
- dump_parport_state("pre 43", port);
- /* Event 43: Wait for nAck to go low */
- r = parport_wait_peripheral(port, PARPORT_STATUS_ACK, 0);
- if (r) {
- /* timed out while reading -- no data */
- printk(KERN_DEBUG "PIO read timed out (initial byte)\n");
- goto out_no_data;
- }
- /* read byte */
- *bufp++ = inb(DATA(port));
- left--;
- dump_parport_state("43-44", port);
- /* Event 44: nAutoFd (HostAck) goes high to acknowledge */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- 0);
- dump_parport_state("pre 45", port);
- /* Event 45: Wait for nAck to go high */
- /* r = parport_wait_peripheral(port, PARPORT_STATUS_ACK,
- PARPORT_STATUS_ACK); */
- dump_parport_state("post 45", port);
- r = 0;
- if (r) {
- /* timed out while waiting for peripheral to respond to ack */
- printk(KERN_DEBUG "ECP PIO read timed out (waiting for nAck)\n");
-
- /* keep hold of the byte we've got already */
- goto out_no_data;
- }
- /* Event 46: nAutoFd (HostAck) goes low to accept more data */
- parport_pc_frob_control(port,
- PARPORT_CONTROL_AUTOFD,
- PARPORT_CONTROL_AUTOFD);
-
-
- dump_parport_state("rev idle", port);
- /* Do the transfer. */
- while (left > fifofull) {
- int ret;
- unsigned long expire = jiffies + port->cad->timeout;
- unsigned char ecrval = inb(ECONTROL(port));
-
- if (need_resched() && time_before(jiffies, expire))
- /* Can't yield the port. */
- schedule();
-
- /* At this point, the FIFO may already be full. In
- * that case ECP is already holding back the
- * peripheral (assuming proper design) with a delayed
- * handshake. Work fast to avoid a peripheral
- * timeout. */
-
- if (ecrval & 0x01) {
- /* FIFO is empty. Wait for interrupt. */
- dump_parport_state("FIFO empty", port);
-
- /* Anyone else waiting for the port? */
- if (port->waithead) {
- printk(KERN_DEBUG "Somebody wants the port\n");
- break;
- }
-
- /* Clear serviceIntr */
- ECR_WRITE(port, ecrval & ~(1<<2));
-false_alarm:
- dump_parport_state("waiting", port);
- ret = parport_wait_event(port, HZ);
- DPRINTK(KERN_DEBUG "parport_wait_event returned %d\n",
- ret);
- if (ret < 0)
- break;
- ret = 0;
- if (!time_before(jiffies, expire)) {
- /* Timed out. */
- dump_parport_state("timeout", port);
- printk(KERN_DEBUG "PIO read timed out\n");
- break;
- }
- ecrval = inb(ECONTROL(port));
- if (!(ecrval & (1<<2))) {
- if (need_resched() &&
- time_before(jiffies, expire)) {
- schedule();
- }
- goto false_alarm;
- }
-
- /* Depending on how the FIFO threshold was
- * set, how long interrupt service took, and
- * how fast the peripheral is, we might be
- * lucky and have a just filled FIFO. */
- continue;
- }
-
- if (ecrval & 0x02) {
- /* FIFO is full. */
- dump_parport_state("FIFO full", port);
- insb(fifo, bufp, fifo_depth);
- bufp += fifo_depth;
- left -= fifo_depth;
- continue;
- }
-
- DPRINTK(KERN_DEBUG
- "*** ecp_read_block_pio: reading one byte from the FIFO\n");
-
- /* FIFO not filled. We will cycle this loop for a while
- * and either the peripheral will fill it faster,
- * tripping a fast empty with insb, or we empty it. */
- *bufp++ = inb(fifo);
- left--;
- }
-
- /* scoop up anything left in the FIFO */
- while (left && !(inb(ECONTROL(port) & 0x01))) {
- *bufp++ = inb(fifo);
- left--;
- }
-
- port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
- dump_parport_state("rev idle2", port);
-
-out_no_data:
-
- /* Go to forward idle mode to shut the peripheral up (event 47). */
- parport_frob_control(port, PARPORT_CONTROL_INIT, PARPORT_CONTROL_INIT);
-
- /* event 49: PError goes high */
- r = parport_wait_peripheral(port,
- PARPORT_STATUS_PAPEROUT,
- PARPORT_STATUS_PAPEROUT);
- if (r) {
- printk(KERN_DEBUG
- "%s: PE timeout FWDIDLE (%d) in ecp_read_block_pio\n",
- port->name, r);
- }
-
- port->ieee1284.phase = IEEE1284_PH_FWD_IDLE;
-
- /* Finish up. */
- {
- int lost = get_fifo_residue(port);
- if (lost)
- /* Shouldn't happen with compliant peripherals. */
- printk(KERN_DEBUG "%s: DATA LOSS (%d bytes)!\n",
- port->name, lost);
- }
-
- dump_parport_state("fwd idle", port);
- return length - left;
-}
-#endif /* 0 */
#endif /* IEEE 1284 support */
#endif /* Allowed to use FIFO/DMA */
diff --git a/drivers/parport/parport_sunbpp.c b/drivers/parport/parport_sunbpp.c
index 9390a534a2b2..983a2d2df659 100644
--- a/drivers/parport/parport_sunbpp.c
+++ b/drivers/parport/parport_sunbpp.c
@@ -82,27 +82,6 @@ static unsigned char parport_sunbpp_read_data(struct parport *p)
return sbus_readb(&regs->p_dr);
}
-#if 0
-static void control_pc_to_sunbpp(struct parport *p, unsigned char status)
-{
- struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;
- unsigned char value_tcr = sbus_readb(&regs->p_tcr);
- unsigned char value_or = sbus_readb(&regs->p_or);
-
- if (status & PARPORT_CONTROL_STROBE)
- value_tcr |= P_TCR_DS;
- if (status & PARPORT_CONTROL_AUTOFD)
- value_or |= P_OR_AFXN;
- if (status & PARPORT_CONTROL_INIT)
- value_or |= P_OR_INIT;
- if (status & PARPORT_CONTROL_SELECT)
- value_or |= P_OR_SLCT_IN;
-
- sbus_writeb(value_or, &regs->p_or);
- sbus_writeb(value_tcr, &regs->p_tcr);
-}
-#endif
-
static unsigned char status_sunbpp_to_pc(struct parport *p)
{
struct bpp_regs __iomem *regs = (struct bpp_regs __iomem *)p->base;