diff options
Diffstat (limited to 'drivers/pci/controller/pci-aardvark.c')
| -rw-r--r-- | drivers/pci/controller/pci-aardvark.c | 62 |
1 files changed, 54 insertions, 8 deletions
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 0a2902569f14..13000d7904c7 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -62,6 +62,7 @@ #define PIO_COMPLETION_STATUS_CRS 2 #define PIO_COMPLETION_STATUS_CA 4 #define PIO_NON_POSTED_REQ BIT(10) +#define PIO_ERR_STATUS BIT(11) #define PIO_ADDR_LS (PIO_BASE_ADDR + 0x8) #define PIO_ADDR_MS (PIO_BASE_ADDR + 0xc) #define PIO_WR_DATA (PIO_BASE_ADDR + 0x10) @@ -363,7 +364,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie) advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG); } -static void advk_pcie_check_pio_status(struct advk_pcie *pcie) +static int advk_pcie_check_pio_status(struct advk_pcie *pcie, u32 *val) { struct device *dev = &pcie->pdev->dev; u32 reg; @@ -374,14 +375,49 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie) status = (reg & PIO_COMPLETION_STATUS_MASK) >> PIO_COMPLETION_STATUS_SHIFT; - if (!status) - return; - + /* + * According to HW spec, the PIO status check sequence as below: + * 1) even if COMPLETION_STATUS(bit9:7) indicates successful, + * it still needs to check Error Status(bit11), only when this bit + * indicates no error happen, the operation is successful. + * 2) value Unsupported Request(1) of COMPLETION_STATUS(bit9:7) only + * means a PIO write error, and for PIO read it is successful with + * a read value of 0xFFFFFFFF. + * 3) value Completion Retry Status(CRS) of COMPLETION_STATUS(bit9:7) + * only means a PIO write error, and for PIO read it is successful + * with a read value of 0xFFFF0001. + * 4) value Completer Abort (CA) of COMPLETION_STATUS(bit9:7) means + * error for both PIO read and PIO write operation. + * 5) other errors are indicated as 'unknown'. + */ switch (status) { + case PIO_COMPLETION_STATUS_OK: + if (reg & PIO_ERR_STATUS) { + strcomp_status = "COMP_ERR"; + break; + } + /* Get the read result */ + if (val) + *val = advk_readl(pcie, PIO_RD_DATA); + /* No error */ + strcomp_status = NULL; + break; case PIO_COMPLETION_STATUS_UR: strcomp_status = "UR"; break; case PIO_COMPLETION_STATUS_CRS: + /* PCIe r4.0, sec 2.3.2, says: + * If CRS Software Visibility is not enabled, the Root Complex + * must re-issue the Configuration Request as a new Request. + * A Root Complex implementation may choose to limit the number + * of Configuration Request/CRS Completion Status loops before + * determining that something is wrong with the target of the + * Request and taking appropriate action, e.g., complete the + * Request to the host as a failed transaction. + * + * To simplify implementation do not re-issue the Configuration + * Request and complete the Request as a failed transaction. + */ strcomp_status = "CRS"; break; case PIO_COMPLETION_STATUS_CA: @@ -392,6 +428,9 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie) break; } + if (!strcomp_status) + return 0; + if (reg & PIO_NON_POSTED_REQ) str_posted = "Non-posted"; else @@ -399,6 +438,8 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie) dev_err(dev, "%s PIO Response Status: %s, %#x @ %#x\n", str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS)); + + return -EFAULT; } static int advk_pcie_wait_pio(struct advk_pcie *pcie) @@ -625,10 +666,13 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn, if (ret < 0) return PCIBIOS_SET_FAILED; - advk_pcie_check_pio_status(pcie); + /* Check PIO status and get the read result */ + ret = advk_pcie_check_pio_status(pcie, val); + if (ret < 0) { + *val = 0xffffffff; + return PCIBIOS_SET_FAILED; + } - /* Get the read result */ - *val = advk_readl(pcie, PIO_RD_DATA); if (size == 1) *val = (*val >> (8 * (where & 3))) & 0xff; else if (size == 2) @@ -692,7 +736,9 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn, if (ret < 0) return PCIBIOS_SET_FAILED; - advk_pcie_check_pio_status(pcie); + ret = advk_pcie_check_pio_status(pcie, NULL); + if (ret < 0) + return PCIBIOS_SET_FAILED; return PCIBIOS_SUCCESSFUL; } |