1 files changed, 291 insertions, 137 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 77cb54a65cde..ab4bf5a4c2f1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -110,7 +110,7 @@ unsigned char pci_bus_max_busnr(struct pci_bus* bus)
 	struct list_head *tmp;
 	unsigned char max, n;
 
-	max = bus->subordinate;
+	max = bus->busn_res.end;
 	list_for_each(tmp, &bus->children) {
 		n = pci_bus_max_busnr(pci_bus_b(tmp));
 		if(n > max)
@@ -136,30 +136,6 @@ void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
 EXPORT_SYMBOL_GPL(pci_ioremap_bar);
 #endif
 
-#if 0
-/**
- * pci_max_busnr - returns maximum PCI bus number
- *
- * Returns the highest PCI bus number present in the system global list of
- * PCI buses.
- */
-unsigned char __devinit
-pci_max_busnr(void)
-{
-	struct pci_bus *bus = NULL;
-	unsigned char max, n;
-
-	max = 0;
-	while ((bus = pci_find_next_bus(bus)) != NULL) {
-		n = pci_bus_max_busnr(bus);
-		if(n > max)
-			max = n;
-	}
-	return max;
-}
-
-#endif  /*  0  */
-
 #define PCI_FIND_CAP_TTL	48
 
 static int __pci_find_next_cap_ttl(struct pci_bus *bus, unsigned int devfn,
@@ -278,6 +254,38 @@ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap)
 }
 
 /**
+ * pci_pcie_cap2 - query for devices' PCI_CAP_ID_EXP v2 capability structure
+ * @dev: PCI device to check
+ *
+ * Like pci_pcie_cap() but also checks that the PCIe capability version is
+ * >= 2.  Note that v1 capability structures could be sparse in that not
+ * all register fields were required.  v2 requires the entire structure to
+ * be present size wise, while still allowing for non-implemented registers
+ * to exist but they must be hardwired to 0.
+ *
+ * Due to the differences in the versions of capability structures, one
+ * must be careful not to try and access non-existant registers that may
+ * exist in early versions - v1 - of Express devices.
+ *
+ * Returns the offset of the PCIe capability structure as long as the
+ * capability version is >= 2; otherwise 0 is returned.
+ */
+static int pci_pcie_cap2(struct pci_dev *dev)
+{
+	u16 flags;
+	int pos;
+
+	pos = pci_pcie_cap(dev);
+	if (pos) {
+		pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+		if ((flags & PCI_EXP_FLAGS_VERS) < 2)
+			pos = 0;
+	}
+
+	return pos;
+}
+
+/**
  * pci_find_ext_capability - Find an extended capability
  * @dev: PCI device to query
  * @cap: capability code
@@ -329,49 +337,6 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap)
 }
 EXPORT_SYMBOL_GPL(pci_find_ext_capability);
 
-/**
- * pci_bus_find_ext_capability - find an extended capability
- * @bus:   the PCI bus to query
- * @devfn: PCI device to query
- * @cap:   capability code
- *
- * Like pci_find_ext_capability() but works for pci devices that do not have a
- * pci_dev structure set up yet.
- *
- * Returns the address of the requested capability structure within the
- * device's PCI configuration space or 0 in case the device does not
- * support it.
- */
-int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn,
-				int cap)
-{
-	u32 header;
-	int ttl;
-	int pos = PCI_CFG_SPACE_SIZE;
-
-	/* minimum 8 bytes per capability */
-	ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8;
-
-	if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
-		return 0;
-	if (header == 0xffffffff || header == 0)
-		return 0;
-
-	while (ttl-- > 0) {
-		if (PCI_EXT_CAP_ID(header) == cap)
-			return pos;
-
-		pos = PCI_EXT_CAP_NEXT(header);
-		if (pos < PCI_CFG_SPACE_SIZE)
-			break;
-
-		if (!pci_bus_read_config_dword(bus, devfn, pos, &header))
-			break;
-	}
-
-	return 0;
-}
-
 static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap)
 {
 	int rc, ttl = PCI_FIND_CAP_TTL;
@@ -622,7 +587,8 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		dev_info(&dev->dev, "Refused to change power state, "
 			"currently in D%d\n", dev->current_state);
 
-	/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
+	/*
+	 * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
 	 * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
 	 * from D3hot to D0 _may_ perform an internal reset, thereby
 	 * going to "D0 Uninitialized" rather than "D0 Initialized".
@@ -654,6 +620,16 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
 	if (dev->pm_cap) {
 		u16 pmcsr;
 
+		/*
+		 * Configuration space is not accessible for device in
+		 * D3cold, so just keep or set D3cold for safety
+		 */
+		if (dev->current_state == PCI_D3cold)
+			return;
+		if (state == PCI_D3cold) {
+			dev->current_state = PCI_D3cold;
+			return;
+		}
 		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
 		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
 	} else {
@@ -662,6 +638,19 @@ void pci_update_current_state(struct pci_dev *dev, pci_power_t state)
 }
 
 /**
+ * pci_power_up - Put the given device into D0 forcibly
+ * @dev: PCI device to power up
+ */
+void pci_power_up(struct pci_dev *dev)
+{
+	if (platform_pci_power_manageable(dev))
+		platform_pci_set_power_state(dev, PCI_D0);
+
+	pci_raw_set_power_state(dev, PCI_D0);
+	pci_update_current_state(dev, PCI_D0);
+}
+
+/**
  * pci_platform_power_transition - Use platform to change device power state
  * @dev: PCI device to handle.
  * @state: State to put the device into.
@@ -694,8 +683,50 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
  */
 static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
 {
-	if (state == PCI_D0)
+	if (state == PCI_D0) {
 		pci_platform_power_transition(dev, PCI_D0);
+		/*
+		 * Mandatory power management transition delays, see
+		 * PCI Express Base Specification Revision 2.0 Section
+		 * 6.6.1: Conventional Reset.  Do not delay for
+		 * devices powered on/off by corresponding bridge,
+		 * because have already delayed for the bridge.
+		 */
+		if (dev->runtime_d3cold) {
+			msleep(dev->d3cold_delay);
+			/*
+			 * When powering on a bridge from D3cold, the
+			 * whole hierarchy may be powered on into
+			 * D0uninitialized state, resume them to give
+			 * them a chance to suspend again
+			 */
+			pci_wakeup_bus(dev->subordinate);
+		}
+	}
+}
+
+/**
+ * __pci_dev_set_current_state - Set current state of a PCI device
+ * @dev: Device to handle
+ * @data: pointer to state to be set
+ */
+static int __pci_dev_set_current_state(struct pci_dev *dev, void *data)
+{
+	pci_power_t state = *(pci_power_t *)data;
+
+	dev->current_state = state;
+	return 0;
+}
+
+/**
+ * __pci_bus_set_current_state - Walk given bus and set current state of devices
+ * @bus: Top bus of the subtree to walk.
+ * @state: state to be set
+ */
+static void __pci_bus_set_current_state(struct pci_bus *bus, pci_power_t state)
+{
+	if (bus)
+		pci_walk_bus(bus, __pci_dev_set_current_state, &state);
 }
 
 /**
@@ -707,8 +738,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
  */
 int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
 {
-	return state >= PCI_D0 ?
-			pci_platform_power_transition(dev, state) : -EINVAL;
+	int ret;
+
+	if (state <= PCI_D0)
+		return -EINVAL;
+	ret = pci_platform_power_transition(dev, state);
+	/* Power off the bridge may power off the whole hierarchy */
+	if (!ret && state == PCI_D3cold)
+		__pci_bus_set_current_state(dev->subordinate, PCI_D3cold);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
 
@@ -732,8 +770,8 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	int error;
 
 	/* bound the state we're entering */
-	if (state > PCI_D3hot)
-		state = PCI_D3hot;
+	if (state > PCI_D3cold)
+		state = PCI_D3cold;
 	else if (state < PCI_D0)
 		state = PCI_D0;
 	else if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
@@ -744,14 +782,23 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 		 */
 		return 0;
 
+	/* Check if we're already there */
+	if (dev->current_state == state)
+		return 0;
+
 	__pci_start_power_transition(dev, state);
 
 	/* This device is quirked not to be put into D3, so
 	   don't put it in D3 */
-	if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
+	if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3))
 		return 0;
 
-	error = pci_raw_set_power_state(dev, state);
+	/*
+	 * To put device in D3cold, we put device into D3hot in native
+	 * way, then put device into D3cold with platform ops
+	 */
+	error = pci_raw_set_power_state(dev, state > PCI_D3hot ?
+					PCI_D3hot : state);
 
 	if (!__pci_complete_power_transition(dev, state))
 		error = 0;
@@ -822,12 +869,6 @@ EXPORT_SYMBOL(pci_choose_state);
 		((flags & PCI_EXP_FLAGS_VERS) > 1 ||	\
 		 (type == PCI_EXP_TYPE_ROOT_PORT ||	\
 		  type == PCI_EXP_TYPE_RC_EC))
-#define pcie_cap_has_devctl2(type, flags)		\
-		((flags & PCI_EXP_FLAGS_VERS) > 1)
-#define pcie_cap_has_lnkctl2(type, flags)		\
-		((flags & PCI_EXP_FLAGS_VERS) > 1)
-#define pcie_cap_has_sltctl2(type, flags)		\
-		((flags & PCI_EXP_FLAGS_VERS) > 1)
 
 static struct pci_cap_saved_state *pci_find_saved_cap(
 	struct pci_dev *pci_dev, char cap)
@@ -870,13 +911,14 @@ static int pci_save_pcie_state(struct pci_dev *dev)
 		pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
 	if (pcie_cap_has_rtctl(dev->pcie_type, flags))
 		pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
-	if (pcie_cap_has_devctl2(dev->pcie_type, flags))
-		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
-	if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
-		pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
-	if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
-		pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
 
+	pos = pci_pcie_cap2(dev);
+	if (!pos)
+		return 0;
+
+	pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+	pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+	pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
 	return 0;
 }
 
@@ -903,12 +945,14 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
 		pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
 	if (pcie_cap_has_rtctl(dev->pcie_type, flags))
 		pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
-	if (pcie_cap_has_devctl2(dev->pcie_type, flags))
-		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
-	if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
-		pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
-	if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
-		pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
+
+	pos = pci_pcie_cap2(dev);
+	if (!pos)
+		return;
+
+	pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+	pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+	pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
 }
 
 
@@ -1349,7 +1393,7 @@ void pcim_pin_device(struct pci_dev *pdev)
  * is the default implementation. Architecture implementations can
  * override this.
  */
-void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
+void __weak pcibios_disable_device (struct pci_dev *dev) {}
 
 static void do_pci_disable_device(struct pci_dev *dev)
 {
@@ -1413,8 +1457,8 @@ pci_disable_device(struct pci_dev *dev)
  * Sets the PCIe reset state for the device. This is the default
  * implementation. Architecture implementations can override this.
  */
-int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev,
-							enum pcie_reset_state state)
+int __weak pcibios_set_pcie_reset_state(struct pci_dev *dev,
+					enum pcie_reset_state state)
 {
 	return -EINVAL;
 }
@@ -1498,6 +1542,28 @@ void pci_pme_wakeup_bus(struct pci_bus *bus)
 }
 
 /**
+ * pci_wakeup - Wake up a PCI device
+ * @dev: Device to handle.
+ * @ign: ignored parameter
+ */
+static int pci_wakeup(struct pci_dev *pci_dev, void *ign)
+{
+	pci_wakeup_event(pci_dev);
+	pm_request_resume(&pci_dev->dev);
+	return 0;
+}
+
+/**
+ * pci_wakeup_bus - Walk given bus and wake up devices on it
+ * @bus: Top bus of the subtree to walk.
+ */
+void pci_wakeup_bus(struct pci_bus *bus)
+{
+	if (bus)
+		pci_walk_bus(bus, pci_wakeup, NULL);
+}
+
+/**
  * pci_pme_capable - check the capability of PCI device to generate PME#
  * @dev: PCI device to handle.
  * @state: PCI state from which device will issue PME#.
@@ -1518,6 +1584,16 @@ static void pci_pme_list_scan(struct work_struct *work)
 	if (!list_empty(&pci_pme_list)) {
 		list_for_each_entry_safe(pme_dev, n, &pci_pme_list, list) {
 			if (pme_dev->dev->pme_poll) {
+				struct pci_dev *bridge;
+
+				bridge = pme_dev->dev->bus->self;
+				/*
+				 * If bridge is in low power state, the
+				 * configuration space of subordinate devices
+				 * may be not accessible
+				 */
+				if (bridge && bridge->current_state != PCI_D0)
+					continue;
 				pci_pme_wakeup(pme_dev->dev, NULL);
 			} else {
 				list_del(&pme_dev->list);
@@ -1744,10 +1820,9 @@ int pci_prepare_to_sleep(struct pci_dev *dev)
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
-	/* Some devices mustn't be in D3 during system sleep */
-	if (target_state == PCI_D3hot &&
-			(dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
-		return 0;
+	/* D3cold during system suspend/hibernate is not supported */
+	if (target_state > PCI_D3hot)
+		target_state = PCI_D3hot;
 
 	pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
 
@@ -1786,12 +1861,16 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
 	if (target_state == PCI_POWER_ERROR)
 		return -EIO;
 
+	dev->runtime_d3cold = target_state == PCI_D3cold;
+
 	__pci_enable_wake(dev, target_state, true, pci_dev_run_wake(dev));
 
 	error = pci_set_power_state(dev, target_state);
 
-	if (error)
+	if (error) {
 		__pci_enable_wake(dev, target_state, true, false);
+		dev->runtime_d3cold = false;
+	}
 
 	return error;
 }
@@ -1861,6 +1940,8 @@ void pci_pm_init(struct pci_dev *dev)
 
 	dev->pm_cap = pm;
 	dev->d3_delay = PCI_PM_D3_WAIT;
+	dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
+	dev->d3cold_allowed = true;
 
 	dev->d1_support = false;
 	dev->d2_support = false;
@@ -1988,7 +2069,7 @@ void pci_enable_ari(struct pci_dev *dev)
 {
 	int pos;
 	u32 cap;
-	u16 flags, ctrl;
+	u16 ctrl;
 	struct pci_dev *bridge;
 
 	if (pcie_ari_disabled || !pci_is_pcie(dev) || dev->devfn)
@@ -1999,18 +2080,14 @@ void pci_enable_ari(struct pci_dev *dev)
 		return;
 
 	bridge = dev->bus->self;
-	if (!bridge || !pci_is_pcie(bridge))
+	if (!bridge)
 		return;
 
-	pos = pci_pcie_cap(bridge);
+	/* ARI is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(bridge);
 	if (!pos)
 		return;
 
-	/* ARI is a PCIe v2 feature */
-	pci_read_config_word(bridge, pos + PCI_EXP_FLAGS, &flags);
-	if ((flags & PCI_EXP_FLAGS_VERS) < 2)
-		return;
-
 	pci_read_config_dword(bridge, pos + PCI_EXP_DEVCAP2, &cap);
 	if (!(cap & PCI_EXP_DEVCAP2_ARI))
 		return;
@@ -2023,7 +2100,7 @@ void pci_enable_ari(struct pci_dev *dev)
 }
 
 /**
- * pci_enable_ido - enable ID-based ordering on a device
+ * pci_enable_ido - enable ID-based Ordering on a device
  * @dev: the PCI device
  * @type: which types of IDO to enable
  *
@@ -2036,7 +2113,8 @@ void pci_enable_ido(struct pci_dev *dev, unsigned long type)
 	int pos;
 	u16 ctrl;
 
-	pos = pci_pcie_cap(dev);
+	/* ID-based Ordering is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(dev);
 	if (!pos)
 		return;
 
@@ -2059,10 +2137,8 @@ void pci_disable_ido(struct pci_dev *dev, unsigned long type)
 	int pos;
 	u16 ctrl;
 
-	if (!pci_is_pcie(dev))
-		return;
-
-	pos = pci_pcie_cap(dev);
+	/* ID-based Ordering is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(dev);
 	if (!pos)
 		return;
 
@@ -2101,10 +2177,8 @@ int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
 	u16 ctrl;
 	int ret;
 
-	if (!pci_is_pcie(dev))
-		return -ENOTSUPP;
-
-	pos = pci_pcie_cap(dev);
+	/* OBFF is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(dev);
 	if (!pos)
 		return -ENOTSUPP;
 
@@ -2113,7 +2187,7 @@ int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type)
 		return -ENOTSUPP; /* no OBFF support at all */
 
 	/* Make sure the topology supports OBFF as well */
-	if (dev->bus) {
+	if (dev->bus->self) {
 		ret = pci_enable_obff(dev->bus->self, type);
 		if (ret)
 			return ret;
@@ -2154,10 +2228,8 @@ void pci_disable_obff(struct pci_dev *dev)
 	int pos;
 	u16 ctrl;
 
-	if (!pci_is_pcie(dev))
-		return;
-
-	pos = pci_pcie_cap(dev);
+	/* OBFF is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(dev);
 	if (!pos)
 		return;
 
@@ -2174,15 +2246,13 @@ EXPORT_SYMBOL(pci_disable_obff);
  * RETURNS:
  * True if @dev supports latency tolerance reporting, false otherwise.
  */
-bool pci_ltr_supported(struct pci_dev *dev)
+static bool pci_ltr_supported(struct pci_dev *dev)
 {
 	int pos;
 	u32 cap;
 
-	if (!pci_is_pcie(dev))
-		return false;
-
-	pos = pci_pcie_cap(dev);
+	/* LTR is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(dev);
 	if (!pos)
 		return false;
 
@@ -2190,7 +2260,6 @@ bool pci_ltr_supported(struct pci_dev *dev)
 
 	return cap & PCI_EXP_DEVCAP2_LTR;
 }
-EXPORT_SYMBOL(pci_ltr_supported);
 
 /**
  * pci_enable_ltr - enable latency tolerance reporting
@@ -2211,7 +2280,8 @@ int pci_enable_ltr(struct pci_dev *dev)
 	if (!pci_ltr_supported(dev))
 		return -ENOTSUPP;
 
-	pos = pci_pcie_cap(dev);
+	/* LTR is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(dev);
 	if (!pos)
 		return -ENOTSUPP;
 
@@ -2220,7 +2290,7 @@ int pci_enable_ltr(struct pci_dev *dev)
 		return -EINVAL;
 
 	/* Enable upstream ports first */
-	if (dev->bus) {
+	if (dev->bus->self) {
 		ret = pci_enable_ltr(dev->bus->self);
 		if (ret)
 			return ret;
@@ -2246,7 +2316,8 @@ void pci_disable_ltr(struct pci_dev *dev)
 	if (!pci_ltr_supported(dev))
 		return;
 
-	pos = pci_pcie_cap(dev);
+	/* LTR is a PCIe cap v2 feature */
+	pos = pci_pcie_cap2(dev);
 	if (!pos)
 		return;
 
@@ -2365,6 +2436,75 @@ void pci_enable_acs(struct pci_dev *dev)
 }
 
 /**
+ * pci_acs_enabled - test ACS against required flags for a given device
+ * @pdev: device to test
+ * @acs_flags: required PCI ACS flags
+ *
+ * Return true if the device supports the provided flags.  Automatically
+ * filters out flags that are not implemented on multifunction devices.
+ */
+bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
+{
+	int pos, ret;
+	u16 ctrl;
+
+	ret = pci_dev_specific_acs_enabled(pdev, acs_flags);
+	if (ret >= 0)
+		return ret > 0;
+
+	if (!pci_is_pcie(pdev))
+		return false;
+
+	/* Filter out flags not applicable to multifunction */
+	if (pdev->multifunction)
+		acs_flags &= (PCI_ACS_RR | PCI_ACS_CR |
+			      PCI_ACS_EC | PCI_ACS_DT);
+
+	if (pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM ||
+	    pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
+	    pdev->multifunction) {
+		pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ACS);
+		if (!pos)
+			return false;
+
+		pci_read_config_word(pdev, pos + PCI_ACS_CTRL, &ctrl);
+		if ((ctrl & acs_flags) != acs_flags)
+			return false;
+	}
+
+	return true;
+}
+
+/**
+ * pci_acs_path_enable - test ACS flags from start to end in a hierarchy
+ * @start: starting downstream device
+ * @end: ending upstream device or NULL to search to the root bus
+ * @acs_flags: required flags
+ *
+ * Walk up a device tree from start to end testing PCI ACS support.  If
+ * any step along the way does not support the required flags, return false.
+ */
+bool pci_acs_path_enabled(struct pci_dev *start,
+			  struct pci_dev *end, u16 acs_flags)
+{
+	struct pci_dev *pdev, *parent = start;
+
+	do {
+		pdev = parent;
+
+		if (!pci_acs_enabled(pdev, acs_flags))
+			return false;
+
+		if (pci_is_root_bus(pdev->bus))
+			return (end == NULL);
+
+		parent = pdev->bus->self;
+	} while (pdev != end);
+
+	return true;
+}
+
+/**
  * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
  * @dev: the PCI device
  * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTD, 4=INTD)
@@ -2671,6 +2811,18 @@ static void __pci_set_master(struct pci_dev *dev, bool enable)
 }
 
 /**
+ * pcibios_setup - process "pci=" kernel boot arguments
+ * @str: string used to pass in "pci=" kernel boot arguments
+ *
+ * Process kernel boot arguments.  This is the default implementation.
+ * Architecture specific implementations can override this as necessary.
+ */
+char * __weak __init pcibios_setup(char *str)
+{
+	return str;
+}
+
+/**
  * pcibios_set_master - enable PCI bus-mastering for device dev
  * @dev: the PCI device to enable
  *
@@ -2881,6 +3033,9 @@ bool pci_intx_mask_supported(struct pci_dev *dev)
 	bool mask_supported = false;
 	u16 orig, new;
 
+	if (dev->broken_intx_masking)
+		return false;
+
 	pci_cfg_access_lock(dev);
 
 	pci_read_config_word(dev, PCI_COMMAND, &orig);
@@ -3400,8 +3555,7 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
 
 	o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
 	if (o != v) {
-		if (v > o && dev->bus &&
-		   (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+		if (v > o && (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
 			return -EIO;
 
 		cmd &= ~PCI_X_CMD_MAX_READ;
@@ -3856,7 +4010,7 @@ static void __devinit pci_no_domains(void)
  * greater than 0xff). This is the default implementation. Architecture
  * implementations can override this.
  */
-int __attribute__ ((weak)) pci_ext_cfg_avail(struct pci_dev *dev)
+int __weak pci_ext_cfg_avail(struct pci_dev *dev)
 {
 	return 1;
 }