summaryrefslogtreecommitdiff
path: root/drivers/platform/x86/intel_mid_thermal.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/platform/x86/intel_mid_thermal.c')
-rw-r--r--drivers/platform/x86/intel_mid_thermal.c576
1 files changed, 576 insertions, 0 deletions
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
new file mode 100644
index 000000000000..c2f4bd8013b5
--- /dev/null
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -0,0 +1,576 @@
+/*
+ * intel_mid_thermal.c - Intel MID platform thermal driver
+ *
+ * Copyright (C) 2011 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * Author: Durgadoss R <durgadoss.r@intel.com>
+ */
+
+#define pr_fmt(fmt) "intel_mid_thermal: " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/thermal.h>
+
+#include <asm/intel_scu_ipc.h>
+
+/* Number of thermal sensors */
+#define MSIC_THERMAL_SENSORS 4
+
+/* ADC1 - thermal registers */
+#define MSIC_THERM_ADC1CNTL1 0x1C0
+#define MSIC_ADC_ENBL 0x10
+#define MSIC_ADC_START 0x08
+
+#define MSIC_THERM_ADC1CNTL3 0x1C2
+#define MSIC_ADCTHERM_ENBL 0x04
+#define MSIC_ADCRRDATA_ENBL 0x05
+#define MSIC_CHANL_MASK_VAL 0x0F
+
+#define MSIC_STOPBIT_MASK 16
+#define MSIC_ADCTHERM_MASK 4
+#define ADC_CHANLS_MAX 15 /* Number of ADC channels */
+#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
+
+/* ADC channel code values */
+#define SKIN_SENSOR0_CODE 0x08
+#define SKIN_SENSOR1_CODE 0x09
+#define SYS_SENSOR_CODE 0x0A
+#define MSIC_DIE_SENSOR_CODE 0x03
+
+#define SKIN_THERM_SENSOR0 0
+#define SKIN_THERM_SENSOR1 1
+#define SYS_THERM_SENSOR2 2
+#define MSIC_DIE_THERM_SENSOR3 3
+
+/* ADC code range */
+#define ADC_MAX 977
+#define ADC_MIN 162
+#define ADC_VAL0C 887
+#define ADC_VAL20C 720
+#define ADC_VAL40C 508
+#define ADC_VAL60C 315
+
+/* ADC base addresses */
+#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */
+#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */
+
+/* MSIC die attributes */
+#define MSIC_DIE_ADC_MIN 488
+#define MSIC_DIE_ADC_MAX 1004
+
+/* This holds the address of the first free ADC channel,
+ * among the 15 channels
+ */
+static int channel_index;
+
+struct platform_info {
+ struct platform_device *pdev;
+ struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
+};
+
+struct thermal_device_info {
+ unsigned int chnl_addr;
+ int direct;
+ /* This holds the current temperature in millidegree celsius */
+ long curr_temp;
+};
+
+/**
+ * to_msic_die_temp - converts adc_val to msic_die temperature
+ * @adc_val: ADC value to be converted
+ *
+ * Can sleep
+ */
+static int to_msic_die_temp(uint16_t adc_val)
+{
+ return (368 * (adc_val) / 1000) - 220;
+}
+
+/**
+ * is_valid_adc - checks whether the adc code is within the defined range
+ * @min: minimum value for the sensor
+ * @max: maximum value for the sensor
+ *
+ * Can sleep
+ */
+static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
+{
+ return (adc_val >= min) && (adc_val <= max);
+}
+
+/**
+ * adc_to_temp - converts the ADC code to temperature in C
+ * @direct: true if ths channel is direct index
+ * @adc_val: the adc_val that needs to be converted
+ * @tp: temperature return value
+ *
+ * Linear approximation is used to covert the skin adc value into temperature.
+ * This technique is used to avoid very long look-up table to get
+ * the appropriate temp value from ADC value.
+ * The adc code vs sensor temp curve is split into five parts
+ * to achieve very close approximate temp value with less than
+ * 0.5C error
+ */
+static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp)
+{
+ int temp;
+
+ /* Direct conversion for die temperature */
+ if (direct) {
+ if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
+ *tp = to_msic_die_temp(adc_val) * 1000;
+ return 0;
+ }
+ return -ERANGE;
+ }
+
+ if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
+ return -ERANGE;
+
+ /* Linear approximation for skin temperature */
+ if (adc_val > ADC_VAL0C)
+ temp = 177 - (adc_val/5);
+ else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
+ temp = 111 - (adc_val/8);
+ else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
+ temp = 92 - (adc_val/10);
+ else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
+ temp = 91 - (adc_val/10);
+ else
+ temp = 112 - (adc_val/6);
+
+ /* Convert temperature in celsius to milli degree celsius */
+ *tp = temp * 1000;
+ return 0;
+}
+
+/**
+ * mid_read_temp - read sensors for temperature
+ * @temp: holds the current temperature for the sensor after reading
+ *
+ * reads the adc_code from the channel and converts it to real
+ * temperature. The converted value is stored in temp.
+ *
+ * Can sleep
+ */
+static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
+{
+ struct thermal_device_info *td_info = tzd->devdata;
+ uint16_t adc_val, addr;
+ uint8_t data = 0;
+ int ret;
+ unsigned long curr_temp;
+
+
+ addr = td_info->chnl_addr;
+
+ /* Enable the msic for conversion before reading */
+ ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
+ if (ret)
+ return ret;
+
+ /* Re-toggle the RRDATARD bit (temporary workaround) */
+ ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
+ if (ret)
+ return ret;
+
+ /* Read the higher bits of data */
+ ret = intel_scu_ipc_ioread8(addr, &data);
+ if (ret)
+ return ret;
+
+ /* Shift bits to accommodate the lower two data bits */
+ adc_val = (data << 2);
+ addr++;
+
+ ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */
+ if (ret)
+ return ret;
+
+ /* Adding lower two bits to the higher bits */
+ data &= 03;
+ adc_val += data;
+
+ /* Convert ADC value to temperature */
+ ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
+ if (ret == 0)
+ *temp = td_info->curr_temp = curr_temp;
+ return ret;
+}
+
+/**
+ * configure_adc - enables/disables the ADC for conversion
+ * @val: zero: disables the ADC non-zero:enables the ADC
+ *
+ * Enable/Disable the ADC depending on the argument
+ *
+ * Can sleep
+ */
+static int configure_adc(int val)
+{
+ int ret;
+ uint8_t data;
+
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+ if (ret)
+ return ret;
+
+ if (val) {
+ /* Enable and start the ADC */
+ data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
+ } else {
+ /* Just stop the ADC */
+ data &= (~MSIC_ADC_START);
+ }
+
+ return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data);
+}
+
+/**
+ * set_up_therm_channel - enable thermal channel for conversion
+ * @base_addr: index of free msic ADC channel
+ *
+ * Enable all the three channels for conversion
+ *
+ * Can sleep
+ */
+static int set_up_therm_channel(u16 base_addr)
+{
+ int ret;
+
+ /* Enable all the sensor channels */
+ ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE);
+ if (ret)
+ return ret;
+
+ ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE);
+ if (ret)
+ return ret;
+
+ ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE);
+ if (ret)
+ return ret;
+
+ /* Since this is the last channel, set the stop bit
+ to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
+ ret = intel_scu_ipc_iowrite8(base_addr + 3,
+ (MSIC_DIE_SENSOR_CODE | 0x10));
+ if (ret)
+ return ret;
+
+ /* Enable ADC and start it */
+ return configure_adc(1);
+}
+
+/**
+ * reset_stopbit - sets the stop bit to 0 on the given channel
+ * @addr: address of the channel
+ *
+ * Can sleep
+ */
+static int reset_stopbit(uint16_t addr)
+{
+ int ret;
+ uint8_t data;
+ ret = intel_scu_ipc_ioread8(addr, &data);
+ if (ret)
+ return ret;
+ /* Set the stop bit to zero */
+ return intel_scu_ipc_iowrite8(addr, (data & 0xEF));
+}
+
+/**
+ * find_free_channel - finds an empty channel for conversion
+ *
+ * If the ADC is not enabled then start using 0th channel
+ * itself. Otherwise find an empty channel by looking for a
+ * channel in which the stopbit is set to 1. returns the index
+ * of the first free channel if succeeds or an error code.
+ *
+ * Context: can sleep
+ *
+ * FIXME: Ultimately the channel allocator will move into the intel_scu_ipc
+ * code.
+ */
+static int find_free_channel(void)
+{
+ int ret;
+ int i;
+ uint8_t data;
+
+ /* check whether ADC is enabled */
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data);
+ if (ret)
+ return ret;
+
+ if ((data & MSIC_ADC_ENBL) == 0)
+ return 0;
+
+ /* ADC is already enabled; Looking for an empty channel */
+ for (i = 0; i < ADC_CHANLS_MAX; i++) {
+ ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data);
+ if (ret)
+ return ret;
+
+ if (data & MSIC_STOPBIT_MASK) {
+ ret = i;
+ break;
+ }
+ }
+ return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
+}
+
+/**
+ * mid_initialize_adc - initializing the ADC
+ * @dev: our device structure
+ *
+ * Initialize the ADC for reading thermistor values. Can sleep.
+ */
+static int mid_initialize_adc(struct device *dev)
+{
+ u8 data;
+ u16 base_addr;
+ int ret;
+
+ /*
+ * Ensure that adctherm is disabled before we
+ * initialize the ADC
+ */
+ ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data);
+ if (ret)
+ return ret;
+
+ if (data & MSIC_ADCTHERM_MASK)
+ dev_warn(dev, "ADCTHERM already set");
+
+ /* Index of the first channel in which the stop bit is set */
+ channel_index = find_free_channel();
+ if (channel_index < 0) {
+ dev_err(dev, "No free ADC channels");
+ return channel_index;
+ }
+
+ base_addr = ADC_CHNL_START_ADDR + channel_index;
+
+ if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
+ /* Reset stop bit for channels other than 0 and 12 */
+ ret = reset_stopbit(base_addr);
+ if (ret)
+ return ret;
+
+ /* Index of the first free channel */
+ base_addr++;
+ channel_index++;
+ }
+
+ ret = set_up_therm_channel(base_addr);
+ if (ret) {
+ dev_err(dev, "unable to enable ADC");
+ return ret;
+ }
+ dev_dbg(dev, "ADC initialization successful");
+ return ret;
+}
+
+/**
+ * initialize_sensor - sets default temp and timer ranges
+ * @index: index of the sensor
+ *
+ * Context: can sleep
+ */
+static struct thermal_device_info *initialize_sensor(int index)
+{
+ struct thermal_device_info *td_info =
+ kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
+
+ if (!td_info)
+ return NULL;
+
+ /* Set the base addr of the channel for this sensor */
+ td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
+ /* Sensor 3 is direct conversion */
+ if (index == 3)
+ td_info->direct = 1;
+ return td_info;
+}
+
+/**
+ * mid_thermal_resume - resume routine
+ * @pdev: platform device structure
+ *
+ * mid thermal resume: re-initializes the adc. Can sleep.
+ */
+static int mid_thermal_resume(struct platform_device *pdev)
+{
+ return mid_initialize_adc(&pdev->dev);
+}
+
+/**
+ * mid_thermal_suspend - suspend routine
+ * @pdev: platform device structure
+ *
+ * mid thermal suspend implements the suspend functionality
+ * by stopping the ADC. Can sleep.
+ */
+static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+ /*
+ * This just stops the ADC and does not disable it.
+ * temporary workaround until we have a generic ADC driver.
+ * If 0 is passed, it disables the ADC.
+ */
+ return configure_adc(0);
+}
+
+/**
+ * read_curr_temp - reads the current temperature and stores in temp
+ * @temp: holds the current temperature value after reading
+ *
+ * Can sleep
+ */
+static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp)
+{
+ WARN_ON(tzd == NULL);
+ return mid_read_temp(tzd, temp);
+}
+
+/* Can't be const */
+static struct thermal_zone_device_ops tzd_ops = {
+ .get_temp = read_curr_temp,
+};
+
+
+/**
+ * mid_thermal_probe - mfld thermal initialize
+ * @pdev: platform device structure
+ *
+ * mid thermal probe initializes the hardware and registers
+ * all the sensors with the generic thermal framework. Can sleep.
+ */
+static int mid_thermal_probe(struct platform_device *pdev)
+{
+ static char *name[MSIC_THERMAL_SENSORS] = {
+ "skin0", "skin1", "sys", "msicdie"
+ };
+
+ int ret;
+ int i;
+ struct platform_info *pinfo;
+
+ pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL);
+ if (!pinfo)
+ return -ENOMEM;
+
+ /* Initializing the hardware */
+ ret = mid_initialize_adc(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "ADC init failed");
+ kfree(pinfo);
+ return ret;
+ }
+
+ /* Register each sensor with the generic thermal framework*/
+ for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
+ pinfo->tzd[i] = thermal_zone_device_register(name[i],
+ 0, initialize_sensor(i),
+ &tzd_ops, 0, 0, 0, 0);
+ if (IS_ERR(pinfo->tzd[i]))
+ goto reg_fail;
+ }
+
+ pinfo->pdev = pdev;
+ platform_set_drvdata(pdev, pinfo);
+ return 0;
+
+reg_fail:
+ ret = PTR_ERR(pinfo->tzd[i]);
+ while (--i >= 0)
+ thermal_zone_device_unregister(pinfo->tzd[i]);
+ configure_adc(0);
+ kfree(pinfo);
+ return ret;
+}
+
+/**
+ * mid_thermal_remove - mfld thermal finalize
+ * @dev: platform device structure
+ *
+ * MLFD thermal remove unregisters all the sensors from the generic
+ * thermal framework. Can sleep.
+ */
+static int mid_thermal_remove(struct platform_device *pdev)
+{
+ int i;
+ struct platform_info *pinfo = platform_get_drvdata(pdev);
+
+ for (i = 0; i < MSIC_THERMAL_SENSORS; i++)
+ thermal_zone_device_unregister(pinfo->tzd[i]);
+
+ platform_set_drvdata(pdev, NULL);
+
+ /* Stop the ADC */
+ return configure_adc(0);
+}
+
+/*********************************************************************
+ * Driver initialisation and finalization
+ *********************************************************************/
+
+#define DRIVER_NAME "msic_sensor"
+
+static const struct platform_device_id therm_id_table[] = {
+ { DRIVER_NAME, 1 },
+ { }
+};
+
+static struct platform_driver mid_thermal_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = mid_thermal_probe,
+ .suspend = mid_thermal_suspend,
+ .resume = mid_thermal_resume,
+ .remove = __devexit_p(mid_thermal_remove),
+ .id_table = therm_id_table,
+};
+
+static int __init mid_thermal_module_init(void)
+{
+ return platform_driver_register(&mid_thermal_driver);
+}
+
+static void __exit mid_thermal_module_exit(void)
+{
+ platform_driver_unregister(&mid_thermal_driver);
+}
+
+module_init(mid_thermal_module_init);
+module_exit(mid_thermal_module_exit);
+
+MODULE_AUTHOR("Durgadoss R <durgadoss.r@intel.com>");
+MODULE_DESCRIPTION("Intel Medfield Platform Thermal Driver");
+MODULE_LICENSE("GPL");