summaryrefslogtreecommitdiff
path: root/drivers/rtc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rtc')
-rw-r--r--drivers/rtc/rtc-pxa.c4
-rw-r--r--drivers/rtc/rtc-sa1100.c82
-rw-r--r--drivers/rtc/rtc-sa1100.h4
3 files changed, 63 insertions, 27 deletions
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index fb9b3a7d2266..fe4985b54608 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -356,6 +356,10 @@ static int __init pxa_rtc_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ sa1100_rtc->rcnr = pxa_rtc->base + 0x0;
+ sa1100_rtc->rtsr = pxa_rtc->base + 0x8;
+ sa1100_rtc->rtar = pxa_rtc->base + 0x4;
+ sa1100_rtc->rttr = pxa_rtc->base + 0xc;
ret = sa1100_rtc_init(pdev, sa1100_rtc);
if (!ret) {
dev_err(dev, "Unable to init SA1100 RTC sub-device\n");
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index abc19abd5f2d..c2187bf6c7e4 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -35,12 +35,10 @@
#include <linux/bitops.h>
#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
-#include <mach/regs-rtc.h>
-#endif
+#define RTSR_HZE BIT(3) /* HZ interrupt enable */
+#define RTSR_ALE BIT(2) /* RTC alarm interrupt enable */
+#define RTSR_HZ BIT(1) /* HZ rising-edge detected */
+#define RTSR_AL BIT(0) /* RTC alarm detected */
#include "rtc-sa1100.h"
@@ -58,16 +56,16 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
spin_lock(&info->lock);
- rtsr = RTSR;
+ rtsr = readl_relaxed(info->rtsr);
/* clear interrupt sources */
- RTSR = 0;
+ writel_relaxed(0, info->rtsr);
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_probe(). */
if (rtsr & (RTSR_ALE | RTSR_HZE)) {
/* This is the original code, before there was the if test
* above. This code does not clear interrupts that were not
* enabled. */
- RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+ writel_relaxed((RTSR_AL | RTSR_HZ) & (rtsr >> 2), info->rtsr);
} else {
/* For some reason, it is possible to enter this routine
* without interruptions enabled, it has been tested with
@@ -76,13 +74,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
* This situation leads to an infinite "loop" of interrupt
* routine calling and as a result the processor seems to
* lock on its first call to open(). */
- RTSR = RTSR_AL | RTSR_HZ;
+ writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
}
/* clear alarm interrupt if it has occurred */
if (rtsr & RTSR_AL)
rtsr &= ~RTSR_ALE;
- RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
+ writel_relaxed(rtsr & (RTSR_ALE | RTSR_HZE), info->rtsr);
/* update irq data & counter */
if (rtsr & RTSR_AL)
@@ -130,7 +128,7 @@ static void sa1100_rtc_release(struct device *dev)
struct sa1100_rtc *info = dev_get_drvdata(dev);
spin_lock_irq(&info->lock);
- RTSR = 0;
+ writel_relaxed(0, info->rtsr);
spin_unlock_irq(&info->lock);
free_irq(info->irq_alarm, dev);
@@ -139,39 +137,46 @@ static void sa1100_rtc_release(struct device *dev)
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
+ u32 rtsr;
struct sa1100_rtc *info = dev_get_drvdata(dev);
spin_lock_irq(&info->lock);
+ rtsr = readl_relaxed(info->rtsr);
if (enabled)
- RTSR |= RTSR_ALE;
+ rtsr |= RTSR_ALE;
else
- RTSR &= ~RTSR_ALE;
+ rtsr &= ~RTSR_ALE;
+ writel_relaxed(rtsr, info->rtsr);
spin_unlock_irq(&info->lock);
return 0;
}
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- rtc_time_to_tm(RCNR, tm);
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+ rtc_time_to_tm(readl_relaxed(info->rcnr), tm);
return 0;
}
static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
unsigned long time;
int ret;
ret = rtc_tm_to_time(tm, &time);
if (ret == 0)
- RCNR = time;
+ writel_relaxed(time, info->rcnr);
return ret;
}
static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
u32 rtsr;
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
- rtsr = RTSR;
+ rtsr = readl_relaxed(info->rtsr);
alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
return 0;
@@ -187,12 +192,13 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
ret = rtc_tm_to_time(&alrm->time, &time);
if (ret != 0)
goto out;
- RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
- RTAR = time;
+ writel_relaxed(readl_relaxed(info->rtsr) &
+ (RTSR_HZE | RTSR_ALE | RTSR_AL), info->rtsr);
+ writel_relaxed(time, info->rtar);
if (alrm->enabled)
- RTSR |= RTSR_ALE;
+ writel_relaxed(readl_relaxed(info->rtsr) | RTSR_ALE, info->rtsr);
else
- RTSR &= ~RTSR_ALE;
+ writel_relaxed(readl_relaxed(info->rtsr) & ~RTSR_ALE, info->rtsr);
out:
spin_unlock_irq(&info->lock);
@@ -201,8 +207,10 @@ out:
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
- seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
- seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
+ struct sa1100_rtc *info = dev_get_drvdata(dev);
+
+ seq_printf(seq, "trim/divider\t\t: 0x%08x\n", readl_relaxed(info->rttr));
+ seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", readl_relaxed(info->rtsr));
return 0;
}
@@ -241,12 +249,12 @@ int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info)
* If the clock divider is uninitialized then reset it to the
* default value to get the 1Hz clock.
*/
- if (RTTR == 0) {
- RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+ if (readl_relaxed(info->rttr) == 0) {
+ writel_relaxed(RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16), info->rttr);
dev_warn(&pdev->dev, "warning: "
"initializing default clock divider/trim value\n");
/* The current RTC value probably doesn't make sense either */
- RCNR = 0;
+ writel_relaxed(0, info->rcnr);
}
rtc = devm_rtc_device_register(&pdev->dev, pdev->name, &sa1100_rtc_ops,
@@ -279,7 +287,7 @@ int sa1100_rtc_init(struct platform_device *pdev, struct sa1100_rtc *info)
*
* Notice that clearing bit 1 and 0 is accomplished by writting ONES to
* the corresponding bits in RTSR. */
- RTSR = RTSR_AL | RTSR_HZ;
+ writel_relaxed(RTSR_AL | RTSR_HZ, info->rtsr);
return 0;
}
@@ -288,6 +296,8 @@ EXPORT_SYMBOL_GPL(sa1100_rtc_init);
static int sa1100_rtc_probe(struct platform_device *pdev)
{
struct sa1100_rtc *info;
+ struct resource *iores;
+ void __iomem *base;
int irq_1hz, irq_alarm;
irq_1hz = platform_get_irq_byname(pdev, "rtc 1Hz");
@@ -301,6 +311,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
info->irq_1hz = irq_1hz;
info->irq_alarm = irq_alarm;
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, iores);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ if (IS_ENABLED(CONFIG_ARCH_SA1100) ||
+ of_device_is_compatible(pdev->dev.of_node, "mrvl,sa1100-rtc")) {
+ info->rcnr = base + 0x04;
+ info->rtsr = base + 0x10;
+ info->rtar = base + 0x00;
+ info->rttr = base + 0x08;
+ } else {
+ info->rcnr = base + 0x0;
+ info->rtsr = base + 0x8;
+ info->rtar = base + 0x4;
+ info->rttr = base + 0xc;
+ }
+
platform_set_drvdata(pdev, info);
device_init_wakeup(&pdev->dev, 1);
diff --git a/drivers/rtc/rtc-sa1100.h b/drivers/rtc/rtc-sa1100.h
index 665d054740a1..2c79c0c57822 100644
--- a/drivers/rtc/rtc-sa1100.h
+++ b/drivers/rtc/rtc-sa1100.h
@@ -8,6 +8,10 @@ struct platform_device;
struct sa1100_rtc {
spinlock_t lock;
+ void __iomem *rcnr;
+ void __iomem *rtar;
+ void __iomem *rtsr;
+ void __iomem *rttr;
int irq_1hz;
int irq_alarm;
struct rtc_device *rtc;
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-28 09:08:03 +0000