summaryrefslogtreecommitdiff
path: root/drivers/scsi/aic7xxx_old/aic7xxx_proc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aic7xxx_old/aic7xxx_proc.c')
-rw-r--r--drivers/scsi/aic7xxx_old/aic7xxx_proc.c221
1 files changed, 59 insertions, 162 deletions
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx_proc.c b/drivers/scsi/aic7xxx_old/aic7xxx_proc.c
index b07e4f04fd00..976f45ccf2cf 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx_proc.c
+++ b/drivers/scsi/aic7xxx_old/aic7xxx_proc.c
@@ -30,62 +30,23 @@
*-M*************************************************************************/
-#define BLS (&aic7xxx_buffer[size])
#define HDRB \
" 0 - 4K 4 - 16K 16 - 64K 64 - 256K 256K - 1M 1M+"
-#ifdef PROC_DEBUG
-extern int vsprintf(char *, const char *, va_list);
-
-static void
-proc_debug(const char *fmt, ...)
-{
- va_list ap;
- char buf[256];
-
- va_start(ap, fmt);
- vsprintf(buf, fmt, ap);
- printk(buf);
- va_end(ap);
-}
-#else /* PROC_DEBUG */
-# define proc_debug(fmt, args...)
-#endif /* PROC_DEBUG */
-
-static int aic7xxx_buffer_size = 0;
-static char *aic7xxx_buffer = NULL;
-
/*+F*************************************************************************
* Function:
- * aic7xxx_set_info
- *
- * Description:
- * Set parameters for the driver from the /proc filesystem.
- *-F*************************************************************************/
-static int
-aic7xxx_set_info(char *buffer, int length, struct Scsi_Host *HBAptr)
-{
- proc_debug("aic7xxx_set_info(): %s\n", buffer);
- return (-ENOSYS); /* Currently this is a no-op */
-}
-
-
-/*+F*************************************************************************
- * Function:
- * aic7xxx_proc_info
+ * aic7xxx_show_info
*
* Description:
* Return information to handle /proc support for the driver.
*-F*************************************************************************/
int
-aic7xxx_proc_info ( struct Scsi_Host *HBAptr, char *buffer, char **start, off_t offset, int length,
- int inout)
+aic7xxx_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
{
struct aic7xxx_host *p;
struct aic_dev_data *aic_dev;
struct scsi_device *sdptr;
- int size = 0;
unsigned char i;
unsigned char tindex;
@@ -94,66 +55,21 @@ aic7xxx_proc_info ( struct Scsi_Host *HBAptr, char *buffer, char **start, off_t
if (!p)
{
- size += sprintf(buffer, "Can't find adapter for host number %d\n", HBAptr->host_no);
- if (size > length)
- {
- return (size);
- }
- else
- {
- return (length);
- }
- }
-
- if (inout == TRUE) /* Has data been written to the file? */
- {
- return (aic7xxx_set_info(buffer, length, HBAptr));
+ seq_printf(m, "Can't find adapter for host number %d\n", HBAptr->host_no);
+ return 0;
}
p = (struct aic7xxx_host *) HBAptr->hostdata;
- /*
- * It takes roughly 1K of space to hold all relevant card info, not
- * counting any proc stats, so we start out with a 1.5k buffer size and
- * if proc_stats is defined, then we sweep the stats structure to see
- * how many drives we will be printing out for and add 384 bytes per
- * device with active stats.
- *
- * Hmmmm...that 1.5k seems to keep growing as items get added so they
- * can be easily viewed for debugging purposes. So, we bumped that
- * 1.5k to 4k so we can quit having to bump it all the time.
- */
-
- size = 4096;
- list_for_each_entry(aic_dev, &p->aic_devs, list)
- size += 512;
- if (aic7xxx_buffer_size != size)
- {
- if (aic7xxx_buffer != NULL)
- {
- kfree(aic7xxx_buffer);
- aic7xxx_buffer_size = 0;
- }
- aic7xxx_buffer = kmalloc(size, GFP_KERNEL);
- }
- if (aic7xxx_buffer == NULL)
- {
- size = sprintf(buffer, "AIC7xxx - kmalloc error at line %d\n",
- __LINE__);
- return size;
- }
- aic7xxx_buffer_size = size;
-
- size = 0;
- size += sprintf(BLS, "Adaptec AIC7xxx driver version: ");
- size += sprintf(BLS, "%s/", AIC7XXX_C_VERSION);
- size += sprintf(BLS, "%s", AIC7XXX_H_VERSION);
- size += sprintf(BLS, "\n");
- size += sprintf(BLS, "Adapter Configuration:\n");
- size += sprintf(BLS, " SCSI Adapter: %s\n",
+ seq_printf(m, "Adaptec AIC7xxx driver version: ");
+ seq_printf(m, "%s/", AIC7XXX_C_VERSION);
+ seq_printf(m, "%s", AIC7XXX_H_VERSION);
+ seq_printf(m, "\n");
+ seq_printf(m, "Adapter Configuration:\n");
+ seq_printf(m, " SCSI Adapter: %s\n",
board_names[p->board_name_index]);
if (p->flags & AHC_TWIN)
- size += sprintf(BLS, " Twin Channel Controller ");
+ seq_printf(m, " Twin Channel Controller ");
else
{
char *channel = "";
@@ -184,86 +100,86 @@ aic7xxx_proc_info ( struct Scsi_Host *HBAptr, char *buffer, char **start, off_t
ultra = "Ultra-2 LVD/SE ";
else if (p->features & AHC_ULTRA)
ultra = "Ultra ";
- size += sprintf(BLS, " %s%sController%s ",
+ seq_printf(m, " %s%sController%s ",
ultra, wide, channel);
}
switch(p->chip & ~AHC_CHIPID_MASK)
{
case AHC_VL:
- size += sprintf(BLS, "at VLB slot %d\n", p->pci_device_fn);
+ seq_printf(m, "at VLB slot %d\n", p->pci_device_fn);
break;
case AHC_EISA:
- size += sprintf(BLS, "at EISA slot %d\n", p->pci_device_fn);
+ seq_printf(m, "at EISA slot %d\n", p->pci_device_fn);
break;
default:
- size += sprintf(BLS, "at PCI %d/%d/%d\n", p->pci_bus,
+ seq_printf(m, "at PCI %d/%d/%d\n", p->pci_bus,
PCI_SLOT(p->pci_device_fn), PCI_FUNC(p->pci_device_fn));
break;
}
if( !(p->maddr) )
{
- size += sprintf(BLS, " Programmed I/O Base: %lx\n", p->base);
+ seq_printf(m, " Programmed I/O Base: %lx\n", p->base);
}
else
{
- size += sprintf(BLS, " PCI MMAPed I/O Base: 0x%lx\n", p->mbase);
+ seq_printf(m, " PCI MMAPed I/O Base: 0x%lx\n", p->mbase);
}
if( (p->chip & (AHC_VL | AHC_EISA)) )
{
- size += sprintf(BLS, " BIOS Memory Address: 0x%08x\n", p->bios_address);
+ seq_printf(m, " BIOS Memory Address: 0x%08x\n", p->bios_address);
}
- size += sprintf(BLS, " Adapter SEEPROM Config: %s\n",
+ seq_printf(m, " Adapter SEEPROM Config: %s\n",
(p->flags & AHC_SEEPROM_FOUND) ? "SEEPROM found and used." :
((p->flags & AHC_USEDEFAULTS) ? "SEEPROM not found, using defaults." :
"SEEPROM not found, using leftover BIOS values.") );
- size += sprintf(BLS, " Adaptec SCSI BIOS: %s\n",
+ seq_printf(m, " Adaptec SCSI BIOS: %s\n",
(p->flags & AHC_BIOS_ENABLED) ? "Enabled" : "Disabled");
- size += sprintf(BLS, " IRQ: %d\n", HBAptr->irq);
- size += sprintf(BLS, " SCBs: Active %d, Max Active %d,\n",
+ seq_printf(m, " IRQ: %d\n", HBAptr->irq);
+ seq_printf(m, " SCBs: Active %d, Max Active %d,\n",
p->activescbs, p->max_activescbs);
- size += sprintf(BLS, " Allocated %d, HW %d, "
+ seq_printf(m, " Allocated %d, HW %d, "
"Page %d\n", p->scb_data->numscbs, p->scb_data->maxhscbs,
p->scb_data->maxscbs);
if (p->flags & AHC_EXTERNAL_SRAM)
- size += sprintf(BLS, " Using External SCB SRAM\n");
- size += sprintf(BLS, " Interrupts: %ld", p->isr_count);
+ seq_printf(m, " Using External SCB SRAM\n");
+ seq_printf(m, " Interrupts: %ld", p->isr_count);
if (p->chip & AHC_EISA)
{
- size += sprintf(BLS, " %s\n",
+ seq_printf(m, " %s\n",
(p->pause & IRQMS) ? "(Level Sensitive)" : "(Edge Triggered)");
}
else
{
- size += sprintf(BLS, "\n");
+ seq_printf(m, "\n");
}
- size += sprintf(BLS, " BIOS Control Word: 0x%04x\n",
+ seq_printf(m, " BIOS Control Word: 0x%04x\n",
p->bios_control);
- size += sprintf(BLS, " Adapter Control Word: 0x%04x\n",
+ seq_printf(m, " Adapter Control Word: 0x%04x\n",
p->adapter_control);
- size += sprintf(BLS, " Extended Translation: %sabled\n",
+ seq_printf(m, " Extended Translation: %sabled\n",
(p->flags & AHC_EXTEND_TRANS_A) ? "En" : "Dis");
- size += sprintf(BLS, "Disconnect Enable Flags: 0x%04x\n", p->discenable);
+ seq_printf(m, "Disconnect Enable Flags: 0x%04x\n", p->discenable);
if (p->features & (AHC_ULTRA | AHC_ULTRA2))
{
- size += sprintf(BLS, " Ultra Enable Flags: 0x%04x\n", p->ultraenb);
+ seq_printf(m, " Ultra Enable Flags: 0x%04x\n", p->ultraenb);
}
- size += sprintf(BLS, "Default Tag Queue Depth: %d\n", aic7xxx_default_queue_depth);
- size += sprintf(BLS, " Tagged Queue By Device array for aic7xxx host "
+ seq_printf(m, "Default Tag Queue Depth: %d\n", aic7xxx_default_queue_depth);
+ seq_printf(m, " Tagged Queue By Device array for aic7xxx host "
"instance %d:\n", p->instance);
- size += sprintf(BLS, " {");
+ seq_printf(m, " {");
for(i=0; i < (MAX_TARGETS - 1); i++)
- size += sprintf(BLS, "%d,",aic7xxx_tag_info[p->instance].tag_commands[i]);
- size += sprintf(BLS, "%d}\n",aic7xxx_tag_info[p->instance].tag_commands[i]);
+ seq_printf(m, "%d,",aic7xxx_tag_info[p->instance].tag_commands[i]);
+ seq_printf(m, "%d}\n",aic7xxx_tag_info[p->instance].tag_commands[i]);
- size += sprintf(BLS, "\n");
- size += sprintf(BLS, "Statistics:\n\n");
+ seq_printf(m, "\n");
+ seq_printf(m, "Statistics:\n\n");
list_for_each_entry(aic_dev, &p->aic_devs, list)
{
sdptr = aic_dev->SDptr;
tindex = sdptr->channel << 3 | sdptr->id;
- size += sprintf(BLS, "(scsi%d:%d:%d:%d)\n",
+ seq_printf(m, "(scsi%d:%d:%d:%d)\n",
p->host_no, sdptr->channel, sdptr->id, sdptr->lun);
- size += sprintf(BLS, " Device using %s/%s",
+ seq_printf(m, " Device using %s/%s",
(aic_dev->cur.width == MSG_EXT_WDTR_BUS_16_BIT) ?
"Wide" : "Narrow",
(aic_dev->cur.offset != 0) ?
@@ -279,78 +195,59 @@ aic7xxx_proc_info ( struct Scsi_Host *HBAptr, char *buffer, char **start, off_t
sync_rate = aic7xxx_find_syncrate(p, &period, 0, &options);
if (sync_rate != NULL)
{
- size += sprintf(BLS, "%s MByte/sec, offset %d\n",
+ seq_printf(m, "%s MByte/sec, offset %d\n",
sync_rate->rate[rate],
aic_dev->cur.offset );
}
else
{
- size += sprintf(BLS, "3.3 MByte/sec, offset %d\n",
+ seq_printf(m, "3.3 MByte/sec, offset %d\n",
aic_dev->cur.offset );
}
}
- size += sprintf(BLS, " Transinfo settings: ");
- size += sprintf(BLS, "current(%d/%d/%d/%d), ",
+ seq_printf(m, " Transinfo settings: ");
+ seq_printf(m, "current(%d/%d/%d/%d), ",
aic_dev->cur.period,
aic_dev->cur.offset,
aic_dev->cur.width,
aic_dev->cur.options);
- size += sprintf(BLS, "goal(%d/%d/%d/%d), ",
+ seq_printf(m, "goal(%d/%d/%d/%d), ",
aic_dev->goal.period,
aic_dev->goal.offset,
aic_dev->goal.width,
aic_dev->goal.options);
- size += sprintf(BLS, "user(%d/%d/%d/%d)\n",
+ seq_printf(m, "user(%d/%d/%d/%d)\n",
p->user[tindex].period,
p->user[tindex].offset,
p->user[tindex].width,
p->user[tindex].options);
if(sdptr->simple_tags)
{
- size += sprintf(BLS, " Tagged Command Queueing Enabled, Ordered Tags %s, Depth %d/%d\n", sdptr->ordered_tags ? "Enabled" : "Disabled", sdptr->queue_depth, aic_dev->max_q_depth);
+ seq_printf(m, " Tagged Command Queueing Enabled, Ordered Tags %s, Depth %d/%d\n", sdptr->ordered_tags ? "Enabled" : "Disabled", sdptr->queue_depth, aic_dev->max_q_depth);
}
if(aic_dev->barrier_total)
- size += sprintf(BLS, " Total transfers %ld:\n (%ld/%ld/%ld/%ld reads/writes/REQ_BARRIER/Ordered Tags)\n",
+ seq_printf(m, " Total transfers %ld:\n (%ld/%ld/%ld/%ld reads/writes/REQ_BARRIER/Ordered Tags)\n",
aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total,
aic_dev->barrier_total, aic_dev->ordered_total);
else
- size += sprintf(BLS, " Total transfers %ld:\n (%ld/%ld reads/writes)\n",
+ seq_printf(m, " Total transfers %ld:\n (%ld/%ld reads/writes)\n",
aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total);
- size += sprintf(BLS, "%s\n", HDRB);
- size += sprintf(BLS, " Reads:");
+ seq_printf(m, "%s\n", HDRB);
+ seq_printf(m, " Reads:");
for (i = 0; i < ARRAY_SIZE(aic_dev->r_bins); i++)
{
- size += sprintf(BLS, " %10ld", aic_dev->r_bins[i]);
+ seq_printf(m, " %10ld", aic_dev->r_bins[i]);
}
- size += sprintf(BLS, "\n");
- size += sprintf(BLS, " Writes:");
+ seq_printf(m, "\n");
+ seq_printf(m, " Writes:");
for (i = 0; i < ARRAY_SIZE(aic_dev->w_bins); i++)
{
- size += sprintf(BLS, " %10ld", aic_dev->w_bins[i]);
+ seq_printf(m, " %10ld", aic_dev->w_bins[i]);
}
- size += sprintf(BLS, "\n");
- size += sprintf(BLS, "\n\n");
- }
- if (size >= aic7xxx_buffer_size)
- {
- printk(KERN_WARNING "aic7xxx: Overflow in aic7xxx_proc.c\n");
- }
-
- if (offset > size - 1)
- {
- kfree(aic7xxx_buffer);
- aic7xxx_buffer = NULL;
- aic7xxx_buffer_size = length = 0;
- *start = NULL;
+ seq_printf(m, "\n");
+ seq_printf(m, "\n\n");
}
- else
- {
- *start = buffer;
- length = min_t(int, length, size - offset);
- memcpy(buffer, &aic7xxx_buffer[offset], length);
- }
-
- return (length);
+ return 0;
}
/*