summaryrefslogtreecommitdiff
path: root/drivers/scsi/bfa/include/defs/bfa_defs_status.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/bfa/include/defs/bfa_defs_status.h')
-rw-r--r--drivers/scsi/bfa/include/defs/bfa_defs_status.h282
1 files changed, 0 insertions, 282 deletions
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_status.h b/drivers/scsi/bfa/include/defs/bfa_defs_status.h
deleted file mode 100644
index 6eb4e62096fc..000000000000
--- a/drivers/scsi/bfa/include/defs/bfa_defs_status.h
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-#ifndef __BFA_DEFS_STATUS_H__
-#define __BFA_DEFS_STATUS_H__
-
-/**
- * API status return values
- *
- * NOTE: The error msgs are auto generated from the comments. Only singe line
- * comments are supported
- */
-enum bfa_status {
- BFA_STATUS_OK = 0, /* Success */
- BFA_STATUS_FAILED = 1, /* Operation failed */
- BFA_STATUS_EINVAL = 2, /* Invalid params Check input
- * parameters */
- BFA_STATUS_ENOMEM = 3, /* Out of resources */
- BFA_STATUS_ENOSYS = 4, /* Function not implemented */
- BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if
- * persists, contact support */
- BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
- BFA_STATUS_ENOFCPORTS = 7, /* No FC ports resources */
- BFA_STATUS_NOFLASH = 8, /* Flash not present */
- BFA_STATUS_BADFLASH = 9, /* Flash is corrupted or bad */
- BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
- BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
- BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted
- * contact support */
- BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */
- BFA_STATUS_ABORTED = 14, /* Operation aborted */
- BFA_STATUS_NODEV = 15, /* Dev is not present */
- BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */
- BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */
- BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */
- BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */
- BFA_STATUS_FCPT_LS_RJT = 20, /* Got LS_RJT for FC Pass
- * through Req */
- BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */
- BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported
- * limit */
- BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed
- * setting */
- BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */
- BFA_STATUS_CNFG_FAILED = 25, /* Setting can not be persisted */
- BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */
- BFA_STATUS_NO_ADAPTER = 27, /* No Brocade Adapter Found */
- BFA_STATUS_LINKDOWN = 28, /* Link is down - Check or replace
- * SFP/cable */
- BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */
- BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */
- BFA_STATUS_NSLOGIN_FAILED = 31, /* Nameserver login failed */
- BFA_STATUS_NO_RPORTS = 32, /* No remote ports found */
- BFA_STATUS_NSQUERY_FAILED = 33, /* Nameserver query failed */
- BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */
- BFA_STATUS_RPORT_OFFLINE = 35, /* RPORT is not online */
- BFA_STATUS_TGTOPEN_FAILED = 36, /* Remote SCSI target open failed */
- BFA_STATUS_BAD_LUNS = 37, /* No valid LUNs found */
- BFA_STATUS_IO_FAILURE = 38, /* SCSI target IO failure */
- BFA_STATUS_NO_FABRIC = 39, /* No switched fabric present */
- BFA_STATUS_EBADF = 40, /* Bad file descriptor */
- BFA_STATUS_EINTR = 41, /* A signal was caught during ioctl */
- BFA_STATUS_EIO = 42, /* I/O error */
- BFA_STATUS_ENOTTY = 43, /* Inappropriate I/O control
- * operation */
- BFA_STATUS_ENXIO = 44, /* No such device or address */
- BFA_STATUS_EFOPEN = 45, /* Failed to open file */
- BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */
- BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port
- * first */
- BFA_STATUS_BADFRMHDR = 48, /* Bad frame header */
- BFA_STATUS_BADFRMSZ = 49, /* Bad frame size check and replace
- * SFP/cable */
- BFA_STATUS_MISSINGFRM = 50, /* Missing frame check and replace
- * SFP/cable or for Mezz card check and
- * replace pass through module */
- BFA_STATUS_LINKTIMEOUT = 51, /* Link timeout check and replace
- * SFP/cable */
- BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the
- * rport */
- BFA_STATUS_CHECKSUM_FAIL = 53, /* checksum failure */
- BFA_STATUS_GZME_FAILED = 54, /* Get zone member query failed */
- BFA_STATUS_SCSISTART_REQD = 55, /* SCSI disk require START command */
- BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists
- * contact support */
- BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */
- BFA_STATUS_MISMATCH = 58, /* Version mismatch */
- BFA_STATUS_IOC_ENABLED = 59, /* IOC is already enabled */
- BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled disable
- * adapter first */
- BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational. Enable IOC
- * and if it still fails,
- * contact support */
- BFA_STATUS_ADDR_MAP_FAILURE = 62, /* PCI base address not mapped
- * in OS */
- BFA_STATUS_SAME_NAME = 63, /* Name exists! use a different
- * name */
- BFA_STATUS_PENDING = 64, /* API completes asynchronously */
- BFA_STATUS_8G_SPD = 65, /* Speed setting not valid for
- * 8G HBA */
- BFA_STATUS_4G_SPD = 66, /* Speed setting not valid for
- * 4G HBA */
- BFA_STATUS_AD_IS_ENABLE = 67, /* Adapter is already enabled */
- BFA_STATUS_EINVAL_TOV = 68, /* Invalid path failover TOV */
- BFA_STATUS_EINVAL_QDEPTH = 69, /* Invalid queue depth value */
- BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version
- * mismatch */
- BFA_STATUS_DIAG_BUSY = 71, /* diag busy */
- BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
- BFA_STATUS_BEACON_OFF = 73, /* Port Beacon already off */
- BFA_STATUS_LBEACON_ON = 74, /* Link End-to-End Beacon already
- * on */
- BFA_STATUS_LBEACON_OFF = 75, /* Link End-to-End Beacon already
- * off */
- BFA_STATUS_PORT_NOT_INITED = 76, /* Port not initialized */
- BFA_STATUS_RPSC_ENABLED = 77, /* Target has a valid speed */
- BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
- BFA_STATUS_BAD_FILE = 79, /* Not a valid Brocade Boot Code
- * file */
- BFA_STATUS_RLIM_EN = 80, /* Target rate limiting is already
- * enabled */
- BFA_STATUS_RLIM_DIS = 81, /* Target rate limiting is already
- * disabled */
- BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
- BFA_STATUS_ADAPTER_DISABLED = 83, /* Adapter is already disabled */
- BFA_STATUS_BIOS_DISABLED = 84, /* Bios is already disabled */
- BFA_STATUS_AUTH_ENABLED = 85, /* Authentication is already
- * enabled */
- BFA_STATUS_AUTH_DISABLED = 86, /* Authentication is already
- * disabled */
- BFA_STATUS_ERROR_TRL_ENABLED = 87, /* Target rate limiting is
- * enabled */
- BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
- BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
- BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact
- * support */
- BFA_STATUS_INVALID_DEVID = 91, /* Invalid device id provided */
- BFA_STATUS_QOS_ENABLED = 92, /* QOS is already enabled */
- BFA_STATUS_QOS_DISABLED = 93, /* QOS is already disabled */
- BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /* Check configuration
- * key/value pair */
- BFA_STATUS_REG_FAIL = 95, /* Can't read windows registry */
- BFA_STATUS_IM_INV_CODE = 96, /* Invalid IOCTL code */
- BFA_STATUS_IM_INV_VLAN = 97, /* Invalid VLAN ID */
- BFA_STATUS_IM_INV_ADAPT_NAME = 98, /* Invalid adapter name */
- BFA_STATUS_IM_LOW_RESOURCES = 99, /* Memory allocation failure in
- * driver */
- BFA_STATUS_IM_VLANID_IS_PVID = 100, /* Given VLAN id same as PVID */
- BFA_STATUS_IM_VLANID_EXISTS = 101, /* Given VLAN id already exists */
- BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /* Updating firmware with new
- * VLAN ID failed */
- BFA_STATUS_PORTLOG_ENABLED = 103, /* Port Log is already enabled */
- BFA_STATUS_PORTLOG_DISABLED = 104, /* Port Log is already disabled */
- BFA_STATUS_FILE_NOT_FOUND = 105, /* Specified file could not be
- * found */
- BFA_STATUS_QOS_FC_ONLY = 106, /* QOS can be enabled for FC mode
- * only */
- BFA_STATUS_RLIM_FC_ONLY = 107, /* RATELIM can be enabled for FC mode
- * only */
- BFA_STATUS_CT_SPD = 108, /* Invalid speed selection for Catapult. */
- BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
- BFA_STATUS_CEE_NOT_DN = 110, /* eth port is not at down state, please
- * bring down first */
- BFA_STATUS_10G_SPD = 111, /* Speed setting not valid for 10G CNA */
- BFA_STATUS_IM_INV_TEAM_NAME = 112, /* Invalid team name */
- BFA_STATUS_IM_DUP_TEAM_NAME = 113, /* Given team name already
- * exists */
- BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /* Given adapter is part
- * of another team */
- BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /* Adapter has VLANs configured.
- * Delete all VLANs to become
- * part of the team */
- BFA_STATUS_IM_PVID_MISMATCH = 116, /* Mismatching PVIDs configured
- * for adapters */
- BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /* Mismatching link speeds
- * configured for adapters */
- BFA_STATUS_IM_MTU_MISMATCH = 118, /* Mismatching MTUs configured for
- * adapters */
- BFA_STATUS_IM_RSS_MISMATCH = 119, /* Mismatching RSS parameters
- * configured for adapters */
- BFA_STATUS_IM_HDS_MISMATCH = 120, /* Mismatching HDS parameters
- * configured for adapters */
- BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /* Mismatching offload
- * parameters configured for
- * adapters */
- BFA_STATUS_IM_PORT_PARAMS = 122, /* Error setting port parameters */
- BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /* Port is not part of team */
- BFA_STATUS_IM_CANNOT_REM_PRI = 124, /* Primary adapter cannot be
- * removed. Change primary before
- * removing */
- BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /* Exceeding maximum ports
- * per team */
- BFA_STATUS_IM_LAST_PORT_DELETE = 126, /* Last port in team being
- * deleted */
- BFA_STATUS_IM_NO_DRIVER = 127, /* IM driver is not installed */
- BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /* Exceeding maximum VLANs
- * per port */
- BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not
- * allowed for CNA */
- BFA_STATUS_NO_MINPORT_DRIVER = 130, /* Miniport driver is not
- * loaded */
- BFA_STATUS_CARD_TYPE_MISMATCH = 131, /* Card type mismatch */
- BFA_STATUS_BAD_ASICBLK = 132, /* Bad ASIC block */
- BFA_STATUS_NO_DRIVER = 133, /* Brocade adapter/driver not installed
- * or loaded */
- BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */
- BFA_STATUS_IM_NO_VLAN = 135, /* No VLANs configured on the adapter */
- BFA_STATUS_IM_ETH_LB_FAILED = 136, /* Ethernet loopback test failed */
- BFA_STATUS_IM_PVID_REMOVE = 137, /* Cannot remove port VLAN (PVID) */
- BFA_STATUS_IM_PVID_EDIT = 138, /* Cannot edit port VLAN (PVID) */
- BFA_STATUS_CNA_NO_BOOT = 139, /* Boot upload not allowed for CNA */
- BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to
- * Non-Zero Value */
- BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network
- * Subsystem Lock Failed.Please
- * try after some time */
- BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsystem
- * handle Failed. Please try
- * after some time */
- BFA_STATUS_IM_NOT_BOUND = 143, /* IM driver is not active */
- BFA_STATUS_INSUFFICIENT_PERMS = 144, /* User doesn't have sufficient
- * permissions to execute the BCU
- * application */
- BFA_STATUS_IM_INV_VLAN_NAME = 145, /* Invalid/Reserved VLAN name
- * string. The name is not allowed
- * for the normal VLAN */
- BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
- BFA_STATUS_IM_PASSTHRU_EDIT = 147, /* Can not edit passthrough VLAN
- * id */
- BFA_STATUS_IM_BIND_FAILED = 148, /* IM Driver bind operation
- * failed */
- BFA_STATUS_IM_UNBIND_FAILED = 149, /* IM Driver unbind operation
- * failed */
- BFA_STATUS_IM_PORT_IN_TEAM = 150, /* Port is already part of the
- * team */
- BFA_STATUS_IM_VLAN_NOT_FOUND = 151, /* VLAN ID doesn't exists */
- BFA_STATUS_IM_TEAM_NOT_FOUND = 152, /* Teaming configuration doesn't
- * exists */
- BFA_STATUS_IM_TEAM_CFG_NOT_ALLOWED = 153, /* Given settings are not
- * allowed for the current
- * Teaming mode */
- BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot
- * configuration */
- BFA_STATUS_DEVID_MISSING = 155, /* Boot image is not for the adapter(s)
- * installed */
- BFA_STATUS_BAD_FWCFG = 156, /* Bad firmware configuration */
- BFA_STATUS_CREATE_FILE = 157, /* Failed to create temporary file */
- BFA_STATUS_INVALID_VENDOR = 158, /* Invalid switch vendor */
- BFA_STATUS_SFP_NOT_READY = 159, /* SFP info is not ready. Retry */
- BFA_STATUS_NO_TOPOLOGY_FOR_CNA = 160, /* Topology command not
- * applicable to CNA */
- BFA_STATUS_BOOT_CODE_UPDATED = 161, /* reboot -- -r is needed after
- * boot code updated */
- BFA_STATUS_BOOT_VERSION = 162, /* Boot code version not compatible with
- * the driver installed */
- BFA_STATUS_CARDTYPE_MISSING = 163, /* Boot image is not for the
- * adapter(s) installed */
- BFA_STATUS_INVALID_CARDTYPE = 164, /* Invalid card type provided */
- BFA_STATUS_MAX_VAL /* Unknown error code */
-};
-#define bfa_status_t enum bfa_status
-
-enum bfa_eproto_status {
- BFA_EPROTO_BAD_ACCEPT = 0,
- BFA_EPROTO_UNKNOWN_RSP = 1
-};
-#define bfa_eproto_status_t enum bfa_eproto_status
-
-#endif /* __BFA_DEFS_STATUS_H__ */