summaryrefslogtreecommitdiff
path: root/drivers/scsi/gvp11.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/gvp11.c')
-rw-r--r--drivers/scsi/gvp11.c541
1 files changed, 286 insertions, 255 deletions
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 18b7102bb80e..2ce26eb7a1ec 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -1,36 +1,35 @@
#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/zorro.h>
-#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <linux/spinlock.h>
#include "scsi.h"
-#include <scsi/scsi_host.h>
#include "wd33c93.h"
#include "gvp11.h"
-#include <linux/stat.h>
+#define CHECK_WD33C93
-#define DMA(ptr) ((gvp11_scsiregs *)((ptr)->base))
+struct gvp11_hostdata {
+ struct WD33C93_hostdata wh;
+ struct gvp11_scsiregs *regs;
+};
-static irqreturn_t gvp11_intr(int irq, void *_instance)
+static irqreturn_t gvp11_intr(int irq, void *data)
{
+ struct Scsi_Host *instance = data;
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+ unsigned int status = hdata->regs->CNTR;
unsigned long flags;
- unsigned int status;
- struct Scsi_Host *instance = (struct Scsi_Host *)_instance;
- status = DMA(instance)->CNTR;
if (!(status & GVP11_DMAC_INT_PENDING))
return IRQ_NONE;
@@ -50,64 +49,66 @@ void gvp11_setup(char *str, int *ints)
static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
{
struct Scsi_Host *instance = cmd->device->host;
- struct WD33C93_hostdata *hdata = shost_priv(instance);
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct gvp11_scsiregs *regs = hdata->regs;
unsigned short cntr = GVP11_DMAC_INT_ENABLE;
unsigned long addr = virt_to_bus(cmd->SCp.ptr);
int bank_mask;
static int scsi_alloc_out_of_range = 0;
/* use bounce buffer if the physical address is bad */
- if (addr & hdata->dma_xfer_mask) {
- hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
+ if (addr & wh->dma_xfer_mask) {
+ wh->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff;
if (!scsi_alloc_out_of_range) {
- hdata->dma_bounce_buffer =
- kmalloc(hdata->dma_bounce_len, GFP_KERNEL);
- hdata->dma_buffer_pool = BUF_SCSI_ALLOCED;
+ wh->dma_bounce_buffer =
+ kmalloc(wh->dma_bounce_len, GFP_KERNEL);
+ wh->dma_buffer_pool = BUF_SCSI_ALLOCED;
}
if (scsi_alloc_out_of_range ||
- !hdata->dma_bounce_buffer) {
- hdata->dma_bounce_buffer =
- amiga_chip_alloc(hdata->dma_bounce_len,
+ !wh->dma_bounce_buffer) {
+ wh->dma_bounce_buffer =
+ amiga_chip_alloc(wh->dma_bounce_len,
"GVP II SCSI Bounce Buffer");
- if (!hdata->dma_bounce_buffer) {
- hdata->dma_bounce_len = 0;
+ if (!wh->dma_bounce_buffer) {
+ wh->dma_bounce_len = 0;
return 1;
}
- hdata->dma_buffer_pool = BUF_CHIP_ALLOCED;
+ wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
}
/* check if the address of the bounce buffer is OK */
- addr = virt_to_bus(hdata->dma_bounce_buffer);
+ addr = virt_to_bus(wh->dma_bounce_buffer);
- if (addr & hdata->dma_xfer_mask) {
+ if (addr & wh->dma_xfer_mask) {
/* fall back to Chip RAM if address out of range */
- if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED) {
- kfree(hdata->dma_bounce_buffer);
+ if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED) {
+ kfree(wh->dma_bounce_buffer);
scsi_alloc_out_of_range = 1;
} else {
- amiga_chip_free(hdata->dma_bounce_buffer);
+ amiga_chip_free(wh->dma_bounce_buffer);
}
- hdata->dma_bounce_buffer =
- amiga_chip_alloc(hdata->dma_bounce_len,
+ wh->dma_bounce_buffer =
+ amiga_chip_alloc(wh->dma_bounce_len,
"GVP II SCSI Bounce Buffer");
- if (!hdata->dma_bounce_buffer) {
- hdata->dma_bounce_len = 0;
+ if (!wh->dma_bounce_buffer) {
+ wh->dma_bounce_len = 0;
return 1;
}
- addr = virt_to_bus(hdata->dma_bounce_buffer);
- hdata->dma_buffer_pool = BUF_CHIP_ALLOCED;
+ addr = virt_to_bus(wh->dma_bounce_buffer);
+ wh->dma_buffer_pool = BUF_CHIP_ALLOCED;
}
if (!dir_in) {
/* copy to bounce buffer for a write */
- memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr,
+ memcpy(wh->dma_bounce_buffer, cmd->SCp.ptr,
cmd->SCp.this_residual);
}
}
@@ -116,11 +117,11 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
if (!dir_in)
cntr |= GVP11_DMAC_DIR_WRITE;
- hdata->dma_dir = dir_in;
- DMA(cmd->device->host)->CNTR = cntr;
+ wh->dma_dir = dir_in;
+ regs->CNTR = cntr;
/* setup DMA *physical* address */
- DMA(cmd->device->host)->ACR = addr;
+ regs->ACR = addr;
if (dir_in) {
/* invalidate any cache */
@@ -130,12 +131,12 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
cache_push(addr, cmd->SCp.this_residual);
}
- bank_mask = (~hdata->dma_xfer_mask >> 18) & 0x01c0;
+ bank_mask = (~wh->dma_xfer_mask >> 18) & 0x01c0;
if (bank_mask)
- DMA(cmd->device->host)->BANK = bank_mask & (addr >> 18);
+ regs->BANK = bank_mask & (addr >> 18);
/* start DMA */
- DMA(cmd->device->host)->ST_DMA = 1;
+ regs->ST_DMA = 1;
/* return success */
return 0;
@@ -144,236 +145,53 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
int status)
{
- struct WD33C93_hostdata *hdata = shost_priv(instance);
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+ struct WD33C93_hostdata *wh = &hdata->wh;
+ struct gvp11_scsiregs *regs = hdata->regs;
/* stop DMA */
- DMA(instance)->SP_DMA = 1;
+ regs->SP_DMA = 1;
/* remove write bit from CONTROL bits */
- DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
+ regs->CNTR = GVP11_DMAC_INT_ENABLE;
/* copy from a bounce buffer, if necessary */
- if (status && hdata->dma_bounce_buffer) {
- if (hdata->dma_dir && SCpnt)
- memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer,
+ if (status && wh->dma_bounce_buffer) {
+ if (wh->dma_dir && SCpnt)
+ memcpy(SCpnt->SCp.ptr, wh->dma_bounce_buffer,
SCpnt->SCp.this_residual);
- if (hdata->dma_buffer_pool == BUF_SCSI_ALLOCED)
- kfree(hdata->dma_bounce_buffer);
- else
- amiga_chip_free(hdata->dma_bounce_buffer);
-
- hdata->dma_bounce_buffer = NULL;
- hdata->dma_bounce_len = 0;
- }
-}
-
-#define CHECK_WD33C93
-
-int __init gvp11_detect(struct scsi_host_template *tpnt)
-{
- static unsigned char called = 0;
- struct Scsi_Host *instance;
- unsigned long address;
- unsigned int epc;
- struct zorro_dev *z = NULL;
- unsigned int default_dma_xfer_mask;
- struct WD33C93_hostdata *hdata;
- wd33c93_regs regs;
- int num_gvp11 = 0;
-#ifdef CHECK_WD33C93
- volatile unsigned char *sasr_3393, *scmd_3393;
- unsigned char save_sasr;
- unsigned char q, qq;
-#endif
-
- if (!MACH_IS_AMIGA || called)
- return 0;
- called = 1;
-
- tpnt->proc_name = "GVP11";
- tpnt->proc_info = &wd33c93_proc_info;
-
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- /*
- * This should (hopefully) be the correct way to identify
- * all the different GVP SCSI controllers (except for the
- * SERIES I though).
- */
-
- if (z->id == ZORRO_PROD_GVP_COMBO_030_R3_SCSI ||
- z->id == ZORRO_PROD_GVP_SERIES_II)
- default_dma_xfer_mask = ~0x00ffffff;
- else if (z->id == ZORRO_PROD_GVP_GFORCE_030_SCSI ||
- z->id == ZORRO_PROD_GVP_A530_SCSI ||
- z->id == ZORRO_PROD_GVP_COMBO_030_R4_SCSI)
- default_dma_xfer_mask = ~0x01ffffff;
- else if (z->id == ZORRO_PROD_GVP_A1291 ||
- z->id == ZORRO_PROD_GVP_GFORCE_040_SCSI_1)
- default_dma_xfer_mask = ~0x07ffffff;
+ if (wh->dma_buffer_pool == BUF_SCSI_ALLOCED)
+ kfree(wh->dma_bounce_buffer);
else
- continue;
-
- /*
- * Rumors state that some GVP ram boards use the same product
- * code as the SCSI controllers. Therefore if the board-size
- * is not 64KB we asume it is a ram board and bail out.
- */
- if (z->resource.end - z->resource.start != 0xffff)
- continue;
+ amiga_chip_free(wh->dma_bounce_buffer);
- address = z->resource.start;
- if (!request_mem_region(address, 256, "wd33c93"))
- continue;
-
-#ifdef CHECK_WD33C93
-
- /*
- * These darn GVP boards are a problem - it can be tough to tell
- * whether or not they include a SCSI controller. This is the
- * ultimate Yet-Another-GVP-Detection-Hack in that it actually
- * probes for a WD33c93 chip: If we find one, it's extremely
- * likely that this card supports SCSI, regardless of Product_
- * Code, Board_Size, etc.
- */
-
- /* Get pointers to the presumed register locations and save contents */
-
- sasr_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SASR);
- scmd_3393 = &(((gvp11_scsiregs *)(ZTWO_VADDR(address)))->SCMD);
- save_sasr = *sasr_3393;
-
- /* First test the AuxStatus Reg */
-
- q = *sasr_3393; /* read it */
- if (q & 0x08) /* bit 3 should always be clear */
- goto release;
- *sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */
- if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
- *sasr_3393 = save_sasr; /* Oops - restore this byte */
- goto release;
- }
- if (*sasr_3393 != q) { /* should still read the same */
- *sasr_3393 = save_sasr; /* Oops - restore this byte */
- goto release;
- }
- if (*scmd_3393 != q) /* and so should the image at 0x1f */
- goto release;
-
- /*
- * Ok, we probably have a wd33c93, but let's check a few other places
- * for good measure. Make sure that this works for both 'A and 'B
- * chip versions.
- */
-
- *sasr_3393 = WD_SCSI_STATUS;
- q = *scmd_3393;
- *sasr_3393 = WD_SCSI_STATUS;
- *scmd_3393 = ~q;
- *sasr_3393 = WD_SCSI_STATUS;
- qq = *scmd_3393;
- *sasr_3393 = WD_SCSI_STATUS;
- *scmd_3393 = q;
- if (qq != q) /* should be read only */
- goto release;
- *sasr_3393 = 0x1e; /* this register is unimplemented */
- q = *scmd_3393;
- *sasr_3393 = 0x1e;
- *scmd_3393 = ~q;
- *sasr_3393 = 0x1e;
- qq = *scmd_3393;
- *sasr_3393 = 0x1e;
- *scmd_3393 = q;
- if (qq != q || qq != 0xff) /* should be read only, all 1's */
- goto release;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- q = *scmd_3393;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- *scmd_3393 = ~q;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- qq = *scmd_3393;
- *sasr_3393 = WD_TIMEOUT_PERIOD;
- *scmd_3393 = q;
- if (qq != (~q & 0xff)) /* should be read/write */
- goto release;
-#endif
-
- instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
- if (instance == NULL)
- goto release;
- instance->base = ZTWO_VADDR(address);
- instance->irq = IRQ_AMIGA_PORTS;
- instance->unique_id = z->slotaddr;
-
- hdata = shost_priv(instance);
- if (gvp11_xfer_mask)
- hdata->dma_xfer_mask = gvp11_xfer_mask;
- else
- hdata->dma_xfer_mask = default_dma_xfer_mask;
-
- DMA(instance)->secret2 = 1;
- DMA(instance)->secret1 = 0;
- DMA(instance)->secret3 = 15;
- while (DMA(instance)->CNTR & GVP11_DMAC_BUSY)
- ;
- DMA(instance)->CNTR = 0;
-
- DMA(instance)->BANK = 0;
-
- epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
-
- /*
- * Check for 14MHz SCSI clock
- */
- regs.SASR = &(DMA(instance)->SASR);
- regs.SCMD = &(DMA(instance)->SCMD);
- hdata->no_sync = 0xff;
- hdata->fast = 0;
- hdata->dma_mode = CTRL_DMA;
- wd33c93_init(instance, regs, dma_setup, dma_stop,
- (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
- : WD33C93_FS_12_15);
-
- if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
- "GVP11 SCSI", instance))
- goto unregister;
- DMA(instance)->CNTR = GVP11_DMAC_INT_ENABLE;
- num_gvp11++;
- continue;
-
-unregister:
- scsi_unregister(instance);
-release:
- release_mem_region(address, 256);
+ wh->dma_bounce_buffer = NULL;
+ wh->dma_bounce_len = 0;
}
-
- return num_gvp11;
}
static int gvp11_bus_reset(struct scsi_cmnd *cmd)
{
+ struct Scsi_Host *instance = cmd->device->host;
+
/* FIXME perform bus-specific reset */
/* FIXME 2: shouldn't we no-op this function (return
FAILED), and fall back to host reset function,
wd33c93_host_reset ? */
- spin_lock_irq(cmd->device->host->host_lock);
+ spin_lock_irq(instance->host_lock);
wd33c93_host_reset(cmd);
- spin_unlock_irq(cmd->device->host->host_lock);
+ spin_unlock_irq(instance->host_lock);
return SUCCESS;
}
-
-#define HOSTS_C
-
-#include "gvp11.h"
-
-static struct scsi_host_template driver_template = {
- .proc_name = "GVP11",
+static struct scsi_host_template gvp11_scsi_template = {
+ .module = THIS_MODULE,
.name = "GVP Series II SCSI",
- .detect = gvp11_detect,
- .release = gvp11_release,
+ .proc_info = wd33c93_proc_info,
+ .proc_name = "GVP11",
.queuecommand = wd33c93_queuecommand,
.eh_abort_handler = wd33c93_abort,
.eh_bus_reset_handler = gvp11_bus_reset,
@@ -385,17 +203,230 @@ static struct scsi_host_template driver_template = {
.use_clustering = DISABLE_CLUSTERING
};
+static int __devinit check_wd33c93(struct gvp11_scsiregs *regs)
+{
+#ifdef CHECK_WD33C93
+ volatile unsigned char *sasr_3393, *scmd_3393;
+ unsigned char save_sasr;
+ unsigned char q, qq;
-#include "scsi_module.c"
+ /*
+ * These darn GVP boards are a problem - it can be tough to tell
+ * whether or not they include a SCSI controller. This is the
+ * ultimate Yet-Another-GVP-Detection-Hack in that it actually
+ * probes for a WD33c93 chip: If we find one, it's extremely
+ * likely that this card supports SCSI, regardless of Product_
+ * Code, Board_Size, etc.
+ */
+
+ /* Get pointers to the presumed register locations and save contents */
+
+ sasr_3393 = &regs->SASR;
+ scmd_3393 = &regs->SCMD;
+ save_sasr = *sasr_3393;
+
+ /* First test the AuxStatus Reg */
+
+ q = *sasr_3393; /* read it */
+ if (q & 0x08) /* bit 3 should always be clear */
+ return -ENODEV;
+ *sasr_3393 = WD_AUXILIARY_STATUS; /* setup indirect address */
+ if (*sasr_3393 == WD_AUXILIARY_STATUS) { /* shouldn't retain the write */
+ *sasr_3393 = save_sasr; /* Oops - restore this byte */
+ return -ENODEV;
+ }
+ if (*sasr_3393 != q) { /* should still read the same */
+ *sasr_3393 = save_sasr; /* Oops - restore this byte */
+ return -ENODEV;
+ }
+ if (*scmd_3393 != q) /* and so should the image at 0x1f */
+ return -ENODEV;
+
+ /*
+ * Ok, we probably have a wd33c93, but let's check a few other places
+ * for good measure. Make sure that this works for both 'A and 'B
+ * chip versions.
+ */
+
+ *sasr_3393 = WD_SCSI_STATUS;
+ q = *scmd_3393;
+ *sasr_3393 = WD_SCSI_STATUS;
+ *scmd_3393 = ~q;
+ *sasr_3393 = WD_SCSI_STATUS;
+ qq = *scmd_3393;
+ *sasr_3393 = WD_SCSI_STATUS;
+ *scmd_3393 = q;
+ if (qq != q) /* should be read only */
+ return -ENODEV;
+ *sasr_3393 = 0x1e; /* this register is unimplemented */
+ q = *scmd_3393;
+ *sasr_3393 = 0x1e;
+ *scmd_3393 = ~q;
+ *sasr_3393 = 0x1e;
+ qq = *scmd_3393;
+ *sasr_3393 = 0x1e;
+ *scmd_3393 = q;
+ if (qq != q || qq != 0xff) /* should be read only, all 1's */
+ return -ENODEV;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ q = *scmd_3393;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ *scmd_3393 = ~q;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ qq = *scmd_3393;
+ *sasr_3393 = WD_TIMEOUT_PERIOD;
+ *scmd_3393 = q;
+ if (qq != (~q & 0xff)) /* should be read/write */
+ return -ENODEV;
+#endif /* CHECK_WD33C93 */
-int gvp11_release(struct Scsi_Host *instance)
+ return 0;
+}
+
+static int __devinit gvp11_probe(struct zorro_dev *z,
+ const struct zorro_device_id *ent)
{
-#ifdef MODULE
- DMA(instance)->CNTR = 0;
- release_mem_region(ZTWO_PADDR(instance->base), 256);
+ struct Scsi_Host *instance;
+ unsigned long address;
+ int error;
+ unsigned int epc;
+ unsigned int default_dma_xfer_mask;
+ struct gvp11_hostdata *hdata;
+ struct gvp11_scsiregs *regs;
+ wd33c93_regs wdregs;
+
+ default_dma_xfer_mask = ent->driver_data;
+
+ /*
+ * Rumors state that some GVP ram boards use the same product
+ * code as the SCSI controllers. Therefore if the board-size
+ * is not 64KB we asume it is a ram board and bail out.
+ */
+ if (zorro_resource_len(z) != 0x10000)
+ return -ENODEV;
+
+ address = z->resource.start;
+ if (!request_mem_region(address, 256, "wd33c93"))
+ return -EBUSY;
+
+ regs = (struct gvp11_scsiregs *)(ZTWO_VADDR(address));
+
+ error = check_wd33c93(regs);
+ if (error)
+ goto fail_check_or_alloc;
+
+ instance = scsi_host_alloc(&gvp11_scsi_template,
+ sizeof(struct gvp11_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_check_or_alloc;
+ }
+
+ instance->irq = IRQ_AMIGA_PORTS;
+ instance->unique_id = z->slotaddr;
+
+ regs->secret2 = 1;
+ regs->secret1 = 0;
+ regs->secret3 = 15;
+ while (regs->CNTR & GVP11_DMAC_BUSY)
+ ;
+ regs->CNTR = 0;
+ regs->BANK = 0;
+
+ wdregs.SASR = &regs->SASR;
+ wdregs.SCMD = &regs->SCMD;
+
+ hdata = shost_priv(instance);
+ if (gvp11_xfer_mask)
+ hdata->wh.dma_xfer_mask = gvp11_xfer_mask;
+ else
+ hdata->wh.dma_xfer_mask = default_dma_xfer_mask;
+
+ hdata->wh.no_sync = 0xff;
+ hdata->wh.fast = 0;
+ hdata->wh.dma_mode = CTRL_DMA;
+ hdata->regs = regs;
+
+ /*
+ * Check for 14MHz SCSI clock
+ */
+ epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
+ wd33c93_init(instance, wdregs, dma_setup, dma_stop,
+ (epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
+ : WD33C93_FS_12_15);
+
+ error = request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
+ "GVP11 SCSI", instance);
+ if (error)
+ goto fail_irq;
+
+ regs->CNTR = GVP11_DMAC_INT_ENABLE;
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ zorro_set_drvdata(z, instance);
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
free_irq(IRQ_AMIGA_PORTS, instance);
-#endif
- return 1;
+fail_irq:
+ scsi_host_put(instance);
+fail_check_or_alloc:
+ release_mem_region(address, 256);
+ return error;
+}
+
+static void __devexit gvp11_remove(struct zorro_dev *z)
+{
+ struct Scsi_Host *instance = zorro_get_drvdata(z);
+ struct gvp11_hostdata *hdata = shost_priv(instance);
+
+ hdata->regs->CNTR = 0;
+ scsi_remove_host(instance);
+ free_irq(IRQ_AMIGA_PORTS, instance);
+ scsi_host_put(instance);
+ release_mem_region(z->resource.start, 256);
+}
+
+ /*
+ * This should (hopefully) be the correct way to identify
+ * all the different GVP SCSI controllers (except for the
+ * SERIES I though).
+ */
+
+static struct zorro_device_id gvp11_zorro_tbl[] __devinitdata = {
+ { ZORRO_PROD_GVP_COMBO_030_R3_SCSI, ~0x00ffffff },
+ { ZORRO_PROD_GVP_SERIES_II, ~0x00ffffff },
+ { ZORRO_PROD_GVP_GFORCE_030_SCSI, ~0x01ffffff },
+ { ZORRO_PROD_GVP_A530_SCSI, ~0x01ffffff },
+ { ZORRO_PROD_GVP_COMBO_030_R4_SCSI, ~0x01ffffff },
+ { ZORRO_PROD_GVP_A1291, ~0x07ffffff },
+ { ZORRO_PROD_GVP_GFORCE_040_SCSI_1, ~0x07ffffff },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(zorro, gvp11_zorro_tbl);
+
+static struct zorro_driver gvp11_driver = {
+ .name = "gvp11",
+ .id_table = gvp11_zorro_tbl,
+ .probe = gvp11_probe,
+ .remove = __devexit_p(gvp11_remove),
+};
+
+static int __init gvp11_init(void)
+{
+ return zorro_register_driver(&gvp11_driver);
+}
+module_init(gvp11_init);
+
+static void __exit gvp11_exit(void)
+{
+ zorro_unregister_driver(&gvp11_driver);
}
+module_exit(gvp11_exit);
+MODULE_DESCRIPTION("GVP Series II SCSI");
MODULE_LICENSE("GPL");