1 files changed, 40 insertions, 30 deletions

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 6b35d0dfe64c..cef5d49b59cd 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -5971,10 +5971,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 
 	/* Save the PCI command register */
 	pci_read_config_word(pdev, 4, &command_register);
-	/* Turn the board off.  This is so that later pci_restore_state()
-	 * won't turn the board on before the rest of config space is ready.
-	 */
-	pci_disable_device(pdev);
 	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
@@ -6022,11 +6018,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 		goto unmap_cfgtable;
 
 	pci_restore_state(pdev);
-	rc = pci_enable_device(pdev);
-	if (rc) {
-		dev_warn(&pdev->dev, "failed to enable device.\n");
-		goto unmap_cfgtable;
-	}
 	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
@@ -6159,26 +6150,22 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
 		h->msix_vector = MAX_REPLY_QUEUES;
 		if (h->msix_vector > num_online_cpus())
 			h->msix_vector = num_online_cpus();
-		err = pci_enable_msix(h->pdev, hpsa_msix_entries,
-				      h->msix_vector);
-		if (err > 0) {
+		err = pci_enable_msix_range(h->pdev, hpsa_msix_entries,
+					    1, h->msix_vector);
+		if (err < 0) {
+			dev_warn(&h->pdev->dev, "MSI-X init failed %d\n", err);
+			h->msix_vector = 0;
+			goto single_msi_mode;
+		} else if (err < h->msix_vector) {
 			dev_warn(&h->pdev->dev, "only %d MSI-X vectors "
 			       "available\n", err);
-			h->msix_vector = err;
-			err = pci_enable_msix(h->pdev, hpsa_msix_entries,
-					      h->msix_vector);
-		}
-		if (!err) {
-			for (i = 0; i < h->msix_vector; i++)
-				h->intr[i] = hpsa_msix_entries[i].vector;
-			return;
-		} else {
-			dev_warn(&h->pdev->dev, "MSI-X init failed %d\n",
-			       err);
-			h->msix_vector = 0;
-			goto default_int_mode;
 		}
+		h->msix_vector = err;
+		for (i = 0; i < h->msix_vector; i++)
+			h->intr[i] = hpsa_msix_entries[i].vector;
+		return;
 	}
+single_msi_mode:
 	if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
 		dev_info(&h->pdev->dev, "MSI\n");
 		if (!pci_enable_msi(h->pdev))
@@ -6541,6 +6528,23 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 	if (!reset_devices)
 		return 0;
 
+	/* kdump kernel is loading, we don't know in which state is
+	 * the pci interface. The dev->enable_cnt is equal zero
+	 * so we call enable+disable, wait a while and switch it on.
+	 */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "Failed to enable PCI device\n");
+		return -ENODEV;
+	}
+	pci_disable_device(pdev);
+	msleep(260);			/* a randomly chosen number */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		return -ENODEV;
+	}
+	pci_set_master(pdev);
 	/* Reset the controller with a PCI power-cycle or via doorbell */
 	rc = hpsa_kdump_hard_reset_controller(pdev);
 
@@ -6549,10 +6553,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 	 * "performant mode".  Or, it might be 640x, which can't reset
 	 * due to concerns about shared bbwc between 6402/6404 pair.
 	 */
-	if (rc == -ENOTSUPP)
-		return rc; /* just try to do the kdump anyhow. */
-	if (rc)
-		return -ENODEV;
+	if (rc) {
+		if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */
+			rc = -ENODEV;
+		goto out_disable;
+	}
 
 	/* Now try to get the controller to respond to a no-op */
 	dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
@@ -6563,7 +6568,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev)
 			dev_warn(&pdev->dev, "no-op failed%s\n",
 					(i < 11 ? "; re-trying" : ""));
 	}
-	return 0;
+
+out_disable:
+
+	pci_disable_device(pdev);
+	return rc;
 }
 
 static int hpsa_allocate_cmd_pool(struct ctlr_info *h)
@@ -6743,6 +6752,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
 		iounmap(h->transtable);
 	if (h->cfgtable)
 		iounmap(h->cfgtable);
+	pci_disable_device(h->pdev);
 	pci_release_regions(h->pdev);
 	kfree(h);
 }