diff options
Diffstat (limited to 'drivers/scsi/lpfc')
-rw-r--r-- | drivers/scsi/lpfc/lpfc.h | 16 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 69 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_debugfs.c | 4 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_els.c | 20 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_hbadisc.c | 8 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_nportdisc.c | 5 | ||||
-rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 7 |
7 files changed, 89 insertions, 40 deletions
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 8943d42fc406..088b764aefa4 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -377,6 +377,7 @@ struct lpfc_vport { #define FC_VPORT_LOGO_RCVD 0x200 /* LOGO received on vport */ #define FC_RSCN_DISCOVERY 0x400 /* Auth all devices after RSCN */ #define FC_LOGO_RCVD_DID_CHNG 0x800 /* FDISC on phys port detect DID chng*/ +#define FC_PT2PT_NO_NVME 0x1000 /* Don't send NVME PRLI */ #define FC_SCSI_SCAN_TMO 0x4000 /* scsi scan timer running */ #define FC_ABORT_DISCOVERY 0x8000 /* we want to abort discovery */ #define FC_NDISC_ACTIVE 0x10000 /* NPort discovery active */ @@ -735,7 +736,6 @@ struct lpfc_hba { #define HBA_DEVLOSS_TMO 0x2000 /* HBA in devloss timeout */ #define HBA_RRQ_ACTIVE 0x4000 /* process the rrq active list */ #define HBA_IOQ_FLUSH 0x8000 /* FCP/NVME I/O queues being flushed */ -#define HBA_FW_DUMP_OP 0x10000 /* Skips fn reset before FW dump */ #define HBA_RECOVERABLE_UE 0x20000 /* Firmware supports recoverable UE */ #define HBA_FORCED_LINK_SPEED 0x40000 /* * Firmware supports Forced Link Speed @@ -744,6 +744,7 @@ struct lpfc_hba { #define HBA_FLOGI_ISSUED 0x100000 /* FLOGI was issued */ #define HBA_DEFER_FLOGI 0x800000 /* Defer FLOGI till read_sparm cmpl */ + struct completion *fw_dump_cmpl; /* cmpl event tracker for fw_dump */ uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/ struct lpfc_dmabuf slim2p; @@ -870,6 +871,16 @@ struct lpfc_hba { uint32_t cfg_hostmem_hgp; uint32_t cfg_log_verbose; uint32_t cfg_enable_fc4_type; +#define LPFC_ENABLE_FCP 1 +#define LPFC_ENABLE_NVME 2 +#define LPFC_ENABLE_BOTH 3 +#if (IS_ENABLED(CONFIG_NVME_FC)) +#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_BOTH +#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_BOTH +#else +#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP +#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP +#endif uint32_t cfg_aer_support; uint32_t cfg_sriov_nr_virtfn; uint32_t cfg_request_firmware_upgrade; @@ -892,9 +903,6 @@ struct lpfc_hba { uint32_t cfg_ras_fwlog_func; uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */ uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */ -#define LPFC_ENABLE_FCP 1 -#define LPFC_ENABLE_NVME 2 -#define LPFC_ENABLE_BOTH 3 uint32_t cfg_enable_pbde; struct nvmet_fc_target_port *targetport; lpfc_vpd_t vpd; /* vital product data */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index f0ecfe565660..1e59c60a9dcc 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1145,6 +1145,9 @@ lpfc_issue_lip(struct Scsi_Host *shost) pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; pmboxq->u.mb.mbxOwner = OWN_HOST; + if ((vport->fc_flag & FC_PT2PT) && (vport->fc_flag & FC_PT2PT_NO_NVME)) + vport->fc_flag &= ~FC_PT2PT_NO_NVME; + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2); if ((mbxstatus == MBX_SUCCESS) && @@ -1537,25 +1540,25 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) before_fc_flag = phba->pport->fc_flag; sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn; - /* Disable SR-IOV virtual functions if enabled */ - if (phba->cfg_sriov_nr_virtfn) { - pci_disable_sriov(pdev); - phba->cfg_sriov_nr_virtfn = 0; - } + if (opcode == LPFC_FW_DUMP) { + init_completion(&online_compl); + phba->fw_dump_cmpl = &online_compl; + } else { + /* Disable SR-IOV virtual functions if enabled */ + if (phba->cfg_sriov_nr_virtfn) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + } - if (opcode == LPFC_FW_DUMP) - phba->hba_flag |= HBA_FW_DUMP_OP; + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); - status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + if (status != 0) + return status; - if (status != 0) { - phba->hba_flag &= ~HBA_FW_DUMP_OP; - return status; + /* wait for the device to be quiesced before firmware reset */ + msleep(100); } - /* wait for the device to be quiesced before firmware reset */ - msleep(100); - reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); @@ -1584,24 +1587,42 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "3153 Fail to perform the requested " "access: x%x\n", reg_val); + if (phba->fw_dump_cmpl) + phba->fw_dump_cmpl = NULL; return rc; } /* keep the original port state */ - if (before_fc_flag & FC_OFFLINE_MODE) - goto out; - - init_completion(&online_compl); - job_posted = lpfc_workq_post_event(phba, &status, &online_compl, - LPFC_EVT_ONLINE); - if (!job_posted) + if (before_fc_flag & FC_OFFLINE_MODE) { + if (phba->fw_dump_cmpl) + phba->fw_dump_cmpl = NULL; goto out; + } - wait_for_completion(&online_compl); + /* Firmware dump will trigger an HA_ERATT event, and + * lpfc_handle_eratt_s4 routine already handles bringing the port back + * online. + */ + if (opcode == LPFC_FW_DUMP) { + wait_for_completion(phba->fw_dump_cmpl); + } else { + init_completion(&online_compl); + job_posted = lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + if (!job_posted) + goto out; + wait_for_completion(&online_compl); + } out: /* in any case, restore the virtual functions enabled as before */ if (sriov_nr_virtfn) { + /* If fw_dump was performed, first disable to clean up */ + if (opcode == LPFC_FW_DUMP) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + } + sriov_err = lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn); if (!sriov_err) @@ -3821,8 +3842,8 @@ LPFC_ATTR_R(nvmet_mrq_post, * 3 - register both FCP and NVME * Supported values are [1,3]. Default value is 3 */ -LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH, - LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH, +LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE, + LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE, "Enable FC4 Protocol support - FCP / NVME"); /* diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 3c9248d2435e..e15bb3dfe995 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -2757,8 +2757,8 @@ lpfc_debugfs_nvmeio_trc_write(struct file *file, const char __user *buf, char mybuf[64]; char *pbuf; - if (nbytes > 64) - nbytes = 64; + if (nbytes > 63) + nbytes = 63; memset(mybuf, 0, sizeof(mybuf)); diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index 2040affa0887..9951d63a8b49 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1066,7 +1066,8 @@ stop_rr_fcf_flogi: /* FLOGI failed, so there is no fabric */ spin_lock_irq(shost->host_lock); - vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP); + vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP | + FC_PT2PT_NO_NVME); spin_unlock_irq(shost->host_lock); /* If private loop, then allow max outstanding els to be @@ -3740,6 +3741,23 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, /* Added for Vendor specifc support * Just keep retrying for these Rsn / Exp codes */ + if ((vport->fc_flag & FC_PT2PT) && + cmd == ELS_CMD_NVMEPRLI) { + switch (stat.un.b.lsRjtRsnCode) { + case LSRJT_UNABLE_TPC: + case LSRJT_INVALID_CMD: + case LSRJT_LOGICAL_ERR: + case LSRJT_CMD_UNSUPPORTED: + lpfc_printf_vlog(vport, KERN_WARNING, LOG_ELS, + "0168 NVME PRLI LS_RJT " + "reason %x port doesn't " + "support NVME, disabling NVME\n", + stat.un.b.lsRjtRsnCode); + retry = 0; + vport->fc_flag |= FC_PT2PT_NO_NVME; + goto out_retry; + } + } switch (stat.un.b.lsRjtRsnCode) { case LSRJT_UNABLE_TPC: /* The driver has a VALID PLOGI but the rport has diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 0dc1d56ff470..0abce779fbb1 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -628,10 +628,16 @@ lpfc_work_done(struct lpfc_hba *phba) if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) lpfc_sli4_post_async_mbox(phba); - if (ha_copy & HA_ERATT) + if (ha_copy & HA_ERATT) { /* Handle the error attention event */ lpfc_handle_eratt(phba); + if (phba->fw_dump_cmpl) { + complete(phba->fw_dump_cmpl); + phba->fw_dump_cmpl = NULL; + } + } + if (ha_copy & HA_MBATT) lpfc_sli_handle_mb_event(phba); diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index fdd87508c804..df2f7c3d7f84 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -1987,8 +1987,9 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, * is configured try it. */ ndlp->nlp_fc4_type |= NLP_FC4_FCP; - if ((vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH) || - (vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { + if ((!(vport->fc_flag & FC_PT2PT_NO_NVME)) && + (vport->cfg_enable_fc4_type == LPFC_ENABLE_BOTH || + vport->cfg_enable_fc4_type == LPFC_ENABLE_NVME)) { ndlp->nlp_fc4_type |= NLP_FC4_NVME; /* We need to update the localport also */ lpfc_nvme_update_localport(vport); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 4a7ceaa34341..bd908dd27307 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -4498,12 +4498,6 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba) phba->fcf.fcf_flag = 0; spin_unlock_irq(&phba->hbalock); - /* SLI4 INTF 2: if FW dump is being taken skip INIT_PORT */ - if (phba->hba_flag & HBA_FW_DUMP_OP) { - phba->hba_flag &= ~HBA_FW_DUMP_OP; - return rc; - } - /* Now physically reset the device */ lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "0389 Performing PCI function reset!\n"); @@ -19692,6 +19686,7 @@ lpfc_drain_txq(struct lpfc_hba *phba) fail_msg, piocbq->iotag, piocbq->sli4_xritag); list_add_tail(&piocbq->list, &completions); + fail_msg = NULL; } spin_unlock_irqrestore(&pring->ring_lock, iflags); } |