summaryrefslogtreecommitdiff
path: root/drivers/scsi/osst.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/osst.c')
-rw-r--r--drivers/scsi/osst.c6108
1 files changed, 0 insertions, 6108 deletions
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
deleted file mode 100644
index 815bb4097c1b..000000000000
--- a/drivers/scsi/osst.c
+++ /dev/null
@@ -1,6108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- SCSI Tape Driver for Linux version 1.1 and newer. See the accompanying
- file Documentation/scsi/st.txt for more information.
-
- History:
-
- OnStream SCSI Tape support (osst) cloned from st.c by
- Willem Riede (osst@riede.org) Feb 2000
- Fixes ... Kurt Garloff <garloff@suse.de> Mar 2000
-
- Rewritten from Dwayne Forsyth's SCSI tape driver by Kai Makisara.
- Contribution and ideas from several people including (in alphabetical
- order) Klaus Ehrenfried, Wolfgang Denk, Steve Hirsch, Andreas Koppenh"ofer,
- Michael Leodolter, Eyal Lebedinsky, J"org Weule, and Eric Youngdale.
-
- Copyright 1992 - 2002 Kai Makisara / 2000 - 2006 Willem Riede
- email osst@riede.org
-
- $Header: /cvsroot/osst/Driver/osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
-
- Microscopic alterations - Rik Ling, 2000/12/21
- Last st.c sync: Tue Oct 15 22:01:04 2002 by makisara
- Some small formal changes - aeb, 950809
-*/
-
-static const char * cvsid = "$Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $";
-static const char * osst_version = "0.99.4";
-
-/* The "failure to reconnect" firmware bug */
-#define OSST_FW_NEED_POLL_MIN 10601 /*(107A)*/
-#define OSST_FW_NEED_POLL_MAX 10704 /*(108D)*/
-#define OSST_FW_NEED_POLL(x,d) ((x) >= OSST_FW_NEED_POLL_MIN && (x) <= OSST_FW_NEED_POLL_MAX && d->host->this_id != 7)
-
-#include <linux/module.h>
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/sched/signal.h>
-#include <linux/proc_fs.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/mtio.h>
-#include <linux/ioctl.h>
-#include <linux/fcntl.h>
-#include <linux/spinlock.h>
-#include <linux/vmalloc.h>
-#include <linux/blkdev.h>
-#include <linux/moduleparam.h>
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-#include <asm/dma.h>
-
-/* The driver prints some debugging information on the console if DEBUG
- is defined and non-zero. */
-#define DEBUG 0
-
-/* The message level for the debug messages is currently set to KERN_NOTICE
- so that people can easily see the messages. Later when the debugging messages
- in the drivers are more widely classified, this may be changed to KERN_DEBUG. */
-#define OSST_DEB_MSG KERN_NOTICE
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_driver.h>
-#include <scsi/scsi_eh.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_ioctl.h>
-
-#define ST_KILOBYTE 1024
-
-#include "st.h"
-#include "osst.h"
-#include "osst_options.h"
-#include "osst_detect.h"
-
-static DEFINE_MUTEX(osst_int_mutex);
-static int max_dev = 0;
-static int write_threshold_kbs = 0;
-static int max_sg_segs = 0;
-
-#ifdef MODULE
-MODULE_AUTHOR("Willem Riede");
-MODULE_DESCRIPTION("OnStream {DI-|FW-|SC-|USB}{30|50} Tape Driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR);
-MODULE_ALIAS_SCSI_DEVICE(TYPE_TAPE);
-
-module_param(max_dev, int, 0444);
-MODULE_PARM_DESC(max_dev, "Maximum number of OnStream Tape Drives to attach (4)");
-
-module_param(write_threshold_kbs, int, 0644);
-MODULE_PARM_DESC(write_threshold_kbs, "Asynchronous write threshold (KB; 32)");
-
-module_param(max_sg_segs, int, 0644);
-MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (9)");
-#else
-static struct osst_dev_parm {
- char *name;
- int *val;
-} parms[] __initdata = {
- { "max_dev", &max_dev },
- { "write_threshold_kbs", &write_threshold_kbs },
- { "max_sg_segs", &max_sg_segs }
-};
-#endif
-
-/* Some default definitions have been moved to osst_options.h */
-#define OSST_BUFFER_SIZE (OSST_BUFFER_BLOCKS * ST_KILOBYTE)
-#define OSST_WRITE_THRESHOLD (OSST_WRITE_THRESHOLD_BLOCKS * ST_KILOBYTE)
-
-/* The buffer size should fit into the 24 bits for length in the
- 6-byte SCSI read and write commands. */
-#if OSST_BUFFER_SIZE >= (2 << 24 - 1)
-#error "Buffer size should not exceed (2 << 24 - 1) bytes!"
-#endif
-
-#if DEBUG
-static int debugging = 1;
-/* uncomment define below to test error recovery */
-// #define OSST_INJECT_ERRORS 1
-#endif
-
-/* Do not retry! The drive firmware already retries when appropriate,
- and when it tries to tell us something, we had better listen... */
-#define MAX_RETRIES 0
-
-#define NO_TAPE NOT_READY
-
-#define OSST_WAIT_POSITION_COMPLETE (HZ > 200 ? HZ / 200 : 1)
-#define OSST_WAIT_WRITE_COMPLETE (HZ / 12)
-#define OSST_WAIT_LONG_WRITE_COMPLETE (HZ / 2)
-
-#define OSST_TIMEOUT (200 * HZ)
-#define OSST_LONG_TIMEOUT (1800 * HZ)
-
-#define TAPE_NR(x) (iminor(x) & ((1 << ST_MODE_SHIFT)-1))
-#define TAPE_MODE(x) ((iminor(x) & ST_MODE_MASK) >> ST_MODE_SHIFT)
-#define TAPE_REWIND(x) ((iminor(x) & 0x80) == 0)
-#define TAPE_IS_RAW(x) (TAPE_MODE(x) & (ST_NBR_MODES >> 1))
-
-/* Internal ioctl to set both density (uppermost 8 bits) and blocksize (lower
- 24 bits) */
-#define SET_DENS_AND_BLK 0x10001
-
-static int osst_buffer_size = OSST_BUFFER_SIZE;
-static int osst_write_threshold = OSST_WRITE_THRESHOLD;
-static int osst_max_sg_segs = OSST_MAX_SG;
-static int osst_max_dev = OSST_MAX_TAPES;
-static int osst_nr_dev;
-
-static struct osst_tape **os_scsi_tapes = NULL;
-static DEFINE_RWLOCK(os_scsi_tapes_lock);
-
-static int modes_defined = 0;
-
-static struct osst_buffer *new_tape_buffer(int, int, int);
-static int enlarge_buffer(struct osst_buffer *, int);
-static void normalize_buffer(struct osst_buffer *);
-static int append_to_buffer(const char __user *, struct osst_buffer *, int);
-static int from_buffer(struct osst_buffer *, char __user *, int);
-static int osst_zero_buffer_tail(struct osst_buffer *);
-static int osst_copy_to_buffer(struct osst_buffer *, unsigned char *);
-static int osst_copy_from_buffer(struct osst_buffer *, unsigned char *);
-
-static int osst_probe(struct device *);
-static int osst_remove(struct device *);
-
-static struct scsi_driver osst_template = {
- .gendrv = {
- .name = "osst",
- .owner = THIS_MODULE,
- .probe = osst_probe,
- .remove = osst_remove,
- }
-};
-
-static int osst_int_ioctl(struct osst_tape *STp, struct osst_request ** aSRpnt,
- unsigned int cmd_in, unsigned long arg);
-
-static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int frame, int skip);
-
-static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt);
-
-static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt);
-
-static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending);
-
-static inline char *tape_name(struct osst_tape *tape)
-{
- return tape->drive->disk_name;
-}
-
-/* Routines that handle the interaction with mid-layer SCSI routines */
-
-
-/* Normalize Sense */
-static void osst_analyze_sense(struct osst_request *SRpnt, struct st_cmdstatus *s)
-{
- const u8 *ucp;
- const u8 *sense = SRpnt->sense;
-
- s->have_sense = scsi_normalize_sense(SRpnt->sense,
- SCSI_SENSE_BUFFERSIZE, &s->sense_hdr);
- s->flags = 0;
-
- if (s->have_sense) {
- s->deferred = 0;
- s->remainder_valid =
- scsi_get_sense_info_fld(sense, SCSI_SENSE_BUFFERSIZE, &s->uremainder64);
- switch (sense[0] & 0x7f) {
- case 0x71:
- s->deferred = 1;
- /* fall through */
- case 0x70:
- s->fixed_format = 1;
- s->flags = sense[2] & 0xe0;
- break;
- case 0x73:
- s->deferred = 1;
- /* fall through */
- case 0x72:
- s->fixed_format = 0;
- ucp = scsi_sense_desc_find(sense, SCSI_SENSE_BUFFERSIZE, 4);
- s->flags = ucp ? (ucp[3] & 0xe0) : 0;
- break;
- }
- }
-}
-
-/* Convert the result to success code */
-static int osst_chk_result(struct osst_tape * STp, struct osst_request * SRpnt)
-{
- char *name = tape_name(STp);
- int result = SRpnt->result;
- u8 * sense = SRpnt->sense, scode;
-#if DEBUG
- const char *stp;
-#endif
- struct st_cmdstatus *cmdstatp;
-
- if (!result)
- return 0;
-
- cmdstatp = &STp->buffer->cmdstat;
- osst_analyze_sense(SRpnt, cmdstatp);
-
- if (cmdstatp->have_sense)
- scode = STp->buffer->cmdstat.sense_hdr.sense_key;
- else
- scode = 0;
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG "%s:D: Error: %x, cmd: %x %x %x %x %x %x\n",
- name, result,
- SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
- SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
- if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n",
- name, scode, sense[12], sense[13]);
- if (cmdstatp->have_sense)
- __scsi_print_sense(STp->device, name,
- SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
- }
- else
-#endif
- if (cmdstatp->have_sense && (
- scode != NO_SENSE &&
- scode != RECOVERED_ERROR &&
-/* scode != UNIT_ATTENTION && */
- scode != BLANK_CHECK &&
- scode != VOLUME_OVERFLOW &&
- SRpnt->cmd[0] != MODE_SENSE &&
- SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */
- if (cmdstatp->have_sense) {
- printk(KERN_WARNING "%s:W: Command with sense data:\n", name);
- __scsi_print_sense(STp->device, name,
- SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
- }
- else {
- static int notyetprinted = 1;
-
- printk(KERN_WARNING
- "%s:W: Warning %x (driver bt 0x%x, host bt 0x%x).\n",
- name, result, driver_byte(result),
- host_byte(result));
- if (notyetprinted) {
- notyetprinted = 0;
- printk(KERN_INFO
- "%s:I: This warning may be caused by your scsi controller,\n", name);
- printk(KERN_INFO
- "%s:I: it has been reported with some Buslogic cards.\n", name);
- }
- }
- }
- STp->pos_unknown |= STp->device->was_reset;
-
- if (cmdstatp->have_sense && scode == RECOVERED_ERROR) {
- STp->recover_count++;
- STp->recover_erreg++;
-#if DEBUG
- if (debugging) {
- if (SRpnt->cmd[0] == READ_6)
- stp = "read";
- else if (SRpnt->cmd[0] == WRITE_6)
- stp = "write";
- else
- stp = "ioctl";
- printk(OSST_DEB_MSG "%s:D: Recovered %s error (%d).\n", name, stp,
- STp->recover_count);
- }
-#endif
- if ((sense[2] & 0xe0) == 0)
- return 0;
- }
- return (-EIO);
-}
-
-
-/* Wakeup from interrupt */
-static void osst_end_async(struct request *req, blk_status_t status)
-{
- struct scsi_request *rq = scsi_req(req);
- struct osst_request *SRpnt = req->end_io_data;
- struct osst_tape *STp = SRpnt->stp;
- struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
-
- STp->buffer->cmdstat.midlevel_result = SRpnt->result = rq->result;
-#if DEBUG
- STp->write_pending = 0;
-#endif
- if (rq->sense_len)
- memcpy(SRpnt->sense, rq->sense, SCSI_SENSE_BUFFERSIZE);
- if (SRpnt->waiting)
- complete(SRpnt->waiting);
-
- if (SRpnt->bio) {
- kfree(mdata->pages);
- blk_rq_unmap_user(SRpnt->bio);
- }
-
- blk_put_request(req);
-}
-
-/* osst_request memory management */
-static struct osst_request *osst_allocate_request(void)
-{
- return kzalloc(sizeof(struct osst_request), GFP_KERNEL);
-}
-
-static void osst_release_request(struct osst_request *streq)
-{
- kfree(streq);
-}
-
-static int osst_execute(struct osst_request *SRpnt, const unsigned char *cmd,
- int cmd_len, int data_direction, void *buffer, unsigned bufflen,
- int use_sg, int timeout, int retries)
-{
- struct request *req;
- struct scsi_request *rq;
- struct page **pages = NULL;
- struct rq_map_data *mdata = &SRpnt->stp->buffer->map_data;
-
- int err = 0;
- int write = (data_direction == DMA_TO_DEVICE);
-
- req = blk_get_request(SRpnt->stp->device->request_queue,
- write ? REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0);
- if (IS_ERR(req))
- return DRIVER_ERROR << 24;
-
- rq = scsi_req(req);
- req->rq_flags |= RQF_QUIET;
-
- SRpnt->bio = NULL;
-
- if (use_sg) {
- struct scatterlist *sg, *sgl = (struct scatterlist *)buffer;
- int i;
-
- pages = kcalloc(use_sg, sizeof(struct page *), GFP_KERNEL);
- if (!pages)
- goto free_req;
-
- for_each_sg(sgl, sg, use_sg, i)
- pages[i] = sg_page(sg);
-
- mdata->null_mapped = 1;
-
- mdata->page_order = get_order(sgl[0].length);
- mdata->nr_entries =
- DIV_ROUND_UP(bufflen, PAGE_SIZE << mdata->page_order);
- mdata->offset = 0;
-
- err = blk_rq_map_user(req->q, req, mdata, NULL, bufflen, GFP_KERNEL);
- if (err) {
- kfree(pages);
- goto free_req;
- }
- SRpnt->bio = req->bio;
- mdata->pages = pages;
-
- } else if (bufflen) {
- err = blk_rq_map_kern(req->q, req, buffer, bufflen, GFP_KERNEL);
- if (err)
- goto free_req;
- }
-
- rq->cmd_len = cmd_len;
- memset(rq->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
- memcpy(rq->cmd, cmd, rq->cmd_len);
- req->timeout = timeout;
- rq->retries = retries;
- req->end_io_data = SRpnt;
-
- blk_execute_rq_nowait(req->q, NULL, req, 1, osst_end_async);
- return 0;
-free_req:
- blk_put_request(req);
- return DRIVER_ERROR << 24;
-}
-
-/* Do the scsi command. Waits until command performed if do_wait is true.
- Otherwise osst_write_behind_check() is used to check that the command
- has finished. */
-static struct osst_request * osst_do_scsi(struct osst_request *SRpnt, struct osst_tape *STp,
- unsigned char *cmd, int bytes, int direction, int timeout, int retries, int do_wait)
-{
- unsigned char *bp;
- unsigned short use_sg;
-#ifdef OSST_INJECT_ERRORS
- static int inject = 0;
- static int repeat = 0;
-#endif
- struct completion *waiting;
-
- /* if async, make sure there's no command outstanding */
- if (!do_wait && ((STp->buffer)->last_SRpnt)) {
- printk(KERN_ERR "%s: Async command already active.\n",
- tape_name(STp));
- if (signal_pending(current))
- (STp->buffer)->syscall_result = (-EINTR);
- else
- (STp->buffer)->syscall_result = (-EBUSY);
- return NULL;
- }
-
- if (SRpnt == NULL) {
- SRpnt = osst_allocate_request();
- if (SRpnt == NULL) {
- printk(KERN_ERR "%s: Can't allocate SCSI request.\n",
- tape_name(STp));
- if (signal_pending(current))
- (STp->buffer)->syscall_result = (-EINTR);
- else
- (STp->buffer)->syscall_result = (-EBUSY);
- return NULL;
- }
- SRpnt->stp = STp;
- }
-
- /* If async IO, set last_SRpnt. This ptr tells write_behind_check
- which IO is outstanding. It's nulled out when the IO completes. */
- if (!do_wait)
- (STp->buffer)->last_SRpnt = SRpnt;
-
- waiting = &STp->wait;
- init_completion(waiting);
- SRpnt->waiting = waiting;
-
- use_sg = (bytes > STp->buffer->sg[0].length) ? STp->buffer->use_sg : 0;
- if (use_sg) {
- bp = (char *)&(STp->buffer->sg[0]);
- if (STp->buffer->sg_segs < use_sg)
- use_sg = STp->buffer->sg_segs;
- }
- else
- bp = (STp->buffer)->b_data;
-
- memcpy(SRpnt->cmd, cmd, sizeof(SRpnt->cmd));
- STp->buffer->cmdstat.have_sense = 0;
- STp->buffer->syscall_result = 0;
-
- if (osst_execute(SRpnt, cmd, COMMAND_SIZE(cmd[0]), direction, bp, bytes,
- use_sg, timeout, retries))
- /* could not allocate the buffer or request was too large */
- (STp->buffer)->syscall_result = (-EBUSY);
- else if (do_wait) {
- wait_for_completion(waiting);
- SRpnt->waiting = NULL;
- STp->buffer->syscall_result = osst_chk_result(STp, SRpnt);
-#ifdef OSST_INJECT_ERRORS
- if (STp->buffer->syscall_result == 0 &&
- cmd[0] == READ_6 &&
- cmd[4] &&
- ( (++ inject % 83) == 29 ||
- (STp->first_frame_position == 240
- /* or STp->read_error_frame to fail again on the block calculated above */ &&
- ++repeat < 3))) {
- printk(OSST_DEB_MSG "%s:D: Injecting read error\n", tape_name(STp));
- STp->buffer->last_result_fatal = 1;
- }
-#endif
- }
- return SRpnt;
-}
-
-
-/* Handle the write-behind checking (downs the semaphore) */
-static void osst_write_behind_check(struct osst_tape *STp)
-{
- struct osst_buffer * STbuffer;
-
- STbuffer = STp->buffer;
-
-#if DEBUG
- if (STp->write_pending)
- STp->nbr_waits++;
- else
- STp->nbr_finished++;
-#endif
- wait_for_completion(&(STp->wait));
- STp->buffer->last_SRpnt->waiting = NULL;
-
- STp->buffer->syscall_result = osst_chk_result(STp, STp->buffer->last_SRpnt);
-
- if (STp->buffer->syscall_result)
- STp->buffer->syscall_result =
- osst_write_error_recovery(STp, &(STp->buffer->last_SRpnt), 1);
- else
- STp->first_frame_position++;
-
- osst_release_request(STp->buffer->last_SRpnt);
-
- if (STbuffer->writing < STbuffer->buffer_bytes)
- printk(KERN_WARNING "osst :A: write_behind_check: something left in buffer!\n");
-
- STbuffer->last_SRpnt = NULL;
- STbuffer->buffer_bytes -= STbuffer->writing;
- STbuffer->writing = 0;
-
- return;
-}
-
-
-
-/* Onstream specific Routines */
-/*
- * Initialize the OnStream AUX
- */
-static void osst_init_aux(struct osst_tape * STp, int frame_type, int frame_seq_number,
- int logical_blk_num, int blk_sz, int blk_cnt)
-{
- os_aux_t *aux = STp->buffer->aux;
- os_partition_t *par = &aux->partition;
- os_dat_t *dat = &aux->dat;
-
- if (STp->raw) return;
-
- memset(aux, 0, sizeof(*aux));
- aux->format_id = htonl(0);
- memcpy(aux->application_sig, "LIN4", 4);
- aux->hdwr = htonl(0);
- aux->frame_type = frame_type;
-
- switch (frame_type) {
- case OS_FRAME_TYPE_HEADER:
- aux->update_frame_cntr = htonl(STp->update_frame_cntr);
- par->partition_num = OS_CONFIG_PARTITION;
- par->par_desc_ver = OS_PARTITION_VERSION;
- par->wrt_pass_cntr = htons(0xffff);
- /* 0-4 = reserved, 5-9 = header, 2990-2994 = header, 2995-2999 = reserved */
- par->first_frame_ppos = htonl(0);
- par->last_frame_ppos = htonl(0xbb7);
- aux->frame_seq_num = htonl(0);
- aux->logical_blk_num_high = htonl(0);
- aux->logical_blk_num = htonl(0);
- aux->next_mark_ppos = htonl(STp->first_mark_ppos);
- break;
- case OS_FRAME_TYPE_DATA:
- case OS_FRAME_TYPE_MARKER:
- dat->dat_sz = 8;
- dat->reserved1 = 0;
- dat->entry_cnt = 1;
- dat->reserved3 = 0;
- dat->dat_list[0].blk_sz = htonl(blk_sz);
- dat->dat_list[0].blk_cnt = htons(blk_cnt);
- dat->dat_list[0].flags = frame_type==OS_FRAME_TYPE_MARKER?
- OS_DAT_FLAGS_MARK:OS_DAT_FLAGS_DATA;
- dat->dat_list[0].reserved = 0;
- /* fall through */
- case OS_FRAME_TYPE_EOD:
- aux->update_frame_cntr = htonl(0);
- par->partition_num = OS_DATA_PARTITION;
- par->par_desc_ver = OS_PARTITION_VERSION;
- par->wrt_pass_cntr = htons(STp->wrt_pass_cntr);
- par->first_frame_ppos = htonl(STp->first_data_ppos);
- par->last_frame_ppos = htonl(STp->capacity);
- aux->frame_seq_num = htonl(frame_seq_number);
- aux->logical_blk_num_high = htonl(0);
- aux->logical_blk_num = htonl(logical_blk_num);
- break;
- default: ; /* probably FILL */
- }
- aux->filemark_cnt = htonl(STp->filemark_cnt);
- aux->phys_fm = htonl(0xffffffff);
- aux->last_mark_ppos = htonl(STp->last_mark_ppos);
- aux->last_mark_lbn = htonl(STp->last_mark_lbn);
-}
-
-/*
- * Verify that we have the correct tape frame
- */
-static int osst_verify_frame(struct osst_tape * STp, int frame_seq_number, int quiet)
-{
- char * name = tape_name(STp);
- os_aux_t * aux = STp->buffer->aux;
- os_partition_t * par = &(aux->partition);
- struct st_partstat * STps = &(STp->ps[STp->partition]);
- unsigned int blk_cnt, blk_sz, i;
-
- if (STp->raw) {
- if (STp->buffer->syscall_result) {
- for (i=0; i < STp->buffer->sg_segs; i++)
- memset(page_address(sg_page(&STp->buffer->sg[i])),
- 0, STp->buffer->sg[i].length);
- strcpy(STp->buffer->b_data, "READ ERROR ON FRAME");
- } else
- STp->buffer->buffer_bytes = OS_FRAME_SIZE;
- return 1;
- }
- if (STp->buffer->syscall_result) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, read error\n", name);
-#endif
- return 0;
- }
- if (ntohl(aux->format_id) != 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, format_id %u\n", name, ntohl(aux->format_id));
-#endif
- goto err_out;
- }
- if (memcmp(aux->application_sig, STp->application_sig, 4) != 0 &&
- (memcmp(aux->application_sig, "LIN3", 4) != 0 || STp->linux_media_version != 4)) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, incorrect application signature\n", name);
-#endif
- goto err_out;
- }
- if (par->partition_num != OS_DATA_PARTITION) {
- if (!STp->linux_media || STp->linux_media_version != 2) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, partition num %d\n",
- name, par->partition_num);
-#endif
- goto err_out;
- }
- }
- if (par->par_desc_ver != OS_PARTITION_VERSION) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, partition version %d\n", name, par->par_desc_ver);
-#endif
- goto err_out;
- }
- if (ntohs(par->wrt_pass_cntr) != STp->wrt_pass_cntr) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, wrt_pass_cntr %d (expected %d)\n",
- name, ntohs(par->wrt_pass_cntr), STp->wrt_pass_cntr);
-#endif
- goto err_out;
- }
- if (aux->frame_type != OS_FRAME_TYPE_DATA &&
- aux->frame_type != OS_FRAME_TYPE_EOD &&
- aux->frame_type != OS_FRAME_TYPE_MARKER) {
- if (!quiet) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, frame type %x\n", name, aux->frame_type);
-#endif
- }
- goto err_out;
- }
- if (aux->frame_type == OS_FRAME_TYPE_EOD &&
- STp->first_frame_position < STp->eod_frame_ppos) {
- printk(KERN_INFO "%s:I: Skipping premature EOD frame %d\n", name,
- STp->first_frame_position);
- goto err_out;
- }
- if (frame_seq_number != -1 && ntohl(aux->frame_seq_num) != frame_seq_number) {
- if (!quiet) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame, sequence number %u (expected %d)\n",
- name, ntohl(aux->frame_seq_num), frame_seq_number);
-#endif
- }
- goto err_out;
- }
- if (aux->frame_type == OS_FRAME_TYPE_MARKER) {
- STps->eof = ST_FM_HIT;
-
- i = ntohl(aux->filemark_cnt);
- if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt ||
- STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: %s filemark %d at frame pos %d\n", name,
- STp->header_cache->dat_fm_tab.fm_tab_ent[i] == 0?"Learned":"Corrected",
- i, STp->first_frame_position - 1);
-#endif
- STp->header_cache->dat_fm_tab.fm_tab_ent[i] = htonl(STp->first_frame_position - 1);
- if (i >= STp->filemark_cnt)
- STp->filemark_cnt = i+1;
- }
- }
- if (aux->frame_type == OS_FRAME_TYPE_EOD) {
- STps->eof = ST_EOD_1;
- STp->frame_in_buffer = 1;
- }
- if (aux->frame_type == OS_FRAME_TYPE_DATA) {
- blk_cnt = ntohs(aux->dat.dat_list[0].blk_cnt);
- blk_sz = ntohl(aux->dat.dat_list[0].blk_sz);
- STp->buffer->buffer_bytes = blk_cnt * blk_sz;
- STp->buffer->read_pointer = 0;
- STp->frame_in_buffer = 1;
-
- /* See what block size was used to write file */
- if (STp->block_size != blk_sz && blk_sz > 0) {
- printk(KERN_INFO
- "%s:I: File was written with block size %d%c, currently %d%c, adjusted to match.\n",
- name, blk_sz<1024?blk_sz:blk_sz/1024,blk_sz<1024?'b':'k',
- STp->block_size<1024?STp->block_size:STp->block_size/1024,
- STp->block_size<1024?'b':'k');
- STp->block_size = blk_sz;
- STp->buffer->buffer_blocks = OS_DATA_SIZE / blk_sz;
- }
- STps->eof = ST_NOEOF;
- }
- STp->frame_seq_number = ntohl(aux->frame_seq_num);
- STp->logical_blk_num = ntohl(aux->logical_blk_num);
- return 1;
-
-err_out:
- if (STp->read_error_frame == 0)
- STp->read_error_frame = STp->first_frame_position - 1;
- return 0;
-}
-
-/*
- * Wait for the unit to become Ready
- */
-static int osst_wait_ready(struct osst_tape * STp, struct osst_request ** aSRpnt,
- unsigned timeout, int initial_delay)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- unsigned long startwait = jiffies;
-#if DEBUG
- int dbg = debugging;
- char * name = tape_name(STp);
-
- printk(OSST_DEB_MSG "%s:D: Reached onstream wait ready\n", name);
-#endif
-
- if (initial_delay > 0)
- msleep(jiffies_to_msecs(initial_delay));
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
- *aSRpnt = SRpnt;
- if (!SRpnt) return (-EBUSY);
-
- while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
- (( SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 &&
- (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8) ) ||
- ( SRpnt->sense[2] == 6 && SRpnt->sense[12] == 0x28 &&
- SRpnt->sense[13] == 0 ) )) {
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait ready\n", name);
- printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
- debugging = 0;
- }
-#endif
- msleep(100);
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
- }
- *aSRpnt = SRpnt;
-#if DEBUG
- debugging = dbg;
-#endif
- if ( STp->buffer->syscall_result &&
- osst_write_error_recovery(STp, aSRpnt, 0) ) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait ready\n", name);
- printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
- STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
- SRpnt->sense[12], SRpnt->sense[13]);
-#endif
- return (-EIO);
- }
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait ready\n", name);
-#endif
- return 0;
-}
-
-/*
- * Wait for a tape to be inserted in the unit
- */
-static int osst_wait_for_medium(struct osst_tape * STp, struct osst_request ** aSRpnt, unsigned timeout)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- unsigned long startwait = jiffies;
-#if DEBUG
- int dbg = debugging;
- char * name = tape_name(STp);
-
- printk(OSST_DEB_MSG "%s:D: Reached onstream wait for medium\n", name);
-#endif
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
- *aSRpnt = SRpnt;
- if (!SRpnt) return (-EBUSY);
-
- while ( STp->buffer->syscall_result && time_before(jiffies, startwait + timeout*HZ) &&
- SRpnt->sense[2] == 2 && SRpnt->sense[12] == 0x3a && SRpnt->sense[13] == 0 ) {
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG "%s:D: Sleeping in onstream wait medium\n", name);
- printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
- debugging = 0;
- }
-#endif
- msleep(100);
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
- }
- *aSRpnt = SRpnt;
-#if DEBUG
- debugging = dbg;
-#endif
- if ( STp->buffer->syscall_result && SRpnt->sense[2] != 2 &&
- SRpnt->sense[12] != 4 && SRpnt->sense[13] == 1) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Abnormal exit from onstream wait medium\n", name);
- printk(OSST_DEB_MSG "%s:D: Result = %d, Sense: 0=%02x, 2=%02x, 12=%02x, 13=%02x\n", name,
- STp->buffer->syscall_result, SRpnt->sense[0], SRpnt->sense[2],
- SRpnt->sense[12], SRpnt->sense[13]);
-#endif
- return 0;
- }
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Normal exit from onstream wait medium\n", name);
-#endif
- return 1;
-}
-
-static int osst_position_tape_and_confirm(struct osst_tape * STp, struct osst_request ** aSRpnt, int frame)
-{
- int retval;
-
- osst_wait_ready(STp, aSRpnt, 15 * 60, 0); /* TODO - can this catch a write error? */
- retval = osst_set_frame_position(STp, aSRpnt, frame, 0);
- if (retval) return (retval);
- osst_wait_ready(STp, aSRpnt, 15 * 60, OSST_WAIT_POSITION_COMPLETE);
- return (osst_get_frame_position(STp, aSRpnt));
-}
-
-/*
- * Wait for write(s) to complete
- */
-static int osst_flush_drive_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- int result = 0;
- int delay = OSST_WAIT_WRITE_COMPLETE;
-#if DEBUG
- char * name = tape_name(STp);
-
- printk(OSST_DEB_MSG "%s:D: Reached onstream flush drive buffer (write filemark)\n", name);
-#endif
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = WRITE_FILEMARKS;
- cmd[1] = 1;
-
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
- *aSRpnt = SRpnt;
- if (!SRpnt) return (-EBUSY);
- if (STp->buffer->syscall_result) {
- if ((SRpnt->sense[2] & 0x0f) == 2 && SRpnt->sense[12] == 4) {
- if (SRpnt->sense[13] == 8) {
- delay = OSST_WAIT_LONG_WRITE_COMPLETE;
- }
- } else
- result = osst_write_error_recovery(STp, aSRpnt, 0);
- }
- result |= osst_wait_ready(STp, aSRpnt, 5 * 60, delay);
- STp->ps[STp->partition].rw = OS_WRITING_COMPLETE;
-
- return (result);
-}
-
-#define OSST_POLL_PER_SEC 10
-static int osst_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int curr, int minlast, int to)
-{
- unsigned long startwait = jiffies;
- char * name = tape_name(STp);
-#if DEBUG
- char notyetprinted = 1;
-#endif
- if (minlast >= 0 && STp->ps[STp->partition].rw != ST_READING)
- printk(KERN_ERR "%s:A: Waiting for frame without having initialized read!\n", name);
-
- while (time_before (jiffies, startwait + to*HZ))
- {
- int result;
- result = osst_get_frame_position(STp, aSRpnt);
- if (result == -EIO)
- if ((result = osst_write_error_recovery(STp, aSRpnt, 0)) == 0)
- return 0; /* successful recovery leaves drive ready for frame */
- if (result < 0) break;
- if (STp->first_frame_position == curr &&
- ((minlast < 0 &&
- (signed)STp->last_frame_position > (signed)curr + minlast) ||
- (minlast >= 0 && STp->cur_frames > minlast)
- ) && result >= 0)
- {
-#if DEBUG
- if (debugging || time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC))
- printk (OSST_DEB_MSG
- "%s:D: Succ wait f fr %i (>%i): %i-%i %i (%i): %3li.%li s\n",
- name, curr, curr+minlast, STp->first_frame_position,
- STp->last_frame_position, STp->cur_frames,
- result, (jiffies-startwait)/HZ,
- (((jiffies-startwait)%HZ)*10)/HZ);
-#endif
- return 0;
- }
-#if DEBUG
- if (time_after_eq(jiffies, startwait + 2*HZ/OSST_POLL_PER_SEC) && notyetprinted)
- {
- printk (OSST_DEB_MSG "%s:D: Wait for frame %i (>%i): %i-%i %i (%i)\n",
- name, curr, curr+minlast, STp->first_frame_position,
- STp->last_frame_position, STp->cur_frames, result);
- notyetprinted--;
- }
-#endif
- msleep(1000 / OSST_POLL_PER_SEC);
- }
-#if DEBUG
- printk (OSST_DEB_MSG "%s:D: Fail wait f fr %i (>%i): %i-%i %i: %3li.%li s\n",
- name, curr, curr+minlast, STp->first_frame_position,
- STp->last_frame_position, STp->cur_frames,
- (jiffies-startwait)/HZ, (((jiffies-startwait)%HZ)*10)/HZ);
-#endif
- return -EBUSY;
-}
-
-static int osst_recover_wait_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int writing)
-{
- struct osst_request * SRpnt;
- unsigned char cmd[MAX_COMMAND_SIZE];
- unsigned long startwait = jiffies;
- int retval = 1;
- char * name = tape_name(STp);
-
- if (writing) {
- char mybuf[24];
- char * olddata = STp->buffer->b_data;
- int oldsize = STp->buffer->buffer_size;
-
- /* write zero fm then read pos - if shows write error, try to recover - if no progress, wait */
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = WRITE_FILEMARKS;
- cmd[1] = 1;
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
- MAX_RETRIES, 1);
-
- while (retval && time_before (jiffies, startwait + 5*60*HZ)) {
-
- if (STp->buffer->syscall_result && (SRpnt->sense[2] & 0x0f) != 2) {
-
- /* some failure - not just not-ready */
- retval = osst_write_error_recovery(STp, aSRpnt, 0);
- break;
- }
- schedule_timeout_interruptible(HZ / OSST_POLL_PER_SEC);
-
- STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = READ_POSITION;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 20, DMA_FROM_DEVICE, STp->timeout,
- MAX_RETRIES, 1);
-
- retval = ( STp->buffer->syscall_result || (STp->buffer)->b_data[15] > 25 );
- STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
- }
- if (retval)
- printk(KERN_ERR "%s:E: Device did not succeed to write buffered data\n", name);
- } else
- /* TODO - figure out which error conditions can be handled */
- if (STp->buffer->syscall_result)
- printk(KERN_WARNING
- "%s:W: Recover_wait_frame(read) cannot handle %02x:%02x:%02x\n", name,
- (*aSRpnt)->sense[ 2] & 0x0f,
- (*aSRpnt)->sense[12],
- (*aSRpnt)->sense[13]);
-
- return retval;
-}
-
-/*
- * Read the next OnStream tape frame at the current location
- */
-static int osst_read_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int timeout)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- int retval = 0;
-#if DEBUG
- os_aux_t * aux = STp->buffer->aux;
- char * name = tape_name(STp);
-#endif
-
- if (STp->poll)
- if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, 0, timeout))
- retval = osst_recover_wait_frame(STp, aSRpnt, 0);
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = READ_6;
- cmd[1] = 1;
- cmd[4] = 1;
-
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Reading frame from OnStream tape\n", name);
-#endif
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
- STp->timeout, MAX_RETRIES, 1);
- *aSRpnt = SRpnt;
- if (!SRpnt)
- return (-EBUSY);
-
- if ((STp->buffer)->syscall_result) {
- retval = 1;
- if (STp->read_error_frame == 0) {
- STp->read_error_frame = STp->first_frame_position;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Recording read error at %d\n", name, STp->read_error_frame);
-#endif
- }
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Sense: %2x %2x %2x %2x %2x %2x %2x %2x\n",
- name,
- SRpnt->sense[0], SRpnt->sense[1],
- SRpnt->sense[2], SRpnt->sense[3],
- SRpnt->sense[4], SRpnt->sense[5],
- SRpnt->sense[6], SRpnt->sense[7]);
-#endif
- }
- else
- STp->first_frame_position++;
-#if DEBUG
- if (debugging) {
- char sig[8]; int i;
- for (i=0;i<4;i++)
- sig[i] = aux->application_sig[i]<32?'^':aux->application_sig[i];
- sig[4] = '\0';
- printk(OSST_DEB_MSG
- "%s:D: AUX: %s UpdFrCt#%d Wpass#%d %s FrSeq#%d LogBlk#%d Qty=%d Sz=%d\n", name, sig,
- ntohl(aux->update_frame_cntr), ntohs(aux->partition.wrt_pass_cntr),
- aux->frame_type==1?"EOD":aux->frame_type==2?"MARK":
- aux->frame_type==8?"HEADR":aux->frame_type==0x80?"DATA":"FILL",
- ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
- ntohs(aux->dat.dat_list[0].blk_cnt), ntohl(aux->dat.dat_list[0].blk_sz) );
- if (aux->frame_type==2)
- printk(OSST_DEB_MSG "%s:D: mark_cnt=%d, last_mark_ppos=%d, last_mark_lbn=%d\n", name,
- ntohl(aux->filemark_cnt), ntohl(aux->last_mark_ppos), ntohl(aux->last_mark_lbn));
- printk(OSST_DEB_MSG "%s:D: Exit read frame from OnStream tape with code %d\n", name, retval);
- }
-#endif
- return (retval);
-}
-
-static int osst_initiate_read(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- struct st_partstat * STps = &(STp->ps[STp->partition]);
- struct osst_request * SRpnt ;
- unsigned char cmd[MAX_COMMAND_SIZE];
- int retval = 0;
- char * name = tape_name(STp);
-
- if (STps->rw != ST_READING) { /* Initialize read operation */
- if (STps->rw == ST_WRITING || STp->dirty) {
- STp->write_type = OS_WRITE_DATA;
- osst_flush_write_buffer(STp, aSRpnt);
- osst_flush_drive_buffer(STp, aSRpnt);
- }
- STps->rw = ST_READING;
- STp->frame_in_buffer = 0;
-
- /*
- * Issue a read 0 command to get the OnStream drive
- * read frames into its buffer.
- */
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = READ_6;
- cmd[1] = 1;
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Start Read Ahead on OnStream tape\n", name);
-#endif
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
- *aSRpnt = SRpnt;
- if ((retval = STp->buffer->syscall_result))
- printk(KERN_WARNING "%s:W: Error starting read ahead\n", name);
- }
-
- return retval;
-}
-
-static int osst_get_logical_frame(struct osst_tape * STp, struct osst_request ** aSRpnt,
- int frame_seq_number, int quiet)
-{
- struct st_partstat * STps = &(STp->ps[STp->partition]);
- char * name = tape_name(STp);
- int cnt = 0,
- bad = 0,
- past = 0,
- x,
- position;
-
- /*
- * If we want just any frame (-1) and there is a frame in the buffer, return it
- */
- if (frame_seq_number == -1 && STp->frame_in_buffer) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Frame %d still in buffer\n", name, STp->frame_seq_number);
-#endif
- return (STps->eof);
- }
- /*
- * Search and wait for the next logical tape frame
- */
- while (1) {
- if (cnt++ > 400) {
- printk(KERN_ERR "%s:E: Couldn't find logical frame %d, aborting\n",
- name, frame_seq_number);
- if (STp->read_error_frame) {
- osst_set_frame_position(STp, aSRpnt, STp->read_error_frame, 0);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Repositioning tape to bad frame %d\n",
- name, STp->read_error_frame);
-#endif
- STp->read_error_frame = 0;
- STp->abort_count++;
- }
- return (-EIO);
- }
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Looking for frame %d, attempt %d\n",
- name, frame_seq_number, cnt);
-#endif
- if ( osst_initiate_read(STp, aSRpnt)
- || ( (!STp->frame_in_buffer) && osst_read_frame(STp, aSRpnt, 30) ) ) {
- if (STp->raw)
- return (-EIO);
- position = osst_get_frame_position(STp, aSRpnt);
- if (position >= 0xbae && position < 0xbb8)
- position = 0xbb8;
- else if (position > STp->eod_frame_ppos || ++bad == 10) {
- position = STp->read_error_frame - 1;
- bad = 0;
- }
- else {
- position += 29;
- cnt += 19;
- }
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Bad frame detected, positioning tape to block %d\n",
- name, position);
-#endif
- osst_set_frame_position(STp, aSRpnt, position, 0);
- continue;
- }
- if (osst_verify_frame(STp, frame_seq_number, quiet))
- break;
- if (osst_verify_frame(STp, -1, quiet)) {
- x = ntohl(STp->buffer->aux->frame_seq_num);
- if (STp->fast_open) {
- printk(KERN_WARNING
- "%s:W: Found logical frame %d instead of %d after fast open\n",
- name, x, frame_seq_number);
- STp->header_ok = 0;
- STp->read_error_frame = 0;
- return (-EIO);
- }
- if (x > frame_seq_number) {
- if (++past > 3) {
- /* positioning backwards did not bring us to the desired frame */
- position = STp->read_error_frame - 1;
- }
- else {
- position = osst_get_frame_position(STp, aSRpnt)
- + frame_seq_number - x - 1;
-
- if (STp->first_frame_position >= 3000 && position < 3000)
- position -= 10;
- }
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: Found logical frame %d while looking for %d: back up %d\n",
- name, x, frame_seq_number,
- STp->first_frame_position - position);
-#endif
- osst_set_frame_position(STp, aSRpnt, position, 0);
- cnt += 10;
- }
- else
- past = 0;
- }
- if (osst_get_frame_position(STp, aSRpnt) == 0xbaf) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping config partition\n", name);
-#endif
- osst_set_frame_position(STp, aSRpnt, 0xbb8, 0);
- cnt--;
- }
- STp->frame_in_buffer = 0;
- }
- if (cnt > 1) {
- STp->recover_count++;
- STp->recover_erreg++;
- printk(KERN_WARNING "%s:I: Don't worry, Read error at position %d recovered\n",
- name, STp->read_error_frame);
- }
- STp->read_count++;
-
-#if DEBUG
- if (debugging || STps->eof)
- printk(OSST_DEB_MSG
- "%s:D: Exit get logical frame (%d=>%d) from OnStream tape with code %d\n",
- name, frame_seq_number, STp->frame_seq_number, STps->eof);
-#endif
- STp->fast_open = 0;
- STp->read_error_frame = 0;
- return (STps->eof);
-}
-
-static int osst_seek_logical_blk(struct osst_tape * STp, struct osst_request ** aSRpnt, int logical_blk_num)
-{
- struct st_partstat * STps = &(STp->ps[STp->partition]);
- char * name = tape_name(STp);
- int retries = 0;
- int frame_seq_estimate, ppos_estimate, move;
-
- if (logical_blk_num < 0) logical_blk_num = 0;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Seeking logical block %d (now at %d, size %d%c)\n",
- name, logical_blk_num, STp->logical_blk_num,
- STp->block_size<1024?STp->block_size:STp->block_size/1024,
- STp->block_size<1024?'b':'k');
-#endif
- /* Do we know where we are? */
- if (STps->drv_block >= 0) {
- move = logical_blk_num - STp->logical_blk_num;
- if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
- move /= (OS_DATA_SIZE / STp->block_size);
- frame_seq_estimate = STp->frame_seq_number + move;
- } else
- frame_seq_estimate = logical_blk_num * STp->block_size / OS_DATA_SIZE;
-
- if (frame_seq_estimate < 2980) ppos_estimate = frame_seq_estimate + 10;
- else ppos_estimate = frame_seq_estimate + 20;
- while (++retries < 10) {
- if (ppos_estimate > STp->eod_frame_ppos-2) {
- frame_seq_estimate += STp->eod_frame_ppos - 2 - ppos_estimate;
- ppos_estimate = STp->eod_frame_ppos - 2;
- }
- if (frame_seq_estimate < 0) {
- frame_seq_estimate = 0;
- ppos_estimate = 10;
- }
- osst_set_frame_position(STp, aSRpnt, ppos_estimate, 0);
- if (osst_get_logical_frame(STp, aSRpnt, frame_seq_estimate, 1) >= 0) {
- /* we've located the estimated frame, now does it have our block? */
- if (logical_blk_num < STp->logical_blk_num ||
- logical_blk_num >= STp->logical_blk_num + ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt)) {
- if (STps->eof == ST_FM_HIT)
- move = logical_blk_num < STp->logical_blk_num? -2 : 1;
- else {
- move = logical_blk_num - STp->logical_blk_num;
- if (move < 0) move -= (OS_DATA_SIZE / STp->block_size) - 1;
- move /= (OS_DATA_SIZE / STp->block_size);
- }
- if (!move) move = logical_blk_num > STp->logical_blk_num ? 1 : -1;
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d) move %d\n",
- name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,
- STp->logical_blk_num, logical_blk_num, move);
-#endif
- frame_seq_estimate += move;
- ppos_estimate += move;
- continue;
- } else {
- STp->buffer->read_pointer = (logical_blk_num - STp->logical_blk_num) * STp->block_size;
- STp->buffer->buffer_bytes -= STp->buffer->read_pointer;
- STp->logical_blk_num = logical_blk_num;
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: Seek success at ppos %d fsq %d in_buf %d, bytes %d, ptr %d*%d\n",
- name, ppos_estimate, STp->frame_seq_number, STp->frame_in_buffer,
- STp->buffer->buffer_bytes, STp->buffer->read_pointer / STp->block_size,
- STp->block_size);
-#endif
- STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
- if (STps->eof == ST_FM_HIT) {
- STps->drv_file++;
- STps->drv_block = 0;
- } else {
- STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
- STp->logical_blk_num -
- (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
- -1;
- }
- STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
- return 0;
- }
- }
- if (osst_get_logical_frame(STp, aSRpnt, -1, 1) < 0)
- goto error;
- /* we are not yet at the estimated frame, adjust our estimate of its physical position */
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Seek retry %d at ppos %d fsq %d (est %d) lbn %d (need %d)\n",
- name, retries, ppos_estimate, STp->frame_seq_number, frame_seq_estimate,
- STp->logical_blk_num, logical_blk_num);
-#endif
- if (frame_seq_estimate != STp->frame_seq_number)
- ppos_estimate += frame_seq_estimate - STp->frame_seq_number;
- else
- break;
- }
-error:
- printk(KERN_ERR "%s:E: Couldn't seek to logical block %d (at %d), %d retries\n",
- name, logical_blk_num, STp->logical_blk_num, retries);
- return (-EIO);
-}
-
-/* The values below are based on the OnStream frame payload size of 32K == 2**15,
- * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block
- * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions
- * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
- */
-#define OSST_FRAME_SHIFT 6
-#define OSST_SECTOR_SHIFT 9
-#define OSST_SECTOR_MASK 0x03F
-
-static int osst_get_sector(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- int sector;
-#if DEBUG
- char * name = tape_name(STp);
-
- printk(OSST_DEB_MSG
- "%s:D: Positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, %cptr %d, eof %d\n",
- name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
- STp->ps[STp->partition].drv_file, STp->ps[STp->partition].drv_block,
- STp->ps[STp->partition].rw == ST_WRITING?'w':'r',
- STp->ps[STp->partition].rw == ST_WRITING?STp->buffer->buffer_bytes:
- STp->buffer->read_pointer, STp->ps[STp->partition].eof);
-#endif
- /* do we know where we are inside a file? */
- if (STp->ps[STp->partition].drv_block >= 0) {
- sector = (STp->frame_in_buffer ? STp->first_frame_position-1 :
- STp->first_frame_position) << OSST_FRAME_SHIFT;
- if (STp->ps[STp->partition].rw == ST_WRITING)
- sector |= (STp->buffer->buffer_bytes >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
- else
- sector |= (STp->buffer->read_pointer >> OSST_SECTOR_SHIFT) & OSST_SECTOR_MASK;
- } else {
- sector = osst_get_frame_position(STp, aSRpnt);
- if (sector > 0)
- sector <<= OSST_FRAME_SHIFT;
- }
- return sector;
-}
-
-static int osst_seek_sector(struct osst_tape * STp, struct osst_request ** aSRpnt, int sector)
-{
- struct st_partstat * STps = &(STp->ps[STp->partition]);
- int frame = sector >> OSST_FRAME_SHIFT,
- offset = (sector & OSST_SECTOR_MASK) << OSST_SECTOR_SHIFT,
- r;
-#if DEBUG
- char * name = tape_name(STp);
-
- printk(OSST_DEB_MSG "%s:D: Seeking sector %d in frame %d at offset %d\n",
- name, sector, frame, offset);
-#endif
- if (frame < 0 || frame >= STp->capacity) return (-ENXIO);
-
- if (frame <= STp->first_data_ppos) {
- STp->frame_seq_number = STp->logical_blk_num = STps->drv_file = STps->drv_block = 0;
- return (osst_set_frame_position(STp, aSRpnt, frame, 0));
- }
- r = osst_set_frame_position(STp, aSRpnt, offset?frame:frame-1, 0);
- if (r < 0) return r;
-
- r = osst_get_logical_frame(STp, aSRpnt, -1, 1);
- if (r < 0) return r;
-
- if (osst_get_frame_position(STp, aSRpnt) != (offset?frame+1:frame)) return (-EIO);
-
- if (offset) {
- STp->logical_blk_num += offset / STp->block_size;
- STp->buffer->read_pointer = offset;
- STp->buffer->buffer_bytes -= offset;
- } else {
- STp->frame_seq_number++;
- STp->frame_in_buffer = 0;
- STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
- STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0;
- }
- STps->drv_file = ntohl(STp->buffer->aux->filemark_cnt);
- if (STps->eof == ST_FM_HIT) {
- STps->drv_file++;
- STps->drv_block = 0;
- } else {
- STps->drv_block = ntohl(STp->buffer->aux->last_mark_lbn)?
- STp->logical_blk_num -
- (STps->drv_file ? ntohl(STp->buffer->aux->last_mark_lbn) + 1 : 0):
- -1;
- }
- STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_NOEOF;
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: Now positioned at ppos %d, frame %d, lbn %d, file %d, blk %d, rptr %d, eof %d\n",
- name, STp->first_frame_position, STp->frame_seq_number, STp->logical_blk_num,
- STps->drv_file, STps->drv_block, STp->buffer->read_pointer, STps->eof);
-#endif
- return 0;
-}
-
-/*
- * Read back the drive's internal buffer contents, as a part
- * of the write error recovery mechanism for old OnStream
- * firmware revisions.
- * Precondition for this function to work: all frames in the
- * drive's buffer must be of one type (DATA, MARK or EOD)!
- */
-static int osst_read_back_buffer_and_rewrite(struct osst_tape * STp, struct osst_request ** aSRpnt,
- unsigned int frame, unsigned int skip, int pending)
-{
- struct osst_request * SRpnt = * aSRpnt;
- unsigned char * buffer, * p;
- unsigned char cmd[MAX_COMMAND_SIZE];
- int flag, new_frame, i;
- int nframes = STp->cur_frames;
- int blks_per_frame = ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
- int frame_seq_number = ntohl(STp->buffer->aux->frame_seq_num)
- - (nframes + pending - 1);
- int logical_blk_num = ntohl(STp->buffer->aux->logical_blk_num)
- - (nframes + pending - 1) * blks_per_frame;
- char * name = tape_name(STp);
- unsigned long startwait = jiffies;
-#if DEBUG
- int dbg = debugging;
-#endif
-
- if ((buffer = vmalloc(array_size((nframes + 1), OS_DATA_SIZE))) == NULL)
- return (-EIO);
-
- printk(KERN_INFO "%s:I: Reading back %d frames from drive buffer%s\n",
- name, nframes, pending?" and one that was pending":"");
-
- osst_copy_from_buffer(STp->buffer, (p = &buffer[nframes * OS_DATA_SIZE]));
-#if DEBUG
- if (pending && debugging)
- printk(OSST_DEB_MSG "%s:D: Pending frame %d (lblk %d), data %02x %02x %02x %02x\n",
- name, frame_seq_number + nframes,
- logical_blk_num + nframes * blks_per_frame,
- p[0], p[1], p[2], p[3]);
-#endif
- for (i = 0, p = buffer; i < nframes; i++, p += OS_DATA_SIZE) {
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = 0x3C; /* Buffer Read */
- cmd[1] = 6; /* Retrieve Faulty Block */
- cmd[7] = 32768 >> 8;
- cmd[8] = 32768 & 0xff;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_FROM_DEVICE,
- STp->timeout, MAX_RETRIES, 1);
-
- if ((STp->buffer)->syscall_result || !SRpnt) {
- printk(KERN_ERR "%s:E: Failed to read frame back from OnStream buffer\n", name);
- vfree(buffer);
- *aSRpnt = SRpnt;
- return (-EIO);
- }
- osst_copy_from_buffer(STp->buffer, p);
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Read back logical frame %d, data %02x %02x %02x %02x\n",
- name, frame_seq_number + i, p[0], p[1], p[2], p[3]);
-#endif
- }
- *aSRpnt = SRpnt;
- osst_get_frame_position(STp, aSRpnt);
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Frames left in buffer: %d\n", name, STp->cur_frames);
-#endif
- /* Write synchronously so we can be sure we're OK again and don't have to recover recursively */
- /* In the header we don't actually re-write the frames that fail, just the ones after them */
-
- for (flag=1, new_frame=frame, p=buffer, i=0; i < nframes + pending; ) {
-
- if (flag) {
- if (STp->write_type == OS_WRITE_HEADER) {
- i += skip;
- p += skip * OS_DATA_SIZE;
- }
- else if (new_frame < 2990 && new_frame+skip+nframes+pending >= 2990)
- new_frame = 3000-i;
- else
- new_frame += skip;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Position to frame %d, write fseq %d\n",
- name, new_frame+i, frame_seq_number+i);
-#endif
- osst_set_frame_position(STp, aSRpnt, new_frame + i, 0);
- osst_wait_ready(STp, aSRpnt, 60, OSST_WAIT_POSITION_COMPLETE);
- osst_get_frame_position(STp, aSRpnt);
- SRpnt = * aSRpnt;
-
- if (new_frame > frame + 1000) {
- printk(KERN_ERR "%s:E: Failed to find writable tape media\n", name);
- vfree(buffer);
- return (-EIO);
- }
- if ( i >= nframes + pending ) break;
- flag = 0;
- }
- osst_copy_to_buffer(STp->buffer, p);
- /*
- * IMPORTANT: for error recovery to work, _never_ queue frames with mixed frame type!
- */
- osst_init_aux(STp, STp->buffer->aux->frame_type, frame_seq_number+i,
- logical_blk_num + i*blks_per_frame,
- ntohl(STp->buffer->aux->dat.dat_list[0].blk_sz), blks_per_frame);
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = WRITE_6;
- cmd[1] = 1;
- cmd[4] = 1;
-
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG
- "%s:D: About to write frame %d, seq %d, lbn %d, data %02x %02x %02x %02x\n",
- name, new_frame+i, frame_seq_number+i, logical_blk_num + i*blks_per_frame,
- p[0], p[1], p[2], p[3]);
-#endif
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
- STp->timeout, MAX_RETRIES, 1);
-
- if (STp->buffer->syscall_result)
- flag = 1;
- else {
- p += OS_DATA_SIZE; i++;
-
- /* if we just sent the last frame, wait till all successfully written */
- if ( i == nframes + pending ) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Check re-write successful\n", name);
-#endif
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = WRITE_FILEMARKS;
- cmd[1] = 1;
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
- STp->timeout, MAX_RETRIES, 1);
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
- printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
- debugging = 0;
- }
-#endif
- flag = STp->buffer->syscall_result;
- while ( !flag && time_before(jiffies, startwait + 60*HZ) ) {
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE, STp->timeout,
- MAX_RETRIES, 1);
-
- if (SRpnt->sense[2] == 2 && SRpnt->sense[12] == 4 &&
- (SRpnt->sense[13] == 1 || SRpnt->sense[13] == 8)) {
- /* in the process of becoming ready */
- msleep(100);
- continue;
- }
- if (STp->buffer->syscall_result)
- flag = 1;
- break;
- }
-#if DEBUG
- debugging = dbg;
- printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
-#endif
- }
- }
- *aSRpnt = SRpnt;
- if (flag) {
- if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
- SRpnt->sense[12] == 0 &&
- SRpnt->sense[13] == 2) {
- printk(KERN_ERR "%s:E: Volume overflow in write error recovery\n", name);
- vfree(buffer);
- return (-EIO); /* hit end of tape = fail */
- }
- i = ((SRpnt->sense[3] << 24) |
- (SRpnt->sense[4] << 16) |
- (SRpnt->sense[5] << 8) |
- SRpnt->sense[6] ) - new_frame;
- p = &buffer[i * OS_DATA_SIZE];
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Additional write error at %d\n", name, new_frame+i);
-#endif
- osst_get_frame_position(STp, aSRpnt);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d, buffer = %d\n",
- name, STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
-#endif
- }
- }
- if (flag) {
- /* error recovery did not successfully complete */
- printk(KERN_ERR "%s:D: Write error recovery failed in %s\n", name,
- STp->write_type == OS_WRITE_HEADER?"header":"body");
- }
- if (!pending)
- osst_copy_to_buffer(STp->buffer, p); /* so buffer content == at entry in all cases */
- vfree(buffer);
- return 0;
-}
-
-static int osst_reposition_and_retry(struct osst_tape * STp, struct osst_request ** aSRpnt,
- unsigned int frame, unsigned int skip, int pending)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- char * name = tape_name(STp);
- int expected = 0;
- int attempts = 1000 / skip;
- int flag = 1;
- unsigned long startwait = jiffies;
-#if DEBUG
- int dbg = debugging;
-#endif
-
- while (attempts && time_before(jiffies, startwait + 60*HZ)) {
- if (flag) {
-#if DEBUG
- debugging = dbg;
-#endif
- if (frame < 2990 && frame+skip+STp->cur_frames+pending >= 2990)
- frame = 3000-skip;
- expected = frame+skip+STp->cur_frames+pending;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Position to fppos %d, re-write from fseq %d\n",
- name, frame+skip, STp->frame_seq_number-STp->cur_frames-pending);
-#endif
- osst_set_frame_position(STp, aSRpnt, frame + skip, 1);
- flag = 0;
- attempts--;
- schedule_timeout_interruptible(msecs_to_jiffies(100));
- }
- if (osst_get_frame_position(STp, aSRpnt) < 0) { /* additional write error */
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Addl error, host %d, tape %d, buffer %d\n",
- name, STp->first_frame_position,
- STp->last_frame_position, STp->cur_frames);
-#endif
- frame = STp->last_frame_position;
- flag = 1;
- continue;
- }
- if (pending && STp->cur_frames < 50) {
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = WRITE_6;
- cmd[1] = 1;
- cmd[4] = 1;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: About to write pending fseq %d at fppos %d\n",
- name, STp->frame_seq_number-1, STp->first_frame_position);
-#endif
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE,
- STp->timeout, MAX_RETRIES, 1);
- *aSRpnt = SRpnt;
-
- if (STp->buffer->syscall_result) { /* additional write error */
- if ((SRpnt->sense[ 2] & 0x0f) == 13 &&
- SRpnt->sense[12] == 0 &&
- SRpnt->sense[13] == 2) {
- printk(KERN_ERR
- "%s:E: Volume overflow in write error recovery\n",
- name);
- break; /* hit end of tape = fail */
- }
- flag = 1;
- }
- else
- pending = 0;
-
- continue;
- }
- if (STp->cur_frames == 0) {
-#if DEBUG
- debugging = dbg;
- printk(OSST_DEB_MSG "%s:D: Wait re-write finished\n", name);
-#endif
- if (STp->first_frame_position != expected) {
- printk(KERN_ERR "%s:A: Actual position %d - expected %d\n",
- name, STp->first_frame_position, expected);
- return (-EIO);
- }
- return 0;
- }
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG "%s:D: Sleeping in re-write wait ready\n", name);
- printk(OSST_DEB_MSG "%s:D: Turning off debugging for a while\n", name);
- debugging = 0;
- }
-#endif
- schedule_timeout_interruptible(msecs_to_jiffies(100));
- }
- printk(KERN_ERR "%s:E: Failed to find valid tape media\n", name);
-#if DEBUG
- debugging = dbg;
-#endif
- return (-EIO);
-}
-
-/*
- * Error recovery algorithm for the OnStream tape.
- */
-
-static int osst_write_error_recovery(struct osst_tape * STp, struct osst_request ** aSRpnt, int pending)
-{
- struct osst_request * SRpnt = * aSRpnt;
- struct st_partstat * STps = & STp->ps[STp->partition];
- char * name = tape_name(STp);
- int retval = 0;
- int rw_state;
- unsigned int frame, skip;
-
- rw_state = STps->rw;
-
- if ((SRpnt->sense[ 2] & 0x0f) != 3
- || SRpnt->sense[12] != 12
- || SRpnt->sense[13] != 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Write error recovery cannot handle %02x:%02x:%02x\n", name,
- SRpnt->sense[2], SRpnt->sense[12], SRpnt->sense[13]);
-#endif
- return (-EIO);
- }
- frame = (SRpnt->sense[3] << 24) |
- (SRpnt->sense[4] << 16) |
- (SRpnt->sense[5] << 8) |
- SRpnt->sense[6];
- skip = SRpnt->sense[9];
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Detected physical bad frame at %u, advised to skip %d\n", name, frame, skip);
-#endif
- osst_get_frame_position(STp, aSRpnt);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: reported frame positions: host = %d, tape = %d\n",
- name, STp->first_frame_position, STp->last_frame_position);
-#endif
- switch (STp->write_type) {
- case OS_WRITE_DATA:
- case OS_WRITE_EOD:
- case OS_WRITE_NEW_MARK:
- printk(KERN_WARNING
- "%s:I: Relocating %d buffered logical frames from position %u to %u\n",
- name, STp->cur_frames, frame, (frame + skip > 3000 && frame < 3000)?3000:frame + skip);
- if (STp->os_fw_rev >= 10600)
- retval = osst_reposition_and_retry(STp, aSRpnt, frame, skip, pending);
- else
- retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, skip, pending);
- printk(KERN_WARNING "%s:%s: %sWrite error%srecovered\n", name,
- retval?"E" :"I",
- retval?"" :"Don't worry, ",
- retval?" not ":" ");
- break;
- case OS_WRITE_LAST_MARK:
- printk(KERN_ERR "%s:E: Bad frame in update last marker, fatal\n", name);
- osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
- retval = -EIO;
- break;
- case OS_WRITE_HEADER:
- printk(KERN_WARNING "%s:I: Bad frame in header partition, skipped\n", name);
- retval = osst_read_back_buffer_and_rewrite(STp, aSRpnt, frame, 1, pending);
- break;
- default:
- printk(KERN_INFO "%s:I: Bad frame in filler, ignored\n", name);
- osst_set_frame_position(STp, aSRpnt, frame + STp->cur_frames + pending, 0);
- }
- osst_get_frame_position(STp, aSRpnt);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Positioning complete, cur_frames %d, pos %d, tape pos %d\n",
- name, STp->cur_frames, STp->first_frame_position, STp->last_frame_position);
- printk(OSST_DEB_MSG "%s:D: next logical frame to write: %d\n", name, STp->logical_blk_num);
-#endif
- if (retval == 0) {
- STp->recover_count++;
- STp->recover_erreg++;
- } else
- STp->abort_count++;
-
- STps->rw = rw_state;
- return retval;
-}
-
-static int osst_space_over_filemarks_backward(struct osst_tape * STp, struct osst_request ** aSRpnt,
- int mt_op, int mt_count)
-{
- char * name = tape_name(STp);
- int cnt;
- int last_mark_ppos = -1;
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_backwards %d %d\n", name, mt_op, mt_count);
-#endif
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_bwd\n", name);
-#endif
- return -EIO;
- }
- if (STp->linux_media_version >= 4) {
- /*
- * direct lookup in header filemark list
- */
- cnt = ntohl(STp->buffer->aux->filemark_cnt);
- if (STp->header_ok &&
- STp->header_cache != NULL &&
- (cnt - mt_count) >= 0 &&
- (cnt - mt_count) < OS_FM_TAB_MAX &&
- (cnt - mt_count) < STp->filemark_cnt &&
- STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] == STp->buffer->aux->last_mark_ppos)
-
- last_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt - mt_count]);
-#if DEBUG
- if (STp->header_cache == NULL || (cnt - mt_count) < 0 || (cnt - mt_count) >= OS_FM_TAB_MAX)
- printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
- STp->header_cache == NULL?"lack of header cache":"count out of range");
- else
- printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
- name, cnt,
- ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
- (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt-1] ==
- STp->buffer->aux->last_mark_ppos))?"match":"error",
- mt_count, last_mark_ppos);
-#endif
- if (last_mark_ppos > 10 && last_mark_ppos < STp->eod_frame_ppos) {
- osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
-#endif
- return (-EIO);
- }
- if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
- printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
- name, last_mark_ppos);
- return (-EIO);
- }
- goto found;
- }
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reverting to scan filemark backwards\n", name);
-#endif
- }
- cnt = 0;
- while (cnt != mt_count) {
- last_mark_ppos = ntohl(STp->buffer->aux->last_mark_ppos);
- if (last_mark_ppos == -1)
- return (-EIO);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Positioning to last mark at %d\n", name, last_mark_ppos);
-#endif
- osst_position_tape_and_confirm(STp, aSRpnt, last_mark_ppos);
- cnt++;
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
-#endif
- return (-EIO);
- }
- if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
- printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
- name, last_mark_ppos);
- return (-EIO);
- }
- }
-found:
- if (mt_op == MTBSFM) {
- STp->frame_seq_number++;
- STp->frame_in_buffer = 0;
- STp->buffer->buffer_bytes = 0;
- STp->buffer->read_pointer = 0;
- STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
- }
- return 0;
-}
-
-/*
- * ADRL 1.1 compatible "slow" space filemarks fwd version
- *
- * Just scans for the filemark sequentially.
- */
-static int osst_space_over_filemarks_forward_slow(struct osst_tape * STp, struct osst_request ** aSRpnt,
- int mt_op, int mt_count)
-{
- int cnt = 0;
-#if DEBUG
- char * name = tape_name(STp);
-
- printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_slow %d %d\n", name, mt_op, mt_count);
-#endif
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
-#endif
- return (-EIO);
- }
- while (1) {
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n", name);
-#endif
- return (-EIO);
- }
- if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
- cnt++;
- if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
-#endif
- if (STp->first_frame_position > STp->eod_frame_ppos+1) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: EOD position corrected (%d=>%d)\n",
- name, STp->eod_frame_ppos, STp->first_frame_position-1);
-#endif
- STp->eod_frame_ppos = STp->first_frame_position-1;
- }
- return (-EIO);
- }
- if (cnt == mt_count)
- break;
- STp->frame_in_buffer = 0;
- }
- if (mt_op == MTFSF) {
- STp->frame_seq_number++;
- STp->frame_in_buffer = 0;
- STp->buffer->buffer_bytes = 0;
- STp->buffer->read_pointer = 0;
- STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
- }
- return 0;
-}
-
-/*
- * Fast linux specific version of OnStream FSF
- */
-static int osst_space_over_filemarks_forward_fast(struct osst_tape * STp, struct osst_request ** aSRpnt,
- int mt_op, int mt_count)
-{
- char * name = tape_name(STp);
- int cnt = 0,
- next_mark_ppos = -1;
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reached space_over_filemarks_forward_fast %d %d\n", name, mt_op, mt_count);
-#endif
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks_fwd\n", name);
-#endif
- return (-EIO);
- }
-
- if (STp->linux_media_version >= 4) {
- /*
- * direct lookup in header filemark list
- */
- cnt = ntohl(STp->buffer->aux->filemark_cnt) - 1;
- if (STp->header_ok &&
- STp->header_cache != NULL &&
- (cnt + mt_count) < OS_FM_TAB_MAX &&
- (cnt + mt_count) < STp->filemark_cnt &&
- ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
- (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] == STp->buffer->aux->last_mark_ppos)))
-
- next_mark_ppos = ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[cnt + mt_count]);
-#if DEBUG
- if (STp->header_cache == NULL || (cnt + mt_count) >= OS_FM_TAB_MAX)
- printk(OSST_DEB_MSG "%s:D: Filemark lookup fail due to %s\n", name,
- STp->header_cache == NULL?"lack of header cache":"count out of range");
- else
- printk(OSST_DEB_MSG "%s:D: Filemark lookup: prev mark %d (%s), skip %d to %d\n",
- name, cnt,
- ((cnt == -1 && ntohl(STp->buffer->aux->last_mark_ppos) == -1) ||
- (STp->header_cache->dat_fm_tab.fm_tab_ent[cnt] ==
- STp->buffer->aux->last_mark_ppos))?"match":"error",
- mt_count, next_mark_ppos);
-#endif
- if (next_mark_ppos <= 10 || next_mark_ppos > STp->eod_frame_ppos) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
-#endif
- return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
- } else {
- osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
- name);
-#endif
- return (-EIO);
- }
- if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
- printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
- name, next_mark_ppos);
- return (-EIO);
- }
- if (ntohl(STp->buffer->aux->filemark_cnt) != cnt + mt_count) {
- printk(KERN_WARNING "%s:W: Expected to find marker %d at ppos %d, not %d\n",
- name, cnt+mt_count, next_mark_ppos,
- ntohl(STp->buffer->aux->filemark_cnt));
- return (-EIO);
- }
- }
- } else {
- /*
- * Find nearest (usually previous) marker, then jump from marker to marker
- */
- while (1) {
- if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER)
- break;
- if (STp->buffer->aux->frame_type == OS_FRAME_TYPE_EOD) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: space_fwd: EOD reached\n", name);
-#endif
- return (-EIO);
- }
- if (ntohl(STp->buffer->aux->filemark_cnt) == 0) {
- if (STp->first_mark_ppos == -1) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
-#endif
- return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count);
- }
- osst_position_tape_and_confirm(STp, aSRpnt, STp->first_mark_ppos);
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: Couldn't get logical blk num in space_filemarks_fwd_fast\n",
- name);
-#endif
- return (-EIO);
- }
- if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
- printk(KERN_WARNING "%s:W: Expected to find filemark at %d\n",
- name, STp->first_mark_ppos);
- return (-EIO);
- }
- } else {
- if (osst_space_over_filemarks_backward(STp, aSRpnt, MTBSF, 1) < 0)
- return (-EIO);
- mt_count++;
- }
- }
- cnt++;
- while (cnt != mt_count) {
- next_mark_ppos = ntohl(STp->buffer->aux->next_mark_ppos);
- if (!next_mark_ppos || next_mark_ppos > STp->eod_frame_ppos) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reverting to slow filemark space\n", name);
-#endif
- return osst_space_over_filemarks_forward_slow(STp, aSRpnt, mt_op, mt_count - cnt);
- }
-#if DEBUG
- else printk(OSST_DEB_MSG "%s:D: Positioning to next mark at %d\n", name, next_mark_ppos);
-#endif
- osst_position_tape_and_confirm(STp, aSRpnt, next_mark_ppos);
- cnt++;
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in space_filemarks\n",
- name);
-#endif
- return (-EIO);
- }
- if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_MARKER) {
- printk(KERN_WARNING "%s:W: Expected to find marker at ppos %d, not found\n",
- name, next_mark_ppos);
- return (-EIO);
- }
- }
- }
- if (mt_op == MTFSF) {
- STp->frame_seq_number++;
- STp->frame_in_buffer = 0;
- STp->buffer->buffer_bytes = 0;
- STp->buffer->read_pointer = 0;
- STp->logical_blk_num += ntohs(STp->buffer->aux->dat.dat_list[0].blk_cnt);
- }
- return 0;
-}
-
-/*
- * In debug mode, we want to see as many errors as possible
- * to test the error recovery mechanism.
- */
-#if DEBUG
-static void osst_set_retries(struct osst_tape * STp, struct osst_request ** aSRpnt, int retries)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt = * aSRpnt;
- char * name = tape_name(STp);
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SELECT;
- cmd[1] = 0x10;
- cmd[4] = NUMBER_RETRIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
- (STp->buffer)->b_data[0] = cmd[4] - 1;
- (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */
- (STp->buffer)->b_data[2] = 0; /* Reserved */
- (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = NUMBER_RETRIES_PAGE | (1 << 7);
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 2;
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 4;
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = retries;
-
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Setting number of retries on OnStream tape to %d\n", name, retries);
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
- *aSRpnt = SRpnt;
-
- if ((STp->buffer)->syscall_result)
- printk (KERN_ERR "%s:D: Couldn't set retries to %d\n", name, retries);
-}
-#endif
-
-
-static int osst_write_filemark(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- int result;
- int this_mark_ppos = STp->first_frame_position;
- int this_mark_lbn = STp->logical_blk_num;
-#if DEBUG
- char * name = tape_name(STp);
-#endif
-
- if (STp->raw) return 0;
-
- STp->write_type = OS_WRITE_NEW_MARK;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Writing Filemark %i at fppos %d (fseq %d, lblk %d)\n",
- name, STp->filemark_cnt, this_mark_ppos, STp->frame_seq_number, this_mark_lbn);
-#endif
- STp->dirty = 1;
- result = osst_flush_write_buffer(STp, aSRpnt);
- result |= osst_flush_drive_buffer(STp, aSRpnt);
- STp->last_mark_ppos = this_mark_ppos;
- STp->last_mark_lbn = this_mark_lbn;
- if (STp->header_cache != NULL && STp->filemark_cnt < OS_FM_TAB_MAX)
- STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt] = htonl(this_mark_ppos);
- if (STp->filemark_cnt++ == 0)
- STp->first_mark_ppos = this_mark_ppos;
- return result;
-}
-
-static int osst_write_eod(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- int result;
-#if DEBUG
- char * name = tape_name(STp);
-#endif
-
- if (STp->raw) return 0;
-
- STp->write_type = OS_WRITE_EOD;
- STp->eod_frame_ppos = STp->first_frame_position;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Writing EOD at fppos %d (fseq %d, lblk %d)\n", name,
- STp->eod_frame_ppos, STp->frame_seq_number, STp->logical_blk_num);
-#endif
- STp->dirty = 1;
-
- result = osst_flush_write_buffer(STp, aSRpnt);
- result |= osst_flush_drive_buffer(STp, aSRpnt);
- STp->eod_frame_lfa = --(STp->frame_seq_number);
- return result;
-}
-
-static int osst_write_filler(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
-{
- char * name = tape_name(STp);
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reached onstream write filler group %d\n", name, where);
-#endif
- osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
- osst_set_frame_position(STp, aSRpnt, where, 0);
- STp->write_type = OS_WRITE_FILLER;
- while (count--) {
- memcpy(STp->buffer->b_data, "Filler", 6);
- STp->buffer->buffer_bytes = 6;
- STp->dirty = 1;
- if (osst_flush_write_buffer(STp, aSRpnt)) {
- printk(KERN_INFO "%s:I: Couldn't write filler frame\n", name);
- return (-EIO);
- }
- }
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Exiting onstream write filler group\n", name);
-#endif
- return osst_flush_drive_buffer(STp, aSRpnt);
-}
-
-static int __osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int where, int count)
-{
- char * name = tape_name(STp);
- int result;
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reached onstream write header group %d\n", name, where);
-#endif
- osst_wait_ready(STp, aSRpnt, 60 * 5, 0);
- osst_set_frame_position(STp, aSRpnt, where, 0);
- STp->write_type = OS_WRITE_HEADER;
- while (count--) {
- osst_copy_to_buffer(STp->buffer, (unsigned char *)STp->header_cache);
- STp->buffer->buffer_bytes = sizeof(os_header_t);
- STp->dirty = 1;
- if (osst_flush_write_buffer(STp, aSRpnt)) {
- printk(KERN_INFO "%s:I: Couldn't write header frame\n", name);
- return (-EIO);
- }
- }
- result = osst_flush_drive_buffer(STp, aSRpnt);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Write onstream header group %s\n", name, result?"failed":"done");
-#endif
- return result;
-}
-
-static int osst_write_header(struct osst_tape * STp, struct osst_request ** aSRpnt, int locate_eod)
-{
- os_header_t * header;
- int result;
- char * name = tape_name(STp);
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Writing tape header\n", name);
-#endif
- if (STp->raw) return 0;
-
- if (STp->header_cache == NULL) {
- if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) {
- printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
- return (-ENOMEM);
- }
- memset(STp->header_cache, 0, sizeof(os_header_t));
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Allocated and cleared memory for header cache\n", name);
-#endif
- }
- if (STp->header_ok) STp->update_frame_cntr++;
- else STp->update_frame_cntr = 0;
-
- header = STp->header_cache;
- strcpy(header->ident_str, "ADR_SEQ");
- header->major_rev = 1;
- header->minor_rev = 4;
- header->ext_trk_tb_off = htons(17192);
- header->pt_par_num = 1;
- header->partition[0].partition_num = OS_DATA_PARTITION;
- header->partition[0].par_desc_ver = OS_PARTITION_VERSION;
- header->partition[0].wrt_pass_cntr = htons(STp->wrt_pass_cntr);
- header->partition[0].first_frame_ppos = htonl(STp->first_data_ppos);
- header->partition[0].last_frame_ppos = htonl(STp->capacity);
- header->partition[0].eod_frame_ppos = htonl(STp->eod_frame_ppos);
- header->cfg_col_width = htonl(20);
- header->dat_col_width = htonl(1500);
- header->qfa_col_width = htonl(0);
- header->ext_track_tb.nr_stream_part = 1;
- header->ext_track_tb.et_ent_sz = 32;
- header->ext_track_tb.dat_ext_trk_ey.et_part_num = 0;
- header->ext_track_tb.dat_ext_trk_ey.fmt = 1;
- header->ext_track_tb.dat_ext_trk_ey.fm_tab_off = htons(17736);
- header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi = 0;
- header->ext_track_tb.dat_ext_trk_ey.last_hlb = htonl(STp->eod_frame_lfa);
- header->ext_track_tb.dat_ext_trk_ey.last_pp = htonl(STp->eod_frame_ppos);
- header->dat_fm_tab.fm_part_num = 0;
- header->dat_fm_tab.fm_tab_ent_sz = 4;
- header->dat_fm_tab.fm_tab_ent_cnt = htons(STp->filemark_cnt<OS_FM_TAB_MAX?
- STp->filemark_cnt:OS_FM_TAB_MAX);
-
- result = __osst_write_header(STp, aSRpnt, 0xbae, 5);
- if (STp->update_frame_cntr == 0)
- osst_write_filler(STp, aSRpnt, 0xbb3, 5);
- result &= __osst_write_header(STp, aSRpnt, 5, 5);
-
- if (locate_eod) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Locating back to eod frame addr %d\n", name, STp->eod_frame_ppos);
-#endif
- osst_set_frame_position(STp, aSRpnt, STp->eod_frame_ppos, 0);
- }
- if (result)
- printk(KERN_ERR "%s:E: Write header failed\n", name);
- else {
- memcpy(STp->application_sig, "LIN4", 4);
- STp->linux_media = 1;
- STp->linux_media_version = 4;
- STp->header_ok = 1;
- }
- return result;
-}
-
-static int osst_reset_header(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- if (STp->header_cache != NULL)
- memset(STp->header_cache, 0, sizeof(os_header_t));
-
- STp->logical_blk_num = STp->frame_seq_number = 0;
- STp->frame_in_buffer = 0;
- STp->eod_frame_ppos = STp->first_data_ppos = 0x0000000A;
- STp->filemark_cnt = 0;
- STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
- return osst_write_header(STp, aSRpnt, 1);
-}
-
-static int __osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt, int ppos)
-{
- char * name = tape_name(STp);
- os_header_t * header;
- os_aux_t * aux;
- char id_string[8];
- int linux_media_version,
- update_frame_cntr;
-
- if (STp->raw)
- return 1;
-
- if (ppos == 5 || ppos == 0xbae || STp->buffer->syscall_result) {
- if (osst_set_frame_position(STp, aSRpnt, ppos, 0))
- printk(KERN_WARNING "%s:W: Couldn't position tape\n", name);
- osst_wait_ready(STp, aSRpnt, 60 * 15, 0);
- if (osst_initiate_read (STp, aSRpnt)) {
- printk(KERN_WARNING "%s:W: Couldn't initiate read\n", name);
- return 0;
- }
- }
- if (osst_read_frame(STp, aSRpnt, 180)) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't read header frame\n", name);
-#endif
- return 0;
- }
- header = (os_header_t *) STp->buffer->b_data; /* warning: only first segment addressable */
- aux = STp->buffer->aux;
- if (aux->frame_type != OS_FRAME_TYPE_HEADER) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping non-header frame (%d)\n", name, ppos);
-#endif
- return 0;
- }
- if (ntohl(aux->frame_seq_num) != 0 ||
- ntohl(aux->logical_blk_num) != 0 ||
- aux->partition.partition_num != OS_CONFIG_PARTITION ||
- ntohl(aux->partition.first_frame_ppos) != 0 ||
- ntohl(aux->partition.last_frame_ppos) != 0xbb7 ) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Invalid header frame (%d,%d,%d,%d,%d)\n", name,
- ntohl(aux->frame_seq_num), ntohl(aux->logical_blk_num),
- aux->partition.partition_num, ntohl(aux->partition.first_frame_ppos),
- ntohl(aux->partition.last_frame_ppos));
-#endif
- return 0;
- }
- if (strncmp(header->ident_str, "ADR_SEQ", 7) != 0 &&
- strncmp(header->ident_str, "ADR-SEQ", 7) != 0) {
- strlcpy(id_string, header->ident_str, 8);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Invalid header identification string %s\n", name, id_string);
-#endif
- return 0;
- }
- update_frame_cntr = ntohl(aux->update_frame_cntr);
- if (update_frame_cntr < STp->update_frame_cntr) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame %d with update_frame_counter %d<%d\n",
- name, ppos, update_frame_cntr, STp->update_frame_cntr);
-#endif
- return 0;
- }
- if (header->major_rev != 1 || header->minor_rev != 4 ) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: %s revision %d.%d detected (1.4 supported)\n",
- name, (header->major_rev != 1 || header->minor_rev < 2 ||
- header->minor_rev > 4 )? "Invalid" : "Warning:",
- header->major_rev, header->minor_rev);
-#endif
- if (header->major_rev != 1 || header->minor_rev < 2 || header->minor_rev > 4)
- return 0;
- }
-#if DEBUG
- if (header->pt_par_num != 1)
- printk(KERN_INFO "%s:W: %d partitions defined, only one supported\n",
- name, header->pt_par_num);
-#endif
- memcpy(id_string, aux->application_sig, 4);
- id_string[4] = 0;
- if (memcmp(id_string, "LIN", 3) == 0) {
- STp->linux_media = 1;
- linux_media_version = id_string[3] - '0';
- if (linux_media_version != 4)
- printk(KERN_INFO "%s:I: Linux media version %d detected (current 4)\n",
- name, linux_media_version);
- } else {
- printk(KERN_WARNING "%s:W: Non Linux media detected (%s)\n", name, id_string);
- return 0;
- }
- if (linux_media_version < STp->linux_media_version) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping frame %d with linux_media_version %d\n",
- name, ppos, linux_media_version);
-#endif
- return 0;
- }
- if (linux_media_version > STp->linux_media_version) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Frame %d sets linux_media_version to %d\n",
- name, ppos, linux_media_version);
-#endif
- memcpy(STp->application_sig, id_string, 5);
- STp->linux_media_version = linux_media_version;
- STp->update_frame_cntr = -1;
- }
- if (update_frame_cntr > STp->update_frame_cntr) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Frame %d sets update_frame_counter to %d\n",
- name, ppos, update_frame_cntr);
-#endif
- if (STp->header_cache == NULL) {
- if ((STp->header_cache = vmalloc(sizeof(os_header_t))) == NULL) {
- printk(KERN_ERR "%s:E: Failed to allocate header cache\n", name);
- return 0;
- }
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Allocated memory for header cache\n", name);
-#endif
- }
- osst_copy_from_buffer(STp->buffer, (unsigned char *)STp->header_cache);
- header = STp->header_cache; /* further accesses from cached (full) copy */
-
- STp->wrt_pass_cntr = ntohs(header->partition[0].wrt_pass_cntr);
- STp->first_data_ppos = ntohl(header->partition[0].first_frame_ppos);
- STp->eod_frame_ppos = ntohl(header->partition[0].eod_frame_ppos);
- STp->eod_frame_lfa = ntohl(header->ext_track_tb.dat_ext_trk_ey.last_hlb);
- STp->filemark_cnt = ntohl(aux->filemark_cnt);
- STp->first_mark_ppos = ntohl(aux->next_mark_ppos);
- STp->last_mark_ppos = ntohl(aux->last_mark_ppos);
- STp->last_mark_lbn = ntohl(aux->last_mark_lbn);
- STp->update_frame_cntr = update_frame_cntr;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Detected write pass %d, update frame counter %d, filemark counter %d\n",
- name, STp->wrt_pass_cntr, STp->update_frame_cntr, STp->filemark_cnt);
- printk(OSST_DEB_MSG "%s:D: first data frame on tape = %d, last = %d, eod frame = %d\n", name,
- STp->first_data_ppos,
- ntohl(header->partition[0].last_frame_ppos),
- ntohl(header->partition[0].eod_frame_ppos));
- printk(OSST_DEB_MSG "%s:D: first mark on tape = %d, last = %d, eod frame = %d\n",
- name, STp->first_mark_ppos, STp->last_mark_ppos, STp->eod_frame_ppos);
-#endif
- if (header->minor_rev < 4 && STp->linux_media_version == 4) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Moving filemark list to ADR 1.4 location\n", name);
-#endif
- memcpy((void *)header->dat_fm_tab.fm_tab_ent,
- (void *)header->old_filemark_list, sizeof(header->dat_fm_tab.fm_tab_ent));
- memset((void *)header->old_filemark_list, 0, sizeof(header->old_filemark_list));
- }
- if (header->minor_rev == 4 &&
- (header->ext_trk_tb_off != htons(17192) ||
- header->partition[0].partition_num != OS_DATA_PARTITION ||
- header->partition[0].par_desc_ver != OS_PARTITION_VERSION ||
- header->partition[0].last_frame_ppos != htonl(STp->capacity) ||
- header->cfg_col_width != htonl(20) ||
- header->dat_col_width != htonl(1500) ||
- header->qfa_col_width != htonl(0) ||
- header->ext_track_tb.nr_stream_part != 1 ||
- header->ext_track_tb.et_ent_sz != 32 ||
- header->ext_track_tb.dat_ext_trk_ey.et_part_num != OS_DATA_PARTITION ||
- header->ext_track_tb.dat_ext_trk_ey.fmt != 1 ||
- header->ext_track_tb.dat_ext_trk_ey.fm_tab_off != htons(17736) ||
- header->ext_track_tb.dat_ext_trk_ey.last_hlb_hi != 0 ||
- header->ext_track_tb.dat_ext_trk_ey.last_pp != htonl(STp->eod_frame_ppos) ||
- header->dat_fm_tab.fm_part_num != OS_DATA_PARTITION ||
- header->dat_fm_tab.fm_tab_ent_sz != 4 ||
- header->dat_fm_tab.fm_tab_ent_cnt !=
- htons(STp->filemark_cnt<OS_FM_TAB_MAX?STp->filemark_cnt:OS_FM_TAB_MAX)))
- printk(KERN_WARNING "%s:W: Failed consistency check ADR 1.4 format\n", name);
-
- }
-
- return 1;
-}
-
-static int osst_analyze_headers(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- int position, ppos;
- int first, last;
- int valid = 0;
- char * name = tape_name(STp);
-
- position = osst_get_frame_position(STp, aSRpnt);
-
- if (STp->raw) {
- STp->header_ok = STp->linux_media = 1;
- STp->linux_media_version = 0;
- return 1;
- }
- STp->header_ok = STp->linux_media = STp->linux_media_version = 0;
- STp->wrt_pass_cntr = STp->update_frame_cntr = -1;
- STp->eod_frame_ppos = STp->first_data_ppos = -1;
- STp->first_mark_ppos = STp->last_mark_ppos = STp->last_mark_lbn = -1;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reading header\n", name);
-#endif
-
- /* optimization for speed - if we are positioned at ppos 10, read second group first */
- /* TODO try the ADR 1.1 locations for the second group if we have no valid one yet... */
-
- first = position==10?0xbae: 5;
- last = position==10?0xbb3:10;
-
- for (ppos = first; ppos < last; ppos++)
- if (__osst_analyze_headers(STp, aSRpnt, ppos))
- valid = 1;
-
- first = position==10? 5:0xbae;
- last = position==10?10:0xbb3;
-
- for (ppos = first; ppos < last; ppos++)
- if (__osst_analyze_headers(STp, aSRpnt, ppos))
- valid = 1;
-
- if (!valid) {
- printk(KERN_ERR "%s:E: Failed to find valid ADRL header, new media?\n", name);
- STp->eod_frame_ppos = STp->first_data_ppos = 0;
- osst_set_frame_position(STp, aSRpnt, 10, 0);
- return 0;
- }
- if (position <= STp->first_data_ppos) {
- position = STp->first_data_ppos;
- STp->ps[0].drv_file = STp->ps[0].drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
- }
- osst_set_frame_position(STp, aSRpnt, position, 0);
- STp->header_ok = 1;
-
- return 1;
-}
-
-static int osst_verify_position(struct osst_tape * STp, struct osst_request ** aSRpnt)
-{
- int frame_position = STp->first_frame_position;
- int frame_seq_numbr = STp->frame_seq_number;
- int logical_blk_num = STp->logical_blk_num;
- int halfway_frame = STp->frame_in_buffer;
- int read_pointer = STp->buffer->read_pointer;
- int prev_mark_ppos = -1;
- int actual_mark_ppos, i, n;
-#if DEBUG
- char * name = tape_name(STp);
-
- printk(OSST_DEB_MSG "%s:D: Verify that the tape is really the one we think before writing\n", name);
-#endif
- osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
- if (osst_get_logical_frame(STp, aSRpnt, -1, 0) < 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't get logical blk num in verify_position\n", name);
-#endif
- return (-EIO);
- }
- if (STp->linux_media_version >= 4) {
- for (i=0; i<STp->filemark_cnt; i++)
- if ((n=ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i])) < frame_position)
- prev_mark_ppos = n;
- } else
- prev_mark_ppos = frame_position - 1; /* usually - we don't really know */
- actual_mark_ppos = STp->buffer->aux->frame_type == OS_FRAME_TYPE_MARKER ?
- frame_position - 1 : ntohl(STp->buffer->aux->last_mark_ppos);
- if (frame_position != STp->first_frame_position ||
- frame_seq_numbr != STp->frame_seq_number + (halfway_frame?0:1) ||
- prev_mark_ppos != actual_mark_ppos ) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Block mismatch: fppos %d-%d, fseq %d-%d, mark %d-%d\n", name,
- STp->first_frame_position, frame_position,
- STp->frame_seq_number + (halfway_frame?0:1),
- frame_seq_numbr, actual_mark_ppos, prev_mark_ppos);
-#endif
- return (-EIO);
- }
- if (halfway_frame) {
- /* prepare buffer for append and rewrite on top of original */
- osst_set_frame_position(STp, aSRpnt, frame_position - 1, 0);
- STp->buffer->buffer_bytes = read_pointer;
- STp->ps[STp->partition].rw = ST_WRITING;
- STp->dirty = 1;
- }
- STp->frame_in_buffer = halfway_frame;
- STp->frame_seq_number = frame_seq_numbr;
- STp->logical_blk_num = logical_blk_num;
- return 0;
-}
-
-/* Acc. to OnStream, the vers. numbering is the following:
- * X.XX for released versions (X=digit),
- * XXXY for unreleased versions (Y=letter)
- * Ordering 1.05 < 106A < 106B < ... < 106a < ... < 1.06
- * This fn makes monoton numbers out of this scheme ...
- */
-static unsigned int osst_parse_firmware_rev (const char * str)
-{
- if (str[1] == '.') {
- return (str[0]-'0')*10000
- +(str[2]-'0')*1000
- +(str[3]-'0')*100;
- } else {
- return (str[0]-'0')*10000
- +(str[1]-'0')*1000
- +(str[2]-'0')*100 - 100
- +(str[3]-'@');
- }
-}
-
-/*
- * Configure the OnStream SCII tape drive for default operation
- */
-static int osst_configure_onstream(struct osst_tape *STp, struct osst_request ** aSRpnt)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- char * name = tape_name(STp);
- struct osst_request * SRpnt = * aSRpnt;
- osst_mode_parameter_header_t * header;
- osst_block_size_page_t * bs;
- osst_capabilities_page_t * cp;
- osst_tape_paramtr_page_t * prm;
- int drive_buffer_size;
-
- if (STp->ready != ST_READY) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Not Ready\n", name);
-#endif
- return (-EIO);
- }
-
- if (STp->os_fw_rev < 10600) {
- printk(KERN_INFO "%s:I: Old OnStream firmware revision detected (%s),\n", name, STp->device->rev);
- printk(KERN_INFO "%s:I: an upgrade to version 1.06 or above is recommended\n", name);
- }
-
- /*
- * Configure 32.5KB (data+aux) frame size.
- * Get the current frame size from the block size mode page
- */
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SENSE;
- cmd[1] = 8;
- cmd[2] = BLOCK_SIZE_PAGE;
- cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
- if (SRpnt == NULL) {
-#if DEBUG
- printk(OSST_DEB_MSG "osst :D: Busy\n");
-#endif
- return (-EBUSY);
- }
- *aSRpnt = SRpnt;
- if ((STp->buffer)->syscall_result != 0) {
- printk (KERN_ERR "%s:E: Can't get tape block size mode page\n", name);
- return (-EIO);
- }
-
- header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
- bs = (osst_block_size_page_t *) ((STp->buffer)->b_data + sizeof(osst_mode_parameter_header_t) + header->bdl);
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: 32KB play back: %s\n", name, bs->play32 ? "Yes" : "No");
- printk(OSST_DEB_MSG "%s:D: 32.5KB play back: %s\n", name, bs->play32_5 ? "Yes" : "No");
- printk(OSST_DEB_MSG "%s:D: 32KB record: %s\n", name, bs->record32 ? "Yes" : "No");
- printk(OSST_DEB_MSG "%s:D: 32.5KB record: %s\n", name, bs->record32_5 ? "Yes" : "No");
-#endif
-
- /*
- * Configure default auto columns mode, 32.5KB transfer mode
- */
- bs->one = 1;
- bs->play32 = 0;
- bs->play32_5 = 1;
- bs->record32 = 0;
- bs->record32_5 = 1;
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SELECT;
- cmd[1] = 0x10;
- cmd[4] = BLOCK_SIZE_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
- *aSRpnt = SRpnt;
- if ((STp->buffer)->syscall_result != 0) {
- printk (KERN_ERR "%s:E: Couldn't set tape block size mode page\n", name);
- return (-EIO);
- }
-
-#if DEBUG
- printk(KERN_INFO "%s:D: Drive Block Size changed to 32.5K\n", name);
- /*
- * In debug mode, we want to see as many errors as possible
- * to test the error recovery mechanism.
- */
- osst_set_retries(STp, aSRpnt, 0);
- SRpnt = * aSRpnt;
-#endif
-
- /*
- * Set vendor name to 'LIN4' for "Linux support version 4".
- */
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SELECT;
- cmd[1] = 0x10;
- cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
- header->mode_data_length = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH - 1;
- header->medium_type = 0; /* Medium Type - ignoring */
- header->dsp = 0; /* Reserved */
- header->bdl = 0; /* Block Descriptor Length */
-
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = VENDOR_IDENT_PAGE | (1 << 7);
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 6;
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 'L';
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 'I';
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 4] = 'N';
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 5] = '4';
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 6] = 0;
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 7] = 0;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
- *aSRpnt = SRpnt;
-
- if ((STp->buffer)->syscall_result != 0) {
- printk (KERN_ERR "%s:E: Couldn't set vendor name to %s\n", name,
- (char *) ((STp->buffer)->b_data + MODE_HEADER_LENGTH + 2));
- return (-EIO);
- }
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SENSE;
- cmd[1] = 8;
- cmd[2] = CAPABILITIES_PAGE;
- cmd[4] = CAPABILITIES_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
- *aSRpnt = SRpnt;
-
- if ((STp->buffer)->syscall_result != 0) {
- printk (KERN_ERR "%s:E: Can't get capabilities page\n", name);
- return (-EIO);
- }
-
- header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
- cp = (osst_capabilities_page_t *) ((STp->buffer)->b_data +
- sizeof(osst_mode_parameter_header_t) + header->bdl);
-
- drive_buffer_size = ntohs(cp->buffer_size) / 2;
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SENSE;
- cmd[1] = 8;
- cmd[2] = TAPE_PARAMTR_PAGE;
- cmd[4] = TAPE_PARAMTR_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
- *aSRpnt = SRpnt;
-
- if ((STp->buffer)->syscall_result != 0) {
- printk (KERN_ERR "%s:E: Can't get tape parameter page\n", name);
- return (-EIO);
- }
-
- header = (osst_mode_parameter_header_t *) (STp->buffer)->b_data;
- prm = (osst_tape_paramtr_page_t *) ((STp->buffer)->b_data +
- sizeof(osst_mode_parameter_header_t) + header->bdl);
-
- STp->density = prm->density;
- STp->capacity = ntohs(prm->segtrk) * ntohs(prm->trks);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Density %d, tape length: %dMB, drive buffer size: %dKB\n",
- name, STp->density, STp->capacity / 32, drive_buffer_size);
-#endif
-
- return 0;
-
-}
-
-
-/* Step over EOF if it has been inadvertently crossed (ioctl not used because
- it messes up the block number). */
-static int cross_eof(struct osst_tape *STp, struct osst_request ** aSRpnt, int forward)
-{
- int result;
- char * name = tape_name(STp);
-
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Stepping over filemark %s.\n",
- name, forward ? "forward" : "backward");
-#endif
-
- if (forward) {
- /* assumes that the filemark is already read by the drive, so this is low cost */
- result = osst_space_over_filemarks_forward_slow(STp, aSRpnt, MTFSF, 1);
- }
- else
- /* assumes this is only called if we just read the filemark! */
- result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - 1);
-
- if (result < 0)
- printk(KERN_WARNING "%s:W: Stepping over filemark %s failed.\n",
- name, forward ? "forward" : "backward");
-
- return result;
-}
-
-
-/* Get the tape position. */
-
-static int osst_get_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt)
-{
- unsigned char scmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- int result = 0;
- char * name = tape_name(STp);
-
- /* KG: We want to be able to use it for checking Write Buffer availability
- * and thus don't want to risk to overwrite anything. Exchange buffers ... */
- char mybuf[24];
- char * olddata = STp->buffer->b_data;
- int oldsize = STp->buffer->buffer_size;
-
- if (STp->ready != ST_READY) return (-EIO);
-
- memset (scmd, 0, MAX_COMMAND_SIZE);
- scmd[0] = READ_POSITION;
-
- STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
- SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
- STp->timeout, MAX_RETRIES, 1);
- if (!SRpnt) {
- STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
- return (-EBUSY);
- }
- *aSRpnt = SRpnt;
-
- if (STp->buffer->syscall_result)
- result = ((SRpnt->sense[2] & 0x0f) == 3) ? -EIO : -EINVAL; /* 3: Write Error */
-
- if (result == -EINVAL)
- printk(KERN_ERR "%s:E: Can't read tape position.\n", name);
- else {
- if (result == -EIO) { /* re-read position - this needs to preserve media errors */
- unsigned char mysense[16];
- memcpy (mysense, SRpnt->sense, 16);
- memset (scmd, 0, MAX_COMMAND_SIZE);
- scmd[0] = READ_POSITION;
- STp->buffer->b_data = mybuf; STp->buffer->buffer_size = 24;
- SRpnt = osst_do_scsi(SRpnt, STp, scmd, 20, DMA_FROM_DEVICE,
- STp->timeout, MAX_RETRIES, 1);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reread position, reason=[%02x:%02x:%02x], result=[%s%02x:%02x:%02x]\n",
- name, mysense[2], mysense[12], mysense[13], STp->buffer->syscall_result?"":"ok:",
- SRpnt->sense[2],SRpnt->sense[12],SRpnt->sense[13]);
-#endif
- if (!STp->buffer->syscall_result)
- memcpy (SRpnt->sense, mysense, 16);
- else
- printk(KERN_WARNING "%s:W: Double error in get position\n", name);
- }
- STp->first_frame_position = ((STp->buffer)->b_data[4] << 24)
- + ((STp->buffer)->b_data[5] << 16)
- + ((STp->buffer)->b_data[6] << 8)
- + (STp->buffer)->b_data[7];
- STp->last_frame_position = ((STp->buffer)->b_data[ 8] << 24)
- + ((STp->buffer)->b_data[ 9] << 16)
- + ((STp->buffer)->b_data[10] << 8)
- + (STp->buffer)->b_data[11];
- STp->cur_frames = (STp->buffer)->b_data[15];
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG "%s:D: Drive Positions: host %d, tape %d%s, buffer %d\n", name,
- STp->first_frame_position, STp->last_frame_position,
- ((STp->buffer)->b_data[0]&0x80)?" (BOP)":
- ((STp->buffer)->b_data[0]&0x40)?" (EOP)":"",
- STp->cur_frames);
- }
-#endif
- if (STp->cur_frames == 0 && STp->first_frame_position != STp->last_frame_position) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Correcting read position %d, %d, %d\n", name,
- STp->first_frame_position, STp->last_frame_position, STp->cur_frames);
-#endif
- STp->first_frame_position = STp->last_frame_position;
- }
- }
- STp->buffer->b_data = olddata; STp->buffer->buffer_size = oldsize;
-
- return (result == 0 ? STp->first_frame_position : result);
-}
-
-
-/* Set the tape block */
-static int osst_set_frame_position(struct osst_tape *STp, struct osst_request ** aSRpnt, int ppos, int skip)
-{
- unsigned char scmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- struct st_partstat * STps;
- int result = 0;
- int pp = (ppos == 3000 && !skip)? 0 : ppos;
- char * name = tape_name(STp);
-
- if (STp->ready != ST_READY) return (-EIO);
-
- STps = &(STp->ps[STp->partition]);
-
- if (ppos < 0 || ppos > STp->capacity) {
- printk(KERN_WARNING "%s:W: Reposition request %d out of range\n", name, ppos);
- pp = ppos = ppos < 0 ? 0 : (STp->capacity - 1);
- result = (-EINVAL);
- }
-
- do {
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Setting ppos to %d.\n", name, pp);
-#endif
- memset (scmd, 0, MAX_COMMAND_SIZE);
- scmd[0] = SEEK_10;
- scmd[1] = 1;
- scmd[3] = (pp >> 24);
- scmd[4] = (pp >> 16);
- scmd[5] = (pp >> 8);
- scmd[6] = pp;
- if (skip)
- scmd[9] = 0x80;
-
- SRpnt = osst_do_scsi(*aSRpnt, STp, scmd, 0, DMA_NONE, STp->long_timeout,
- MAX_RETRIES, 1);
- if (!SRpnt)
- return (-EBUSY);
- *aSRpnt = SRpnt;
-
- if ((STp->buffer)->syscall_result != 0) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: SEEK command from %d to %d failed.\n",
- name, STp->first_frame_position, pp);
-#endif
- result = (-EIO);
- }
- if (pp != ppos)
- osst_wait_ready(STp, aSRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
- } while ((pp != ppos) && (pp = ppos));
- STp->first_frame_position = STp->last_frame_position = ppos;
- STps->eof = ST_NOEOF;
- STps->at_sm = 0;
- STps->rw = ST_IDLE;
- STp->frame_in_buffer = 0;
- return result;
-}
-
-static int osst_write_trailer(struct osst_tape *STp, struct osst_request ** aSRpnt, int leave_at_EOT)
-{
- struct st_partstat * STps = &(STp->ps[STp->partition]);
- int result = 0;
-
- if (STp->write_type != OS_WRITE_NEW_MARK) {
- /* true unless the user wrote the filemark for us */
- result = osst_flush_drive_buffer(STp, aSRpnt);
- if (result < 0) goto out;
- result = osst_write_filemark(STp, aSRpnt);
- if (result < 0) goto out;
-
- if (STps->drv_file >= 0)
- STps->drv_file++ ;
- STps->drv_block = 0;
- }
- result = osst_write_eod(STp, aSRpnt);
- osst_write_header(STp, aSRpnt, leave_at_EOT);
-
- STps->eof = ST_FM;
-out:
- return result;
-}
-
-/* osst versions of st functions - augmented and stripped to suit OnStream only */
-
-/* Flush the write buffer (never need to write if variable blocksize). */
-static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request ** aSRpnt)
-{
- int offset, transfer, blks = 0;
- int result = 0;
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt = *aSRpnt;
- struct st_partstat * STps;
- char * name = tape_name(STp);
-
- if ((STp->buffer)->writing) {
- if (SRpnt == (STp->buffer)->last_SRpnt)
-#if DEBUG
- { printk(OSST_DEB_MSG
- "%s:D: aSRpnt points to osst_request that write_behind_check will release -- cleared\n", name);
-#endif
- *aSRpnt = SRpnt = NULL;
-#if DEBUG
- } else if (SRpnt)
- printk(OSST_DEB_MSG
- "%s:D: aSRpnt does not point to osst_request that write_behind_check will release -- strange\n", name);
-#endif
- osst_write_behind_check(STp);
- if ((STp->buffer)->syscall_result) {
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Async write error (flush) %x.\n",
- name, (STp->buffer)->midlevel_result);
-#endif
- if ((STp->buffer)->midlevel_result == INT_MAX)
- return (-ENOSPC);
- return (-EIO);
- }
- }
-
- result = 0;
- if (STp->dirty == 1) {
-
- STp->write_count++;
- STps = &(STp->ps[STp->partition]);
- STps->rw = ST_WRITING;
- offset = STp->buffer->buffer_bytes;
- blks = (offset + STp->block_size - 1) / STp->block_size;
- transfer = OS_FRAME_SIZE;
-
- if (offset < OS_DATA_SIZE)
- osst_zero_buffer_tail(STp->buffer);
-
- if (STp->poll)
- if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -50, 120))
- result = osst_recover_wait_frame(STp, aSRpnt, 1);
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = WRITE_6;
- cmd[1] = 1;
- cmd[4] = 1;
-
- switch (STp->write_type) {
- case OS_WRITE_DATA:
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n",
- name, blks, STp->frame_seq_number,
- STp->logical_blk_num - blks, STp->logical_blk_num - 1);
-#endif
- osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
- STp->logical_blk_num - blks, STp->block_size, blks);
- break;
- case OS_WRITE_EOD:
- osst_init_aux(STp, OS_FRAME_TYPE_EOD, STp->frame_seq_number++,
- STp->logical_blk_num, 0, 0);
- break;
- case OS_WRITE_NEW_MARK:
- osst_init_aux(STp, OS_FRAME_TYPE_MARKER, STp->frame_seq_number++,
- STp->logical_blk_num++, 0, blks=1);
- break;
- case OS_WRITE_HEADER:
- osst_init_aux(STp, OS_FRAME_TYPE_HEADER, 0, 0, 0, blks=0);
- break;
- default: /* probably FILLER */
- osst_init_aux(STp, OS_FRAME_TYPE_FILL, 0, 0, 0, 0);
- }
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n",
- name, offset, transfer, blks);
-#endif
-
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, transfer, DMA_TO_DEVICE,
- STp->timeout, MAX_RETRIES, 1);
- *aSRpnt = SRpnt;
- if (!SRpnt)
- return (-EBUSY);
-
- if ((STp->buffer)->syscall_result != 0) {
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: write sense [0]=0x%02x [2]=%02x [12]=%02x [13]=%02x\n",
- name, SRpnt->sense[0], SRpnt->sense[2],
- SRpnt->sense[12], SRpnt->sense[13]);
-#endif
- if ((SRpnt->sense[0] & 0x70) == 0x70 &&
- (SRpnt->sense[2] & 0x40) && /* FIXME - SC-30 drive doesn't assert EOM bit */
- (SRpnt->sense[2] & 0x0f) == NO_SENSE) {
- STp->dirty = 0;
- (STp->buffer)->buffer_bytes = 0;
- result = (-ENOSPC);
- }
- else {
- if (osst_write_error_recovery(STp, aSRpnt, 1)) {
- printk(KERN_ERR "%s:E: Error on flush write.\n", name);
- result = (-EIO);
- }
- }
- STps->drv_block = (-1); /* FIXME - even if write recovery succeeds? */
- }
- else {
- STp->first_frame_position++;
- STp->dirty = 0;
- (STp->buffer)->buffer_bytes = 0;
- }
- }
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Exit flush write buffer with code %d\n", name, result);
-#endif
- return result;
-}
-
-
-/* Flush the tape buffer. The tape will be positioned correctly unless
- seek_next is true. */
-static int osst_flush_buffer(struct osst_tape * STp, struct osst_request ** aSRpnt, int seek_next)
-{
- struct st_partstat * STps;
- int backspace = 0, result = 0;
-#if DEBUG
- char * name = tape_name(STp);
-#endif
-
- /*
- * If there was a bus reset, block further access
- * to this device.
- */
- if( STp->pos_unknown)
- return (-EIO);
-
- if (STp->ready != ST_READY)
- return 0;
-
- STps = &(STp->ps[STp->partition]);
- if (STps->rw == ST_WRITING || STp->dirty) { /* Writing */
- STp->write_type = OS_WRITE_DATA;
- return osst_flush_write_buffer(STp, aSRpnt);
- }
- if (STp->block_size == 0)
- return 0;
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reached flush (read) buffer\n", name);
-#endif
-
- if (!STp->can_bsr) {
- backspace = ((STp->buffer)->buffer_bytes + (STp->buffer)->read_pointer) / STp->block_size -
- ((STp->buffer)->read_pointer + STp->block_size - 1 ) / STp->block_size ;
- (STp->buffer)->buffer_bytes = 0;
- (STp->buffer)->read_pointer = 0;
- STp->frame_in_buffer = 0; /* FIXME is this relevant w. OSST? */
- }
-
- if (!seek_next) {
- if (STps->eof == ST_FM_HIT) {
- result = cross_eof(STp, aSRpnt, 0); /* Back over the EOF hit */
- if (!result)
- STps->eof = ST_NOEOF;
- else {
- if (STps->drv_file >= 0)
- STps->drv_file++;
- STps->drv_block = 0;
- }
- }
- if (!result && backspace > 0) /* TODO -- design and run a test case for this */
- result = osst_seek_logical_blk(STp, aSRpnt, STp->logical_blk_num - backspace);
- }
- else if (STps->eof == ST_FM_HIT) {
- if (STps->drv_file >= 0)
- STps->drv_file++;
- STps->drv_block = 0;
- STps->eof = ST_NOEOF;
- }
-
- return result;
-}
-
-static int osst_write_frame(struct osst_tape * STp, struct osst_request ** aSRpnt, int synchronous)
-{
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt;
- int blks;
-#if DEBUG
- char * name = tape_name(STp);
-#endif
-
- if ((!STp-> raw) && (STp->first_frame_position == 0xbae)) { /* _must_ preserve buffer! */
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Reaching config partition.\n", name);
-#endif
- if (osst_flush_drive_buffer(STp, aSRpnt) < 0) {
- return (-EIO);
- }
- /* error recovery may have bumped us past the header partition */
- if (osst_get_frame_position(STp, aSRpnt) < 0xbb8) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Skipping over config partition.\n", name);
-#endif
- osst_position_tape_and_confirm(STp, aSRpnt, 0xbb8);
- }
- }
-
- if (STp->poll)
- if (osst_wait_frame (STp, aSRpnt, STp->first_frame_position, -48, 120))
- if (osst_recover_wait_frame(STp, aSRpnt, 1))
- return (-EIO);
-
-// osst_build_stats(STp, &SRpnt);
-
- STp->ps[STp->partition].rw = ST_WRITING;
- STp->write_type = OS_WRITE_DATA;
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = WRITE_6;
- cmd[1] = 1;
- cmd[4] = 1; /* one frame at a time... */
- blks = STp->buffer->buffer_bytes / STp->block_size;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Writing %d blocks to frame %d, lblks %d-%d\n", name, blks,
- STp->frame_seq_number, STp->logical_blk_num - blks, STp->logical_blk_num - 1);
-#endif
- osst_init_aux(STp, OS_FRAME_TYPE_DATA, STp->frame_seq_number++,
- STp->logical_blk_num - blks, STp->block_size, blks);
-
-#if DEBUG
- if (!synchronous)
- STp->write_pending = 1;
-#endif
- SRpnt = osst_do_scsi(*aSRpnt, STp, cmd, OS_FRAME_SIZE, DMA_TO_DEVICE, STp->timeout,
- MAX_RETRIES, synchronous);
- if (!SRpnt)
- return (-EBUSY);
- *aSRpnt = SRpnt;
-
- if (synchronous) {
- if (STp->buffer->syscall_result != 0) {
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Error on write:\n", name);
-#endif
- if ((SRpnt->sense[0] & 0x70) == 0x70 &&
- (SRpnt->sense[2] & 0x40)) {
- if ((SRpnt->sense[2] & 0x0f) == VOLUME_OVERFLOW)
- return (-ENOSPC);
- }
- else {
- if (osst_write_error_recovery(STp, aSRpnt, 1))
- return (-EIO);
- }
- }
- else
- STp->first_frame_position++;
- }
-
- STp->write_count++;
-
- return 0;
-}
-
-/* Lock or unlock the drive door. Don't use when struct osst_request allocated. */
-static int do_door_lock(struct osst_tape * STp, int do_lock)
-{
- int retval;
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl");
-#endif
-
- retval = scsi_set_medium_removal(STp->device,
- do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
- if (!retval)
- STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
- else
- STp->door_locked = ST_LOCK_FAILS;
- return retval;
-}
-
-/* Set the internal state after reset */
-static void reset_state(struct osst_tape *STp)
-{
- int i;
- struct st_partstat *STps;
-
- STp->pos_unknown = 0;
- for (i = 0; i < ST_NBR_PARTITIONS; i++) {
- STps = &(STp->ps[i]);
- STps->rw = ST_IDLE;
- STps->eof = ST_NOEOF;
- STps->at_sm = 0;
- STps->last_block_valid = 0;
- STps->drv_block = -1;
- STps->drv_file = -1;
- }
-}
-
-
-/* Entry points to osst */
-
-/* Write command */
-static ssize_t osst_write(struct file * filp, const char __user * buf, size_t count, loff_t *ppos)
-{
- ssize_t total, retval = 0;
- ssize_t i, do_count, blks, transfer;
- int write_threshold;
- int doing_write = 0;
- const char __user * b_point;
- struct osst_request * SRpnt = NULL;
- struct st_modedef * STm;
- struct st_partstat * STps;
- struct osst_tape * STp = filp->private_data;
- char * name = tape_name(STp);
-
-
- if (mutex_lock_interruptible(&STp->lock))
- return (-ERESTARTSYS);
-
- /*
- * If we are in the middle of error recovery, don't let anyone
- * else try and use this device. Also, if error recovery fails, it
- * may try and take the device offline, in which case all further
- * access to the device is prohibited.
- */
- if( !scsi_block_when_processing_errors(STp->device) ) {
- retval = (-ENXIO);
- goto out;
- }
-
- if (STp->ready != ST_READY) {
- if (STp->ready == ST_NO_TAPE)
- retval = (-ENOMEDIUM);
- else
- retval = (-EIO);
- goto out;
- }
- STm = &(STp->modes[STp->current_mode]);
- if (!STm->defined) {
- retval = (-ENXIO);
- goto out;
- }
- if (count == 0)
- goto out;
-
- /*
- * If there was a bus reset, block further access
- * to this device.
- */
- if (STp->pos_unknown) {
- retval = (-EIO);
- goto out;
- }
-
-#if DEBUG
- if (!STp->in_use) {
- printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
- retval = (-EIO);
- goto out;
- }
-#endif
-
- if (STp->write_prot) {
- retval = (-EACCES);
- goto out;
- }
-
- /* Write must be integral number of blocks */
- if (STp->block_size != 0 && (count % STp->block_size) != 0) {
- printk(KERN_ERR "%s:E: Write (%zd bytes) not multiple of tape block size (%d%c).\n",
- name, count, STp->block_size<1024?
- STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
- retval = (-EINVAL);
- goto out;
- }
-
- if (STp->first_frame_position >= STp->capacity - OSST_EOM_RESERVE) {
- printk(KERN_ERR "%s:E: Write truncated at EOM early warning (frame %d).\n",
- name, STp->first_frame_position);
- retval = (-ENOSPC);
- goto out;
- }
-
- if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
- STp->door_locked = ST_LOCKED_AUTO;
-
- STps = &(STp->ps[STp->partition]);
-
- if (STps->rw == ST_READING) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Switching from read to write at file %d, block %d\n", name,
- STps->drv_file, STps->drv_block);
-#endif
- retval = osst_flush_buffer(STp, &SRpnt, 0);
- if (retval)
- goto out;
- STps->rw = ST_IDLE;
- }
- if (STps->rw != ST_WRITING) {
- /* Are we totally rewriting this tape? */
- if (!STp->header_ok ||
- (STp->first_frame_position == STp->first_data_ppos && STps->drv_block < 0) ||
- (STps->drv_file == 0 && STps->drv_block == 0)) {
- STp->wrt_pass_cntr++;
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Allocating next write pass counter: %d\n",
- name, STp->wrt_pass_cntr);
-#endif
- osst_reset_header(STp, &SRpnt);
- STps->drv_file = STps->drv_block = 0;
- }
- /* Do we know where we'll be writing on the tape? */
- else {
- if ((STp->fast_open && osst_verify_position(STp, &SRpnt)) ||
- STps->drv_file < 0 || STps->drv_block < 0) {
- if (STp->first_frame_position == STp->eod_frame_ppos) { /* at EOD */
- STps->drv_file = STp->filemark_cnt;
- STps->drv_block = 0;
- }
- else {
- /* We have no idea where the tape is positioned - give up */
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: Cannot write at indeterminate position.\n", name);
-#endif
- retval = (-EIO);
- goto out;
- }
- }
- if ((STps->drv_file + STps->drv_block) > 0 && STps->drv_file < STp->filemark_cnt) {
- STp->filemark_cnt = STps->drv_file;
- STp->last_mark_ppos =
- ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[STp->filemark_cnt-1]);
- printk(KERN_WARNING
- "%s:W: Overwriting file %d with old write pass counter %d\n",
- name, STps->drv_file, STp->wrt_pass_cntr);
- printk(KERN_WARNING
- "%s:W: may lead to stale data being accepted on reading back!\n",
- name);
-#if DEBUG
- printk(OSST_DEB_MSG
- "%s:D: resetting filemark count to %d and last mark ppos,lbn to %d,%d\n",
- name, STp->filemark_cnt, STp->last_mark_ppos, STp->last_mark_lbn);
-#endif
- }
- }
- STp->fast_open = 0;
- }
- if (!STp->header_ok) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Write cannot proceed without valid headers\n", name);
-#endif
- retval = (-EIO);
- goto out;
- }
-
- if ((STp->buffer)->writing) {
-if (SRpnt) printk(KERN_ERR "%s:A: Not supposed to have SRpnt at line %d\n", name, __LINE__);
- osst_write_behind_check(STp);
- if ((STp->buffer)->syscall_result) {
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Async write error (write) %x.\n", name,
- (STp->buffer)->midlevel_result);
-#endif
- if ((STp->buffer)->midlevel_result == INT_MAX)
- STps->eof = ST_EOM_OK;
- else
- STps->eof = ST_EOM_ERROR;
- }
- }
- if (STps->eof == ST_EOM_OK) {
- retval = (-ENOSPC);
- goto out;
- }
- else if (STps->eof == ST_EOM_ERROR) {
- retval = (-EIO);
- goto out;
- }
-
- /* Check the buffer readability in cases where copy_user might catch
- the problems after some tape movement. */
- if ((copy_from_user(&i, buf, 1) != 0 ||
- copy_from_user(&i, buf + count - 1, 1) != 0)) {
- retval = (-EFAULT);
- goto out;
- }
-
- if (!STm->do_buffer_writes) {
- write_threshold = 1;
- }
- else
- write_threshold = (STp->buffer)->buffer_blocks * STp->block_size;
- if (!STm->do_async_writes)
- write_threshold--;
-
- total = count;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Writing %d bytes to file %d block %d lblk %d fseq %d fppos %d\n",
- name, (int) count, STps->drv_file, STps->drv_block,
- STp->logical_blk_num, STp->frame_seq_number, STp->first_frame_position);
-#endif
- b_point = buf;
- while ((STp->buffer)->buffer_bytes + count > write_threshold)
- {
- doing_write = 1;
- do_count = (STp->buffer)->buffer_blocks * STp->block_size -
- (STp->buffer)->buffer_bytes;
- if (do_count > count)
- do_count = count;
-
- i = append_to_buffer(b_point, STp->buffer, do_count);
- if (i) {
- retval = i;
- goto out;
- }
-
- blks = do_count / STp->block_size;
- STp->logical_blk_num += blks; /* logical_blk_num is incremented as data is moved from user */
-
- i = osst_write_frame(STp, &SRpnt, 1);
-
- if (i == (-ENOSPC)) {
- transfer = STp->buffer->writing; /* FIXME -- check this logic */
- if (transfer <= do_count) {
- *ppos += do_count - transfer;
- count -= do_count - transfer;
- if (STps->drv_block >= 0) {
- STps->drv_block += (do_count - transfer) / STp->block_size;
- }
- STps->eof = ST_EOM_OK;
- retval = (-ENOSPC); /* EOM within current request */
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: EOM with %d bytes unwritten.\n",
- name, (int) transfer);
-#endif
- }
- else {
- STps->eof = ST_EOM_ERROR;
- STps->drv_block = (-1); /* Too cautious? */
- retval = (-EIO); /* EOM for old data */
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: EOM with lost data.\n", name);
-#endif
- }
- }
- else
- retval = i;
-
- if (retval < 0) {
- if (SRpnt != NULL) {
- osst_release_request(SRpnt);
- SRpnt = NULL;
- }
- STp->buffer->buffer_bytes = 0;
- STp->dirty = 0;
- if (count < total)
- retval = total - count;
- goto out;
- }
-
- *ppos += do_count;
- b_point += do_count;
- count -= do_count;
- if (STps->drv_block >= 0) {
- STps->drv_block += blks;
- }
- STp->buffer->buffer_bytes = 0;
- STp->dirty = 0;
- } /* end while write threshold exceeded */
-
- if (count != 0) {
- STp->dirty = 1;
- i = append_to_buffer(b_point, STp->buffer, count);
- if (i) {
- retval = i;
- goto out;
- }
- blks = count / STp->block_size;
- STp->logical_blk_num += blks;
- if (STps->drv_block >= 0) {
- STps->drv_block += blks;
- }
- *ppos += count;
- count = 0;
- }
-
- if (doing_write && (STp->buffer)->syscall_result != 0) {
- retval = (STp->buffer)->syscall_result;
- goto out;
- }
-
- if (STm->do_async_writes && ((STp->buffer)->buffer_bytes >= STp->write_threshold)) {
- /* Schedule an asynchronous write */
- (STp->buffer)->writing = ((STp->buffer)->buffer_bytes /
- STp->block_size) * STp->block_size;
- STp->dirty = !((STp->buffer)->writing ==
- (STp->buffer)->buffer_bytes);
-
- i = osst_write_frame(STp, &SRpnt, 0);
- if (i < 0) {
- retval = (-EIO);
- goto out;
- }
- SRpnt = NULL; /* Prevent releasing this request! */
- }
- STps->at_sm &= (total == 0);
- if (total > 0)
- STps->eof = ST_NOEOF;
-
- retval = total;
-
-out:
- if (SRpnt != NULL) osst_release_request(SRpnt);
-
- mutex_unlock(&STp->lock);
-
- return retval;
-}
-
-
-/* Read command */
-static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, loff_t *ppos)
-{
- ssize_t total, retval = 0;
- ssize_t i, transfer;
- int special;
- struct st_modedef * STm;
- struct st_partstat * STps;
- struct osst_request * SRpnt = NULL;
- struct osst_tape * STp = filp->private_data;
- char * name = tape_name(STp);
-
-
- if (mutex_lock_interruptible(&STp->lock))
- return (-ERESTARTSYS);
-
- /*
- * If we are in the middle of error recovery, don't let anyone
- * else try and use this device. Also, if error recovery fails, it
- * may try and take the device offline, in which case all further
- * access to the device is prohibited.
- */
- if( !scsi_block_when_processing_errors(STp->device) ) {
- retval = (-ENXIO);
- goto out;
- }
-
- if (STp->ready != ST_READY) {
- if (STp->ready == ST_NO_TAPE)
- retval = (-ENOMEDIUM);
- else
- retval = (-EIO);
- goto out;
- }
- STm = &(STp->modes[STp->current_mode]);
- if (!STm->defined) {
- retval = (-ENXIO);
- goto out;
- }
-#if DEBUG
- if (!STp->in_use) {
- printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
- retval = (-EIO);
- goto out;
- }
-#endif
- /* Must have initialized medium */
- if (!STp->header_ok) {
- retval = (-EIO);
- goto out;
- }
-
- if (STp->do_auto_lock && STp->door_locked == ST_UNLOCKED && !do_door_lock(STp, 1))
- STp->door_locked = ST_LOCKED_AUTO;
-
- STps = &(STp->ps[STp->partition]);
- if (STps->rw == ST_WRITING) {
- retval = osst_flush_buffer(STp, &SRpnt, 0);
- if (retval)
- goto out;
- STps->rw = ST_IDLE;
- /* FIXME -- this may leave the tape without EOD and up2date headers */
- }
-
- if ((count % STp->block_size) != 0) {
- printk(KERN_WARNING
- "%s:W: Read (%zd bytes) not multiple of tape block size (%d%c).\n", name, count,
- STp->block_size<1024?STp->block_size:STp->block_size/1024, STp->block_size<1024?'b':'k');
- }
-
-#if DEBUG
- if (debugging && STps->eof != ST_NOEOF)
- printk(OSST_DEB_MSG "%s:D: EOF/EOM flag up (%d). Bytes %d\n", name,
- STps->eof, (STp->buffer)->buffer_bytes);
-#endif
- if ((STp->buffer)->buffer_bytes == 0 &&
- STps->eof >= ST_EOD_1) {
- if (STps->eof < ST_EOD) {
- STps->eof += 1;
- retval = 0;
- goto out;
- }
- retval = (-EIO); /* EOM or Blank Check */
- goto out;
- }
-
- /* Check the buffer writability before any tape movement. Don't alter
- buffer data. */
- if (copy_from_user(&i, buf, 1) != 0 ||
- copy_to_user (buf, &i, 1) != 0 ||
- copy_from_user(&i, buf + count - 1, 1) != 0 ||
- copy_to_user (buf + count - 1, &i, 1) != 0) {
- retval = (-EFAULT);
- goto out;
- }
-
- /* Loop until enough data in buffer or a special condition found */
- for (total = 0, special = 0; total < count - STp->block_size + 1 && !special; ) {
-
- /* Get new data if the buffer is empty */
- if ((STp->buffer)->buffer_bytes == 0) {
- if (STps->eof == ST_FM_HIT)
- break;
- special = osst_get_logical_frame(STp, &SRpnt, STp->frame_seq_number, 0);
- if (special < 0) { /* No need to continue read */
- STp->frame_in_buffer = 0;
- retval = special;
- goto out;
- }
- }
-
- /* Move the data from driver buffer to user buffer */
- if ((STp->buffer)->buffer_bytes > 0) {
-#if DEBUG
- if (debugging && STps->eof != ST_NOEOF)
- printk(OSST_DEB_MSG "%s:D: EOF up (%d). Left %d, needed %d.\n", name,
- STps->eof, (STp->buffer)->buffer_bytes, (int) (count - total));
-#endif
- /* force multiple of block size, note block_size may have been adjusted */
- transfer = (((STp->buffer)->buffer_bytes < count - total ?
- (STp->buffer)->buffer_bytes : count - total)/
- STp->block_size) * STp->block_size;
-
- if (transfer == 0) {
- printk(KERN_WARNING
- "%s:W: Nothing can be transferred, requested %zd, tape block size (%d%c).\n",
- name, count, STp->block_size < 1024?
- STp->block_size:STp->block_size/1024,
- STp->block_size<1024?'b':'k');
- break;
- }
- i = from_buffer(STp->buffer, buf, transfer);
- if (i) {
- retval = i;
- goto out;
- }
- STp->logical_blk_num += transfer / STp->block_size;
- STps->drv_block += transfer / STp->block_size;
- *ppos += transfer;
- buf += transfer;
- total += transfer;
- }
-
- if ((STp->buffer)->buffer_bytes == 0) {
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Finished with frame %d\n",
- name, STp->frame_seq_number);
-#endif
- STp->frame_in_buffer = 0;
- STp->frame_seq_number++; /* frame to look for next time */
- }
- } /* for (total = 0, special = 0; total < count && !special; ) */
-
- /* Change the eof state if no data from tape or buffer */
- if (total == 0) {
- if (STps->eof == ST_FM_HIT) {
- STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD_2:ST_FM;
- STps->drv_block = 0;
- if (STps->drv_file >= 0)
- STps->drv_file++;
- }
- else if (STps->eof == ST_EOD_1) {
- STps->eof = ST_EOD_2;
- if (STps->drv_block > 0 && STps->drv_file >= 0)
- STps->drv_file++;
- STps->drv_block = 0;
- }
- else if (STps->eof == ST_EOD_2)
- STps->eof = ST_EOD;
- }
- else if (STps->eof == ST_FM)
- STps->eof = ST_NOEOF;
-
- retval = total;
-
-out:
- if (SRpnt != NULL) osst_release_request(SRpnt);
-
- mutex_unlock(&STp->lock);
-
- return retval;
-}
-
-
-/* Set the driver options */
-static void osst_log_options(struct osst_tape *STp, struct st_modedef *STm, char *name)
-{
- printk(KERN_INFO
-"%s:I: Mode %d options: buffer writes: %d, async writes: %d, read ahead: %d\n",
- name, STp->current_mode, STm->do_buffer_writes, STm->do_async_writes,
- STm->do_read_ahead);
- printk(KERN_INFO
-"%s:I: can bsr: %d, two FMs: %d, fast mteom: %d, auto lock: %d,\n",
- name, STp->can_bsr, STp->two_fm, STp->fast_mteom, STp->do_auto_lock);
- printk(KERN_INFO
-"%s:I: defs for wr: %d, no block limits: %d, partitions: %d, s2 log: %d\n",
- name, STm->defaults_for_writes, STp->omit_blklims, STp->can_partitions,
- STp->scsi2_logical);
- printk(KERN_INFO
-"%s:I: sysv: %d\n", name, STm->sysv);
-#if DEBUG
- printk(KERN_INFO
- "%s:D: debugging: %d\n",
- name, debugging);
-#endif
-}
-
-
-static int osst_set_options(struct osst_tape *STp, long options)
-{
- int value;
- long code;
- struct st_modedef * STm;
- char * name = tape_name(STp);
-
- STm = &(STp->modes[STp->current_mode]);
- if (!STm->defined) {
- memcpy(STm, &(STp->modes[0]), sizeof(*STm));
- modes_defined = 1;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Initialized mode %d definition from mode 0\n",
- name, STp->current_mode);
-#endif
- }
-
- code = options & MT_ST_OPTIONS;
- if (code == MT_ST_BOOLEANS) {
- STm->do_buffer_writes = (options & MT_ST_BUFFER_WRITES) != 0;
- STm->do_async_writes = (options & MT_ST_ASYNC_WRITES) != 0;
- STm->defaults_for_writes = (options & MT_ST_DEF_WRITES) != 0;
- STm->do_read_ahead = (options & MT_ST_READ_AHEAD) != 0;
- STp->two_fm = (options & MT_ST_TWO_FM) != 0;
- STp->fast_mteom = (options & MT_ST_FAST_MTEOM) != 0;
- STp->do_auto_lock = (options & MT_ST_AUTO_LOCK) != 0;
- STp->can_bsr = (options & MT_ST_CAN_BSR) != 0;
- STp->omit_blklims = (options & MT_ST_NO_BLKLIMS) != 0;
- if ((STp->device)->scsi_level >= SCSI_2)
- STp->can_partitions = (options & MT_ST_CAN_PARTITIONS) != 0;
- STp->scsi2_logical = (options & MT_ST_SCSI2LOGICAL) != 0;
- STm->sysv = (options & MT_ST_SYSV) != 0;
-#if DEBUG
- debugging = (options & MT_ST_DEBUGGING) != 0;
-#endif
- osst_log_options(STp, STm, name);
- }
- else if (code == MT_ST_SETBOOLEANS || code == MT_ST_CLEARBOOLEANS) {
- value = (code == MT_ST_SETBOOLEANS);
- if ((options & MT_ST_BUFFER_WRITES) != 0)
- STm->do_buffer_writes = value;
- if ((options & MT_ST_ASYNC_WRITES) != 0)
- STm->do_async_writes = value;
- if ((options & MT_ST_DEF_WRITES) != 0)
- STm->defaults_for_writes = value;
- if ((options & MT_ST_READ_AHEAD) != 0)
- STm->do_read_ahead = value;
- if ((options & MT_ST_TWO_FM) != 0)
- STp->two_fm = value;
- if ((options & MT_ST_FAST_MTEOM) != 0)
- STp->fast_mteom = value;
- if ((options & MT_ST_AUTO_LOCK) != 0)
- STp->do_auto_lock = value;
- if ((options & MT_ST_CAN_BSR) != 0)
- STp->can_bsr = value;
- if ((options & MT_ST_NO_BLKLIMS) != 0)
- STp->omit_blklims = value;
- if ((STp->device)->scsi_level >= SCSI_2 &&
- (options & MT_ST_CAN_PARTITIONS) != 0)
- STp->can_partitions = value;
- if ((options & MT_ST_SCSI2LOGICAL) != 0)
- STp->scsi2_logical = value;
- if ((options & MT_ST_SYSV) != 0)
- STm->sysv = value;
-#if DEBUG
- if ((options & MT_ST_DEBUGGING) != 0)
- debugging = value;
-#endif
- osst_log_options(STp, STm, name);
- }
- else if (code == MT_ST_WRITE_THRESHOLD) {
- value = (options & ~MT_ST_OPTIONS) * ST_KILOBYTE;
- if (value < 1 || value > osst_buffer_size) {
- printk(KERN_WARNING "%s:W: Write threshold %d too small or too large.\n",
- name, value);
- return (-EIO);
- }
- STp->write_threshold = value;
- printk(KERN_INFO "%s:I: Write threshold set to %d bytes.\n",
- name, value);
- }
- else if (code == MT_ST_DEF_BLKSIZE) {
- value = (options & ~MT_ST_OPTIONS);
- if (value == ~MT_ST_OPTIONS) {
- STm->default_blksize = (-1);
- printk(KERN_INFO "%s:I: Default block size disabled.\n", name);
- }
- else {
- if (value < 512 || value > OS_DATA_SIZE || OS_DATA_SIZE % value) {
- printk(KERN_WARNING "%s:W: Default block size cannot be set to %d.\n",
- name, value);
- return (-EINVAL);
- }
- STm->default_blksize = value;
- printk(KERN_INFO "%s:I: Default block size set to %d bytes.\n",
- name, STm->default_blksize);
- }
- }
- else if (code == MT_ST_TIMEOUTS) {
- value = (options & ~MT_ST_OPTIONS);
- if ((value & MT_ST_SET_LONG_TIMEOUT) != 0) {
- STp->long_timeout = (value & ~MT_ST_SET_LONG_TIMEOUT) * HZ;
- printk(KERN_INFO "%s:I: Long timeout set to %d seconds.\n", name,
- (value & ~MT_ST_SET_LONG_TIMEOUT));
- }
- else {
- STp->timeout = value * HZ;
- printk(KERN_INFO "%s:I: Normal timeout set to %d seconds.\n", name, value);
- }
- }
- else if (code == MT_ST_DEF_OPTIONS) {
- code = (options & ~MT_ST_CLEAR_DEFAULT);
- value = (options & MT_ST_CLEAR_DEFAULT);
- if (code == MT_ST_DEF_DENSITY) {
- if (value == MT_ST_CLEAR_DEFAULT) {
- STm->default_density = (-1);
- printk(KERN_INFO "%s:I: Density default disabled.\n", name);
- }
- else {
- STm->default_density = value & 0xff;
- printk(KERN_INFO "%s:I: Density default set to %x\n",
- name, STm->default_density);
- }
- }
- else if (code == MT_ST_DEF_DRVBUFFER) {
- if (value == MT_ST_CLEAR_DEFAULT) {
- STp->default_drvbuffer = 0xff;
- printk(KERN_INFO "%s:I: Drive buffer default disabled.\n", name);
- }
- else {
- STp->default_drvbuffer = value & 7;
- printk(KERN_INFO "%s:I: Drive buffer default set to %x\n",
- name, STp->default_drvbuffer);
- }
- }
- else if (code == MT_ST_DEF_COMPRESSION) {
- if (value == MT_ST_CLEAR_DEFAULT) {
- STm->default_compression = ST_DONT_TOUCH;
- printk(KERN_INFO "%s:I: Compression default disabled.\n", name);
- }
- else {
- STm->default_compression = (value & 1 ? ST_YES : ST_NO);
- printk(KERN_INFO "%s:I: Compression default set to %x\n",
- name, (value & 1));
- }
- }
- }
- else
- return (-EIO);
-
- return 0;
-}
-
-
-/* Internal ioctl function */
-static int osst_int_ioctl(struct osst_tape * STp, struct osst_request ** aSRpnt,
- unsigned int cmd_in, unsigned long arg)
-{
- int timeout;
- long ltmp;
- int i, ioctl_result;
- int chg_eof = 1;
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt = * aSRpnt;
- struct st_partstat * STps;
- int fileno, blkno, at_sm, frame_seq_numbr, logical_blk_num;
- int datalen = 0, direction = DMA_NONE;
- char * name = tape_name(STp);
-
- if (STp->ready != ST_READY && cmd_in != MTLOAD) {
- if (STp->ready == ST_NO_TAPE)
- return (-ENOMEDIUM);
- else
- return (-EIO);
- }
- timeout = STp->long_timeout;
- STps = &(STp->ps[STp->partition]);
- fileno = STps->drv_file;
- blkno = STps->drv_block;
- at_sm = STps->at_sm;
- frame_seq_numbr = STp->frame_seq_number;
- logical_blk_num = STp->logical_blk_num;
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- switch (cmd_in) {
- case MTFSFM:
- chg_eof = 0; /* Changed from the FSF after this */
- /* fall through */
- case MTFSF:
- if (STp->raw)
- return (-EIO);
- if (STp->linux_media)
- ioctl_result = osst_space_over_filemarks_forward_fast(STp, &SRpnt, cmd_in, arg);
- else
- ioctl_result = osst_space_over_filemarks_forward_slow(STp, &SRpnt, cmd_in, arg);
- if (fileno >= 0)
- fileno += arg;
- blkno = 0;
- at_sm &= (arg == 0);
- goto os_bypass;
-
- case MTBSF:
- chg_eof = 0; /* Changed from the FSF after this */
- /* fall through */
- case MTBSFM:
- if (STp->raw)
- return (-EIO);
- ioctl_result = osst_space_over_filemarks_backward(STp, &SRpnt, cmd_in, arg);
- if (fileno >= 0)
- fileno -= arg;
- blkno = (-1); /* We can't know the block number */
- at_sm &= (arg == 0);
- goto os_bypass;
-
- case MTFSR:
- case MTBSR:
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Skipping %lu blocks %s from logical block %d\n",
- name, arg, cmd_in==MTFSR?"forward":"backward", logical_blk_num);
-#endif
- if (cmd_in == MTFSR) {
- logical_blk_num += arg;
- if (blkno >= 0) blkno += arg;
- }
- else {
- logical_blk_num -= arg;
- if (blkno >= 0) blkno -= arg;
- }
- ioctl_result = osst_seek_logical_blk(STp, &SRpnt, logical_blk_num);
- fileno = STps->drv_file;
- blkno = STps->drv_block;
- at_sm &= (arg == 0);
- goto os_bypass;
-
- case MTFSS:
- cmd[0] = SPACE;
- cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */
- cmd[2] = (arg >> 16);
- cmd[3] = (arg >> 8);
- cmd[4] = arg;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Spacing tape forward %d setmarks.\n", name,
- cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
-#endif
- if (arg != 0) {
- blkno = fileno = (-1);
- at_sm = 1;
- }
- break;
- case MTBSS:
- cmd[0] = SPACE;
- cmd[1] = 0x04; /* Space Setmarks */ /* FIXME -- OS can't do this? */
- ltmp = (-arg);
- cmd[2] = (ltmp >> 16);
- cmd[3] = (ltmp >> 8);
- cmd[4] = ltmp;
-#if DEBUG
- if (debugging) {
- if (cmd[2] & 0x80)
- ltmp = 0xff000000;
- ltmp = ltmp | (cmd[2] << 16) | (cmd[3] << 8) | cmd[4];
- printk(OSST_DEB_MSG "%s:D: Spacing tape backward %ld setmarks.\n",
- name, (-ltmp));
- }
-#endif
- if (arg != 0) {
- blkno = fileno = (-1);
- at_sm = 1;
- }
- break;
- case MTWEOF:
- if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
- STp->write_type = OS_WRITE_DATA;
- ioctl_result = osst_flush_write_buffer(STp, &SRpnt);
- } else
- ioctl_result = 0;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Writing %ld filemark(s).\n", name, arg);
-#endif
- for (i=0; i<arg; i++)
- ioctl_result |= osst_write_filemark(STp, &SRpnt);
- if (fileno >= 0) fileno += arg;
- if (blkno >= 0) blkno = 0;
- goto os_bypass;
-
- case MTWSM:
- if (STp->write_prot)
- return (-EACCES);
- if (!STp->raw)
- return 0;
- cmd[0] = WRITE_FILEMARKS; /* FIXME -- need OS version */
- if (cmd_in == MTWSM)
- cmd[1] = 2;
- cmd[2] = (arg >> 16);
- cmd[3] = (arg >> 8);
- cmd[4] = arg;
- timeout = STp->timeout;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Writing %d setmark(s).\n", name,
- cmd[2] * 65536 + cmd[3] * 256 + cmd[4]);
-#endif
- if (fileno >= 0)
- fileno += arg;
- blkno = 0;
- at_sm = (cmd_in == MTWSM);
- break;
- case MTOFFL:
- case MTLOAD:
- case MTUNLOAD:
- case MTRETEN:
- cmd[0] = START_STOP;
- cmd[1] = 1; /* Don't wait for completion */
- if (cmd_in == MTLOAD) {
- if (STp->ready == ST_NO_TAPE)
- cmd[4] = 4; /* open tray */
- else
- cmd[4] = 1; /* load */
- }
- if (cmd_in == MTRETEN)
- cmd[4] = 3; /* retension then mount */
- if (cmd_in == MTOFFL)
- cmd[4] = 4; /* rewind then eject */
- timeout = STp->timeout;
-#if DEBUG
- if (debugging) {
- switch (cmd_in) {
- case MTUNLOAD:
- printk(OSST_DEB_MSG "%s:D: Unloading tape.\n", name);
- break;
- case MTLOAD:
- printk(OSST_DEB_MSG "%s:D: Loading tape.\n", name);
- break;
- case MTRETEN:
- printk(OSST_DEB_MSG "%s:D: Retensioning tape.\n", name);
- break;
- case MTOFFL:
- printk(OSST_DEB_MSG "%s:D: Ejecting tape.\n", name);
- break;
- }
- }
-#endif
- fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
- break;
- case MTNOP:
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: No-op on tape.\n", name);
-#endif
- return 0; /* Should do something ? */
- break;
- case MTEOM:
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Spacing to end of recorded medium.\n", name);
-#endif
- if ((osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0) ||
- (osst_get_logical_frame(STp, &SRpnt, -1, 0) < 0)) {
- ioctl_result = -EIO;
- goto os_bypass;
- }
- if (STp->buffer->aux->frame_type != OS_FRAME_TYPE_EOD) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: No EOD frame found where expected.\n", name);
-#endif
- ioctl_result = -EIO;
- goto os_bypass;
- }
- ioctl_result = osst_set_frame_position(STp, &SRpnt, STp->eod_frame_ppos, 0);
- fileno = STp->filemark_cnt;
- blkno = at_sm = 0;
- goto os_bypass;
-
- case MTERASE:
- if (STp->write_prot)
- return (-EACCES);
- ioctl_result = osst_reset_header(STp, &SRpnt);
- i = osst_write_eod(STp, &SRpnt);
- if (i < ioctl_result) ioctl_result = i;
- i = osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos);
- if (i < ioctl_result) ioctl_result = i;
- fileno = blkno = at_sm = 0 ;
- goto os_bypass;
-
- case MTREW:
- cmd[0] = REZERO_UNIT; /* rewind */
- cmd[1] = 1;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Rewinding tape, Immed=%d.\n", name, cmd[1]);
-#endif
- fileno = blkno = at_sm = frame_seq_numbr = logical_blk_num = 0 ;
- break;
-
- case MTSETBLK: /* Set block length */
- if ((STps->drv_block == 0 ) &&
- !STp->dirty &&
- ((STp->buffer)->buffer_bytes == 0) &&
- ((arg & MT_ST_BLKSIZE_MASK) >= 512 ) &&
- ((arg & MT_ST_BLKSIZE_MASK) <= OS_DATA_SIZE) &&
- !(OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK)) ) {
- /*
- * Only allowed to change the block size if you opened the
- * device at the beginning of a file before writing anything.
- * Note, that when reading, changing block_size is futile,
- * as the size used when writing overrides it.
- */
- STp->block_size = (arg & MT_ST_BLKSIZE_MASK);
- printk(KERN_INFO "%s:I: Block size set to %d bytes.\n",
- name, STp->block_size);
- return 0;
- }
- /* fall through */
- case MTSETDENSITY: /* Set tape density */
- case MTSETDRVBUFFER: /* Set drive buffering */
- case SET_DENS_AND_BLK: /* Set density and block size */
- chg_eof = 0;
- if (STp->dirty || (STp->buffer)->buffer_bytes != 0)
- return (-EIO); /* Not allowed if data in buffer */
- if ((cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) &&
- (arg & MT_ST_BLKSIZE_MASK) != 0 &&
- (arg & MT_ST_BLKSIZE_MASK) != STp->block_size ) {
- printk(KERN_WARNING "%s:W: Illegal to set block size to %d%s.\n",
- name, (int)(arg & MT_ST_BLKSIZE_MASK),
- (OS_DATA_SIZE % (arg & MT_ST_BLKSIZE_MASK))?"":" now");
- return (-EINVAL);
- }
- return 0; /* FIXME silently ignore if block size didn't change */
-
- default:
- return (-ENOSYS);
- }
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, datalen, direction, timeout, MAX_RETRIES, 1);
-
- ioctl_result = (STp->buffer)->syscall_result;
-
- if (!SRpnt) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Couldn't exec scsi cmd for IOCTL\n", name);
-#endif
- return ioctl_result;
- }
-
- if (!ioctl_result) { /* SCSI command successful */
- STp->frame_seq_number = frame_seq_numbr;
- STp->logical_blk_num = logical_blk_num;
- }
-
-os_bypass:
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: IOCTL (%d) Result=%d\n", name, cmd_in, ioctl_result);
-#endif
-
- if (!ioctl_result) { /* success */
-
- if (cmd_in == MTFSFM) {
- fileno--;
- blkno--;
- }
- if (cmd_in == MTBSFM) {
- fileno++;
- blkno++;
- }
- STps->drv_block = blkno;
- STps->drv_file = fileno;
- STps->at_sm = at_sm;
-
- if (cmd_in == MTEOM)
- STps->eof = ST_EOD;
- else if ((cmd_in == MTFSFM || cmd_in == MTBSF) && STps->eof == ST_FM_HIT) {
- ioctl_result = osst_seek_logical_blk(STp, &SRpnt, STp->logical_blk_num-1);
- STps->drv_block++;
- STp->logical_blk_num++;
- STp->frame_seq_number++;
- STp->frame_in_buffer = 0;
- STp->buffer->read_pointer = 0;
- }
- else if (cmd_in == MTFSF)
- STps->eof = (STp->first_frame_position >= STp->eod_frame_ppos)?ST_EOD:ST_FM;
- else if (chg_eof)
- STps->eof = ST_NOEOF;
-
- if (cmd_in == MTOFFL || cmd_in == MTUNLOAD)
- STp->rew_at_close = 0;
- else if (cmd_in == MTLOAD) {
- for (i=0; i < ST_NBR_PARTITIONS; i++) {
- STp->ps[i].rw = ST_IDLE;
- STp->ps[i].last_block_valid = 0;/* FIXME - where else is this field maintained? */
- }
- STp->partition = 0;
- }
-
- if (cmd_in == MTREW) {
- ioctl_result = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);
- if (ioctl_result > 0)
- ioctl_result = 0;
- }
-
- } else if (cmd_in == MTBSF || cmd_in == MTBSFM ) {
- if (osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos) < 0)
- STps->drv_file = STps->drv_block = -1;
- else
- STps->drv_file = STps->drv_block = 0;
- STps->eof = ST_NOEOF;
- } else if (cmd_in == MTFSF || cmd_in == MTFSFM) {
- if (osst_position_tape_and_confirm(STp, &SRpnt, STp->eod_frame_ppos) < 0)
- STps->drv_file = STps->drv_block = -1;
- else {
- STps->drv_file = STp->filemark_cnt;
- STps->drv_block = 0;
- }
- STps->eof = ST_EOD;
- } else if (cmd_in == MTBSR || cmd_in == MTFSR || cmd_in == MTWEOF || cmd_in == MTEOM) {
- STps->drv_file = STps->drv_block = (-1);
- STps->eof = ST_NOEOF;
- STp->header_ok = 0;
- } else if (cmd_in == MTERASE) {
- STp->header_ok = 0;
- } else if (SRpnt) { /* SCSI command was not completely successful. */
- if (SRpnt->sense[2] & 0x40) {
- STps->eof = ST_EOM_OK;
- STps->drv_block = 0;
- }
- if (chg_eof)
- STps->eof = ST_NOEOF;
-
- if ((SRpnt->sense[2] & 0x0f) == BLANK_CHECK)
- STps->eof = ST_EOD;
-
- if (cmd_in == MTLOAD && osst_wait_for_medium(STp, &SRpnt, 60))
- ioctl_result = osst_wait_ready(STp, &SRpnt, 5 * 60, OSST_WAIT_POSITION_COMPLETE);
- }
- *aSRpnt = SRpnt;
-
- return ioctl_result;
-}
-
-
-/* Open the device */
-static int __os_scsi_tape_open(struct inode * inode, struct file * filp)
-{
- unsigned short flags;
- int i, b_size, new_session = 0, retval = 0;
- unsigned char cmd[MAX_COMMAND_SIZE];
- struct osst_request * SRpnt = NULL;
- struct osst_tape * STp;
- struct st_modedef * STm;
- struct st_partstat * STps;
- char * name;
- int dev = TAPE_NR(inode);
- int mode = TAPE_MODE(inode);
-
- /*
- * We really want to do nonseekable_open(inode, filp); here, but some
- * versions of tar incorrectly call lseek on tapes and bail out if that
- * fails. So we disallow pread() and pwrite(), but permit lseeks.
- */
- filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE);
-
- write_lock(&os_scsi_tapes_lock);
- if (dev >= osst_max_dev || os_scsi_tapes == NULL ||
- (STp = os_scsi_tapes[dev]) == NULL || !STp->device) {
- write_unlock(&os_scsi_tapes_lock);
- return (-ENXIO);
- }
-
- name = tape_name(STp);
-
- if (STp->in_use) {
- write_unlock(&os_scsi_tapes_lock);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Device already in use.\n", name);
-#endif
- return (-EBUSY);
- }
- if (scsi_device_get(STp->device)) {
- write_unlock(&os_scsi_tapes_lock);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Failed scsi_device_get.\n", name);
-#endif
- return (-ENXIO);
- }
- filp->private_data = STp;
- STp->in_use = 1;
- write_unlock(&os_scsi_tapes_lock);
- STp->rew_at_close = TAPE_REWIND(inode);
-
- if( !scsi_block_when_processing_errors(STp->device) ) {
- return -ENXIO;
- }
-
- if (mode != STp->current_mode) {
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Mode change from %d to %d.\n",
- name, STp->current_mode, mode);
-#endif
- new_session = 1;
- STp->current_mode = mode;
- }
- STm = &(STp->modes[STp->current_mode]);
-
- flags = filp->f_flags;
- STp->write_prot = ((flags & O_ACCMODE) == O_RDONLY);
-
- STp->raw = TAPE_IS_RAW(inode);
- if (STp->raw)
- STp->header_ok = 0;
-
- /* Allocate data segments for this device's tape buffer */
- if (!enlarge_buffer(STp->buffer, STp->restr_dma)) {
- printk(KERN_ERR "%s:E: Unable to allocate memory segments for tape buffer.\n", name);
- retval = (-EOVERFLOW);
- goto err_out;
- }
- if (STp->buffer->buffer_size >= OS_FRAME_SIZE) {
- for (i = 0, b_size = 0;
- (i < STp->buffer->sg_segs) && ((b_size + STp->buffer->sg[i].length) <= OS_DATA_SIZE);
- b_size += STp->buffer->sg[i++].length);
- STp->buffer->aux = (os_aux_t *) (page_address(sg_page(&STp->buffer->sg[i])) + OS_DATA_SIZE - b_size);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: b_data points to %p in segment 0 at %p\n", name,
- STp->buffer->b_data, page_address(STp->buffer->sg[0].page));
- printk(OSST_DEB_MSG "%s:D: AUX points to %p in segment %d at %p\n", name,
- STp->buffer->aux, i, page_address(STp->buffer->sg[i].page));
-#endif
- } else {
- STp->buffer->aux = NULL; /* this had better never happen! */
- printk(KERN_NOTICE "%s:A: Framesize %d too large for buffer.\n", name, OS_FRAME_SIZE);
- retval = (-EIO);
- goto err_out;
- }
- STp->buffer->writing = 0;
- STp->buffer->syscall_result = 0;
- STp->dirty = 0;
- for (i=0; i < ST_NBR_PARTITIONS; i++) {
- STps = &(STp->ps[i]);
- STps->rw = ST_IDLE;
- }
- STp->ready = ST_READY;
-#if DEBUG
- STp->nbr_waits = STp->nbr_finished = 0;
-#endif
-
- memset (cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(NULL, STp, cmd, 0, DMA_NONE, STp->timeout, MAX_RETRIES, 1);
- if (!SRpnt) {
- retval = (STp->buffer)->syscall_result; /* FIXME - valid? */
- goto err_out;
- }
- if ((SRpnt->sense[0] & 0x70) == 0x70 &&
- (SRpnt->sense[2] & 0x0f) == NOT_READY &&
- SRpnt->sense[12] == 4 ) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Unit not ready, cause %x\n", name, SRpnt->sense[13]);
-#endif
- if (filp->f_flags & O_NONBLOCK) {
- retval = -EAGAIN;
- goto err_out;
- }
- if (SRpnt->sense[13] == 2) { /* initialize command required (LOAD) */
- memset (cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = START_STOP;
- cmd[1] = 1;
- cmd[4] = 1;
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
- STp->timeout, MAX_RETRIES, 1);
- }
- osst_wait_ready(STp, &SRpnt, (SRpnt->sense[13]==1?15:3) * 60, 0);
- }
- if ((SRpnt->sense[0] & 0x70) == 0x70 &&
- (SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { /* New media? */
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Unit wants attention\n", name);
-#endif
- STp->header_ok = 0;
-
- for (i=0; i < 10; i++) {
-
- memset (cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
- STp->timeout, MAX_RETRIES, 1);
- if ((SRpnt->sense[0] & 0x70) != 0x70 ||
- (SRpnt->sense[2] & 0x0f) != UNIT_ATTENTION)
- break;
- }
-
- STp->pos_unknown = 0;
- STp->partition = STp->new_partition = 0;
- if (STp->can_partitions)
- STp->nbr_partitions = 1; /* This guess will be updated later if necessary */
- for (i=0; i < ST_NBR_PARTITIONS; i++) {
- STps = &(STp->ps[i]);
- STps->rw = ST_IDLE; /* FIXME - seems to be redundant... */
- STps->eof = ST_NOEOF;
- STps->at_sm = 0;
- STps->last_block_valid = 0;
- STps->drv_block = 0;
- STps->drv_file = 0 ;
- }
- new_session = 1;
- STp->recover_count = 0;
- STp->abort_count = 0;
- }
- /*
- * if we have valid headers from before, and the drive/tape seem untouched,
- * open without reconfiguring and re-reading the headers
- */
- if (!STp->buffer->syscall_result && STp->header_ok &&
- !SRpnt->result && SRpnt->sense[0] == 0) {
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SENSE;
- cmd[1] = 8;
- cmd[2] = VENDOR_IDENT_PAGE;
- cmd[4] = VENDOR_IDENT_PAGE_LENGTH + MODE_HEADER_LENGTH;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_FROM_DEVICE, STp->timeout, 0, 1);
-
- if (STp->buffer->syscall_result ||
- STp->buffer->b_data[MODE_HEADER_LENGTH + 2] != 'L' ||
- STp->buffer->b_data[MODE_HEADER_LENGTH + 3] != 'I' ||
- STp->buffer->b_data[MODE_HEADER_LENGTH + 4] != 'N' ||
- STp->buffer->b_data[MODE_HEADER_LENGTH + 5] != '4' ) {
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Signature was changed to %c%c%c%c\n", name,
- STp->buffer->b_data[MODE_HEADER_LENGTH + 2],
- STp->buffer->b_data[MODE_HEADER_LENGTH + 3],
- STp->buffer->b_data[MODE_HEADER_LENGTH + 4],
- STp->buffer->b_data[MODE_HEADER_LENGTH + 5]);
-#endif
- STp->header_ok = 0;
- }
- i = STp->first_frame_position;
- if (STp->header_ok && i == osst_get_frame_position(STp, &SRpnt)) {
- if (STp->door_locked == ST_UNLOCKED) {
- if (do_door_lock(STp, 1))
- printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
- else
- STp->door_locked = ST_LOCKED_AUTO;
- }
- if (!STp->frame_in_buffer) {
- STp->block_size = (STm->default_blksize > 0) ?
- STm->default_blksize : OS_DATA_SIZE;
- STp->buffer->buffer_bytes = STp->buffer->read_pointer = 0;
- }
- STp->buffer->buffer_blocks = OS_DATA_SIZE / STp->block_size;
- STp->fast_open = 1;
- osst_release_request(SRpnt);
- return 0;
- }
-#if DEBUG
- if (i != STp->first_frame_position)
- printk(OSST_DEB_MSG "%s:D: Tape position changed from %d to %d\n",
- name, i, STp->first_frame_position);
-#endif
- STp->header_ok = 0;
- }
- STp->fast_open = 0;
-
- if ((STp->buffer)->syscall_result != 0 && /* in all error conditions except no medium */
- (SRpnt->sense[2] != 2 || SRpnt->sense[12] != 0x3A) ) {
-
- memset(cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = MODE_SELECT;
- cmd[1] = 0x10;
- cmd[4] = 4 + MODE_HEADER_LENGTH;
-
- (STp->buffer)->b_data[0] = cmd[4] - 1;
- (STp->buffer)->b_data[1] = 0; /* Medium Type - ignoring */
- (STp->buffer)->b_data[2] = 0; /* Reserved */
- (STp->buffer)->b_data[3] = 0; /* Block Descriptor Length */
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 0] = 0x3f;
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 1] = 1;
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 2] = 2;
- (STp->buffer)->b_data[MODE_HEADER_LENGTH + 3] = 3;
-
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Applying soft reset\n", name);
-#endif
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, cmd[4], DMA_TO_DEVICE, STp->timeout, 0, 1);
-
- STp->header_ok = 0;
-
- for (i=0; i < 10; i++) {
-
- memset (cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- SRpnt = osst_do_scsi(SRpnt, STp, cmd, 0, DMA_NONE,
- STp->timeout, MAX_RETRIES, 1);
- if ((SRpnt->sense[0] & 0x70) != 0x70 ||
- (SRpnt->sense[2] & 0x0f) == NOT_READY)
- break;
-
- if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) {
- int j;
-
- STp->pos_unknown = 0;
- STp->partition = STp->new_partition = 0;
- if (STp->can_partitions)
- STp->nbr_partitions = 1; /* This guess will be updated later if necessary */
- for (j = 0; j < ST_NBR_PARTITIONS; j++) {
- STps = &(STp->ps[j]);
- STps->rw = ST_IDLE;
- STps->eof = ST_NOEOF;
- STps->at_sm = 0;
- STps->last_block_valid = 0;
- STps->drv_block = 0;
- STps->drv_file = 0 ;
- }
- new_session = 1;
- }
- }
- }
-
- if (osst_wait_ready(STp, &SRpnt, 15 * 60, 0)) /* FIXME - not allowed with NOBLOCK */
- printk(KERN_INFO "%s:I: Device did not become Ready in open\n", name);
-
- if ((STp->buffer)->syscall_result != 0) {
- if ((STp->device)->scsi_level >= SCSI_2 &&
- (SRpnt->sense[0] & 0x70) == 0x70 &&
- (SRpnt->sense[2] & 0x0f) == NOT_READY &&
- SRpnt->sense[12] == 0x3a) { /* Check ASC */
- STp->ready = ST_NO_TAPE;
- } else
- STp->ready = ST_NOT_READY;
- osst_release_request(SRpnt);
- SRpnt = NULL;
- STp->density = 0; /* Clear the erroneous "residue" */
- STp->write_prot = 0;
- STp->block_size = 0;
- STp->ps[0].drv_file = STp->ps[0].drv_block = (-1);
- STp->partition = STp->new_partition = 0;
- STp->door_locked = ST_UNLOCKED;
- return 0;
- }
-
- osst_configure_onstream(STp, &SRpnt);
-
- STp->block_size = STp->raw ? OS_FRAME_SIZE : (
- (STm->default_blksize > 0) ? STm->default_blksize : OS_DATA_SIZE);
- STp->buffer->buffer_blocks = STp->raw ? 1 : OS_DATA_SIZE / STp->block_size;
- STp->buffer->buffer_bytes =
- STp->buffer->read_pointer =
- STp->frame_in_buffer = 0;
-
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Block size: %d, frame size: %d, buffer size: %d (%d blocks).\n",
- name, STp->block_size, OS_FRAME_SIZE, (STp->buffer)->buffer_size,
- (STp->buffer)->buffer_blocks);
-#endif
-
- if (STp->drv_write_prot) {
- STp->write_prot = 1;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Write protected\n", name);
-#endif
- if ((flags & O_ACCMODE) == O_WRONLY || (flags & O_ACCMODE) == O_RDWR) {
- retval = (-EROFS);
- goto err_out;
- }
- }
-
- if (new_session) { /* Change the drive parameters for the new mode */
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: New Session\n", name);
-#endif
- STp->density_changed = STp->blksize_changed = 0;
- STp->compression_changed = 0;
- }
-
- /*
- * properly position the tape and check the ADR headers
- */
- if (STp->door_locked == ST_UNLOCKED) {
- if (do_door_lock(STp, 1))
- printk(KERN_INFO "%s:I: Can't lock drive door\n", name);
- else
- STp->door_locked = ST_LOCKED_AUTO;
- }
-
- osst_analyze_headers(STp, &SRpnt);
-
- osst_release_request(SRpnt);
- SRpnt = NULL;
-
- return 0;
-
-err_out:
- if (SRpnt != NULL)
- osst_release_request(SRpnt);
- normalize_buffer(STp->buffer);
- STp->header_ok = 0;
- STp->in_use = 0;
- scsi_device_put(STp->device);
-
- return retval;
-}
-
-/* BKL pushdown: spaghetti avoidance wrapper */
-static int os_scsi_tape_open(struct inode * inode, struct file * filp)
-{
- int ret;
-
- mutex_lock(&osst_int_mutex);
- ret = __os_scsi_tape_open(inode, filp);
- mutex_unlock(&osst_int_mutex);
- return ret;
-}
-
-
-
-/* Flush the tape buffer before close */
-static int os_scsi_tape_flush(struct file * filp, fl_owner_t id)
-{
- int result = 0, result2;
- struct osst_tape * STp = filp->private_data;
- struct st_modedef * STm = &(STp->modes[STp->current_mode]);
- struct st_partstat * STps = &(STp->ps[STp->partition]);
- struct osst_request * SRpnt = NULL;
- char * name = tape_name(STp);
-
- if (file_count(filp) > 1)
- return 0;
-
- if ((STps->rw == ST_WRITING || STp->dirty) && !STp->pos_unknown) {
- STp->write_type = OS_WRITE_DATA;
- result = osst_flush_write_buffer(STp, &SRpnt);
- if (result != 0 && result != (-ENOSPC))
- goto out;
- }
- if ( STps->rw >= ST_WRITING && !STp->pos_unknown) {
-
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG "%s:D: File length %ld bytes.\n",
- name, (long)(filp->f_pos));
- printk(OSST_DEB_MSG "%s:D: Async write waits %d, finished %d.\n",
- name, STp->nbr_waits, STp->nbr_finished);
- }
-#endif
- result = osst_write_trailer(STp, &SRpnt, !(STp->rew_at_close));
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG "%s:D: Buffer flushed, %d EOF(s) written\n",
- name, 1+STp->two_fm);
-#endif
- }
- else if (!STp->rew_at_close) {
- STps = &(STp->ps[STp->partition]);
- if (!STm->sysv || STps->rw != ST_READING) {
- if (STp->can_bsr)
- result = osst_flush_buffer(STp, &SRpnt, 0); /* this is the default path */
- else if (STps->eof == ST_FM_HIT) {
- result = cross_eof(STp, &SRpnt, 0);
- if (result) {
- if (STps->drv_file >= 0)
- STps->drv_file++;
- STps->drv_block = 0;
- STps->eof = ST_FM;
- }
- else
- STps->eof = ST_NOEOF;
- }
- }
- else if ((STps->eof == ST_NOEOF &&
- !(result = cross_eof(STp, &SRpnt, 1))) ||
- STps->eof == ST_FM_HIT) {
- if (STps->drv_file >= 0)
- STps->drv_file++;
- STps->drv_block = 0;
- STps->eof = ST_FM;
- }
- }
-
-out:
- if (STp->rew_at_close) {
- result2 = osst_position_tape_and_confirm(STp, &SRpnt, STp->first_data_ppos);
- STps->drv_file = STps->drv_block = STp->frame_seq_number = STp->logical_blk_num = 0;
- if (result == 0 && result2 < 0)
- result = result2;
- }
- if (SRpnt) osst_release_request(SRpnt);
-
- if (STp->abort_count || STp->recover_count) {
- printk(KERN_INFO "%s:I:", name);
- if (STp->abort_count)
- printk(" %d unrecovered errors", STp->abort_count);
- if (STp->recover_count)
- printk(" %d recovered errors", STp->recover_count);
- if (STp->write_count)
- printk(" in %d frames written", STp->write_count);
- if (STp->read_count)
- printk(" in %d frames read", STp->read_count);
- printk("\n");
- STp->recover_count = 0;
- STp->abort_count = 0;
- }
- STp->write_count = 0;
- STp->read_count = 0;
-
- return result;
-}
-
-
-/* Close the device and release it */
-static int os_scsi_tape_close(struct inode * inode, struct file * filp)
-{
- int result = 0;
- struct osst_tape * STp = filp->private_data;
-
- if (STp->door_locked == ST_LOCKED_AUTO)
- do_door_lock(STp, 0);
-
- if (STp->raw)
- STp->header_ok = 0;
-
- normalize_buffer(STp->buffer);
- write_lock(&os_scsi_tapes_lock);
- STp->in_use = 0;
- write_unlock(&os_scsi_tapes_lock);
-
- scsi_device_put(STp->device);
-
- return result;
-}
-
-
-/* The ioctl command */
-static long osst_ioctl(struct file * file,
- unsigned int cmd_in, unsigned long arg)
-{
- int i, cmd_nr, cmd_type, blk, retval = 0;
- struct st_modedef * STm;
- struct st_partstat * STps;
- struct osst_request * SRpnt = NULL;
- struct osst_tape * STp = file->private_data;
- char * name = tape_name(STp);
- void __user * p = (void __user *)arg;
-
- mutex_lock(&osst_int_mutex);
- if (mutex_lock_interruptible(&STp->lock)) {
- mutex_unlock(&osst_int_mutex);
- return -ERESTARTSYS;
- }
-
-#if DEBUG
- if (debugging && !STp->in_use) {
- printk(OSST_DEB_MSG "%s:D: Incorrect device.\n", name);
- retval = (-EIO);
- goto out;
- }
-#endif
- STm = &(STp->modes[STp->current_mode]);
- STps = &(STp->ps[STp->partition]);
-
- /*
- * If we are in the middle of error recovery, don't let anyone
- * else try and use this device. Also, if error recovery fails, it
- * may try and take the device offline, in which case all further
- * access to the device is prohibited.
- */
- retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
- file->f_flags & O_NDELAY);
- if (retval)
- goto out;
-
- cmd_type = _IOC_TYPE(cmd_in);
- cmd_nr = _IOC_NR(cmd_in);
-#if DEBUG
- printk(OSST_DEB_MSG "%s:D: Ioctl %d,%d in %s mode\n", name,
- cmd_type, cmd_nr, STp->raw?"raw":"normal");
-#endif
- if (cmd_type == _IOC_TYPE(MTIOCTOP) && cmd_nr == _IOC_NR(MTIOCTOP)) {
- struct mtop mtc;
- int auto_weof = 0;
-
- if (_IOC_SIZE(cmd_in) != sizeof(mtc)) {
- retval = (-EINVAL);
- goto out;
- }
-
- i = copy_from_user((char *) &mtc, p, sizeof(struct mtop));
- if (i) {
- retval = (-EFAULT);
- goto out;
- }
-
- if (mtc.mt_op == MTSETDRVBUFFER && !capable(CAP_SYS_ADMIN)) {
- printk(KERN_WARNING "%s:W: MTSETDRVBUFFER only allowed for root.\n", name);
- retval = (-EPERM);
- goto out;
- }
-
- if (!STm->defined && (mtc.mt_op != MTSETDRVBUFFER && (mtc.mt_count & MT_ST_OPTIONS) == 0)) {
- retval = (-ENXIO);
- goto out;
- }
-
- if (!STp->pos_unknown) {
-
- if (STps->eof == ST_FM_HIT) {
- if (mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM|| mtc.mt_op == MTEOM) {
- mtc.mt_count -= 1;
- if (STps->drv_file >= 0)
- STps->drv_file += 1;
- }
- else if (mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM) {
- mtc.mt_count += 1;
- if (STps->drv_file >= 0)
- STps->drv_file += 1;
- }
- }
-
- if (mtc.mt_op == MTSEEK) {
- /* Old position must be restored if partition will be changed */
- i = !STp->can_partitions || (STp->new_partition != STp->partition);
- }
- else {
- i = mtc.mt_op == MTREW || mtc.mt_op == MTOFFL ||
- mtc.mt_op == MTRETEN || mtc.mt_op == MTEOM ||
- mtc.mt_op == MTLOCK || mtc.mt_op == MTLOAD ||
- mtc.mt_op == MTFSF || mtc.mt_op == MTFSFM ||
- mtc.mt_op == MTBSF || mtc.mt_op == MTBSFM ||
- mtc.mt_op == MTCOMPRESSION;
- }
- i = osst_flush_buffer(STp, &SRpnt, i);
- if (i < 0) {
- retval = i;
- goto out;
- }
- }
- else {
- /*
- * If there was a bus reset, block further access
- * to this device. If the user wants to rewind the tape,
- * then reset the flag and allow access again.
- */
- if(mtc.mt_op != MTREW &&
- mtc.mt_op != MTOFFL &&
- mtc.mt_op != MTRETEN &&
- mtc.mt_op != MTERASE &&
- mtc.mt_op != MTSEEK &&
- mtc.mt_op != MTEOM) {
- retval = (-EIO);
- goto out;
- }
- reset_state(STp);
- /* remove this when the midlevel properly clears was_reset */
- STp->device->was_reset = 0;
- }
-
- if (mtc.mt_op != MTCOMPRESSION && mtc.mt_op != MTLOCK &&
- mtc.mt_op != MTNOP && mtc.mt_op != MTSETBLK &&
- mtc.mt_op != MTSETDENSITY && mtc.mt_op != MTSETDRVBUFFER &&
- mtc.mt_op != MTMKPART && mtc.mt_op != MTSETPART &&
- mtc.mt_op != MTWEOF && mtc.mt_op != MTWSM ) {
-
- /*
- * The user tells us to move to another position on the tape.
- * If we were appending to the tape content, that would leave
- * the tape without proper end, in that case write EOD and
- * update the header to reflect its position.
- */
-#if DEBUG
- printk(KERN_WARNING "%s:D: auto_weod %s at ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n", name,
- STps->rw >= ST_WRITING ? "write" : STps->rw == ST_READING ? "read" : "idle",
- STp->first_frame_position, STp->eod_frame_ppos, STp->frame_seq_number,
- STp->logical_blk_num, STps->drv_file, STps->drv_block );
-#endif
- if (STps->rw >= ST_WRITING && STp->first_frame_position >= STp->eod_frame_ppos) {
- auto_weof = ((STp->write_type != OS_WRITE_NEW_MARK) &&
- !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
- i = osst_write_trailer(STp, &SRpnt,
- !(mtc.mt_op == MTREW || mtc.mt_op == MTOFFL));
-#if DEBUG
- printk(KERN_WARNING "%s:D: post trailer xeof=%d,ffp=%d,efp=%d,fsn=%d,lbn=%d,fn=%d,bn=%d\n",
- name, auto_weof, STp->first_frame_position, STp->eod_frame_ppos,
- STp->frame_seq_number, STp->logical_blk_num, STps->drv_file, STps->drv_block );
-#endif
- if (i < 0) {
- retval = i;
- goto out;
- }
- }
- STps->rw = ST_IDLE;
- }
-
- if (mtc.mt_op == MTOFFL && STp->door_locked != ST_UNLOCKED)
- do_door_lock(STp, 0); /* Ignore result! */
-
- if (mtc.mt_op == MTSETDRVBUFFER &&
- (mtc.mt_count & MT_ST_OPTIONS) != 0) {
- retval = osst_set_options(STp, mtc.mt_count);
- goto out;
- }
-
- if (mtc.mt_op == MTSETPART) {
- if (mtc.mt_count >= STp->nbr_partitions)
- retval = -EINVAL;
- else {
- STp->new_partition = mtc.mt_count;
- retval = 0;
- }
- goto out;
- }
-
- if (mtc.mt_op == MTMKPART) {
- if (!STp->can_partitions) {
- retval = (-EINVAL);
- goto out;
- }
- if ((i = osst_int_ioctl(STp, &SRpnt, MTREW, 0)) < 0 /*||
- (i = partition_tape(inode, mtc.mt_count)) < 0*/) {
- retval = i;
- goto out;
- }
- for (i=0; i < ST_NBR_PARTITIONS; i++) {
- STp->ps[i].rw = ST_IDLE;
- STp->ps[i].at_sm = 0;
- STp->ps[i].last_block_valid = 0;
- }
- STp->partition = STp->new_partition = 0;
- STp->nbr_partitions = 1; /* Bad guess ?-) */
- STps->drv_block = STps->drv_file = 0;
- retval = 0;
- goto out;
- }
-
- if (mtc.mt_op == MTSEEK) {
- if (STp->raw)
- i = osst_set_frame_position(STp, &SRpnt, mtc.mt_count, 0);
- else
- i = osst_seek_sector(STp, &SRpnt, mtc.mt_count);
- if (!STp->can_partitions)
- STp->ps[0].rw = ST_IDLE;
- retval = i;
- goto out;
- }
-
- if (mtc.mt_op == MTLOCK || mtc.mt_op == MTUNLOCK) {
- retval = do_door_lock(STp, (mtc.mt_op == MTLOCK));
- goto out;
- }
-
- if (auto_weof)
- cross_eof(STp, &SRpnt, 0);
-
- if (mtc.mt_op == MTCOMPRESSION)
- retval = -EINVAL; /* OnStream drives don't have compression hardware */
- else
- /* MTBSF MTBSFM MTBSR MTBSS MTEOM MTERASE MTFSF MTFSFB MTFSR MTFSS
- * MTLOAD MTOFFL MTRESET MTRETEN MTREW MTUNLOAD MTWEOF MTWSM */
- retval = osst_int_ioctl(STp, &SRpnt, mtc.mt_op, mtc.mt_count);
- goto out;
- }
-
- if (!STm->defined) {
- retval = (-ENXIO);
- goto out;
- }
-
- if ((i = osst_flush_buffer(STp, &SRpnt, 0)) < 0) {
- retval = i;
- goto out;
- }
-
- if (cmd_type == _IOC_TYPE(MTIOCGET) && cmd_nr == _IOC_NR(MTIOCGET)) {
- struct mtget mt_status;
-
- if (_IOC_SIZE(cmd_in) != sizeof(struct mtget)) {
- retval = (-EINVAL);
- goto out;
- }
-
- mt_status.mt_type = MT_ISONSTREAM_SC;
- mt_status.mt_erreg = STp->recover_erreg << MT_ST_SOFTERR_SHIFT;
- mt_status.mt_dsreg =
- ((STp->block_size << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK) |
- ((STp->density << MT_ST_DENSITY_SHIFT) & MT_ST_DENSITY_MASK);
- mt_status.mt_blkno = STps->drv_block;
- mt_status.mt_fileno = STps->drv_file;
- if (STp->block_size != 0) {
- if (STps->rw == ST_WRITING)
- mt_status.mt_blkno += (STp->buffer)->buffer_bytes / STp->block_size;
- else if (STps->rw == ST_READING)
- mt_status.mt_blkno -= ((STp->buffer)->buffer_bytes +
- STp->block_size - 1) / STp->block_size;
- }
-
- mt_status.mt_gstat = 0;
- if (STp->drv_write_prot)
- mt_status.mt_gstat |= GMT_WR_PROT(0xffffffff);
- if (mt_status.mt_blkno == 0) {
- if (mt_status.mt_fileno == 0)
- mt_status.mt_gstat |= GMT_BOT(0xffffffff);
- else
- mt_status.mt_gstat |= GMT_EOF(0xffffffff);
- }
- mt_status.mt_resid = STp->partition;
- if (STps->eof == ST_EOM_OK || STps->eof == ST_EOM_ERROR)
- mt_status.mt_gstat |= GMT_EOT(0xffffffff);
- else if (STps->eof >= ST_EOM_OK)
- mt_status.mt_gstat |= GMT_EOD(0xffffffff);
- if (STp->density == 1)
- mt_status.mt_gstat |= GMT_D_800(0xffffffff);
- else if (STp->density == 2)
- mt_status.mt_gstat |= GMT_D_1600(0xffffffff);
- else if (STp->density == 3)
- mt_status.mt_gstat |= GMT_D_6250(0xffffffff);
- if (STp->ready == ST_READY)
- mt_status.mt_gstat |= GMT_ONLINE(0xffffffff);
- if (STp->ready == ST_NO_TAPE)
- mt_status.mt_gstat |= GMT_DR_OPEN(0xffffffff);
- if (STps->at_sm)
- mt_status.mt_gstat |= GMT_SM(0xffffffff);
- if (STm->do_async_writes || (STm->do_buffer_writes && STp->block_size != 0) ||
- STp->drv_buffer != 0)
- mt_status.mt_gstat |= GMT_IM_REP_EN(0xffffffff);
-
- i = copy_to_user(p, &mt_status, sizeof(struct mtget));
- if (i) {
- retval = (-EFAULT);
- goto out;
- }
-
- STp->recover_erreg = 0; /* Clear after read */
- retval = 0;
- goto out;
- } /* End of MTIOCGET */
-
- if (cmd_type == _IOC_TYPE(MTIOCPOS) && cmd_nr == _IOC_NR(MTIOCPOS)) {
- struct mtpos mt_pos;
-
- if (_IOC_SIZE(cmd_in) != sizeof(struct mtpos)) {
- retval = (-EINVAL);
- goto out;
- }
- if (STp->raw)
- blk = osst_get_frame_position(STp, &SRpnt);
- else
- blk = osst_get_sector(STp, &SRpnt);
- if (blk < 0) {
- retval = blk;
- goto out;
- }
- mt_pos.mt_blkno = blk;
- i = copy_to_user(p, &mt_pos, sizeof(struct mtpos));
- if (i)
- retval = -EFAULT;
- goto out;
- }
- if (SRpnt) osst_release_request(SRpnt);
-
- mutex_unlock(&STp->lock);
-
- retval = scsi_ioctl(STp->device, cmd_in, p);
- mutex_unlock(&osst_int_mutex);
- return retval;
-
-out:
- if (SRpnt) osst_release_request(SRpnt);
-
- mutex_unlock(&STp->lock);
- mutex_unlock(&osst_int_mutex);
-
- return retval;
-}
-
-#ifdef CONFIG_COMPAT
-static long osst_compat_ioctl(struct file * file, unsigned int cmd_in, unsigned long arg)
-{
- struct osst_tape *STp = file->private_data;
- struct scsi_device *sdev = STp->device;
- int ret = -ENOIOCTLCMD;
- if (sdev->host->hostt->compat_ioctl) {
-
- ret = sdev->host->hostt->compat_ioctl(sdev, cmd_in, (void __user *)arg);
-
- }
- return ret;
-}
-#endif
-
-
-
-/* Memory handling routines */
-
-/* Try to allocate a new tape buffer skeleton. Caller must not hold os_scsi_tapes_lock */
-static struct osst_buffer * new_tape_buffer( int from_initialization, int need_dma, int max_sg )
-{
- int i;
- gfp_t priority;
- struct osst_buffer *tb;
-
- if (from_initialization)
- priority = GFP_ATOMIC;
- else
- priority = GFP_KERNEL;
-
- i = sizeof(struct osst_buffer) + (osst_max_sg_segs - 1) * sizeof(struct scatterlist);
- tb = kzalloc(i, priority);
- if (!tb) {
- printk(KERN_NOTICE "osst :I: Can't allocate new tape buffer.\n");
- return NULL;
- }
-
- tb->sg_segs = tb->orig_sg_segs = 0;
- tb->use_sg = max_sg;
- tb->in_use = 1;
- tb->dma = need_dma;
- tb->buffer_size = 0;
-#if DEBUG
- if (debugging)
- printk(OSST_DEB_MSG
- "osst :D: Allocated tape buffer skeleton (%d bytes, %d segments, dma: %d).\n",
- i, max_sg, need_dma);
-#endif
- return tb;
-}
-
-/* Try to allocate a temporary (while a user has the device open) enlarged tape buffer */
-static int enlarge_buffer(struct osst_buffer *STbuffer, int need_dma)
-{
- int segs, nbr, max_segs, b_size, order, got;
- gfp_t priority;
-
- if (STbuffer->buffer_size >= OS_FRAME_SIZE)
- return 1;
-
- if (STbuffer->sg_segs) {
- printk(KERN_WARNING "osst :A: Buffer not previously normalized.\n");
- normalize_buffer(STbuffer);
- }
- /* See how many segments we can use -- need at least two */
- nbr = max_segs = STbuffer->use_sg;
- if (nbr <= 2)
- return 0;
-
- priority = GFP_KERNEL /* | __GFP_NOWARN */;
- if (need_dma)
- priority |= GFP_DMA;
-
- /* Try to allocate the first segment up to OS_DATA_SIZE and the others
- big enough to reach the goal (code assumes no segments in place) */
- for (b_size = OS_DATA_SIZE, order = OSST_FIRST_ORDER; b_size >= PAGE_SIZE; order--, b_size /= 2) {
- struct page *page = alloc_pages(priority, order);
-
- STbuffer->sg[0].offset = 0;
- if (page != NULL) {
- sg_set_page(&STbuffer->sg[0], page, b_size, 0);
- STbuffer->b_data = page_address(page);
- break;
- }
- }
- if (sg_page(&STbuffer->sg[0]) == NULL) {
- printk(KERN_NOTICE "osst :I: Can't allocate tape buffer main segment.\n");
- return 0;
- }
- /* Got initial segment of 'bsize,order', continue with same size if possible, except for AUX */
- for (segs=STbuffer->sg_segs=1, got=b_size;
- segs < max_segs && got < OS_FRAME_SIZE; ) {
- struct page *page = alloc_pages(priority, (OS_FRAME_SIZE - got <= PAGE_SIZE) ? 0 : order);
- STbuffer->sg[segs].offset = 0;
- if (page == NULL) {
- printk(KERN_WARNING "osst :W: Failed to enlarge buffer to %d bytes.\n",
- OS_FRAME_SIZE);
-#if DEBUG
- STbuffer->buffer_size = got;
-#endif
- normalize_buffer(STbuffer);
- return 0;
- }
- sg_set_page(&STbuffer->sg[segs], page, (OS_FRAME_SIZE - got <= PAGE_SIZE / 2) ? (OS_FRAME_SIZE - got) : b_size, 0);
- got += STbuffer->sg[segs].length;
- STbuffer->buffer_size = got;
- STbuffer->sg_segs = ++segs;
- }
-#if DEBUG
- if (debugging) {
- printk(OSST_DEB_MSG
- "osst :D: Expanded tape buffer (%d bytes, %d->%d segments, dma: %d, at: %p).\n",
- got, STbuffer->orig_sg_segs, STbuffer->sg_segs, need_dma, STbuffer->b_data);
- printk(OSST_DEB_MSG
- "osst :D: segment sizes: first %d at %p, last %d bytes at %p.\n",
- STbuffer->sg[0].length, page_address(STbuffer->sg[0].page),
- STbuffer->sg[segs-1].length, page_address(STbuffer->sg[segs-1].page));
- }
-#endif
-
- return 1;
-}
-
-
-/* Release the segments */
-static void normalize_buffer(struct osst_buffer *STbuffer)
-{
- int i, order, b_size;
-
- for (i=0; i < STbuffer->sg_segs; i++) {
-
- for (b_size = PAGE_SIZE, order = 0;
- b_size < STbuffer->sg[i].length;
- b_size *= 2, order++);
-
- __free_pages(sg_page(&STbuffer->sg[i]), order);
- STbuffer->buffer_size -= STbuffer->sg[i].length;
- }
-#if DEBUG
- if (debugging && STbuffer->orig_sg_segs < STbuffer->sg_segs)
- printk(OSST_DEB_MSG "osst :D: Buffer at %p normalized to %d bytes (segs %d).\n",
- STbuffer->b_data, STbuffer->buffer_size, STbuffer->sg_segs);
-#endif
- STbuffer->sg_segs = STbuffer->orig_sg_segs = 0;
-}
-
-
-/* Move data from the user buffer to the tape buffer. Returns zero (success) or
- negative error code. */
-static int append_to_buffer(const char __user *ubp, struct osst_buffer *st_bp, int do_count)
-{
- int i, cnt, res, offset;
-
- for (i=0, offset=st_bp->buffer_bytes;
- i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
- offset -= st_bp->sg[i].length;
- if (i == st_bp->sg_segs) { /* Should never happen */
- printk(KERN_WARNING "osst :A: Append_to_buffer offset overflow.\n");
- return (-EIO);
- }
- for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
- cnt = st_bp->sg[i].length - offset < do_count ?
- st_bp->sg[i].length - offset : do_count;
- res = copy_from_user(page_address(sg_page(&st_bp->sg[i])) + offset, ubp, cnt);
- if (res)
- return (-EFAULT);
- do_count -= cnt;
- st_bp->buffer_bytes += cnt;
- ubp += cnt;
- offset = 0;
- }
- if (do_count) { /* Should never happen */
- printk(KERN_WARNING "osst :A: Append_to_buffer overflow (left %d).\n",
- do_count);
- return (-EIO);
- }
- return 0;
-}
-
-
-/* Move data from the tape buffer to the user buffer. Returns zero (success) or
- negative error code. */
-static int from_buffer(struct osst_buffer *st_bp, char __user *ubp, int do_count)
-{
- int i, cnt, res, offset;
-
- for (i=0, offset=st_bp->read_pointer;
- i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
- offset -= st_bp->sg[i].length;
- if (i == st_bp->sg_segs) { /* Should never happen */
- printk(KERN_WARNING "osst :A: From_buffer offset overflow.\n");
- return (-EIO);
- }
- for ( ; i < st_bp->sg_segs && do_count > 0; i++) {
- cnt = st_bp->sg[i].length - offset < do_count ?
- st_bp->sg[i].length - offset : do_count;
- res = copy_to_user(ubp, page_address(sg_page(&st_bp->sg[i])) + offset, cnt);
- if (res)
- return (-EFAULT);
- do_count -= cnt;
- st_bp->buffer_bytes -= cnt;
- st_bp->read_pointer += cnt;
- ubp += cnt;
- offset = 0;
- }
- if (do_count) { /* Should never happen */
- printk(KERN_WARNING "osst :A: From_buffer overflow (left %d).\n", do_count);
- return (-EIO);
- }
- return 0;
-}
-
-/* Sets the tail of the buffer after fill point to zero.
- Returns zero (success) or negative error code. */
-static int osst_zero_buffer_tail(struct osst_buffer *st_bp)
-{
- int i, offset, do_count, cnt;
-
- for (i = 0, offset = st_bp->buffer_bytes;
- i < st_bp->sg_segs && offset >= st_bp->sg[i].length; i++)
- offset -= st_bp->sg[i].length;
- if (i == st_bp->sg_segs) { /* Should never happen */
- printk(KERN_WARNING "osst :A: Zero_buffer offset overflow.\n");
- return (-EIO);
- }
- for (do_count = OS_DATA_SIZE - st_bp->buffer_bytes;
- i < st_bp->sg_segs && do_count > 0; i++) {
- cnt = st_bp->sg[i].length - offset < do_count ?
- st_bp->sg[i].length - offset : do_count ;
- memset(page_address(sg_page(&st_bp->sg[i])) + offset, 0, cnt);
- do_count -= cnt;
- offset = 0;
- }
- if (do_count) { /* Should never happen */
- printk(KERN_WARNING "osst :A: Zero_buffer overflow (left %d).\n", do_count);
- return (-EIO);
- }
- return 0;
-}
-
-/* Copy a osst 32K chunk of memory into the buffer.
- Returns zero (success) or negative error code. */
-static int osst_copy_to_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
-{
- int i, cnt, do_count = OS_DATA_SIZE;
-
- for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
- cnt = st_bp->sg[i].length < do_count ?
- st_bp->sg[i].length : do_count ;
- memcpy(page_address(sg_page(&st_bp->sg[i])), ptr, cnt);
- do_count -= cnt;
- ptr += cnt;
- }
- if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */
- printk(KERN_WARNING "osst :A: Copy_to_buffer overflow (left %d at sg %d).\n",
- do_count, i);
- return (-EIO);
- }
- return 0;
-}
-
-/* Copy a osst 32K chunk of memory from the buffer.
- Returns zero (success) or negative error code. */
-static int osst_copy_from_buffer(struct osst_buffer *st_bp, unsigned char *ptr)
-{
- int i, cnt, do_count = OS_DATA_SIZE;
-
- for (i = 0; i < st_bp->sg_segs && do_count > 0; i++) {
- cnt = st_bp->sg[i].length < do_count ?
- st_bp->sg[i].length : do_count ;
- memcpy(ptr, page_address(sg_page(&st_bp->sg[i])), cnt);
- do_count -= cnt;
- ptr += cnt;
- }
- if (do_count || i != st_bp->sg_segs-1) { /* Should never happen */
- printk(KERN_WARNING "osst :A: Copy_from_buffer overflow (left %d at sg %d).\n",
- do_count, i);
- return (-EIO);
- }
- return 0;
-}
-
-
-/* Module housekeeping */
-
-static void validate_options (void)
-{
- if (max_dev > 0)
- osst_max_dev = max_dev;
- if (write_threshold_kbs > 0)
- osst_write_threshold = write_threshold_kbs * ST_KILOBYTE;
- if (osst_write_threshold > osst_buffer_size)
- osst_write_threshold = osst_buffer_size;
- if (max_sg_segs >= OSST_FIRST_SG)
- osst_max_sg_segs = max_sg_segs;
-#if DEBUG
- printk(OSST_DEB_MSG "osst :D: max tapes %d, write threshold %d, max s/g segs %d.\n",
- osst_max_dev, osst_write_threshold, osst_max_sg_segs);
-#endif
-}
-
-#ifndef MODULE
-/* Set the boot options. Syntax: osst=xxx,yyy,...
- where xxx is write threshold in 1024 byte blocks,
- and yyy is number of s/g segments to use. */
-static int __init osst_setup (char *str)
-{
- int i, ints[5];
- char *stp;
-
- stp = get_options(str, ARRAY_SIZE(ints), ints);
-
- if (ints[0] > 0) {
- for (i = 0; i < ints[0] && i < ARRAY_SIZE(parms); i++)
- *parms[i].val = ints[i + 1];
- } else {
- while (stp != NULL) {
- for (i = 0; i < ARRAY_SIZE(parms); i++) {
- int len = strlen(parms[i].name);
- if (!strncmp(stp, parms[i].name, len) &&
- (*(stp + len) == ':' || *(stp + len) == '=')) {
- *parms[i].val =
- simple_strtoul(stp + len + 1, NULL, 0);
- break;
- }
- }
- if (i >= ARRAY_SIZE(parms))
- printk(KERN_INFO "osst :I: Illegal parameter in '%s'\n",
- stp);
- stp = strchr(stp, ',');
- if (stp)
- stp++;
- }
- }
-
- return 1;
-}
-
-__setup("osst=", osst_setup);
-
-#endif
-
-static const struct file_operations osst_fops = {
- .owner = THIS_MODULE,
- .read = osst_read,
- .write = osst_write,
- .unlocked_ioctl = osst_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = osst_compat_ioctl,
-#endif
- .open = os_scsi_tape_open,
- .flush = os_scsi_tape_flush,
- .release = os_scsi_tape_close,
- .llseek = noop_llseek,
-};
-
-static int osst_supports(struct scsi_device * SDp)
-{
- struct osst_support_data {
- char *vendor;
- char *model;
- char *rev;
- char *driver_hint; /* Name of the correct driver, NULL if unknown */
- };
-
-static struct osst_support_data support_list[] = {
- /* {"XXX", "Yy-", "", NULL}, example */
- SIGS_FROM_OSST,
- {NULL, }};
-
- struct osst_support_data *rp;
-
- /* We are willing to drive OnStream SC-x0 as well as the
- * * IDE, ParPort, FireWire, USB variants, if accessible by
- * * emulation layer (ide-scsi, usb-storage, ...) */
-
- for (rp=&(support_list[0]); rp->vendor != NULL; rp++)
- if (!strncmp(rp->vendor, SDp->vendor, strlen(rp->vendor)) &&
- !strncmp(rp->model, SDp->model, strlen(rp->model)) &&
- !strncmp(rp->rev, SDp->rev, strlen(rp->rev)))
- return 1;
- return 0;
-}
-
-/*
- * sysfs support for osst driver parameter information
- */
-
-static ssize_t version_show(struct device_driver *ddd, char *buf)
-{
- return snprintf(buf, PAGE_SIZE, "%s\n", osst_version);
-}
-
-static DRIVER_ATTR_RO(version);
-
-static int osst_create_sysfs_files(struct device_driver *sysfs)
-{
- return driver_create_file(sysfs, &driver_attr_version);
-}
-
-static void osst_remove_sysfs_files(struct device_driver *sysfs)
-{
- driver_remove_file(sysfs, &driver_attr_version);
-}
-
-/*
- * sysfs support for accessing ADR header information
- */
-
-static ssize_t osst_adr_rev_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
- ssize_t l = 0;
-
- if (STp && STp->header_ok && STp->linux_media)
- l = snprintf(buf, PAGE_SIZE, "%d.%d\n", STp->header_cache->major_rev, STp->header_cache->minor_rev);
- return l;
-}
-
-DEVICE_ATTR(ADR_rev, S_IRUGO, osst_adr_rev_show, NULL);
-
-static ssize_t osst_linux_media_version_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
- ssize_t l = 0;
-
- if (STp && STp->header_ok && STp->linux_media)
- l = snprintf(buf, PAGE_SIZE, "LIN%d\n", STp->linux_media_version);
- return l;
-}
-
-DEVICE_ATTR(media_version, S_IRUGO, osst_linux_media_version_show, NULL);
-
-static ssize_t osst_capacity_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
- ssize_t l = 0;
-
- if (STp && STp->header_ok && STp->linux_media)
- l = snprintf(buf, PAGE_SIZE, "%d\n", STp->capacity);
- return l;
-}
-
-DEVICE_ATTR(capacity, S_IRUGO, osst_capacity_show, NULL);
-
-static ssize_t osst_first_data_ppos_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
- ssize_t l = 0;
-
- if (STp && STp->header_ok && STp->linux_media)
- l = snprintf(buf, PAGE_SIZE, "%d\n", STp->first_data_ppos);
- return l;
-}
-
-DEVICE_ATTR(BOT_frame, S_IRUGO, osst_first_data_ppos_show, NULL);
-
-static ssize_t osst_eod_frame_ppos_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
- ssize_t l = 0;
-
- if (STp && STp->header_ok && STp->linux_media)
- l = snprintf(buf, PAGE_SIZE, "%d\n", STp->eod_frame_ppos);
- return l;
-}
-
-DEVICE_ATTR(EOD_frame, S_IRUGO, osst_eod_frame_ppos_show, NULL);
-
-static ssize_t osst_filemark_cnt_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct osst_tape * STp = (struct osst_tape *) dev_get_drvdata (dev);
- ssize_t l = 0;
-
- if (STp && STp->header_ok && STp->linux_media)
- l = snprintf(buf, PAGE_SIZE, "%d\n", STp->filemark_cnt);
- return l;
-}
-
-DEVICE_ATTR(file_count, S_IRUGO, osst_filemark_cnt_show, NULL);
-
-static struct class *osst_sysfs_class;
-
-static int osst_sysfs_init(void)
-{
- osst_sysfs_class = class_create(THIS_MODULE, "onstream_tape");
- if (IS_ERR(osst_sysfs_class)) {
- printk(KERN_ERR "osst :W: Unable to register sysfs class\n");
- return PTR_ERR(osst_sysfs_class);
- }
-
- return 0;
-}
-
-static void osst_sysfs_destroy(dev_t dev)
-{
- device_destroy(osst_sysfs_class, dev);
-}
-
-static int osst_sysfs_add(dev_t dev, struct device *device, struct osst_tape * STp, char * name)
-{
- struct device *osst_member;
- int err;
-
- osst_member = device_create(osst_sysfs_class, device, dev, STp,
- "%s", name);
- if (IS_ERR(osst_member)) {
- printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
- return PTR_ERR(osst_member);
- }
-
- err = device_create_file(osst_member, &dev_attr_ADR_rev);
- if (err)
- goto err_out;
- err = device_create_file(osst_member, &dev_attr_media_version);
- if (err)
- goto err_out;
- err = device_create_file(osst_member, &dev_attr_capacity);
- if (err)
- goto err_out;
- err = device_create_file(osst_member, &dev_attr_BOT_frame);
- if (err)
- goto err_out;
- err = device_create_file(osst_member, &dev_attr_EOD_frame);
- if (err)
- goto err_out;
- err = device_create_file(osst_member, &dev_attr_file_count);
- if (err)
- goto err_out;
-
- return 0;
-
-err_out:
- osst_sysfs_destroy(dev);
- return err;
-}
-
-static void osst_sysfs_cleanup(void)
-{
- class_destroy(osst_sysfs_class);
-}
-
-/*
- * osst startup / cleanup code
- */
-
-static int osst_probe(struct device *dev)
-{
- struct scsi_device * SDp = to_scsi_device(dev);
- struct osst_tape * tpnt;
- struct st_modedef * STm;
- struct st_partstat * STps;
- struct osst_buffer * buffer;
- struct gendisk * drive;
- int i, dev_num, err = -ENODEV;
-
- if (SDp->type != TYPE_TAPE || !osst_supports(SDp))
- return -ENODEV;
-
- drive = alloc_disk(1);
- if (!drive) {
- printk(KERN_ERR "osst :E: Out of memory. Device not attached.\n");
- return -ENODEV;
- }
-
- /* if this is the first attach, build the infrastructure */
- write_lock(&os_scsi_tapes_lock);
- if (os_scsi_tapes == NULL) {
- os_scsi_tapes = kmalloc_array(osst_max_dev,
- sizeof(struct osst_tape *),
- GFP_ATOMIC);
- if (os_scsi_tapes == NULL) {
- write_unlock(&os_scsi_tapes_lock);
- printk(KERN_ERR "osst :E: Unable to allocate array for OnStream SCSI tapes.\n");
- goto out_put_disk;
- }
- for (i=0; i < osst_max_dev; ++i) os_scsi_tapes[i] = NULL;
- }
-
- if (osst_nr_dev >= osst_max_dev) {
- write_unlock(&os_scsi_tapes_lock);
- printk(KERN_ERR "osst :E: Too many tape devices (max. %d).\n", osst_max_dev);
- goto out_put_disk;
- }
-
- /* find a free minor number */
- for (i = 0; i < osst_max_dev && os_scsi_tapes[i]; i++)
- ;
- if(i >= osst_max_dev) panic ("Scsi_devices corrupt (osst)");
- dev_num = i;
-
- /* allocate a struct osst_tape for this device */
- tpnt = kzalloc(sizeof(struct osst_tape), GFP_ATOMIC);
- if (!tpnt) {
- write_unlock(&os_scsi_tapes_lock);
- printk(KERN_ERR "osst :E: Can't allocate device descriptor, device not attached.\n");
- goto out_put_disk;
- }
-
- /* allocate a buffer for this device */
- i = SDp->host->sg_tablesize;
- if (osst_max_sg_segs < i)
- i = osst_max_sg_segs;
- buffer = new_tape_buffer(1, SDp->host->unchecked_isa_dma, i);
- if (buffer == NULL) {
- write_unlock(&os_scsi_tapes_lock);
- printk(KERN_ERR "osst :E: Unable to allocate a tape buffer, device not attached.\n");
- kfree(tpnt);
- goto out_put_disk;
- }
- os_scsi_tapes[dev_num] = tpnt;
- tpnt->buffer = buffer;
- tpnt->device = SDp;
- drive->private_data = &tpnt->driver;
- sprintf(drive->disk_name, "osst%d", dev_num);
- tpnt->driver = &osst_template;
- tpnt->drive = drive;
- tpnt->in_use = 0;
- tpnt->capacity = 0xfffff;
- tpnt->dirty = 0;
- tpnt->drv_buffer = 1; /* Try buffering if no mode sense */
- tpnt->restr_dma = (SDp->host)->unchecked_isa_dma;
- tpnt->density = 0;
- tpnt->do_auto_lock = OSST_AUTO_LOCK;
- tpnt->can_bsr = OSST_IN_FILE_POS;
- tpnt->can_partitions = 0;
- tpnt->two_fm = OSST_TWO_FM;
- tpnt->fast_mteom = OSST_FAST_MTEOM;
- tpnt->scsi2_logical = OSST_SCSI2LOGICAL; /* FIXME */
- tpnt->write_threshold = osst_write_threshold;
- tpnt->default_drvbuffer = 0xff; /* No forced buffering */
- tpnt->partition = 0;
- tpnt->new_partition = 0;
- tpnt->nbr_partitions = 0;
- tpnt->min_block = 512;
- tpnt->max_block = OS_DATA_SIZE;
- tpnt->timeout = OSST_TIMEOUT;
- tpnt->long_timeout = OSST_LONG_TIMEOUT;
-
- /* Recognize OnStream tapes */
- /* We don't need to test for OnStream, as this has been done in detect () */
- tpnt->os_fw_rev = osst_parse_firmware_rev (SDp->rev);
- tpnt->omit_blklims = 1;
-
- tpnt->poll = (strncmp(SDp->model, "DI-", 3) == 0) ||
- (strncmp(SDp->model, "FW-", 3) == 0) || OSST_FW_NEED_POLL(tpnt->os_fw_rev,SDp);
- tpnt->frame_in_buffer = 0;
- tpnt->header_ok = 0;
- tpnt->linux_media = 0;
- tpnt->header_cache = NULL;
-
- for (i=0; i < ST_NBR_MODES; i++) {
- STm = &(tpnt->modes[i]);
- STm->defined = 0;
- STm->sysv = OSST_SYSV;
- STm->defaults_for_writes = 0;
- STm->do_async_writes = OSST_ASYNC_WRITES;
- STm->do_buffer_writes = OSST_BUFFER_WRITES;
- STm->do_read_ahead = OSST_READ_AHEAD;
- STm->default_compression = ST_DONT_TOUCH;
- STm->default_blksize = 512;
- STm->default_density = (-1); /* No forced density */
- }
-
- for (i=0; i < ST_NBR_PARTITIONS; i++) {
- STps = &(tpnt->ps[i]);
- STps->rw = ST_IDLE;
- STps->eof = ST_NOEOF;
- STps->at_sm = 0;
- STps->last_block_valid = 0;
- STps->drv_block = (-1);
- STps->drv_file = (-1);
- }
-
- tpnt->current_mode = 0;
- tpnt->modes[0].defined = 1;
- tpnt->modes[2].defined = 1;
- tpnt->density_changed = tpnt->compression_changed = tpnt->blksize_changed = 0;
-
- mutex_init(&tpnt->lock);
- osst_nr_dev++;
- write_unlock(&os_scsi_tapes_lock);
-
- {
- char name[8];
-
- /* Rewind entry */
- err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num), dev, tpnt, tape_name(tpnt));
- if (err)
- goto out_free_buffer;
-
- /* No-rewind entry */
- snprintf(name, 8, "%s%s", "n", tape_name(tpnt));
- err = osst_sysfs_add(MKDEV(OSST_MAJOR, dev_num + 128), dev, tpnt, name);
- if (err)
- goto out_free_sysfs1;
- }
-
- sdev_printk(KERN_INFO, SDp,
- "osst :I: Attached OnStream %.5s tape as %s\n",
- SDp->model, tape_name(tpnt));
-
- return 0;
-
-out_free_sysfs1:
- osst_sysfs_destroy(MKDEV(OSST_MAJOR, dev_num));
-out_free_buffer:
- kfree(buffer);
-out_put_disk:
- put_disk(drive);
- return err;
-};
-
-static int osst_remove(struct device *dev)
-{
- struct scsi_device * SDp = to_scsi_device(dev);
- struct osst_tape * tpnt;
- int i;
-
- if ((SDp->type != TYPE_TAPE) || (osst_nr_dev <= 0))
- return 0;
-
- write_lock(&os_scsi_tapes_lock);
- for(i=0; i < osst_max_dev; i++) {
- if((tpnt = os_scsi_tapes[i]) && (tpnt->device == SDp)) {
- osst_sysfs_destroy(MKDEV(OSST_MAJOR, i));
- osst_sysfs_destroy(MKDEV(OSST_MAJOR, i+128));
- tpnt->device = NULL;
- put_disk(tpnt->drive);
- os_scsi_tapes[i] = NULL;
- osst_nr_dev--;
- write_unlock(&os_scsi_tapes_lock);
- vfree(tpnt->header_cache);
- if (tpnt->buffer) {
- normalize_buffer(tpnt->buffer);
- kfree(tpnt->buffer);
- }
- kfree(tpnt);
- return 0;
- }
- }
- write_unlock(&os_scsi_tapes_lock);
- return 0;
-}
-
-static int __init init_osst(void)
-{
- int err;
-
- printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid);
-
- validate_options();
-
- err = osst_sysfs_init();
- if (err)
- return err;
-
- err = register_chrdev(OSST_MAJOR, "osst", &osst_fops);
- if (err < 0) {
- printk(KERN_ERR "osst :E: Unable to register major %d for OnStream tapes\n", OSST_MAJOR);
- goto err_out;
- }
-
- err = scsi_register_driver(&osst_template.gendrv);
- if (err)
- goto err_out_chrdev;
-
- err = osst_create_sysfs_files(&osst_template.gendrv);
- if (err)
- goto err_out_scsidrv;
-
- return 0;
-
-err_out_scsidrv:
- scsi_unregister_driver(&osst_template.gendrv);
-err_out_chrdev:
- unregister_chrdev(OSST_MAJOR, "osst");
-err_out:
- osst_sysfs_cleanup();
- return err;
-}
-
-static void __exit exit_osst (void)
-{
- int i;
- struct osst_tape * STp;
-
- osst_remove_sysfs_files(&osst_template.gendrv);
- scsi_unregister_driver(&osst_template.gendrv);
- unregister_chrdev(OSST_MAJOR, "osst");
- osst_sysfs_cleanup();
-
- if (os_scsi_tapes) {
- for (i=0; i < osst_max_dev; ++i) {
- if (!(STp = os_scsi_tapes[i])) continue;
- /* This is defensive, supposed to happen during detach */
- vfree(STp->header_cache);
- if (STp->buffer) {
- normalize_buffer(STp->buffer);
- kfree(STp->buffer);
- }
- put_disk(STp->drive);
- kfree(STp);
- }
- kfree(os_scsi_tapes);
- }
- printk(KERN_INFO "osst :I: Unloaded.\n");
-}
-
-module_init(init_osst);
-module_exit(exit_osst);