summaryrefslogtreecommitdiff
path: root/drivers/scsi/tmscsim.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/tmscsim.h')
-rw-r--r--drivers/scsi/tmscsim.h551
1 files changed, 0 insertions, 551 deletions
diff --git a/drivers/scsi/tmscsim.h b/drivers/scsi/tmscsim.h
deleted file mode 100644
index 3d1bb4ad1826..000000000000
--- a/drivers/scsi/tmscsim.h
+++ /dev/null
@@ -1,551 +0,0 @@
-/***********************************************************************
-;* File Name : TMSCSIM.H *
-;* TEKRAM DC-390(T) PCI SCSI Bus Master Host Adapter *
-;* Device Driver *
-;***********************************************************************/
-/* $Id: tmscsim.h,v 2.15.2.3 2000/11/17 20:52:27 garloff Exp $ */
-
-#ifndef _TMSCSIM_H
-#define _TMSCSIM_H
-
-#include <linux/types.h>
-
-#define SCSI_IRQ_NONE 255
-
-#define MAX_ADAPTER_NUM 4
-#define MAX_SG_LIST_BUF 16 /* Not used */
-#define MAX_SCSI_ID 8
-#define MAX_SRB_CNT 50 /* Max number of started commands */
-
-#define SEL_TIMEOUT 153 /* 250 ms selection timeout (@ 40 MHz) */
-
-/*
-;-----------------------------------------------------------------------
-; SCSI Request Block
-;-----------------------------------------------------------------------
-*/
-struct dc390_srb
-{
-//u8 CmdBlock[12];
-
-struct dc390_srb *pNextSRB;
-struct dc390_dcb *pSRBDCB;
-struct scsi_cmnd *pcmd;
-struct scatterlist *pSegmentList;
-
-struct scatterlist Segmentx; /* make a one entry of S/G list table */
-
-unsigned long SGBusAddr; /*;a segment starting address as seen by AM53C974A
- in CPU endianness. We're only getting 32-bit bus
- addresses by default */
-unsigned long SGToBeXferLen; /*; to be xfer length */
-unsigned long TotalXferredLen;
-unsigned long SavedTotXLen;
-unsigned long Saved_Ptr;
-u32 SRBState;
-
-u8 SRBStatus;
-u8 SRBFlag; /*; b0-AutoReqSense,b6-Read,b7-write */
- /*; b4-settimeout,b5-Residual valid */
-u8 AdaptStatus;
-u8 TargetStatus;
-
-u8 ScsiPhase;
-s8 TagNumber;
-u8 SGIndex;
-u8 SGcount;
-
-u8 MsgCnt;
-u8 EndMessage;
-
-u8 MsgInBuf[6];
-u8 MsgOutBuf[6];
-
-//u8 IORBFlag; /*;81h-Reset, 2-retry */
-};
-
-
-/*
-;-----------------------------------------------------------------------
-; Device Control Block
-;-----------------------------------------------------------------------
-*/
-struct dc390_dcb
-{
-struct dc390_dcb *pNextDCB;
-struct dc390_acb *pDCBACB;
-
-/* Queued SRBs */
-struct dc390_srb *pGoingSRB;
-struct dc390_srb *pGoingLast;
-struct dc390_srb *pActiveSRB;
-u8 GoingSRBCnt;
-
-u32 TagMask;
-
-u8 TargetID; /*; SCSI Target ID (SCSI Only) */
-u8 TargetLUN; /*; SCSI Log. Unit (SCSI Only) */
-u8 DevMode;
-u8 DCBFlag;
-
-u8 CtrlR1;
-u8 CtrlR3;
-u8 CtrlR4;
-
-u8 SyncMode; /*; 0:async mode */
-u8 NegoPeriod; /*;for nego. */
-u8 SyncPeriod; /*;for reg. */
-u8 SyncOffset; /*;for reg. and nego.(low nibble) */
-};
-
-
-/*
-;-----------------------------------------------------------------------
-; Adapter Control Block
-;-----------------------------------------------------------------------
-*/
-struct dc390_acb
-{
-struct Scsi_Host *pScsiHost;
-u16 IOPortBase;
-u8 IRQLevel;
-u8 status;
-
-u8 SRBCount;
-u8 AdapterIndex; /*; nth Adapter this driver */
-u8 DCBCnt;
-
-u8 TagMaxNum;
-u8 ACBFlag;
-u8 Gmode2;
-u8 scan_devices;
-
-struct dc390_dcb *pLinkDCB;
-struct dc390_dcb *pLastDCB;
-struct dc390_dcb *pDCBRunRobin;
-
-struct dc390_dcb *pActiveDCB;
-struct dc390_srb *pFreeSRB;
-struct dc390_srb *pTmpSRB;
-
-u8 msgin123[4];
-u8 Connected;
-u8 pad;
-
-#if defined(USE_SPINLOCKS) && USE_SPINLOCKS > 1 && (defined(CONFIG_SMP) || DEBUG_SPINLOCKS > 0)
-spinlock_t lock;
-#endif
-u8 sel_timeout;
-u8 glitch_cfg;
-
-u8 MsgLen;
-u8 Ignore_IRQ; /* Not used */
-
-struct pci_dev *pdev;
-
-unsigned long last_reset;
-unsigned long Cmds;
-u32 SelLost;
-u32 SelConn;
-u32 CmdInQ;
-u32 CmdOutOfSRB;
-
-struct dc390_srb TmpSRB;
-struct dc390_srb SRB_array[MAX_SRB_CNT]; /* 50 SRBs */
-};
-
-
-/*;-----------------------------------------------------------------------*/
-
-
-#define BIT31 0x80000000
-#define BIT30 0x40000000
-#define BIT29 0x20000000
-#define BIT28 0x10000000
-#define BIT27 0x08000000
-#define BIT26 0x04000000
-#define BIT25 0x02000000
-#define BIT24 0x01000000
-#define BIT23 0x00800000
-#define BIT22 0x00400000
-#define BIT21 0x00200000
-#define BIT20 0x00100000
-#define BIT19 0x00080000
-#define BIT18 0x00040000
-#define BIT17 0x00020000
-#define BIT16 0x00010000
-#define BIT15 0x00008000
-#define BIT14 0x00004000
-#define BIT13 0x00002000
-#define BIT12 0x00001000
-#define BIT11 0x00000800
-#define BIT10 0x00000400
-#define BIT9 0x00000200
-#define BIT8 0x00000100
-#define BIT7 0x00000080
-#define BIT6 0x00000040
-#define BIT5 0x00000020
-#define BIT4 0x00000010
-#define BIT3 0x00000008
-#define BIT2 0x00000004
-#define BIT1 0x00000002
-#define BIT0 0x00000001
-
-/*;---UnitCtrlFlag */
-#define UNIT_ALLOCATED BIT0
-#define UNIT_INFO_CHANGED BIT1
-#define FORMATING_MEDIA BIT2
-#define UNIT_RETRY BIT3
-
-/*;---UnitFlags */
-#define DASD_SUPPORT BIT0
-#define SCSI_SUPPORT BIT1
-#define ASPI_SUPPORT BIT2
-
-/*;----SRBState machine definition */
-#define SRB_FREE 0
-#define SRB_WAIT BIT0
-#define SRB_READY BIT1
-#define SRB_MSGOUT BIT2 /*;arbitration+msg_out 1st byte*/
-#define SRB_MSGIN BIT3
-#define SRB_MSGIN_MULTI BIT4
-#define SRB_COMMAND BIT5
-#define SRB_START_ BIT6 /*;arbitration+msg_out+command_out*/
-#define SRB_DISCONNECT BIT7
-#define SRB_DATA_XFER BIT8
-#define SRB_XFERPAD BIT9
-#define SRB_STATUS BIT10
-#define SRB_COMPLETED BIT11
-#define SRB_ABORT_SENT BIT12
-#define DO_SYNC_NEGO BIT13
-#define SRB_UNEXPECT_RESEL BIT14
-
-/*;---SRBstatus */
-#define SRB_OK BIT0
-#define ABORTION BIT1
-#define OVER_RUN BIT2
-#define UNDER_RUN BIT3
-#define PARITY_ERROR BIT4
-#define SRB_ERROR BIT5
-
-/*;---ACBFlag */
-#define RESET_DEV BIT0
-#define RESET_DETECT BIT1
-#define RESET_DONE BIT2
-
-/*;---DCBFlag */
-#define ABORT_DEV_ BIT0
-
-/*;---SRBFlag */
-#define DATAOUT BIT7
-#define DATAIN BIT6
-#define RESIDUAL_VALID BIT5
-#define ENABLE_TIMER BIT4
-#define RESET_DEV0 BIT2
-#define ABORT_DEV BIT1
-#define AUTO_REQSENSE BIT0
-
-/*;---Adapter status */
-#define H_STATUS_GOOD 0
-#define H_SEL_TIMEOUT 0x11
-#define H_OVER_UNDER_RUN 0x12
-#define H_UNEXP_BUS_FREE 0x13
-#define H_TARGET_PHASE_F 0x14
-#define H_INVALID_CCB_OP 0x16
-#define H_LINK_CCB_BAD 0x17
-#define H_BAD_TARGET_DIR 0x18
-#define H_DUPLICATE_CCB 0x19
-#define H_BAD_CCB_OR_SG 0x1A
-#define H_ABORT 0x0FF
-
-/* cmd->result */
-#define RES_TARGET 0x000000FF /* Target State */
-#define RES_TARGET_LNX STATUS_MASK /* Only official ... */
-#define RES_ENDMSG 0x0000FF00 /* End Message */
-#define RES_DID 0x00FF0000 /* DID_ codes */
-#define RES_DRV 0xFF000000 /* DRIVER_ codes */
-
-#define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
-#define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
-
-#define SET_RES_TARGET(who, tgt) do { who &= ~RES_TARGET; who |= (int)(tgt); } while (0)
-#define SET_RES_TARGET_LNX(who, tgt) do { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; } while (0)
-#define SET_RES_MSG(who, msg) do { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; } while (0)
-#define SET_RES_DID(who, did) do { who &= ~RES_DID; who |= (int)(did) << 16; } while (0)
-#define SET_RES_DRV(who, drv) do { who &= ~RES_DRV; who |= (int)(drv) << 24; } while (0)
-
-/*;---Sync_Mode */
-#define SYNC_DISABLE 0
-#define SYNC_ENABLE BIT0
-#define SYNC_NEGO_DONE BIT1
-#define WIDE_ENABLE BIT2 /* Not used ;-) */
-#define WIDE_NEGO_DONE BIT3 /* Not used ;-) */
-#define EN_TAG_QUEUEING BIT4
-#define EN_ATN_STOP BIT5
-
-#define SYNC_NEGO_OFFSET 15
-
-/*;---SCSI bus phase*/
-#define SCSI_DATA_OUT 0
-#define SCSI_DATA_IN 1
-#define SCSI_COMMAND 2
-#define SCSI_STATUS_ 3
-#define SCSI_NOP0 4
-#define SCSI_NOP1 5
-#define SCSI_MSG_OUT 6
-#define SCSI_MSG_IN 7
-
-/*;----SCSI MSG BYTE*/ /* see scsi/scsi.h */ /* One is missing ! */
-#define ABORT_TAG 0x0d
-
-/*
- * SISC query queue
- */
-typedef struct {
- dma_addr_t saved_dma_handle;
-} dc390_cmd_scp_t;
-
-/*
-;==========================================================
-; EEPROM byte offset
-;==========================================================
-*/
-typedef struct _EEprom
-{
-u8 EE_MODE1;
-u8 EE_SPEED;
-u8 xx1;
-u8 xx2;
-} EEprom, *PEEprom;
-
-#define REAL_EE_ADAPT_SCSI_ID 64
-#define REAL_EE_MODE2 65
-#define REAL_EE_DELAY 66
-#define REAL_EE_TAG_CMD_NUM 67
-
-#define EE_ADAPT_SCSI_ID 32
-#define EE_MODE2 33
-#define EE_DELAY 34
-#define EE_TAG_CMD_NUM 35
-
-#define EE_LEN 40
-
-/*; EE_MODE1 bits definition*/
-#define PARITY_CHK_ BIT0
-#define SYNC_NEGO_ BIT1
-#define EN_DISCONNECT_ BIT2
-#define SEND_START_ BIT3
-#define TAG_QUEUEING_ BIT4
-
-/*; EE_MODE2 bits definition*/
-#define MORE2_DRV BIT0
-#define GREATER_1G BIT1
-#define RST_SCSI_BUS BIT2
-#define ACTIVE_NEGATION BIT3
-#define NO_SEEK BIT4
-#define LUN_CHECK BIT5
-
-#define ENABLE_CE 1
-#define DISABLE_CE 0
-#define EEPROM_READ 0x80
-
-/*
-;==========================================================
-; AMD 53C974 Registers bit Definition
-;==========================================================
-*/
-/*
-;====================
-; SCSI Register
-;====================
-*/
-
-/*; Command Reg.(+0CH) (rw) */
-#define DMA_COMMAND BIT7
-#define NOP_CMD 0
-#define CLEAR_FIFO_CMD 1
-#define RST_DEVICE_CMD 2
-#define RST_SCSI_BUS_CMD 3
-
-#define INFO_XFER_CMD 0x10
-#define INITIATOR_CMD_CMPLTE 0x11
-#define MSG_ACCEPTED_CMD 0x12
-#define XFER_PAD_BYTE 0x18
-#define SET_ATN_CMD 0x1A
-#define RESET_ATN_CMD 0x1B
-
-#define SEL_WO_ATN 0x41 /* currently not used */
-#define SEL_W_ATN 0x42
-#define SEL_W_ATN_STOP 0x43
-#define SEL_W_ATN3 0x46
-#define EN_SEL_RESEL 0x44
-#define DIS_SEL_RESEL 0x45 /* currently not used */
-#define RESEL 0x40 /* " */
-#define RESEL_ATN3 0x47 /* " */
-
-#define DATA_XFER_CMD INFO_XFER_CMD
-
-
-/*; SCSI Status Reg.(+10H) (r) */
-#define INTERRUPT BIT7
-#define ILLEGAL_OP_ERR BIT6
-#define PARITY_ERR BIT5
-#define COUNT_2_ZERO BIT4
-#define GROUP_CODE_VALID BIT3
-#define SCSI_PHASE_MASK (BIT2+BIT1+BIT0)
-/* BIT2: MSG phase; BIT1: C/D physe; BIT0: I/O phase */
-
-/*; Interrupt Status Reg.(+14H) (r) */
-#define SCSI_RESET BIT7
-#define INVALID_CMD BIT6
-#define DISCONNECTED BIT5
-#define SERVICE_REQUEST BIT4
-#define SUCCESSFUL_OP BIT3
-#define RESELECTED BIT2
-#define SEL_ATTENTION BIT1
-#define SELECTED BIT0
-
-/*; Internal State Reg.(+18H) (r) */
-#define SYNC_OFFSET_FLAG BIT3
-#define INTRN_STATE_MASK (BIT2+BIT1+BIT0)
-/* 0x04: Sel. successful (w/o stop), 0x01: Sel. successful (w/ stop) */
-
-/*; Clock Factor Reg.(+24H) (w) */
-#define CLK_FREQ_40MHZ 0
-#define CLK_FREQ_35MHZ (BIT2+BIT1+BIT0)
-#define CLK_FREQ_30MHZ (BIT2+BIT1)
-#define CLK_FREQ_25MHZ (BIT2+BIT0)
-#define CLK_FREQ_20MHZ BIT2
-#define CLK_FREQ_15MHZ (BIT1+BIT0)
-#define CLK_FREQ_10MHZ BIT1
-
-/*; Control Reg. 1(+20H) (rw) */
-#define EXTENDED_TIMING BIT7
-#define DIS_INT_ON_SCSI_RST BIT6
-#define PARITY_ERR_REPO BIT4
-#define SCSI_ID_ON_BUS (BIT2+BIT1+BIT0) /* host adapter ID */
-
-/*; Control Reg. 2(+2CH) (rw) */
-#define EN_FEATURE BIT6
-#define EN_SCSI2_CMD BIT3
-
-/*; Control Reg. 3(+30H) (rw) */
-#define ID_MSG_CHECK BIT7
-#define EN_QTAG_MSG BIT6
-#define EN_GRP2_CMD BIT5
-#define FAST_SCSI BIT4 /* ;10MB/SEC */
-#define FAST_CLK BIT3 /* ;25 - 40 MHZ */
-
-/*; Control Reg. 4(+34H) (rw) */
-#define EATER_12NS 0
-#define EATER_25NS BIT7
-#define EATER_35NS BIT6
-#define EATER_0NS (BIT7+BIT6)
-#define REDUCED_POWER BIT5
-#define CTRL4_RESERVED BIT4 /* must be 1 acc. to AM53C974.c */
-#define NEGATE_REQACKDATA BIT2
-#define NEGATE_REQACK BIT3
-
-#define GLITCH_TO_NS(x) (((~x>>6 & 2) >> 1) | ((x>>6 & 1) << 1 ^ (x>>6 & 2)))
-#define NS_TO_GLITCH(y) (((~y<<7) | ~((y<<6) ^ ((y<<5 & 1<<6) | ~0x40))) & 0xc0)
-
-/*
-;====================
-; DMA Register
-;====================
-*/
-/*; DMA Command Reg.(+40H) (rw) */
-#define READ_DIRECTION BIT7
-#define WRITE_DIRECTION 0
-#define EN_DMA_INT BIT6
-#define EN_PAGE_INT BIT5 /* page transfer interrupt enable */
-#define MAP_TO_MDL BIT4
-#define DIAGNOSTIC BIT2
-#define DMA_IDLE_CMD 0
-#define DMA_BLAST_CMD BIT0
-#define DMA_ABORT_CMD BIT1
-#define DMA_START_CMD (BIT1+BIT0)
-
-/*; DMA Status Reg.(+54H) (r) */
-#define PCI_MS_ABORT BIT6
-#define BLAST_COMPLETE BIT5
-#define SCSI_INTERRUPT BIT4
-#define DMA_XFER_DONE BIT3
-#define DMA_XFER_ABORT BIT2
-#define DMA_XFER_ERROR BIT1
-#define POWER_DOWN BIT0
-
-/*; DMA SCSI Bus and Ctrl.(+70H) */
-#define EN_INT_ON_PCI_ABORT BIT25
-#define WRT_ERASE_DMA_STAT BIT24
-#define PW_DOWN_CTRL BIT21
-#define SCSI_BUSY BIT20
-#define SCLK BIT19
-#define SCAM BIT18
-#define SCSI_LINES 0x0003ffff
-
-/*
-;==========================================================
-; SCSI Chip register address offset
-;==========================================================
-;Registers are rw unless declared otherwise
-*/
-#define CtcReg_Low 0x00 /* r curr. transfer count */
-#define CtcReg_Mid 0x04 /* r */
-#define CtcReg_High 0x38 /* r */
-#define ScsiFifo 0x08
-#define ScsiCmd 0x0C
-#define Scsi_Status 0x10 /* r */
-#define INT_Status 0x14 /* r */
-#define Sync_Period 0x18 /* w */
-#define Sync_Offset 0x1C /* w */
-#define Clk_Factor 0x24 /* w */
-#define CtrlReg1 0x20
-#define CtrlReg2 0x2C
-#define CtrlReg3 0x30
-#define CtrlReg4 0x34
-#define DMA_Cmd 0x40
-#define DMA_XferCnt 0x44 /* rw starting transfer count (32 bit) */
-#define DMA_XferAddr 0x48 /* rw starting physical address (32 bit) */
-#define DMA_Wk_ByteCntr 0x4C /* r working byte counter */
-#define DMA_Wk_AddrCntr 0x50 /* r working address counter */
-#define DMA_Status 0x54 /* r */
-#define DMA_MDL_Addr 0x58 /* rw starting MDL address */
-#define DMA_Wk_MDL_Cntr 0x5C /* r working MDL counter */
-#define DMA_ScsiBusCtrl 0x70 /* rw SCSI Bus, PCI/DMA Ctrl */
-
-#define StcReg_Low CtcReg_Low /* w start transfer count */
-#define StcReg_Mid CtcReg_Mid /* w */
-#define StcReg_High CtcReg_High /* w */
-#define Scsi_Dest_ID Scsi_Status /* w */
-#define Scsi_TimeOut INT_Status /* w */
-#define Intern_State Sync_Period /* r */
-#define Current_Fifo Sync_Offset /* r Curr. FIFO / int. state */
-
-
-#define DC390_read8(address) \
- (inb (pACB->IOPortBase + (address)))
-
-#define DC390_read8_(address, base) \
- (inb ((u16)(base) + (address)))
-
-#define DC390_read16(address) \
- (inw (pACB->IOPortBase + (address)))
-
-#define DC390_read32(address) \
- (inl (pACB->IOPortBase + (address)))
-
-#define DC390_write8(address,value) \
- outb ((value), pACB->IOPortBase + (address))
-
-#define DC390_write8_(address,value,base) \
- outb ((value), (u16)(base) + (address))
-
-#define DC390_write16(address,value) \
- outw ((value), pACB->IOPortBase + (address))
-
-#define DC390_write32(address,value) \
- outl ((value), pACB->IOPortBase + (address))
-
-
-#endif /* _TMSCSIM_H */