diff options
Diffstat (limited to 'drivers/scsi/ufs/ufshcd.c')
-rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 71 |
1 files changed, 52 insertions, 19 deletions
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 6812e80fc8c4..035011860882 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -682,6 +682,11 @@ start: */ if (ufshcd_can_hibern8_during_gating(hba) && ufshcd_is_link_hibern8(hba)) { + if (async) { + rc = -EAGAIN; + hba->clk_gating.active_reqs--; + break; + } spin_unlock_irqrestore(hba->host->host_lock, flags); flush_work(&hba->clk_gating.ungate_work); spin_lock_irqsave(hba->host->host_lock, flags); @@ -941,7 +946,8 @@ int ufshcd_copy_query_response(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) memcpy(&query_res->upiu_res, &lrbp->ucd_rsp_ptr->qr, QUERY_OSF_SIZE); /* Get the descriptor */ - if (lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { + if (hba->dev_cmd.query.descriptor && + lrbp->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { u8 *descp = (u8 *)lrbp->ucd_rsp_ptr + GENERAL_UPIU_REQUEST_SIZE; u16 resp_len; @@ -2005,10 +2011,10 @@ static int __ufshcd_query_descriptor(struct ufs_hba *hba, goto out_unlock; } - hba->dev_cmd.query.descriptor = NULL; *buf_len = be16_to_cpu(response->upiu_res.length); out_unlock: + hba->dev_cmd.query.descriptor = NULL; mutex_unlock(&hba->dev_cmd.lock); out: ufshcd_release(hba); @@ -4391,19 +4397,30 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba) u32 intr_status, enabled_intr_status; irqreturn_t retval = IRQ_NONE; struct ufs_hba *hba = __hba; + int retries = hba->nutrs; spin_lock(hba->host->host_lock); intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); - enabled_intr_status = - intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); - if (intr_status) - ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + /* + * There could be max of hba->nutrs reqs in flight and in worst case + * if the reqs get finished 1 by 1 after the interrupt status is + * read, make sure we handle them by checking the interrupt status + * again in a loop until we process all of the reqs before returning. + */ + do { + enabled_intr_status = + intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); + if (intr_status) + ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); + if (enabled_intr_status) { + ufshcd_sl_intr(hba, enabled_intr_status); + retval = IRQ_HANDLED; + } + + intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); + } while (intr_status && --retries); - if (enabled_intr_status) { - ufshcd_sl_intr(hba, enabled_intr_status); - retval = IRQ_HANDLED; - } spin_unlock(hba->host->host_lock); return retval; } @@ -4875,19 +4892,19 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba, goto out; } - if (hba->vreg_info.vcc) + if (hba->vreg_info.vcc && hba->vreg_info.vcc->max_uA) icc_level = ufshcd_get_max_icc_level( hba->vreg_info.vcc->max_uA, POWER_DESC_MAX_ACTV_ICC_LVLS - 1, &desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]); - if (hba->vreg_info.vccq) + if (hba->vreg_info.vccq && hba->vreg_info.vccq->max_uA) icc_level = ufshcd_get_max_icc_level( hba->vreg_info.vccq->max_uA, icc_level, &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]); - if (hba->vreg_info.vccq2) + if (hba->vreg_info.vccq2 && hba->vreg_info.vccq2->max_uA) icc_level = ufshcd_get_max_icc_level( hba->vreg_info.vccq2->max_uA, icc_level, @@ -5346,7 +5363,8 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) ufshcd_init_icc_levels(hba); /* Add required well known logical units to scsi mid layer */ - if (ufshcd_scsi_add_wlus(hba)) + ret = ufshcd_scsi_add_wlus(hba); + if (ret) goto out; scsi_scan_host(hba->host); @@ -5449,6 +5467,15 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, if (!vreg) return 0; + /* + * "set_load" operation shall be required on those regulators + * which specifically configured current limitation. Otherwise + * zero max_uA may cause unexpected behavior when regulator is + * enabled or set as high power mode. + */ + if (!vreg->max_uA) + return 0; + ret = regulator_set_load(vreg->reg, ua); if (ret < 0) { dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n", @@ -5495,12 +5522,15 @@ static int ufshcd_config_vreg(struct device *dev, name = vreg->name; if (regulator_count_voltages(reg) > 0) { - min_uV = on ? vreg->min_uV : 0; - ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); - if (ret) { - dev_err(dev, "%s: %s set voltage failed, err=%d\n", + if (vreg->min_uV && vreg->max_uV) { + min_uV = on ? vreg->min_uV : 0; + ret = regulator_set_voltage(reg, min_uV, vreg->max_uV); + if (ret) { + dev_err(dev, + "%s: %s set voltage failed, err=%d\n", __func__, name, ret); - goto out; + goto out; + } } uA_load = on ? vreg->max_uA : 0; @@ -6479,6 +6509,9 @@ int ufshcd_shutdown(struct ufs_hba *hba) { int ret = 0; + if (!hba->is_powered) + goto out; + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba)) goto out; |