diff options
Diffstat (limited to 'drivers/serial/8250.c')
| -rw-r--r-- | drivers/serial/8250.c | 59 |
1 files changed, 39 insertions, 20 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 891e1dd65f24..24110f6f61e0 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -241,7 +241,7 @@ static const struct serial8250_config uart_config[] = { .fifo_size = 128, .tx_loadsz = 128, .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, + .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP, }, [PORT_16654] = { .name = "ST16654", @@ -300,9 +300,16 @@ static const struct serial8250_config uart_config[] = { .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, .flags = UART_CAP_FIFO | UART_CAP_AFE, }, + [PORT_U6_16550A] = { + .name = "U6_16550A", + .fifo_size = 64, + .tx_loadsz = 64, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO | UART_CAP_AFE, + }, }; -#if defined (CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_MIPS_ALCHEMY) /* Au1x00 UART hardware has a weird register layout */ static const u8 au_io_in_map[] = { @@ -422,7 +429,6 @@ static unsigned int mem32_serial_in(struct uart_port *p, int offset) return readl(p->membase + offset); } -#ifdef CONFIG_SERIAL_8250_AU1X00 static unsigned int au_serial_in(struct uart_port *p, int offset) { offset = map_8250_in_reg(p, offset) << p->regshift; @@ -434,7 +440,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value) offset = map_8250_out_reg(p, offset) << p->regshift; __raw_writel(value, p->membase + offset); } -#endif static unsigned int tsi_serial_in(struct uart_port *p, int offset) { @@ -503,12 +508,11 @@ static void set_io_from_upio(struct uart_port *p) p->serial_out = mem32_serial_out; break; -#ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: p->serial_in = au_serial_in; p->serial_out = au_serial_out; break; -#endif + case UPIO_TSI: p->serial_in = tsi_serial_in; p->serial_out = tsi_serial_out; @@ -535,9 +539,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value) switch (p->iotype) { case UPIO_MEM: case UPIO_MEM32: -#ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: -#endif case UPIO_DWAPB: p->serial_out(p, offset, value); p->serial_in(p, UART_LCR); /* safe, no side-effects */ @@ -573,7 +575,7 @@ static inline void _serial_dl_write(struct uart_8250_port *up, int value) serial_outp(up, UART_DLM, value >> 8 & 0xff); } -#if defined(CONFIG_SERIAL_8250_AU1X00) +#if defined(CONFIG_MIPS_ALCHEMY) /* Au1x00 haven't got a standard divisor latch */ static int serial_dl_read(struct uart_8250_port *up) { @@ -1075,6 +1077,15 @@ static void autoconfig_16550a(struct uart_8250_port *up) DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 "); } serial_outp(up, UART_IER, iersave); + + /* + * We distinguish between 16550A and U6 16550A by counting + * how many bytes are in the FIFO. + */ + if (up->port.type == PORT_16550A && size_fifo(up) == 64) { + up->port.type = PORT_U6_16550A; + up->capabilities |= UART_CAP_AFE; + } } /* @@ -2229,9 +2240,9 @@ static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int return quot; } -static void -serial8250_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) +void +serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { struct uart_8250_port *up = (struct uart_8250_port *)port; unsigned char cval, fcr = 0; @@ -2407,16 +2418,22 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios, if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); } +EXPORT_SYMBOL(serial8250_do_set_termios); static void -serial8250_set_ldisc(struct uart_port *port) +serial8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) { - int line = port->line; - - if (line >= port->state->port.tty->driver->num) - return; + if (port->set_termios) + port->set_termios(port, termios, old); + else + serial8250_do_set_termios(port, termios, old); +} - if (port->state->port.tty->ldisc->ops->num == N_PPS) { +static void +serial8250_set_ldisc(struct uart_port *port, int new) +{ + if (new == N_PPS) { port->flags |= UPF_HARDPPS_CD; serial8250_enable_ms(port); } else @@ -2596,11 +2613,9 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); -#ifdef CONFIG_SERIAL_8250_AU1X00 /* if access method is AU, it is a 16550 with a quirk */ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; -#endif if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); @@ -2994,6 +3009,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.type = p->type; port.serial_in = p->serial_in; port.serial_out = p->serial_out; + port.set_termios = p->set_termios; port.dev = &dev->dev; port.irqflags |= irqflag; ret = serial8250_register_port(&port); @@ -3157,6 +3173,9 @@ int serial8250_register_port(struct uart_port *port) uart->port.serial_in = port->serial_in; if (port->serial_out) uart->port.serial_out = port->serial_out; + /* Possibly override set_termios call */ + if (port->set_termios) + uart->port.set_termios = port->set_termios; ret = uart_add_one_port(&serial8250_reg, &uart->port); if (ret == 0) |