1 files changed, 0 insertions, 163 deletions

diff --git a/drivers/serial/mxs-auart.c b/drivers/serial/mxs-auart.c
index 63d7d9128efc..0791af105f72 100644
--- a/drivers/serial/mxs-auart.c
+++ b/drivers/serial/mxs-auart.c
@@ -19,7 +19,6 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/console.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -48,8 +47,6 @@
 #define MXS_AUART_MAJOR	242
 #define MXS_AUART_RX_THRESHOLD 16
 
-static struct uart_driver auart_driver;
-
 struct mxs_auart_port {
 	struct uart_port port;
 
@@ -788,160 +785,7 @@ static struct uart_ops mxs_auart_ops = {
 	.config_port    = mxs_auart_config_port,
 	.verify_port    = mxs_auart_verify_port,
 };
-#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
-static struct mxs_auart_port auart_port[CONFIG_MXS_AUART_PORTS] = {};
-
-static void
-auart_console_write(struct console *co, const char *s, unsigned int count)
-{
-	struct uart_port *port;
-	unsigned int status, old_cr;
-	int i;
-
-	if (co->index >	CONFIG_MXS_AUART_PORTS || co->index < 0)
-		return;
 
-	port = &auart_port[co->index].port;
-
-	/* First save the CR then disable the interrupts */
-	old_cr = __raw_readl(port->membase + HW_UARTAPP_CTRL2);
-	__raw_writel(BM_UARTAPP_CTRL2_UARTEN | BM_UARTAPP_CTRL2_TXE,
-		     port->membase + HW_UARTAPP_CTRL2_SET);
-
-	/* Now, do each character */
-	for (i = 0; i < count; i++) {
-		do {
-			status = __raw_readl(port->membase + HW_UARTAPP_STAT);
-		} while (status & BM_UARTAPP_STAT_TXFF);
-
-		__raw_writel(s[i], port->membase + HW_UARTAPP_DATA);
-		if (s[i] == '\n') {
-			do {
-				status = __raw_readl(port->membase +
-						     HW_UARTAPP_STAT);
-			} while (status & BM_UARTAPP_STAT_TXFF);
-			__raw_writel('\r', port->membase + HW_UARTAPP_DATA);
-		}
-	}
-
-	/*
-	 *      Finally, wait for transmitter to become empty
-	 *      and restore the TCR
-	 */
-	do {
-		status = __raw_readl(port->membase + HW_UARTAPP_STAT);
-	} while (status & BM_UARTAPP_STAT_BUSY);
-	__raw_writel(old_cr, port->membase + HW_UARTAPP_CTRL2);
-}
-
-static void __init
-auart_console_get_options(struct uart_port *port, int *baud,
-			  int *parity, int *bits)
-{
-	if (__raw_readl(port->membase + HW_UARTAPP_CTRL2)
-				& BM_UARTAPP_CTRL2_UARTEN) {
-		unsigned int lcr_h, quot;
-		lcr_h = __raw_readl(port->membase + HW_UARTAPP_LINECTRL);
-
-		*parity = 'n';
-		if (lcr_h & BM_UARTAPP_LINECTRL_PEN) {
-			if (lcr_h & BM_UARTAPP_LINECTRL_EPS)
-				*parity = 'e';
-			else
-				*parity = 'o';
-		}
-
-		if ((lcr_h & BM_UARTAPP_LINECTRL_WLEN)
-				== BF_UARTAPP_LINECTRL_WLEN(2))
-			*bits = 7;
-		else
-			*bits = 8;
-
-		quot = (((__raw_readl(port->membase + HW_UARTAPP_LINECTRL)
-				& BM_UARTAPP_LINECTRL_BAUD_DIVINT))
-				    >> (BP_UARTAPP_LINECTRL_BAUD_DIVINT - 6))
-			| (((__raw_readl(port->membase + HW_UARTAPP_LINECTRL)
-				& BM_UARTAPP_LINECTRL_BAUD_DIVFRAC))
-					>> BP_UARTAPP_LINECTRL_BAUD_DIVFRAC);
-		if (quot == 0)
-			quot = 1;
-		*baud = (port->uartclk << 2) / quot;
-	}
-}
-
-static int __init auart_console_setup(struct console *co, char *options)
-{
-	struct mxs_auart_port *port;
-	int baud = 115200;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index > CONFIG_MXS_AUART_PORTS || co->index < 0)
-		return -EINVAL;
-
-	port = &auart_port[co->index].port;
-
-	if (port->port.membase == 0) {
-		if (cpu_is_mx23()) {
-			if (co->index == 1) {
-				port->port.membase = IO_ADDRESS(0x8006C000);
-				port->port.mapbase = 0x8006C000;
-			} else {
-				port->port.membase = IO_ADDRESS(0x8006E000);
-				port->port.mapbase = 0x8006E000;
-			}
-		}
-
-		port->port.fifosize = 16;
-		port->port.ops = &mxs_auart_ops;
-		port->port.flags = ASYNC_BOOT_AUTOCONF;
-		port->port.line = 0;
-	}
-	mxs_auart_reset(port);
-
-	__raw_writel(BM_UARTAPP_CTRL2_UARTEN,
-		port->port.membase + HW_UARTAPP_CTRL2_SET);
-
-	if (port->clk == NULL || IS_ERR(port->clk)) {
-		port->clk = clk_get(NULL, "uart");
-		if (port->clk == NULL || IS_ERR(port->clk))
-			return -ENODEV;
-		port->port.uartclk = clk_get_rate(port->clk);
-	}
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-	else
-		auart_console_get_options(port, &baud, &parity, &bits);
-	return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct console auart_console = {
-	.name = "ttySP",
-	.write = auart_console_write,
-	.device = uart_console_device,
-	.setup = auart_console_setup,
-	.flags = CON_PRINTBUFFER,
-	.index = -1,
-	.data = &auart_driver,
-};
-
-#ifdef CONFIG_MXS_EARLY_CONSOLE
-static int __init auart_console_init(void)
-{
-	register_console(&auart_console);
-	return 0;
-}
-
-console_initcall(auart_console_init);
-#endif
-
-#endif
 static struct uart_driver auart_driver = {
 	.owner = THIS_MODULE,
 	.driver_name = "auart",
@@ -949,9 +793,6 @@ static struct uart_driver auart_driver = {
 	.major = MXS_AUART_MAJOR,
 	.minor = 0,
 	.nr = CONFIG_MXS_AUART_PORTS,
-#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
-	.cons = &auart_console,
-#endif
 };
 
 static int __devinit mxs_auart_probe(struct platform_device *pdev)
@@ -1032,10 +873,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 1);
 
-#ifdef CONFIG_SERIAL_MXS_AUART_CONSOLE
-	memcpy(&auart_port[pdev->id], s, sizeof(struct mxs_auart_port));
-#endif
-
 	ret = uart_add_one_port(&auart_driver, &s->port);
 	if (ret)
 		goto out_free_clk;