diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Kconfig | 72 | ||||
| -rw-r--r-- | drivers/serial/atmel_serial.c | 5 | ||||
| -rw-r--r-- | drivers/serial/bfin_5xx.c | 638 | ||||
| -rw-r--r-- | drivers/serial/of_serial.c | 1 | ||||
| -rw-r--r-- | drivers/serial/samsung.c | 4 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 102 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 153 |
7 files changed, 474 insertions, 501 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index ec3c214598d0..c1df7676a73d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -776,24 +776,7 @@ config BFIN_UART0_CTSRTS bool "Enable UART0 hardware flow control" depends on SERIAL_BFIN_UART0 help - Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS - signal. - -config UART0_CTS_PIN - int "UART0 CTS pin" - depends on BFIN_UART0_CTSRTS && !BF548 - default 23 - help - The default pin is GPIO_GP7. - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. - -config UART0_RTS_PIN - int "UART0 RTS pin" - depends on BFIN_UART0_CTSRTS && !BF548 - default 22 - help - The default pin is GPIO_GP6. - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. + Enable hardware flow control in the driver. config SERIAL_BFIN_UART1 bool "Enable UART1" @@ -805,22 +788,7 @@ config BFIN_UART1_CTSRTS bool "Enable UART1 hardware flow control" depends on SERIAL_BFIN_UART1 help - Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS - signal. - -config UART1_CTS_PIN - int "UART1 CTS pin" - depends on BFIN_UART1_CTSRTS && !BF548 - default -1 - help - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. - -config UART1_RTS_PIN - int "UART1 RTS pin" - depends on BFIN_UART1_CTSRTS && !BF548 - default -1 - help - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. + Enable hardware flow control in the driver. config SERIAL_BFIN_UART2 bool "Enable UART2" @@ -832,22 +800,7 @@ config BFIN_UART2_CTSRTS bool "Enable UART2 hardware flow control" depends on SERIAL_BFIN_UART2 help - Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS - signal. - -config UART2_CTS_PIN - int "UART2 CTS pin" - depends on BFIN_UART2_CTSRTS && !BF548 - default -1 - help - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. - -config UART2_RTS_PIN - int "UART2 RTS pin" - depends on BFIN_UART2_CTSRTS && !BF548 - default -1 - help - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. + Enable hardware flow control in the driver. config SERIAL_BFIN_UART3 bool "Enable UART3" @@ -859,22 +812,7 @@ config BFIN_UART3_CTSRTS bool "Enable UART3 hardware flow control" depends on SERIAL_BFIN_UART3 help - Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS - signal. - -config UART3_CTS_PIN - int "UART3 CTS pin" - depends on BFIN_UART3_CTSRTS && !BF548 - default -1 - help - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. - -config UART3_RTS_PIN - int "UART3 RTS pin" - depends on BFIN_UART3_CTSRTS && !BF548 - default -1 - help - Refer to arch/blackfin/mach-*/include/mach/gpio.h to see the GPIO map. + Enable hardware flow control in the driver. config SERIAL_IMX bool "IMX serial port support" @@ -1412,7 +1350,7 @@ config SERIAL_NETX_CONSOLE config SERIAL_OF_PLATFORM tristate "Serial port on Open Firmware platform bus" - depends on PPC_OF || MICROBLAZE + depends on OF depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL help If you have a PowerPC based system that has serial ports diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3892666b5fbd..2a1d52fb4936 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1732,6 +1732,11 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); + if (port->rs485.flags & SER_RS485_ENABLED) { + UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL); + UART_PUT_CR(&port->uart, ATMEL_US_RTSEN); + } + return 0; err_add_port: diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 19cac9f610fd..e381b895b04d 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -1,7 +1,7 @@ /* * Blackfin On-Chip Serial Driver * - * Copyright 2006-2008 Analog Devices Inc. + * Copyright 2006-2010 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -12,6 +12,9 @@ #define SUPPORT_SYSRQ #endif +#define DRIVER_NAME "bfin-uart" +#define pr_fmt(fmt) DRIVER_NAME ": " fmt + #include <linux/module.h> #include <linux/ioport.h> #include <linux/gfp.h> @@ -23,21 +26,20 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial_core.h> -#include <linux/dma-mapping.h> - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) +#include <linux/gpio.h> +#include <linux/irq.h> #include <linux/kgdb.h> -#include <asm/irq_regs.h> -#endif - -#include <asm/gpio.h> -#include <mach/bfin_serial_5xx.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/irq.h> +#include <asm/portmux.h> #include <asm/cacheflush.h> +#include <asm/dma.h> + +#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) +#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) +#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) +#include <asm/bfin_serial.h> #ifdef CONFIG_SERIAL_BFIN_MODULE # undef CONFIG_EARLY_PRINTK @@ -48,12 +50,11 @@ #endif /* UART name and device definitions */ -#define BFIN_SERIAL_NAME "ttyBF" +#define BFIN_SERIAL_DEV_NAME "ttyBF" #define BFIN_SERIAL_MAJOR 204 #define BFIN_SERIAL_MINOR 64 -static struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; -static int nr_active_ports = ARRAY_SIZE(bfin_serial_resource); +static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) @@ -743,14 +744,14 @@ static int bfin_serial_startup(struct uart_port *port) } } if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); gpio_direction_output(uart->rts_pin, 0); } #endif #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (request_irq(uart->status_irq, + if (uart->cts_pin >= 0 && request_irq(uart->status_irq, bfin_serial_mctrl_cts_int, IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { + uart->cts_pin = -1; pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); } @@ -796,11 +797,9 @@ static void bfin_serial_shutdown(struct uart_port *port) #ifdef CONFIG_SERIAL_BFIN_CTSRTS if (uart->cts_pin >= 0) free_irq(gpio_to_irq(uart->cts_pin), uart); - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); #endif #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (UART_GET_IER(uart) & EDSSI) + if (uart->cts_pin >= 0) free_irq(uart->status_irq, uart); #endif } @@ -962,33 +961,33 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) */ static void bfin_serial_set_ldisc(struct uart_port *port, int ld) { - int line = port->line; + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; unsigned short val; switch (ld) { case N_IRDA: - val = UART_GET_GCTL(&bfin_serial_ports[line]); + val = UART_GET_GCTL(uart); val |= (IREN | RPOLC); - UART_PUT_GCTL(&bfin_serial_ports[line], val); + UART_PUT_GCTL(uart, val); break; default: - val = UART_GET_GCTL(&bfin_serial_ports[line]); + val = UART_GET_GCTL(uart); val &= ~(IREN | RPOLC); - UART_PUT_GCTL(&bfin_serial_ports[line], val); + UART_PUT_GCTL(uart, val); } } static void bfin_serial_reset_irda(struct uart_port *port) { - int line = port->line; + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; unsigned short val; - val = UART_GET_GCTL(&bfin_serial_ports[line]); + val = UART_GET_GCTL(uart); val &= ~(IREN | RPOLC); - UART_PUT_GCTL(&bfin_serial_ports[line], val); + UART_PUT_GCTL(uart, val); SSYNC(); val |= (IREN | RPOLC); - UART_PUT_GCTL(&bfin_serial_ports[line], val); + UART_PUT_GCTL(uart, val); SSYNC(); } @@ -1070,85 +1069,6 @@ static struct uart_ops bfin_serial_pops = { #endif }; -static void __init bfin_serial_hw_init(void) -{ -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART1 - peripheral_request(P_UART1_TX, DRIVER_NAME); - peripheral_request(P_UART1_RX, DRIVER_NAME); - -# if defined(CONFIG_BFIN_UART1_CTSRTS) && defined(CONFIG_BF54x) - peripheral_request(P_UART1_RTS, DRIVER_NAME); - peripheral_request(P_UART1_CTS, DRIVER_NAME); -# endif -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART2 - peripheral_request(P_UART2_TX, DRIVER_NAME); - peripheral_request(P_UART2_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_UART3 - peripheral_request(P_UART3_TX, DRIVER_NAME); - peripheral_request(P_UART3_RX, DRIVER_NAME); - -# if defined(CONFIG_BFIN_UART3_CTSRTS) && defined(CONFIG_BF54x) - peripheral_request(P_UART3_RTS, DRIVER_NAME); - peripheral_request(P_UART3_CTS, DRIVER_NAME); -# endif -#endif -} - -static void __init bfin_serial_init_ports(void) -{ - static int first = 1; - int i; - - if (!first) - return; - first = 0; - - bfin_serial_hw_init(); - - for (i = 0; i < nr_active_ports; i++) { - spin_lock_init(&bfin_serial_ports[i].port.lock); - bfin_serial_ports[i].port.uartclk = get_sclk(); - bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE; - bfin_serial_ports[i].port.ops = &bfin_serial_pops; - bfin_serial_ports[i].port.line = i; - bfin_serial_ports[i].port.iotype = UPIO_MEM; - bfin_serial_ports[i].port.membase = - (void __iomem *)bfin_serial_resource[i].uart_base_addr; - bfin_serial_ports[i].port.mapbase = - bfin_serial_resource[i].uart_base_addr; - bfin_serial_ports[i].port.irq = - bfin_serial_resource[i].uart_irq; - bfin_serial_ports[i].status_irq = - bfin_serial_resource[i].uart_status_irq; - bfin_serial_ports[i].port.flags = UPF_BOOT_AUTOCONF; -#ifdef CONFIG_SERIAL_BFIN_DMA - bfin_serial_ports[i].tx_done = 1; - bfin_serial_ports[i].tx_count = 0; - bfin_serial_ports[i].tx_dma_channel = - bfin_serial_resource[i].uart_tx_dma_channel; - bfin_serial_ports[i].rx_dma_channel = - bfin_serial_resource[i].uart_rx_dma_channel; - init_timer(&(bfin_serial_ports[i].rx_dma_timer)); -#endif -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) - bfin_serial_ports[i].cts_pin = - bfin_serial_resource[i].uart_cts_pin; - bfin_serial_ports[i].rts_pin = - bfin_serial_resource[i].uart_rts_pin; -#endif - } -} - #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) /* * If the port was already initialised (eg, by a boot loader), @@ -1196,6 +1116,34 @@ bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, static struct uart_driver bfin_serial_reg; +static void bfin_serial_console_putchar(struct uart_port *port, int ch) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); +} + +#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || + defined (CONFIG_EARLY_PRINTK) */ + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +#define CLASS_BFIN_CONSOLE "bfin-console" +/* + * Interrupts are disabled on entering + */ +static void +bfin_serial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct bfin_serial_port *uart = bfin_serial_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + +} + static int __init bfin_serial_console_setup(struct console *co, char *options) { @@ -1215,9 +1163,12 @@ bfin_serial_console_setup(struct console *co, char *options) * if so, search for the first available port that does have * console support. */ - if (co->index == -1 || co->index >= nr_active_ports) - co->index = 0; - uart = &bfin_serial_ports[co->index]; + if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) + return -ENODEV; + + uart = bfin_serial_ports[co->index]; + if (!uart) + return -ENODEV; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1226,36 +1177,9 @@ bfin_serial_console_setup(struct console *co, char *options) return uart_set_options(&uart->port, co, baud, parity, bits, flow); } -#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || - defined (CONFIG_EARLY_PRINTK) */ - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); - SSYNC(); -} - -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} static struct console bfin_serial_console = { - .name = BFIN_SERIAL_NAME, + .name = BFIN_SERIAL_DEV_NAME, .write = bfin_serial_console_write, .device = uart_console_device, .setup = bfin_serial_console_setup, @@ -1263,44 +1187,30 @@ static struct console bfin_serial_console = { .index = -1, .data = &bfin_serial_reg, }; - -static int __init bfin_serial_rs_console_init(void) -{ - bfin_serial_init_ports(); - register_console(&bfin_serial_console); - - return 0; -} -console_initcall(bfin_serial_rs_console_init); - #define BFIN_SERIAL_CONSOLE &bfin_serial_console #else #define BFIN_SERIAL_CONSOLE NULL #endif /* CONFIG_SERIAL_BFIN_CONSOLE */ +#ifdef CONFIG_EARLY_PRINTK +static struct bfin_serial_port bfin_earlyprintk_port; +#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" -#ifdef CONFIG_EARLY_PRINTK -static __init void early_serial_putc(struct uart_port *port, int ch) +/* + * Interrupts are disabled on entering + */ +static void +bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) { - unsigned timeout = 0xffff; - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - while ((!(UART_GET_LSR(uart) & THRE)) && --timeout) - cpu_relax(); - UART_PUT_CHAR(uart, ch); -} + unsigned long flags; -static __init void early_serial_write(struct console *con, const char *s, - unsigned int n) -{ - struct bfin_serial_port *uart = &bfin_serial_ports[con->index]; - unsigned int i; + if (bfin_earlyprintk_port.port.line != co->index) + return; - for (i = 0; i < n; i++, s++) { - if (*s == '\n') - early_serial_putc(&uart->port, '\r'); - early_serial_putc(&uart->port, *s); - } + spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); + uart_console_write(&bfin_earlyprintk_port.port, s, count, + bfin_serial_console_putchar); + spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); } /* @@ -1311,113 +1221,204 @@ static __init void early_serial_write(struct console *con, const char *s, */ static struct __initdata console bfin_early_serial_console = { .name = "early_BFuart", - .write = early_serial_write, + .write = bfin_earlyprintk_console_write, .device = uart_console_device, .flags = CON_PRINTBUFFER, .index = -1, .data = &bfin_serial_reg, }; - -struct console __init *bfin_earlyserial_init(unsigned int port, - unsigned int cflag) -{ - struct bfin_serial_port *uart; - struct ktermios t; - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - /* - * If we are using early serial, don't let the normal console rewind - * log buffer, since that causes things to be printed multiple times - */ - bfin_serial_console.flags &= ~CON_PRINTBUFFER; #endif - if (port == -1 || port >= nr_active_ports) - port = 0; - bfin_serial_init_ports(); - bfin_early_serial_console.index = port; - uart = &bfin_serial_ports[port]; - t.c_cflag = cflag; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = port; - bfin_serial_set_termios(&uart->port, &t, &t); - return &bfin_early_serial_console; -} - -#endif /* CONFIG_EARLY_PRINTK */ - static struct uart_driver bfin_serial_reg = { .owner = THIS_MODULE, - .driver_name = "bfin-uart", - .dev_name = BFIN_SERIAL_NAME, + .driver_name = DRIVER_NAME, + .dev_name = BFIN_SERIAL_DEV_NAME, .major = BFIN_SERIAL_MAJOR, .minor = BFIN_SERIAL_MINOR, .nr = BFIN_UART_NR_PORTS, .cons = BFIN_SERIAL_CONSOLE, }; -static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state) +static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) { - int i; + struct bfin_serial_port *uart = platform_get_drvdata(pdev); - for (i = 0; i < nr_active_ports; i++) { - if (bfin_serial_ports[i].port.dev != &dev->dev) - continue; - uart_suspend_port(&bfin_serial_reg, &bfin_serial_ports[i].port); - } + return uart_suspend_port(&bfin_serial_reg, &uart->port); +} - return 0; +static int bfin_serial_resume(struct platform_device *pdev) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + return uart_resume_port(&bfin_serial_reg, &uart->port); } -static int bfin_serial_resume(struct platform_device *dev) +static int bfin_serial_probe(struct platform_device *pdev) { - int i; + struct resource *res; + struct bfin_serial_port *uart = NULL; + int ret = 0; - for (i = 0; i < nr_active_ports; i++) { - if (bfin_serial_ports[i].port.dev != &dev->dev) - continue; - uart_resume_port(&bfin_serial_reg, &bfin_serial_ports[i].port); + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); + return -ENOENT; } - return 0; -} + if (bfin_serial_ports[pdev->id] == NULL) { -static int bfin_serial_probe(struct platform_device *dev) -{ - struct resource *res = dev->resource; - int i; + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + dev_err(&pdev->dev, + "fail to malloc bfin_serial_port\n"); + return -ENOMEM; + } + bfin_serial_ports[pdev->id] = uart; - for (i = 0; i < dev->num_resources; i++, res++) - if (res->flags & IORESOURCE_MEM) - break; +#ifdef CONFIG_EARLY_PRINTK + if (!(bfin_earlyprintk_port.port.membase + && bfin_earlyprintk_port.port.line == pdev->id)) { + /* + * If the peripheral PINs of current port is allocated + * in earlyprintk probe stage, don't do it again. + */ +#endif + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + goto out_error_free_mem; + } +#ifdef CONFIG_EARLY_PRINTK + } +#endif + + spin_lock_init(&uart->port.lock); + uart->port.uartclk = get_sclk(); + uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; + uart->port.ops = &bfin_serial_pops; + uart->port.line = pdev->id; + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + uart->port.membase = ioremap(res->start, + res->end - res->start); + if (!uart->port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + uart->port.mapbase = res->start; - if (i < dev->num_resources) { - for (i = 0; i < nr_active_ports; i++, res++) { - if (bfin_serial_ports[i].port.mapbase != res->start) - continue; - bfin_serial_ports[i].port.dev = &dev->dev; - uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port); + uart->port.irq = platform_get_irq(pdev, 0); + if (uart->port.irq < 0) { + dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; } + + uart->status_irq = platform_get_irq(pdev, 1); + if (uart->status_irq < 0) { + dev_err(&pdev->dev, "No uart status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + +#ifdef CONFIG_SERIAL_BFIN_DMA + uart->tx_done = 1; + uart->tx_count = 0; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->tx_dma_channel = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->rx_dma_channel = res->start; + + init_timer(&(uart->rx_dma_timer)); +#endif + +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) + uart->cts_pin = -1; + else + uart->cts_pin = res->start; + + res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (res == NULL) + uart->rts_pin = -1; + else + uart->rts_pin = res->start; +# if defined(CONFIG_SERIAL_BFIN_CTSRTS) + if (uart->rts_pin >= 0) + gpio_request(uart->rts_pin, DRIVER_NAME); +# endif +#endif } - return 0; +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + uart = bfin_serial_ports[pdev->id]; + uart->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, uart); + ret = uart_add_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + } +#endif + + if (!ret) + return 0; + + if (uart) { +out_error_unmap: + iounmap(uart->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; + } + + return ret; } -static int bfin_serial_remove(struct platform_device *dev) +static int __devexit bfin_serial_remove(struct platform_device *pdev) { - int i; - - for (i = 0; i < nr_active_ports; i++) { - if (bfin_serial_ports[i].port.dev != &dev->dev) - continue; - uart_remove_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port); - bfin_serial_ports[i].port.dev = NULL; -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) - gpio_free(bfin_serial_ports[i].cts_pin); - gpio_free(bfin_serial_ports[i].rts_pin); + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + dev_set_drvdata(&pdev->dev, NULL); + + if (uart) { + uart_remove_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->rts_pin >= 0) + gpio_free(uart->rts_pin); #endif + iounmap(uart->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; } return 0; @@ -1425,31 +1426,160 @@ static int bfin_serial_remove(struct platform_device *dev) static struct platform_driver bfin_serial_driver = { .probe = bfin_serial_probe, - .remove = bfin_serial_remove, + .remove = __devexit_p(bfin_serial_remove), .suspend = bfin_serial_suspend, .resume = bfin_serial_resume, .driver = { - .name = "bfin-uart", + .name = DRIVER_NAME, .owner = THIS_MODULE, }, }; -static int __init bfin_serial_init(void) +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) +static __initdata struct early_platform_driver early_bfin_serial_driver = { + .class_str = CLASS_BFIN_CONSOLE, + .pdrv = &bfin_serial_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init bfin_serial_rs_console_init(void) +{ + early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); + + early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); + + register_console(&bfin_serial_console); + + return 0; +} +console_initcall(bfin_serial_rs_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +/* + * Memory can't be allocated dynamically during earlyprink init stage. + * So, do individual probe for earlyprink with a static uart port variable. + */ +static int bfin_earlyprintk_probe(struct platform_device *pdev) { + struct resource *res; int ret; - pr_info("Serial: Blackfin serial driver\n"); + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); + return -ENOENT; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + bfin_earlyprintk_port.port.membase = ioremap(res->start, + res->end - res->start); + if (!bfin_earlyprintk_port.port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + bfin_earlyprintk_port.port.mapbase = res->start; + bfin_earlyprintk_port.port.line = pdev->id; + bfin_earlyprintk_port.port.uartclk = get_sclk(); + bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; + spin_lock_init(&bfin_earlyprintk_port.port.lock); + + return 0; + +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + + return ret; +} + +static struct platform_driver bfin_earlyprintk_driver = { + .probe = bfin_earlyprintk_probe, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { + .class_str = CLASS_BFIN_EARLYPRINTK, + .pdrv = &bfin_earlyprintk_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +struct console __init *bfin_earlyserial_init(unsigned int port, + unsigned int cflag) +{ + struct ktermios t; + char port_name[20]; - bfin_serial_init_ports(); + if (port < 0 || port >= BFIN_UART_NR_PORTS) + return NULL; + + /* + * Only probe resource of the given port in earlyprintk boot arg. + * The expected port id should be indicated in port name string. + */ + snprintf(port_name, 20, DRIVER_NAME ".%d", port); + early_platform_driver_register(&early_bfin_earlyprintk_driver, + port_name); + early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); + + if (!bfin_earlyprintk_port.port.membase) + return NULL; + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + /* + * If we are using early serial, don't let the normal console rewind + * log buffer, since that causes things to be printed multiple times + */ + bfin_serial_console.flags &= ~CON_PRINTBUFFER; +#endif + + bfin_early_serial_console.index = port; + t.c_cflag = cflag; + t.c_iflag = 0; + t.c_oflag = 0; + t.c_lflag = ICANON; + t.c_line = port; + bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); + + return &bfin_early_serial_console; +} +#endif /* CONFIG_EARLY_PRINTK */ + +static int __init bfin_serial_init(void) +{ + int ret; + + pr_info("Blackfin serial driver\n"); ret = uart_register_driver(&bfin_serial_reg); - if (ret == 0) { - ret = platform_driver_register(&bfin_serial_driver); - if (ret) { - pr_debug("uart register failed\n"); - uart_unregister_driver(&bfin_serial_reg); - } + if (ret) { + pr_err("failed to register %s:%d\n", + bfin_serial_reg.driver_name, ret); + } + + ret = platform_driver_register(&bfin_serial_driver); + if (ret) { + pr_err("fail to register bfin uart\n"); + uart_unregister_driver(&bfin_serial_reg); } + return ret; } @@ -1463,7 +1593,7 @@ static void __exit bfin_serial_exit(void) module_init(bfin_serial_init); module_exit(bfin_serial_exit); -MODULE_AUTHOR("Aubrey.Li <aubrey.li@analog.com>"); +MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); MODULE_DESCRIPTION("Blackfin generic serial port driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index 17849dcb9adc..5c7abe4c94dd 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -15,6 +15,7 @@ #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/nwpserial.h> diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 7ac2bf5167cd..2335edafe903 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -883,10 +883,10 @@ static struct uart_ops s3c24xx_serial_ops = { static struct uart_driver s3c24xx_uart_drv = { .owner = THIS_MODULE, - .dev_name = "s3c2410_serial", + .driver_name = "s3c2410_serial", .nr = CONFIG_SERIAL_SAMSUNG_UARTS, .cons = S3C24XX_SERIAL_CONSOLE, - .driver_name = S3C24XX_SERIAL_NAME, + .dev_name = S3C24XX_SERIAL_NAME, .major = S3C24XX_SERIAL_MAJOR, .minor = S3C24XX_SERIAL_MINOR, }; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index c291b3add1d2..92c91c83edde 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -3,7 +3,7 @@ * * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO) * - * Copyright (C) 2002 - 2008 Paul Mundt + * Copyright (C) 2002 - 2011 Paul Mundt * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007). * * based off of the old drivers/char/sh-sci.c by: @@ -81,14 +81,22 @@ struct sci_port { struct timer_list break_timer; int break_flag; + /* SCSCR initialization */ + unsigned int scscr; + + /* SCBRR calculation algo */ + unsigned int scbrr_algo_id; + /* Interface clock */ struct clk *iclk; /* Function clock */ struct clk *fclk; struct list_head node; + struct dma_chan *chan_tx; struct dma_chan *chan_rx; + #ifdef CONFIG_SERIAL_SH_SCI_DMA struct device *dma_dev; unsigned int slave_tx; @@ -415,9 +423,9 @@ static void sci_transmit_chars(struct uart_port *port) if (!(status & SCxSR_TDxE(port))) { ctrl = sci_in(port, SCSCR); if (uart_circ_empty(xmit)) - ctrl &= ~SCI_CTRL_FLAGS_TIE; + ctrl &= ~SCSCR_TIE; else - ctrl |= SCI_CTRL_FLAGS_TIE; + ctrl |= SCSCR_TIE; sci_out(port, SCSCR, ctrl); return; } @@ -459,7 +467,7 @@ static void sci_transmit_chars(struct uart_port *port) sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } - ctrl |= SCI_CTRL_FLAGS_TIE; + ctrl |= SCSCR_TIE; sci_out(port, SCSCR, ctrl); } } @@ -708,7 +716,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr) disable_irq_nosync(irq); scr |= 0x4000; } else { - scr &= ~SCI_CTRL_FLAGS_RIE; + scr &= ~SCSCR_RIE; } sci_out(port, SCSCR, scr); /* Clear current interrupt */ @@ -777,6 +785,18 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) return IRQ_HANDLED; } +static inline unsigned long port_rx_irq_mask(struct uart_port *port) +{ + /* + * Not all ports (such as SCIFA) will support REIE. Rather than + * special-casing the port type, we check the port initialization + * IRQ enable mask to see whether the IRQ is desired at all. If + * it's unset, it's logically inferred that there's no point in + * testing for it. + */ + return SCSCR_RIE | (to_sci_port(port)->scscr & SCSCR_REIE); +} + static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { unsigned short ssr_status, scr_status, err_enabled; @@ -786,22 +806,25 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) ssr_status = sci_in(port, SCxSR); scr_status = sci_in(port, SCSCR); - err_enabled = scr_status & (SCI_CTRL_FLAGS_REIE | SCI_CTRL_FLAGS_RIE); + err_enabled = scr_status & port_rx_irq_mask(port); /* Tx Interrupt */ - if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCI_CTRL_FLAGS_TIE) && + if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) && !s->chan_tx) ret = sci_tx_interrupt(irq, ptr); + /* * Rx Interrupt: if we're using DMA, the DMA controller clears RDF / * DR flags */ if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) && - (scr_status & SCI_CTRL_FLAGS_RIE)) + (scr_status & SCSCR_RIE)) ret = sci_rx_interrupt(irq, ptr); + /* Error Interrupt */ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled) ret = sci_er_interrupt(irq, ptr); + /* Break Interrupt */ if ((ssr_status & SCxSR_BRK(port)) && err_enabled) ret = sci_br_interrupt(irq, ptr); @@ -951,7 +974,7 @@ static void sci_dma_tx_complete(void *arg) schedule_work(&s->work_tx); } else if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) { u16 ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl & ~SCI_CTRL_FLAGS_TIE); + sci_out(port, SCSCR, ctrl & ~SCSCR_TIE); } spin_unlock_irqrestore(&port->lock, flags); @@ -1214,14 +1237,16 @@ static void sci_start_tx(struct uart_port *port) if (new != scr) sci_out(port, SCSCR, new); } + if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) && s->cookie_tx < 0) schedule_work(&s->work_tx); #endif + if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) { /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); - sci_out(port, SCSCR, ctrl | SCI_CTRL_FLAGS_TIE); + sci_out(port, SCSCR, ctrl | SCSCR_TIE); } } @@ -1231,20 +1256,24 @@ static void sci_stop_tx(struct uart_port *port) /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) ctrl &= ~0x8000; - ctrl &= ~SCI_CTRL_FLAGS_TIE; + + ctrl &= ~SCSCR_TIE; + sci_out(port, SCSCR, ctrl); } static void sci_start_rx(struct uart_port *port) { - unsigned short ctrl = SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE; + unsigned short ctrl; + + ctrl = sci_in(port, SCSCR) | port_rx_irq_mask(port); - /* Set RIE (Receive Interrupt Enable) bit in SCSCR */ - ctrl |= sci_in(port, SCSCR); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) ctrl &= ~0x4000; + sci_out(port, SCSCR, ctrl); } @@ -1252,11 +1281,13 @@ static void sci_stop_rx(struct uart_port *port) { unsigned short ctrl; - /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */ ctrl = sci_in(port, SCSCR); + if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) ctrl &= ~0x4000; - ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE); + + ctrl &= ~port_rx_irq_mask(port); + sci_out(port, SCSCR, ctrl); } @@ -1296,7 +1327,7 @@ static void rx_timer_fn(unsigned long arg) scr &= ~0x4000; enable_irq(s->irqs[1]); } - sci_out(port, SCSCR, scr | SCI_CTRL_FLAGS_RIE); + sci_out(port, SCSCR, scr | SCSCR_RIE); dev_dbg(port->dev, "DMA Rx timed out\n"); schedule_work(&s->work_rx); } @@ -1442,12 +1473,31 @@ static void sci_shutdown(struct uart_port *port) s->disable(port); } +static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, + unsigned long freq) +{ + switch (algo_id) { + case SCBRR_ALGO_1: + return ((freq + 16 * bps) / (16 * bps) - 1); + case SCBRR_ALGO_2: + return ((freq + 16 * bps) / (32 * bps) - 1); + case SCBRR_ALGO_3: + return (((freq * 2) + 16 * bps) / (16 * bps) - 1); + case SCBRR_ALGO_4: + return (((freq * 2) + 16 * bps) / (32 * bps) - 1); + case SCBRR_ALGO_5: + return (((freq * 1000 / 32) / bps) - 1); + } + + /* Warn, but use a safe default */ + WARN_ON(1); + return ((freq + 16 * bps) / (32 * bps) - 1); +} + static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { -#ifdef CONFIG_SERIAL_SH_SCI_DMA struct sci_port *s = to_sci_port(port); -#endif unsigned int status, baud, smr_val, max_baud; int t = -1; u16 scfcr = 0; @@ -1464,7 +1514,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, max_baud); if (likely(baud && port->uartclk)) - t = SCBRR_VALUE(baud, port->uartclk); + t = sci_scbrr_calc(s->scbrr_algo_id, baud, port->uartclk); do { status = sci_in(port, SCxSR); @@ -1490,7 +1540,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSMR, smr_val); dev_dbg(port->dev, "%s: SMR %x, t %x, SCSCR %x\n", __func__, smr_val, t, - SCSCR_INIT(port)); + s->scscr); if (t > 0) { if (t >= 256) { @@ -1506,7 +1556,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_init_pins(port, termios->c_cflag); sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); - sci_out(port, SCSCR, SCSCR_INIT(port)); + sci_out(port, SCSCR, s->scscr); #ifdef CONFIG_SERIAL_SH_SCI_DMA /* @@ -1679,9 +1729,11 @@ static int __devinit sci_init_single(struct platform_device *dev, port->mapbase = p->mapbase; port->membase = p->membase; - port->irq = p->irqs[SCIx_TXI_IRQ]; - port->flags = p->flags; - sci_port->type = port->type = p->type; + port->irq = p->irqs[SCIx_TXI_IRQ]; + port->flags = p->flags; + sci_port->type = port->type = p->type; + sci_port->scscr = p->scscr; + sci_port->scbrr_algo_id = p->scbrr_algo_id; #ifdef CONFIG_SERIAL_SH_SCI_DMA sci_port->dma_dev = p->dma_dev; diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 4bc614e4221c..b223d6cbf33a 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -15,27 +15,17 @@ defined(CONFIG_CPU_SUBTYPE_SH7709) # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCIF0 0xA4400000 # define SCIF2 0xA4410000 -# define SCSMR_Ir 0xA44A0000 -# define IRDA_SCIF SCIF0 # define SCPCR 0xA4000116 # define SCPDR 0xA4000136 - -/* Set the clock source, - * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input - * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output - */ -# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_ARCH_SH73A0) || \ defined(CONFIG_ARCH_SH7367) || \ defined(CONFIG_ARCH_SH7377) || \ defined(CONFIG_ARCH_SH7372) -# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define PORT_PTCR 0xA405011EUL # define PORT_PVCR 0xA4050122UL # define SCIF_ORER 0x0200 /* overrun error bit */ @@ -43,7 +33,6 @@ # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ @@ -53,39 +42,31 @@ # define SCSPTR1 0xffe0001c /* 8 bit SCI */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ # define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 -# define SCSCR_INIT(port) 0x3B #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ # define SCSPTR1 0xffe10010 /* 16 bit SCIF */ # define SCSPTR2 0xffe20010 /* 16 bit SCIF */ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PADR 0xA4050120 # define PSDR 0xA405013e # define PWDR 0xA4050166 # define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7723) # define SCSPTR0 0xa4050160 # define SCSPTR1 0xa405013e @@ -94,62 +75,38 @@ # define SCSPTR4 0xa4050128 # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7724) # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \ - 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ - 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) -# define SCIF_BASE_ADDR 0x01030000 -# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR # define SCIF_PTR2_OFFS 0x0000020 -# define SCIF_LSR2_OFFS 0x0000024 # define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ -# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_H8S2678) -# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7757) # define SCSPTR0 0xfe4b0020 # define SCSPTR1 0xfe4b0020 # define SCSPTR2 0xfe4b0020 # define SCIF_ORER 0x0001 -# define SCSCR_INIT(port) 0x38 # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe08024 /* 16 bit SCIF */ # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ # define SCSPTR1 0xff924020 /* 16 bit SCIF */ # define SCSPTR2 0xff925020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ - -#if defined(CONFIG_SH_SH2007) -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=0 */ -# define SCSCR_INIT(port) 0x38 -#else -/* TIE=0,RIE=0,TE=1,RE=1,REIE=1,CKE1=1 */ -# define SCSCR_INIT(port) 0x3a -#endif - #elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SH7786) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ @@ -159,7 +116,6 @@ # define SCSPTR4 0xffee0024 /* 16 bit SCIF */ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ @@ -174,52 +130,21 @@ # define SCSPTR6 0xfffeB020 /* 16 bit SCIF */ # define SCSPTR7 0xfffeB820 /* 16 bit SCIF */ # endif -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ # define SCSPTR1 0xf8410020 /* 16 bit SCIF */ # define SCSPTR2 0xf8420020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ # define SCSPTR1 0xffc40020 /* 16 bit SCIF */ # define SCSPTR2 0xffc50020 /* 16 bit SCIF */ # define SCSPTR3 0xffc60020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ -# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #else # error CPU subtype not defined #endif -/* SCSCR */ -#define SCI_CTRL_FLAGS_TIE 0x80 /* all */ -#define SCI_CTRL_FLAGS_RIE 0x40 /* all */ -#define SCI_CTRL_FLAGS_TE 0x20 /* all */ -#define SCI_CTRL_FLAGS_RE 0x10 /* all */ -#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7722) || \ - defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) || \ - defined(CONFIG_CPU_SUBTYPE_SHX3) -#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7724) -#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8) -#else -#define SCI_CTRL_FLAGS_REIE 0 -#endif -/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ -/* SCI_CTRL_FLAGS_CKE1 0x02 * all */ -/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */ - /* SCxSR SCI */ #define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ #define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */ @@ -300,23 +225,11 @@ /* SCFCR */ #define SCFCR_RFRST 0x0002 #define SCFCR_TFRST 0x0004 -#define SCFCR_TCRST 0x4000 #define SCFCR_MCE 0x0008 #define SCI_MAJOR 204 #define SCI_MINOR_START 8 -/* Generic serial flags */ -#define SCI_RX_THROTTLE 0x0000001 - -#define SCI_MAGIC 0xbabeface - -/* - * Events are used to schedule things to happen at timer-interrupt - * time, instead of at rs interrupt time. - */ -#define SCI_EVENT_WRITE_WAKEUP 0 - #define SCI_IN(size, offset) \ if ((size) == 8) { \ return ioread8(port->membase + (offset)); \ @@ -445,8 +358,6 @@ SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) SCIF_FNS(SCSCR, 0x08, 16) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCxSR, 0x14, 16) SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) @@ -476,8 +387,6 @@ SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) SCIx_FNS(SCSPTR, 0, 0, 0, 0) -SCIF_FNS(SCTDSR, 0x0c, 8) -SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCFCR, 0x18, 16) SCIF_FNS(SCFDR, 0x1c, 16) SCIF_FNS(SCLSR, 0x24, 16) @@ -503,7 +412,6 @@ SCIF_FNS(SCLSR, 0, 0, 0x28, 16) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) -SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) @@ -597,64 +505,3 @@ static inline int sci_rxd_in(struct uart_port *port) return 1; } #endif - -/* - * Values for the BitRate Register (SCBRR) - * - * The values are actually divisors for a frequency which can - * be internal to the SH3 (14.7456MHz) or derived from an external - * clock source. This driver assumes the internal clock is used; - * to support using an external clock source, config options or - * possibly command-line options would need to be added. - * - * Also, to support speeds below 2400 (why?) the lower 2 bits of - * the SCSMR register would also need to be set to non-zero values. - * - * -- Greg Banks 27Feb2000 - * - * Answer: The SCBRR register is only eight bits, and the value in - * it gets larger with lower baud rates. At around 2400 (depending on - * the peripherial module clock) you run out of bits. However the - * lower two bits of SCSMR allow the module clock to be divided down, - * scaling the value which is needed in SCBRR. - * - * -- Stuart Menefy - 23 May 2000 - * - * I meant, why would anyone bother with bitrates below 2400. - * - * -- Greg Banks - 7Jul2000 - * - * You "speedist"! How will I use my 110bps ASR-33 teletype with paper - * tape reader as a console! - * - * -- Mitch Davis - 15 Jul 2000 - */ - -#if (defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7785) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786)) && \ - !defined(CONFIG_SH_SH2007) -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7367) || \ - defined(CONFIG_ARCH_SH7377) || \ - defined(CONFIG_ARCH_SH7372) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) -#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\ - defined(CONFIG_CPU_SUBTYPE_SH7724) -static inline int scbrr_calc(struct uart_port *port, int bps, int clk) -{ - if (port->type == PORT_SCIF) - return (clk+16*bps)/(32*bps)-1; - else - return ((clk*2)+16*bps)/(16*bps)-1; -} -#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk) -#elif defined(__H8300H__) || defined(__H8300S__) -#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#else /* Generic SH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) -#endif |