diff options
Diffstat (limited to 'drivers/staging/brcm80211/include/brcmu_wifi.h')
| -rw-r--r-- | drivers/staging/brcm80211/include/brcmu_wifi.h | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/drivers/staging/brcm80211/include/brcmu_wifi.h b/drivers/staging/brcm80211/include/brcmu_wifi.h new file mode 100644 index 000000000000..fde592bd9177 --- /dev/null +++ b/drivers/staging/brcm80211/include/brcmu_wifi.h @@ -0,0 +1,243 @@ +/* + * Copyright (c) 2010 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _BRCMU_WIFI_H_ +#define _BRCMU_WIFI_H_ + +#include <linux/if_ether.h> /* for ETH_ALEN */ +#include <linux/ieee80211.h> /* for WLAN_PMKID_LEN */ + +/* A chanspec holds the channel number, band, bandwidth and control sideband */ +typedef u16 chanspec_t; + +/* channel defines */ +#define CH_UPPER_SB 0x01 +#define CH_LOWER_SB 0x02 +#define CH_EWA_VALID 0x04 +#define CH_20MHZ_APART 4 +#define CH_10MHZ_APART 2 +#define CH_5MHZ_APART 1 /* 2G band channels are 5 Mhz apart */ +#define CH_MAX_2G_CHANNEL 14 /* Max channel in 2G band */ +#define BRCM_MAX_2G_CHANNEL CH_MAX_2G_CHANNEL /* legacy define */ +#define MAXCHANNEL 224 /* max # supported channels. The max channel no is 216, + * this is that + 1 rounded up to a multiple of NBBY (8). + * DO NOT MAKE it > 255: channels are u8's all over + */ + +#define WL_CHANSPEC_CHAN_MASK 0x00ff +#define WL_CHANSPEC_CHAN_SHIFT 0 + +#define WL_CHANSPEC_CTL_SB_MASK 0x0300 +#define WL_CHANSPEC_CTL_SB_SHIFT 8 +#define WL_CHANSPEC_CTL_SB_LOWER 0x0100 +#define WL_CHANSPEC_CTL_SB_UPPER 0x0200 +#define WL_CHANSPEC_CTL_SB_NONE 0x0300 + +#define WL_CHANSPEC_BW_MASK 0x0C00 +#define WL_CHANSPEC_BW_SHIFT 10 +#define WL_CHANSPEC_BW_10 0x0400 +#define WL_CHANSPEC_BW_20 0x0800 +#define WL_CHANSPEC_BW_40 0x0C00 + +#define WL_CHANSPEC_BAND_MASK 0xf000 +#define WL_CHANSPEC_BAND_SHIFT 12 +#define WL_CHANSPEC_BAND_5G 0x1000 +#define WL_CHANSPEC_BAND_2G 0x2000 +#define INVCHANSPEC 255 + +/* used to calculate the chan_freq = chan_factor * 500Mhz + 5 * chan_number */ +#define WF_CHAN_FACTOR_2_4_G 4814 /* 2.4 GHz band, 2407 MHz */ +#define WF_CHAN_FACTOR_5_G 10000 /* 5 GHz band, 5000 MHz */ +#define WF_CHAN_FACTOR_4_G 8000 /* 4.9 GHz band for Japan */ + +/* channel defines */ +#define LOWER_20_SB(channel) (((channel) > CH_10MHZ_APART) ? ((channel) - CH_10MHZ_APART) : 0) +#define UPPER_20_SB(channel) (((channel) < (MAXCHANNEL - CH_10MHZ_APART)) ? \ + ((channel) + CH_10MHZ_APART) : 0) +#define CHSPEC_BANDUNIT(chspec) (CHSPEC_IS5G(chspec) ? BAND_5G_INDEX : \ + BAND_2G_INDEX) +#define CH20MHZ_CHSPEC(channel) (chanspec_t)((chanspec_t)(channel) | WL_CHANSPEC_BW_20 | \ + WL_CHANSPEC_CTL_SB_NONE | (((channel) <= CH_MAX_2G_CHANNEL) ? \ + WL_CHANSPEC_BAND_2G : WL_CHANSPEC_BAND_5G)) +#define NEXT_20MHZ_CHAN(channel) (((channel) < (MAXCHANNEL - CH_20MHZ_APART)) ? \ + ((channel) + CH_20MHZ_APART) : 0) +#define CH40MHZ_CHSPEC(channel, ctlsb) (chanspec_t) \ + ((channel) | (ctlsb) | WL_CHANSPEC_BW_40 | \ + ((channel) <= CH_MAX_2G_CHANNEL ? WL_CHANSPEC_BAND_2G : \ + WL_CHANSPEC_BAND_5G)) +#define CHSPEC_CHANNEL(chspec) ((u8)((chspec) & WL_CHANSPEC_CHAN_MASK)) +#define CHSPEC_BAND(chspec) ((chspec) & WL_CHANSPEC_BAND_MASK) + +#ifdef WL11N_20MHZONLY + +#define CHSPEC_CTL_SB(chspec) WL_CHANSPEC_CTL_SB_NONE +#define CHSPEC_BW(chspec) WL_CHANSPEC_BW_20 +#define CHSPEC_IS10(chspec) 0 +#define CHSPEC_IS20(chspec) 1 +#ifndef CHSPEC_IS40 +#define CHSPEC_IS40(chspec) 0 +#endif + +#else /* !WL11N_20MHZONLY */ + +#define CHSPEC_CTL_SB(chspec) ((chspec) & WL_CHANSPEC_CTL_SB_MASK) +#define CHSPEC_BW(chspec) ((chspec) & WL_CHANSPEC_BW_MASK) +#define CHSPEC_IS10(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_10) +#define CHSPEC_IS20(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_20) +#ifndef CHSPEC_IS40 +#define CHSPEC_IS40(chspec) (((chspec) & WL_CHANSPEC_BW_MASK) == WL_CHANSPEC_BW_40) +#endif + +#endif /* !WL11N_20MHZONLY */ + +#define CHSPEC_IS5G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_5G) +#define CHSPEC_IS2G(chspec) (((chspec) & WL_CHANSPEC_BAND_MASK) == WL_CHANSPEC_BAND_2G) +#define CHSPEC_SB_NONE(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_NONE) +#define CHSPEC_SB_UPPER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_UPPER) +#define CHSPEC_SB_LOWER(chspec) (((chspec) & WL_CHANSPEC_CTL_SB_MASK) == WL_CHANSPEC_CTL_SB_LOWER) +#define CHSPEC_CTL_CHAN(chspec) ((CHSPEC_SB_LOWER(chspec)) ? \ + (LOWER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK))) : \ + (UPPER_20_SB(((chspec) & WL_CHANSPEC_CHAN_MASK)))) +#define CHSPEC2BAND(chspec) (CHSPEC_IS5G(chspec) ? BRCM_BAND_5G : BRCM_BAND_2G) + +#define CHANSPEC_STR_LEN 8 + +/* defined rate in 500kbps */ +#define BRCM_MAXRATE 108 /* in 500kbps units */ +#define BRCM_RATE_1M 2 /* in 500kbps units */ +#define BRCM_RATE_2M 4 /* in 500kbps units */ +#define BRCM_RATE_5M5 11 /* in 500kbps units */ +#define BRCM_RATE_11M 22 /* in 500kbps units */ +#define BRCM_RATE_6M 12 /* in 500kbps units */ +#define BRCM_RATE_9M 18 /* in 500kbps units */ +#define BRCM_RATE_12M 24 /* in 500kbps units */ +#define BRCM_RATE_18M 36 /* in 500kbps units */ +#define BRCM_RATE_24M 48 /* in 500kbps units */ +#define BRCM_RATE_36M 72 /* in 500kbps units */ +#define BRCM_RATE_48M 96 /* in 500kbps units */ +#define BRCM_RATE_54M 108 /* in 500kbps units */ + +#define BRCM_2G_25MHZ_OFFSET 5 /* 2.4GHz band channel offset */ + +#define MCSSET_LEN 16 + +#define AC_BITMAP_TST(ab, ac) (((ab) & (1 << (ac))) != 0) + +/* + * Verify the chanspec is using a legal set of parameters, i.e. that the + * chanspec specified a band, bw, ctl_sb and channel and that the + * combination could be legal given any set of circumstances. + * RETURNS: true is the chanspec is malformed, false if it looks good. + */ +extern bool brcmu_chspec_malformed(chanspec_t chanspec); + +/* + * This function returns the channel number that control traffic is being sent on, for legacy + * channels this is just the channel number, for 40MHZ channels it is the upper or lowre 20MHZ + * sideband depending on the chanspec selected + */ +extern u8 brcmu_chspec_ctlchan(chanspec_t chspec); + +/* + * Return the channel number for a given frequency and base frequency. + * The returned channel number is relative to the given base frequency. + * If the given base frequency is zero, a base frequency of 5 GHz is assumed for + * frequencies from 5 - 6 GHz, and 2.407 GHz is assumed for 2.4 - 2.5 GHz. + * + * Frequency is specified in MHz. + * The base frequency is specified as (start_factor * 500 kHz). + * Constants WF_CHAN_FACTOR_2_4_G, WF_CHAN_FACTOR_5_G are defined for + * 2.4 GHz and 5 GHz bands. + * + * The returned channel will be in the range [1, 14] in the 2.4 GHz band + * and [0, 200] otherwise. + * -1 is returned if the start_factor is WF_CHAN_FACTOR_2_4_G and the + * frequency is not a 2.4 GHz channel, or if the frequency is not and even + * multiple of 5 MHz from the base frequency to the base plus 1 GHz. + * + * Reference 802.11 REVma, section 17.3.8.3, and 802.11B section 18.4.6.2 + */ +extern int brcmu_mhz2channel(uint freq, uint start_factor); + +/* Enumerate crypto algorithms */ +#define CRYPTO_ALGO_OFF 0 +#define CRYPTO_ALGO_WEP1 1 +#define CRYPTO_ALGO_TKIP 2 +#define CRYPTO_ALGO_WEP128 3 +#define CRYPTO_ALGO_AES_CCM 4 +#define CRYPTO_ALGO_AES_RESERVED1 5 +#define CRYPTO_ALGO_AES_RESERVED2 6 +#define CRYPTO_ALGO_NALG 7 + +/* wireless security bitvec */ +#define WEP_ENABLED 0x0001 +#define TKIP_ENABLED 0x0002 +#define AES_ENABLED 0x0004 +#define WSEC_SWFLAG 0x0008 +#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */ + +/* WPA authentication mode bitvec */ +#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */ +#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */ +#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */ +#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */ +#define WPA_AUTH_RESERVED1 0x0008 +#define WPA_AUTH_RESERVED2 0x0010 + /* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */ +#define WPA2_AUTH_RESERVED1 0x0020 +#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */ +#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */ +#define WPA2_AUTH_RESERVED3 0x0200 +#define WPA2_AUTH_RESERVED4 0x0400 +#define WPA2_AUTH_RESERVED5 0x0800 + +/* pmkid */ +#define MAXPMKID 16 + +#define DOT11_DEFAULT_RTS_LEN 2347 +#define DOT11_DEFAULT_FRAG_LEN 2346 + +#define DOT11_ICV_AES_LEN 8 +#define DOT11_QOS_LEN 2 +#define DOT11_IV_MAX_LEN 8 +#define DOT11_A4_HDR_LEN 30 + +#define HT_CAP_RX_STBC_NO 0x0 +#define HT_CAP_RX_STBC_ONE_STREAM 0x1 + +typedef struct _pmkid { + u8 BSSID[ETH_ALEN]; + u8 PMKID[WLAN_PMKID_LEN]; +} pmkid_t; + +typedef struct _pmkid_list { + u32 npmkid; + pmkid_t pmkid[1]; +} pmkid_list_t; + +typedef struct _pmkid_cand { + u8 BSSID[ETH_ALEN]; + u8 preauth; +} pmkid_cand_t; + +typedef struct _pmkid_cand_list { + u32 npmkid_cand; + pmkid_cand_t pmkid_cand[1]; +} pmkid_cand_list_t; + +typedef u8 ac_bitmap_t; + +#endif /* _BRCMU_WIFI_H_ */ |