diff options
Diffstat (limited to 'drivers/staging/comedi/Kconfig')
| -rw-r--r-- | drivers/staging/comedi/Kconfig | 1284 |
1 files changed, 1276 insertions, 8 deletions
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index d63c889ce557..8ce307e64b58 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1,7 +1,7 @@ config COMEDI tristate "Data acquisition support (comedi)" default N - depends on m && (PCI || PCMCIA || PCCARD || USB) + depends on m ---help--- Enable support a wide range of data acquisition devices for Linux. @@ -9,27 +9,1295 @@ config COMEDI config COMEDI_DEBUG bool "Comedi debugging" depends on COMEDI != n - help + ---help--- This is an option for use by developers; most people should say N here. This enables comedi core and driver debugging. -config COMEDI_PCI_DRIVERS +menuconfig COMEDI_MISC_DRIVERS + tristate "Comedi misc drivers" + depends on COMEDI + default N + ---help--- + Enable comedi misc drivers to be built + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about misc non-hardware comedi drivers. + +if COMEDI_MISC_DRIVERS + +config COMEDI_KCOMEDILIB + tristate "Comedi kcomedilib" + ---help--- + Build the kcomedilib + +config COMEDI_BOND + tristate "Device bonding support" + depends on COMEDI_KCOMEDILIB + default N + ---help--- + Enable support for a driver to 'bond' (merge) multiple subdevices + from multiple devices together as one. + + To compile this driver as a module, choose M here: the module will be + called comedi_bond. + +config COMEDI_TEST + tristate "Fake waveform generator support" + select COMEDI_FC + default N + ---help--- + Enable support for the fake waveform generator. + This driver is mainly for testing purposes, but can also be used to + generate sample waveforms on systems that don't have data acquisition + hardware. + + To compile this driver as a module, choose M here: the module will be + called comedi_test. + +config COMEDI_PARPORT + tristate "Parallel port support" + default N + ---help--- + Enable support for the standard parallel port. + A cheap and easy way to get a few more digital I/O lines. Steal + additional parallel ports from old computers or your neighbors' + computers. + + To compile this driver as a module, choose M here: the module will be + called comedi_parport. + +config COMEDI_SERIAL2002 + tristate "Driver for serial connected hardware" + default N + ---help--- + Enable support for serial connected hardware + + To compile this driver as a module, choose M here: the module will be + called serial2002. + +config COMEDI_SKEL + tristate "Comedi skeleton driver" + default N + ---help--- + Build the Skeleton driver, an example for driver writers + + To compile this driver as a module, choose M here: the module will be + called skel. + +endif # COMEDI_MISC_DRIVERS + +menuconfig COMEDI_ISA_DRIVERS + tristate "Comedi ISA and PC/104 drivers" + depends on COMEDI && ISA + default N + ---help--- + Enable comedi ISA and PC/104 drivers to be built + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about ISA and PC/104 comedi drivers. + +if COMEDI_ISA_DRIVERS && ISA + +config COMEDI_8255 + tristate "Generic 8255 support" + default N + ---help--- + Enable generic 8255 support. + + To compile this driver as a module, choose M here: the module will be + called 8255. + +config COMEDI_ACL7225B + tristate "ADlink NuDAQ ACL-7225b and compatibles support" + default N + ---help--- + Enable support for ADlink NuDAQ ACL-7225b and compatibles, + ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio) + + To compile this driver as a module, choose M here: the module will be + called acl7225b. + +config COMEDI_PCL711 + tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support" + default N + ---help--- + Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112 + + To compile this driver as a module, choose M here: the module will be + called pcl711. + +config COMEDI_PCL724 + tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO" + default N + ---help--- + Enable support for Advantech PCL-724, PCL-722, PCL-731 and + ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards + + To compile this driver as a module, choose M here: the module will be + called pcl724. + +config COMEDI_PCL725 + tristate "Advantech PCL-725 and compatible ISA card support" + default N + ---help--- + Enable support for Advantech PCL-725 and compatible ISA cards. + + To compile this driver as a module, choose M here: the module will be + called pcl725. + +config COMEDI_PCL726 + tristate "Advantech PCL-726 and compatible ISA card support" + default N + ---help--- + Enable support for Advantech PCL-726 and compatible ISA cards. + + To compile this driver as a module, choose M here: the module will be + called pcl726. + +config COMEDI_PCL730 + tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support" + default N + ---help--- + Enable support for Advantech PCL-730, ICP ISO-730 and ADlink + ACL-7130 ISA cards + + To compile this driver as a module, choose M here: the module will be + called pcl730. + +config COMEDI_PCL812 + tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216" + default N + ---help--- + Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink + ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA, + A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards + + To compile this driver as a module, choose M here: the module will be + called pcl812. + +config COMEDI_PCL816 + tristate "Advantech PCL-814 and PCL-816 ISA card support" + default N + ---help--- + Enable support for Advantech PCL-814 and PCL-816 ISA cards + + To compile this driver as a module, choose M here: the module will be + called pcl816. + +config COMEDI_PCL818 + tristate "Advantech PCL-718 and PCL-818 ISA card support" + default N + ---help--- + Enable support for Advantech PCL-818 ISA cards + PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718 + + To compile this driver as a module, choose M here: the module will be + called pcl818. + +config COMEDI_PCM3724 + tristate "Advantech PCM-3724 PC/104 card support" + default N + ---help--- + Enable support for Advantech PCM-3724 PC/104 cards. + + To compile this driver as a module, choose M here: the module will be + called pcm3724. + +config COMEDI_PCM3730 + tristate "Advantech PCM-3730 and clone PC/104 board support" + default N + ---help--- + Enable support for Advantech PCM-3730 and clone PC/104 boards + + To compile this driver as a module, choose M here: the module will be + called pcm3730. + +config COMEDI_RTI800 + tristate "Analog Devices RTI-800/815 ISA card support" + default N + ---help--- + Enable support for Analog Devices RTI-800/815 ISA cards + + To compile this driver as a module, choose M here: the module will be + called rti800. + +config COMEDI_RTI802 + tristate "Analog Devices RTI-802 ISA card support" + default N + ---help--- + Enable support for Analog Devices RTI-802 ISA cards + + To compile this driver as a module, choose M here: the module will be + called rti802. + +config COMEDI_DAS08 + tristate "DAS-08 compatible ISA, PC/104 and PCMCIA card support" + default N + ---help--- + Enable support for Keithley Metrabyte/ComputerBoards DAS08 + and compatible ISA and PC/104 cards + + To compile this driver as a module, choose M here: the module will be + called das08. + +config COMEDI_DAS16M1 + tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support" + select COMEDI_FC + default N + ---help--- + Enable support for Measurement Computing CIO-DAS16/M1 ISA cards. + + To compile this driver as a module, choose M here: the module will be + called das16m1. + +config COMEDI_DAS16 + tristate "DAS-16 compatible ISA and PC/104 card support" + select COMEDI_FC + default N + ---help--- + Enable support for Keithley Metrabyte/ComputerBoards DAS16 + and compatible ISA and PC/104 cards: + Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202, + DAS-1401, DAS-1402, DAS-1601, DAS-1602 and + ComputerBoards/MeasurementComputing PC104-DAS16/JR/, + PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12, + CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12, + CIO-DAS1602/16, CIO-DAS16/330 + + To compile this driver as a module, choose M here: the module will be + called das16. + +config COMEDI_DAS800 + tristate "DAS800 and compatible ISA card support" + select COMEDI_FC + default N + ---help--- + Enable support for Keithley Metrabyte DAS800 and compatible ISA cards + Keithley Metrabyte DAS-800, DAS-801, DAS-802 + Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and + CIO-DAS802/16 + + To compile this driver as a module, choose M here: the module will be + called das800. + +config COMEDI_DAS1800 + tristate "DAS1800 and compatible ISA card support" + select COMEDI_FC + default N + ---help--- + Enable support for DAS1800 and compatible ISA cards + Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO, + DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO, + DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST, + DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and + DAS-1802AO + + To compile this driver as a module, choose M here: the module will be + called das1800. + +config COMEDI_DAS6402 + tristate "DAS6402 and compatible ISA card support" + default N + ---help--- + Enable support for DAS6402 and compatible ISA cards + Computerboards, Keithley Metrabyte DAS6402 and compatibles + + To compile this driver as a module, choose M here: the module will be + called das6402. + +config COMEDI_DT2801 + tristate "Data Translation DT2801 ISA card support" + default N + ---help--- + Enable support for Data Translation DT2801 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2801. + +config COMEDI_DT2811 + tristate "Data Translation DT2811 ISA card support" + default N + ---help--- + Enable support for Data Translation DT2811 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2811. + +config COMEDI_DT2814 + tristate "Data Translation DT2814 ISA card support" + default N + ---help--- + Enable support for Data Translation DT2814 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2814. + +config COMEDI_DT2815 + tristate "Data Translation DT2815 ISA card support" + default N + ---help--- + Enable support for Data Translation DT2815 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2815. + +config COMEDI_DT2817 + tristate "Data Translation DT2817 ISA card support" + default N + ---help--- + Enable support for Data Translation DT2817 ISA cards + + To compile this driver as a module, choose M here: the module will be + called dt2817. + +config COMEDI_DT282X + tristate "Data Translation DT2821 series and DT-EZ ISA card support" + select COMEDI_FC + default N + ---help--- + Enable support for Data Translation DT2821 series including DT-EZ + DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI, + DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828, + DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL + + To compile this driver as a module, choose M here: the module will be + called dt282x. + +config COMEDI_DMM32AT + tristate "Diamond Systems MM-32-AT PC/104 board support" + default N + ---help--- + Enable support for Diamond Systems MM-32-AT PC/104 boards + + To compile this driver as a module, choose M here: the module will be + called dmm32at. + +config COMEDI_FL512 + tristate "FL512 ISA card support" + default N + ---help--- + Enable support for FL512 ISA card + + To compile this driver as a module, choose M here: the module will be + called fl512. + +config COMEDI_AIO_AIO12_8 + tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support" + default N + ---help--- + Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board + + To compile this driver as a module, choose M here: the module will be + called aio_aio12_8. + +config COMEDI_AIO_IIRO_16 + tristate "I/O Products PC/104 IIRO16 Board support" + default N + ---help--- + Enable support for I/O Products PC/104 IIRO16 Relay And Isolated + Input Board + + To compile this driver as a module, choose M here: the module will be + called aio_iiro_16. + +config COMEDI_C6XDIGIO + tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support" + default N + ---help--- + Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter + card + + To compile this driver as a module, choose M here: the module will be + called c6xdigio. + +config COMEDI_MPC624 + tristate "Micro/sys MPC-624 PC/104 board support" + default N + ---help--- + Enable support for Micro/sys MPC-624 PC/104 board + + To compile this driver as a module, choose M here: the module will be + called mpc624. + +config COMEDI_ADQ12B + tristate "MicroAxial ADQ12-B data acquisition and control card support" + default N + ---help--- + Enable MicroAxial ADQ12-B daq and control card support. + + To compile this driver as a module, choose M here: the module will be + called adq12b. + +config COMEDI_NI_AT_A2150 + tristate "NI AT-A2150 ISA card support" + depends on COMEDI_NI_COMMON + default N + ---help--- + Enable support for National Instruments AT-A2150 cards + + To compile this driver as a module, choose M here: the module will be + called ni_at_a2150. + +config COMEDI_NI_AT_AO + tristate "NI AT-AO-6/10 EISA card support" + depends on COMEDI_NI_COMMON + default N + ---help--- + Enable support for National Instruments AT-AO-6/10 cards + + To compile this driver as a module, choose M here: the module will be + called ni_at_ao. + +config COMEDI_NI_ATMIO + tristate "NI AT-MIO E series ISA-PNP card support" + depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON + default N + ---help--- + Enable support for National Instruments AT-MIO E series cards + National Instruments AT-MIO-16E-1 (ni_atmio), + AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, + AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 + + To compile this driver as a module, choose M here: the module will be + called ni_atmio. + +config COMEDI_NI_ATMIO16D + tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support" + depends on ISAPNP && COMEDI_NI_COMMON + default N + ---help--- + Enable support for National Instruments AT-MIO16/AT-MIO16D cards. + + To compile this driver as a module, choose M here: the module will be + called ni_atmio16d. + +config COMEDI_PCMAD + tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support" + default N + ---help--- + Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards. + + To compile this driver as a module, choose M here: the module will be + called pcmad. + +config COMEDI_PCMDA12 + tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support" + default N + ---help--- + Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards. + Note that the board is not ISA-PNP capable and thus needs the I/O + port comedi_config parameter. + + To compile this driver as a module, choose M here: the module will be + called pcmda12. + +config COMEDI_PCMMIO + tristate "Winsystems PCM-MIO PC/104 board support" + default N + ---help--- + Enable support for Winsystems PCM-MIO multifunction PC/104 boards. + + To compile this driver as a module, choose M here: the module will be + called pcmmio. + +config COMEDI_PCMUIO + tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support" + default N + ---help--- + Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards. + + To compile this driver as a module, choose M here: the module will be + called pcmuio. + +config COMEDI_MULTIQ3 + tristate "Quanser Consulting MultiQ-3 ISA card support" + default N + ---help--- + Enable support for Quanser Consulting MultiQ-3 ISA cards + + To compile this driver as a module, choose M here: the module will be + called multiq3. + +config COMEDI_POC + tristate "Generic driver for very simple devices" + default N + ---help--- + Enable generic support for very simple / POC (Piece of Crap) boards, + Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and + PCL-734 (pcl734) + + To compile this driver as a module, choose M here: the module will be + called poc. + +endif # COMEDI_ISA_DRIVERS + +menuconfig COMEDI_PCI_DRIVERS tristate "Comedi PCI drivers" depends on COMEDI && PCI default N ---help--- - Enable lots of comedi PCI drivers to be built + Enable comedi PCI drivers to be built + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about PCI comedi drivers. + +if COMEDI_PCI_DRIVERS && PCI + +config COMEDI_ADDI_APCI_035 + tristate "ADDI-DATA APCI_035 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_035 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_035. + +config COMEDI_ADDI_APCI_1032 + tristate "ADDI-DATA APCI_1032 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_1032 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1032. + +config COMEDI_ADDI_APCI_1500 + tristate "ADDI-DATA APCI_1500 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_1500 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1500. + +config COMEDI_ADDI_APCI_1516 + tristate "ADDI-DATA APCI_1516 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_1516 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1516. + +config COMEDI_ADDI_APCI_1564 + tristate "ADDI-DATA APCI_1564 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_1564 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_1564. + +config COMEDI_ADDI_APCI_16XX + tristate "ADDI-DATA APCI_16xx support" + default N + ---help--- + Enable support for ADDI-DATA APCI_16xx cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_16xx. + +config COMEDI_ADDI_APCI_2016 + tristate "ADDI-DATA APCI_2016 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_2016 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_2016. + +config COMEDI_ADDI_APCI_2032 + tristate "ADDI-DATA APCI_2032 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_2032 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_2032. + +config COMEDI_ADDI_APCI_2200 + tristate "ADDI-DATA APCI_2200 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_2200 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_2200. + +config COMEDI_ADDI_APCI_3001 + tristate "ADDI-DATA APCI_3001 support" + select COMEDI_FC + default N + ---help--- + Enable support for ADDI-DATA APCI_3001 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_3001. + +config COMEDI_ADDI_APCI_3120 + tristate "ADDI-DATA APCI_3520 support" + select COMEDI_FC + default N + ---help--- + Enable support for ADDI-DATA APCI_3520 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_3120. + +config COMEDI_ADDI_APCI_3501 + tristate "ADDI-DATA APCI_3501 support" + default N + ---help--- + Enable support for ADDI-DATA APCI_3501 cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_3501. + +config COMEDI_ADDI_APCI_3XXX + tristate "ADDI-DATA APCI_3xxx support" + default N + ---help--- + Enable support for ADDI-DATA APCI_3xxx cards + + To compile this driver as a module, choose M here: the module will be + called addi_apci_3xxx. + +config COMEDI_ADL_PCI6208 + tristate "ADLink PCI-6208A support" + default N + ---help--- + Enable support for ADLink PCI-6208A cards + + To compile this driver as a module, choose M here: the module will be + called adl_pci6208. + +config COMEDI_ADL_PCI7230 + tristate "ADLink PCI-7230 digital io board support" + default N + ---help--- + Enable support for ADlink PCI-7230 digital io board support + + To compile this driver as a module, choose M here: the module will be + called adl_pci7230. + +config COMEDI_ADL_PCI7296 + tristate "ADLink PCI-7296 96 ch. digital io board support" + default N + ---help--- + Enable support for ADlink PCI-7296 96 ch. digital io board support + + To compile this driver as a module, choose M here: the module will be + called adl_pci7296. + +config COMEDI_ADL_PCI7432 + tristate "ADLink PCI-7432 64 ch. isolated digital io board support" + default N + ---help--- + Enable support for ADlink PCI-7432 64 ch. isolated digital io board + + To compile this driver as a module, choose M here: the module will be + called adl_pci7432. + +config COMEDI_ADL_PCI8164 + tristate "ADLink PCI-8164 4 Axes Motion Control board support" + default N + ---help--- + Enable support for ADlink PCI-8164 4 Axes Motion Control board + + To compile this driver as a module, choose M here: the module will be + called adl_pci8164. + +config COMEDI_ADL_PCI9111 + tristate "ADLink PCI-9111HR support" + select COMEDI_FC + default N + ---help--- + Enable support for ADlink PCI9111 cards + + To compile this driver as a module, choose M here: the module will be + called adl_pci9111. + +config COMEDI_ADL_PCI9118 + tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support" + select COMEDI_FC + default N + ---help--- + Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards + + To compile this driver as a module, choose M here: the module will be + called adl_pci9118. + +config COMEDI_ADV_PCI1710 + tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support" + default N + ---help--- + Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711, + PCI-1713, PCI-1720 and PCI-1731 + + To compile this driver as a module, choose M here: the module will be + called adv_pci1710. + +config COMEDI_ADV_PCI1723 + tristate "Advantech PCI-1723 support" + default N + ---help--- + Enable support for Advantech PCI-1723 cards + + To compile this driver as a module, choose M here: the module will be + called adv_pci1723. + +config COMEDI_ADV_PCI_DIO + tristate "Advantech PCI DIO card support" + default N + ---help--- + Enable support for Advantech PCI DIO cards + PCI-1730, PCI-1733, PCI-1734, PCI-1736UP, PCI-1750, PCI-1751, + PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and PCI-1762 + + To compile this driver as a module, choose M here: the module will be + called adv_pci_dio. + +config COMEDI_AMPLC_DIO200 + tristate "Amplicon PC272E and PCI272 DIO board support" + default N + ---help--- + Enable support for Amplicon PC272E and PCI272 DIO boards + + To compile this driver as a module, choose M here: the module will be + called amplc_dio200. + +config COMEDI_AMPLC_PC236 + tristate "Amplicon PC36AT and PCI236 DIO board support" + default N + ---help--- + Enable support for Amplicon PC36AT and PCI236 DIO boards + + To compile this driver as a module, choose M here: the module will be + called amplc_pc236. + +config COMEDI_AMPLC_PC263 + tristate "Amplicon PC263 and PCI263 relay board support" + default N + ---help--- + Enable support for Amplicon PC263 and PCI263 relay boards + + To compile this driver as a module, choose M here: the module will be + called amplc_pc263. + +config COMEDI_AMPLC_PCI224 + tristate "Amplicon PCI224 and PCI234 support" + select COMEDI_FC + default N + ---help--- + Enable support for Amplicon PCI224 and PCI234 AO boards + + To compile this driver as a module, choose M here: the module will be + called amplc_pci224. + +config COMEDI_AMPLC_PCI230 + tristate "Amplicon PCI230 and PCI260 support" + default N + ---help--- + Enable support for Amplicon PCI230 and PCI260 Multifunction I/O + boards + + To compile this driver as a module, choose M here: the module will be + called amplc_pci230. + +config COMEDI_CONTEC_PCI_DIO + tristate "Contec PIO1616L digital I/O board support" + default N + ---help--- + Enable support for the Contec PIO1616L digital I/O board + + To compile this driver as a module, choose M here: the module will be + called contec_pci_dio. + +config COMEDI_DT3000 + tristate "Data Translation DT3000 series support" + default N + ---help--- + Enable support for Data Translation DT3000 series + DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and + DT3004-200 + + To compile this driver as a module, choose M here: the module will be + called dt3000. + +config COMEDI_UNIOXX5 + tristate "Fastwel UNIOxx-5 analog and digital io board support" + default N + ---help--- + Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards + + To compile this driver as a module, choose M here: the module will be + called unioxx5. + +config COMEDI_GSC_HPDI + tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support" + select COMEDI_FC + default N + ---help--- + Enable support for General Standards Corporation high speed parallel + digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32. + Only receive mode works, transmit not supported. + + To compile this driver as a module, choose M here: the module will be + called gsc_hpdi. + +config COMEDI_ICP_MULTI + tristate "Inova ICP_MULTI support" + default N + ---help--- + Enable support for Inova ICP_MULTI card + + To compile this driver as a module, choose M here: the module will be + called icp_multi. + +config COMEDI_II_PCI20KC + tristate "Intelligent Instruments PCI-20001C carrier support" + default N + ---help--- + Enable support for Intelligent Instruments PCI-20001C carrier + PCI-20001, PCI-20006 and PCI-20341 + + To compile this driver as a module, choose M here: the module will be + called ii_pci20kc. + +config COMEDI_DAQBOARD2000 + tristate "IOtech DAQboard/2000 support" + default N + ---help--- + Enable support for the IOtech DAQboard/2000 + + To compile this driver as a module, choose M here: the module will be + called daqboard2000. + +config COMEDI_JR3_PCI + tristate "JR3/PCI force sensor board support" + default N + ---help--- + Enable support for JR3/PCI force sensor boards + + To compile this driver as a module, choose M here: the module will be + called jr3_pci. + +config COMEDI_KE_COUNTER + tristate "Kolter-Electronic PCI Counter 1 card support" + default N + ---help--- + Enable support for Kolter-Electronic PCI Counter 1 cards + + To compile this driver as a module, choose M here: the module will be + called ke_counter. + +config COMEDI_CB_PCIDAS64 + tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support" + select COMEDI_FC + default N + ---help--- + Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx, + 60xx, and 4020 series with the PLX 9080 PCI controller + + To compile this driver as a module, choose M here: the module will be + called cb_pcidas64. + +config COMEDI_CB_PCIDAS + tristate "MeasurementComputing PCI-DAS support" + select COMEDI_FC + default N + ---help--- + Enable support for ComputerBoards/MeasurementComputing PCI-DAS with + AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr, + PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001 + and PCI_DAS1002. + + To compile this driver as a module, choose M here: the module will be + called cb_pcidas. + +config COMEDI_CB_PCIDDA + tristate "MeasurementComputing PCI-DDA series support" + default N + ---help--- + Enable support for ComputerBoards/MeasurementComputing PCI-DDA + series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16, + PCI-DDA04/16 and PCI-DDA02/16 + + To compile this driver as a module, choose M here: the module will be + called cb_pcidda. + +config COMEDI_CB_PCIDIO + tristate "MeasurementComputing PCI-DIO series support" + default N + ---help--- + Enable support for ComputerBoards/MeasurementComputing PCI-DIO series + PCI-DIO24, PCI-DIO24H and PCI-DIO48H + + To compile this driver as a module, choose M here: the module will be + called cb_pcidio. + +config COMEDI_CB_PCIMDAS + tristate "MeasurementComputing PCIM-DAS1602/16 support" + default N + ---help--- + Enable support for ComputerBoards/MeasurementComputing PCI Migration + series PCIM-DAS1602/16 + + To compile this driver as a module, choose M here: the module will be + called cb_pcimdas. -config COMEDI_PCMCIA_DRIVERS +config COMEDI_CB_PCIMDDA + tristate "MeasurementComputing PCIM-DDA06-16 support" + default N + ---help--- + Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16 + + To compile this driver as a module, choose M here: the module will be + called cb_pcimdda. + +config COMEDI_ME4000 + tristate "Meilhaus ME-4000 support" + default N + ---help--- + Enable support for Meilhaus PCI data acquisition cards + ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is + + To compile this driver as a module, choose M here: the module will be + called me4000. + +config COMEDI_ME_DAQ + tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support" + default N + ---help--- + Enable support for Meilhaus PCI data acquisition cards + ME-2000i, ME-2600i and ME-3000vm1 + + To compile this driver as a module, choose M here: the module will be + called me_daq. + +config COMEDI_NI_6527 + tristate "NI 6527 support" + depends on COMEDI_MITE + default N + ---help--- + Enable support for the National Instruments 6527 PCI card + + To compile this driver as a module, choose M here: the module will be + called ni_6527. + +config COMEDI_NI_65XX + tristate "NI 65xx static dio PCI card support" + depends on COMEDI_MITE + default N + ---help--- + Enable support for National Instruments 65xx static dio boards. + Supported devices: National Instruments PCI-6509 (ni_65xx), + PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513, + PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517, + PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528 + + To compile this driver as a module, choose M here: the module will be + called ni_65xx. + +config COMEDI_NI_660X + tristate "NI 660x counter/timer PCI card support" + depends on COMEDI_NI_TIO && COMEDI_NI_COMMON + default N + ---help--- + Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, + PXI-6602 and PXI-6608. + + To compile this driver as a module, choose M here: the module will be + called ni_660x. + +config COMEDI_NI_670X + tristate "NI 670x PCI card support" + depends on COMEDI_MITE + default N + ---help--- + Enable support for National Instruments PCI-6703 and PCI-6704 + + To compile this driver as a module, choose M here: the module will be + called ni_670x. + +config COMEDI_NI_PCIDIO + tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support" + depends on COMEDI_MITE + default N + ---help--- + Enable support for National Instruments PCI-DIO-32HS, PXI-6533, + PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X, + PXI-6503, PCI-6533 and PCI-6534 + The DIO-96 appears as four 8255 subdevices. See the 8255 + driver notes for details. + + To compile this driver as a module, choose M here: the module will be + called ni_pcidio. + +config COMEDI_NI_PCIMIO + tristate "NI PCI-MIO-E series and M series support" + depends on COMEDI_NI_TIO && COMEDI_NI_COMMON + default N + ---help--- + Enable support for National Instruments PCI-MIO-E series and M series + (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, + PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E, + PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E, + PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111, + PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229, + PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259, + PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711, + PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E, + PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143 + + To compile this driver as a module, choose M here: the module will be + called ni_pcimio. + +config COMEDI_RTD520 + tristate "Real Time Devices PCI4520/DM7520 support" + default N + ---help--- + Enable support for Real Time Devices PCI4520/DM7520 + + To compile this driver as a module, choose M here: the module will be + called rtd520. + +config COMEDI_S526 + tristate "Sensoray s526 support" + default N + ---help--- + Enable support for Sensoray s526 + + To compile this driver as a module, choose M here: the module will be + called s526. + +config COMEDI_S626 + tristate "Sensoray 626 support" + select COMEDI_FC + default N + ---help--- + Enable support for Sensoray 626 + + To compile this driver as a module, choose M here: the module will be + called s626. + +config COMEDI_SSV_DNP + tristate "SSV Embedded Systems DIL/Net-PC support" + default N + ---help--- + Enable support for SSV Embedded Systems DIL/Net-PC + + To compile this driver as a module, choose M here: the module will be + called ssv_dnp. + +endif # COMEDI_PCI_DRIVERS + +menuconfig COMEDI_PCMCIA_DRIVERS tristate "Comedi PCMCIA drivers" depends on COMEDI && PCMCIA && PCCARD default N ---help--- - Enable lots of comedi PCMCIA and PCCARD drivers to be built + Enable comedi PCMCIA and PCCARD drivers to be built + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about PCMCIA comedi drivers. + +if COMEDI_PCMCIA_DRIVERS && PCMCIA + +config COMEDI_CB_DAS16_CS + tristate "CB DAS16 series PCMCIA support" + default N + ---help--- + Enable support for the ComputerBoards/MeasurementComputing PCMCIA + cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16 + + To compile this driver as a module, choose M here: the module will be + called cb_das16_cs. + +config COMEDI_DAS08_CS + tristate "CB DAS08 PCMCIA support" + select COMEDI_DAS08 + default N + ---help--- + Enable support for the ComputerBoards/MeasurementComputing DAS-08 + PCMCIA card + + To compile this driver as a module, choose M here: the module will be + called das08_cs. -config COMEDI_USB_DRIVERS +config COMEDI_NI_DAQ_700_CS + tristate "NI DAQCard-700 PCMCIA support" + depends on COMEDI_NI_COMMON + default N + ---help--- + Enable support for the National Instruments PCMCIA DAQCard-700 DIO + + To compile this driver as a module, choose M here: the module will be + called ni_daq_700. + +config COMEDI_NI_DAQ_DIO24_CS + tristate "NI DAQ-Card DIO-24 PCMCIA support" + depends on COMEDI_NI_COMMON + default N + ---help--- + Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 + + To compile this driver as a module, choose M here: the module will be + called ni_daq_dio24. + +config COMEDI_NI_LABPC_CS + tristate "NI DAQCard-1200 PCMCIA support" + depends on COMEDI_NI_LABPC + default N + ---help--- + Enable support for the National Instruments PCMCIA DAQCard-1200 + + To compile this driver as a module, choose M here: the module will be + called ni_labpc_cs. + +config COMEDI_NI_MIO_CS + tristate "NI DAQCard E series PCMCIA support" + depends on COMEDI_NI_TIO && COMEDI_NI_COMMON + default N + select COMEDI_FC + ---help--- + Enable support for the National Instruments PCMCIA DAQCard E series + DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E + and DAQCard-6036E + + To compile this driver as a module, choose M here: the module will be + called ni_mio_cs. + +config COMEDI_QUATECH_DAQP_CS + tristate "Quatech DAQP PCMCIA data capture card support" + default N + ---help--- + Enable support for the Quatech DAQP PCMCIA data capture cards + DAQP-208 and DAQP-308 + + To compile this driver as a module, choose M here: the module will be + called quatech_daqp_cs. + +endif # COMEDI_PCMCIA_DRIVERS + +menuconfig COMEDI_USB_DRIVERS tristate "Comedi USB drivers" depends on COMEDI && USB default N ---help--- - Enable lots of comedi USB drivers to be built + Enable comedi USB drivers to be built + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about USB comedi drivers. + +if COMEDI_USB_DRIVERS && USB + +config COMEDI_DT9812 + tristate "DataTranslation DT9812 USB module support" + default N + ---help--- + Enable support for the Data Translation DT9812 USB module + + To compile this driver as a module, choose M here: the module will be + called dt9812. + +config COMEDI_USBDUX + tristate "ITL USBDUX support" + default N + ---help--- + Enable support for the University of Stirling USB DAQ and INCITE + Technology Limited driver + + To compile this driver as a module, choose M here: the module will be + called usbdux. + +config COMEDI_USBDUXFAST + tristate "ITL USB-DUXfast support" + select COMEDI_FC + default N + ---help--- + Enable support for the University of Stirling USB-DUXfast and INCITE + Technology Limited driver + + To compile this driver as a module, choose M here: the module will be + called usbduxfast. + +config COMEDI_VMK80XX + tristate "Velleman VM110/VM140 USB Board support" + default N + ---help--- + Build the Velleman USB Board Low-Level Driver supporting the + K8055/K8061 aka VM110/VM140 devices + + To compile this driver as a module, choose M here: the module will be + called vmk80xx. + +endif # COMEDI_USB_DRIVERS + +menuconfig COMEDI_NI_COMMON + tristate "Comedi National Instruments card support" + depends on COMEDI + default N + ---help--- + Enable comedi support for National Instruments cards. + Modules in this section are used by many comedi NI drivers. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about National Instruments cards. + +if COMEDI_NI_COMMON + +config COMEDI_MITE + tristate "NI Mite PCI interface chip support" + depends on PCI + default N + ---help--- + Enable support for National Instruments Mite PCI interface chip + + To compile this driver as a module, choose M here: the module will be + called mite. + +config COMEDI_NI_TIO + tristate "NI general purpose counter support" + select COMEDI_MITE + default N + ---help--- + Enable support for National Instruments general purpose counters. + This module is not used directly by end-users. Rather, it + is used by other drivers (for example ni_660x and ni_pcimio) + to provide support for NI's general purpose counters. + + To compile this driver as a modules, choose M here: two modules will + be build: ni_tio and ni_tiocmd. + +config COMEDI_NI_LABPC + tristate "NI Lab-PC and compatibles ISA and PCI support" + select COMEDI_FC + default N + ---help--- + Enable support for National Instruments Lab-PC and compatibles + Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200. + Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has + not yet been added to the driver. + + To compile this driver as a module, choose M here: the module will be + called ni_labpc. + +endif # COMEDI_NI_COMMON + +config COMEDI_FC + tristate "Comedi shared functions for low-level driver support" + default N + ---help--- + Enable support for shared functions for low-level drivers. + This module is not used directly by end-users. Rather, it + is used by many other comedi drivers. + + To compile this driver as a module, choose M here: the module will be + called comedi_fc. |