1 files changed, 0 insertions, 350 deletions
diff --git a/drivers/staging/gma500/cdv_device.c b/drivers/staging/gma500/cdv_device.c
deleted file mode 100644
index 8ec10caab13e..000000000000
--- a/drivers/staging/gma500/cdv_device.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/**************************************************************************
- * Copyright (c) 2011, Intel Corporation.
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- **************************************************************************/
-
-#include <linux/backlight.h>
-#include <drm/drmP.h>
-#include <drm/drm.h>
-#include "psb_drm.h"
-#include "psb_drv.h"
-#include "psb_reg.h"
-#include "psb_intel_reg.h"
-#include "intel_bios.h"
-#include "cdv_device.h"
-
-#define VGA_SR_INDEX		0x3c4
-#define VGA_SR_DATA		0x3c5
-
-static void cdv_disable_vga(struct drm_device *dev)
-{
-	u8 sr1;
-	u32 vga_reg;
-
-	vga_reg = VGACNTRL;
-
-	outb(1, VGA_SR_INDEX);
-	sr1 = inb(VGA_SR_DATA);
-	outb(sr1 | 1<<5, VGA_SR_DATA);
-	udelay(300);
-
-	REG_WRITE(vga_reg, VGA_DISP_DISABLE);
-	REG_READ(vga_reg);
-}
-
-static int cdv_output_init(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	cdv_disable_vga(dev);
-
-	cdv_intel_crt_init(dev, &dev_priv->mode_dev);
-	cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
-
-	/* These bits indicate HDMI not SDVO on CDV, but we don't yet support
-	   the HDMI interface */
-	if (REG_READ(SDVOB) & SDVO_DETECTED)
-		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
-	if (REG_READ(SDVOC) & SDVO_DETECTED)
-		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
-	return 0;
-}
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-
-/*
- *	Poulsbo Backlight Interfaces
- */
-
-#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
-#define BLC_PWM_FREQ_CALC_CONSTANT 32
-#define MHz 1000000
-
-#define PSB_BLC_PWM_PRECISION_FACTOR    10
-#define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
-#define PSB_BLC_MIN_PWM_REG_FREQ        0x2
-
-#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
-#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
-
-static int cdv_brightness;
-static struct backlight_device *cdv_backlight_device;
-
-static int cdv_get_brightness(struct backlight_device *bd)
-{
-	/* return locally cached var instead of HW read (due to DPST etc.) */
-	/* FIXME: ideally return actual value in case firmware fiddled with
-	   it */
-	return cdv_brightness;
-}
-
-
-static int cdv_backlight_setup(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	unsigned long core_clock;
-	/* u32 bl_max_freq; */
-	/* unsigned long value; */
-	u16 bl_max_freq;
-	uint32_t value;
-	uint32_t blc_pwm_precision_factor;
-
-	/* get bl_max_freq and pol from dev_priv*/
-	if (!dev_priv->lvds_bl) {
-		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
-		return -ENOENT;
-	}
-	bl_max_freq = dev_priv->lvds_bl->freq;
-	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
-
-	core_clock = dev_priv->core_freq;
-
-	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
-	value *= blc_pwm_precision_factor;
-	value /= bl_max_freq;
-	value /= blc_pwm_precision_factor;
-
-	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
-		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
-				return -ERANGE;
-	else {
-		/* FIXME */
-	}
-	return 0;
-}
-
-static int cdv_set_brightness(struct backlight_device *bd)
-{
-	int level = bd->props.brightness;
-
-	/* Percentage 1-100% being valid */
-	if (level < 1)
-		level = 1;
-
-	/*cdv_intel_lvds_set_brightness(dev, level); FIXME */
-	cdv_brightness = level;
-	return 0;
-}
-
-static const struct backlight_ops cdv_ops = {
-	.get_brightness = cdv_get_brightness,
-	.update_status  = cdv_set_brightness,
-};
-
-static int cdv_backlight_init(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	int ret;
-	struct backlight_properties props;
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.max_brightness = 100;
-	props.type = BACKLIGHT_PLATFORM;
-
-	cdv_backlight_device = backlight_device_register("psb-bl",
-					NULL, (void *)dev, &cdv_ops, &props);
-	if (IS_ERR(cdv_backlight_device))
-		return PTR_ERR(cdv_backlight_device);
-
-	ret = cdv_backlight_setup(dev);
-	if (ret < 0) {
-		backlight_device_unregister(cdv_backlight_device);
-		cdv_backlight_device = NULL;
-		return ret;
-	}
-	cdv_backlight_device->props.brightness = 100;
-	cdv_backlight_device->props.max_brightness = 100;
-	backlight_update_status(cdv_backlight_device);
-	dev_priv->backlight_device = cdv_backlight_device;
-	return 0;
-}
-
-#endif
-
-/*
- *	Provide the Cedarview specific chip logic and low level methods
- *	for power management
- *
- *	FIXME: we need to implement the apm/ospm base management bits
- *	for this and the MID devices.
- */
-
-static inline u32 CDV_MSG_READ32(uint port, uint offset)
-{
-	int mcr = (0x10<<24) | (port << 16) | (offset << 8);
-	uint32_t ret_val = 0;
-	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
-	pci_write_config_dword(pci_root, 0xD0, mcr);
-	pci_read_config_dword(pci_root, 0xD4, &ret_val);
-	pci_dev_put(pci_root);
-	return ret_val;
-}
-
-static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
-{
-	int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
-	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
-	pci_write_config_dword(pci_root, 0xD4, value);
-	pci_write_config_dword(pci_root, 0xD0, mcr);
-	pci_dev_put(pci_root);
-}
-
-#define PSB_APM_CMD			0x0
-#define PSB_APM_STS			0x04
-#define PSB_PM_SSC			0x20
-#define PSB_PM_SSS			0x30
-#define PSB_PWRGT_GFX_MASK		0x3
-#define CDV_PWRGT_DISPLAY_CNTR		0x000fc00c
-#define CDV_PWRGT_DISPLAY_STS		0x000fc00c
-
-static void cdv_init_pm(struct drm_device *dev)
-{
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	u32 pwr_cnt;
-	int i;
-
-	dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
-							PSB_APMBA) & 0xFFFF;
-	dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
-							PSB_OSPMBA) & 0xFFFF;
-
-	/* Force power on for now */
-	pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
-	pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
-
-	outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
-	for (i = 0; i < 5; i++) {
-		u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
-		if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
-			break;
-		udelay(10);
-	}
-	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
-	pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
-	outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
-	for (i = 0; i < 5; i++) {
-		u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
-		if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
-			break;
-		udelay(10);
-	}
-}
-
-/**
- *	cdv_save_display_registers	-	save registers lost on suspend
- *	@dev: our DRM device
- *
- *	Save the state we need in order to be able to restore the interface
- *	upon resume from suspend
- *
- *	FIXME: review
- */
-static int cdv_save_display_registers(struct drm_device *dev)
-{
-	return 0;
-}
-
-/**
- *	cdv_restore_display_registers	-	restore lost register state
- *	@dev: our DRM device
- *
- *	Restore register state that was lost during suspend and resume.
- *
- *	FIXME: review
- */
-static int cdv_restore_display_registers(struct drm_device *dev)
-{
-	return 0;
-}
-
-static int cdv_power_down(struct drm_device *dev)
-{
-	return 0;
-}
-
-static int cdv_power_up(struct drm_device *dev)
-{
-	return 0;
-}
-
-/* FIXME ? - shared with Poulsbo */
-static void cdv_get_core_freq(struct drm_device *dev)
-{
-	uint32_t clock;
-	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
-	struct drm_psb_private *dev_priv = dev->dev_private;
-
-	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
-	pci_read_config_dword(pci_root, 0xD4, &clock);
-	pci_dev_put(pci_root);
-
-	switch (clock & 0x07) {
-	case 0:
-		dev_priv->core_freq = 100;
-		break;
-	case 1:
-		dev_priv->core_freq = 133;
-		break;
-	case 2:
-		dev_priv->core_freq = 150;
-		break;
-	case 3:
-		dev_priv->core_freq = 178;
-		break;
-	case 4:
-		dev_priv->core_freq = 200;
-		break;
-	case 5:
-	case 6:
-	case 7:
-		dev_priv->core_freq = 266;
-	default:
-		dev_priv->core_freq = 0;
-	}
-}
-
-static int cdv_chip_setup(struct drm_device *dev)
-{
-	cdv_get_core_freq(dev);
-	gma_intel_opregion_init(dev);
-	psb_intel_init_bios(dev);
-	return 0;
-}
-
-/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
-
-const struct psb_ops cdv_chip_ops = {
-	.name = "Cedartrail",
-	.accel_2d = 0,
-	.pipes = 2,
-	.sgx_offset = MRST_SGX_OFFSET,
-	.chip_setup = cdv_chip_setup,
-
-	.crtc_helper = &cdv_intel_helper_funcs,
-	.crtc_funcs = &cdv_intel_crtc_funcs,
-
-	.output_init = cdv_output_init,
-
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-	.backlight_init = cdv_backlight_init,
-#endif
-
-	.init_pm = cdv_init_pm,
-	.save_regs = cdv_save_display_registers,
-	.restore_regs = cdv_restore_display_registers,
-	.power_down = cdv_power_down,
-	.power_up = cdv_power_up,
-};