1 files changed, 0 insertions, 509 deletions

diff --git a/drivers/staging/gma500/mdfld_tpo_cmd.c b/drivers/staging/gma500/mdfld_tpo_cmd.c
deleted file mode 100644
index c7f7c9c19bc1..000000000000
--- a/drivers/staging/gma500/mdfld_tpo_cmd.c
+++ /dev/null
@@ -1,509 +0,0 @@
-/*
- * Copyright (c)  2010 Intel Corporation
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicensen
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice (including the next
- * paragraph) shall be included in all copies or substantial portions of the
- * Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- * Thomas Eaton <thomas.g.eaton@intel.com>
- * Scott Rowe <scott.m.rowe@intel.com>
- */
-
-#include "mdfld_dsi_dbi.h"
-#include "mdfld_dsi_dpi.h"
-#include "mdfld_dsi_output.h"
-#include "mdfld_output.h"
-#include "mdfld_dsi_dbi_dpu.h"
-#include "mdfld_dsi_pkg_sender.h"
-
-#include "displays/tpo_cmd.h"
-
-static struct drm_display_mode *tpo_cmd_get_config_mode(struct drm_device *dev)
-{
-	struct drm_display_mode *mode;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	struct mrst_timing_info *ti = &dev_priv->gct_data.DTD;
-	bool use_gct = false;
-
-	mode = kzalloc(sizeof(*mode), GFP_KERNEL);
-	if (!mode)
-		return NULL;
-
-	if (use_gct) {
-		dev_dbg(dev->dev, "gct find MIPI panel.\n");
-
-		mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo;
-		mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo;
-		mode->hsync_start = mode->hdisplay + \
-				((ti->hsync_offset_hi << 8) | \
-				ti->hsync_offset_lo);
-		mode->hsync_end = mode->hsync_start + \
-				((ti->hsync_pulse_width_hi << 8) | \
-				ti->hsync_pulse_width_lo);
-		mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \
-								ti->hblank_lo);
-		mode->vsync_start = \
-			mode->vdisplay + ((ti->vsync_offset_hi << 8) | \
-						ti->vsync_offset_lo);
-		mode->vsync_end = \
-			mode->vsync_start + ((ti->vsync_pulse_width_hi << 8) | \
-						ti->vsync_pulse_width_lo);
-		mode->vtotal = mode->vdisplay + \
-				((ti->vblank_hi << 8) | ti->vblank_lo);
-		mode->clock = ti->pixel_clock * 10;
-
-		dev_dbg(dev->dev, "hdisplay is %d\n", mode->hdisplay);
-		dev_dbg(dev->dev, "vdisplay is %d\n", mode->vdisplay);
-		dev_dbg(dev->dev, "HSS is %d\n", mode->hsync_start);
-		dev_dbg(dev->dev, "HSE is %d\n", mode->hsync_end);
-		dev_dbg(dev->dev, "htotal is %d\n", mode->htotal);
-		dev_dbg(dev->dev, "VSS is %d\n", mode->vsync_start);
-		dev_dbg(dev->dev, "VSE is %d\n", mode->vsync_end);
-		dev_dbg(dev->dev, "vtotal is %d\n", mode->vtotal);
-		dev_dbg(dev->dev, "clock is %d\n", mode->clock);
-	} else {
-		mode->hdisplay = 864;
-		mode->vdisplay = 480;
-		mode->hsync_start = 872;
-		mode->hsync_end = 876;
-		mode->htotal = 884;
-		mode->vsync_start = 482;
-		mode->vsync_end = 494;
-		mode->vtotal = 486;
-		mode->clock = 25777;
-	}
-
-	drm_mode_set_name(mode);
-	drm_mode_set_crtcinfo(mode, 0);
-
-	mode->type |= DRM_MODE_TYPE_PREFERRED;
-
-	return mode;
-}
-
-static bool mdfld_dsi_dbi_mode_fixup(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct drm_display_mode *fixed_mode = tpo_cmd_get_config_mode(dev);
-
-	if (fixed_mode) {
-		adjusted_mode->hdisplay = fixed_mode->hdisplay;
-		adjusted_mode->hsync_start = fixed_mode->hsync_start;
-		adjusted_mode->hsync_end = fixed_mode->hsync_end;
-		adjusted_mode->htotal = fixed_mode->htotal;
-		adjusted_mode->vdisplay = fixed_mode->vdisplay;
-		adjusted_mode->vsync_start = fixed_mode->vsync_start;
-		adjusted_mode->vsync_end = fixed_mode->vsync_end;
-		adjusted_mode->vtotal = fixed_mode->vtotal;
-		adjusted_mode->clock = fixed_mode->clock;
-		drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
-		kfree(fixed_mode);
-	}
-	return true;
-}
-
-static void mdfld_dsi_dbi_set_power(struct drm_encoder *encoder, bool on)
-{
-	int ret = 0;
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output =
-				MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct mdfld_dsi_config *dsi_config =
-		mdfld_dsi_encoder_get_config(dsi_encoder);
-	struct mdfld_dsi_pkg_sender *sender =
-		mdfld_dsi_encoder_get_pkg_sender(dsi_encoder);
-	struct drm_device *dev = encoder->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	u32 reg_offset = 0;
-	int pipe = (dbi_output->channel_num == 0) ? 0 : 2;
-	u32 data = 0;
-
-	dev_dbg(dev->dev, "pipe %d : %s, panel on: %s\n",
-			pipe, on ? "On" : "Off",
-			dbi_output->dbi_panel_on ? "True" : "False");
-
-	if (pipe == 2) {
-		if (on)
-			dev_priv->dual_mipi = true;
-		else
-			dev_priv->dual_mipi = false;
-		reg_offset = MIPIC_REG_OFFSET;
-	} else {
-		if (!on)
-			dev_priv->dual_mipi = false;
-	}
-
-	if (!gma_power_begin(dev, true)) {
-		dev_err(dev->dev, "hw begin failed\n");
-		return;
-	}
-
-	if (on) {
-		if (dbi_output->dbi_panel_on)
-			goto out_err;
-
-		ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_ON);
-		if (ret) {
-			dev_err(dev->dev, "power on error\n");
-			goto out_err;
-		}
-
-		dbi_output->dbi_panel_on = true;
-
-		if (pipe == 2)
-			dev_priv->dbi_panel_on2 = true;
-		else
-			dev_priv->dbi_panel_on = true;
-		mdfld_enable_te(dev, pipe);
-	} else {
-		if (!dbi_output->dbi_panel_on && !dbi_output->first_boot)
-			goto out_err;
-
-		dbi_output->dbi_panel_on = false;
-		dbi_output->first_boot = false;
-
-		if (pipe == 2)
-			dev_priv->dbi_panel_on2 = false;
-		else
-			dev_priv->dbi_panel_on = false;
-
-		mdfld_disable_te(dev, pipe);
-
-		ret = mdfld_dsi_dbi_update_power(dbi_output, DRM_MODE_DPMS_OFF);
-		if (ret) {
-			dev_err(dev->dev, "power on error\n");
-			goto out_err;
-		}
-	}
-
-	/*
-	 * FIXME: this is a WA for TPO panel crash on DPMS on & off around
-	 * 83 times. the root cause of this issue is that Booster in
-	 * drvIC crashed. Add this WA so that we can resume the driver IC
-	 * once we found that booster has a fault
-	 */
-	mdfld_dsi_get_power_mode(dsi_config,
-				&data,
-				MDFLD_DSI_HS_TRANSMISSION);
-
-	if (on && data && !(data & (1 << 7))) {
-		/* Soft reset */
-		mdfld_dsi_send_dcs(sender,
-				   DCS_SOFT_RESET,
-				   NULL,
-				   0,
-				   CMD_DATA_SRC_PIPE,
-				   MDFLD_DSI_SEND_PACKAGE);
-
-		/* Init drvIC */
-		if (dbi_output->p_funcs->drv_ic_init)
-			dbi_output->p_funcs->drv_ic_init(dsi_config,
-							 pipe);
-	}
- 
-out_err:
-	gma_power_end(dev);
-	if (ret)
-		dev_err(dev->dev, "failed\n");
-}
-
-
-static void mdfld_dsi_dbi_mode_set(struct drm_encoder *encoder,
-				   struct drm_display_mode *mode,
-				   struct drm_display_mode *adjusted_mode)
-{
-	int ret = 0;
-	struct drm_device *dev = encoder->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dsi_output =
-					MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct mdfld_dsi_config *dsi_config =
-				mdfld_dsi_encoder_get_config(dsi_encoder);
-	struct mdfld_dsi_connector *dsi_connector = dsi_config->connector;
-	int pipe = dsi_connector->pipe;
-	u8 param = 0;
-
-	/* Regs */
-	u32 mipi_reg = MIPI;
-	u32 dspcntr_reg = DSPACNTR;
-	u32 pipeconf_reg = PIPEACONF;
-	u32 reg_offset = 0;
-
-	/* Values */
-	u32 dspcntr_val = dev_priv->dspcntr;
-	u32 pipeconf_val = dev_priv->pipeconf;
-	u32 h_active_area = mode->hdisplay;
-	u32 v_active_area = mode->vdisplay;
-	u32 mipi_val;
-
-	mipi_val = (PASS_FROM_SPHY_TO_AFE | SEL_FLOPPED_HSTX |
-						TE_TRIGGER_GPIO_PIN);
-
-	dev_dbg(dev->dev, "mipi_val =0x%x\n", mipi_val);
-
-	dev_dbg(dev->dev, "type %s\n", (pipe == 2) ? "MIPI2" : "MIPI");
-	dev_dbg(dev->dev, "h %d v %d\n", mode->hdisplay, mode->vdisplay);
-
-	if (pipe == 2) {
-		mipi_reg = MIPI_C;
-		dspcntr_reg = DSPCCNTR;
-		pipeconf_reg = PIPECCONF;
-
-		reg_offset = MIPIC_REG_OFFSET;
-
-		dspcntr_val = dev_priv->dspcntr2;
-		pipeconf_val = dev_priv->pipeconf2;
-	} else {
-		mipi_val |= 0x2; /*two lanes for port A and C respectively*/
-	}
-
-	if (!gma_power_begin(dev, true)) {
-		dev_err(dev->dev, "hw begin failed\n");
-		return;
-	}
-
-	REG_WRITE(dspcntr_reg, dspcntr_val);
-	REG_READ(dspcntr_reg);
-
-	/* 20ms delay before sending exit_sleep_mode */
-	msleep(20);
-
-	/* Send exit_sleep_mode DCS */
-	ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_EXIT_SLEEP_MODE,
-					NULL, 0, CMD_DATA_SRC_SYSTEM_MEM);
-	if (ret) {
-		dev_err(dev->dev, "sent exit_sleep_mode faild\n");
-		goto out_err;
-	}
-
-	/* Send set_tear_on DCS */
-	ret = mdfld_dsi_dbi_send_dcs(dsi_output, DCS_SET_TEAR_ON,
-					&param, 1, CMD_DATA_SRC_SYSTEM_MEM);
-	if (ret) {
-		dev_err(dev->dev, "%s - sent set_tear_on faild\n", __func__);
-		goto out_err;
-	}
-
-	/* Do some init stuff */
-	REG_WRITE(pipeconf_reg, pipeconf_val | PIPEACONF_DSR);
-	REG_READ(pipeconf_reg);
-
-	/* TODO: this looks ugly, try to move it to CRTC mode setting*/
-	if (pipe == 2)
-		dev_priv->pipeconf2 |= PIPEACONF_DSR;
-	else
-		dev_priv->pipeconf |= PIPEACONF_DSR;
-
-	dev_dbg(dev->dev, "pipeconf %x\n",  REG_READ(pipeconf_reg));
-
-	ret = mdfld_dsi_dbi_update_area(dsi_output, 0, 0,
-				h_active_area - 1, v_active_area - 1);
-	if (ret) {
-		dev_err(dev->dev, "update area failed\n");
-		goto out_err;
-	}
-
-out_err:
-	gma_power_end(dev);
-
-	if (ret)
-		dev_err(dev->dev, "mode set failed\n");
-}
-
-static void mdfld_dsi_dbi_prepare(struct drm_encoder *encoder)
-{
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output
-				= MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-
-	dbi_output->mode_flags |= MODE_SETTING_IN_ENCODER;
-	dbi_output->mode_flags &= ~MODE_SETTING_ENCODER_DONE;
-
-	mdfld_dsi_dbi_set_power(encoder, false);
-}
-
-static void mdfld_dsi_dbi_commit(struct drm_encoder *encoder)
-{
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output =
-					MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct drm_device *dev = dbi_output->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	struct psb_drm_dpu_rect rect;
-
-	mdfld_dsi_dbi_set_power(encoder, true);
-	dbi_output->mode_flags &= ~MODE_SETTING_IN_ENCODER;
-
-	rect.x = rect.y = 0;
-	rect.width = 864;
-	rect.height = 480;
-
-	if (dbi_output->channel_num == 1) {
-		dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_2;
-		/*if dpu enabled report a fullscreen damage*/
-		mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEC, &rect);
-	} else {
-		dev_priv->dsr_fb_update |= MDFLD_DSR_2D_3D_0;
-		mdfld_dbi_dpu_report_damage(dev, MDFLD_PLANEA, &rect);
-	}
-	dbi_output->mode_flags |= MODE_SETTING_ENCODER_DONE;
-}
-
-static void mdfld_dsi_dbi_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct mdfld_dsi_encoder *dsi_encoder = MDFLD_DSI_ENCODER(encoder);
-	struct mdfld_dsi_dbi_output *dbi_output
-				= MDFLD_DSI_DBI_OUTPUT(dsi_encoder);
-	struct drm_device *dev = dbi_output->dev;
-	struct drm_psb_private *dev_priv = dev->dev_private;
-	static bool bdispoff;
-
-	dev_dbg(dev->dev, "%s\n", (mode == DRM_MODE_DPMS_ON ? "on" : "off"));
-
-	if (mode == DRM_MODE_DPMS_ON) {
-		/*
-		 * FIXME: in case I am wrong!
-		 * we don't need to exit dsr here to wake up plane/pipe/pll
-		 * if everything goes right, hw_begin will resume them all
-		 * during set_power.
-		 */
-		if (bdispoff /* FIXME && gbgfxsuspended */) {
-			mdfld_dsi_dbi_exit_dsr(dev, MDFLD_DSR_2D_3D);
-			bdispoff = false;
-			dev_priv->dispstatus = true;
-		}
-
-		mdfld_dsi_dbi_set_power(encoder, true);
-		/* FIXME if (gbgfxsuspended)
-			gbgfxsuspended = false; */
-	} else {
-		/*
-		 * I am not sure whether this is the perfect place to
-		 * turn rpm on since we still have a lot of CRTC turnning
-		 * on work to do.
-		 */
-		bdispoff = true;
-		dev_priv->dispstatus = false;
-		mdfld_dsi_dbi_set_power(encoder, false);
-	}
-}
-
-
-/*
- * Update the DBI MIPI Panel Frame Buffer.
- */
-static void mdfld_dsi_dbi_update_fb(struct mdfld_dsi_dbi_output *dbi_output,
-								int pipe)
-{
-	struct mdfld_dsi_pkg_sender *sender =
-		mdfld_dsi_encoder_get_pkg_sender(&dbi_output->base);
-	struct drm_device *dev = dbi_output->dev;
-	struct drm_crtc *crtc = dbi_output->base.base.crtc;
-	struct psb_intel_crtc *psb_crtc = (crtc) ?
-					to_psb_intel_crtc(crtc) : NULL;
-	u32 dpll_reg = MRST_DPLL_A;
-	u32 dspcntr_reg = DSPACNTR;
-	u32 pipeconf_reg = PIPEACONF;
-	u32 dsplinoff_reg = DSPALINOFF;
-	u32 dspsurf_reg = DSPASURF;
-	u32 reg_offset = 0;
-
-	/* If mode setting on-going, back off */
-	if ((dbi_output->mode_flags & MODE_SETTING_ON_GOING) ||
-		(psb_crtc && psb_crtc->mode_flags & MODE_SETTING_ON_GOING) ||
-		!(dbi_output->mode_flags & MODE_SETTING_ENCODER_DONE))
-		return;
-
-	if (pipe == 2) {
-		dspcntr_reg = DSPCCNTR;
-		pipeconf_reg = PIPECCONF;
-		dsplinoff_reg = DSPCLINOFF;
-		dspsurf_reg = DSPCSURF;
-		reg_offset = MIPIC_REG_OFFSET;
-	}
-
-	if (!gma_power_begin(dev, true)) {
-		dev_err(dev->dev, "hw begin failed\n");
-		return;
-	}
-
-	/* Check DBI FIFO status */
-	if (!(REG_READ(dpll_reg) & DPLL_VCO_ENABLE) ||
-	   !(REG_READ(dspcntr_reg) & DISPLAY_PLANE_ENABLE) ||
-	   !(REG_READ(pipeconf_reg) & DISPLAY_PLANE_ENABLE))
-		goto update_fb_out0;
-
-	/* Refresh plane changes */
-	REG_WRITE(dsplinoff_reg, REG_READ(dsplinoff_reg));
-	REG_WRITE(dspsurf_reg, REG_READ(dspsurf_reg));
-	REG_READ(dspsurf_reg);
-
-	mdfld_dsi_send_dcs(sender,
-			   DCS_WRITE_MEM_START,
-			   NULL,
-			   0,
-			   CMD_DATA_SRC_PIPE,
-			   MDFLD_DSI_SEND_PACKAGE);
-
-	dbi_output->dsr_fb_update_done = true;
-update_fb_out0:
-	gma_power_end(dev);
-}
-
-static int tpo_cmd_get_panel_info(struct drm_device *dev,
-				int pipe,
-				struct panel_info *pi)
-{
-	if (!dev || !pi)
-		return -EINVAL;
-
-	pi->width_mm = TPO_PANEL_WIDTH;
-	pi->height_mm = TPO_PANEL_HEIGHT;
-
-	return 0;
-}
-
-
-/* TPO DBI encoder helper funcs */
-static const struct drm_encoder_helper_funcs mdfld_dsi_dbi_helper_funcs = {
-	.dpms = mdfld_dsi_dbi_dpms,
-	.mode_fixup = mdfld_dsi_dbi_mode_fixup,
-	.prepare = mdfld_dsi_dbi_prepare,
-	.mode_set = mdfld_dsi_dbi_mode_set,
-	.commit = mdfld_dsi_dbi_commit,
-};
-
-/* TPO DBI encoder funcs */
-static const struct drm_encoder_funcs mdfld_dsi_dbi_encoder_funcs = {
-	.destroy = drm_encoder_cleanup,
-};
-
-void tpo_cmd_init(struct drm_device *dev, struct panel_funcs *p_funcs)
-{
-	p_funcs->encoder_funcs = &mdfld_dsi_dbi_encoder_funcs;
-	p_funcs->encoder_helper_funcs = &mdfld_dsi_dbi_helper_funcs;
-	p_funcs->get_config_mode = &tpo_cmd_get_config_mode;
-	p_funcs->update_fb = mdfld_dsi_dbi_update_fb;
-	p_funcs->get_panel_info = tpo_cmd_get_panel_info;
-	p_funcs->reset = mdfld_dsi_panel_reset;
-	p_funcs->drv_ic_init = mdfld_dsi_brightness_init;
-}