diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/ieee80211_ext.h')
| -rw-r--r-- | drivers/staging/rtl8188eu/include/ieee80211_ext.h | 290 |
1 files changed, 290 insertions, 0 deletions
diff --git a/drivers/staging/rtl8188eu/include/ieee80211_ext.h b/drivers/staging/rtl8188eu/include/ieee80211_ext.h new file mode 100644 index 000000000000..1052d1817a97 --- /dev/null +++ b/drivers/staging/rtl8188eu/include/ieee80211_ext.h @@ -0,0 +1,290 @@ +/****************************************************************************** + * + * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * + ******************************************************************************/ +#ifndef __IEEE80211_EXT_H +#define __IEEE80211_EXT_H + +#include <osdep_service.h> +#include <drv_types.h> + +#define WMM_OUI_TYPE 2 +#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0 +#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1 +#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2 +#define WMM_VERSION 1 + +#define WPA_PROTO_WPA BIT(0) +#define WPA_PROTO_RSN BIT(1) + +#define WPA_KEY_MGMT_IEEE8021X BIT(0) +#define WPA_KEY_MGMT_PSK BIT(1) +#define WPA_KEY_MGMT_NONE BIT(2) +#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3) +#define WPA_KEY_MGMT_WPA_NONE BIT(4) + + +#define WPA_CAPABILITY_PREAUTH BIT(0) +#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6) +#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9) + + +#define PMKID_LEN 16 + + +struct wpa_ie_hdr { + u8 elem_id; + u8 len; + u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */ + u8 version[2]; /* little endian */ +} __packed; + +struct rsn_ie_hdr { + u8 elem_id; /* WLAN_EID_RSN */ + u8 len; + u8 version[2]; /* little endian */ +} __packed; + +struct wme_ac_parameter { +#if defined(__LITTLE_ENDIAN) + /* byte 1 */ + u8 aifsn:4, + acm:1, + aci:2, + reserved:1; + + /* byte 2 */ + u8 eCWmin:4, + eCWmax:4; +#elif defined(__BIG_ENDIAN) + /* byte 1 */ + u8 reserved:1, + aci:2, + acm:1, + aifsn:4; + + /* byte 2 */ + u8 eCWmax:4, + eCWmin:4; +#else +#error "Please fix <endian.h>" +#endif + + /* bytes 3 & 4 */ + u16 txopLimit; +} __packed; + +struct wme_parameter_element { + /* required fields for WME version 1 */ + u8 oui[3]; + u8 oui_type; + u8 oui_subtype; + u8 version; + u8 acInfo; + u8 reserved; + struct wme_ac_parameter ac[4]; + +} __packed; + +#define WPA_PUT_LE16(a, val) \ + do { \ + (a)[1] = ((u16) (val)) >> 8; \ + (a)[0] = ((u16) (val)) & 0xff; \ + } while (0) + +#define WPA_PUT_BE32(a, val) \ + do { \ + (a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff); \ + (a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff); \ + (a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff); \ + (a)[3] = (u8) (((u32) (val)) & 0xff); \ + } while (0) + +#define WPA_PUT_LE32(a, val) \ + do { \ + (a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff); \ + (a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff); \ + (a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff); \ + (a)[0] = (u8) (((u32) (val)) & 0xff); \ + } while (0) + +#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val)) + +/* Action category code */ +enum ieee80211_category { + WLAN_CATEGORY_SPECTRUM_MGMT = 0, + WLAN_CATEGORY_QOS = 1, + WLAN_CATEGORY_DLS = 2, + WLAN_CATEGORY_BACK = 3, + WLAN_CATEGORY_HT = 7, + WLAN_CATEGORY_WMM = 17, +}; + +/* SPECTRUM_MGMT action code */ +enum ieee80211_spectrum_mgmt_actioncode { + WLAN_ACTION_SPCT_MSR_REQ = 0, + WLAN_ACTION_SPCT_MSR_RPRT = 1, + WLAN_ACTION_SPCT_TPC_REQ = 2, + WLAN_ACTION_SPCT_TPC_RPRT = 3, + WLAN_ACTION_SPCT_CHL_SWITCH = 4, + WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5, +}; + +/* BACK action code */ +enum ieee80211_back_actioncode { + WLAN_ACTION_ADDBA_REQ = 0, + WLAN_ACTION_ADDBA_RESP = 1, + WLAN_ACTION_DELBA = 2, +}; + +/* HT features action code */ +enum ieee80211_ht_actioncode { + WLAN_ACTION_NOTIFY_CH_WIDTH = 0, + WLAN_ACTION_SM_PS = 1, + WLAN_ACTION_PSPM = 2, + WLAN_ACTION_PCO_PHASE = 3, + WLAN_ACTION_MIMO_CSI_MX = 4, + WLAN_ACTION_MIMO_NONCP_BF = 5, + WLAN_ACTION_MIMP_CP_BF = 6, + WLAN_ACTION_ASEL_INDICATES_FB = 7, + WLAN_ACTION_HI_INFO_EXCHG = 8, +}; + +/* BACK (block-ack) parties */ +enum ieee80211_back_parties { + WLAN_BACK_RECIPIENT = 0, + WLAN_BACK_INITIATOR = 1, + WLAN_BACK_TIMER = 2, +}; + +struct ieee80211_mgmt { + u16 frame_control; + u16 duration; + u8 da[6]; + u8 sa[6]; + u8 bssid[6]; + u16 seq_ctrl; + union { + struct { + u16 auth_alg; + u16 auth_transaction; + u16 status_code; + /* possibly followed by Challenge text */ + u8 variable[0]; + } __packed auth; + struct { + u16 reason_code; + } __packed deauth; + struct { + u16 capab_info; + u16 listen_interval; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __packed assoc_req; + struct { + u16 capab_info; + u16 status_code; + u16 aid; + /* followed by Supported rates */ + u8 variable[0]; + } __packed assoc_resp, reassoc_resp; + struct { + u16 capab_info; + u16 listen_interval; + u8 current_ap[6]; + /* followed by SSID and Supported rates */ + u8 variable[0]; + } __packed reassoc_req; + struct { + u16 reason_code; + } __packed disassoc; + struct { + __le64 timestamp; + u16 beacon_int; + u16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params, TIM */ + u8 variable[0]; + } __packed beacon; + struct { + /* only variable items: SSID, Supported rates */ + u8 variable[0]; + } __packed probe_req; + struct { + __le64 timestamp; + u16 beacon_int; + u16 capab_info; + /* followed by some of SSID, Supported rates, + * FH Params, DS Params, CF Params, IBSS Params */ + u8 variable[0]; + } __packed probe_resp; + struct { + u8 category; + union { + struct { + u8 action_code; + u8 dialog_token; + u8 status_code; + u8 variable[0]; + } __packed wme_action; + struct { + u8 action_code; + u8 dialog_token; + u16 capab; + u16 timeout; + u16 start_seq_num; + } __packed addba_req; + struct { + u8 action_code; + u8 dialog_token; + u16 status; + u16 capab; + u16 timeout; + } __packed addba_resp; + struct { + u8 action_code; + u16 params; + u16 reason_code; + } __packed delba; + structi { + u8 action_code; + /* capab_info for open and confirm, + * reason for close + */ + u16 aux; + /* Followed in plink_confirm by status + * code, AID and supported rates, + * and directly by supported rates in + * plink_open and plink_close + */ + u8 variable[0]; + } __packed plink_action; + struct{ + u8 action_code; + u8 variable[0]; + } __packed mesh_action; + } __packed u; + } __packed action; + } __packed u; +} __packed; + +/* mgmt header + 1 byte category code */ +#define IEEE80211_MIN_ACTION_SIZE \ + FIELD_OFFSET(struct ieee80211_mgmt, u.action.u) + +#endif |