diff options
Diffstat (limited to 'drivers/staging/wlags49_h2/hcf.c')
-rw-r--r-- | drivers/staging/wlags49_h2/hcf.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/drivers/staging/wlags49_h2/hcf.c b/drivers/staging/wlags49_h2/hcf.c index d4bdd3ee8be1..a73317ef9350 100644 --- a/drivers/staging/wlags49_h2/hcf.c +++ b/drivers/staging/wlags49_h2/hcf.c @@ -540,7 +540,7 @@ HCF_STATIC hcf_16* BASED xxxx[ ] = { * *.CONDITIONS * Except for hcf_action with HCF_ACT_INT_FORCE_ON or HCF_ACT_INT_OFF as parameter or hcf_connect with an I/O -* address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceeded by a call of hcf_action with +* address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceded by a call of hcf_action with * HCF_ACT_INT_OFF as parameter. * Note that hcf_connect defaults to NIC interrupt disabled mode, i.e. as if hcf_action( HCF_ACT_INT_OFF ) * was called. @@ -843,7 +843,7 @@ hcf_16 i; *.MODULE int hcf_cntl( IFBP ifbp, hcf_16 cmd ) *.PURPOSE Connect or disconnect a specific port to a specific network. *!! ;???????????????? continue needs more explanation -* recovers by means of "continue" when the connect proces in CCX mode fails +* recovers by means of "continue" when the connect process in CCX mode fails * Enables or disables data transmission and reception for the NIC. * Activates static NIC configuration for a specific port at connect. * Activates static configuration for all ports at enable. @@ -1170,12 +1170,12 @@ LTV_STRCT x; io_addr = io_base; } -#if 0 //;? if a subsequent hcf_connect is preceeded by an hcf_disconnect the wakeup is not needed !! +#if 0 //;? if a subsequent hcf_connect is preceded by an hcf_disconnect the wakeup is not needed !! #if HCF_SLEEP OUT_PORT_WORD( .....+HREG_IO, HREG_IO_WAKEUP_ASYNC ); //OPW not yet useable MSF_WAIT(800); // MSF-defined function to wait n microseconds. note that MSF_WAIT uses not yet defined!!!! IFB_IOBase and IFB_TickIni (via PROT_CNT_INI) - so be carefull if this code is restored + so be careful if this code is restored #endif // HCF_SLEEP #endif // 0 @@ -1563,7 +1563,7 @@ DESC_STRCT *p = descp->next_desc_addr; //pointer to 2nd descriptor of frame * This function is called by the MSF to supply the HCF with new/more buffers for receive purposes. * The HCF can be used in 2 fashions: with and without encapsulation for data transfer. * This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant. -* As a consequence, some additional constaints apply to the number of descriptor and the buffers associated +* As a consequence, some additional constraints apply to the number of descriptor and the buffers associated * with the first 2 descriptors. Independent of the encapsulation feature, the COUNT fields are ignored. * A special case is the supplying of the DELWA descriptor, which must be supplied as the first descriptor. * @@ -1735,7 +1735,7 @@ DESC_STRCT *descp; // pointer to start of FrameList * - in case encapsulation by the HCF is selected: * - The FrameList does not consists of at least 2 Descriptors. * - The first databuffer does not contain exactly the (space for) the 802.11 header (== 28 words) -* - The first databuffer does not have a size to additionally accomodate the 802.3 header and the +* - The first databuffer does not have a size to additionally accommodate the 802.3 header and the * SNAP header of the frame after encapsulation (== 39 words). * - The second databuffer does not contain at least DA, SA and 'type/length' (==14 bytes or 7 words) *!! The 2nd part of the list of asserts should be kept in sync with put_frame_lst, in order to get @@ -1762,14 +1762,14 @@ DESC_STRCT *descp; // pointer to start of FrameList * - Copy DA/SA fields from the 2nd buffer * - Calculate total length of the message (snap-header + type-field + the length of all buffer fragments * associated with the 802.3 frame (i.e all descriptors except the first), but not the DestinationAddress, -* SourceAddress and lenght-field) +* SourceAddress and length-field) * Assert the message length * Write length. Note that the message is in BE format, hence on LE platforms the length must be converted * ;? THIS IS NOT WHAT CURRENTLY IS IMPLEMENTED * - Write snap header. Note that the last byte of the snap header is NOT copied, that byte is already in * place as result of the call to hcf_encap. * Note that there are many ways to skin a cat. To express the offsets in the 1st buffer while writing -* the snap header, HFS_TYPE is choosen as a reference point to make it easier to grasp that the snap header +* the snap header, HFS_TYPE is chosen as a reference point to make it easier to grasp that the snap header * and encapsualtion type are at least relative in the right. *8: modify 1st descriptor to reflect moved part of the 802.3 header + Snap-header * modify 2nd descriptor to skip the moved part of the 802.3 header (DA/SA @@ -1933,7 +1933,7 @@ hcf_16 t = (hcf_16)(*type<<8) + *(type+1); /* 2 */ * HCF_SUCCESS Success *!! via cmd_exe ( type >= CFG_RID_FW_MIN ) * HCF_ERR_NO_NIC NIC removed during retrieval -* HCF_ERR_TIME_OUT Expected Hermes event did not occure in expected time +* HCF_ERR_TIME_OUT Expected Hermes event did not occur in expected time *!! via cmd_exe and setup_bap (type >= CFG_RID_FW_MIN ) * HCF_ERR_DEFUNCT_... HCF is in defunct mode (bits 0x7F reflect cause) * @@ -2958,7 +2958,7 @@ or * hcf_service_nic is also skipped in those cases. * To prevent that hcf_service_nic reports bogus information to the MSF with all - possibly difficult to * debug - undesirable side effects, it is paramount to check the NIC presence. In former days the presence -* test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is choosen for strategy based on +* test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is chosen for strategy based on * HREG_EV_STAT, this is now also used in hcf_service_nic. The motivation to change strategy is partly * due to inconsistent F/W implementations with respect to HREG_SW_0 manipulation around reset and download. * Note that in polled environments Card Removal is not detected by INT_OFF which makes the check in @@ -4048,7 +4048,7 @@ hcf_32 FAR *p4; //prevent side effects from macro HCFASSERT( word_len == 0 || word_len == 2 || word_len == 4, word_len ) HCFASSERT( word_len == 0 || ((hcf_32)bufp & 1 ) == 0, (hcf_32)bufp ) HCFASSERT( word_len <= len, MERGE2( word_len, len ) ) - //see put_frag for an alternative implementation, but be carefull about what are int's and what are + //see put_frag for an alternative implementation, but be careful about what are int's and what are //hcf_16's if ( word_len ) { //. if there is anything to convert hcf_8 c; @@ -4712,7 +4712,7 @@ int rc = HCF_SUCCESS; * Note that len is unsigned, so even MSF I/F violation works out O.K. * The '2' in the expression "len+2" is used because 1 word is needed for L itself and 1 word is needed * for the zero-sentinel -*8: update MailBox Info length report to MSF with "oldest" MB Info Block size. Be carefull here, if you get +*8: update MailBox Info length report to MSF with "oldest" MB Info Block size. Be careful here, if you get * here before the MailBox is registered, you can't read from the buffer addressed by IFB_MBp (it is the * Null buffer) so don't move this code till the end of this routine but keep it where there is garuanteed * a buffer. |