summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/sc16is7xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/sc16is7xx.c')
-rw-r--r--drivers/tty/serial/sc16is7xx.c28
1 files changed, 28 insertions, 0 deletions
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index e48523da47ac..c1655aba131f 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -333,6 +333,7 @@ struct sc16is7xx_port {
struct kthread_worker kworker;
struct task_struct *kworker_task;
struct kthread_work irq_work;
+ struct mutex efr_lock;
struct sc16is7xx_one p[0];
};
@@ -504,6 +505,21 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
div /= 4;
}
+ /* In an amazing feat of design, the Enhanced Features Register shares
+ * the address of the Interrupt Identification Register, and is
+ * switched in by writing a magic value (0xbf) to the Line Control
+ * Register. Any interrupt firing during this time will see the EFR
+ * where it expects the IIR to be, leading to "Unexpected interrupt"
+ * messages.
+ *
+ * Prevent this possibility by claiming a mutex while accessing the
+ * EFR, and claiming the same mutex from within the interrupt handler.
+ * This is similar to disabling the interrupt, but that doesn't work
+ * because the bulk of the interrupt processing is run as a workqueue
+ * job in thread context.
+ */
+ mutex_lock(&s->efr_lock);
+
lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
/* Open the LCR divisors for configuration */
@@ -519,6 +535,8 @@ static int sc16is7xx_set_baud(struct uart_port *port, int baud)
/* Put LCR back to the normal mode */
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+ mutex_unlock(&s->efr_lock);
+
sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
SC16IS7XX_MCR_CLKSEL_BIT,
prescaler);
@@ -701,6 +719,8 @@ static void sc16is7xx_ist(struct kthread_work *ws)
{
struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work);
+ mutex_lock(&s->efr_lock);
+
while (1) {
bool keep_polling = false;
int i;
@@ -710,6 +730,8 @@ static void sc16is7xx_ist(struct kthread_work *ws)
if (!keep_polling)
break;
}
+
+ mutex_unlock(&s->efr_lock);
}
static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
@@ -904,6 +926,9 @@ static void sc16is7xx_set_termios(struct uart_port *port,
if (!(termios->c_cflag & CREAD))
port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;
+ /* As above, claim the mutex while accessing the EFR. */
+ mutex_lock(&s->efr_lock);
+
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
SC16IS7XX_LCR_CONF_MODE_B);
@@ -925,6 +950,8 @@ static void sc16is7xx_set_termios(struct uart_port *port,
/* Update LCR register */
sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+ mutex_unlock(&s->efr_lock);
+
/* Get baud rate generator configuration */
baud = uart_get_baud_rate(port, termios, old,
port->uartclk / 16 / 4 / 0xffff,
@@ -1187,6 +1214,7 @@ static int sc16is7xx_probe(struct device *dev,
s->regmap = regmap;
s->devtype = devtype;
dev_set_drvdata(dev, s);
+ mutex_init(&s->efr_lock);
kthread_init_worker(&s->kworker);
kthread_init_work(&s->irq_work, sc16is7xx_ist);