summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_iucv.c4
-rw-r--r--drivers/tty/hvc/hvc_xen.c47
-rw-r--r--drivers/tty/mxser.c15
-rw-r--r--drivers/tty/n_gsm.c55
-rw-r--r--drivers/tty/n_tty.c4
-rw-r--r--drivers/tty/serial/8250/8250_fintek.c19
-rw-r--r--drivers/tty/serial/8250/8250_gsc.c2
-rw-r--r--drivers/tty/serial/8250/8250_mid.c19
-rw-r--r--drivers/tty/serial/8250/8250_of.c11
-rw-r--r--drivers/tty/serial/8250/8250_pci.c147
-rw-r--r--drivers/tty/serial/8250/8250_port.c14
-rw-r--r--drivers/tty/serial/amba-pl010.c3
-rw-r--r--drivers/tty/serial/amba-pl011.c28
-rw-r--r--drivers/tty/serial/atmel_serial.c14
-rw-r--r--drivers/tty/serial/imx.c2
-rw-r--r--drivers/tty/serial/kgdboc.c6
-rw-r--r--drivers/tty/serial/msm_serial.c3
-rw-r--r--drivers/tty/serial/samsung.c5
-rw-r--r--drivers/tty/serial/serial-tegra.c4
-rw-r--r--drivers/tty/serial/serial_core.c20
-rw-r--r--drivers/tty/serial/stm32-usart.c2
-rw-r--r--drivers/tty/serial/uartlite.c2
-rw-r--r--drivers/tty/tty_buffer.c3
-rw-r--r--drivers/tty/vt/vt_ioctl.c5
24 files changed, 307 insertions, 127 deletions
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index 2af1e5751bd6..796fbff623f6 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -1470,7 +1470,9 @@ out_error:
*/
static int __init hvc_iucv_config(char *val)
{
- return kstrtoul(val, 10, &hvc_iucv_devices);
+ if (kstrtoul(val, 10, &hvc_iucv_devices))
+ pr_warn("hvc_iucv= invalid parameter value '%s'\n", val);
+ return 1;
}
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 5ef08905fe05..2d2d04c07140 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -37,6 +37,8 @@ struct xencons_info {
struct xenbus_device *xbdev;
struct xencons_interface *intf;
unsigned int evtchn;
+ XENCONS_RING_IDX out_cons;
+ unsigned int out_cons_same;
struct hvc_struct *hvc;
int irq;
int vtermno;
@@ -86,7 +88,11 @@ static int __write_console(struct xencons_info *xencons,
cons = intf->out_cons;
prod = intf->out_prod;
mb(); /* update queue values before going on */
- BUG_ON((prod - cons) > sizeof(intf->out));
+
+ if ((prod - cons) > sizeof(intf->out)) {
+ pr_err_once("xencons: Illegal ring page indices");
+ return -EINVAL;
+ }
while ((sent < len) && ((prod - cons) < sizeof(intf->out)))
intf->out[MASK_XENCONS_IDX(prod++, intf->out)] = data[sent++];
@@ -114,7 +120,10 @@ static int domU_write_console(uint32_t vtermno, const char *data, int len)
*/
while (len) {
int sent = __write_console(cons, data, len);
-
+
+ if (sent < 0)
+ return sent;
+
data += sent;
len -= sent;
@@ -131,6 +140,8 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
XENCONS_RING_IDX cons, prod;
int recv = 0;
struct xencons_info *xencons = vtermno_to_xencons(vtermno);
+ unsigned int eoiflag = 0;
+
if (xencons == NULL)
return -EINVAL;
intf = xencons->intf;
@@ -138,7 +149,11 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
cons = intf->in_cons;
prod = intf->in_prod;
mb(); /* get pointers before reading ring */
- BUG_ON((prod - cons) > sizeof(intf->in));
+
+ if ((prod - cons) > sizeof(intf->in)) {
+ pr_err_once("xencons: Illegal ring page indices");
+ return -EINVAL;
+ }
while (cons != prod && recv < len)
buf[recv++] = intf->in[MASK_XENCONS_IDX(cons++, intf->in)];
@@ -146,7 +161,27 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
mb(); /* read ring before consuming */
intf->in_cons = cons;
- notify_daemon(xencons);
+ /*
+ * When to mark interrupt having been spurious:
+ * - there was no new data to be read, and
+ * - the backend did not consume some output bytes, and
+ * - the previous round with no read data didn't see consumed bytes
+ * (we might have a race with an interrupt being in flight while
+ * updating xencons->out_cons, so account for that by allowing one
+ * round without any visible reason)
+ */
+ if (intf->out_cons != xencons->out_cons) {
+ xencons->out_cons = intf->out_cons;
+ xencons->out_cons_same = 0;
+ }
+ if (recv) {
+ notify_daemon(xencons);
+ } else if (xencons->out_cons_same++ > 1) {
+ eoiflag = XEN_EOI_FLAG_SPURIOUS;
+ }
+
+ xen_irq_lateeoi(xencons->irq, eoiflag);
+
return recv;
}
@@ -375,7 +410,7 @@ static int xencons_connect_backend(struct xenbus_device *dev,
if (ret)
return ret;
info->evtchn = evtchn;
- irq = bind_evtchn_to_irq(evtchn);
+ irq = bind_interdomain_evtchn_to_irq_lateeoi(dev->otherend_id, evtchn);
if (irq < 0)
return irq;
info->irq = irq;
@@ -539,7 +574,7 @@ static int __init xen_hvc_init(void)
return r;
info = vtermno_to_xencons(HVC_COOKIE);
- info->irq = bind_evtchn_to_irq(info->evtchn);
+ info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn);
}
if (info->irq < 0)
info->irq = 0; /* NO_IRQ */
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 9d00ff5ef961..085dc8dd1327 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -861,6 +861,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
struct mxser_port *info = container_of(port, struct mxser_port, port);
unsigned long page;
unsigned long flags;
+ int ret;
page = __get_free_page(GFP_KERNEL);
if (!page)
@@ -870,9 +871,9 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (!info->ioaddr || !info->type) {
set_bit(TTY_IO_ERROR, &tty->flags);
- free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
- return 0;
+ ret = 0;
+ goto err_free_xmit;
}
info->port.xmit_buf = (unsigned char *) page;
@@ -898,8 +899,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
if (capable(CAP_SYS_ADMIN)) {
set_bit(TTY_IO_ERROR, &tty->flags);
return 0;
- } else
- return -ENODEV;
+ }
+
+ ret = -ENODEV;
+ goto err_free_xmit;
}
/*
@@ -944,6 +947,10 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
spin_unlock_irqrestore(&info->slock, flags);
return 0;
+err_free_xmit:
+ free_page(page);
+ info->port.xmit_buf = NULL;
+ return ret;
}
/*
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 38eb49ba361f..c38f06139ccf 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -72,6 +72,8 @@ module_param(debug, int, 0600);
*/
#define MAX_MRU 1500
#define MAX_MTU 1500
+/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
+#define PROT_OVERHEAD 7
#define GSM_NET_TX_TIMEOUT (HZ*10)
/**
@@ -313,6 +315,7 @@ static struct tty_driver *gsm_tty_driver;
#define GSM1_ESCAPE_BITS 0x20
#define XON 0x11
#define XOFF 0x13
+#define ISO_IEC_646_MASK 0x7F
static const struct tty_port_operations gsm_port_ops;
@@ -427,7 +430,7 @@ static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
modembits |= MDM_RTR;
if (dlci->modem_tx & TIOCM_RI)
modembits |= MDM_IC;
- if (dlci->modem_tx & TIOCM_CD)
+ if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
modembits |= MDM_DV;
return modembits;
}
@@ -531,7 +534,8 @@ static int gsm_stuff_frame(const u8 *input, u8 *output, int len)
int olen = 0;
while (len--) {
if (*input == GSM1_SOF || *input == GSM1_ESCAPE
- || *input == XON || *input == XOFF) {
+ || (*input & ISO_IEC_646_MASK) == XON
+ || (*input & ISO_IEC_646_MASK) == XOFF) {
*output++ = GSM1_ESCAPE;
*output++ = *input++ ^ GSM1_ESCAPE_BITS;
olen++;
@@ -821,7 +825,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
break;
case 2: /* Unstructed with modem bits.
Always one byte as we never send inline break data */
- *dp++ = gsm_encode_modem(dlci);
+ *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
break;
}
WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len);
@@ -1298,11 +1302,12 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
{
- struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
+ struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype);
if (msg == NULL)
return;
- msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */
- memcpy(msg->data + 1, ctrl->data, ctrl->len);
+ msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */
+ msg->data[1] = (ctrl->len << 1) | EA;
+ memcpy(msg->data + 2, ctrl->data, ctrl->len);
gsm_data_queue(gsm->dlci[0], msg);
}
@@ -1325,7 +1330,6 @@ static void gsm_control_retransmit(struct timer_list *t)
spin_lock_irqsave(&gsm->control_lock, flags);
ctrl = gsm->pending_cmd;
if (ctrl) {
- gsm->cretries--;
if (gsm->cretries == 0) {
gsm->pending_cmd = NULL;
ctrl->error = -ETIMEDOUT;
@@ -1334,6 +1338,7 @@ static void gsm_control_retransmit(struct timer_list *t)
wake_up(&gsm->event);
return;
}
+ gsm->cretries--;
gsm_control_transmit(gsm, ctrl);
mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
}
@@ -1374,7 +1379,7 @@ retry:
/* If DLCI0 is in ADM mode skip retries, it won't respond */
if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
- gsm->cretries = 1;
+ gsm->cretries = 0;
else
gsm->cretries = gsm->n2;
@@ -1488,7 +1493,7 @@ static void gsm_dlci_t1(struct timer_list *t)
dlci->mode = DLCI_MODE_ADM;
gsm_dlci_open(dlci);
} else {
- gsm_dlci_close(dlci);
+ gsm_dlci_begin_close(dlci); /* prevent half open link */
}
break;
@@ -1720,7 +1725,12 @@ static void gsm_dlci_release(struct gsm_dlci *dlci)
gsm_destroy_network(dlci);
mutex_unlock(&dlci->mutex);
- tty_hangup(tty);
+ /* We cannot use tty_hangup() because in tty_kref_put() the tty
+ * driver assumes that the hangup queue is free and reuses it to
+ * queue release_one_tty() -> NULL pointer panic in
+ * process_one_work().
+ */
+ tty_vhangup(tty);
tty_port_tty_set(&dlci->port, NULL);
tty_kref_put(tty);
@@ -1803,7 +1813,6 @@ static void gsm_queue(struct gsm_mux *gsm)
gsm_response(gsm, address, UA);
gsm_dlci_close(dlci);
break;
- case UA:
case UA|PF:
if (cr == 0 || dlci == NULL)
break;
@@ -1954,7 +1963,8 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
}
/* Any partial frame was a runt so go back to start */
if (gsm->state != GSM_START) {
- gsm->malformed++;
+ if (gsm->state != GSM_SEARCH)
+ gsm->malformed++;
gsm->state = GSM_START;
}
/* A SOF in GSM_START means we are still reading idling or
@@ -2091,6 +2101,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
gsm_dlci_release(gsm->dlci[i]);
mutex_unlock(&gsm->mutex);
/* Now wipe the queues */
+ tty_ldisc_flush(gsm->tty);
list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
kfree(txq);
INIT_LIST_HEAD(&gsm->tx_list);
@@ -2201,7 +2212,7 @@ static struct gsm_mux *gsm_alloc_mux(void)
kfree(gsm);
return NULL;
}
- gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL);
+ gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
if (gsm->txframe == NULL) {
kfree(gsm->buf);
kfree(gsm);
@@ -2257,7 +2268,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
/* Check the MRU/MTU range looks sane */
if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
return -EINVAL;
- if (c->n2 < 3)
+ if (c->n2 > 255)
return -EINVAL;
if (c->encapsulation > 1) /* Basic, advanced, no I */
return -EINVAL;
@@ -2872,19 +2883,17 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
{
- u8 modembits[5];
+ u8 modembits[3];
struct gsm_control *ctrl;
int len = 2;
- if (brk)
+ modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
+ modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
+ if (brk) {
+ modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
len++;
-
- modembits[0] = len << 1 | EA; /* Data bytes */
- modembits[1] = dlci->addr << 2 | 3; /* DLCI, EA, 1 */
- modembits[2] = gsm_encode_modem(dlci) << 1 | EA;
- if (brk)
- modembits[3] = brk << 4 | 2 | EA; /* Valid, EA */
- ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1);
+ }
+ ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
if (ctrl == NULL)
return -ENOMEM;
return gsm_control_wait(dlci->gsm, ctrl);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f9c584244f72..6a55f06c0af2 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1377,7 +1377,7 @@ handle_newline:
put_tty_queue(c, ldata);
smp_store_release(&ldata->canon_head, ldata->read_head);
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
- wake_up_interruptible_poll(&tty->read_wait, EPOLLIN);
+ wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
return 0;
}
}
@@ -1658,7 +1658,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
if (read_cnt(ldata)) {
kill_fasync(&tty->fasync, SIGIO, POLL_IN);
- wake_up_interruptible_poll(&tty->read_wait, EPOLLIN);
+ wake_up_interruptible_poll(&tty->read_wait, EPOLLIN | EPOLLRDNORM);
}
}
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 31c91c2f8c6e..e24161004ddc 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -285,24 +285,6 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
}
}
-static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
- struct fintek_8250 *pdata)
-{
- sio_write_reg(pdata, LDN, pdata->index);
-
- switch (pdata->pid) {
- case CHIP_ID_F81866: /* set uart clock for high speed serial mode */
- sio_write_mask_reg(pdata, F81866_UART_CLK,
- F81866_UART_CLK_MASK,
- F81866_UART_CLK_14_769MHZ);
-
- uart->port.uartclk = 921600 * 16;
- break;
- default: /* leave clock speed untouched */
- break;
- }
-}
-
static void fintek_8250_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
@@ -422,7 +404,6 @@ static int probe_setup_port(struct fintek_8250 *pdata,
fintek_8250_set_irq_mode(pdata, level_mode);
fintek_8250_set_max_fifo(pdata);
- fintek_8250_goto_highspeed(uart, pdata);
fintek_8250_exit_key(addr[i]);
diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index 0809ae2aa9b1..51cc985216ff 100644
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -26,7 +26,7 @@ static int __init serial_init_chip(struct parisc_device *dev)
unsigned long address;
int err;
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && defined(CONFIG_IOSAPIC)
if (!dev->irq && (dev->id.sversion == 0xad))
dev->irq = iosapic_serial_irq(dev);
#endif
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index efa0515139f8..e6c1791609dd 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -73,6 +73,11 @@ static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void pnw_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int tng_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -124,6 +129,11 @@ static int tng_setup(struct mid8250 *mid, struct uart_port *p)
return 0;
}
+static void tng_exit(struct mid8250 *mid)
+{
+ pci_dev_put(mid->dma_dev);
+}
+
static int dnv_handle_irq(struct uart_port *p)
{
struct mid8250 *mid = p->private_data;
@@ -330,9 +340,9 @@ static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_drvdata(pdev, mid);
return 0;
+
err:
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
return ret;
}
@@ -342,8 +352,7 @@ static void mid8250_remove(struct pci_dev *pdev)
serial8250_unregister_port(mid->line);
- if (mid->board->exit)
- mid->board->exit(mid);
+ mid->board->exit(mid);
}
static const struct mid8250_board pnw_board = {
@@ -351,6 +360,7 @@ static const struct mid8250_board pnw_board = {
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
+ .exit = pnw_exit,
};
static const struct mid8250_board tng_board = {
@@ -358,6 +368,7 @@ static const struct mid8250_board tng_board = {
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
+ .exit = tng_exit,
};
static const struct mid8250_board dnv_board = {
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 9ba31701a372..a9b0a84b1e43 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -105,8 +105,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
port->mapsize = resource_size(&resource);
/* Check for shifted address mapping */
- if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+ if (of_property_read_u32(np, "reg-offset", &prop) == 0) {
+ if (prop >= port->mapsize) {
+ dev_warn(&ofdev->dev, "reg-offset %u exceeds region size %pa\n",
+ prop, &port->mapsize);
+ ret = -EINVAL;
+ goto err_unprepare;
+ }
+
port->mapbase += prop;
+ port->mapsize -= prop;
+ }
port->iotype = UPIO_MEM;
if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index a2bb103f22fc..92e2ee278523 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1351,29 +1351,33 @@ pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
{
int scr;
int lcr;
- int actual_baud;
- int tolerance;
- for (scr = 5 ; scr <= 15 ; scr++) {
- actual_baud = 921600 * 16 / scr;
- tolerance = actual_baud / 50;
+ for (scr = 16; scr > 4; scr--) {
+ unsigned int maxrate = port->uartclk / scr;
+ unsigned int divisor = max(maxrate / baud, 1U);
+ int delta = maxrate / divisor - baud;
- if ((baud < actual_baud + tolerance) &&
- (baud > actual_baud - tolerance)) {
+ if (baud > maxrate + baud / 50)
+ continue;
+ if (delta > baud / 50)
+ divisor++;
+
+ if (divisor > 0xffff)
+ continue;
+
+ /* Update delta due to possible divisor change */
+ delta = maxrate / divisor - baud;
+ if (abs(delta) < baud / 50) {
lcr = serial_port_in(port, UART_LCR);
serial_port_out(port, UART_LCR, lcr | 0x80);
-
- serial_port_out(port, UART_DLL, 1);
- serial_port_out(port, UART_DLM, 0);
+ serial_port_out(port, UART_DLL, divisor & 0xff);
+ serial_port_out(port, UART_DLM, divisor >> 8 & 0xff);
serial_port_out(port, 2, 16 - scr);
serial_port_out(port, UART_LCR, lcr);
return;
- } else if (baud > actual_baud) {
- break;
}
}
- serial8250_do_set_divisor(port, baud, quot, quot_frac);
}
static int pci_pericom_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -2285,7 +2289,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_pericom_setup_four_at_eight,
},
{
- .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
.device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -2293,6 +2297,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup_four_at_eight,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -2896,7 +2907,7 @@ enum pci_board_num_t {
pbn_panacom2,
pbn_panacom4,
pbn_plx_romulus,
- pbn_endrun_2_4000000,
+ pbn_endrun_2_3906250,
pbn_oxsemi,
pbn_oxsemi_1_4000000,
pbn_oxsemi_2_4000000,
@@ -3423,10 +3434,10 @@ static struct pciserial_board pci_boards[] = {
* signal now many ports are available
* 2 port 952 Uart support
*/
- [pbn_endrun_2_4000000] = {
+ [pbn_endrun_2_3906250] = {
.flags = FL_BASE0,
.num_ports = 2,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
@@ -4334,7 +4345,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
*/
{ PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_endrun_2_4000000 },
+ pbn_endrun_2_3906250 },
/*
* Quatech cards. These actually have configurable clocks but for
* now we just use the default.
@@ -5119,8 +5130,30 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
pbn_b2_4_115200 },
+ /* Brainboxes Devices */
+ /*
+ * Brainboxes UC-101
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0BA1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
/*
- * BrainBoxes UC-260
+ * Brainboxes UC-235/246
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0AA1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_1_115200 },
+ /*
+ * Brainboxes UC-257
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0861,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
+ /*
+ * Brainboxes UC-260/271/701/756
*/
{ PCI_VENDOR_ID_INTASHIELD, 0x0D21,
PCI_ANY_ID, PCI_ANY_ID,
@@ -5128,7 +5161,81 @@ static const struct pci_device_id serial_pci_tbl[] = {
pbn_b2_4_115200 },
{ PCI_VENDOR_ID_INTASHIELD, 0x0E34,
PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+ PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+ pbn_b2_4_115200 },
+ /*
+ * Brainboxes UC-268
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0841,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_4_115200 },
+ /*
+ * Brainboxes UC-275/279
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0881,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_8_115200 },
+ /*
+ * Brainboxes UC-302
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x08E1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
+ /*
+ * Brainboxes UC-310
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x08C1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
+ /*
+ * Brainboxes UC-313
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x08A3,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
+ /*
+ * Brainboxes UC-320/324
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0A61,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_1_115200 },
+ /*
+ * Brainboxes UC-346
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0B02,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_4_115200 },
+ /*
+ * Brainboxes UC-357
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0A81,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0A83,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
+ /*
+ * Brainboxes UC-368
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0C41,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_4_115200 },
+ /*
+ * Brainboxes UC-420/431
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0921,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
pbn_b2_4_115200 },
/*
* Perle PCI-RAS cards
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 777ef1a9591c..c1891c55897a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1545,6 +1545,18 @@ static inline void start_tx_rs485(struct uart_port *port)
if (!(up->port.rs485.flags & SER_RS485_RX_DURING_TX))
serial8250_stop_rx(&up->port);
+ /*
+ * While serial8250_em485_handle_stop_tx() is a noop if
+ * em485->active_timer != &em485->stop_tx_timer, it might happen that
+ * the timer is still armed and triggers only after the current bunch of
+ * chars is send and em485->active_timer == &em485->stop_tx_timer again.
+ * So cancel the timer. There is still a theoretical race condition if
+ * the timer is already running and only comes around to check for
+ * em485->active_timer when &em485->stop_tx_timer is armed again.
+ */
+ if (em485->active_timer == &em485->stop_tx_timer)
+ hrtimer_try_to_cancel(&em485->stop_tx_timer);
+
em485->active_timer = NULL;
mcr = serial8250_in_MCR(up);
@@ -3172,7 +3184,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
serial8250_set_divisor(port, baud, quot, frac);
serial_port_out(port, UART_LCR, up->lcr);
- serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
+ serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
}
/*
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2c37d11726ab..13f882e5e7b7 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -452,14 +452,11 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
if ((termios->c_cflag & CREAD) == 0)
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
- /* first, disable everything */
old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
- writel(0, uap->port.membase + UART010_CR);
-
/* Set baud rate */
quot -= 1;
writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 16720c97a4dd..0bd8c05d72d6 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2095,31 +2095,12 @@ static const char *pl011_type(struct uart_port *port)
}
/*
- * Release the memory region(s) being used by 'port'
- */
-static void pl011_release_port(struct uart_port *port)
-{
- release_mem_region(port->mapbase, SZ_4K);
-}
-
-/*
- * Request the memory region(s) being used by 'port'
- */
-static int pl011_request_port(struct uart_port *port)
-{
- return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
- != NULL ? 0 : -EBUSY;
-}
-
-/*
* Configure/autoconfigure the port.
*/
static void pl011_config_port(struct uart_port *port, int flags)
{
- if (flags & UART_CONFIG_TYPE) {
+ if (flags & UART_CONFIG_TYPE)
port->type = PORT_AMBA;
- pl011_request_port(port);
- }
}
/*
@@ -2134,6 +2115,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
+ if (port->mapbase != (unsigned long) ser->iomem_base)
+ ret = -EINVAL;
return ret;
}
@@ -2151,8 +2134,6 @@ static const struct uart_ops amba_pl011_pops = {
.flush_buffer = pl011_dma_flush_buffer,
.set_termios = pl011_set_termios,
.type = pl011_type,
- .release_port = pl011_release_port,
- .request_port = pl011_request_port,
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
@@ -2182,8 +2163,6 @@ static const struct uart_ops sbsa_uart_pops = {
.shutdown = sbsa_uart_shutdown,
.set_termios = sbsa_uart_set_termios,
.type = pl011_type,
- .release_port = pl011_release_port,
- .request_port = pl011_request_port,
.config_port = pl011_config_port,
.verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
@@ -2770,6 +2749,7 @@ MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
static const struct acpi_device_id sbsa_uart_acpi_match[] = {
{ "ARMH0011", 0 },
+ { "ARMHB000", 0 },
{},
};
MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 8a909d556185..3b2c25bd2e06 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1002,6 +1002,13 @@ static void atmel_tx_dma(struct uart_port *port)
desc->callback = atmel_complete_tx_dma;
desc->callback_param = atmel_port;
atmel_port->cookie_tx = dmaengine_submit(desc);
+ if (dma_submit_error(atmel_port->cookie_tx)) {
+ dev_err(port->dev, "dma_submit_error %d\n",
+ atmel_port->cookie_tx);
+ return;
+ }
+
+ dma_async_issue_pending(chan);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -1262,6 +1269,13 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
desc->callback_param = port;
atmel_port->desc_rx = desc;
atmel_port->cookie_rx = dmaengine_submit(desc);
+ if (dma_submit_error(atmel_port->cookie_rx)) {
+ dev_err(port->dev, "dma_submit_error %d\n",
+ atmel_port->cookie_rx);
+ goto chan_err;
+ }
+
+ dma_async_issue_pending(atmel_port->chan_rx);
return 0;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dd92afdee2d2..c72a7cda4638 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1425,7 +1425,7 @@ static int imx_uart_startup(struct uart_port *port)
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4) & ~UCR4_OREN;
- if (!sport->dma_is_enabled)
+ if (!dma_is_inited)
ucr4 |= UCR4_OREN;
imx_uart_writel(sport, ucr4, UCR4);
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index f5608ad68ae1..6d4792ec9e5f 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -391,16 +391,16 @@ static int kgdboc_option_setup(char *opt)
{
if (!opt) {
pr_err("config string not provided\n");
- return -EINVAL;
+ return 1;
}
if (strlen(opt) >= MAX_CONFIG_LEN) {
pr_err("config string too long\n");
- return -ENOSPC;
+ return 1;
}
strcpy(config, opt);
- return 0;
+ return 1;
}
__setup("kgdboc=", kgdboc_option_setup);
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e0718ee5d42a..5129c2dfbe07 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -603,6 +603,9 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
u32 val;
int ret;
+ if (IS_ENABLED(CONFIG_CONSOLE_POLL))
+ return;
+
if (!dma->chan)
return;
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index c7683beb3412..6040d5a6139a 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -761,11 +761,8 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
goto out;
}
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
- spin_unlock(&port->lock);
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
- spin_lock(&port->lock);
- }
if (uart_circ_empty(xmit))
s3c24xx_serial_stop_tx(port);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 64f18bf1e694..74c21152367a 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1494,7 +1494,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = {
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
@@ -1505,7 +1505,7 @@ static struct tegra_uart_chip_data tegra30_uart_chip_data = {
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 38ee13bbcab8..7cc7bd8aca0f 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -160,7 +160,7 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise)
int RTS_after_send = !!(uport->rs485.flags & SER_RS485_RTS_AFTER_SEND);
if (raise) {
- if (rs485_on && !RTS_after_send) {
+ if (rs485_on && RTS_after_send) {
uart_set_mctrl(uport, TIOCM_DTR);
uart_clear_mctrl(uport, TIOCM_RTS);
} else {
@@ -169,7 +169,7 @@ static void uart_port_dtr_rts(struct uart_port *uport, int raise)
} else {
unsigned int clear = TIOCM_DTR;
- clear |= (!rs485_on || !RTS_after_send) ? TIOCM_RTS : 0;
+ clear |= (!rs485_on || RTS_after_send) ? TIOCM_RTS : 0;
uart_clear_mctrl(uport, clear);
}
}
@@ -1573,6 +1573,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = uart_port_check(state);
+ char *buf;
/*
* At this point, we stop accepting input. To do this, we
@@ -1594,8 +1595,18 @@ static void uart_tty_port_shutdown(struct tty_port *port)
*/
tty_port_set_suspended(port, 0);
- uart_change_pm(state, UART_PM_STATE_OFF);
+ /*
+ * Free the transmit buffer.
+ */
+ spin_lock_irq(&uport->lock);
+ buf = state->xmit.buf;
+ state->xmit.buf = NULL;
+ spin_unlock_irq(&uport->lock);
+
+ if (buf)
+ free_page((unsigned long)buf);
+ uart_change_pm(state, UART_PM_STATE_OFF);
}
static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
@@ -2384,7 +2395,8 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
* We probably don't need a spinlock around this, but
*/
spin_lock_irqsave(&port->lock, flags);
- port->ops->set_mctrl(port, port->mctrl & TIOCM_DTR);
+ port->mctrl &= TIOCM_DTR;
+ port->ops->set_mctrl(port, port->mctrl);
spin_unlock_irqrestore(&port->lock, flags);
/*
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 23b7bdae173c..d517b911cd04 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -536,7 +536,7 @@ static void stm32_start_tx(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
- if (uart_circ_empty(xmit))
+ if (uart_circ_empty(xmit) && !port->x_char)
return;
stm32_transmit_chars(port);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 56066d93a65b..9a4049c894f7 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -618,7 +618,7 @@ static struct uart_driver ulite_uart_driver = {
*
* Returns: 0 on success, <0 otherwise
*/
-static int ulite_assign(struct device *dev, int id, u32 base, int irq,
+static int ulite_assign(struct device *dev, int id, phys_addr_t base, int irq,
struct uartlite_data *pdata)
{
struct uart_port *port;
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index ec145a59f199..bb148dbfbb88 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -534,6 +534,9 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count)
break;
head->read += count;
+
+ if (need_resched())
+ cond_resched();
}
mutex_unlock(&buf->lock);
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 167c72726c5a..312857168dad 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -691,6 +691,7 @@ int vt_ioctl(struct tty_struct *tty,
ret = -ENXIO;
else {
arg--;
+ arg = array_index_nospec(arg, MAX_NR_CONSOLES);
console_lock();
ret = vc_allocate(arg);
console_unlock();
@@ -715,9 +716,9 @@ int vt_ioctl(struct tty_struct *tty,
if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
ret = -ENXIO;
else {
- vsa.console = array_index_nospec(vsa.console,
- MAX_NR_CONSOLES + 1);
vsa.console--;
+ vsa.console = array_index_nospec(vsa.console,
+ MAX_NR_CONSOLES);
console_lock();
ret = vc_allocate(vsa.console);
if (ret == 0) {
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-15 15:20:27 +0000