diff options
Diffstat (limited to 'drivers/usb/dwc3/core.h')
| -rw-r--r-- | drivers/usb/dwc3/core.h | 59 |
1 files changed, 46 insertions, 13 deletions
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 654050684f4f..45d6de5107c7 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -86,6 +86,7 @@ #define DWC3_GCTL 0xc110 #define DWC3_GEVTEN 0xc114 #define DWC3_GSTS 0xc118 +#define DWC3_GUCTL1 0xc11c #define DWC3_GSNPSID 0xc120 #define DWC3_GGPIO 0xc124 #define DWC3_GUID 0xc128 @@ -138,10 +139,12 @@ #define DWC3_DGCMDPAR 0xc710 #define DWC3_DGCMD 0xc714 #define DWC3_DALEPENA 0xc720 -#define DWC3_DEPCMDPAR2(n) (0xc800 + (n * 0x10)) -#define DWC3_DEPCMDPAR1(n) (0xc804 + (n * 0x10)) -#define DWC3_DEPCMDPAR0(n) (0xc808 + (n * 0x10)) -#define DWC3_DEPCMD(n) (0xc80c + (n * 0x10)) + +#define DWC3_DEP_BASE(n) (0xc800 + (n * 0x10)) +#define DWC3_DEPCMDPAR2 0x00 +#define DWC3_DEPCMDPAR1 0x04 +#define DWC3_DEPCMDPAR0 0x08 +#define DWC3_DEPCMD 0x0c /* OTG Registers */ #define DWC3_OCFG 0xcc00 @@ -231,6 +234,14 @@ #define DWC3_GEVNTSIZ_INTMASK (1 << 31) #define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff) +/* Global HWPARAMS0 Register */ +#define DWC3_GHWPARAMS0_USB3_MODE(n) ((n) & 0x3) +#define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7) +#define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3) +#define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff) +#define DWC3_GHWPARAMS0_SDWIDTH(n) (((n) >> 16) & 0xff) +#define DWC3_GHWPARAMS0_AWIDTH(n) (((n) >> 24) & 0xff) + /* Global HWPARAMS1 Register */ #define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24) #define DWC3_GHWPARAMS1_EN_PWROPT_NO 0 @@ -260,6 +271,10 @@ /* Global HWPARAMS6 Register */ #define DWC3_GHWPARAMS6_EN_FPGA (1 << 7) +/* Global HWPARAMS7 Register */ +#define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff) +#define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff) + /* Global Frame Length Adjustment Register */ #define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7) #define DWC3_GFLADJ_30MHZ_MASK 0x3f @@ -468,6 +483,8 @@ struct dwc3_event_buffer { * @endpoint: usb endpoint * @pending_list: list of pending requests for this endpoint * @started_list: list of started requests on this endpoint + * @lock: spinlock for endpoint request queue traversal + * @regs: pointer to first endpoint register * @trb_pool: array of transaction buffers * @trb_pool_dma: dma address of @trb_pool * @trb_enqueue: enqueue 'pointer' into TRB array @@ -480,6 +497,8 @@ struct dwc3_event_buffer { * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK * @resource_index: Resource transfer index * @interval: the interval on which the ISOC transfer is started + * @allocated_requests: number of requests allocated + * @queued_requests: number of requests queued for transfer * @name: a human readable name e.g. ep1out-bulk * @direction: true for TX, false for RX * @stream_capable: true when streams are enabled @@ -489,6 +508,9 @@ struct dwc3_ep { struct list_head pending_list; struct list_head started_list; + spinlock_t lock; + void __iomem *regs; + struct dwc3_trb *trb_pool; dma_addr_t trb_pool_dma; const struct usb_ss_ep_comp_descriptor *comp_desc; @@ -521,6 +543,8 @@ struct dwc3_ep { u8 number; u8 type; u8 resource_index; + u32 allocated_requests; + u32 queued_requests; u32 interval; char name[20]; @@ -712,6 +736,8 @@ struct dwc3_scratchpad_array { * @gadget_driver: pointer to the gadget driver * @regs: base address for our registers * @regs_size: address space size + * @fladj: frame length adjustment + * @irq_gadget: peripheral controller's IRQ number * @nr_scratch: number of scratch buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) @@ -744,6 +770,7 @@ struct dwc3_scratchpad_array { * @lpm_nyet_threshold: LPM NYET response threshold * @hird_threshold: HIRD threshold * @hsphy_interface: "utmi" or "ulpi" + * @connected: true when we're connected to a host, false otherwise * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer @@ -754,6 +781,7 @@ struct dwc3_scratchpad_array { * 0 - utmi_sleep_n * 1 - utmi_l1_suspend_n * @is_fpga: true when we are using the FPGA board + * @pending_events: true when we have pending IRQs to be handled * @pullups_connected: true when Run/Stop bit is set * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued @@ -818,10 +846,8 @@ struct dwc3 { enum usb_dr_mode dr_mode; - /* used for suspend/resume */ - u32 dcfg; - u32 gctl; - + u32 fladj; + u32 irq_gadget; u32 nr_scratch; u32 u1u2; u32 maximum_speed; @@ -860,7 +886,7 @@ struct dwc3 { * just so dwc31 revisions are always larger than dwc3. */ #define DWC3_REVISION_IS_DWC31 0x80000000 -#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_USB31) +#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31) enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -890,6 +916,7 @@ struct dwc3 { const char *hsphy_interface; + unsigned connected:1; unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; @@ -897,6 +924,7 @@ struct dwc3 { unsigned has_lpm_erratum:1; unsigned is_utmi_l1_suspend:1; unsigned is_fpga:1; + unsigned pending_events:1; unsigned pullups_connected:1; unsigned setup_packet_pending:1; unsigned three_stage_setup:1; @@ -1094,8 +1122,8 @@ void dwc3_gadget_exit(struct dwc3 *dwc); int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); int dwc3_gadget_get_link_state(struct dwc3 *dwc); int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); -int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, - unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); +int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, + struct dwc3_gadget_ep_cmd_params *params); int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) @@ -1110,8 +1138,8 @@ static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) { return 0; } -static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, - unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, + struct dwc3_gadget_ep_cmd_params *params) { return 0; } static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param) @@ -1122,6 +1150,7 @@ static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, #if !IS_ENABLED(CONFIG_USB_DWC3_HOST) int dwc3_gadget_suspend(struct dwc3 *dwc); int dwc3_gadget_resume(struct dwc3 *dwc); +void dwc3_gadget_process_pending_events(struct dwc3 *dwc); #else static inline int dwc3_gadget_suspend(struct dwc3 *dwc) { @@ -1132,6 +1161,10 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc) { return 0; } + +static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc) +{ +} #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */ #if IS_ENABLED(CONFIG_USB_DWC3_ULPI) |